5
8/20/2019 Power Rapid Traverse http://slidepdf.com/reader/full/power-rapid-traverse 1/5 Power Rapid Traverse    The power rapid traverse mechanism on shapers simply uses power to move the table quickly. Hand power is done away with. The greatest advantage of power rapid traverse is the amount of time saved by its use. It instantly moves the work up to the tool for the cut, thus reducing the time between cuts to little or nothing. Also, when the piece is nished, time is saved, since the table can be loaded or unloaded without interference of the tool and the post.

Power Rapid Traverse

  • Upload
    shinn

  • View
    212

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Power Rapid Traverse

8/20/2019 Power Rapid Traverse

http://slidepdf.com/reader/full/power-rapid-traverse 1/5

Power Rapid Traverse

   The power rapid traverse mechanism onshapers simply uses power to move thetable quickly. Hand power is done away

with. The greatest advantage of power rapidtraverse is the amount of time saved by itsuse. It instantly moves the work up to thetool for the cut, thus reducing the time

between cuts to little or nothing. Also, whenthe piece is nished, time is saved, sincethe table can be loaded or unloaded withoutinterference of the tool and the post.

Page 2: Power Rapid Traverse

8/20/2019 Power Rapid Traverse

http://slidepdf.com/reader/full/power-rapid-traverse 2/5

Page 3: Power Rapid Traverse

8/20/2019 Power Rapid Traverse

http://slidepdf.com/reader/full/power-rapid-traverse 3/5

Worktables

  sually supplied with shapers. !orktablemay be fed hori"ontally either by hand orby power, and it may be ad#usted

vertically to provide for di$erent #obswhich may vary considerably in height.

Page 4: Power Rapid Traverse

8/20/2019 Power Rapid Traverse

http://slidepdf.com/reader/full/power-rapid-traverse 4/5

Tool Head: Vertical and AngularDownfeed

   The tool head is designed to hold the tooland also to be used in ad#usting the toolfor the desired cut. The slide and the

screw permit a considerable amount ofdownfeed, and because of the swivelconstruction between the head and theram, this feed may be vertical or at any

desired angle in the plane of the swivel.

Page 5: Power Rapid Traverse

8/20/2019 Power Rapid Traverse

http://slidepdf.com/reader/full/power-rapid-traverse 5/5

Hydraulic !aper

  %perates under hydraulic power.