Honeywell POS4NET Suite Getting Started

Installing Honeywell POS4NET Suite

Double-click the Honeywell POS4NET Suite.exe file to install the Honeywell POS4NET Suite software. Follow the instructions presented on the screen.

Note: When first installing the Honeywell USB serial communications driver please reboot the terminal after installation is complete prior to running the POS4NET application.

Configuration Utility

The Configuration Utility allows you to assign a name to a Honeywell device and creates a XML entry for that device. The name is later used by the service object to work with the device. This utility is also used to edit or delete these XML entries.

Validation Utility

The Validation Utility verifies the connection and allows you to work with the connected device. An Advanced view allows you to use all POS4NET operations.

Release Notes

The release notes provide known issues and revision information regarding the software components.

Custom Setup

Custom Setup allows you to select specific components to install. Click the drop-down arrow to select the feature you wish to work with.

To install the feature, sele ct either This feature will be installed on local hard drive or This feature, and all sub featur es, will be installed on local hard drive. Both actions are the same.

Select This feature will not be available if you do not wish to install that component. Getting Started, Rev B - 1 -

Repair, Modify, or Remove (Uninstall Honeywell POS4NET Suite)

To repair, modify or remove click Start -Programs -Honeywell POS4NET Suite and click Uninstall Honey well POS4NET Suite. Uninstall can also be performed by double-clicking Honeywell POS4NET Suite.exe.

The Welcom e to the Ins tallShield Wizard for Honeywell POS4NET dialog b ox wi ll appea r, cli ck th e Next button to proceed to Program Maintenance.

Modify allows you to install additional components. Repair will check for the existence of components and repair them if

they are damaged or not present. Remove uninstalls all components except the HHIDMA component and POS SDK.

The HHIDMA can only be removed through the

Control Panel -Add Remove Programs. Locate Honeywell HHIDMA and select Remove.

The POS SDK can only be removed through

Control Panel -Add Remove Programs. Locate Microsoft POS SDK 1.12 and select Remove

Note: If RemoteMastermind is in use, HHIDMA should not be removed

To perform unattended installation of the service object and the required HHIDMA SDK, execute the following commands from a . command prompt: Silent Service Object Installation

1. Create a new .bat file with a unique name. 2. Update the .bat file with the following 2 commands:

-- to install HHIDMA: msiexec /i "<Path to Honeywell HHIDMA.msi>" /qn 2nd command to install -- Honeywell POS4NET :"< Path to Honeywell POS4NET Suite.exe>" /S /V/qn /VADDLOCAL=ServiceObjects

3. Save the .bat file and run it.

Getting Started, Rev B - 2 -

POS SDK,HHIDMA and RemService Information

Install The RemService service component is required by the POS4NET service object. The RemService.exe is provided with the HHIDMA SDK. The Honeywell POS4NET Suite installs the HHIDMA SDK and sets up the terminal to start the RemService service. Installation of the HHIDMA SDK requires no user interaction.

The POS SDK component is required by POS4NET. The Suite installs the POS SDK

Uninstall The HHIDMA can only be removed through the Control Panel -Add Remove Programs. Locate Honeywell HHIDMA and select Remove.

The POS SDK can only be removed through Control Panel -Add Remove Programs. Locate Microsoft POS SDK 1.12 and select .Remove

Note: If RemoteMastermind is in use, HHIDMA should not be removed.

Getting Started, Rev B - 3 -

Technical Assistance If you need assistance installing or troubleshooting your device, please call your distributor or the nearest technical support office:

North America/Canada Telephone: (800) 782-4263 E-mail: hsmnasupport@honeywell.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: hsmlasupport@honeywell.com Brazil Telephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: brsuporte@honeywell.com Mexico Telephone: (803) 835-8000 E-mail: hsmlasupport@honeywell.com Europe, Middle East, and Africa Telephone: +31 (0) 40 7999 393 Fax: +31 (0) 40 2425 672 E-mail: hsmeurosupport@honeywell.com Hong Kong Telephone: +852-29536436 Fax: +851-2511-3557 E-mail: aptechsupport@honeywell.com Singapore Telephone: +65-6842-7155 Fax: +65-6842-7166 E-mail: aptechsupport@honeywell.com China Telephone: +86 800 828 2803 Fax: +86-512-6762-2560 E-mail: aptechsupport@honeywell.com Japan Telephone: +81-3-3839-8511 Fax: +81-3-3839-8519 E-mail: aptechsupport@honeywell.com

Online Technical Assistance You can also access technical assistance online at www.honeywellaidc.com.

Getting Started, Rev B - 4 -