Embed Size (px)
Citation preview
Power Supply Specification DC-DC
ACT SW0002002
© 2018, All Rights Reserved, Specifications subject to change without notice 2001 Fulling Mill Road ● Middletown PA 17057 ● 717 939-2300 ● F: 717 939-7170 ● www.actpower.com
SW2511001-12 April 2017
Features
Single Output up to 140 W (5 A max) 15 to 36 VDC Input Base Plate 85 °C max. Efficiency up to 97% Ripple 100 mVp-p (Vo ≤ 10 V)
1% of Vo (Vo >10 V) Regulation, line <1% typical Regulation, load* 1% (Vo ≥ 20 V) Non-Isolated
Actual appearance may vary to that shown above.
Brief Description
This DC-DC power supply is designed to meet rough environments as a point of load (POL) solution. It offers factory settable output features to accommodate line drop in a system. It is compact in size and weighs ~0.6 lbs.
Environment
Temperature: -40°C to +71°C operating -40°C to +85°C non-operating Vibration: MIL-STD-202, Random 6 GRMS Shock: MIL-STD-202, 30 g ½ sine EMI: Per MIL-STD-461
Outline Drawing:
Ordering Part Number
Base P/N Output Voltage (Vo)
Over Voltage (%)
Over Current (A)
SW0002002- AA.A- BBB- C.C
AA.A is Output Voltage (Vo) specified between 3.3 to 28 V BBB is the Over Voltage specified between 105% to 115% C.C is the Over Current specified between 1.0 to 5.2 A Ex: SW002002-12.5-105-2.5 has an Output Voltage of 12.5V with a 105% Over Voltage set point and a 2.5 A Over Current set point. Notes: 1) Vin must be at least 3 V higher than Vo. 2) *Load regulation
Vo < 5V 5% 5V ≥ Vo < 10V 3%
10V ≥ Vo < 20V 2% Vo ≥ 20 V 1%
Size: 4.40 x 2.10 x 1.175 in Connectors: Input: 1803280 (mate: 1803581, 1850673) Output: 1757242 (mate: 1757019, 1777280) (Phoenix Contact connectors, mates not included)
For additional details, please contact ACT at (717) 939-2300 or [email protected]
