PRESSURE BALANCE BATH/SHOWER FITTING VOLUME AND ...igate.northernplumbing.com/specsheets/americanstandard/r120ss.pdfR127SS Pressure Balance Rough Valve Body only with Screwdriver stops

B9© 2013 AS America Inc.

See reverse for available trim kits.

MODEL NUMBER:

R120 Pressure Balance Rough Valve Body onlyDirect sweat inlets/outlets. LESS trim.

R120SS Pressure Balance Rough Valve Body only with Screwdriver stops Direct sweat inlets/outlets. Screwdriver stops. LESS trim.

R125 Pressure Balance Rough Valve Body onlyFemale thread inlets/outlets. LESS trim.

R125SS Pressure Balance Rough Valve Body only with Screwdriver stops Female thread inlets/outlets. Screwdriver stops. LESS trim.

R127 Pressure Balance Rough Valve Body onlyPEX inlets/Direct sweat outlets. LESS trim.

R127SS Pressure Balance Rough Valve Body only with Screwdriver stops PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.

GENERAL DESCRIPTION:Cast brass body, washerless 47mm ceramic disc valve cartridge with volume and temperature control, back-to-back capability, integrated check valves, and hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat, threaded, or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trim kits.

PRODUCT FEATURES:Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water.Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy control over both water temperature and volume.Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system with integrated check valves engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water.Back-to-Back Capability: Hot and cold can be reversed quickly and easily.Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. Two piece design allows valve to be tested prior to trim installation.Wide Rough-in Range: From 1-5/8" to 3-1/4".

SUGGESTED SPECIFICATION:Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12____, Trim Kit - American Standard Model # ____.____.

R120 Valve Body Shown

Available Trim Kits

FINISHEDWALL

TOP OF TUB RIM

BOTTOM OF TUB

(1-5/8" TO 3-1/4")41mm TO 83mm

1/2"NPT

1/2"COPPER102 mm

(4")

38mm(1-1/2" MIN.)

OPTION 457 mm(18")

OPTIONAL TO FINISHEDFLOOR USUALLYBETWEEN 1651mm (65")AND 1981mm (78")

THREADED (R125)

INLETS 86mm

(3-3/8")

INLETS1/2" NPT

86mm(3-3/8")

SHR1/2" NPT

TUB PORT1/2" NPT

INLETS103mm(4-1/16")

103 mm(4-1/16")

INLETS 1/2" NOM.COPPER SWEAT

SHR. 1/2" NOM.COPPER SWEAT

TUB 1/2" NOM.COPPER SWEAT

51.5mm(2-1/32")

51mm(2")

SHR. 1/2" NOM.COPPER SWEAT


SWEAT (STOPS) (R120SS)

SWEAT (R120)

103mm(4-1/16")

INLETS1/2" NPT

149mm(5-7/8")

VALVE BODY OPTIONS

Princeton®

Copeland™

Colony® Soft Reliant® 3

R120

Direct SweatInlets/Outlets

R125

FemaleThreadInlets/Outlets

R125SS

Female ThreadInlets/Outlets

w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct

Sweat Outletsw/ Screwdriver

Stops

VA

LV

ES

B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500

Seva™

Green Tea®

Portsmouth® Ceramix®Moments®

Town Square® Studio®

SHR.1/2" NOM.COPPER

SWEAT


PEX (R127)

52mm(2-1/32")

104mm(4-1/16")

1/2" PEX INLETS(ASTM F1807)

109mm(4-1/4")

PEX (STOPS) (R127SS)


52mm(2-1/32")

104mm(4-1/16")

1/2" PEX INLETS(ASTM F1807)

165mm(6-1/2")SHR.

1/2" NOM.COPPER

SWEAT

SHR.1/2" NOM.COPPER

SWEAT


THREADED (STOPS) (R125SS)

86mm(3-3/8")

INLETS 1/2" NPT

149mm(5-7/8")

T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

Quentin™

T555.528

T555.527

TUB

SHR

C

OFF

H

T440.508

T440.507

UPGRADABLEPRESSURE BALANCE BATH/SHOWER FITTING

VOLUME AND TEMPERATURE CONTROL VALVE

Revised 10/13


• Showerhead with 2.5gpm/9.5L.min. flow restrictor.

R120R120

Direct Direct SweatSweatInlets/Inlets/OutletsOutlets

R125R125

FemaleFemaleThreadThreadInlets/Inlets/OutletsOutlets

R125SSR125SS

Female ThreadFemale ThreadInlets/OutletsInlets/Outlets

w/ Screwdriverw/ ScrewdriverStopsStops

R120SSR120SS

Direct SweatDirect SweatInlets/OutletsInlets/Outlets

w/ Screwdriverw/ ScrewdriverStopsStops

R127R127

PEXPEXInlets/DirectInlets/Direct

SweatSweatOutletsOutlets

R127SSR127SS

PEXPEXInlets/DirectInlets/Direct

Sweat OutletsSweat Outletsw/ Screwdriverw/ Screwdriver

StopsStops

VA

LV

ES

VA

LV

ES

Valve + Trim: Trim Kit & Valve Body Packaged Separately To order: Specify valve body and trim kit desired Example: R120 - Direct Sweat Valve Body

T508.502 - Princeton Bath/Shower Trim Kit

CODES AND STANDARDSThese products meet or exceed thefollowing codes and standards:

ANSI A 117.1ASSE 1016ASME A112.18.1CSA B 125

Moments®

B/SB/S

ShowerShower

ValveValve

B/SB/S

ShowerShower

T675.502T675.502

T675.501T675.501

T675.500T675.500

T385.502T385.502

T385.501T385.501

T385.500T385.500

T385.522T385.522 T480.502T480.502

T480.501T480.501

T480.500T480.500

T508.502T508.502

T508.501T508.501

T508.500T508.500

Seva™Princeton®Reliant® 3Colony® Soft

TR

IM K

ITS

TR

IM K

ITS

Reliant® 3w/mod Plate

T480.508T480.508

T480.507T480.507

Seva™Princeton®

T385.508T385.508

T385.507T385.507

Reliant® 3

T675.508T675.508

T675.507T675.507

Colony® Soft

T000.502T000.502

T000.501T000.501

T000.500T000.500

T506.502T506.502

T506.501T506.501

T506.500T506.500

T420.508T420.508

T420.507T420.507

T420.500T420.500

T508.508T508.508

T508.507T508.507

T010.502T010.502

T010.501T010.501

T010.500T010.500

T440.502T440.502

T440.501T440.501

T440.500T440.500

B/SB/S

ShowerShower

ValveValve

B/SB/S

ShowerShower

ValveValve

Ceramix®

TR

IM K

ITS

TR

IM K

ITS

T415.508T415.508

T415.507T415.507

T415.500T415.500

Portsmouth®Portsmouth®

T005.502T005.502

T005.501T005.501

T005.500T005.500

Green Tea®

Copeland™

FLOW RATE*

GA

LL

ON

S P

ER

MIN

UT

E

I N L E T P R E S S U R E ( P S I ) *Flow rates shown are for mixed hot and cold.

0

2

4

6

8

Spout

10080604020

T005.508T005.508

T005.507T005.507

Copeland™

Moments®

T506.508T506.508

T506.507T506.507

H

C

T010.508T010.508

T010.507T010.507

Green Tea®

T555.522T555.522

T555.521T555.521

T555.520T555.520

Town Square® Quentin™

T590.508T590.508

T590.507T590.507

T590.500T590.500

Studio®

T555.528T555.528

T555.527T555.527

Town Square®

TUB

SHR

T440.508T440.508

T440.507T440.507

Quentin™

C

OFF

H

UPGRADABLEPRESSURE BALANCE BATH/SHOWER FITTING

VOLUME AND TEMPERATURE CONTROL VALVE

Revised 10/13


TRIM KITSFOR VOLUME & TEMPERATURE CONTROL VALVES

R120


R125


R125SS


w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct


Stops

VA

LV

ES

Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.

1-1/2" REF.(38mm)

Trim Kit Finishes Roughing-In Dimensions

.002

.295

Polished Chrome

Satin Nickel (PVD)

Model # / Description

T675.502 BATH/SHOWER Trim Kit

T675.501 SHOWER ONLY Trim Kit

T675.500 VALVE ONLY Trim Kit

• Metal Lever handle• "Easy Clean" Showerhead • Shower arm and flange• Metal slip-on Diverter tub spout

• Metal Lever handle• "Easy Clean" Showerhead • Shower arm and flange

• Metal Lever handle

2.5gpm/9.5L/min. maximumflow rate

COLONY® SOFT

18"(457mm)optional

7" REF.(178mm)

FINISHED WALL

BOTTOM OF TUB

74" FOR HEADCLEARANCE

(1880mm)

4" REF.(102mm)

5-1/8" REF.(130mm)

TOP OF TUB RIM

1/2" COPPER4" REF.(102 mm)

1-5/8" TO 3-1/4"(41mm - 83mm.)

6"(153mm)

6-3/4"(172mm)

1-1/2" REF.(38mm)

18"(457mm)optional

7" REF.(178mm)

FINISHED WALL

BOTTOM OF TUB


(1880mm)

4" REF.(102mm)

5-1/8" REF.(130mm)

TOP OF TUB RIM

4" REF.(102 mm)

1-5/8" TO 3-1/4"(41mm - 83mm.)

T385.522 BATH/SHOWER Trim KitRELIANT® 3FINISHED WALL

4"(102mm)

TOP OF TUB RIM

18"(457mm)optional

BOTTOM OF TUB


(1880mm)

1-5/8" TO 3-1/4"(41mm - 83mm)

5-1/2" REF(140mm)

1-1/2" REF.(38mm) 13"

(330mm)

• Large metal wall escutcheon• Metal lever Loop handle• "Easy Clean" Showerhead • Shower arm and flange• Metal slip-on diverter tub spout


.002

.295

Polished Chrome

Satin Nickel (PVD)

152mm(6" REF.)

108mm(4-1/4" REF.)

T385.502 BATH/SHOWER Trim KitRELIANT® 3FINISHED WALL

4"(102mm)

TOP OF TUB RIM

18"(457mm)optional

BOTTOM OF TUB


(1880mm)

1-5/8" TO 3-1/4"(41mm - 83mm)

5-1/2" REF(140mm)

7-1/2"(191mm)

1-1/2"REF.(38mm)

152mm(6" REF.)

3" (76mm)

7-1/2"(191mm)


T385.500 VALVE ONLY Trim Kit• Metal wall escutcheon• Metal lever Handle


• Metal wall escutcheon• Metal lever handle• "Easy Clean" Showerhead • Shower arm and flange

• Metal wall escutcheon• Metal lever handle• "Easy Clean" Showerhead • Shower arm and flange• Metal slip-on diverter tub spout

.002

.295

Polished Chrome

Satin Nickel (PVD)

108mm(4-1/4" REF.)

B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500

.002

.295

Polished Chrome

Satin Nickel (PVD)COLONY® SOFT T675.508 BATH/SHOWER Trim Kit

• Metal lever handle • Water Saving FloWise® Showerhead• Turbine Spray - 1.5gpm max. flow• Angle adjustable• Showerhead, arm and flange• Metal slip-on diverter tub spout


• Metal lever handle • Water Saving FloWise Showerhead• Turbine Spray - 1.5gpm max. flow• Angle adjustable• Showerhead, arm and flange

1.5gpm/5.7L/min. maximum flow rate

3" (76mm)

6"(153mm)

6-3/4"(172mm)

3" (76mm)

3" (76mm)

T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

1/2" COPPER

1/2" COPPER

1/2" COPPERT555.528

T555.527

TUB

SHR

T440.508

T440.507

9"(228mm)

Revised 10/13



R120


R125


R125SS


w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct


Stops

VA

LV

ES


Trim Kit Roughing-In DimensionsFinishesModel # / Description

1-1/2 REF.(38mm)

.002

.295

Polished Chrome

Satin Nickel (PVD)

T480.502 BATH/SHOWER Trim Kit• Brass wall escutcheon• Metal Lever handle• "Vario" adjustable showerhead• Shower arm and flange• Metal slip-on Diverter tub spout

T480.501 SHOWER ONLY Trim Kit• Brass wall escutcheon• Metal Lever handle• "Vario" adjustable showerhead• Shower arm and flange

T480.500 VALVE ONLY Trim Kit• Brass wall escutcheon• Metal Lever handle


SEVA™

18"(457mm)optional

7" REF.(178mm)

FINISHED WALL

BOTTOM OF TUB


(1880mm)

4" REF.(102mm)

5-1/8"REF.

(130mm) TOP OF TUB RIM

4" REF.(102 mm)

8"(203mm)

1-5/8" TO 3-1/4"(41mm - 83mm)

7-1/8"(181mm)

4-1/2"(113mm)

1-1/2 REF.(38mm)

PRINCETON® T508.502 BATH/SHOWER Trim Kit• Metal Lever Handle• Wall escutcheon• Showerhead, arm and flange• Metal slip-on diverter tub spout

• Metal Lever Handle• Wall escutcheon• Showerhead, arm and flange


T508.500 VALVE ONLY Trim Kit• Metal Lever Handle• Wall escutcheon


.002

.224

.295

Polished ChromeOil Rubbed BronzeSatin Nickel (PVD)

18"(457mm)optional

3-5/8"(92mm)optional

5-1/2" REF.(140mm)

FINISHEDWALL

BOTTOM OF TUB


(1880mm)

3-5/8" REF.(92mm)

5" REF.(127mm)

TOP OF TUB RIM

4" REF.(102 mm)

1-5/8" TO 3-1/4"(41mm - 83mm.)

8-1/8"(205mm)

Off

Hot

RELIANT® 3 T385.508 BATH/SHOWER Trim Kit

• Metal wall escutcheon• Metal lever handle• Water Saving FloWise® Showerhead • Turbine Spray-1.5gpm max. flow• Angle adjustable• Shower arm and flange• Metal slip-on diverter tub spoutT385.507 SHOWER ONLY Trim Kit

• Metal wall escutcheon• Metal lever handle• Water Saving FloWise® Showerhead • Turbine Spray-1.5gpm max. flow• Angle adjustable• Shower arm and flange


.002

.295

Polished Chrome

Satin Nickel (PVD)FINISHED WALL

4"(102mm)

TOP OF TUB RIM

18"(457mm)optional

BOTTOM OF TUB


(1880mm)

1-5/8" TO 3-1/4"(41mm - 83mm)

5-1/2" REF(140mm)

1-1/2" REF.(38mm)

7-3/8" REF(187mm)

3-3/4" REF(95mm)

B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500

7-1/2"(191mm)

7-1/2"(191mm)

3" (76mm)

T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

1/2" COPPER

1/2" COPPER

1/2" COPPER

PRINCETON® T508.508 BATH/SHOWER Trim Kit

• Metal Lever Handle• Wall escutcheon• Water Saving FloWise® Showerhead• Shower arm and flange• Metal slip-on diverter tub spout

• Metal Lever Handle• Wall escutcheon• Water Saving FloWise® Showerhead• Shower arm and flange



.002

.224

.295


T555.528

T555.527

TUB

SHR

T440.508

T440.507

1-1/2 REF.(38mm)

18"(457mm)optional

3-5/8(92mm)optional

8-1/2" REF.(216mm)

FINISHEDWALL

BOTTOM OF TUB


(188cm)

4-7/8" REF.(124mm)

5" REF.(127mm)

TOP OF TUB RIM

4" REF.(102 mm)

1-5/8" TO 3-1/4"(41mm - 83mm.)

8-1/8"(205mm)

Off

Hot

1/2" COPPER

Revised 10/13



R120


R125


R125SS


w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct


Stops

VA

LV

ES


Trim Kit Finishes Roughing-In Dimensions

• Metal wall escutcheon• Metal Lever Handle• Water Saving FloWise 3-Function Showerhead• Metal slip-on diverter tub spout

T420.501 SHOWER ONLY Trim Kit• Metal wall escutcheon• Metal Lever Handle• Water Saving FloWise 3-Function Showerhead


• Metal wall escutcheon• Metal Lever Handle

2.0gpm/7.6L/min. [maximum flow rate

.002

.224

.295

Polished ChromeOil Rubbed Bronze

Satin Nickel (PVD)

T420.502 BATH/SHOWER Trim Kit PORTSMOUTH®

• Decorative square wall escutcheon• Metal Lever Handle• Water Saving FloWise 3-Function Showerhead• Metal slip-on diverter tub spoutT415.501 SHOWER ONLY Trim Kit• Decorative square wall escutcheon• Metal Lever Handle• Water Saving FloWise 3-Function Showerhead

T415.500 BATH/SHOWER Trim Kit• Decorative square wall escutcheon• Metal Lever Handle

2.0gpm/7.6L/min. [maximum flow rate

.002

.224

.295


T415.502 BATH/SHOWER Trim KitPORTSMOUTH®

Model # / Description

.002T000.502 BATH/SHOWER Trim Kit• Brass wall escutcheon• Metal Lever handle• "Vario" adjustable showerhead• Cast Brass shower arm• Cast Brass diverter tub spout

T480.508 BATH/SHOWER Trim Kit• Brass wall escutcheon• Metal lever handle• Water Saving FloWise® Showerhead • Turbine Spray-1.5gpm max. flow• Angle adjustable• Shower arm and flange• Metal slip-on diverter tub spout

T000.501 SHOWER ONLY Trim Kit• Brass wall escutcheon• Metal Lever handle• "Vario" adjustable showerhead• Cast Brass shower arm

T000.500 VALVE ONLY Trim Kit• Brass wall escutcheon• Metal Lever handle


Polished Chrome

.002

.295

Polished Chrome

Satin Nickel (PVD)

CERAMIX®

18"(457mm)optional

1/2" REF.(13mm)

7" REF.(178mm)

FINISHED WALL

BOTTOM OF TUB


(1880mm)

4" REF.(102mm)

1-5/8" TO 3-1/4"(41mm - 83mm)

7-1/8" REF.(182mm)

6-11/16"(170mm)

4-3/4"(121mm)

5" REF.(127mm)

TOP OF TUB RIM

4" REF.(102 mm)

TOP OF TUB RIM

TOP OF TUB RIM

Note: Trim kits CANNOT be used with Ceramix spool type valves.

SEVA™


• Metal wall escutcheon• Metal lever handle• Water Saving FloWise Showerhead • Turbine Spray-1.5gpm max. flow• Angle adjustable• Shower arm and flange


B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500

FINISHED WALL

4"(102mm)

TOP OF TUB RIM

18"(457mm)optional

BOTTOM OF TUB


(1880mm)

1-5/8" TO 3-1/4"(41mm - 83mm)

5-1/8" REF(130mm)

1-1/2" REF.(38mm)

7" REF(178mm)

4" REF(102mm)

8"(203mm)

7-1/8"(181mm)

4-1/2"(113mm)

T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

1/2" COPPER

1/2" COPPER

1-5/8" TO 3"(41mm TO 76mm)FINISHED

WALL

4"(102 mm)

BOTTOM OF TUB

74" FORHEAD

CLEARANCE(1880mm)

18"OPTIONAL(457mm)

5-1/8" REF.(130 mm)

1/2" NPT

7-5/8"(194 mm)

OPTIONAL TOFINISHED FLOOR

USUALLY BETWEEN65'' AND 78''

(1651mm - 1981mm)

8-1/2"(216mm)

REF.

4-7/8"(125mm)REF.

1/2"COPPER

1-1/2" REF.(38mm)

6-1/2"(165 mm)

1-5/8" TO 3"(41mm TO 76mm)FINISHED

WALL

4"(102 mm)

BOTTOM OF TUB

74" FORHEAD

CLEARANCE(1880mm)

18"OPTIONAL(457mm)

5-1/8" REF.(130 mm)

1/2" NPT

7-5/8"D.(195 mm)

OPTIONAL TOFINISHED FLOOR

USUALLY BETWEEN65'' AND 78''

(1651mm - 1981mm)

8-1/2"(216mm)

REF.

4-7/8"(125mm)REF.

1/2"COPPER

1-1/2" REF.(38mm)

T555.528

T555.527

TUB

SHR

T440.508

T440.507

Revised 10/13


R120


R125


R125SS


w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct


Stops

VA

LV

ES


Model # / DescriptionTrim Kit Finishes Roughing-In Dimensions

B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500

MOMENTS® T506.502 BATH/SHOWER Trim Kit Polished Chrome


.002


• Brass wall escutcheon• Adjustable “3 function” showerhead• Brass slip-on diverter tub spout

• Brass wall escutcheon• Adjustable “3 function” showerhead

• Brass wall escutcheon


5-5/8" REF.(143mm)

BOTTOM OF TUB

74" FORHEAD CLEARANCE

(1880mm)

FINISHED WALL

4"(102mm)

6-1/2"(165mm)

18"(457mm)

OPTIONAL

TOP OFTUB RIM

8-3/8"(213mm)

2-3/8"(60mm)

3/4" TO 2-3/8"(19mm-60mm)

SHR

TUB

1-1/2" REF. (38mm)

.002

.224

.295


.002

.224

.295


COPELAND™

COPELAND™

TOP OFTUB RIM



• Metal Lever Handle• Metal wall escutcheon• Metal slip-on diverter tub spout

• Metal Lever Handle• Metal wall escutcheon

• Metal Lever Handle• Metal wall escutcheon



FINISHED WALL

102mm(4")

BOTTOM OF TUB

108mm(4-1/4") REF.

41mm TO 76mm(1-5/8" TO 3")

457mm(18")

OPTIONAL

124mm(4-7/8") REF.

191mm(7-1/2")

38mm REF.(1-1/2")

152mm(6") REF.

74" (1880mm)FOR HEAD

CLEARANCE

T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

1/2" COPPER

1/2" COPPER

MOMENTS® T506.508 BATH/SHOWER Trim Kit Polished Chrome


.002• Brass wall escutcheon• Water Saving FloWise 3-Function Showerhead• Brass slip-on diverter tub spout

• Brass wall escutcheon• Water Saving FloWise • 3-Function Showerhead


BOTTOM OF TUB

74" FORHEAD CLEARANCE

(1880mm)

FINISHED WALL

4"(102mm)

6-1/2"(165mm)

18"(457mm)

OPTIONAL

TOP OFTUB RIM

8-3/8"(213mm)

3/4" TO 2-3/8"(19mm-60mm)

SHR

TUB

1-1/2" REF. (38mm)

1/2"COPPER

1/2" NPT

215mm(8-1/2")

REF.

215mm(8-1/2")

REF.

122mm (4-3/4")

124mm (4-7/8")

REF.

32mm (1-1/4")DIA. HOLE

T555.528

T555.527

TUB

SHR

T440.508

T440.507

FINISHED WALL

TOP OF TUB RIM

BOTTOM OF TUB

1-5/8" TO 3"(41mm TO 76mm)

1/2" NPT

1/2" COPPERFOR SLIP-ON

SPOUT

OPTIONAL TO FINISHEDFLOOR USUALLY

BETWEEN 65'' AND 78''(1651mm-1981mm)

"SEE ILLUSTRATION "

216mm (8-1/2")

REF.

125mm (4-7/8")

REF.

7-1/2"(191mm)

1-1/2" REF.(38mm) REF.

4-7/8" REF.(124mm) REF.

4" (102 mm)

18" OPTIONAL(457mm)

74" DE (188cm) FOR HEAD

CLEARANCE



• Water Saving FloWise® 3-function showerhead• Metal slip-on diverter tub spout



• Water Saving FloWise® 3-function showerhead



Revised 10/13

B15© 2013 AS America Inc. Revised 10/13


R120


R125


R125SS


w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct


Stops

VA

LV

ES


B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500



• Metal wall escutcheon• Metal Lever Handle• Cast brass shower arm• Water Saving FloWise 3-Function

Showerhead• Metal slip-on diverter tub spout

• Metal wall escutcheon• Metal Lever Handle• Cast brass shower arm• Water Saving FloWise • 3-Function Showerhead


T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

T555.528

T555.527


TOWN SQUARE®




• Metal wall escutcheon• Metal Lever Handle• Cast brass shower arm• 4-1/2" Rain showerhead• Metal slip-on diverter tub spout

• Metal wall escutcheon• Metal Lever Handle• Cast brass shower arm• 4-1/2" Rain showerhead



TOWN SQUARE® .002

.224

.295

Polished Chrome

Oil Rubbed Bronze

Satin Nickel (PVD)



• Metal wall escutcheon• Metal Lever Handle• Water Saving FloWise®

3-function showerhead• Metal slip-on diverter tub spout

• Metal wall escutcheon• Metal Lever Handle• Water Saving FloWise® 3-function showerhead


.002 Polished Chrome

51mm(2") REF.

102mm(4")

25mm(1")

1880mm(74")

FOR HEADCLEARANCE

457(18")

OPTIONAL

FINISHED WALL

BOTTOM OF TUB

1/2" I.P.S.

194mm(7-5/8")

194mm(7-5/8")

TOP OFTUB RIM

1/2" COPPER

184mm(7-1/4" REF.)

41mm to 83mm(1-5/8" TO 3-1/4")

203mm(8") REF.

25mm(1")

124mm(4-7/8") REF.

102mm(4")

25mm(1")

1880mm(74")

FOR HEADCLEARANCE

457(18")

OPTIONAL

FINISHED WALL

BOTTOM OF TUB

1/2" I.P.S.

194mm(7-5/8")

194mm(7-5/8")

TOP OFTUB RIM

1/2" COPPER

184mm(7-1/4" REF.)

41mm to 83mm(1-5/8" TO 3-1/4")

216mm(8-1/2") REF.

25mm(1")

TUB

SHR

T440.508

T440.507

.002

.224

.295

Polished Chrome

Oil Rubbed Bronze

Satin Nickel (PVD)

Polished ChromeStainless Steel (PVD)

.002

.075GREEN TEA®

GREEN TEA®




• Metal wall escutcheon• 6 3/4" Rain showerhead• 12" Brass shower arm• Metal slip-on diverter tub spout• Metal Lever Handle

• Metal wall escutcheon• 6 3/4" Rain showerhead• 12" Brass shower arm• Metal Lever Handle



FINISHED WALL

102mm(4")

1880mm(74") FOR HEAD

CLEARANCE

457mm(18")

OPTIONAL

191mm(7-1/2")

Dia.

305mm(12") REF.

57mm(2-1/4")D.

TOP OF TUB RIM

BOTTOM OF TUB

127mm(5") REF.

41mm TO 76mm(1-5/8" TO 3")

117mm( 4-5/8")

REF.149mm(5-7/8")

REF.

1/2" NPT

1/2"COPPER

38mm(1-1/2")

FINISHED WALL

TOP OF TUB RIM

BOTTOM OF TUB

4-5/8" REF.(117mm)

5-7/8" REF.(149mm)

1/2" COPPER

7-1/2" DIA.(191mm)

"SEE ILLUSTRATION "

8-1/2" (216mm) REF.

137mm (5/3/8")

REF. OPTIONAL TO FINISHEDFLOOR USUALLY

BETWEEN 65'' (1651mm)AND 80'' (1880mm)

1-5/8" TO 3"(41mm TO 76mm)

4" (102 mm)


(188 cm)

18" OPTIONAL(457mm)

1/2" NPT(12.7 mm) NPT

1-3/4" REF.(44mm) REF.


R120


R125


R125SS


w/ ScrewdriverStops

R120SS


w/ ScrewdriverStops

R127

PEXInlets/Direct

SweatOutlets

R127SS

PEXInlets/Direct


Stops

VA

LV

ES

B/S

Shower

Valve

B/S

Shower

T675.502

T675.501

T675.500

T385.502

T385.501

T385.500

T385.522 T480.502

T480.501

T480.500

T508.502

T508.501

T508.500

TR

IM K

ITS

T480.508

T480.507

T385.508

T385.507

T675.508

T675.507

T000.502

T000.501

T000.500

T506.502

T506.501

T506.500

T420.508

T420.507

T420.500

T508.508

T508.507

T010.502

T010.501

T010.500

T440.502

T440.501

T440.500

B/S

Shower

Valve

B/S

Shower

Valve

TR

IM K

ITS

T415.508

T415.507

T415.500

T005.502

T005.501

T005.500

T590.500 VALVE ONLY Trim Kit• Brass wall escutcheon• Metal Lever Handle



T590.508 BATH/SHOWER Trim Kit• Brass wall escutcheon• Metal Lever Handle• Shower arm and flange• Water Saving FloWise 3-Function

Showerhead• Metal slip-on diverter tub spout

• Brass wall escutcheon• Metal Lever Handle• Shower arm and flange• Water Saving FloWise 3-Function

Showerhead

T005.508

T005.507

T506.508

T506.507

T010.508

T010.507

T555.522

T555.521

T555.520

T590.508

T590.507

T590.500

T555.528

T555.527



STUDIO®

with FloWise®




• Brass wall escutcheon• Metal Lever Handle• 12" Shower arm and flange• 6" Brass rain showerhead• Metal slip-on diverter tub spout

• Brass wall escutcheon• Metal Lever Handle• 12" Shower arm and flange• 6" Brass rain showerhead

• Brass wall escutcheon• Metal Lever Handle


QUENTIN™

QUENTIN™

.002

.295

Polished Chrome

Satin Nickel (PVD)41mm TO 83MM(1-5/8" TO 3-1/4")

BOTTOM OF TUB

1880mm (74")FOR

HEAD CLEARANCE

1/2" NPT

FINISHED WALL

102mm(4")

121mm(4-3/4")

1/2" COPPER

457mm(18")

OPTIONAL

TOP OF TUB RIM

TUB

SHR

210mm(8-1/4")

60mm(2-3/8")

25mm(1" MIN.)

124mm(4-7/8"REF.)

216mm(8-1/2" REF.)

171mm(6-3/4")

T440.508

T440.507

.002

.224

.295

Polished Chrome

Oil Rubbed Bronze

Satin Nickel (PVD)

.002

.224

.295

Polished Chrome

Oil Rubbed Bronze

Satin Nickel (PVD)

C

OFF

H

457mm(18")

optional

396mm REF.(15-9/16")

307mm(12")

1/2" NPT

152mm(6") DIA.

FINISHED WALL

BOTTOM OF TUB


(188cm)

166mm(6-1/2")

119mm REF.(4-5/8")

TOP OF TUB RIM

13mm (1/2")SLIP-ON SPOUT

102mm REF.(4")

41mm TO 83mm(1-5/8" TO 3-1/4")

234mm(9-1/4")

163mm(6-3/8")

C

H

163mm(6-3/8")

C

H




• 3-function showerhead• Metal slip-on diverter tub spout


• 3-function showerhead


C

H

BOTTOM OF TUB

4-13/16" REF.(121mm) REF. 1/2" COPPER

9-3/16"(233mm)

OPTIONAL TO FINISHEDFLOOR USUALLY

BETWEEN 65'' (1651mm)AND 80'' (1880mm)

TOP OF TUB RIM

1-5/8" TO 3"(41mm TO 76mm)

FINISHED WALL

4" (102 mm)


(188 cm)

18" OPTIONAL(457mm)

1/2" NPT(12,7 mm) NPT

216mm (8-1/2")

REF.

125mm (4-7/8")

REF.

1-1/2" REF.(38mm) REF.

"SEE ILLUSTRATION "

Revised 10/13


Documents

PRESSURE BALANCE BATH/SHOWER FITTING VOLUME AND ...igate.northernplumbing.com/specsheets/americanstandard/r120ss.pdfR127SS Pressure Balance Rough Valve Body only with Screwdriver stops