PowerPoint 프레젠테이션hsengks.com/download/company.pdf · 2013. 7. 29. · 2009.12.16 : WIKA BETON(Surabaya, Indonesia) , Contract of Machines for PC-PILE 2010.02.09 : WIKA

2013 YEAR www.hsengks.com

http://www.hsengks.com/

HS Eng Co., Ltd. HS Bldg., 164-25, Dodang-dong, Wonmi-gu, Bucheon-si, Gyeonggi-do, Korea

Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

“Leader for advanced tech. & Priority of the best quality”

I am honored to have a chance to introduce my company. Since 1989, we have been

manufacturing the equipments for Concrete product. We have acquired many and various

experience from a lot of project in Southern-East Asia and Africa as well as Korea. With the

know-how from these projects, we make constant effort to design the improved and created

Machine following fast developed-technology.

My company has been grown up with seeking concentrated foreign market against a serious

crisis in domestic market. Besides, we provide the prompt and very careful A/S & advice by the

Best Engineering. According to this, thankfully our customers show their trust and ask us to join with

2nd and 3rd project.

We HS ENG will do our best with all might in order to the Global Leader on field of Concrete Pile

& Pole. Also we surely promise to be the best partner with you and supply the certain quality &

Engineering support . Wish good luck and eternal prosperity on your business and family.

CEO Compliment

HS ENG Co., LTD

KI-SUN SUNG, DIRECTOR

1. HS Eng Co., LTD Profile

2. Organizational Chart

3. PILE Production flow chart

4. World Best Brand “HS ENG”

Contents


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Introduction ‘HS Eng’

Business Field

Achievement

HS Eng Co.,Ltd. Profile


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Name of Firm : HS ENG Co., LTD

• Registration No. : 210-81-55343

• Organization Date : 2005. 04. 12.

• Representative : Ki Sun, Sung

• Firm Policy in 2009 : Priority of Quality

• Field of Business : PC-BAR, JOINT CAP, Production & Solution

for Machine of PC/PHC PILE

• Office & Factory : HS Bldg., 164-25, Dodang-dong,

Wonmi-gu, Bucheon-si, Gyeonggi-do, Korea

• E-Mail : [email protected] , Home : www.hsengks.com

Introduction ‘HS ENG’


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Business Field


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Equipment for PC

& PHC Pile, Pole,

Pipe Product

• Consulting and Design

General consulting for Factory and Concrete product

Total Engineering with a lot of Know-how and experience from home and abroad

Individual design based on high productivity and earning rate

• Manufacturer of Machine

Prompt and reliable machine based on the BEST QUALITY

Design more improved machine every time, and apply to

new one.

• Installation, Commissioning and A/S

Priority of the promise with customer : Delivery and support

Responsible installation and test for satisfication of customer.

Thorough technical instruction, commissioning and offer Total Solution

Achievement

2005.04.12 : Change firm name to ‘Hwasan Hydraulic Co., LTD’.

2005.11.17 : NANTONG JIAOTONG STEEL ROPE COMPANY, Monopoly contract.

2007.02. 01 : Bando Cranes Co., LTD, Agency contract.

2007.02.06 : Halla Vina Concrete(Vietnam), Turnkey contract.

2007.12.20 : Change firm name to ‘HS ENG Co., LTD’.

2008.06.04 : Tatchi Trading SDN BHD(Malaysia), Contract of Machines for PC-PILE.

2008.07.18 : TONGYANG MAJOR(Iksan, Korea), Contract of Machines for PHC-PILE.

2008.09.01 : ICIRD(Vietnam), Contract of Machines for PC-PILE.

2008.11.03 : WIKA BETON(Indonesia) , 1st Contract of Machines for PC-PILE.

2009.04.13 : WIKA BETON(Indonesia) , 2nd Contract of Machines for PC-PILE.


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

2009.06.11 : Tatchi Trading SDN BHD(Malaysia), Contract of Machines for Large PILE

2009.06.13 : Hong Duc(Vietnam), Contract of Machines & Engineering for PC-PILE

2009.10.24 : Geumsan Co., LTD(Korea) Contract of Machines for PHC-PILE.

2009.12.16 : WIKA BETON(Surabaya, Indonesia) , Contract of Machines for PC-PILE

2010.02.09 : WIKA BETON(Medan, Indonesia) , Contract of Machines for PC-PILE

2010.04.22 : SABA ENGINEERING(Ethiopia) , Contract of Machine for POLE

2010.05.20 : SAMBU CONCRETE(Korea), Contract of Machines for PHC-PILE

2010.05.27 : TIANJIN ZHONGZJI(China), Contract of Machines & Engineering for

SQURE-PILE

2010.06.03 : WIKA BETON(Boyolary, Indonesia), Contract of Machines for PC-PILE

Achievement


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

2010.07.02 : SOUTHERN ENG(Vietnam), Contract of Machines for PC-PILE

2010.08.01 : TONGYANG MAJOR(Asan, Korea), Contract of Machines for PHC-PILE

2010.08.09 : MINH DUC(Vietnam), Contract of Machines for LARGE PC-PILE

2010.10.13 : WIKA BETON(Bogor, Indonesia), Contract of Machines for PC-PILE

2010.11.18 : DAELIM CNS(Haman, Korea), Contract of Machines for PHC-PILE

2011.02.01 : TONGYANG MAJOR(Asan, Korea), Contract of KS Laege Repair

Construction

2011.03.29 : GUODING CONCRETE(China), Contract of Machines for LARGE PC-PILE

2011.04.29 : WIKA BETON(Bogor, Indonesia) , Contract of Machines for PC-PILE

2011.07.22 : TIANJIN ZHONGZJI(China), Contract of Machines for PHC-PILE

Achievement


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

2011.08.11 : JINZHOU NEW CHINA DRAGON INDUSTRIAL GROUP CO.LTD(China),

Contract of Machines for PHC-PILE

2012.02.02 : WIKA BETON(Indonesia) , 6 Factory Contract of Machines for PC-PILE

2012.02.19 : DAELIM CNS(Yongin, Korea), Contract of Vacuum lifter Repair

Construction

2012.03.12 : TATCHI TRADING SDN BHD(Malaysia), Contract of Machines for Larg

PILE

2012.03.28 : MYUNGJU Co.,LTD(Korea), Contract of fabricating part Repair

Construction

2012.12.19 : SAMBU Construction Industry Co.,LTD(Korea), Contract of fabricating

part Repair Construction

Achievement


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Organizational Chart

Chief Director

Trading Managing Plant Technical Oversea Business

Consulting Board of Directors


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Production flow chart


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

GRAVEL

CEMENT

SAND

GRAVEL

WATER

ADDMIXER

MIXING CON’S POURING

SLUMP TEST

MOULDING TENSIONNING SPINNING

STEAM CURING

PRESTRESSING

DEMOULDING

MARKING

STOCK YARD

TENSION DEVICE

FABRICATION FORM OIL SPRAY MOULD CLEANNING

• PILE • HEAD CAP • JOINT CAP • SHOE

CONCRETE COMPRESSIVE

STRENGTH for 6-8 HR

AUTO CAGING

INSPECTION

INSPECTION HEADING

CUTTING P.C BAR

SPIRAL WIRE

SPIRAL WIRE

CONCRETE COMPRESSIVE

STRENGTH TEST for 28 DAY

PILE : BENDING TEST

Main Equipment

Marketing Area

Supply Achievements(Domestic & Overseas)

PROJECT in 2011

Management System

World Best Brand “HS ENG”


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

1. Main Equipment


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

1. Equipment

1) Processing Part

2) Assembling Part

3) Forming Part

4) Dismantling Part

2. Crane Equip.

3. Mould&Tension Device

• Use : Cut automatically PC-BAR with the designated length

according to the planed product.

•SPECIFICATION

1) Applicable PC-BAR : Ф5~13mm

2) Feeding Speed : Max. 40M/min

3) Tolerance : ±1mm

4) Cutting Force : 30Ton/F

5) Pneumatic Source : 6kg/cm²

6) Feeding Control by Inverter

7) Cutting Clutch : Air Clutch (DBS420)

8) Control : P.L.C (LS)

1. Automatic Cutting Machine

1) Equipment(Processing Part)


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Automatically transfer the cut PC-Bar

from Cutting machine and make

Heading work complete without the

operator’s help.

•Specification

1) Transfer Roller : Chain driving

2) Movement of PC-Bar : Air Cylinder

3) Cycle time : Within 20sec.

2. Auto loader



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Make the cut PC-BAR to heading shape

with the high heat and pressure for the

Caging and Tensioning step.

• Specification

1) Method : Combined Hydro. & Pneumatic

with Trigger Circuit

2) Composition : Body, Cylinder,Booster(pressure

intensifier), Pneumatic Regulator,

Hydro-Convertor, Transformer

3) Heating Time : 12~18 sec.

4) Heating Temperature : 500~580ºC

5) Transformer : 15KVA

6) Control : P.L.C (LS)

3. Heading Machine


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791


• Use : Weld the PC-BAR with Spiral wire for

making the Pile Cage according to the

planed product.

•Specification

1) Speed of Main Drum : Max. 60rpm

(Working 40rpm)

2) Spiral Wire : Φ3~5mm

3) Transformer : 85 or 130KVA

4) Welding Method : Spot Welding

5) Coolant : Water Circulation

6) Pitch Change : Pulse pick-up

7) Control : Inverter(3EA) + P.L.C

4. Pile Caging Machine



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

5. Pole Caging Machine


making the Pole Cage according to the

planed product.

•Specification


(Working 40rpm)





6) Pitch Change : Pulse pick-up

7) Control : Inverter(3EA) + P.L.C



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

6. Hume Pipe Caging Machine


making the Hume Pipe Cage according

to the planed product.

•Specification


(Working 25rpm)





6) Control : Electrode Clutch + P.L.C



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

•Use : Lift a roll of PC-BAR and transfer onto

PC-BAR STAND.

•SPECIFICATION

1) Support on 3 points

7. PC-BAR LIFTER

•Use : Supply PC-BAR to Cutting Machine

•SPECIFICATION

1) Dia of inner : Φ2,680mm

2) Natural driving without power

8. PC-BAR STAND



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Pour concrete into Mould while the Cart

is driving.

•Specification

1) Type : Screw type, Two way Chute discharge

2) Power : Screw - 30kw X 20:1 Geared Motor

Agitator - 7.5kw X 1/289 Cyclo Reducer

3) Screw Material : Scr mnh3

4) Load Cell : 5Ton X 3points

5) Hydro. Cylinder : Ø80 X 800st

6) Speed Control of Screw : Inverter

7) Vibrator : 2 of Hopper and Both sides of Chute

8) Pouring Cart : 22kw X1/30 Geared Motor

Endless Winch type

Control by Inverter

1. Pouring Machine & Cart

2) Equipment(Assembly Part)


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Assemble both upper and lower

mould, and transfer.

•Specification

1) Chain : RF12250S Double.

High-Strength type

2) Bracket Distance : 2M

3) Roller : Heat treatment, Inserted Bearing

4) Speed control : Inverter

5) Power : 11kw X 1:30 Geared Motor

with AC Brake

2. 1Line Ass’y Conveyor



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Transfer Cage from 2nd floor to 1st

floor into mould.

• Specification

1) Power : 2.2kw X 1/30 Geared Motor

2) Chain : RS2080

3. Cage Lifter


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791


• Use : Pull a shaft of Mould with the setting

value of tension force in advance, and make

enough tension the PC-BAR of Cage

•Specification (Ex. 200Ton)

1) Working Pressure : 250kg/cm2

2) Cylinder Area : 800cm2

3) Cylinder Stroke : 270mm

4) Tension Method : Center Hole Jack

5) Hydro. Pump : 7.5HPX4P

6) Measurement : Digital Indicator

with Printer

7) Coupler : Male + Female 1set

1. Tension Jack

3) Equipment(Forming Part)


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Spin the Mould including concrete by 4~6step

(Low speed->high), and make concrete distribute

equally with centrifugal force.

•Specification (Ex. For Φ300~800)

1) Power : D.C Motor 125kw (Fixed Power-out type)

2) Wheel : H type - Φ560 X140t + I type - Φ520 X100t

3) Wheel M’tl : Scmn3 - Surface hardening

4) Wheel Pitch : 2M

5) Shaft : Two-Line driving, Connect with Coupler

6) Bearing : Self-aligning & Thrust

7) Bed : Cast Iron

2. Spinning Machine (Single+Double)



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

1. Chamber Cover

1) Steel Structure

2) Attach 4 hanger for T type Slinger

2. Steam Controller

1) Controller : Shinko(Japan)

2) Sensor : PT 100Ω X 6P X 450L

3. Steam Piping

1) Piping : From Frange of Boiler to pipe

inside Curing Chamber

2) Sol. Vlalve : CKD. Flange type.

3. Steam Curing Chamber

Chamber Cover

Steam Controller

Steam Piping



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Dismantle the formed mould to

upper and lower mould, and transfer.

•Specification

1) Chain : RF12200S Double.

High-Strength type

2) Bracket Distance : 2M

3) Roller : Heat treatment, Inserted Bearing

4) Speed control : Inverter

5) Power : 11kw X 1:30 Geared Motor

with AC Brake

1. 1Line Dismantling Conveyor

4) Equipment(Dismantling Part)


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Turn over the Upper Mould in order to spray the oil inside the mould,

and put on 4Line Conveyor.

•Specification

1) Arm : Single arm – 180°, 1 time turning

2) Arm Head : 180°, turning

3) Set up Clamping Jog

3) Hydro. Cylinder : 3EA for Arm

5EA for Head and Jog

4) Hydro. Pump : 30kw+15kw

2. Turnning Machine



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Transfer the dismantled mould

to Pouring Machine, also assemble

the Cage with Tension device.

•Specification

1) Chain : RF10150 Double or RF12250 Single

- High-Strength type

2) Bracket : V + Flat type – Pitch 2M

3) Speed : 6M/min

4) Distance : 4+4+4M

5) Power : 11kw X 1/225 Gear Box

3. 4Line Chain Conveyor



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Untie Tension Nut of the Mould

which steam curing is completed.

• Specification

1) Hydro. Unit : Pressure-250kg/cm2

2) Jib Crane + Spring Balace (150kg)

4. Nut Runner



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Transfer the dismantled product.

• Specification

1) V-type Roller

2) Loading : Hydro. Cylinder

5. Roller Conveyor



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Stock the mould which Steam curing is completed.

•Specification

1) H 200X200 Structure

7. Mould Stand

• Use : Stock the product before moving to Stock Yard, and mark

label.

•Specification

1) H 200X200 Structure 2) Slope : 1/100

6. Product Stand



Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

2. Crane Equip.


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

1) Vacuum Lifter

2) TX & F Type Slinger

3) C Type Slinger

4) Overhead Crane

• Use : Dismantle the completed concrete

product from Mould with Vacuum

pressure of Rubber Pad.

•Specification (Ex.Φ300~600 X 18M)

1) Pump Motor : 3.7kwX6P

2) Pump suction capacity: 2200L/min-2SET

Capacity of Pump Suction : 2200L/min-2Set

3) Vacuum Pressure : Max.650mmhq

Working - 550~600mmhq

4) Absorption & Desorption :

Suction time – 3sec. Discharge – 2sec.

5) Pad : 14EA (0.9Ton/EA)

M’tl – Rubber(neoplane)

1) Vacuum Lifter


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Attached with Overhead Crane, and

lift Mould tire(with TX type) or Lower

mould(with TX+F type) and transfer.

• Specification

1) Slinger Jog : Scm440. High frequency.

Distance - 4+4+4+4M.

Use the air Cylinder

2) Attach Air Compressor : 3.7kw

2) TX & F Slinger TX type Slinger

TX+F type Slinger


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

3) C Type Slinger


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Attached with Overhead Crane, and

lift the completed cage from Caging

machine and transfer.

• Specification

1) Slinger Jog : Distance - 4+4+4+4M.

Use the air Cylinder

2) Attach Air Compressor : 2.2kw

• Use : Designed according to each part. Attach

Slinger or Vacuum lifter and transfer

Mould and product.

• Specification

1) Steel structure

Single, Double or Triple Girder

Saddle Frame and Walkway

2) Motor : Travelling, Traversing and Hoisting.

3) Use Trolley Bar for Electric cable.

4) Electric Equipment : Unified Panel + Inverter

5) Operation : Cabin or Remote control.

4) Overhead Crane


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

3. Mould & Tension Device


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

1) Mould

2) Tension Device

• Use : Mould for Pile or Pole Product

• Specification

1) Possible to manufacture according to each

product size.

2) One touch Bolt : Brand new. Spring type.

Easy to unfasten the bold.

1) Mould

Pile Mould

Pole Mould


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Use : Necessary to tension after assembling

with Cage inside Mould.

2) Tension Device


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Korea

ETHIOPIA MALAYSIA

U.S.A

VIETNAM

CHINA

INDONESIA

GUATEMALA


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

2. Marketing Area

IRAP

2. Marketing Area


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

• Korea

Aju Industrial

Geumsan

Dasan Concrete

Daelim CNS

Dongsu Industrial

Dongjin Industrial

Mirabo Concrete

Sambu Cocrete

Samsung Industrial

Sesin Pile

Tongyang Major

Yongam Industrial

Myungju Co.,LTD

Dongjin Industrial Co.,LTD

• China

Samhwa Concrete

Tianjin Zhongji Pile Industry

Guoding Concrete Pile Co., LTD

Zhaofeng Concrete Co., LTD

• Vietnam

Bien Hoa Concrete

Be Tong Ha Thanh

Cong Ty Min Duc

Cong Ty Son Truong

Halla Vina Concrete

Panvu Construction

Son Tay., JSC

Southern Engineering

• Malaysia

Anchor Sol

Binaan Dejaya Sdn Bhd

Cepco Concrete

Daido Concrete

Eng Beng

Flanky Construction

Perlis Concrete

Tatchi Trading Sdn Bhd

• Indonesia

PT. Wijaya Karya

PT. Citra Lautan Teduh

• Ethiopia

Saba Engineering PLC

KEC International

• U.S.A

Ameron International

• Guatemala

Sifa

PROJECT in 2011


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

BUYER DESCRIPTION ESTIMATED AMOUNT

REMARK

SON TRUONG Ø800~Ø1200 PILE PLANT PROJECT $1,400,000 HAIPHONG,

VIETNAM

WIKA BETON Ø300~Ø600 PILE PLANT PROJECT $1.100,000 INDONESIA

DAELIM CNS Ø500~Ø1000 PILE PLANT PROJECT $4,300,000 YONGIN,

KOREA

TONGYANG MAJOR Ø800~1000 PILE PLANT PROJECT $4,000,000 ASAN,

KOREA

SHANGHAI ZHONGJI SQUARE PILE PLANT PROJECT $2,000,000 CHINA

ZHUHAI ZHAOFENG Ø300~Ø600 PILE PLANT PROJECT $4,500,000 ZHUHAI, CHINA

YOUJEONG INDUSTRY POLE PLANT PROJECT $1,000,000 KOREA

HALLA VINA Ø300~Ø800 PILE PLANT PROJECT $500,000 HOCHIMINH,

VIETNAM

PROJECT in 2011


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

BUYER DESCRIPTION ESTIMATED AMOUNT

REMARK

TONG YANG MAJOR Ø300~Ø600 PILE PLANT PROJECT $230,000 KOREA

TIANJIN GANG HANG Ø300~Ø600 PILE PLANT PROJECT $540,000 TIANJIN, CHINA

GUODING CONCRETE Ø300~Ø600 PILE PLANT PROJECT $600,000 NAMTONG, CHINA

BINAAN DESJAYA POLE PLANT PROJECT $180,000 MALAYSIA

WIKA BETONG Ø300~Ø600 PILE PLANT PROJECT $200,000 INDONESIA

SOUTHERN ENG Ø800~Ø1000 PILE PLANT PROJECT $250,000 HOCHIMINH,

VIETNAM

DONGYANGMAJOR PILE PLANT PROJECT $400,000 KOREA

JINZHOUXINHUAYONGMU Ø300~Ø600 PILE PLANT PROJECT $320,000 SHEMYANG,CHINA


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

NO CUSTOMER LOCATION DESCRIPTION

1 JINZHOUXINHUAYONGMU

CHINA

Ø300~600X15M TWINS PLANT PROJECT

2 TIANJIN GANG HANG Ø300~600 TWINS PILE PLANT PROJECT 2ST

3 NINGBO CONCRETE PILE PLANT EQUIPMENT (OTHER THAN SLINGER)

4 GUANGZHOU SUNKUN Ø300~600X15M TWINS PLANT PROJECT

5 JIAN CHENG JI YE PILE PLANT EQUIPMENT

6 WIKA BETON INDONESIA

PILE PLANT EQUIPMENT

(OTHER THAN Ø800~1200X24M CAGE FORMING MACHINE)

POLE PLANT PROJECT

7 SON TRUONG

VIETNAM

HUE-MITO PILE PLANT PROJECT

8 SOUTHERN ENG EQUIPMENT SPUN CAGING MACHINE OTHER

9 AMACCAD SPUN PLANT PROJECT

10 BIAHDUONG SPUN PLANT PROJECT

PROJECT in 2012


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

NO CUSTOMER LOCATION DESCRIPTION

12 DAELIM C&S

KOREA

YONGIN PLANT VACUUM LIFTER REPAIR WORK

Ø300~600 THE LATEST PILE PLANT PROJECT

13 SAMBU RECONSTRUCTION FOR FABRICATING PROJECT

14 DONGJIN INDUSTRIAL CAGING Ø400~800X15M EQUIPMENT

15 TONGYANG MAJOR PILE Ø400~800 EXTENSION PLANT

16 BINAAN DESJAYA MALAYSIA CAGING PILE DOUBLE SPINNING MACHINE 1LINE

PROJECT in 2012

Enterprise Department

Resource Management

Non-loan Management

• Self-regulation and Responsibility • Independent profit on each department

• Enterprise Resource Planning • Efficient division of Human/Material resource

• No Risk • Maximize Earnings

Balance Competition

High-Efficiency

Management System


Tel: +82 32-682-3727/3609/3610 Fax: +82 32-682-2791

Documents

PowerPoint 프레젠테이션hsengks.com/download/company.pdf · 2013. 7. 29. · 2009.12.16 : WIKA BETON(Surabaya, Indonesia) , Contract of Machines for PC-PILE 2010.02.09 : WIKA