Upload
mary-wilson
View
230
Download
1
Tags:
Embed Size (px)
Citation preview
PROC GPLOT
GPLOT is used to make two dimensional scatter-plots.
General Syntax:
proc gplot data=data-set options;
plot y-variable*x-variable/options;
run;
quit;
Multiple Plot Calls in a Plot Statement
Multiple y-variable*x-variable calls are permitted in a plot statement, each generating a separate plot by default.• In the PROC GPLOT statement the uniform
option gives each plot the same axis scales.
• Assuming a common x-variable, the overlay option (in the plot statement) will cause the plots to be displayed on the same graph.
• A legend is created for overlay plots if the legend=legendn option is included.
Multiple Plot Calls in a Plot Statement
proc gplot data=save.padgett;plot totmass*plantht;/*now do more than one plot at a time*/
proc gplot data=save.padgett;plot totmass*plantht bllenavg*plantht;
/*we get two different plot*/
PLOT and PLOT2
The PLOT2 statement allows for a second vertical axis to be displayed. Conditions:• The x-variables in PLOT and PLOT2 must be
the same.
• Differing vaxis specifications can be made for each.
PLOT and PLOT2
/*to get two different y-axes, try this…/*
proc gplot data=save.padgett;plot lleaves*plantht; /*left*/
plot2 bllenavg*plantht;/*right*//*we get two plots on the same horizontal axis, but two different y-axes*/
Plots According to Third Variable
Plots of the form y-variable*x-variable=z-variable produces a plot for each level of the z-variable.• Overlaying of plots is automatic.
• A legend is produced automatically.
• This legend can be modified in a similar manner to that of legends in bar charts.
Plots According to Third Variable
proc gplot data=save.padgett;plot totmass*plantht=marsh/legend=legend1;/*distinguishes the plotting points by marsh and produces a legend so we can tell which is which…*/
/* modify the legend as below… */legend1 down=2 position=(top left inside) frame cborder=blue cframe=gray cshadow=red;
LEGEND Statement Options
across=n —Legend is created with n entries per row.
down=n —Legend is created with n entries per column
• Only one of ACROSS or DOWN should be specified.
LEGEND Statement Options
position=(P1 P2 P3) —Legend is positioned based on parameters specified.• Bottom, middle or top: Sets vertical position.
• Left, center or right: Sets horizontal position.
• Inside or outside: Places legend inside or outside the graph area.
• Default is (bottom center outside).
LEGEND Statement Options
mode=reserve|protect|share —Controls how space is allocated to the plot and the legend.• Reserve: Legend is allocated its own space in the
output area. This is the default; however, it cannot be used for position= (inside).
• Protect: The legend is “protected” from the plot—it is drawn over the plot. This is the default when position= (inside).
• Share: Graphics are drawn over the legend if there is any intersection.
LEGEND Statement Options
frame—Draws a frame around the legend in the first default color.
cborder= —Draws a frame around the legend in the specified color.
cframe= —Specifies the background color of the legend (or “fills” the frame).
cshadow= —Places a shadow “behind” the legend in the specified color.
LEGEND Statement Options
shape= —Controls appearance of the legend symbols. Specifications include:• bar(width, height)
• line(length)
• symbol(width, height)
label=(text-attributes ‘text’ ) —Defines the legend label text.
value=(text-attributes-n ‘text-n’ ) —Defines the text associated with each legend symbol.
LEGEND Statement Options Text attribute options include:
• c= Text color.
• f= Text font.
• h= Text height.
• t= (value= option only) Legend entry to be modified. Must precede the attributes being changed for that entry.
• position= (label= option only) Positions legend label. Same options as legend position except for inside/outside (legend label is always inside).
Axis Modification
As an option in the plot statement (after the / ) the user can specify haxis=axisn and/or vaxis=axisn to associate each axis with an axis statement.
A plot2 statement may include a vaxis=axisn specification as well.
Axis Modification
proc gplot data=save.projects;plot equipmnt*jobtotal/legend=legend1haxis=axis1 vaxis=axis2;where stname in (‘NC’ ‘SC’ ‘VA’);legend1 down=2 position=(top left inside) frame cborder=blue cframe=gray cshadow=red;
axis1 label=(“Equipment Cost” c=blueh=2 f=swissb) minor=none;axis2 label=(“Total Costs”);
The AXIS Statement
Axis statement options include:• c= (color=): Specifies the color of the axis
lines, tick marks and text.
• width= Specifies the thickness of the axis line.
• order=(value list or start to stop by increment): Specifies the data values
corresponding to the major tick marks.
• offset=(n1,n2): Specifies the space from the start of the axis to the first tick and the
end of the axis from the last tick, respectively.
The AXIS Statement
Axis statement options include:• label=(text-options ‘text’) or NONE: Defines
the axis label and its attributes.
• value=(text-options-n ‘text-n’) or NONE: Defines major tick labels and attributes. Can
be done as a group or one at a time.
The AXIS Statement
Attributes that can be specified within the label= and value= options:• c= Text color.
• f= Text font.
• h= Text height.
• a= Angle of the text string.
• r= Rotation of individual characters.
• t= (value= option only) Tick mark to be modified. Must precede the attributes being
changed for that tick.
Enhancing the Plot Area
The SYMBOL statement:• Modifies the plotting symbol and related items
symboln options;
• n can range from 1 to 255.
• If n is omitted it is taken as 1 by default.
• SYMBOL statements are global—remain in effect until altered.
• They are applied across the current color list if no color is specified.
Some SYMBOL Statement Options
v= (value=): Specifies the plotting symbol.
f= (font=): Specifies the font from which the plotting symbol is selected.
cv= Symbol color. h= (height=): Specifies the height of the
symbol [in cells]. pointlabel places y-value near each
point
Inheritance in SYMBOL Statements
SYMBOL statements are global, some behaviors:• Unmodified options will be inherited in
subsequent definitions of a symbol statement.
• Modifications to a symbol statement (e.g. symbol2) does not alter symbol statements with other numbers.
• The statement goptions reset=symbol cancels all currently defined symbol statements.
Symbols
Default symbol specifications and results:
Symbols
Write 3 symbol statements to change the colors, shapes,sizes of the 3 plotting symbols for “NC”, “SC” and “VA”
Go back to Padgett data and experiment with symbol statements
The GFONT Procedure
You can view a SAS/GRAPH font using PROC GFONT. The typical syntax will be:proc gfont name=font nobuild showroman
ctext=color ;run;
This code will display the font symbols with their standard counterparts. Fonts can be found in the fonts catalog in the SAShelp library.
Plot Lines
i= (interpol=): Specifies the interpolation method. Some of these include:• join: Joins the points with line segments
(“connect the dots”).
• sm##: Draws a smooth curve through the points, ## is a number that determines the level of smoothness (higher=smoother).
• needle: Draws vertical lines from the data to 0 (or the minimum value if all are
greater than 0).
Plot Lines
• R<type><0><CLM or CLI<##>> where:• type is L, Q or C corresponding to linear,
quadratic or cubic regression, respectively.
• 0 forces the regression through the origin.
• CLM and CLI specifies display of confidence limits for average (mean) predicted
values and individual predictions.
• ## specifies the confidence level between 50 and 99.
Plot Lines
The SYMBOL statement can be used to control plot lines:• l= (line=): Specifies a line type (various types
of dashed lines). Valid values go from 1 to 46.
• w= (width=): Specifies the line thickness.
• ci= Sets the line color.
• c= (color=): Sets colors for both lines and symbols.
Plot Lines
Now try your hand at some of the interpolation methods - see if you can find the best smoothing for total mass against plantht by marsh in the Padgett data…