Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
The ISO operator allows automation ofany type of swing door, whether new or old.
Designed for intensive use, it is suitable forall places where large numbers of people aremoving around: offices, hotels, restaurants…
It is also intended for areas where hygienerules have to be observed and where it is notappropriate to touch door handles: hospitals,clinics, medical surgeries, laboratories…
CharacteristicsMECHANICALSAssembly Horizontal pulling or pushingStructure AluminiumCasing (L x H x D) 600 x 100 x 130 mmWeight 9,5 kgFlasks ABS Shoc Black ULVO plasticProtection index IP32
PERFORMANCESMax. opening angle 120° pushing, 95° pulling with a tolerance of +/- 3°Max. weight of door 1000 mm width Pushing Pulling
250 kg 160 kgPassage width min/max* Pushing Pulling- 1 leaf 650 / 1500 mm 820 / 1500 mm- 2 leaves 1300 / 3000 mm 1640 / 3000 mmOpening / closing time Adjustable from 3 to 6 seconds for a weight of 80 to 250 kg (pushing)Timing, holding open 0 to 60 secondsOutput 2 dry contacts NO (closed/open door position)
ELECTRICAL ENVIRONMENT Supply 230 VAC, 50 HzMax. consumption < 120 WHumidity rate 10 % to 93 % without condensationOperating temperature –15° C to +60° C
STANDARDSCE Electromagnetic compatibility: 2004/108/CE directive, Electrical security -
Low voltage: 2006/95/CEE directive, Construction products: 89/106/CE - 93/68/CE directives, Machines: 2006/42/CE directive
EN 60 335 - 1 Safety of household and similar electrical appliancesEN 61 000 - 6 - 3 EMC: emission for residential, commercial and light-industrial environmentsEN 61 000 – 6 - 2 EMC: immunity for industrial envrionments
FeaturesMaster / slave operation (2 operators)Push & go functionAnti-wind functionOpen / close speed adjustmentHold opening time adjustmentCurtain inhibition angle adjustment IR (70 to 125 °)Internal opening and closing end stops adjustment
Equipment / OptionsMaster / slave communication cable ° IR curtain °Antipanic pulling arm (clutchable rod) ° 6-position key selector °Customised operator (Cover and frame at desired length) ° Intermediate cover (2 operators) °Special lacquering, Special coatings (Stainless steel…), Anodised colour ° Raw finish, Natural satin finish •
• Standard ° Option
PORTALP INTERNATIONALParc d’Activités des Plans • 7, rue de l’Arcelle3 8 6 0 0 F O N T A I N E • F R A N C ETél. +33 (0)4 76 26 07 42 • Fax + 33 (0)4 76 27 51 09
w w w . p o r t a l p . c o m EN-D
OC
005
876
C-
0620
11. P
orta
lp r
eser
ves
the
right
to
chan
ge t
he p
rese
nted
pro
duct
s an
d m
ater
ials
with
out
prio
r no
tice.
The
ir de
scrip
tion
cann
ot o
n no
acc
ount
tak
e on
a c
ontr
actu
al a
spec
t -
Pam
plem
ouss
e 04
78
83 9
5 01
- P
hoto
Cre
dits
: Por
talp
- Im
ageS
ourc
e
* See Operator Capacity
LOGICAL UNIT• OPERATOR CONFIGURATION
BY MINI SWITCHES• ADJUSTMENT BY POTENTIOMETER• CONTACT OUTPUTS• MASTER/SLAVE DIALOG• DETECTION / SECURITY /
CONTROL INPUTS
6-position selector3-position mode selectoron the operator
Overall view Protective casingon arm
Switch without contact
ACTUATOR UNIT• MOTOR / TRANSMISSION DEVICE• END-OF-MOVEMENT SYSTEM• INTRINSIC ENERGY RECALL DEVICE
Controls and detectorsISO can be controlled by different control systems such a push-buttons,radars, infrared curtains, contact mats, etc.
Safety devices can also be connected (fire alarm device, electric strikerplates, suckers…).
Elegant and silent, the ISO operator simply turns any doorinto an automatic door.
1
1
2
• 3-POSITION MODE SELECTOR- AUTOMATIC MODE- MANUAL MODE (OFF)- OPEN MODE
• DOOR STATUS LED INDICATOR LIGHT
• ARTICULATED ARM (PUSH) OR ROD(PULLING) / FIXED ARM
• PROTECTION OF ARTICULATIONSAND SHAFTS BY SAFETY-GIVINGAND ELEGANT CASINGS.
34
2
3 4
• The settings for the door movement are automaticallypre-defined by a programme to ensure flowing andsafe movement of the door however heavy it is.If an obstacle gets in the way of the opening orclosing door, the door stops and reopens or reclosesautomatically and gets ready to start again.
• In the event of an electrical power cut, the operatorworks in the same way as a standard door closer:The door closes mechanically and safely via anIntrinsic Mechanical Energy device. The door canthen be used manually.
• The “Push and Go” function brings an appreciableaid to the user for opening, whilst manual operationis allowed: the ISOoperator opens the door auto-matically as soon as the user begins to push the door.
• ISO is designed to work in a windy area. The“anti-wind” function closes the door (pushingoperator) despite the strength of the draught.
• In the case of a double door, 2 ISOoperators areassociated to work as “master and slave”. The masterdoor opens before the slave door, and closes againlast for the right overlapping of the doors.
ISO is a self-teaching electro-mechanicalswing door operator. The door is opened bymicro-controller. In case of power failure, thedoor is closed by an electro-mechanical device.
Its box with rounded curves and all coloursblends in with the top of the doors.
It is compact and offers no fewer high-performancefunctioning and safety characteristics, handlingheavy doors up to 250 kg as a pushing operator.
EMERGENCYEXISTS
WINDYAREAS
INDUSTRY ANDTERTIARY
HOSPITALMEDICAL
100 MM
130 MM
600 MM
COMPASS ARM FORPUSHING ASSEMBLY
SLIDING ARM FORPULLING ASSEMBLY
Antipanic pulling arm
Pushing arm
Pulling arm
The ISOoperator is proposed aspulling (sliding arm) or pushingoperator (compass arm), openingon left or right side.
As pulling assembly, an antipanicbreakable arm can be installed tohandle the leaf in both directions.
Typical applications
HANDICAPPEDPERSON ACCESS
Operator Capacity
0
50
100
150
200
250
300
350
400
450
650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500
Leaf width (mm)
Wei
gh
t (K
g)
Pulling Operator
Pushing Operator