12
Proceedings of the ASME International Mechanical Engineering Congress and Exposition -2010- VOLUME 7 Part B Fluid Flow, Heat Transfer and Thermal Systems presented at ASME 2010 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION NOVEMBER 12-18, 2010 VANCOUVER, BC, CANADA ASME Three Park Avenue * NewYork, N.Y. 10016

Proceedings of the ASME ; Vol. 7 · Optical Density MeasurementsandAnalysisfor ... Experimental Characterization of EHD Flowin anElectrostatic Air-Oil ... 6th symposiumonrecentdevelopmentsin

Embed Size (px)

Citation preview

Proceedings of the ASME

International Mechanical Engineering

Congress and Exposition

-2010-

VOLUME 7

Part B

Fluid Flow, Heat Transfer and

Thermal Systems

presented at

ASME 2010 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION

NOVEMBER 12-18, 2010

VANCOUVER, BC, CANADA

ASME

Three Park Avenue * NewYork, N.Y. 10016

PART B

SYMPOSIUM ON DIAGNOSTICS IN THERMO-FLUID SYSTEMS

IMECE2010-38206 895

Optical Density Measurements and Analysis for Single-Mode Initial-Condition

Buoyancy-Driven MixingYuval Doron and Andrew Duggleby

IMECE2010-39728 909

Low Reynolds Number Flow Control Over an Airfoil Using Synthetic Jet Actuators

Sebastian D. Goodfellow, Serhiy Yarusevych, and Pierre Sullivan

IMECE2010-39738 917

Effect of Asymmetric Jet Placement on Turbulent Flow Structure Inside a

Jet-Stirred Reactor

Khaled J. Hammad and Ivana M. Milanovic

IMECE2010-40332 -927

Experimental Characterization of EHD Flow in an Electrostatic Air-Oil Droplets Separator

Using Particle Image Velocimetry

Xiangling Kong, Mohamed Alshehhi, Afshin Goharzadeh, Amir Shooshtari,

Serguei Dessiatoun, and Michael Ohadi

SYMPOSIUM ON FLUID APPLICATIONS AND CLEAN ENERGY SYSTEMS

IMECE2010-37338 935

Safety and Reliability Studies Using Analysis Tools

Philip Diwakar and Jonathan Berkoe

IMECE2010-37421 945

An Innovative Design Methodology for Optimum Cavitating Inducer Performance

Maria Pascu, Brian Millward, Gordon Howat, and Tom Purdom

IMECE2010-37471 957

Research on Heat Exchange Characteristics Between Rock and High-Pressure Fluid

Through the Cranny Among Dry Hot Rocks

Lun Li, Jishun Li, Shengqi Zhang, Wei Ma, and Yujun Xue

IMECE2010-37525 963

Heat Transfer Enhancement for Flows in a Channel With Corona Wind Generator

J. Zhang and F. C. Lai

IMECE2010-37843 971

Experimental and Numerical Analyses of a Pressurized Air Receiver for Solar-Driven

Gas Turbines

lllias Hischier, Pascal Leumann, and Aldo Steinfeld

IMECE2010-38863 981

Experimental Testing of Periodic Roughness Elements on a Small Scale Wind

Turbine Blade

Jason R. Gregg and Kenneth W. Van Treuren

IMECE2010-39099 989

Computational Fluid Dynamics Simulations of an Inertance Type Pulse Tube RefrigeratorDion Savio Antao and Bakhtier Farouk

IMECE2010-39641 997

Combustion of Hydrogen Enriched Hydrocarbon Fuels in Vortex Trapped Combustor

Chaouki Ghenai and Khaled Zbeeb

IMECE2010-39973 1005

CFD Simulation of Flow in a Circular Pipe With Percina Rex Fish

Sreekanth Bangaru and Jie Cui

IMECE2010-40368 1011

A CFD Study and Geometrical Improvement on Heavy Duty Diesel Engine for

Ultra-Low Emissions

H. Koten, M. Yilmaz, and M. Z. Gul

IMECE2010-40480 1023

Effect of Geometric Parameters on the Performance of a Radial Flow Pressure

Exchange EjectorMuhammad Umar and Charles A. Garris

IMECE2010-40571 1035

Hybrid Liquid-Air Transpired Solar Collector: Model Development and Sensitivity AnalysisAbdul Qadir and Peter R. Armstrong

6th symposium on recent developments in multi-phase flow

IMECE2010-37303 1041

PIV Measurements of Cavitation Bubble Collapse Flow Induced by Pressure Wave

Sheng-Hsueh Yang, Shenq-Yuh Jaw, and Keh-Chia Yeh

IMECE2010-37331 1051

CFD Simulation of Human Coughs and Sneezes: A Study in Droplet Dispersion,

Heat, and Mass Transfer

Amir A. Aliabadi, Steven N. Rogak, Sheldon I. Green, and Karen H. Bartlett

IMECE2010-37564 1061

Numerical Studies of Stretching Liquid Bridges Between Two Spherical Solid Particles

With Different Contact AnglesPirooz Darabi, Konstantin Pougatch, Martha Salcudean, and Dana Grecov

IMECE2010-37645 1071

Numerical Simulation for Compressible Supercavitating Flow Over Disk-Cavitator

Qingchang Meng, Zhihong Zhang, Jubin Liu, Jiannong Gu, and Tao Miao

IMECE2010-39411 1079

Fuel Drop Spreading on a Flat Smooth Surface: Numerical Simulations With a VOF Method

Yan Zhang and Albert Ratner

IMECE2010-39737 1085

Average Droplet Diameter Spatial Distribution in a Spray After Gas-Assisted Atomization

Konstantin Pougatch, Martha Salcudean, and Jennifer McMillan

IMECE2010-40144 1095

Analytical Solution of Chamber Effective Length in the Axial EngineS. R. Dehghani, A. A. Mozafari, M. H. Saidi, and A. Ghafourian

IMECE2010-40147 1103

Effect of Entrance Position on Particle Dispersion in the Vortex EngineS. R. Dehghani, M. H. Saidi, A. A. Mozafari, and A. Ghafourian

IMECE2010-40213 1111

On the Modeling of Gas-Solid Fluidization: Which Physics Are Most Important to Capture?Francine Battaglia, Jonas A. England, Santhip Kanholy, and Mirka Deza

1MECE2010-40515 1121

Numerical and Experimental Study of the Interaction of a Spark-Generated Bubble and a

Vertical Wall

Arvind Jayaprakash, Georges Chahine, and Chao-Tsung Hsiao

IMECE2010-40526 1133

Optimum Configuration of an Expanding-Contracting-Nozzle for Thrust Enhancement by

Bubble InjectionSowmitra Singh, Jin-Keun Choi, and Georges Chahine

FORUM ON CFD ALGORITHMS AND APPLICATIONS FOR FLOW

OPTIMIZATION AND CONTROLS

IMECE2010-37137 1143

A Hybrid Unstructured Grid Generation Procedure for Boundary Layer and Wake Flow

Seyed Saied Bahrainian and Zahra Mehrdoost

IMECE2010-37355 11B3

Numerical Study of the Flow in the Wake of an Impulsively Started Rotating and

Translating Circular Cylinder

S. K. Ghosh, S. K. Mukherjea, and B. N. Datta

IMECE2010-37928 1163

Numerical and Experimental Investigation on Performance of Dual Fuel D87 Engine

A. Gharehghani, A. Jazayeri, M. Mirsalim, and M. Ghanbari

IMECE2010-37935 1171

Computational Development of a Gas to Liquid Heat Exchanger With a Breathing OperationRichard N. Jorgenson and James D. Van de Ven

IM EC E2010-37984 1177

Separation System Design and Equipments Performance Optimization for High-Viscosityand High-Density Drilling Fluid

Renbo Xu, Jingjiang Deng, and Xiaoguang Liu

IMECE2010-38614 1181

Inverse Analytical and Computational Design Method Applied to a Low Pressure Axial Fan

Mihai Miclea-Bleiziffer, Philipp Epple, and Antonio Delgado

IMECE2010-39050 1193

A Design Method of Radial Fans Considering the Torque-Speed-Characteristic of the Motor

Philipp Epple, Mihai Miclea, Klaus Pfannschmidt, Detlev Grobeis, and Antonio Delgado

IMECE2010-39081 1201

Exact Solution of the Plane Flow and Slip Factor in Arbitrary Radial Blade Channels and

Extended Design Method for Radial ImpellersTobias Hetzer, Philipp Epple, and Antonio Delgado

IMECE2010-39574 1211

Basic Numerical Assessments to Perform a Quasi-Complete LES Toward

IC-Engine ApplicationsFederico Brusiani and Gian Marco Bianchi

IMECE2010-39752 1227

Waves Simulation in an Excited Cylindrical Tank Using s -Transformation

M. Eswaran and Ujjwal K. Saha

IMECE2010-40032 1235

A Novel Pneumatic Non-Contact Suction Pad With Embedded Air Bearings

Jyh-Chyang Renn and Chin-Yi Cheng

1MECE2010-40600 1241

Optimized Design of Regenerative Blowers for Enhanced Efficiency

ChienHsiang Wang and Chang-Hwan Choi

MICROFLUIDICS 2010 FORUM: FLUID ENGINEERING IN MICRO- AND

NANOSYSTEMS

IMECE2010-37073 1249

Fluid Flow in Polygonal Micro Heat PipesSai Sashankh Rao and Harris Wong

IMECE2010-37420 1255

Numerical Simulation of a MicroChannel Heat Exchanger Using Steady-State and

Time-Dependent Solvers

Thanhtrung Dang and Jyh-tong Teng

IMECE2010-38037 1265

The Effect of Using Different Based Nanofluids on Trapezoidal Microchannels Cooling

Performance

P. Gunnasegaran, H. A. Mohammed, and N. H. Shuaib

IMECE2010-38039 1277

The Effect of Using Nanofluids on Triangular MicroChannel Heat Exchanger Performance

G. Bhaskaran, H. A. Mohammed, and N. H. Shuaib

IMECE2010-39051 1287

Hydrophobicity of Electrospun Nanofibers Films Characterized by a Quartz Crystal

Microbalance

Pengtao Wang, Minghao Song, Sai Liu, and Hongwei Sun

IMECE2010-39092 1295

Micro-PIV Measurements Near a Moving Contact Line

Jeremiah D. Zimmerman, Mark M. Weislogel, and Derek C. Tretheway

IMECE2010-39375 1299

MEMS Based Fabry-Perot Sensor for Measuring Flow VelocityVinay Kanive Manjunath and Anisur Rahman

IMECE2010-39815 1303

Experimental and Numerical Study of Transient Electronic Chip Cooling by Liquid Flow in

MicroChannel Heat Sinks

Jingru Zhang, Tiantian Zhang, and Yogesh Jaluria

IMECE2010-39816 1311

Numerical Simulation of Fluid Flow and Heat Transfer in U-Shape Microchannels

Tiantian Zhang, Li Jia, Jingru Zhang, and Yogesh Jaluria

IMECE2010-40090 1321

Stability of Liquid Films

Aneet D. Narendranath, Jeramy K. Kimball, James C. Hermanson, Robert W, Koikka, and

Jeffrey S. Allen

IMECE2010-40174 1333

Mixing in a Rotating Micro-Channel

Wallace Woon-Fong Leung and Yong Ren

IMECE2010-40254 1337

Experimental Investigations of Laminar, Transitional to Turbulent Gas Flow in a

Micro-Channel

Chungpyo Hong, Toru Yamada, Yutaka Asako, Mohammad Faghri, Koichi Suzuki, and

Ichiro Ueno

IMECE2010-40336 1345

The Liquid Bridge Heat Switch Design With Considering the Pressure Behavior to Regulatethe Thermal Resistance for the Temperature Control

Su-Heon Jeong, Wataru Nakayama, and Sun-Kyu Lee

IMECE2010-40722 1349

Modeling Fractal-Like Branching MicroChannel Heat ExchangersDouglas B. Heymann and Deborah V. Pence

IMECE2010-40737 1361

Synthesis of Ultra-Thin Superhydrophilic Titanium Oxide Film and its Effects on the

Capillary of Microchannels

Min Zhang, Bo Zhang, and Tianhong Cui

IMECE2010-40788 1365

Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy Walls

Liang Gong, Krishna Kota, Wenquan Tao, and Yogendra Joshi

IMECE2010-40976 1375

Modeling Extraction Regime Transitions for MicroChannel Vapor Extraction Map in

Two-Phase Cooling ApplicationsSaran Salakij, James A. Liburdy, and Deborah V. Pence

NUMERICAL AND EXPERIMENTAL HEAT TRANSFER

IMECE2010-37302 1387

Analysis of Enhanced Heat Transfer on a Turbine Blade Tip-Wall With and

Without Guide Ribs

Gongnan Xie, Bengt Sunden, Weihon Zhang, Esa Utriainen, and Lieke Wang

IMECE2010-37349 1395

An Microcosmic Absorption Model for Absorber in Solar Driven Absorption Heat PumpJian Sun, Lin Fu, and Shigang Zhang

IMECE2010-37354 1403

Effect of Pulsed Film Cooling on Leading Edge Film Effectiveness

Lamyaa A. El-Gabry and Richard B. Rivir

IMECE2010-37535 1411

Comparison of Turbulence Models With Experiment for Heat Transfer in a Cooling Channel

With DimplesKrishna Guntur, R. S. Amano, and Jose Martinez Lucci

IMECE2010-37702 1417

Flow and Heat Transfer Enhancement Characteristics of impinging Jets in Transitional

Time Periodic Flow RegimesJulian P. Gutierrez, Alfonso Ortega, and Amador M. Guzman

IMECE2010-37888 1423

A Study of Unsteady Mixed Convection in a Lid Driven Flow Inside a Rectangular CavityK. M. Akyuzlu and K. Hallenbeck

IMECE2010-37892 1433

A Numerical Study of Unsteady Natural Convection in a Rectangular Enclosure:

Transition From Laminar to Turbulent Flow

K. M. Akyuzlu and M. Chidurala

IMECE2010-37903 1445

Experimental Investigation of Natural Convective Heat Transfer From Horizontal, Inclined

and Vertical Cylinder With Constant Heat Flux

A. Gharehghani, R. Hossieni Abardeh, and M. M. Salahi

IMECE2010-38152 1453

Numerical Investigation of Mixed Convective Flow Through a Vertical Duct With a

Backward-Facing Step Using Nanofluids

A. A. Al-aswadi, H. A. Mohammed, and N. H. Shuaib

IMECE2010-38156 1465

A Study of Convective Heat Transfer and Pressure Drop Phenomena in

Curved Microchannels

Heng-Chih Tang, Tien-Chien Jen, Yi-Hsin Yen, and Jyh-Tong Teng

IMECE2010-38167 1481

A Numerical Study of Laminar and Turbulent Natural Convective Heat Transfer From an

Isothermal Vertical Plate With a Wavy Surface

Patrick H. Oosthuizen

IMECE2010-38175 1487

A Numerical Study of the Effect of Blind Opening on Laminar-to-Turbulent Transition in the

Flow Over a Simple Recessed Window-Plane Blind SystemPatrick H. Oosthuizen and David Naylor

IMECE2010-38373 1495

Experimental Investigation of Film Cooling Effectiveness for a New Shaped Hole at the

Leading EdgeT. Elnady, I. Hassab, L. Kadem, and T. Lucas

IMECE2010-38438 1505

Developing the Coaxial Dual-Pipe Heat Pipe for Applications of Heat Pipe Cooler

Chien-Chih Chen and Chen-Ching Ting

IMECE2010-38513 1513

Analytical Numerical Study of Coupled Hyperbolic Heat and Moisture Diffusion in

Porous Bodies

H. Basirat Tabrizi and S. Andarwa

IMECE2010-38523 1521

Numerical Study of Flow Fields and Heat Transfer Characteristics in an Impinging Slot Jet

With Buckling Phenomenon

Hong Yun So, Hyun Gi Yoon, and Myung Kyoon Chung

IMECE2010-38596 1531

CFD Simulations of Flow and Heat Transfer in a Zigzag Channel With Flow Pulsation

Bolaji O. Olayiwola, Gerhard Schaldach, and Peter Walzel

IMECE2010-38861 1543

Measuring Ignition Temperature and Heat Generation From Moist Propane-OxygenMixtures on Platinum

Katie Leichliter, Judi Steciak, Ralph Budwig, and Steve Beyerlein

IMECE2010-39055 1553

Submerged Jet Impingement Cooling of a Nanostructured Plate

Muhsincan Sesen, Ali Kosar, Ebru Demir, Evrim Kurtoglu, Nazli Kaplan, Hadi Cagdas Erk,

Wisam Khudhayer, and Tansel Karabacak

IMECE2010-39179.... 1559

Natural Convection in a Vertical Enclosure With Grooves

Yasuyuki Takatsu, Takashi Masuoka, and Takahiro Nomura

IMECE2010-39465 1565

Numerical Simulation in an Air Filled Cubical Enclosure With Protruding Heat Sinks

Israel Botello-Arredondo, Abel Hernandez-Guerrero, Marino Peha-Taveras,Victor Miranda-Razo, and Cuauhtemoc Rubio-Arana

IMECE2010-39604 1571

Natural Convectinon in Horizontal Fluid-Superposed Porous Layers Heated LocallyFrom Below

Aniruddha Bagchi and Francis A. Kulacki

IMECE2010-39702 1581

Performance and Emission Evaluation of Low Heat Rejection Direct Injection Diesel EngineFueled by Diesel: Turpentine Oil Blends

K. Anandavelu, N. Alagumurthi, and C. G. Saravanan

IMECE2010-39935 1589

CFD Analysis of Flow and Heat Transfer in a Novel Heat Sink for Electronic Devices

Bladimir Ramos-Alvarado, Peiwen Li, Hong Liu, and Abel Hernandez-Guerrero

IMECE2010-39953 1597

Effects of Shallow-Angle Jet Impingement and Free Stream Velocity on Heat Transfer

Lei Wang, Bengt Sunden, Andreas Borg, and Hans Abrahamsson

IMECE2010-40205 1603

Numerical Study of Flow and Heat Transfer Characteristics of Impinging Jets

Tarek M. Abdel-Salam

IMECE2010-40298 1611

Effect of Channel Orientation on the Distribution of the Heat Transfer Coefficient in

Smooth and Dimpled Rotating Rectangular Channels

Seokbeom Kim, Eun Yeong Choi, and Jae Su Kwak

IMECE2010-40315 1623

Numerical and Experimental Investigations on Mini Channel Liquid Metal Coolers for

Power Semiconductor Devices

M. Tawk, Y. Avenas, A. Kedous-Lebouc, and M. Petit

IMECE2010-40574 1633

Numerical Study on Mixed Convection in Porous Media in a Channel With an

Open Cavity Below

Bernardo Buonomo, Oronzio Manca, Paolo Mesolella, and Sergio Nardini

IMECE2010-40769 1643

Jet Inlet Condition Effect on the Heat Transfer From a Circular Impinging Air Jet

to a Flat Plate

Terry X. Van and Patricia Streufert

TWO-PHASE FLOW: BOILING AND CONDENSATION

IMECE2010-37625 ..1653

Experimental Study on Oblique Collisions of Water Droplets With Hot Solid

Hitoshi Fujimoto, Ryota Doi, Tomohiro Ogihara, Takayuki Hama, and Hirohiko Takuda

IMECE2010-37788 1663

Enhancement of Solution Wetting and Heat Transfer on Horizontal-Tube, Falling-FilmEvaporator Using Porous-Layer Coating

Sangsoo Lee and Chanwoo Park

IMECE2010-38419 1673

CFD Simulation of PWR Subchannel Void Distribution Benchmark

Wang-Kee In, Chang-Hwan Shin, and Tae-Hyun Chun

IMECE2010-38785 1681

Advanced Computational Modeling of Multiphase Boiling Flow and Heat Transfer

Huiying Li, Sergio A. Vasquez, and Peter Spicka

IMECE2010-39112 1693

Steady State Heat Transfer Models of C02 Condensing in a Vertical U-Tube

Yang Hu and David H. Archer

IMECE2010-40227 1701

Spatial and Temporal Wall Temperature Fluctuations in Two-Phase Flow in Microgap Coolers

Jessica Sheehan and Avram Bar-Cohen

YOUNG ENGINEER PAPER (YEP) CONTEST FLUIDS ENGINEERING

DIVISION

IMECE2010-39106 1709

X-Ray Particle Tracking of Dense Particle Motion in a Vibration-Excited Granular Bed

Timothy B. Morgan and Theodore J. Heindel

IMECE2010-39625 1719

A Discrete Meshless Lagrangian Based Approach for Soft Impact Damage Modeling in

Advanced Propulsion SystemsAaron Siddens and Javid Bayandor

IMECE2010-39665 1729

Optically Induced Rapid Electrokinetic Patterning of Non-Spherical Particles: Study of

Colloidal Phase Transition

Raviraj Vijay Thakur and Steven Wereley

GENERAL

IMECE2010-39659... 1735

Study of Behavior of Two Phase Flow in Vertical Large Diameter PipeMohammad Hassan Kebriayi, Hadi Karrabi, Mohsen Rezasoltani, and M. H. Saidi

Author Index 1743