Presentation

Thanks to Avancini’s machines, featured with a strong and reliable mechanics, the mixing time of a traditional mixer can be reduced

SP 5

Our mixers are suitable for bakeries, pizzerias and confictionaries because they can process perfectly any kind of dough.

SP 10

SP 20E Our

machines go from

a minimum

of 5 kg up to 130 kg of dough capacity.

We offer three mixers with tilting head:

SP 5TR, SP 20TR SP 25TR with a respectively mixing capacity of 5, 18 e 23 kg.

SP 5 TR

SP 20 TR

SP 25 TR

•Bowl in stainless steel

•Spiral in special high-resistence stainless steel

•Moving parts mounted on bearings

•Safety system that blocks the machine as soon as the protection grid is lifted

•Oven painted

Main features of Avancini’s mixers

SP 30 - SP 40

SP 50 – SP 60

Spiral Mixers from SP10 up to SP40 can be

assembled with mono-phase engine, three-phase

or three-phase two speeds, depending on

your requirement…

All Spiral Mixers with a superior dough capacity are furnished with three-phase two speeds engine,

in order to simplify the working of big quantity of

dough.

In these machines speed change (from the

first to the second) and final

stop are authomatic.

SP 80 – 100 – 130

Bigger Spiral Mixers

SP 80, 100 and 130 have a

working cycle that can be

programmed thanks to two

timers

Ingredients are mixed smoothly.

Then, when the dough is consistent, the power of the spiral is increased to reduce the mixing time without changing the temperature of the dough

Mixers between 80 and 130 kg are equipped with some

additional features compared to the smaller

ones…

- Protective grid in stainless steel

-Movement are driven by belts, that avoid noises and expensive mantainance operations

- Two mixing speeds

- Low tension control panel (24 Volt)

-Two timers to control the working cycles and to guarantee the repetition of the cycle

- Two fixed wheels on the rear and two rotating on the front to move the machine easly

- Two levelling glides

Features of SP 80 – 100 – 130

Another kind of mixer offered by Avancini is the double-arm Mixer

This system allows the oxigenation of the dough avoiding at the same time an excessive warming process. In this way it is possible to obtain an excellent dough…

The whole structure, as well as the bowl, the arms and the grid, are in stainless steel. The oil-bathed transmission unit is made of special cast iron. The machine is mounted on ball bearings and has two speeds.

Several models available: TUFF 40, 50, 60, 80 and 100. All are extremely resistent, silent and reliable.

TUFF

A particular model of

our range is FC 20,

a fork Mixer

(instead of the spiral

system) equipped with the

same structural

features of the other

mixers.

FC 20

Our planetary grills are entirely made of stainless steel suitable for foodstuffs and moving parts are mounted on self-greasing bronze bushings

They are equipped with a low tension electrical

circuit (24 Volts), with stainless steel removable

dripping pan, overturnable thoughened

glass on the front side and fixed thoughened

glass on the back

By request our grills can be equipped with trolley

with dripping-pan or trolley with tempered

glass; moreover, we offer different type of spit for

chickens, small foodstuffs, roasts, thin foodstuffs and

for roast sucking-pig.

In electrical grills, the roasting process is done by sheathed resistances mounted in the

upper part of the machine.

The machine is featured with a double security

valve and double piezoelectric ignition. The

back of the oven is made in refractory material that

improve the heat distribution.

In gas grills, the roasting system is fed by the required type of gas. The burner is made by two elements having the same power (it is possible to use just one of them)

Cream cookers are totally made of stainless steel

suitable for foodstuffs. They are provided

with a stainless steel radiant basin, a

mixing arm made of the same material.

They are featured with transmission with an

oil-bathed motoreducer,electrical

circuit with low voltage control panel and a microswitch, so

that the machine is blocked if the head

positioning is wrong.

LT 70

LT 35

The burner they are featured with has a valve and piezoelectric ignition

They are perfect to cook pastry cream, risotto, béchamelle

and pasta meat sauce.

LT 35

LT 70

Polenta mixers have the same features of the Cream cookers.

They are featured with transmission with an

oil-bathed motoreducer,electrical circuit with low voltage

control panel and a microswitch, so that

the machine is blocked if the head positioning

is wrong.

Avancini’s Polenta mixers are

available in three models.

M 15

M 32/40 Model with tilting head

M R.P.C. Coupled Model cooking polenta with cooking risotto, béchamelle…

Planetary mixers are very useful in confictionaries.

PL 7’s structure is in aluminium casting, while all other planetary mixers are made in stainless steel.

PL 10

PL 20

PL 7

They are equipped

with speed

variation that is

obtained thanks to the speed changer with hand-wheel.

PL 30 – PL 40

PL 20

SFA dough sheeters are created following modern criteria of rationality and functionality;

they can process any kind of dough to the thinnest required thickness

Lamination cylinders are chromated with

hard chrome, rectified and

polished. Scrapers are easy to remove and conveyors can be raised up when

the machine is not in use in order to spare

room.

SFA 500 SM

SFA B 500/800 SFA B 500/1000

SFA 500/800 SFA 500/1000

All sheeters can have monophase or three-phase engine (also with two speeds) according to the customer’s needs. Sheeters models vary

according to the size of the belts: SFA B500/800, SFA B500/1000, SFA 500/800, SFA 500/1000, SFA 500EX800, SFA 500EX1000, SFA 600/1000, SFA 600/1300 and SFA 600/1500

“B” stands for bench top units,

whereas “EX” for sheeters

with removable conveyors.

We offer a wide range of pasta machines of different kind featured

with mixer and extruder…

Our machines go from 1,3 kg

of dough capacity

(with a production of

2,5 kg per hour) up to

big machines with a dough capacity of 50 kg (and a production per hour of

80 kg)

TR 50

TR 50 can be delivered in

different colours and paintings:

plain or marmorized.

Pasta machines we offer are equipped with...

TR 70

TR 75C - Moving parts mounted on bearings with long-life gaskets

- Parts in contact with the dough in stainless steel or bronze suitable for foodstuffs

- flame-retardant cable for power supply

- Engine driven, belt transmission with reducer that needs no maintenance, and chain for the mixer

TR 75 E inox

- Clockwise and anticlockwise movements for the moving parts- You can have

different kind of pasta by changing the dies (bronze or teflon dies).

TR 95 RA

You will also receive the pasta tray, the key for

the ring and a graduated measuring jug.

TR 110 TR 110S

TRD 110

TRD 110S

TR 150 continuous complete system with conveyor belt and mixer MS 80

Ravioli machines, available in two

models. They produce

double sheet ravioli and you can have

different shapes by changing the

mould…

RV 50

RV 30

They can process sheets produced with presses or

rolls and the thickness can be adjusted by the

user…

Ravioli can be filled with any

kind of filling and the quantity can be adjusted…

RV 50

RV30 produces ravioli in strip, while

RV50 produces detached ravioli.

Gnocchi machines are

perfect for pasta

production labs,

bakeries, delicatessen, supermarkets

and large communities

GN 90

GN 90 can produce up

to 90 kg per hour of plain and striped

gnocchi or chicche.

All our machines

comply

with the EC standars

Do not hesitate to contact us to have further

information, by phone +39 (0)445/637222

or by mail info@avancinispa.it we will be pleased to help

you!