NEWproaucts

resistance, and cleanability to awide range of metalworking appli­cations. In addition, the product'sexcellent emulsion stability allowsfor extremely clean, residue-freeoperation, even in difficult waterconditions.

Highly bio-resistant, Tech Cool"35052 provides protection againstbacteria growth without the use ofbiocides, DCHA, or other secondaryamines, Tech Cool" 35052 is extreme­ly low foaming without the use ofundesirable silicone defoamers, evenin foam generating operations suchas creep feed grinding.

Tech Coo135052 has many success­ful applications, including rollthreading, thread tapping, drilling,milling, and creep feed grinding.Tech Coola has also extended toollife during tough worm rolling androll-tapping operations performedon cold-formed steel.

According to Ron Felber, presidentand CEO, "Tech Cool" 35052 repre­sents a gigantic leap forward in thefield of chlorine activated semi-syn­thetic metal working fluids. Becauseit provides enhanced bio-resistance,excellent lubricity, and corrosionresistance, Tech Cool" 35052 is spe­cially suited for even the most chal­lenging metalworking operations."

For more information, call (800)526-4473 or visit www.chemetal­lamericas.com

www.metalfinishing.com/advertisers

STEAM WASHERSDaimer® lndustries's, a global sup­plier and exporter of stearn pressurewashers, has expanded its line ofded­icated stationary stearn cleaning sys­tems. The new fuel-heated, electric­powered Super Max™ 15500SPcombines a high flow rate, low pres­sure levels and new Super High­Temperature OptimizedTechnology'?' (Super-HOrM). Thestearn-only system is engineered toremove grease from a variety surfacesand machinery within metalworkingand metal manufacturing plants.

"Our new stationary Super-HO'I?"

561 metalfinishing 1March 2010

pressure washers offer dedicated wet­stearn for removing oily deposits,"said Matthew Baratta, Daimer.comspokesman. "This technology alsoeliminates confusion for usersbecause it offers a single, high-tem­perature cleaning option."

Daimer's Super-HOTTM commer­cial pressure washer systems havebeen manufactured to produce onlywet stearn with temperaturesapproaching 330°F. The 15500SPpressure washers turn cold water tostearn in as little as 30 seconds. Theequipment can be heated with a vari­ety of fuels, including #1 or #2 heat­ing oils, diesel, kerosene, natural gas,or even propane.

The stationary 15500SP pressurewashers produce pressure levels upto 1000 psi and offer flow rates up to4 GPM. The machines are poweredby a 230V, single-phase, 60 Hz, 3 HPNEMA motor. The new power wash­ers can also be purchased with 50 Hz,single or three phase, or 440Vmotors. The machines include anelectronic direct-spark ignition sys­tem and direct-drive pumps.

For more information aboutDaimer® high pressure washermachines, cold and hot water pressurewasher systems, stearn pressure wash­ers or other pressure washing equip­ment, please be sure to visitwww.daimer.com/pressure-washers/ orcall Matthew Baratta at (888) 507-2220.

www.metalfinishing.com/advertisers

POWER SUPPLIESDynatronix' new 1200W modelsare equipped with two 10-turnpotentiometers for voltage currentor cross-over regulation and two dig­ital meters for voltage and currentread-back. A serial port is providedfor external control. An optionalinterface allows the use ofa variety of

controls. Dynatronix LT PowerSupplies can be operated in parallelor series mode. The company's LTSeries is ideal for reel-to-reel line orany other PLC driven process.Packaged in a lf2 rack design, the LT1200 watt models' internal electron­ics are environmentally sealed, thenpackaged in 316 stainless steel to fur­ther assure long service life.

Universal input allows these powersupplies to operate on input rangingfrom 85-264VAC, 47-63 Hz singlephase with outputs ranging from120W-1200W. An over-temperatureindicator warns of high heat sinktemperatures early, allowing for cor­rective action before interruptingproduction. The cooling fan featureson-demand variability, automaticallyadjusting its speed based on the tem­perature of the heat sink. Fan is easi­ly removed for cleaning and preven­tive maintenance.

Dynatronix manufactures a com­plete line of power supplies rangingfrom simple DC units represented bythe LT Series, enhanced DC, pulseand pulse reverse models representedby the MicroStar and Pro Series. Formore information, call (715) 268­8118 or visit www.dynatronix.corn.

www.metalfinishing.com/advertisers

DRUM TRANSPORTERLiftomatic Material Handling, Inc., aleader in material handling technol­ogy, unveils the new Ergomatic1000-PLEH-BC drum transporter. Ithas powerful electric/hydraulic lift­ing system that is activated by a sim­ple push-button; no foot pumps or

www.metalfinishing.com