8/6/2019 Powerscan 8300 Quick Start Guide

http://slidepdf.com/reader/full/powerscan-8300-quick-start-guide 1/2

DatalogicScanning, Inc.959 Terry StreetEugene,Oregon 97402USATelephone:(541) 683-5700Fax:(541) 345-7140

An Unpublished Work - All rights reserved. No part ofthe contents of this documentation or the proceduresdescribed therein may be reproducedor transmitted in any form or by any means without prior writtenpermission of Datalogic Scanning,Inc. or its subsidiariesor affiliates ("Datalogic" or “Datalogic Scanning”). Ownersof Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit thisdocumentation for the purchaser'sown internal business purposes. Purchaser shall not remove or alter anyproprietary notices, including copyright notices, contained in thisdocumentation and shall ensure that all noticesappear on any reproductions of the documentation.Should future revisions of this manual be published, you can acquire printed versionsby contacting yourDatalogic representative. Electronic versions may either be downloadable from the Datalogic website(www.scanning.datalogic.com) orprovided on appropriate media. Ifyouvisit our website and would like to makecomments or suggestions about this or other Datalogic publications, please let us know via the "ContactDatalogic" page.

DISCLAIMERDatalogic has taken reasonablemeasures to provide informationin this manual that is complete and accurate,however,Datalogic reserves the right to change any specification at any time without prior notice. Datalogic andthe Datalogic logo are registered trademarks of Datalogic S.p.A. inmany countries, including the U.S.A. and theE.U. All other brand andproduct names may be trademarks of their respective owners.

SERVICE AND SUPPORT

Datalogic providesseveral services aswell astechnical supportthroughits website.Log on to

www.scanning.datalogic.comand click on the links indicated for further information including:

PRODUCTSSearch through the links to arrive at your product page where you can download specific Manuals andSoftware & Utilities including:

- Datalog ic Aladdin ™, a multi-platform utility program that allows deviceconfiguration using a PC. It

provides RS-232 interface configuration as well as configuration barcode printing.

SERVICE & SUPPORT- T ech n ic alS u pport - Product documentation and programming guides and Technical Support

Department in the world

- Service Programs - Warranty Extensionsand Maintenance Agreements

- RepairServices - FlatRate Repairsand Return Material Authorization (RMA)Repairs.

- Downloads–Manuals & Documentation, Data Sheets, ProductCatalogues, etc.

CONTACT USInformation Request Form andSales & ServiceNetwork 

WARRANTY

Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years from thedate of shipment, providedthat the product is operatedunder normal and proper conditions.

Datalogic has the faculty to repair or replace the product; these provisions do notprolong the originalwarrantyterm.The warranty does not apply to any product thathas been subjectto misuse,accidental damage, unauthorizedrepair or tampering.

PowerScan™ D8330

READERS

QUICK REFERENCE GUIDE

820001942 (Rev. F) July-2010

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are availableon Internet.

Log on to: www.scanning.datalogic.com

I

Su Internet sono disponibili le versioni aggiornate di driver e documentazionedi questo prodotto.

Collegarsi a: www.scanning.datalogic.com

D

Im Internet finden Sie die aktuellsten Versionen der Treiber undDokumentation für dieses Produkt.

Adresse : www.scanning.datalogic.com

F

Les versions mises à jour de drivers et documentation de ce produit sontdisponibles sur Internet. Cliquez sur : www.scanning.datalogic.com

E

En Internet están disponibles las versiones actualizadas de los drivers ydocumentación de este producto.

Dirección Internet : www.scanning.datalogic.com

CONNECTIONSCONNECTING THE CABLE

A. Rubber gasket

B. Plastic boot

C. Cable spacer

D. Cover

E. Strain relief 

1. Slip the cover over the cable.

2. Push the plastic boot into therubber gasket. Take care thatthe tab on the plastic boot isaligned with the notch in therubber gasket.

3. Push the plastic boot and gasketinto the handle. Ensure that the“Front” marking on the plasticboot is facing out, with thearrow pointing towards thefront of the scanner.

4. Insert the cable into the socketof the plastic boot.

5. Insert the cable spacer into thecable wire and slide it towardsthe handle.

6. Push the cover along the cabletowards the reader, and hook itover the yellow “tooth”.

7. Insert the strain relief into thecover and tighten the screw tofix the whole assembly to thereader handle. 

Align

Notch

Tab

Arrow

COMPLIANCE

LASER SAFETY COMPLIANCEThelaser scanner conforms tothe applicablerequirementsof bothCDRH 21CFR 1040 and EN60825-1 atthedate ofmanufacture.

The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beammomentarily causesno known biological damage,avoid staringat thebeam asone would with anyverystronglightsource,suchas thesun. Avoid thatthelaserbeamhitstheeyeofanobserver, eventhroughreflectivesurfacessuch asmirrors, etc.

The followinginformation is shown on the laser scanner device class label:

LED CLASS

Class1 LEDproduct.

This productconforms toEN60825-1:2001.

Thelaserlight isvisibleto thehuman eyeand isemittedfromtheoutput window (1).

Laserwarning andclassification label(2).

CAUTION:Use of controls or adjustmentsor performance of proceduresother than thosespecifiedherein may result in exposuretohazardous visible laserlight.

ITALIANO LUCE LASERNONFISSAREILRAGGIOAPPARECCHIO LASER DI CLASSE2

FRANÇAIS RAYON LASEREVITER DE REGARDER LERA YONAPPAREILLASER DE CLASSE2

DEUTSCH LASERSTRAHLUNGNICHT IN DENSTRAHLBLICKENPRODUKT DER LASERKLASSE2

ESPAÑOL RAYOLÁSERNO MIRAR FIJO ELRAYOAPARATO LÁSERDE CLASE2

CE COMPLIANCEWarning:

Thisis a ClassA product. In adomesticenvironmentthisproductmaycauseradiointerferencein whichcasetheusermayberequiredtotakeadequatemeasures.

FCC COMPLIANCE

Modificationsor changesto thisequipmentwithoutthe expressedwrittenapproval ofDatalogic could

voidtheauthoritytousetheequipment.

Thisdevicecomplieswith PART15 oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This devicemay notcause harmful interference,and (2)this devicemustacceptany interferencereceived,including interferencewhichmay causeundesiredoperation.

Thisequipmenthasbeen tested andfoundtocomplywith thelimitsforaClassA digitaldevice,pursuanttopart15 of theFCCRules.Theselimitsaredesigned toprovidereasonableprotectionagainstharmfulinterferencewhen theequipment is operated ina commercialenvironment. This equipmentgenerates,uses,and can radiate radiofrequencyenergyand, if notinstalledand used in accordancewith theinstruction manual, may cause harmful interference to radio communications. Operation of thisequipmentin a residential areais likelyto causeharmful interferencein which casethe userwill berequiredto correctthe interferenceathis ownexpense.

POWER SUPPLY

Thisdeviceis intendedto be connectedto a UL Listed/CSACertified computerwhichsuppliespower

directlyto thereader orelse besupplied by a UL Listed/CSACertified Power Unit marked “Class2” orLPSpowersourcerated4- 30V,minimum420mA,which suppliespowerdirectlyto thereadervia thepowerconnectorof thecable.

WEEE COMPLIANCE

PATENTS

Design Pat. AU 310201; AU 310202; CN693980; CN735959;HK 0602013.5M001; HK 0602013.5M002; JP

1305693; KR 30-0460940; USD570,843 S;USD588,596 S.

US Pat. 5,992,740; 6,305,606B 1; 6,412,698B2; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246B2;

5,103,080; 5,262,627; 5,367,151; 5,449,893; 5,545,889; 5,917,173; 5,923,025; 5,945,659; 6,098,877;

6,220,514 B1; 6,412,698B2; 6,607,132B1; 6,817,529B2; 6,834,805B2.

European Pat. 789,315B1; 895,175B1; 1,128,314B1; 1,128,315 B1;1,396,811B1; 1,413,971B1; 1,816,585

B1;1,942,442B1.

Additionalpatents pending.

Forinformationabout thedisposal ofWaste Electrical andElectronic Equipment(WEEE),pleaserefertothewebsiteat www.scanning.datalogic.com.

USB.

WEDGE

RS-232

PEN

dichiarachedeclaresthat thedéclare quelebescheinigt, daß dasGerätdeclare queel

POWERSCAN Dxxx

sono conformialle Direttivedel ConsiglioEuropeo sottoelencate:areinconformitywiththe requirementsoftheEuropeanCouncilDirectiveslistedbelow:sontconformes aux spécificationsdes Directives del'Union Européenne ci-dessous:den nachstehendenangeführtenDirektivendes EuropäischenRats:cumple con los requisitosdelas Directivasdel Consejo Europeo,según la lista siguiente:

Basatesulle legislazioni degliStati membri in relazionealla compatibilità elettromagnetica ed allasicurezza deiprodotti.On the approximation of the laws of MemberStatesrelatingto electromagnetic compatibilityandproductsafety.Basée sur la législation des Etatsmembres relative à la compatibilitéélectromagnétiqueet àl asécuritédes produits.Über dieAnnäherungder Gesetzeder Mitgliedsstaatenin bezugaufelektromagnetischeVerträglichkeitund Produktsicherheitentsprechen.Basado e n la aproximación de las le ye s de los Paíse s M ie mbr os r e spe cto a la compatibilidadelectromagnéticay lasMedidas deseguridad relativasal producto.

Questa dichiarazioneè basatasulla conformità dei prodottialle normeseguenti:Thisdeclarationisbasedupon complianceoftheproductstothe followingstandards:Cettedéclaration reposesur laconformité desproduits aux normessuivantes:DieseErklärung basiertdarauf, daßdas Produktden folgendenNormen entspricht:Estadeclaraciónse basaenelcumplimientodelosproductosconlassiguientesnormas:

Datalogic Scanning, Inc.

07

959Terry StreetEugene,OR 97402

USA

e tutti i suoi modelliand all its models et tous ses modèles und seine Modelle y todos sus modelos 

89 /336/ EE C EM C D ir ect ive e 92/ 31/ EE C, 93 / 68 /E EC emendament i successi v iand further amendments  et ses successifs amendements  und späteren Abänderungen  y succesivas enmiendas  

EN55022 (CLASS AITE), August 1994:AMENDMENTA1(CLASS A ITE),October 2000:

LIM IT S AN D M E TH O DS  OF  MEASUREMENTS OF  RADIO

DIST U RB ANC E C H AR ACT E RIS TIC S O F  INFORMATION

TECHNOLOGY EQUIPMENT

EN61000-6-2, October 2001: ELECTROMAGNETICCOMPATIBILITY (EMC).PART 6 -2 : GENERIC STANDARDS - IM M UN ITY F O R

INDUSTRIAL ENVIRONMENTS.March1st, 2007

8/6/2019 Powerscan 8300 Quick Start Guide

http://slidepdf.com/reader/full/powerscan-8300-quick-start-guide 2/2

DEFAULT VALUES

USB-KBD DEFAULT SETTINGS

USA keyboard, FIFO enabled, inter-character and inter-code delays disabled, USB

keyboard speed normal.

DATA  FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = E NTER, character replacement disabled.

RS-232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx timeout

5 sec., ack/nack disabled, FIFO enabled, inter-character delay disabled, serial trigger

lock disabled.

DATA  FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = CR-LF, character replacement disabled.

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock 

unchanged, inter-character and inter-code delays disabled, control character

emulation = ctrl+shift+key.DATA  FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = ENTER, character replacement disable.

PEN DEFAULT SETTINGS

interpret operating mode, conversion to code 39 disabled, output level normal, idle

level normal, minimum output pulse 600 μs, overflow medium, inter-block delay

disabled.

CODE SELECTION

Enabled codes

EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

Interleaved 2/5

check digit control and transmission, variable length code; 4-99 characters

Standard Code 39

no check digit control, variable length code; 1-99 characters

Code 128

variable length code; 1-99 characters

Disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Code11,

Code16K, Code49, GS1 DataBar™Codes

TECHNICAL FEATURESPowerScan™ D8330/ D8330 AR

El ectri cal Features PowerScan™ D8330PowerScan™ D8330

AR

Power Supply 4 to 30 VDC

Max. Consumption: 0.076 mm (3 mils) 0.25 mm (10 mils)

@ 4V

@5V

@30V

Sleep mode

420 mA

310 mA

62 mA

4 mA

500 mA

370 mA

70 mA

4 mA

Scan Rat 35 ± 5 scans/sec

Reading IndicatorsGood Read LED (green)

Good Read Spot (green), Beeper

Optical Features

Reading Field

(Typical performance at 20ºC / 68ºF

on high quality barcodes)

110cm(43.3in)

@55mils

1090cm(429.13in)

@100mils reflective

Max. Resolution 0.076 mm (3 mils) 0.178(7,5mils)

PCS (Datalogic Test Chart) 15% 25%

Laser Features

Power (max) 0.9 mW 1.3 mW

Scan Angle 42° 13.5° ± 0.7

Laser Safety Class Class 2 EN 60825-1/CDRH

Environmental Features

Worki ng Temperature -30 °C to + 50 °C / -22° to +122 °F

Storage Temp erature -30 °C to + 70 °C / - 22° to +158 °F

Humidity 90% non condensing

Drop Resistance IEC 68-2-32 Test ED 2 m

Protection Class IP65

Mechanical Features

Weight (without cable) about 295 g (10.4 oz)

Cable Length 2 m (6 ft 6 in)

RESTORE DEFAULT

RESTORE DEFAULT

Ì$+$*oÎTo change the defaults refer to the PowerScan™ D8330/M8330 Reference Manual, or tothe Datalogic Aladdin™ Configuration program, both downloadable from the website.

INTERFACE SELECTIONSelect one of the interface codes according to your application.

USB INTERFACE SELECTION

* When configuring USB-COM, the relevant files and drivers must be installed from theUSB Device Installation software, which can be downloaded from the web site http://www.scanning.datalogic.com.

PEN EMULATION INTERFACE SELECTION

RS-232 INTERFACE SELECTION

WEDGE INTERFACE SELECTION

Interface for IBM XT and I BM Terminals 3151, 347X and 348X can be selected from thePowerScan D8330/M8300 Reference Manual available online at http://www.scanning.dat-alogic.com.

USB-KBD

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Hand Held

Ì$+UA01$-.ÎUSB-IBM Table top

Ì$+UA00$-(ÎUSB KBD-APPLE

Ì$+UA05$-FÎ

PEN

Ì$+CP6$-BÎ

RS-232 Standard

Ì$+CP0$-$Î

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

Wedge IBM AT or PS/2 PCs

Ì$+CP500$-aÎ

PC Notebook 

Ì$+CP505$-ÈÎ

PC Notebook - ALT mode

Ì$+CP508$-2Î

IBM AT - ALT mode

Ì$+CP507$-+Î

KEYBOARD NATIONALITY

USB-KBD and Wedge users should select one of the following wedge keyboard nationalitycodes according to the keyboard.

The following Keyboard Nationality selections are only valid for IBM AT compatible PCs:

Belge

Ì$+FJ7$-8Î

Deutsch

Ì$+FJ3$-$Î

English

Ì$+FJ4$-)Î

Español

Ì$+FJ6$-3Î

Français

Ì$+FJ2$-ÊÎ

Italiano

Ì$+FJ1$-ÅÎ

Svenskt

Ì$+FJ5$-.Î

USA (Default)

Ì$+FJ0$-|Î

Japanese

Ì$+FJ8$-=Î

Russian (Latin)

Ì$+FJ9$-BÎ

Russian (Cyrillic)

Ì$+FJA$-jÎ

Hungarian

Ì$+FJB$-oÎ

Slovenian, Croatian, Serbian (Latin)

Ì$+FJC$-tÎ

Romanian

Ì$+FJD$-yÎ

Czech Republic

Ì$+FJE$-~Î

USING POWERSCAN™ D8330/D8330 AR READERS

PowerScan™ D8330 readers automatically scan barcodes at a distance. Simply aim andpull the trigger. Code scanning is performed along the scan line emitted from the readingwindow. This line must cross the entire code. The best reading angles are indicated in thefigure below.:

AIMING SYSTEM

PowerScan™ D8330 and PowerScan™ D8330 AR provide an aiming system. If enabled, apartial trigger press produces a red spot, which should be aimed over the code center toget the best reading performance, see figure (1) above. By completely pressing the triggerthe scan line appears to start code scanning (2) .

After setting up the reader

, you can enable or disable the aiming system by reading thecodes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Enable Aiming System

Ì$+Bj1$-'Î

DATA FORMAT TERMINATORS

For your convenience, some common Terminators are given below. For other Header/Terminator selections, Data Format and Advanced Data Format parameters, see thePowerScan™ D8330/M8330 Reference Manual.

OPERATING TEST

Read the TEST code below.

Code 128

CR-LF

Ì$+EA120D0A$-ÃÎ

Enter

Ì$+EA1183$-0Î

Tab

Ì$+EA1184$-8Î

None

Ì$+EA10$-dÎ

t e s t