Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Page 1
PRODUCT CATALOGUEHigh Pressure Cleaners / Hydro-jetting Equipment / Industrial Vacuums
17181
Page 2
WHY BUY JETWAVE?
Jetwave has specialised in directly importing, manufacturing and distributing, products to wholesale and retail clients throughout Australasia for over 20 years.
We cater for wide ranging industries and applications with the full capability of meeting our clients’ speci�cations and particular requirements.
Our comprehensive product range of industrial equipment includes high
pressure water cleaners, industrial vacuum cleaners, drain cleaners / hydro-jetters, accessories and a large range of spare parts.
Our products provide customers with quality and avant grade superior features and bene�ts by implementing cutting edge components and thorough methodical design into our range of products.
Cutting edge innovative products
Proven superior quality products
Deal direct with the manufacturer and importer
Australian made and owned*
Tailored solutions for high end industries
Comprehensive range of inventory
Page 3
High Pressure Water Cleaners
Drain Cleaning / Hydro-jetting Equipment Accessories
4 102
108 124
User Information
Industrial Vacuum Cleaners
146
THE MANUFACTURER RESERVES THE RIGHT TO MODIFY DESIGN FEATURES AND TECHNICAL FACTS WITHOUT NOTICE.
*JETWAVE’S RANGE ALSO INCLUDES FULLY IMPORTED PRODUCTS.
THIS STAR HIGHLIGHTS OUR MOST POPULAR MODELS.
Purpose Built Solutions
140
Page 4
Jetwave’s comprehensive range of high pressure water cleaners are superior in quality and performance.
Our machines are designed to deliver the best solution for our customers’ needs as they encapsulate stand out features and bene�ts that are a cut above the rest.
Within our diverse range of hot and cold petrol, diesel and electric driven units, with pressures from 1000 psi right up to 7000 psi, you can rest assured that there is a model to perfectly �t your particular application and requirements.
Ideal for the following applications and industries:
• Transportation / logistics• Primary / agricultural• Cleaning contractors• Oil and grease removal• Government and councils• Graf�ti removal• Civil construction• Defence and aviation ground support• Infrastructure wash down• Mining, oil & gas and
decontamination• Shipping wash down and
maintenance• Marine anti-fowling• Wine industry.
Page 5
High P
ressure Water C
leaners
Cold Water Electric - Page 6Cold Water Petrol - Page 40Cold Water Diesel - Page 52Hot Water Electric - Page 62
Hot Water Petrol / Diesel - Page 74
Page 6Page 6
Cold Water Electric Driven
Page 7
Why buy a cold water electric driven high pressure water cleaner?
Application Occasional Usage
Semi Frequent
Frequent
Domestic Cleaning
Vehicle Washing
Wall Washing
Machinery Wash down
Primary / Farming
Transportation & Logistics
Factory & Plant Wash down
Building Maintenance
Construction & Mining
Marine & Shipping
Aviation Ground Support
Beverage & Brewery Production
BEST
GOOD
NOT RECOMMENDED
Application and Machine Use Frequency
8 LPM 10 LPM 12 LPM
15 LPM >21 LPM
14 mins 12 mins 10 mins
8 mins 5 mins
Approximate Cleaning Time vs Flow Rate (LPM)
Our range of cold water electric high pressure water cleaners have been designed to meet demanding cleaning conditions in high end industries such as mining, oil and gas, and shipping. Our electric motors are supplied by industry leaders such as WEG, ABB and Nicolini & Co., which in turn guarantee a seamless performance, even in the harshest operating environments.The bene�ts of our electric driven pressure washer range includes a user friendly methodical design,
technologically advanced electrical control circuitry, zero noise and by-product emissions, leading to increased safety and lower maintenance and running costs. With the vast selection of units that are available within this product line, be assured that there will be a pressure washer to suit your cleaning needs. Additionally, our semi-professional machines would be an asset to any small business or home user to use on an occasional or semi-frequent basis.
Page 8
Standard Accessories Included
Built-in hose reel including 10m steel armoured hose.
Ergonomic spray gun with stainless steel back part lance and quick coupling connector.
Stainless steel straight lance with brass snap coupling for easy change over nozzle selection.
0°, 15°, 25°, 40° and low pressure snap-on nozzle attachments.
Raider 8.130
Sem
i-Pr
ofes
sion
al /
Elec
tric
Driv
en
Electric Powered
Cold Water
Standout Features and Bene�ts
Unit supplied by quality manufacturer.
Automatic total stop protection system for operational longevity of motor and pump.
Quality induction electric motor with thermal protection.
Solid brass pump head with brass inlet connection.
Adjustable detergent �ow dial.
Easy to �ll on-board detergent tank.
Built with quality components supported by world-wide spare parts back-up.
Single Phase
Semi-Frequent Usage
Page 9
Standard Speci�cations and Features
1900 psi pump working pressure.
2465 psi pump max pressure.
8 litres per minute water �ow rate.
3 axial-piston wobble plate high pressure pump.
2800 rpm pump running speed.
Removable water inlet strainer.
High pressure hose quick release coupling system.
Rotary ON / OFF switch for unit operation.
10m power supply lead with 10 amp plug.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
MODEL
Raider8.130
PRODUCT CODE
11183
WORKING PRESSURE PSI BAR
1900 130
RATED FLOW RATE L/PM
8
10m Additional Steel Armoured Hose.
Turbo Lance.
ELECTRIC MOTOR KW / POLE / Hz VOLT / PHASE
Induction 2.5KW / 2 / 50Hz 240v / Single
RPM
2800
APPROX WEIGHT (UNIT ONLY)
21.5kg
MACHINE DIMENSIONS
410mm (L) x 395mm (W) x 897mm (H)
BOXED DIMENSIONS
412mm (L) x 385mm (W) x 765mm (H)
Raider 8.130
Optional Extra Accessories
1
2
1
2
MAX INLETTEMP
60°C
MAX PRESSURE PSI BAR
2465 170
2
BUILT-IN HOSE REEL INCLUDING 10M STEEL ARMOURED HOSE.
EASY POWER SWITCH AND ADJUSTABLE DETERGENT FLOW DIAL.
QUALITY BRASS INLET.
SNAP-ON NOZZLE SELECTION.
ON-BOARD DETERGENT TANK.
MAX FLOW RATE L/PM
8.5
Page 10
QuickySemi-Frequent Usage
Electric Powered
Standout Features and Bene�ts
Unit supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Fully adjustable integral brass unloader valve for increased cleaning �exibility.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Strong upheld unit design based around longevity, easier maintenance schedule.
Robust grip handle for easy mobility.
Quality induction IPX5 electric motor with thermal protection.
Visible illumination switch for unit operation.
Standard Accessories Include
8m 1/4” wire braid high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part lance and quick coupling connector.
Front part lance featuring multi-regulated nozzle with adjustable spray fan and high / low pressure adjustment.
Cold Water
Sem
i-Pr
ofes
sion
al /
Elec
tric
Driv
en
Single Phase
Page 11
Standard Speci�cations and Features
1300 psi pump working pressure.
8 litres per minute water �ow rate.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
2800 rpm pump running speed.
Pressure gauge.
Easy to remove and clean in-line water inlet �lter.
Low pressure adjustable �ow detergent facility complete with tubing and pick-up �lter.
Pump directly coupled to hollow shaft electric motor.
High pressure hose quick release coupling system.
Brass corrosion proof inlet and outlet connection �ttings.
Removable polyethylene plastic cover / shroud.
Sturdy metal feet with rubber pads.
2.5m power supply lead with 10 amp plug.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
8
Optional Extra Accessories
Complete ‘Turbo’ Lance.
‘MR-O’ Brass High Pressure Swivel.
Additional High Pressure Hose; 1/4” Wire Braid.
Sandkit, Sandblasting Kit.
Foamkit, Foamer Kit.
Drainkit, Drain Cleaning Kit.
Thermal Valve for By-pass Pump Protection.
2800
Quicky
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
ELECTRIC MOTOR KW / POLE / Hz / VOLT / PHASE
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Interpump(Series 51)
FLOW RATE L/PM
Quicky8.90
2
1
1
3
2
3
00108 1300 90 2.2KW / 2 / 50Hz / 240v / Single
26kg 400mm (L) x230mm (W) x260mm (H)
420mm (L) x300mm (W) x310mm (H)
MAX INLETTEMP
60°C
Page 12
Strong upheld unit design based around longevity, easier maintenance schedule and improved ef�ciency.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Standard Accessories Include
8m 5/16” wire braid high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part lance and quick coupling connector.
Front part lance featuring multi-regulated nozzle with adjustable spray fan and high / low pressure adjustment.
Standout Features and Bene�ts
Unit supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Total stop protection system for operational longevity of motor and pump.*
Ergonomic user friendly wheelie trolley frame.
Easy �ll built-in / on-board detergent tank.
Fully adjustable integral brass unloader valve for increased cleaning �exibility.
User friendly gun, lance, hose and power cord holder.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
TX and TSX Range
Frequent Usage
Electric Powered
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
Single Phase
Page 13
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Standard Speci�cations and Features
1500 or 1900 psi pump working pressure.
10 or 12 litres per minute water �ow rate.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 rpm pump running speed.
Quality electric motor protected by thermal overload.
Accurate pressure gauge with glycerine.
Easy to remove and clean in-line water inlet �lter.
Low pressure adjustable �ow detergent facility.
Pump directly coupled to hollow shaft electric motor.
High pressure hose quick release coupling system.
Corrosion proof brass high pressure outlet �tting.
Sturdy high-impact resistant ABS plastic cover.
Solid rubber wheels for easy mobility.
5m power supply lead with 10 amp plug.
Complete operator and maintenance manuals.
TX and TSX Range
Optional Extra Accessories
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
LS3-1 Foaming Lance with Tank.
LS12 Foaming Lance.
Sandblasting Kit.
Lances of Different Lengths.
Thermal Valve for By-pass Pump Protection (TX model only).
TSX10-130
1
2
3
4
5
6
2
1
3
6
4
MODEL
TX12-100
TSX12-100
PRODUCT CODE
00105
00106
PUMP
InterpumpW112(Series 44)
InterpumpW112(Series 44)
WORKING PRESSURE PSI BAR
1500 100
1500 100
FLOW RATE L/PM
12
12
ELECTRIC MOTOR KW / POLE / Hz / VOLT / PHASE
3.2KW / 4 / 50Hz / 240v / Single
3.2KW / 4 / 50Hz / 240v / Single
RPM
1450
1450
APPROX WEIGHT (UNIT ONLY)
46kg
48kg
MACHINE DIMENSIONS
900mm (L) x 390mm (W) x 850mm (H)
900mm (L) x 390mm (W) x 850mm (H)
BOXED DIMENSIONS
630mm (L) x 430mm (W) x 640mm (H)
630mm (L) x 430mm (W) x 640mm (H)
5
TSX10-130 00110 InterpumpW130(Series 44)
1900 130 10 3.2KW / 4 / 50Hz / 240v / Single 1450 48kg 900mm (L) x 390mm (W) x 850mm (H)
630mm (L) x 430mm (W) x 640mm (H)
MAX INLETTEMP
* FEATURE AVAILABLE ONLY ON TSX MODEL.
60°C
60°C
60°C
Page 14
TX500 Range
Frequent Usage
Electric Powered
Standout Features and Bene�ts
Unit supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Automatic delayed total stop protection system for operational longevity of motor and pump.
Soft �exible coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Ergonomic user friendly trolley frame.
Easy �ll built-in / on-board large capacity detergent tank.
Fully adjustable integral brass unloader valve for increased cleaning �exibility.
On board user friendly gun, lance, hose and power cord stowage.
Integrated built-in hose reel for safety and convenience.
Built in electrical cable reel for added safety.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Strong upheld unit design based around longevity, easier maintenance schedule and improved ef�ciency.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Standard Accessories Include
15m 5/16” wire braid high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part lance and quick coupling connector.
Front part lance featuring multi-regulated nozzle with adjustable spray fan and high / low pressure adjustment.
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 15
Optional Extra Accessories
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
LS3-1 Foaming Lance with Tank.
LS12 Foaming Lance.
Sandblasting Kit.
Lances of Different Lengths.
TX500 Range Standard Speci�cations and Features
3000 psi pump working pressure.
15 or 21 litres per minute water �ow rate.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 rpm pump running speed.
Quality induction electric motor protected by thermal overload.
Accurate pressure gauge with glycerine.
Easy to remove and clean in-line water inlet �lter.
Adjustable low pressure adjustable detergent injection facility.
High pressure hose quick release coupling system.
Sturdy high-impact resistant ABS plastic cover.
Strong polyethylene plastic base frame.
Solid rubber wheels and front castor wheel with brake mechanism for increased safety and easy mobility.
5m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
1
2
3
4
5
6
2
1
66
3
4
5
3
MODEL
TX50015-200
TX50021-200
PRODUCT CODE
00101
00102
PUMP
InterpumpWS201(Series 47)
InterpumpWS202(Series 47)
WORKING PRESSURE PSI BAR
3000 200
3000 200
FLOW RATE L/PM
15
21
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE
7.5HP / 6KW / 13.8AMP / 5550Hz / 415v / 4 / Three
10HP / 7.5KW / 16.2AMP / 5550Hz / 415v / 4 / Three
RPM
1450
1450
APPROX WEIGHT (UNIT ONLY)
90kg
100kg
MACHINE DIMENSIONS
850mm (L) x 460mm (W) x 860mm (H)
850mm (L) x 460mm (W) x 860mm (H)
BOXED DIMENSIONS
890mm (L) x 560mm (W) x 920mm (H)
890mm (L) x 560mm (W) x 920mm (H)
MAX INLETTEMP
60°C
60°C
Page 16
Soft coupling mechanism connection to drive motor and pump for increased unit longevity in selected models resulting in reduced maintenance costs and downtime.
Standard or timer stop models available.
Standard Accessories Include
10m 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Front part lance featuring multi-regulated nozzle with adjustable spray fan and high / low pressure adjustment.
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Galvanised steel bulletproof and robust frame construction.
Strong upheld unit design based around longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable valve for unit longevity and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increase reliability.
Frequent Usage
Electric Powered
Cadet Junior
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
Single Phase
Page 17
Cadet Junior Standard Speci�cations and Features
1500 or 1900 psi working pressure.
10 or 12 litres per minute water �ow rate.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with easy oil indication sight glass.
Industrial strength fully welded and hot dipped galvanised role frame.
1450 rpm low pump running speed.
Quality electric motor protected by thermal overload.
Pump directly coupled to electric motor via hollow shaft or coupling drive arrangement.
Pressure switch con�guration for timer stop activation.*
Thermal valve for by-pass pump protection.*
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
10” heavy duty pneumatic wheels for easy mobility.
High pressure hose quick release coupling system.
8 metre power supply lead with 10 amp plug.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Optional Extra Accessories
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose with 30m Capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
‘LS12’ Foaming Lance.
Stainless Steel Snap-on Fittings.
Sandblasting Kits.
Lances of Different Lengths.
Optional Water Tank on Selected Models.
Timer Stop Shutdown Protection. *ADD TS TO PRODUCT
CODE ONLY AVAILABLE ON CADET JUNIOR 100C and 130C.
Total Stop System. *ADD TST TO PRODUCT CODE.
ONLY AVAILABLE ON CADET JUNIOR 100 and CADET 130.
1
2
3
4
5
7
8
6
2
1
55
3
4 6
MODEL
CadetJunior100
PRODUCT CODE
CW100-12MP
PUMP
InterpumpW112(Series 44)
WORKING PRESSURE PSI BAR
1500 100
FLOW RATE L/PM
12
ELECTRIC MOTOR KW / IPHz / VOLT / POLE / PHASE
Pump Motor Combo3.2KW / IP5550Hz / 240v / 4 / Single
RPM
1450
APPROX WEIGHT (UNIT ONLY)
50kg
MACHINE DIMENSIONS
700mm (L) x 610mm (W) x 920mm (H)
BOXED DIMENSIONS
640mm (L) x 600mm (W) x 580mm (H)
CUT OUT PROTECTION
No
CadetJunior100C
CW100-12CP
InterpumpW112(Series 44)
1500 100 12 Nicolini Coupling Drive3.2KW / IP5550Hz / 240v / 4 / Single
1450 55kg 780mm (L) x 610mm (W) x 920mm (H)
710mm (L) x 600mm (W) x 580mm (H)
No
CadetJunior130
CW130-10MP
InterpumpW130(Series 44)
1900 130 10 Pump Motor Combo3.2KW / IP5550Hz / 240v / 4 / Single
1450 50kg 700mm (L) x 610mm (W) x 920mm (H)
640mm (L) x 600mm (W) x 580mm (H)
No
CadetJunior130C
CW130-10CP
InterpumpW130(Series 44)
1900 130 10 Nicolini Coupling Drive3.2KW / IP5550Hz / 240v / 4 / Single
1450 55kg 780mm (L) x 610mm (W) x 920mm (H)
710mm (L) x 600mm (W) x 580mm (H)
No
7
3
8
MAX INLETTEMP
60°C
60°C
60°C
60°C * FEATURE PRESENT ONLY ON TIMER STOP MODELS.
CADET JUNIOR 130
Page 18
Quality Assured IP66 24 volt low voltage electrical control box for increased safety and protection against dust and water ingress.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Timer stop shutdown protection for machine protection.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Standout Features and Bene�ts
Quality Italian Nicolini & C. double �ange electric motor. > Totally enclosed fan cooled motor with black epoxy powder coated �nish to combat environmental corrosion. > IP55 degree of protection rating against dust and water ingress with an 86-87% ef�ciency rating. > Aluminium casing construction and zinc steel fan cover. > Thermal protection within motor incorporating Bimetal, PTC thermistor and PT100 devices. > Enclosed rigid radial type pre-lubricated ball bearings. > Class F winding insulation with class H double layer enamel insulated copper wire. > Mechanically and electrically sound to operate from -20˚C up to 40˚C at 95% or lower humidity level.
Two-bearing motor soft rubber coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Frequent Usage
Electric Powered
Cadet Timer Stop with 24 volt Control Voltage
NEW & IMPROVED
24 voltControl Voltage
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 19
Standard Speci�cations and Features
2320 to 3600 psi pump working pressure.
15 to 21 litres per minute water �ow rate.
Professional ‘Italian’ ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Industrial strength fully welded and hot dipped galvanised base and roll frame with galvanised cover and integrated gun and lance holder.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Thermal valve for by-pass protection.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure hose quick release coupling system.
8m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Cadet Timer Stop with 24 volt Control Voltage
8 9
MODEL
Cadet160
PRODUCT CODE
CW160-18CP24TS
PUMP
InterpumpWS162(Series 47)
WORKING PRESSURE PSI BAR
2320 160
FLOW RATE L/PM
18
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE / STARTER
Nicolini7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three / DOL
RPM
1450 Coupling Drive
APPROX WEIGHT (UNIT ONLY)
135kg
MACHINE DIMENSIONS
1100mm (L) x 770mm (W) x 720mm (H)
BOXED DIMENSIONS
1110mm (L) x 560mm (W) x 650mm (H)
Cadet200-15
CW200-15CP24TS
InterpumpWS201(Series 47)
3000 200 15 Nicolini7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three / DOL
1450 Coupling Drive
135kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
Cadet200-21
CW200-21CP24TS
InterpumpWS202(Series 47)
3000 200 21 Nicolini10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three / DOL
1450 Coupling Drive
145kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
MAX INLETTEMP
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” or 30” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Hour Meter for Usage and Service Tracking.
Stainless Steel Supply and By-Pass Water Tank for Pump Protection with Quality Float Valve.
Low Level Water Shut Down Protection.
Castor Wheels for Easy Mobility.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
223
8
1
2
3
4
5
7
8
6
9
10
11
11 10
9
4
6
7
5
60°C
60°C
60°C
Cadet 250
CW250-15CP24TS
InterpumpWS251(Series 47)
3600 250 15 1450 Coupling Drive
140kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
Nicolini10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three / DOL
60°C
Page 20
Quality Assured IP66 24 volt low voltage electrical control box for increased safety and protection against dust and water ingress.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Timer stop shutdown protection for machine protection.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel thermically insulated lance complete with soft trigger spray gun and nozzle.**
Standout Features and Bene�ts
Exclusive WEG W21 General Purpose Blue or W22 Industrial Green Motor. > ‘E2’ or ‘E3’ MEPS ef�ciency compliant motors saving energy and money. > IP55 (Blue) or IP66 (Green) degree of protection against dust and water ingress. > Class F or H winding insulation and class B3 temperature rise for continual operation in high ambient temperature or with high overload. > Impact-resistant aluminium (63 to 132) frames or high grade cast iron frames (160 upwards and W22 Green Industrial models) (including fan cover). > Low noise optimised cooling system to meet OH&S requirements and extend motor life. > Die cast aluminium rotor offers lower inertia, higher starting torques and superior mechanical rigidity.
Two-bearing motor soft rubber coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Frequent Usage
Electric Powered
Cadet Star
NEW & IMPROVED
24 voltControl Voltage
Timer Stop with 24 volt Control Voltage
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 21
Standard Speci�cations and Features
4000 to 5800 psi pump working pressure.
15 to 23 litres per minute water �ow rate.
Professional ‘Italian’ ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Industrial strength fully welded and hot dipped galvanised base and roll frame with galvanised cover and integrated gun and lance holder.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Thermal valve for by-pass protection.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.*
14” heavy duty double bearing pneumatic wheels for easy mobility.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure hose quick release coupling system.
8m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
11 10 8 9
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE / STARTER
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
MAX INLETTEMP
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” or 30” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Hour Meter for Usage and Service Tracking.
Upgrade to WEG W22 Industrial Green (IP66) Motor.
Stainless Steel Supply and By-Pass Water Tank for Pump Protection with Quality Float Valve.
Low Level Water Shut Down Protection.
Castor Wheels for Easy Mobility.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
223
8
1
2
3
4
5
7
8
6
9
10
11
11 10
9
4
6
75
CadetStar 275-15
CW275-15CP24TSB orCW275-15CP24TSG
Annovi Reverberi(AR) RK15.28N(Series 228)
4000 275 15 1450 viasoft rubberjaw coupling
250kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
Cadet Star275-21
CW275-21CP24TSB orCW275-21CP24TSG
InterpumpW3021(HP Series 66)
4325 300 21 1450 viasoft rubberjaw coupling
260kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
Cadet Star400
CW400-18CP24TSBorCW400-18CP24TSG
InterpumpW4018(HP Series 66)
5800 400 18 1450 viasoft rubberjaw coupling
285kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
CadetStar350
CW350-23CP24TSB orCW350-23CP24TSG
InterpumpW3523(HP Series 66)
5000 350 23 1450 viasoft rubberjaw coupling
285kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
WEG W21 Blue or W22 Green 15HP / 11KW / 20.5AMP / IP55(B) or IP66(G) / 50Hz / 415v / 4 / Three / Star-Delta
WEG W21 Blue or W22 Green 15HP / 11KW / 20.5AMP / IP55(B) or IP66(G) / 50Hz / 415v / 4 / Three / Star-Delta
WEG W21 Blue or W22 Green 20HP / 15KW / 28AMP / IP55(B) or IP66(G) / 50Hz / 415v / 4 / Three / Star-Delta
WEG W21 Blue or W22 Green 20HP / 15KW / 28AMP / IP55(B) or IP66(G) / 50Hz / 415v / 4 / Three / Star-Delta
60°C
60°C
60°C
60°C
3 YEAR MOTOR WARRANTY
* FEATURE PRESENT ONLY ON CADET STAR MODELS 275-15 AND 275-21.
** FEATURE PRESENT ONLY ON CADET STAR MODELS 350 AND 400.
12
12
Cadet Star Timer Stop with 24 volt Control Voltage
Page 22
Frequent Usage
Electric Powered
Cold Water
Cadet High TemperatureTimer Stop with 24 volt Control Voltage
Standout Features and Bene�ts
Up to 85˚C inlet high temperature pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Quality Italian Nicolini & C. double �ange electric motor. > Totally enclosed fan cooled motor with black epoxy powder coated �nish to combat environmental corrosion.
> IP55 degree of protection rating against dust and water ingress with an 86-87% ef�ciency rating.
> Aluminium casing construction and zinc steel fan cover.
> Thermal protection within motor incorporating Bimetal, PTC thermistor and PT100 devices.
> Enclosed rigid radial type pre-lubricated ball bearings.
> Class F winding insulation with class H double layer enamel insulated copper wire.
> Mechanically and electrically sound to operate from -20˚C up to 40˚C at 95% or lower humidity level.
Two-bearing motor soft coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Galvanised steel bulletproof and robust frame construction.
Quality assured IP66 steel powder coated 24 volt low voltage electrical control box for protection against dust and water ingress.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Low level water shutdown option available.
Timer stop shutdown protection for machine protection.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
NEW & IMPROVED
24 volt Control Voltage
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 23
Standard Speci�cations and Features
2320 psi pump working pressure.
18 or 23 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Industrial strength fully welded and hot dipped galvanised base and roll frame with galvanised cover and integrated gun and lance holder.
Pressure switch con�guration for timer stop activation.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure hose quick release coupling system.
8m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” or 30” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Hour Meter for Usage and Service Tracking.
Stainless Steel Supply and By-Pass Water Tank for Pump Protection with Quality Float Valve.
Low Level Water Shutdown Protection.
Castor Wheels for Easy Mobility.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
22 3
8
1
2
3
4
5
7
8
6
9
10
11
11 10 9
4
6
7
5
11 10 8 9
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATEL/PM
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Cadet HT160-18
CW160-18CPHT24
InterpumpHT4718(47.HT Series)
2320 160 18 Nicolini7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three
1450 135kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
MAX INLETTEMP
Cadet HT160-23
CW160-23CPHT24
InterpumpHT4723(47.HT Series)
2320 160 23 Nicolini10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three
1450 145kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
85°C
85°C
MAXIMUM INLET TEMPERATURE DROPS TO 75°C DUE TO PRESSURE SWITCH LIMITATIONS.
Cadet High Temperature Timer Stop with 24 volt Control Voltage
SHOWN WITH OPTIONAL WATER TANK.
Page 24
Cadet MineTimer Stop with 24 Volt Control VoltageFrequent
Usage
Electric Powered
Standout Features and Bene�ts
Exclusive WEG W22 Specialised Mining Motor.
> ‘E3’ MEPS high ef�ciency compliant motors, saving energy and money. > IP66 degree of protection against dust and water ingress. > Class H winding insulation and Class B temperature rise for continual operation in high ambient temperature or with high overload. > Impact-resistant FC-200 high density cast iron construction (including the fan and fan cover), designed for tough mining conditions. > Painted in X15 Electric Orange as standard. This is a recognised standard of many Australian mine sites. > Low noise optimised cooling system to meet OH&S requirements and extend motor life. > Extended lubrication intervals, reducing maintenance costs. > Mechanically and electrically sound to operate at up to 55°C at 100% load, or 25% continual overload at up to 40°C. > High locked rotor and breakdown torques, keeping up with the toughest load and voltage oscillations.
Purpose built, sturdy and robust welded and hot dipped galvanised frame with full galvanised cover and integrated gun and lance holder.
Based on cutting edge technology, which provides extended unit life, lower maintenance, cutting carbon emissions and operating costs, enhanced cleaning ef�ciency, reliability and increased safety features.
In-built 304 grade stainless steel supply and by-pass water tank for pump protection.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Quality unparalleled industry proven ‘Italian’ pump and components.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and workability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised �exible rubber jaw coupling to eliminate potential motor crankshaft distortion and / or damage.
Industrial bulletproof and tough overall construction being completely rated to a minimum of IP66.
Unique steel powder coated IP66 24 volt low voltage electrical control box for increased safety.
Timer stop shutdown protection for machine protection.
Standard Accessories Included
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
NEW & IMPROVED
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 25
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
Stainless Steel Snap-on Fittings.
Hour Meter for Usage and Service Tracking.
Fitted Fire Extinguisher.
Stainless Steel Water Tank on selected models.
Low Level Water Cut Out Protection.
Foam Filled Puncture Proof Wheels.
Standard Speci�cations and Features
3000 psi pump working pressure.
15 or 21 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with easy oil indication sight glass.
Integrated safety emergency stop shutdown button.
High pressure safety valve included.
1450 rpm low pump running speed with easy oil indication sight glass.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.
Complete operator and maintenance manuals, including detergent tubing and chemical �lter.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
WEG 3 Year Motor Warranty.
Optional Extra Accessories
Cadet Mine Timer Stop with 24 volt Control Voltage
1
2
3
4
5
7
6
1
5
334
6
2
7
MODEL
Cadet Mine201
Cadet Mine 202
PRODUCT CODE
CW201-15MS
CW202-21MS
PUMP
InterpumpWS201(Series 47)
InterpumpWS202(Series 47)
WORKING PRESSURE PSI BAR
3000 200
3000 200
FLOW RATE L/PM
15
21
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE / STARTER
RPM
1450 viasoft rubberjaw coupling
1450 viasoft rubberjaw coupling
APPROX WEIGHT (UNIT ONLY)
200kg
210kg
MACHINE DIMENSIONS
1110mm (L) x 880mm (W) x 760mm (H)
1110mm (L) x 880mm (W) x 760mm (H)
BOXED DIMENSIONS
1130mm (L) x 670mm (W) x 680mm (H)
1130mm (L) x 670mm (W) x 680mm (H)
MAX INLETTEMP
WEG W22 Mining7.5HP / 5.5KW / 10.1AMP / IP6650Hz / 415v / 4 / Three / DOL
WEG W22 Mining10HP / 7.5KW / 13.5AMP / IP6650Hz / 415v / 4 / Three / DOL
3 YEAR MOTOR WARRANTY
60°C
60°C
Page 26
Frequent Usage
Electric Powered
Standout Features and Bene�ts
Exclusive WEG W22 Specialised Mining Motor.
> ‘E3’ MEPS high ef�ciency compliant motors, saving energy and money. > Patented W3Seal® for IP66 degree of protection against dust and water ingress. > Class H winding insulation and Class B temperature rise for continual operation in high ambient temperature or with high overload. > Impact-resistant FC-200 high density cast iron construction (including the fan and fan cover), designed for tough mining conditions. > Painted in X15 Electric Orange as standard. This is a recognised standard of many Australian mine sites. > Low noise optimised cooling system to meet OH&S requirements and extend motor life. > Flush through re-greasing system with extended lubrication intervals, reducing maintenance costs. > Mechanically and electrically sound to operate at up to 55°C at 100% load, or 25% continual overload at up to 40°C. > High locked rotor and breakdown torques, keeping up with the toughest load and voltage oscillations.
Purpose built, sturdy and robust welded and hot dipped galvanised frame with full galvanised cover and integrated gun and lance holder.
Based on cutting edge technology, which provides extended unit life, lower maintenance, cutting carbon emissions and operating costs, enhanced cleaning ef�ciency, reliability and increased safety features.
In-built 304 grade stainless steel supply and by-pass water tank for pump protection.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Quality unparalleled industry proven ‘Italian’ pump and components.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and workability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised �exible rubber jaw coupling to eliminate potential motor crankshaft distortion and / or damage.
Industrial bulletproof and tough overall construction being completely rated to a minimum of IP66.
Unique steel powder coated IP66 24 volt low voltage electrical control box for increased safety.
Timer stop shutdown protection for machine protection.
Standard Accessories Included
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel thermically insulated lance complete with soft trigger spray gun and nozzle.**
NEW & IMPROVED
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Cadet Mine StarTimer Stop with 24 Volt Control Voltage
Page 27
Standard Speci�cations and Features
4000 to 5800 psi pump working pressure.
15 to 23 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with easy oil indication sight glass.
Integrated safety emergency stop shutdown button.
High pressure safety valve included.
1450 rpm low pump running speed with easy oil indication sight glass.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.
Complete operator and maintenance manuals, including detergent tubing and chemical �lter.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
WEG 3 Year Motor Warranty.
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
Stainless Steel Snap-on Fittings.
Hour Meter for Usage and Service Tracking.
Fitted Fire Extinguisher.
Stainless Steel Water Tank on selected models.
Low Level Water Cut Out Protection.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
Cadet Mine Star Timer Stop with 24 volt Control Voltage
1
2
3
4
5
7
6
1
5
334
6
2
7
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE / STARTER
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Cadet MineStar 275-15
CW275-15MS
Annovi Reverberi(AR) RK15.28(Series 228)
4000 275 15 1450 viasoft rubberjaw coupling
250kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
MAX INLETTEMP
Cadet Mine Star 275-21
CW275-21MS
Annovi Reverberi(AR) SXW21.28(Series 194)
4000 275 21 1450 viasoft rubberjaw coupling
260kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
Cadet Mine Star 400
CW400-18MS
InterpumpW4018(HP Series 66)
5800 400 18 1450 viasoft rubberjaw coupling
285kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
Cadet Mine Star 350
CW350-23MS
InterpumpW3523(HP Series 66)
5000 350 23 1450 viasoft rubberjaw coupling
285kg 1250mm (L) x 880mm (W) x 760mm (H)
1280mm (L) x 670mm (W) x 680mm (H)
WEG W22 Mining15HP / 11KW / 20.5AMP / IP6650Hz / 415v / 4 / Three / Star-Delta
WEG W22 Mining15HP / 11KW / 20.5AMP / IP6650Hz / 415v / 4 / Three / Star-Delta
WEG W22 Mining20HP / 15KW / 28AMP / IP6650Hz / 415v / 4 / Three / Star-Delta
WEG W22 Mining20HP / 15KW / 28AMP / IP6650Hz / 415v / 4 / Three / Star-Delta
3 YEAR MOTOR WARRANTY
* FEATURE PRESENT ONLY ON CADET MINE STAR MODELS 275-15 AND 275-21.
** FEATURE PRESENT ONLY ON CADET MINE STAR MODELS 350 AND 400.
60°C
60°C
60°C
60°C
Page 28
Frequent Usage
Electric Powered
Standout Features and Bene�ts
Exclusive, WEG W22 Specialised Industrial Motor.
> ‘E3’ MEPS high ef�ciency compliant motors, saving energy and money.
> IP66 degree of protection against dust and water ingress.
> Class H winding insulation and Class B3 temperature rise for continual operation in high ambient temperature or with high overload.
> Impact-resistant FC-200 high density cast iron construction designed for tough maritime conditions.
> Low noise optimised cooling system to meet OH&S requirements and extend motor life.
> Extended lubrication intervals, reducing maintenance costs.
> Mechanically and electrically sound to operate at 115% continual overload at up to 40°C.
> High locked rotor and breakdown torques, keeping up with the toughest load and voltage oscillations.
Purpose built, sturdy and robust welded and hot dipped galvanised frame with full galvanised covers, high visibility edges and four top lifting points for easy gantry crane mobility.
Based on cutting edge technology, which provides extended unit life, lower maintenance, reduced carbon emissions and operating costs, enhanced cleaning ef�ciency, reliability and increased safety features.
In-built 304 grade stainless steel supply and by-pass water tank for pump protection.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Quality unparalleled industry proven ‘Italian’ pump and components.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and workability.
Professional low pump running speed resulting in less maintenance time and increased reliability.
Specialised �exible rubber jaw coupling to eliminate potential motor crankshaft distortion and / or damage.
Industrial bulletproof and tough overall construction.
Quality Assured IP66 steel powder coated 24 volt low voltage electrical control box for increased safety and protection against dust and water ingress.
Timer stop shutdown protection for machine protection.
Standard Accessories Included
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
NEW60Hz / 440V
International Voltage
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Cadet MarineTimer Stop with 24 Volt Control Voltage
Page 29
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
Hour Meter for Usage and Service Tracking.
Safety Emergency Stop Shutdown Button.
TS12 Sandblaster Kit.
Fitted Fire Extinguisher.
Low Level Water Cut Out Protection.
Foam Filled Puncture Proof Wheels.
Standard Speci�cations and Features
3000 psi pump working pressure.
15 or 21 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with easy oil indication sight glass.
High pressure release safety valve.
1750 rpm low pump running speed with easy oil indication sight glass.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
Solid heavy duty wheels incorporating back castors with integrated brake for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.
10 metre long power supply lead.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
WEG 3 Year Motor Warranty.
Optional Extra Accessories
3 YEAR MOTOR WARRANTY
MODEL
Cadet Marine201
Cadet Marine202
PRODUCT CODE
CW201-15MB
CW202-21MB
PUMP
InterpumpW921(Series 47)
InterpumpW922(Series 47)
WORKING PRESSURE PSI BAR
3000 200
3000 200
FLOW RATEL/PM
15
21
ELECTRIC MOTORHP / KW / AMP / IPHz / VOLT / POLE / PHASE / STARTER
RPM
1750 viasoft rubberjaw coupling
1750 viasoft rubberjaw coupling
APPROX WEIGHT (UNIT ONLY)
210kg
220kg
MACHINE DIMENSIONS
1170mm (L) x 770mm (W) x 780mm (H)
1170mm (L) x 770mm (W) x 780mm (H)
BOXED DIMENSIONS
1180mm (L) x 670mm (W) x 710mm (H)
1180mm (L) x 670mm (W) x 710mm (H)
MAX INLETTEMP
WEG W22 Industrial7.5HP / 5.5KW / 10.1AMP / IP6660Hz / 440v / 4 / Three / DOL
WEG W22 Industrial10HP / 7.5KW / 13.5AMP / IP6660Hz / 440v / 4 / Three / DOL
1
2
3
4
5
7
6
8
1
5
33
4
6
2
7
8
60°C
60°C
Models also available in 50Hz / 415v motor con�guration.
Cadet Marine Timer Stop with 24 volt Control Voltage
Page 30
Frequent Usage
Electric Powered
Standout Features and Bene�ts
Exclusive, WEG W22 Specialised Industrial Motor. > ‘E3’ MEPS high ef�ciency compliant motors, saving energy and money. > IP66 degree of protection against dust and water ingress. > Class H winding insulation and Class B3 temperature rise for continual operation in high ambient temperature or with high overload. > Impact-resistant FC-200 high density cast iron construction (including fan cover) designed for tough maritime conditions. > Low noise optimised cooling system to meet OH&S requirements and extend motor life. > Flush through re-greasing system with extended lubrication intervals, reducing maintenance costs. > Mechanically and electrically sound to operate at 115% continual overload at up to 40°C. > High locked rotor and breakdown torques, keeping up with the toughest load and voltage oscillations.
Purpose built, sturdy and robust welded and hot dipped galvanised frame with full galvanised covers, high visibility edges and four top lifting points for easy gantry crane mobility.
Based on cutting edge technology, which provides extended unit life, lower maintenance, reduced carbon emissions and operating costs, enhanced cleaning ef�ciency, reliability and increased safety features. In-built 304 grade stainless steel supply and by-pass water tank for pump protection.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Quality unparalleled industry proven ‘Italian’ pump and components.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and workability.*
Professional low pump running speed resulting in less maintenance time and increased reliability.
Specialised �exible rubber jaw coupling to eliminate potential motor crankshaft distortion and / or damage.
Industrial bulletproof and tough overall construction.
Quality Assured IP66 steel powder coated 24 volt low voltage electrical control box for increased safety and protection against dust and water ingress.
Timer stop shutdown protection for machine protection.
Standard Accessories Included
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel thermically insulated lance complete with soft trigger spray gun and nozzle.**
NEW60Hz / 440V
International Voltage
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Cadet Marine StarTimer Stop with 24 Volt Control Voltage
Page 31
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
Hour Meter for Usage and Service Tracking.
Safety Emergency Stop Shutdown Button.
TS12 Sandblaster Kit.
Fitted Fire Extinguisher.
Low Level Water Cut Out Protection.
Foam Filled Puncture Proof Wheels.
Standard Speci�cations and Features
4000 to 5800 psi pump working pressure.
15 to 25 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with easy oil indication sight glass.
High pressure release safety valve.
1750 rpm low pump running speed with easy oil indication sight glass.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.*
Solid heavy duty wheels incorporating back castors with integrated brake for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.
10 metre long power supply lead.
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
WEG 3 Year Motor Warranty.
Optional Extra Accessories
3 YEAR MOTOR WARRANTY
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE / STARTER
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Cadet Marine Star 275
CW275-15MB
InterpumpW928(Series 47)
4000 275 15 1750 viasoft rubberjaw coupling
300kg 1230mm (L) x 850mm (W) x 820mm (H)
1240mm (L) x 720mm (W) x 710mm (H)
MAX INLETTEMP
Cadet MarineStar 300
CW300-25MB
InterpumpT3025(Series 66)
4350 300 25 1750 viasoft rubberjaw coupling
320kg 1230mm (L) x 850mm (W) x 820mm (H)
1240mm (L) x 720mm (W) x 710mm (H)
Cadet MarineStar 400
CW400-18MB
InterpumpT4018(HP Series 66)
5800 400 18 1750 viasoft rubberjaw coupling
320kg 1230mm (L) x 850mm (W) x 820mm (H)
1240mm (L) x 720mm (W) x 710mm (H)
Cadet MarineStar 350
CW350-21MB
Annovi Reverberi(AR) SXWA5.5G50N(Series 194)
5000 350 21 1750 viasoft rubberjaw coupling
320kg 1230mm (L) x 850mm (W) x 820mm (H)
1240mm (L) x 720mm (W) x 710mm (H)
WEG W22 Industrial15HP / 11KW / 20.5AMP / IP6660Hz / 440v / 4 / Three / Star-Delta
WEG W22 Industrial20HP / 15KW / 28AMP / IP6660Hz / 440v / 4 / Three / Star-Delta
WEG W22 Industrial20HP / 15KW / 28AMP / IP6660Hz / 440v / 4 / Three / Star-Delta
WEG W22 Industrial20HP / 15KW / 28AMP / IP6660Hz / 440v / 4 / Three / Star-Delta
1
2
3
4
5
7
6
8
1
5
33
4
6
2
7
8
* FEATURE PRESENT ONLY ON CADET MARINE STAR MODEL 275.
** FEATURE PRESENT ONLY ON CADET MARINE STAR MODELS 300 AND UPWARDS.
60°C
60°C
60°C
60°C
Models also available in 50Hz / 415v motor con�guration.
Cadet Marine Star Timer Stop with 24 volt Control Voltage
Page 32
Frequent Usage
Electric Powered
Cadet Junior Wall MountStandout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Quality Italian Nicolini & C. double �ange electric motor. > Totally enclosed fan cooled motor with black epoxy powder coated �nish to combat environmental corrosion. > IP55 degree of protection rating against dust and water ingress with an 86-87% ef�ciency rating. > Aluminium casing construction and zinc steel fan cover. > Thermal protection within motor incorporating Bimetal, PTC thermistor and PT100 devices. > Enclosed rigid radial type pre-lubricated ball bearings. > Class F winding insulation with class H double layer enamel insulated copper wire. > Mechanically and electrically sound to operate from -20˚C up to 40˚C at 95% or lower humidity level.
Two-bearing motor soft coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Bulletproof and robust wall mount frame construction.
IP65 or IP66* 240 volt electrical control box for protection against dust and water ingress.
Solid brass adjustable unloader valve for durability and increased serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard or timer stop models available.
Corrosion proof stainless steel frame.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Front part lance featuring multi-regulated nozzle with adjustable spray fan and high / low pressure adjustment.
NEW & IMPROVED
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
Single Phase
Page 33
Standard Speci�cations and Features
1500 or 1900 psi pump working pressure.
10 or 12 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
Industrial strength fully welded stainless steel wall mount frame with fully enclosed stainless steel cover / sides.
Pressure switch con�guration for timer stop activation.*
Brass ‘Y’ stainless steel water inlet strainer.
Thermal valve for by-pass protection.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
High pressure hose quick release coupling system.
8m long power supply lead with 10 amp single phase plug.
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Hour Meter for Usage and Service Tracking.
Stainless Steel Supply and By-Pass Water Tank for Pump Protection with Quality Float Valve.
Stainless Steel Floor Mount Unit Stand.
Wall Mounting Kit.
Timer Stop Shutdown Protection.* ADD TS TO PRODUCT
CODE.
Optional Extra Accessories
Cadet Junior Wall Mount
11 10
8 9
MODEL
Cadet Junior Wall Mount100
PRODUCT CODE
CW100-12WM
PUMP
InterpumpW112(Series 44)
WORKING PRESSURE PSI BAR
1500 100
FLOW RATE L/PM
12
ELECTRIC MOTORKW / IPHz / VOLT / POLE / PHASE
Nicolini Coupling Drive3.2KW / IP5550Hz / 240v / 4 / Single
RPM
1450
APPROX WEIGHT (UNIT ONLY)
53kg
MACHINE DIMENSIONS
1100mm (L) x 560mm (W) x 410mm (H)
BOXED DIMENSIONS
1110mm (L) x 570mm (W) x 420mm (H)
Cadet Junior Wall Mount130
CW130-10WM
InterpumpW130(Series 44)
1900 130 10 Nicolini Coupling Drive3.2KW / IP5550Hz / 240v / 4 / Single
1450 53kg 1100mm (L) x 560mm (W) x 410mm (H)
1110mm (L) x 570mm (W) x 420mm (H)
MAX INLETTEMP
1
2
3
4
5
7
8
6
9
1
22 3
8
4
6
7
5
9
* FEATURE PRESENT ONLY ON TIMER STOP MODELS.
60°C
60°C
CADET WALL MOUNT 130
Page 34
Quality Assured IP66 24 volt low voltage electrical control box for increased safety and protection against dust and water ingress.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Timer stop shutdown protection for machine protection.
Corrosion proof stainless steel frame.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Quality Italian Nicolini & C. double �ange electric motor. > Totally enclosed fan cooled motor with black epoxy powder coated �nish to combat environmental corrosion. > IP55 degree of protection rating against dust and water ingress with an 86-87% ef�ciency rating. > Aluminium casing construction and zinc steel fan cover. > Thermal protection within motor incorporating Bimetal, PTC thermistor and PT100 devices. > Enclosed rigid radial type pre-lubricated ball bearings. > Class F winding insulation with class H double layer enamel insulated copper wire. > Mechanically and electrically sound to operate from -20˚C up to 40˚C at 95% or lower humidity level.
Two-bearing motor soft coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Bulletproof and robust wall mount frame construction.
Cadet Wall MountTimer Stop with 24 Volt Control Voltage
Frequent Usage
Electric Powered
Cold Water
NEW & IMPROVED
24 volt Control Voltage
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 35
Standard Speci�cations and Features
2320 to 3600 psi pump working pressure.
15 to 21 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Industrial strength fully welded stainless steel wall mount frame with fully enclosed stainless steel cover / sides.
Pressure switch con�guration for timer stop activation.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Thermal valve for by-pass protection.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure hose quick release coupling system.
8m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Hour Meter for Usage and Service Tracking.
Stainless Steel Supply and By-Pass Water Tank for Pump Protection with Quality Float Valve.
Stainless Steel Floor Mount Unit Stand.
Wall Mounting Kit.
Optional Extra Accessories
1
22 3
8
10
4
6
7
5
1
2
3
4
5
7
8
6
9
9
10
11
MODEL
Cadet WallMount200-15
PRODUCT CODE
CW200-15WM24
PUMP
InterpumpWS201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
RPM
1450
APPROX WEIGHT (UNIT ONLY)
110kg
MACHINE DIMENSIONS
1100mm (L) x 560mm (W) x 410mm (H)
BOXED DIMENSIONS
1110mm (L) x 570mm (W) x 420mm (H)
Cadet WallMount200-21
CW200-21WM24
InterpumpWS202(Series 47)
3000 200 21 1450 120kg 1100mm (L) x 560mm (W) x 410mm (H)
1110mm (L) x 570mm (W) x 420mm (H)
MAX INLETTEMP
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE
Nicolini7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three
Nicolini10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three
60°C
60°C
CADET WALL MOUNT 200-21LV
Cadet Wall Mount 160
CW160-18WM24
InterpumpWS162(Series 47)
2320 160 18 Nicolini7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three
1450 135kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
60°C
Cadet Wall Mount 250
CW250-15WM24
InterpumpWS251(Series 47)
3600 250 15 1450 140kg 1100mm (L) x 770mm (W) x 720mm (H)
1110mm (L) x 560mm (W) x 650mm (H)
Nicolini10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three
60°C
Cadet Wall Mount Timer Stop with 24 volt Control Voltage
Page 36
Frequent Usage
Electric Powered
Cold Water
Cadet High Temperature Wall Mount Timer Stop with 24 Volt Control Voltage
NEW & IMPROVED
HIGH TEMPERATURE
24 volt Control Voltage
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase Standout Features and Bene�ts
Up to 85˚C* inlet high temperature pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Quality Italian Nicolini & C. double �ange electric motor. > Totally enclosed fan cooled motor with black epoxy powder coated �nish to combat environmental corrosion. > IP55 degree of protection rating against dust and water ingress with an 86-87% ef�ciency rating. > Aluminium casing construction and zinc steel fan cover. > Thermal protection within motor incorporating Bimetal, PTC thermistor and PT100 devices. > Enclosed rigid radial type pre-lubricated ball bearings. > Class F winding insulation with class H double layer enamel insulated copper wire. > Mechanically and electrically sound to operate from -20˚C up to 40˚C at 95% or lower humidity level.
Two-bearing motor soft coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Bulletproof and robust wall mount frame construction.
Quality assured IP66 steel powder coated 24 volt low voltage electrical control box for protection against dust and water ingress.
Solid brass adjustable unloader valve for increased safety and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Timer stop shutdown protection for machine protection.
Corrosion proof stainless steel frame.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Page 37
Standard Speci�cations and Features
2320 psi pump working pressure.
18 or 23 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Industrial strength fully welded stainless steel wall mount frame with fully enclosed stainless steel cover / sides.
Pressure switch con�guration for timer stop activation.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure hose quick release coupling system.
8m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
MAXIMUM INLET TEMPERATURE DROPS TO 75°C DUE TO PRESSURE SWITCH LIMITATIONS.
1
22 3
8
10
4
6
7
5
9
11 10 8 9
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATEL/PM
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Cadet Wall Mount HT160-18
CW160-18WMHT24
InterpumpHT4718(47.HT Series)
2320 160 18 Nicolini7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three
1450 110kg 1100mm (L) x 560mm (W) x 410mm (H)
1110mm (L) x 570mm (W) x 420mm (H)
MAX INLETTEMP
Cadet Wall Mount HT160-23
CW160-23WMHT24
InterpumpHT4723(47.HT Series)
2320 160 23 Nicolini10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three
1450 120kg 1100mm (L) x 560mm (W) x 410mm (H)
1110mm (L) x 570mm (W) x 420mm (H)
85°C
85°C
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Hour Meter for Usage and Service Tracking.
Stainless Steel Supply and By-Pass Water Tank for Pump Protection with Quality Float Valve.
Stainless Steel Floor Mount Unit Stand.
Wall Mounting Kit.
Optional Extra Accessories
1
2
3
4
5
7
8
6
9
10
Cadet Wall Mount HT Timer Stop with 24 volt Control Voltage
Page 38
Cadet 4 x Multi User Wash Pad
Frequent Usage
Electric Powered
Standout Features and Bene�ts
Purpose built for wash bay / pad mounting arrangements capable of supporting four (4) operators.
4 x pumps supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
4 x quality Italian Nicolini & C. double �ange electric motors. > Totally enclosed fan cooled motor with black epoxy powder coated �nish to combat environmental corrosion. > IP55 degree of protection rating against dust and water ingress with an 86-87% ef�ciency rating. > Aluminium casing construction and zinc steel fan cover. > Thermal protection within motor incorporating Bimetal, PTC thermistor and PT100 devices. > Enclosed rigid radial type pre-lubricated ball bearings. > Class F winding insulation with Class H double layer enamel insulated copper wire.
Two-bearing motor soft coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Bulletproof robust wash pad mount frame construction.
Quality Assured compliant IP66 steel powder coated 24 volt low voltage electrical control box with insulated protected wire, illuminated operation lights for increased safety and protection against dust and water ingress.
Plug & play electronics for easier part removal, maintenance, repairs and convenient retro�t safety.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Optional high temperature (85˚C inlet) pumps available.
Galvanised or stainless steel frame cladding available.
Standard Accessories Include
4 x 10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
4 x ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
4 x stainless steel dual lance with variable pressure control complete with nozzles.
Cold Water
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 39
Standard Speci�cations and Features
3000 psi pump working pressure.
15 or 21 litres per minute water �ow rate.
Featuring individual trigger start and trigger total stop activation for unit longevity and operator convenience.
Plug & play electronics for motor(s) and associated componentry seamlessly integrated for easier part removal, maintenance, repairs and additional retro�t safety.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pumps, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Industrial strength fully welded and hot dipped galvanised wash pad mount frame with fully enclosed galvanised cladded sides (stainless steel cladding also available).
Safety emergency stop shutdown button.
Solid brass adjustable unloader valves for increased unit longevity and easier serviceability.
Pressure switch con�guration for total stop activation.
Large capacity stainless steel supply and by-pass water tank for pump protection with quality �oat valve.
Low level water shutdown protection.
4 x durable stainless steel pressure gauge with glycerine.
4 x brass ‘Y’ stainless steel water inlet strainer.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s) on each lance. High pressure hose quick release coupling system.
Motor protected by thermal overload.
Complete with safety precaution, attention, usage decals and operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
Hour Meter for Usage and Service Tracking.
Optional Extra Accessories
1
2
3
4
5
6
15
3
4
6
2
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATEL/PM
ELECTRIC MOTOR HP / KW / AMP / IPHz / VOLT / POLE / PHASE
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
MAX INLETTEMP
Cadet 4 x Multi User Wash Pad 200-15
CW200-15CPX4
InterpumpWS201(Series 47)
3000 200 15 1450 600kg 2200mm (L) x 1400mm (W) x 1000mm (H)
Nicolini 7.5HP / 5.5KW / 11.7AMP / IP5550Hz / 415v / 4 / Three
Cadet 4 x Multi User Wash Pad 200-21
CW200-21CPX4
InterpumpWS202(Series 47)
3000 200 21 Nicolini 10HP / 7.35KW / 14.7AMP / IP5550Hz / 415v / 4 / Three
1450 650kg 2200mm (L) x 1400mm (W) x 1000mm (H)
Cadet 4 x Multi User Wash Pad
60°C
60°C
Page 40Page 40
Cold Water Petrol Driven
Page 41
Why buy a cold water petrol driven high pressure water cleaner?
Pump Life
Direct Drive Gear Drive
Our range of cold water petrol high pressure water cleaners are researched, developed and manufactured speci�cally for high end industries such as civil construction, government and councils, and cleaning contractors incorporating leading brands Honda and Briggs & Stratton.
The bene�ts of our petrol range are unit mobility, cost effectiveness, high
performance, technologically advanced, and economical resulting in saved time and money.
Our petrol range also encompasses a semi-professional line for less frequent usage. This ideal for smaller jobs such as vehicle cleaning, household maintenance and small to medium farming equipment wash down.
Direct Drive Pressure WashersA direct drive pump has a hollow shaft, which simply slides onto the drive shaft of an engine and the �ange on this pump is mounted to the face of the engine. The pump spins at the same speed as the engine-typically 3,600 rpm. This system
has the advantage of being simple, with few moving parts and is therefore less expensive. The disadvantage is the pump spins as much as the engine therefore the bearing get more wear and tear reducing the life span of the pump.
Gear Drive Pressure Washers
Life Comparison Chart
The pump life chart is a rough guide comparing the different drive systems based upon how much the pump spins over the life of the unit. All other things being equal the slower the pump spins, the longer the pump will last due to bearing life and wear and tear on internal parts.
Gear drive units use a gear reduction system installed between the engine and the pump. Gear box installation will not only keep the heat transfer down, but also make the pump turn at half the speed, which will result in a longer life of the pump bearings and seals. Compared with the belt drive system, the gear
drive unit is more compact and has less ef�ciency loss. This consequently makes such machines more industrial and allows the pump to run continuously, without the risk of spinning off a belt and the ongoing concern of more maintenance to adjust the belts.
Page 42
Raptor JnrSemi-Frequent
Usage
Petrol Powered
Sem
i-Pr
ofes
sion
al /
Petr
ol D
riven
Cold Water
Standout Features and Bene�ts
Genuine Honda GP200 or GX200 petrol engine.
> Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> OHV design for increased ef�ciency and optimal power transfer.
> Integrated low level oil cut-out protection system.
> Automatic mechanical de-compression system.
> Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel ef�ciency.
Up to 6 x more abrasion resistant and anti-kink dual braid non marking hose.
Formed steel hi-viz cover to safeguard the heart of your investment and for worksite safety.
Telescopic soft grip handle for comfort and compactness.
Professional Italian triplex Interpump pump delivers performance and longer life.
Modular precision heavy gauge, zinc steel chassis.
Trolley con�guration with tie down points.
6 x anti-vibration protection for quieter performance.
Innovative anti-corrosion nylon bearings and puncture proof tyres.
Standard Accessories Include
15m of 3/8” translucent steel dual braided hose with quick coupling.
Industrial duty spray gun with back part lance and quick coupling.
Stainless steel dual lance with variable pressure control complete with nozzle.
NEW AND
EXCITING!
Page 43
Complete ‘Turbo’ Head with Lance.
Extension High Pressure Hose w M22 Adaptor.
Foaming Lance with Tank.
Hose Reel (capacity 30m) including leader hose.
Dial N’ Wash Coupler.
Sludge Kit.
Four Wheel Push Cart Kit.
Sandblasting Kit.
20” Hammerhead ABS Whirlaway.
Telescopic Lance.
Top Lifting Lug.
Auto Speed.
On-board 5L Detergent Bottle Cradle.
Engine Hour Meter for service tracking.
Standard Speci�cations and Features
2320 to 3000 psi pump working pressure.
11 or 12 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and/or nickel plated head with easy oil indication sight glass.
Thermal valve to prevent overheating on excessive packing wear.
Brass washable / viewable inlet water �lter.
Dual M22 screw hose coupling system.
0-30° variable spray patterns.
Integrated accessory storage for hose, gun and lance.
Complete operator and maintenance manuals, including detergent tubing and chemical �lter.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX Engine Warranty.
Raptor Jnr
Optional Extra Accessories
1
2
3
4
5
7
8
6
9
11 10 8 9
MODEL
Raptor Jnr
PRODUCT CODE
CW3000-11P
PUMP
InterpumpEVO1 (Series 53)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATE L/PM
11
PETROL ENGINE
HondaGP2006.5HP
RPM
3400
APPROX WEIGHT (UNIT ONLY)
44kg
MACHINE DIMENSIONS
700mm (L) x 600mm (W) x 920mm (H)
BOXED DIMENSIONS
640mm (L) x 600mm (W) x 580mm (H)
Raptor Jnr X
CW3000-11PX InterpumpEVO1 (Series 53)
3000 200 11 HondaGX2006.5HP
3400 44kg 700mm (L) x 600mm (W) x 920mm (H)
640mm (L) x 600mm (W) x 580mm (H)
Pro Raptor Jnr
CW2320-12PX InterpumpEVO1 (Series 53)
2320 160 12 HondaGX20013HP
1450 44kg 700mm (L) x 600mm (W) x 920mm (H)
640mm (L) x 600mm (W) x 580mm (H)
MAX INLETTEMP
60°C
60°C
60°C
UNLOADERVALVE
Integral
Integral
Banjo
1
2
3
4
5
7
8
6
9
6
9
8
Page 44
HustlerSemi-Frequent
Usage
Petrol Powered
Sem
i-Pr
ofes
sion
al /
Petr
ol D
riven
Cold Water
Standout Features and Bene�ts
Genuine Honda GX200 or GX390 petrol engine.
> Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> OHV design for increased ef�ciency and optimal power transfer.
> Integrated low level oil cut-out protection system.
> Automatic mechanical de-compression system.
> Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel ef�ciency.
Tough and robust welded hot dipped galvanised frame with convenient gun and lance holder with removable handle.
Strong upheld unit design based around longevity, easier maintenance schedule and improved cleaning effectiveness and ef�ciency.
Quality unparalleled industry proven ‘Italian’ pump.
Bulletproof construction, built with only recognised quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for cleaning �exibility.
Specialised galvanised motor anti-vibration tray control technology to eliminate frame distortion and/or damage.*
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles* or multi-regulated nozzle.
Page 45
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
‘LS12’ Foaming Lance.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
‘Vario’ Adjustable Fan Nozzle with Stainless Steel Lance.
Stainless Steel Snap-on Fittings.
‘TS8’ Complete Sandblaster Lance.
Engine Hour Meter & Tachometer for Service Tracking.
Standard Speci�cations and Features
2200 to 4000 psi pump working pressure.
11 to 15 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and/or nickel plated head with easy oil indication sight glass.
Thermal valve for by-pass protection.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure.
10” - 14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.**
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.*
Complete operator and maintenance manuals, including detergent tubing and chemical �lter.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX Engine Warranty.
Hustler
Optional Extra Accessories
1
2
3
4
5
7
8
6
9
10
11
11 10 8 9
MODEL
Hustler140
PRODUCT CODE
HP140-13P
PUMP
InterpumpTT1513(Series 51)
WORKING PRESSURE PSI BAR
2200 150
FLOW RATE L/PM
13
PETROL ENGINE
HondaGX2006.5HP
RPM
3400
APPROX WEIGHT (UNIT ONLY)
34kg
MACHINE DIMENSIONS
740mm (L) x 580mm (W) x 920mm (H)
BOXED DIMENSIONS
640mm (L) x 600mm (W) x 580mm (H)
Hustler200
HP200-11P InterpumpE1E1811CV(Evolution 1)
3000 200 11 HondaGX2006.5HP
3400 42kg 700mm (L) x 600mm (W) x 920mm (H)
640mm (L) x 600mm (W) x 580mm (H)
Hustler965
HP965-15P or HP965-15PE
InterpumpWW965(Series 44)
3600 250 15 HondaGX39013HP
3400 74kg 1010mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
Hustler270
HP270-15P orHP270-15PE
InterpumpE2E2815(Evolution 2)
4000 275 15 HondaGX39013HP
3400 72kg 1010mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
MAX INLETTEMP
60°C
60°C
60°C
60°C
UNLOADERVALVE
Integral
Integral
IntegralZK1
Integral
1
2
3
45
7
86
9
1011
* FEATURE PRESENT ONLY ON HUSTLER 965 AND UPWARDS.
** FEATURE PRESENT ONLY ON HUSTLER MODEL 965.
HUSTLER 270
Page 46
Frequent Usage
Petrol Powered
Petrol
Cold Water
HornetStandout Features and Bene�ts
Genuine Honda GX200 or GX390 petrol engine. > Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> OHV design for increased ef�ciency and optimal power transfer.
> Integrated low level oil cut-out protection system.
> Automatic mechanical de-compression system.
> Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel ef�ciency.
> Optional iGX electric start engine upgrade available on selected models.*
Tough and robust fully welded hot dipped galvanised roll frame with convenient gun and lance holder.
Strong upheld unit design based around longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Quality unparalleled industry proven ‘Italian’ pump and gearbox components.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.*
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised galvanised motor anti-vibration tray control technology to eliminate frame distortion and/or damage.*
Standard Accessories Included
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Prof
essi
onal
/ Pe
trol
Driv
en
NEW Evolution
Models Now Available
NEW Evolution
Models Now AvailableAvailable
NEW MODELS COMING SOON!
Page 47
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX Engine Warranty.
Standard Speci�cations and Features
2300 to 4000 psi pump working pressure.
12 to 21 litres per minute water �ow rate.
Optional Honda iGX390 electric start engine upgrade with additional features including:
> Automatic intelligent throttle and automatic choke.
> Built-in hour meter and low level oil indicator light.
> Resilient maintenance free battery with charge indicator and heavy duty looms.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with easy oil indication sight glass.
1450 rpm low pump running speed via a directly coupled 2:1 reduction gearbox with easy oil indication sight glass.
Thermal valve for by-pass pump protection.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure.
10” - 14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.*
Complete operator and maintenance manuals, including detergent tubing and chemical �lter.
Hornet
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
‘LS12’ Foaming Lance.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
‘Vario’ Adjustable Fan Nozzle with Stainless Steel Lance.
Stainless Steel Snap-on Fittings.
‘TS8’ Complete Sandblaster Lance.
Engine Hour Meter and Tachometer for Service Tracking.
Optional Stainless Steel Water Tank on selected models.
Foam Filled Puncture Proof Wheels. NOT AVAILABLE ON
HORNET 160 MODEL.
Optional Extra Accessories
1
2
3
4
5
7
8
6
9
10
11
MODEL
Hornet 160
PRODUCT CODE
HP160-12P
PUMP
InterpumpE1E1612
WORKING PRESSURE PSI BAR
2300 160
FLOW RATE L/PM
12
PETROL ENGINE
Honda GX2006.5HP
APPROX WEIGHT (UNIT ONLY)
42kg
MACHINE DIMENSIONS
700mm (L) x 610mm (W) x 920mm (H)
BOXED DIMENSIONS
640mm (L) x 600mm (W) x 580mm (H)
Hornet 201
HP201-15PorHP201-15PE
InterpumpWS201(Series 47)
3000 200 15 Honda GX39013HP
80kg 1110mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
Hornet 202
HP202-21PE InterpumpWS202(Series 47)
3000 200 21 Honda iGX39013HP
84kg 1110mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
Hornet 251
HP251-15PorHP251-15PE
InterpumpWS251(Series 47)
3600 250 15 Honda GX39013HP
80kg 1110mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
Hornet 275
HP275-15PorHP275-15PE
Annovi Reverberi(AR) RK15.28(Series 228)
4000 275 15 Honda GX39013HP
78kg 1110mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
MAX INLETTEMP
60°C
60°C
60°C
60°C
60°C
ELECTRIC START AVAILABLE
No
Yes
Standard
Yes
Yes
RPM
1450 via Interpump RS99 Gearbox
1450 via InterpumpRS500 Gearbox
1450 via Interpump RS500 Gearbox
1450 via Interpump RS500 Gearbox
1450 via AR 1698 Gearbox
1
2
3
45
7
86
9
1011
* FEATURE PRESENT ONLY ON HORNET MODEL 201 AND UPWARDS.
HORNET 251
Page 48
Frequent Usage
Petrol Powered
Petrol
Cold Water
SenatorStandout Features and Bene�ts
Genuine Honda GX630 or GX690 electric start petrol V-Twin engine.
> Offers higher horsepower, quiet operation and greater fuel ef�ciency.
> Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> Digital CDI ignition system with variable timing.
> Rev limiter to protect against damage from over revving.
> Built-in hour meter and low level oil indicator light for easy service tracking.
> Integrated low level oil cut-out protection system.
> Automatic mechanical de-compression system. > High ef�ciency 36 blade cooling fan.
Tough and robust fully welded hot dipped galvanised roll frame with convenient gun and lance holder.
Strong upheld unit design based around longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Quality unparalleled industry proven ‘Italian’ pump and gearbox.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised ‘long’ galvanised motor anti-vibration tray control technology to eliminate frame distortion and / or damage.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel lance complete with soft trigger spray gun.**
SHOWN WITH OPTIONAL STAINLESS STEEL WATER TANK.
Prof
essi
onal
/ Pe
trol
Driv
en
Page 49
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30 or 60m Capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22”* and / or 30” Rotary FloorCleaner.**
Stainless Steel Snap-on Fittings.
Sandblasting Kits.
Lances of Different Lengths.
Optional Stainless Steel Water Tank. SEE MAIN PICTURE
Stainless Steel Fuel Tank.
Foam Filled Puncture Proof Wheels.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX engine warranty.
Standard Speci�cations and Features
3600 to 5800 psi pump working pressure.
18 to 26 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with oil indication sight glass.
1450 rpm low pump running speed via a directly coupled 2:1 reduction gearbox with easy oil indication sight glass.
Maintenance free battery with charge indicator and heavy duty looms.
Extra support via pump mounts.
High pressure back up safety relief valve.**
Thermal valve for by-pass pump protection (not required if tank �tted).
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and chemical �lter.*
14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.
20 litre plastic fuel tank.
Skid mount options available on request.
Complete operator and maintenance manuals.
Senator
Optional Extra Accessories
1
2
3
4
5
7
6
1
2
3
4
5
7
6
MODEL
Senator280-21
PRODUCT CODE
HP280-21PE
PUMP WORKING PRESSURE PSI BAR
4350 300
FLOW RATE L/PM
21
PETROL ENGINE
Honda GX630
APPROX WEIGHT (UNIT ONLY)
160kg
MACHINE DIMENSIONS
1120mm (L) x 700mm (W) x 900mm (H)
BOXED DIMENSIONS
1100mm (L) x 600mm (W) x 820mm (H)
Senator280-26
HP280-26PE Annovi Reverberi(AR) XW 26.28(Series 194)
4060 280 26 Honda GX690 160kg 1120mm (L) x 700mm (W) x 900mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
Senator350-21
HP350-21PE Annovi Reverberi(AR) SXW 21.35(Series 194)
5100 350 21 Honda GX690 160kg 1120mm (L) x 700mm (W) x 900mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
MAX INLETTEMP
60°C
60°C
60°C
RPM
1450 via Interpump RS500 Gearbox
1450 via Interpump RS500 Gearbox
1450 via Interpump RS500 Gearbox
Senator350-23
HP350-23PE InterpumpW3523(66 HP Series)
5075 350 23 Honda GX690 170kg 1120mm (L) x 700mm (W) x 900mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
60°C 1450 via InterpumpRS500 Gearbox
Senator400
HP400-18PE InterpumpW4018(66 HP Series)
5800 400 18 Honda GX690 170kg 1120mm (L) x 700mm (W) x 900mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
60°C 1450 via Interpump RS500 Gearbox
* FEATURE PRESENT ONLY ON SENATOR MODEL 280.
** FEATURE PRESENT ONLY ON SENATOR MODEL 350.
SENATOR 350
Senator252
HP252-21PE InterpumpWS252(47 HP Series)
3600 250 21 Honda GX630 160kg 1120mm (L) x 700mm (W) x 900mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
60°C 1450 via Interpump RS500 Gearbox
InterpumpW3021(66 HP Series)
Page 50
Frequent Usage
Petrol Powered
Cold Water
SenatorStandout Features and Bene�ts
Briggs & Stratton Vanguard 27, 31 or 35 hp H/S Air Cooled V-Twin BIG BLOCK Horizontal Shaft engine.
> Innovative intake and exhaust system results in a quieter-running engine.
> Advanced Debris Management System features an easy clean access and allows the engine to run cooler and cleaner, which prolongs engine life.
> Foam pre-cleaner prevents clogging.
> 5 inch cyclonic industrial Donaldson air �lter.
> Full pressure lubrication with spin-on oil �lter.
> Dual ball bearing supported crankshaft.
> Industrial-grade solenoid shift starter.
> Flange mounted bolt circle.
Tough and robust fully welded hot dipped galvanised roll frame with convenient gun and lance holder.
Strong upheld unit design based around longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Quality unparalleled industry proven ‘Italian’ pump and gearbox.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised ‘long’ galvanised motor anti-vibration tray control technology to eliminate frame distortion and / or damage.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
SHOWN WITH OPTIONAL STAINLESS STEEL WATER TANK.
Prof
essi
onal
/ Pe
trol
Driv
en
Page 51
Senator Standard Speci�cations and Features
3045 to 7250 psi pump working pressure.
18 to 41 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger
pump.
1450 / 1750 rpm pump speed via directly coupled 2:1
reduction gearbox with oil indication sight glass.
Maintenance free battery with charge indicator and
heavy duty looms.
Extra support via pump mounts.
Thermal valve for by-pass pump protection (not required
if tank �tted).
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure
complete with detergent tubing and chemical �lter.
14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German stainless steel high pressure nozzle.
20 litre plastic fuel tank.
Skid mount options available on request.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Briggs & Stratton 3 year global commercial engine
warranty.
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30 or 60m Capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” and/or 30” Rotary Floor Cleaner.*
Stainless Steel Snap-on Fittings.
Sandblasting Kits.
Lances of Different Lengths.
Optional Stainless Steel Water Tank. SEE MAIN PICTURE
Stainless Steel Fuel Tank.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
2
3
4
5
7
6
1
2
3
45
7
6
11 10 8 9
MODEL
Senator250#
PRODUCT CODE
HP250-35PEB
PUMP
InterpumpT2535(66 HP Series)
WORKING PRESSURE PSI BAR
3600 250
FLOW RATE L/PM
35
PETROL ENGINE
Briggs & Stratton27HP
APPROX WEIGHT (UNIT ONLY)
170kg
MACHINE DIMENSIONS
1200mm (L) x 720mm (W) x 920mm (H)
BOXED DIMENSIONS
1100mm (L) x 600mm (W) x 820mm (H)
Senator275
HP275-30PEB InterpumpT2830(66 HP Series)
4000 275 30 Briggs & Stratton27HP
160kg 1200mm (L) x 720mm (W) x 920mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
MAX INLETTEMP
60°C
60°C
RPM
1750 via Interpump RS500 Gearbox
1750 via Interpump RS500 Gearbox
Senator500
HP500-18PEB InterpumpW5018(66 HP Series)
7250 500 18 Briggs & Stratton35HP
170kg 1180mm (L) x 720mm (W) x 920mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
60°C 1450 via InterpumpRS500 Gearbox
# PROVISION MUST BE MADE FOR AN EXTERNAL WATER SUPPLY SOURCE MIN 100L.
Senator210#
HP210-41PEB InterpumpW2141(66 HP Series)
3045 210 41 Briggs & Stratton31HP
160kg 1200mm (L) x 720mm (W) x 920mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
60°C 1450 via Interpump RS500 Gearbox
Page 52Page 52
Cold Water Diesel Driven
Page 53
Why buy a cold water diesel driven high pressure water cleaner?Jetwave’s professional cold water diesel high pressure water cleaners powered by Yanmar are cutting edge with con�gurations such as trolley frame, skid or trailer mount options.
The bene�ts of our diesel range are on-site compliance and convenience, outstanding performance in hot weather conditions, increased safety and fuel ef�ciency resulting in lower maintenance and running costs.
The Bene�ts of Cold Water
Cold water pressure cleaners can be used to successfully clean many objects and surfaces through a combination of high pressure water spray and the application of cleaning chemicals.
They are perfect for cleaning large surfaces and removing / blasting stubborn dirt from walls, machinery, buildings and vehicles on daily basis. Our range of accessories will maximise the cleaning potential of a cold water high pressure water cleaner.
Running the pressure washer without water
Normally this will destroy the pressure washer within minutes.
Running the pressure washer in extended by-pass
By-pass is when the pressure washer is on and the trigger is off the water is recirculating inside the pump manifold. As a consequence the water temperature builds as time progresses. Do not let the machine run for more than 5 minutes in by-pass mode as the heat will build up. The pressure washer must be turned off after operation is complete.
Cavitation Cavitation is caused by air getting into your pump. The air can damage your pump as it rapidly expands and contracts. The �rst sign of cavitation is loss of pressure and a hammering noise. The cause of cavitation is a lack of water getting into the system. The suction due to a lack of water will pull in air and cause cavitation. The only solution to cavitation is to feed your pump the required amount of water and to make sure there are no leaks in the water inlet system.
No lubrication or lack of lubrication
High pressure pumps, like gasoline engines, require oil to lubricate transmission mechanism, the crankshaft, connecting rod and plungers. The oil is needed to keep the pump parts cool and turning freely. No oil and low oil will cause permanent damage to the pump. When oil leaks out, or water gets into the pump oil, the pump parts will overheat and begin to break apart. Always check your oil level and maintain the correct amount and type of oil in the pump to prevent damage.
All pressure washers are high maintenance machines. High pressure water and the corresponding friction will eventually wear out seals, o-rings, springs, and other parts. To schedule regular maintenance services and replace seals, valves, and o-rings as well
Common Operator Errors
as changing the oil(s) as part of a routine maintenance program is paramount and will prolong the life of the unit. However, the most common cause of excessive maintenance cost is operator error as highlighted below.
Page 54
Frequent Usage
Diesel Powered
Cold Water
Hornet Diesel RangeDiesel
Standout Features and Bene�ts
Yanmar L48 or L100 diesel air-cooled engine.
> Factory �tted solenoid for energised key start and key stop operation.*
> Low vibration and low noise levels leading to improved operator comfort.
> Proprietary direct injection technology, resulting in lower fuel consumption and running costs.
> Easy viewable fuel tank gauge for extra convenience.
> Effortless electric start with assisted auto-run decompressor.*
Robust fully welded and hot dipped galvanised roll frame with convenient gun and lance holder.
Revolutionary design based around unit longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Built with only recognised quality components supported by world-wide spare parts back-up.
Quality unparalleled industry proven ‘Italian’ pump, gearbox and components.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and workability.
Professional low pump running speed via gearbox reduction; 50% less maintenance time.
Specialised long galvanised motor anti-vibration technology integrating six tray dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion and / or damage.*
Standard Accessories Included
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Prof
essi
onal
/ Di
esel
Driv
en
Page 55
*Optional Mine Compliance and Speci�cations Kit
Enquire for details and to discuss speci�c requirements.
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘TS8’ Complete Sandblaster Lance.
Safety Emergency Shutdown Button*.
Heavy Duty Battery Isolator Lockout Switch.*
Heavy Duty Starter Isolator Lockout Switch.*
Engine Hour Meter and Tachometer for Service Tracking.
Stainless Steel By-pass Water Tank.
Fitted Fire Extinguisher.*
Battery Cover.*
Foam Filled Puncture Proof Wheels.
Standard Speci�cations and Features
2320 or 3000 psi pump working pressure.
12 or 15 litres per minute water �ow rate.
Easy electric start motor with back up pull start.*
Superior resilient maintenance free and charge indicator battery and heavy duty looms.*
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless valves and full nickel plated head with easy oil indication sight glass.
1450 rpm low pump running speed via a directly coupled 2:1 reduction gearbox with easy oil indication sight glass.
Thermal valve for by-pass pump protection.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel high pressure nozzle.
Complete operator and maintenance manuals, including detergent tubing and chemical �lter.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Yanmar 24 month or 2000 hours engine warranty. 24 MONTH ENGINE WARRANTY
Optional Extra Accessories
Hornet Diesel Range
12
3
4
5
7
8
6
9
10
11
1
2
3
4
5
7
8
6
9
11
10
MODEL
Hornet160d
PRODUCT CODE
HP160-12D
PUMP
InterpumpE1E1612
WORKING PRESSURE PSI BAR
2320 160
FLOW RATE L/PM
12
DIESEL ENGINE
Yanmar L484.8HP
APPROX WEIGHT (UNIT ONLY)
68kg
MACHINE DIMENSIONS
1010mm (L) x 700mm (W) x 860mm (H)
BOXED DIMENSIONS
970mm (L) x 600mm (W) x 670mm (H)
MAX INLETTEMP
60°C
RPM
1450 via InterpumpRS99 Gearbox
10
HORNET 201D
Hornet201d
HP201-15D InterpumpWS201 (Series 47)
3000 200 15 Yanmar L10010HP
125kg 1100mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
60°C 1450 via InterpumpRS500 Gearbox
* FEATURE PRESENT / AVAILABLE ONLY ON HORNET 201d.
Page 56
Frequent Usage
Diesel Powered
Cold Water
Diesel
Prof
essi
onal
/ Di
esel
Driv
en
Senator DieselStandout Features and Bene�ts
Quality Yanmar diesel electric start water cooled engine:
> InteliDrive Nano engine management system
- Electronic display.
- Engine push button start / stop delay to prevent overcranking.
- Automatic shut-off solenoid.
> Longer maintenance intervals, low vibration and low noise levels leading to improved operator comfort.
> Indirect injection technology, resulting in lower fuel consumption and running costs.
> Closed lubrication system with breather. > Low sensitivity to fuel quality and approved for operation on bidiesel concentrations of up to 20%.
Highest quality Interpump triplex ceramic piston plunger pumps.
Centa-Flex soft directly coupled pump/motor drive system (result engine running at half speed).
Solid brass pump head.
Low 1500 rpm direct motor and pump soft coupling system resulting in less moving parts for better reliability.
Durable stainless steel pressure gauge with glycerine.
Robust fully welded heavy duty hot dipped galvanised roll frame.
Vibration control and anti-vibration dampeners.
Integrated low level water engine shut-off for pump / unit protection.
Purpose built for Australian conditions.
Water �ltration including UV resistant, easy removable / cleanable heavy duty water cartage �lter and brass ‘Y’ stainless steel water inlet �lter.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard Accessories Include
20m of 3/8” double wire braid blue high pressure hose (includes quick release coupling).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
NEW MODEL
SHOWN WITH OPTIONAL TOP LIFTIING LUGS, HOSE REEL AND REEL PROTECTION BRACKET.
Page 57
Standard Speci�cations and Features
3000 to 7250 psi pump working pressure.
18 to 23 litres per minute water �ow rate.
Integrated safety emergency stop shut-down button.
Resilient heavy duty maintenance free battery with heavy duty looms enclosed in protective battery box.
Adjustable unloader valve.
60 litre stainless steel diesel tank.
Control panel includes: engine RPM, engine timer, battery voltage indicator, engine hour meter, pump pressure cut-out, low water / low oil indicators.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
Washable cartridge �lter.
Screw quick release coupling system for operator convenience.
Safety decals including safety precautions instructions, attention and caution labelling.
Complete operator and maintenance manuals.
Warranty
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY
Yanmar 24 month or 2000 hours engine warranty. 24 MONTH ENGINE WARRANTY
Senator Diesel Range
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
4 x Top Lifting Lugs for Transportation via Crane.
Optional Extra Accessories
MODEL
Senator Diesel 500
PRODUCT CODE
HP500-18D
PUMP
InterpumpW5018(Series 47)
WORKING PRESSURE PSI BAR
7250 500
FLOW RATE L/PM
18
DIESEL ENGINE YANMAR
4 Cylinder4TNV32.7HP
APPROX WEIGHT (UNIT ONLY)
730kg
MACHINE DIMENSIONS
1500mm (L) x 750mm (W) x 1200mm (H)
RPM
1500
Senator Diesel 201
HP201-21D InterpumpWS202(Series 47)
3000 210 21 3 Cylinder3TNV22.3HP
680kg 1500mm (L) x 750mm (W) x 1200mm (H)
1500
Senator Diesel 280
HP280-21D 4350 300 21 3 Cylinder3TNV31HP
680kg 1500mm (L) x 750mm (W) x 1200mm (H)
1500
Senator Diesel 350
HP350-23D InterpumpW3523(Series 47)
5100 350 23 4 Cylinder4TNV32.7HP
680kg 1500mm (L) x 750mm (W) x 1200mm (H)
1500
DIESEL TANK CAPACITY
60L
60L
60L
60L
WATERTANKCAPACITY
60L
60L
60L
60L
InterpumpW3021(Series 66)
Page 58
Frequent Usage
Diesel Powered
Cold Water
Diesel
Prof
essi
onal
/ Di
esel
Driv
en
Hornet Diesel ScoutStandout Features and Bene�ts
3000 psi pump working pressure.
15 litres per minute water �ow rate.
Quality Yanmar L100 (10 hp) diesel air-cooled electric start engine or Kohler KD15-440: > Factory �tted solenoid for energised key start and key stop operation. > Low vibration and low noise levels leading to improved operator comfort. > Proprietary direct injection technology, resulting in lower running costs. > Easy viewable fuel tank gauge for extra convenience. > Effortless electric start with assisted auto-run decompressor.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and/or nickel plated head with easy oil indication sight glass.
Forged nickel plated solid brass pump head.
Matched Interpump RS500 2:1 reduction gearbox: > Resulting in 1450 rpm pump running speed and 50% less maintenance time.
Matched Interpump ZK1 “ZERO” line pressure solid brass adjustable unloader valve for increased safety and workability.
Durable stainless steel pressure gauge with glycerine.
Robust fully welded heavy duty hot dipped galvanised roll frame with integrated removable powder coated “Safety Yellow” protective guarding.
Vibration control protection, via specialised long galvanised motor anti-vibration tray, integrating six dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion.
1000 litre UV stabilised water cartage tank: > Integrated low level water engine shut-off for pump/unit protection. > Extra heavy duty impact resistant polyethylene construction. > Purpose built for Australian conditions. > Easy to read calibrations for measuring water content. > Spill containment lip surrounds the lid. > Includes water baf�e to prevent excess water sloshing and trailer imbalances.
Duel water �ltration including UV resistant, easy removable/cleanable heavy duty water cartage �lter and brass ‘Y’ stainless steel water inlet �lter.
One (1) x industrial hose reel �tted with 30m of Jetwave 3/8” double wire braid blue high pressure hose complete with screw type quick coupling.
FOR ILLUSTRATION PURPOSES ONLY.
Page 59
Standard Speci�cations and Features
One (1) x industrial hose reel �tted with 30m of ¾” low pressure water feed supply hose:
20m of 3/8” double wire braid blue high pressure hose (includes quick release coupling).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles. > Both reels feature multi-locking points for easy length selection and increased operator safety.
Heavy duty steel powder coated fully enclosed IP66 12 volt low voltage electrical control box to prevent dust and water ingress. > 12 volt twice over insulated protected wire.
Resilient heavy duty maintenance free battery with heavy duty looms enclosed in protective battery box.
Fitted engine exhaust spark arrestor.
Quality German made hardened stainless steel/brass high and low pressure nozzle(s).
Bunded oil tray for engine/pump.
Screw quick release coupling system for operator convenience.
Safety decals including safety precautions instructions, attention and caution labelling.
Twelve (12) months registration in South Australia.
Lockable front draw bar mounted aluminium tool/storage box.
Operating �ashing LED orange beacon light (includes loom, relay and on/off switch).
Two (2) 360® swivel LED night work lights (includes loom, relay and on/off switch).
Complete operator and maintenance manual.
Standard Accessories Include
30m of 3/8” double wire braid blue high pressure hose (includes quick release coupling).
30m of quality ¾” low pressure water feed supply hose (includes brass tap snap coupling).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Hornet Diesel Scout
Trailer Speci�cations and Features
Purpose built mining; hire and rental high pressure water cleaner trailer.
8’ x 5’ single axle galvanised �at deck with mudguards. One (1) lockable mounted aluminium tool / storage box.
Heavy duty folding jockey wheel.
Tough duragal RHS 100mm x 50mm x 3mm chassis construction.
Nine (9) leaf spring ‘outback’ slipper suspension.
Heavy duty 50mm square single axle with heavy duty bearings.
Load rated to 1999kg GTM.
Extra-long draw bar for smoother towing and additional storage capacity.
Two (2) adjustable drop-down rear stabiliser legs.
Rated safety chain.
Galvanised dimple sheeting.
Two (2) 8 ply light truck tyres with white powder coated steel rims.
One (1) drop down spare wheel.
Quality maintenance free LED rear lights.
Mechanical assisted disc brakes with manual handbrake.
Twelve (12) months registration.* (NB: This is at an additional cost and may be subject to change depending on the particular state/territory).
Safety Equipment
Operating instruction manual for risk assessments carried out under OH&S guidelines.*
One (1) x mounted 4.5kg ABE powder type �re extinguisher for A Class - Solids, B Class - Liquids and E Class - Electrical �res.
Page 60
24 MONTH ENGINE WARRANTY
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Additional High Pressure Hose; 3/8” Double Wire
Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
‘LS12 Foaming Lance.
Whirl-away 22” Rotary Floor Cleaner.
‘Vario’ Adjustable Fan Nozzle with Stainless Steel
Lance.
Stainless Steel Snap-on Fittings.
‘TS8’ Complete Sandblaster Lance.
Hour Meter for Usage and Service Tracking.
Lances of Different Lengths.
Optional Extra Accessories
MODEL
Diesel Scout
PRODUCT CODE
HP201-15DTM
PUMP
InterpumpWS201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATE L/PM
15
DIESEL ENGINE
Yanmar L484.8HP
APPROX DRY WEIGHT (UNIT ONLY)
600kg
MACHINE DIMENSIONS
1010mm (L) x 700mm (W) x 860mm (H)
MAX INLETTEMP
60°C
RPM
1450 via InterpumpRS500 Gearbox
Optional Extras
Integrated safety emergency stop shut-down button.
175 amp Anderson type plug battery jump start reciprocal.
Heavy duty starter (yellow) isolator switch.
Engine hour meter and tachometer for easy service tracking.
High visibility re�ective tape on edges (class 1).
Yellow loose wheel nut indicators.
Upgrade: Bosch extra heavy duty two (2) pole (active and earth) battery isolator lockout switch (MG15 Mine Compliant).
Additional Safety Pack Equipment pack: > PPE including: hard hats, hi-visibility vests, hazard cones, bunting, safety sign, �rst aid kit, earmuffs and eye protection.
*Optional Mine Compliance and Speci�cations Kit.
State and territory laws and company speci�c regulations will vary. Therefore it’s the client’s responsibility to correspond with the appropriate authorities to ensure all requirements are met. Enquire for details and to discuss speci�c needs and applicable provisions.
Warranty
24 month or 2000 hour Yanmar commercial engine warranty.
5 year Rapid Spray Australia wide water tank warranty.
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY.
1
2
34
5 7
8
6
9
10
1
2
3
4
5
7
8
6
9
10
WATER TANK CAPACITY
1000L
Page 61
Page 62Page 62
Hot Water Electric Driven
Page 63
Why buy a hot water electric driven high pressure water cleaner?
90°C20°CCleaning
ef�ciency
Cleaning time
Our range of hot water electric high pressure water cleaners have been designed to meet tough cleaning demands for speci�c needs of high end industries such as agriculture, mining, food processing, refrigerated storage, oil and gas, and many more cleaning and sanitizing tasks. Jetwave’s hot water high pressure cleaners will melt grease and grime, de-scale and disinfect surfaces. These units can also be factory �tted with an optional steam kit upon request.
Our electric motors are supplied by industry leaders, such as WEG and Nicolini & Co., which guarantee a seamless performance, even in the harshest operating conditions.
With the added advantage of our environmentally friendly fuel ef�cient vertical diesel �red burner system.
These units include user friendly methodical design, technologically advanced electrical control circuitry leading to increase safety, and lower maintenance and running costs. With the selection of units that are available within this product line, be assured that there will be a pressure washer to suit your cleaning needs that encapsulates quality and superior features.
Additionally, our semi-professional machines would be an asset to any small business or home user to use on a semi-frequent basis.
Hot Water Pressure Water Cleaner Bene�ts1. Better at removing grease, grime and oil
A hot water unit will spray hot water with great force and will not only remove the grease and grime from the surface, but will also soften it and make it easy to remove. The heat is the most important part of cleaning in the power washing procedure.
2. Faster cleaning
Using hot water can reduce cleaning times up to 40% and improve �nal results. This is because oil and grease stains emulsify and �ow more easily when heated; making them easier and quicker to shift. Hot water also accelerates chemical processes, making detergents work quicker. In addition, the object being cleaned will dry quicker because it is being warmed by hot water.
Page 64
Hynox 120Semi-Frequent Usage
Electric Powered
Sem
i-Pr
ofes
sion
al /
Elec
tric
Driv
en
Hot Water
Standout Features and Bene�ts
Quality pump supplied by an Italian manufacturer of high pressure piston plunger pumps - Annovi Reverberi (AR).
AISI430 highly ef�cient (>90%) and environmentally friendly V3 vertical diesel �red hot water burner system.
> Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs.
> Superior 3mm seamless mild steel heating coil rated to 400 bar / 6000 psi. > Double steel coil resulting in high thermal conductivity.
> Thermostatically adjustable temperature up to 90ºC* with quality fuel pump and solenoid valve. > Ceramic electrodes with double insulated electrode caps.
> Superior corrosion proof stainless steel outer and inner boiler housing.
TSS (Total Stop System) to protect against excessive by-pass and operational longevity of motor and pump.
Durable stainless steel cover to withstand tough environments and corrosion.
Strong upheld unit design based around longevity, easier maintenance schedule, anti-corrosion and improved ef�ciency.
Built with only recognised quality components supported by world-wide spare parts back-up.
Integral brass adjustable unloader valve for increased cleaning �exibility.
Reliable twin diesel �lter system.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Single Phase
NEW & IMPROVED
Page 65
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose (external wall mount only).
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
LS3-1 Foaming Lance with Tank.
LS12 Foaming Lance.
Sandblasting Kits.
Lances of Different Lengths.
Thermal Valve for By-pass Pump Protection.
316 Grade 2.5mm Stainless Steel Heating Coil.
Standard Speci�cations and Features
1750 psi pump working pressure.
10 litres per minute water �ow rate.
Italian engineered triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 rpm pump running speed.
Brass ‘Y’ stainless steel water inlet strainer.
User friendly gun / lance holder and electrical cord hook for increased safety.
Detergent injection facility under low pressure complete with detergent tubing and chemical �lter.
High pressure back-up safety valve.
Heavy duty solid rubber wheels for easy mobility.
Accurate pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel / brass high pressure nozzle(s).
Easily removable 24L easy �ll high capacity plastic diesel tank for burner fuel supply.
Visible illumination switch for burner fan operation.
5m power supply lead with 10 amp plug.
Motor protected by thermal overload.
Pressure switch to allow burner ignition.
Strong powder coated steel frame.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Hynox 120
Optional Extra Accessories
1
2
3
4
5
7
8
6
1
5
33
4
6
2
7
8
MODEL
Hynox 120
PRODUCT CODE
10247C
PUMP
AR RC10.12 (Series 320)
WORKING PRESSURE PSI BAR
1750 120
FLOW RATE L/PM
10
ELECTRIC MOTOR HP / KW / POLEHz / VOLT / PHASE
3.6HP / 2.7KW / 450Hz / 240v / Single
RPM
1450
APPROX WEIGHT (UNIT ONLY)
76kg
MACHINE DIMENSIONS
720mm (L) x 670mm (W) x 980mm (H)
BOXED DIMENSIONS
1130mm (L) x 720mm (W) x 750mm (H)
MAX OUTLETWATERTEMP
30 - 90°C*
MAX INLETTEMP
BURNER MODEL
V3
DIESELTANK CAP
15L
FUELCON KG/H
5.1460°C* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
Page 66
Hynox 130Electric Powered
Prof
essi
onal
/ El
ectr
ic D
riven
Hot Water
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
AISI430 highly ef�cient (>90%) and environmentally friendly V3 vertical diesel �red hot water burner system.
> Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs.
> Superior 3mm seamless mild steel heating coil rated to 400 bar / 6000 psi.
> Double steel coil resulting in high thermal conductivity.
> Thermostatically adjustable temperature up to 130ºC* with quality fuel pump and solenoid valve.
> Ceramic electrodes with double insulated electrode caps.
> Superior corrosion proof stainless steel outer and inner boiler housing.
Strong unit design based around longevity, easier maintenance schedule, anti-corrosion and improved ef�ciency.
Stainless steel by-pass cooling water tank.
Entire stainless steel chassis and cover to withstand tough environments and corrosion.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for increased cleaning �exibility, unit longevity and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Reliable twin diesel �lter system.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Single Phase
Frequent Usage
NEW & IMPROVED
Page 67
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose (external wall mount only).
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Stainless Steel Snap-on Fittings.
Foaming Lance Attachment.
Sandblasting Kits.
Lances of Different Lengths.
316 Grade 2.5mm Stainless Steel Heating Coil.
Standard Speci�cations and Features
1500 or 1900 psi pump working pressure.
10 or 12 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 rpm low pump running speed.
Brass ‘Y’ stainless steel water inlet strainer.
User friendly gun / lance holder and electrical cord hook for increased safety.
Adjustable detergent injection facility under high and low pressure complete with detergent stainless steel suction probe and brass �lter.
High pressure back-up safety relief valve.
Heavy duty solid rubber wheels for easy mobility.
Accurate pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel / brass high pressure nozzle(s).
Easily removable 24L easy �ll high capacity plastic diesel tank for burner fuel supply.
Visible illumination switch for burner fan operation.
5m power supply lead with 10 amp plug.
Motor protected by thermal overload.
Pressure switch to allow burner ignition.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Hynox 130
Optional Extra Accessories
1
2
3
4
5
7
6
1
2
3
4
5
76
MODEL
Hynox100
PRODUCT CODE
10248C
PUMP
InterpumpW112(Series 44)
WORKING PRESSURE PSI BAR
1500 100
FLOW RATE L/PM
12
ELECTRIC MOTOR HP / KW / POLEHz / VOLT / PHASE
3HP / 2.2KW / 450Hz / 240v / Single
RPM
1450
APPROX WEIGHT (UNIT ONLY)
95kg
MACHINE DIMENSIONS
920mm (L) x 600mm (W) x 730mm (H)
BOXED DIMENSIONS
950mm (L) x 650mm (W) x 750mm (H)
MAX OUTLETWATERTEMP
30 - 130°C*
MAX INLETTEMP
BURNER MODEL
V3
DIESELTANK CAP
24L
FUELCON KG/H
5.14
Hynox130
10249C InterpumpW130(Series 44)
1900 130 10 3HP / 2.2KW / 450Hz / 240v / Single
1450 95kg 920mm (L) x 600mm (W) x 730mm (H)
950mm (L) x 650mm (W) x 750mm (H)
30 - 130°C*V3 24L 5.14
60°C
60°C
HYNOX 130
* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
Page 68
Hynox 200
Frequent Usage
Electric Powered
Prof
essi
onal
/ El
ectr
ic D
riven
Hot Water
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
AISI430 highly ef�cient (>90%) and environmentally friendly V1 vertical diesel �red hot water burner system.
> Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs.
> Superior 3mm seamless mild steel heating coil rated to 400 bar / 6000 psi.
> Double steel coil resulting in high thermal conductivity.
> Thermostatically adjustable temperature up to 130ºC* with quality fuel pump and solenoid valve.
> Ceramic electrodes with double insulated electrode caps.
> Superior corrosion proof stainless steel outer and inner boiler housing.
Strong unit design based around longevity, easier maintenance schedule, anti-corrosion and improved ef�ciency.
Adjustable steam valve for increased cleaning capabilities.
Entire stainless steel chassis and cover to withstand tough environments and corrosion.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Reliable twin diesel �lter system.
TSI electronic protection security system.
> Timed delayed auto stop start 3 seconds delay on start-up. > Stop for lack of water, for leak detection and one hour in total stop. > Burner shut-down in case of lack of fuel. > 24 volt control panel with power and error indication light.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
ThreePhase
NEW & IMPROVED
Page 69
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose (external wall mount only).
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
Foaming Lance Attachment.
Sandblasting Kits.
Lances of Different Lengths.
316 Grade 2.5mm Stainless Steel Heating Coil.
Standard Speci�cations and Features
3000 psi pump working pressure.
15 or 21 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
1450 rpm low pump running speed.
Brass ‘Y’ stainless steel water inlet strainer.
User friendly gun / lance holder and electrical cord hook for increased safety.
Adjustable detergent injection facility under high and low pressure complete with detergent suction probe and �lter.
Detergent injection facility under low pressure complete with detergent tubing and chemical �lter.
High pressure back-up safety relief valve.
Heavy duty solid rubber wheels for easy mobility.
Accurate pressure gauge with glycerine.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel / brass high pressure nozzle(s).
Easily removable 24L easy �ll high capacity plastic diesel tank for burner fuel supply.
Visible illumination switch for burner fan operation.
5m power supply lead with 20 / 32 amp plug.
Motor protected by thermal overload.
Pressure switch to allow burner ignition.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Hynox 200
Optional Extra Accessories
1
2
3
4
5
7
8
6
1
23
4
5
7
6
8
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
ELECTRIC MOTOR HP / KW / POLEHz / VOLT / PHASE
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
MAX OUTLETWATERTEMP
MAX INLETTEMP
BURNER MODEL
DIESELTANK CAP
FUELCON KG/H
Hynox200-15
10250C InterpumpW201(Series 47)
3000 200 15 7.5HP / 5.5KW / 450Hz / 415v / Three
1450 137kg 1000mm (L) x 610mm (W) x 830mm (H)
1150mm (L) x 760mm (W) x 980mm (H)
30 - 130°C*V1 24L 5.74
Hynox200-21
10251C InterpumpW202(Series 47)
3000 200 21 10HP / 7.5KW / 450Hz / 415v / Three
1450 160kg 1000mm (L) x 610mm (W) x 830mm (H)
1150mm (L) x 760mm (W) x 980mm (H)
30 - 130°C*V1 24L 5.74
60°C
60°C * MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
HYNOX 200-15
Page 70
Hybrid Junior
Frequent Usage
Electric Powered
Hot Water
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
AISI430 highly ef�cient (>90%) and environmentally friendly V3 vertical diesel �red hot water burner system.
> Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs.
> Superior 3mm seamless mild steel heating coil rated to 400 bar / 6000 psi. > Double steel coil resulting in high thermal conductivity.
> Thermostatically adjustable temperature up to 130ºC* with quality Danfoss fuel pump, solenoid valve and transformer.
> Ceramic electrodes with double insulated electrode caps.
> Superior corrosion proof stainless steel outer and inner boiler housing.
Industrial galvanised steel bulletproof and robust frame construction.
Strong upheld unit design based around longevity, easier maintenance schedule and improved ef�ciency.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Easy to reach solid brass adjustable �ow unloader valve for increased cleaning �exibility, unit longevity and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
12 litre stainless steel bypass cooling water tank.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
SHOWN WITH OPTIONAL HOSE REEL.
Prof
essi
onal
/ El
ectr
ic D
riven
Single Phase
Page 71
Standard Speci�cations and Features
1500 or 1900 psi pump working pressure.
10 or 12 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 rpm low pump running speed.
Fully welded and hot dipped galvanised roll frame with galvanised cover and integrated gun and lance holder.
Brass ‘Y’ stainless steel water inlet strainer.
IP56 240 volt enclosed electrical control box for protection against dust and water ingress.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing pneumatic wheels for easy mobility.
High pressure hose quick release coupling system.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
Visible illumination switch for burner fan operation.
12 litre 304 grade stainless steel diesel tank for burner fuel supply.
5m power supply lead with 10 amp plug.
Direct-On-Line motor starter protected by thermal overload.
In-line diesel �lter system.
Pressure switch to allow burner ignition.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Hybrid Junior
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1’ Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m Capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” and/or 30” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Lances of Different Lengths.
316 Grade 2.5mm Stainless Steel Heating Coil.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
2
3
4
5
7
8
6
1
2
3
4
5
7
6
8
MODEL
HybridJunior100-12
PRODUCT CODE
HW100-12ELMP
PUMP
InterpumpW112(Series 44)
WORKING PRESSURE PSI BAR
1500 100
FLOW RATEL/PM
12
ELECTRIC MOTOR HP / KW / POLEHz / VOLT / PHASE
3HP / 2.2KW / 450Hz / 240v / Single
RPM
1450
APPROX WEIGHT (UNIT ONLY)
130kg
MACHINE DIMENSIONS
1160mm (L) x 770mm (W) x 730mm (H)
BOXED DIMENSIONS
1180mm (L) x 610mm (W) x 680mm (H)
MAX OUTLETWATERTEMP
30 - 130°C*
MAX INLETTEMP
BURNER MODEL
V3
DIESELTANK CAP
12L
FUELCON KG/H
5.14
HybridJunior130-10
HW130-10ELMP
InterpumpW130(Series 44)
1900 130 10 3HP / 2.2KW / 450Hz / 240v / Single
1450 130kg 1160mm (L) x 770mm (W) x 730mm (H)
1180mm (L) x 610mm (W) x 680mm (H)
30 - 130°C*V3 12L 5.14
9
2
9
60°C
60°C
HYBRID JUNIOR 130-10
* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
Page 72
Frequent Usage
Electric Powered
Hot Water
HybridTimer Stop with 24 Volt Control Voltage
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
AISI430 highly ef�cient (>90%) and environmentally friendly V1 vertical diesel �red hot water burner system.
> Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs.
> Superior 3mm seamless mild steel heating coil rated to 400 bar / 6000 psi.
> Double steel coil resulting in high thermal conductivity.
> Thermostatically adjustable temperature up to 130ºC* with quality fuel pump, solenoid valve and transformer.
> Ceramic electrodes with double insulated electrode caps.
> Superior corrosion proof stainless steel outer and inner boiler housing.
Two-bearing motor soft coupling mechanism connection to drive motor and pump for increased unit longevity, reduced maintenance costs and downtime.
Galvanised steel bulletproof and robust frame construction.
Quality Assured IP66 steel powder coated 24 volt low voltage electrical control box for increased safety and protection against dust and water ingress.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and serviceability.
Professional low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Low level water and / or diesel shut down options available.
Standard or timer stop models available.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
NEW & IMPROVED
24 volt Control Voltage
Prof
essi
onal
/ El
ectr
ic D
riven
ThreePhase
Page 73
Standard Speci�cations and Features
3000 psi pump working pressure.
15 or 21 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass nickel plated head with oil indication sight glass.
Industrial strength fully welded and hot dipped galvanised base and roll frame with galvanised cover and integrated gun and lance holder.
High capacity easy �ll 304 grade stainless steel diesel tank for burner fuel supply.
Easy to maintain and heavy duty C.A.V diesel fuel �lter with glass bowl for sediment / water separation identi�cation increasing burner reliability and ef�ciency.
Double safeguard to allow burner ignition via �ow and pressure switch con�guration for added unit protection.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure hose quick release coupling system.
8m long power supply lead with 20 amp three phase plug (32 amp plug available upon request).
Motor protected by thermal overload.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1’ Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m Capacity, including leader hose and mounting bracket.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” and/or 30” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Low Level Water Shutdown Protection.
Low Level Diesel Shutdown Protection.
316 Grade 2.5mm Stainless Steel Heating Coil.
Hour Meter for Usage and Service Tracking.
Castor Wheels for Easy Mobility.
Foam Filled Puncture Proof Wheels.
22L Stainless Steel Supply and By-pass Water Tank for Pump Protection with Quality Jobe Float Valve.
Optional Extra Accessories
1
2
3
4
5
7
8
6
1
2
3
4
5
7
6
8
9
2
9
10
10
HybridTimer Stop with 24 volt Control Voltage
MODEL
Hybrid200-15
PRODUCT CODE
HW200-15ELCP24
PUMP
InterpumpWS201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
ELECTRIC MOTOR HP / KW / POLEHz / VOLT / PHASE
Nicolini7.5HP / 5.5KW / 450Hz / 415v / Three
RPM
1450
APPROX WEIGHT (UNIT ONLY)
205kg
MACHINE DIMENSIONS
1170mm (L) x 860mm (W) x 870mm (H)
BOXED DIMENSIONS
1180mm (L) x 650mm (W) x 840mm (H)
MAX OUTLETWATERTEMP
30 - 130°C*
MAX INLETTEMP
BURNER MODEL
V1
DIESELTANK CAP
27L
FUELCON KG/H
5.74
Hybrid200-21
HW200-21ELCP24
InterpumpWS202(Series 47)
3000 200 21 Nicolini10HP / 7.35KW / 450Hz / 415v / Three
1450 220kg 1170mm (L) x 860mm (W) x 870mm (H)
1180mm (L) x 650mm (W) x 840mm (H)
30 - 130°C*V1 27L 5.74
* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
60°C
60°C
Page 74Page 74
Hot Water Petrol / Diesel Driven
Page 75
Why buy a hot water petrol / diesel driven high pressure water cleaner?Our range of hot water petrol / diesel driven high pressure water cleaners were researched, developed and manufactured speci�cally for high end industries such as civil construction, councils, cleaning contractors for cleaning and sanitizing tasks. Jetwave’s machines incorporate only the best leading engine brands such as Honda, Briggs & Stratton and Yanmar.
The bene�ts of petrol driven machines are unit mobility, cost effectiveness, high
performance, technologically advanced, self-contained and economical resulting in saved time and money.
The bene�ts of diesel driven machines are on-site compliance and convenience, outstanding performance in hot weather conditions, increased safety and fuel ef�ciency resulting in lower maintenance and running costs. These units have been designed with the end user in mind resulting in less downtime and increased safety for the operator.
The vertical top �red burner system was designed for easy maintenance of the ignition system. With all of the ignition components located at the top of the �ring chamber assembly there is no need to crawl under the unit for repairs.
The system has convenient removable electrodes, burner nozzle and EFM system. Any adjustment or maintenance of the �ring system is performed with ease.
Triple air �ow - The combustion air �ows through the coil assembly three times.
First pass - The air is forced between the outside wrap and the coil. This cool air passing through this chamber has two functions. As there is no outside insulation
Vertical Top Fired Burner System Bene�ts
Page 75
Hot Water Burner System Designed Around Ef�ciencies
the air cools the outer wrap to prevent any contact with the hot surface. This air is preheated before entering the �ring chamber.
Second pass - The air from the �rst pass chamber is forced into the ignition chamber. During ignition the air and �ame are forced down into the coil assembly raising the temperature of the water passing through the coil.
Third pass - The air that is forced down the �re chamber in the second pass is forced to the bottom of the chamber and is directed back up between the coil wrap. The �nal step in the process is the air is exhausted out of the chimney.
The Triple Air Flow System is designed to keep the heated air in the chamber longer to utilise the maximum amount of heat in the air �ow, leading to an increase in fuel burn and good consistent working temperatures.
Page 76
Frequent Usage
Petrol Powered
Hot Water
ExplorerStandout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
NEW! Genuine Honda iGX390 electric start petrol engine. > Green and Gold approved and engine matched tested for Australian conditions. > Automatic intelligent throttle and automatic choke. > Built in hour meter and low level oil indicator light for easy service tracking. > Prolonged engine life and easier maintenance schedule. > More horse power and torque to run all day with ease. > Dramatically increased fuel economy.
AISI430 highly ef�cient (>90%) and environmentally friendly low voltage V1 12 volt DC vertical diesel �red hot water burner system. > Mounted on anti-vibration dampers to prevent distortion and / or damage to burner system and frame. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior 3mm seamless mild steel heating coil rated to 6000 psi / 400 bar. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 130ºC* with quality fuel pump, solenoid valve and transformer.
> Ceramic electrodes with double insulated electrode caps. > Superior corrosion proof stainless steel outer and inner boiler housing.
Galvanised steel bulletproof and robust frame construction.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and serviceability.
Heavy duty steel powder coated IP66 electrical box for durability and increased safety.
22 litre stainless steel supply and bypass water tank for pump protection with quality jobe �oat valve.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
SELF CONTAINED
Prof
essi
onal
/ Pe
trol
Driv
en
Page 77
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Heavy Duty Battery Isolator Lockout Switch.
Heavy Duty Starter Isolator Lockout Switch.
316 Grade 2.5mm Stainless Steel Heating Coil.
Castor Wheels for Easy Mobility.
Foam Filled Puncture Proof Wheels.
Standard Speci�cations and Features
3000 to 4000 psi pump working pressure.
15 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with oil indication sight glass.
Low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Industrial strength fully welded and hot dipped galvanised frame with integrated belt guard and convenient gun and lance holder for added safety.
High capacity easy �ll 304 grade stainless steel diesel tank for burner fuel supply.
Easy to maintain and heavy duty C.A.V diesel fuel �lter with glass bowl for sediment / water separation identi�cation increasing burner reliability and ef�ciency.
IP65 visible illumination switch for burner fan operation.
Resilient maintenance free battery with charge indicator and heavy duty looms.
Quality alternator with integral EP Voltage Regulator.
200 amp fusible link for unit electrical protection.
Sturdy three V-pulley drive system.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing pneumatic wheels for easy mobility.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 4 year GX Engine Warranty.
Explorer
Optional Extra Accessories
1
2 3
4
57
8
6
910
1
2
3
4
5
7
8
6
9
11
10
11
MODEL
Explorer200
PRODUCT CODE
HW200-15P
PUMP
InterpumpW201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
PETROL ENGINE
Honda iGX39013HP
RPM
1450
APPROX WEIGHT (UNIT ONLY)
270kg
MACHINE DIMENSIONS
1300mm (L) x 950mm (W) x 1070mm (H)
BOXED DIMENSIONS
1320mm (L) x 740mm (W) x 960mm (H)
MAX OUTLETWATERTEMP
30 - 130°C*
MAX INLETTEMP
BURNER MODEL
V1
DIESELTANK CAP
27L
FUELCON KG/H
5.74
Explorer251
HW251-15P InterpumpWS251(Series 47)
3600 250 15 Honda iGX39013HP
1450 270kg 1300mm (L) x 950mm (W) x 1070mm (H)
1320mm (L) x 740mm (W) x 960mm (H)
30 - 130°C*V1 27L 5.74* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
60°C
60°C
11
Page 78
Frequent Usage
Petrol Powered
Hot Water
Explorer Lite TrailerStandout Features and Bene�ts
4000 psi pump working pressure.
15 litres per minute water �ow rate.
Genuine Honda iGX390 electric start petrol engine. > Green and Gold approved and engine matched tested for Australian conditions. > Automatic intelligent throttle and automatic choke. > Built in hour meter and low level oil indicator light for easy service tracking. > Prolonged engine life and easier maintenance schedule. > More horse power and torque to run all day with ease. > Dramatically increased fuel economy.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.**
Triple V Belt Drive: > Resulting in 1450 rpm pump running speed and 50% less maintenance time.
Solid brass adjustable unloader valve.
High pressure back up safety relief valve.
Durable stainless steel pressure gauge with glycerine.
Vibration control protection, via specialised long galvanised motor anti-vibration tray, integrating six dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion.
Easy �ll stainless steel fuel supply tank.
300 litre UV stabilised water cartage tank: > Extra heavy duty impact resistant polyethylene construction. > Purpose built for Australian conditions. > Easy to read calibrations for measuring water content. > Spill containment lip surrounds the lid. > Includes water baf�e to prevent excess water sloshing and trailer imbalances. > Quick drain ball valve.
Water �ltration including UV resistant, easy removable/cleanable heavy duty water cartage �lter for inlet �lter.
Two robust industrial high / low pressure hose reels featuring multi locking points for easy length selection to increase operator safety.
Fully enclosed IP65 12 volt low voltage electrical control box to prevent dust and water ingress. > 12 volt twice over insulated protected wire.
Resilient heavy duty maintenance free battery with heavy duty looms enclosed in protective battery box with charge indicator.
Battery isolator lock-out switch.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Safety decals including safety precautions instructions, attention and caution labelling.
Prof
essi
onal
/ Pe
trol
Driv
en
SELF CONTAINED
Page 79
Standard Accessories Include
30 metres of 3/8” double wire braid blue pressure hose (includes quick release coupling system).
30 metre of 3/4” black reinforced low pressure water supply hose with brass snap on tap �ttings.
Ergonomic heavy duty spray gun with back part lance, quick coupling connector and stainless steel snap-on tail.**
Stainless steel dual lance with variable pressure control complete with nozzles.
Trailer Speci�cations and Features
Purpose built high pressure water cleaner trailer.
8’ x 5’ single axle galvanised �at deck with mudguards.
Heavy duty folding jockey wheel.
Tough duragal RHS 75 x 50 x 3mm chassis construction.
Seven (7) leaf spring ‘outback’ slipper suspension.
Heavy duty 60mm square single axle with heavy duty bearings.
Load rated to 1999kg GTM.
Extra-long draw bar for smoother towing and additional storage capability.
Two (2) adjustable drop-down rear stabiliser legs.
Rated safety chain.
Galvanised dimple sheeting.
Two (2) 8 ply light truck tyres with white powder coated steel rims.
Explorer Lite Trailer
Extra Standard Unit Features
2 x draw bar on front of trailer.
Operating �ashing LED orange beacon light (includes loom, relay and on/off switch).
Two (2) 360® swivel LED night work lights (includes loom, relay and on/off switch).
12 volt / 7 amp solar charge control unit and solar panel for continual battery trickle charge.
Note
State and territory laws and company speci�c regulations will vary. Therefore it’s the client’s responsibility to correspond with the appropriate authorities to ensure all requirements are met. Enquire for details and to discuss speci�c needs and applicable provisions.Snd territory
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 4 year GX Engine Warranty.
One (1) spare wheel.
Quality maintenance free LED rear lights.
Mechanical assisted disc brakes with manual hand brake.
Twelve (12) months registration.* (NB: This is at an additional cost and may be subject to change depending on the particular state/territory).Heavy duty
Page 80
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Heavy Duty Battery Isolator Lockout Switch.
Heavy Duty Starter Isolator Lockout Switch.
316 Grade 2.5mm Stainless Steel Heating Coil.
Castor Wheels for Easy Mobility.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
2 3
4
57
8
6
910
1
2
3
4
5
7
8
6
9
11
10
11
MODEL
Explorer200-15TM
PRODUCT CODE
HW200-15PTM
PUMP
InterpumpW201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
PETROL ENGINE
Honda iGX39013HP
RPM
1450
APPROX WEIGHT (UNIT ONLY)
TBA
OUTLET HOTWATERTEMP
30 - 130°C#
MAX INLETTEMP
BURNER MODEL
V1
DIESELTANK CAP
27L
FUELCON KG/H
5.74
Explorer251-15TM
HW251-15PTM InterpumpWS251(Series 47)
3600 250 15 Honda iGX39013HP
1450 TBA30 - 130°C#V1 27L 5.74
* FEATURE / UPGRADE MAY BE AVAILABLE AT AN ADDITIONAL COST.** FEATURE NOT PRESENT ON EXPLORER 275-15# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
60°C
60°C
11
Explorer275-15TM
HW275-15PTM Annovi Reverberi (AR)RK15.28(Series 228)
4000 275 15 Honda iGX39013HP
1450 TBA30 - 130°C*V1 27L 5.7460°C
Page 81
Page 82
Frequent Usage
Petrol Powered
Hot Water
Explorer TrailerStandout Features and Bene�ts
3000 - 4000 psi pump working pressure.
15 litres per minute water �ow rate.
Genuine Honda iGX390 electric start petrol engine. > Green and Gold approved and engine matched tested for Australian conditions. > Automatic intelligent throttle and automatic choke. > Built-in hour meter and low level oil indicator light for easy service tracking. > Prolonged engine life and easier maintenance schedule. > More horse power and torque to run all day with ease. > Dramatically increased fuel economy.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.**
Triple V Belt Drive: > Resulting in 1450 rpm pump running speed and 50% less maintenance time.
Solid brass adjustable unloader valve.
High pressure back up safety relief valve.
Durable stainless steel pressure gauge with glycerine.
Vibration control protection, via specialised long galvanised motor anti-vibration tray, integrating six dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion.
Easy �ll stainless steel fuel supply tank.
300 litre UV stabilised water cartage tank: > Extra heavy duty impact resistant polyethylene construction. > Purpose built for Australian conditions. > Easy to read calibrations for measuring water content. > Spill containment lip surrounds the lid. > Includes water baf�e to prevent excess water sloshing and trailer imbalances. > Quick drain ball valve.
Water �ltration including UV resistant, easy removable/cleanable heavy duty water cartage �lter for inlet �lter.
Two robust industrial high / low pressure hose reels featuring multi locking points for easy length selection to increase operator safety.
Fully enclosed IP65 12 volt low voltage electrical control box to prevent dust and water ingress. > 12 volt twice over insulated protected wire.
Resilient heavy duty maintenance free battery with heavy duty looms enclosed in protective battery box with charge indicator.
Battery isolator lock-out switch.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Safety decals including safety precautions instructions, attention and caution labelling.
Prof
essi
onal
/ Pe
trol
Driv
en
SELF CONTAINED
Page 83
Standard Accessories Include
30 metres of 3/8” double wire braid blue pressure hose (includes quick release coupling system).
30 metre of 3/4” black reinforced low pressure water supply hose with brass snap on tap �ttings.
Ergonomic heavy duty spray gun with back part lance, quick coupling connector and stainless steel snap-on tail.**
Stainless steel dual lance with variable pressure control complete with nozzles.
Trailer Speci�cations and Features
Purpose built high pressure water cleaner trailer.
8’ x 5’ single axle galvanised �at deck with mudguards.
Heavy duty folding jockey wheel.
Tough duragal RHS 75 x 50 x 3mm chassis construction.
Seven (7) leaf spring ‘outback’ slipper suspension.
Heavy duty 60mm square single axle with heavy duty bearings.
Load rated to 1999kg GTM.
Extra-long draw bar for smoother towing and additional storage capability.
Two (2) adjustable drop-down rear stabiliser legs.
Rated safety chain.
Galvanised dimple sheeting.
Two (2) 8 ply light truck tyres with white powder coated steel rims.
Explorer Trailer
Extra Standard Unit Features
1 x draw bar on front of trailer.
Operating �ashing LED orange beacon light (includes loom, relay and on/off switch).
Two (2) 360® swivel LED night work lights (includes loom, relay and on/off switch).
12 volt / 7 amp solar charge control unit and solar panel for continual battery trickle charge.
Note
State and territory laws and company speci�c regulations will vary. Therefore it’s the client’s responsibility to correspond with the appropriate authorities to ensure all requirements are met. Enquire for details and to discuss speci�c needs and applicable provisions.Snd territory laws and company specific regulations will vary. Therefore it’s the Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX Engine Warranty.
One (1) spare wheel.
Quality maintenance free LED rear lights.
Mechanical assisted disc brakes with manual hand brake.
Twelve (12) months registration.* (NB: This is at an additional cost and may be subject to change depending on the particular state/territory).Heavy duty
Page 84
Complete ‘Turbo’ Head with Stainless Steel Lance.
Extra Heavy Duty Hose Reel with 120 metres of 3/8” hose capacity featuring: 24 locking point, stainless steel guide rollers, quality swivel with easy grease point access, dual heavy duty bearings and hand crank.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Low Level Water Engine Cut Out for Pump Protection.
Lances of Different Lengths.
Additional Safety Equipment pack: > PPE including: hard hats, hi-visibility vests, witches hats / hazard cones, safety sign, �rst aid kit, earmuffs and eye protection.
One (1) x mounted 4.5kg ABE powder type �re extinguisher for A Class - Solids, B Class - Liquids and E Class - Electrical Fires.
Safety Sign - Keep Clear High Pressure Water Jetting in Operation.
Optional Extra Accessories
1
2 3
1
2
3
MODEL
Explorer200-15TM
PRODUCT CODE
HW200-15PTM
PUMP
InterpumpW201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
PETROL ENGINE
Honda iGX39013HP
RPM
1450
APPROX WEIGHT (UNIT ONLY)
TBA
OUTLET HOTWATERTEMP
30 - 130°C#
MAX INLETTEMP
BURNER MODEL
V1
DIESELTANK CAP
27L
FUELCON KG/H
5.74
Explorer251-15TM
HW251-15PTM InterpumpWS251(Series 47)
3600 250 15 Honda iGX39013HP
1450 TBA30 - 130°C#V1 27L 5.74
* FEATURE / UPGRADE MAY BE AVAILABLE AT AN ADDITIONAL COST.
** FEATURE NOT PRESENT ON EXPLORER 275-15.
# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
60°C
60°C
Explorer275-15TM
HW275-15PTM Annovi Reverberi (AR)RK15.28(Series 228)
4000 275 15 Honda iGX39013HP
1450 TBA30 - 130°C*V1 27L 5.7460°C
Page 85
Page 86
Frequent Usage
Diesel Powered
Hot Water
Explorer DieselDiesel
Standout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of triplex high pressure piston plunger pumps - Interpump.
Yanmar L100 diesel air-cooled electric start engine. > Factory �tted solenoid for energised key start and key stop operation. > Low vibration and low noise levels leading to improved operator comfort. > Proprietary direct injection technology, resulting in lower fuel consumption and running costs. > Easy viewable fuel tank gauge for extra convenience. > Effortless electric start with assisted auto-run decompressor.
AISI430 highly ef�cient (>90%) and environmentally friendly low voltage V1 12 volt DC vertical diesel �red hot water burner system. > Mounted on anti-vibration dampers to prevent distortion and / or damage to burner system and frame.> Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior 3mm seamless mild steel heating coil rated to 6000 psi / 400 bar. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 130ºC* with quality fuel pump, solenoid valve and transformer.
> Ceramic electrodes with double insulated electrode caps. > Superior corrosion proof stainless steel outer and inner boiler housing.
Galvanised steel bulletproof and robust frame construction.
‘ZERO’ line pressure solid brass adjustable unloader valve for increased safety and serviceability.
Heavy duty steel powder coated IP66 electrical box for durability and increased safety.
22 litre stainless steel supply and bypass water tank for pump protection with quality jobe �oat valve.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
SHOWN WITH OPTIONAL RHS SKID FRAME**
Prof
essi
onal
/ Di
esel
Driv
en
MINE SPECAVAILABLE
Page 87
Standard Speci�cations and Features
3000 psi pump working pressure.
15 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass forged nickel plated head with oil indication sight glass.
Low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Industrial strength fully welded and hot dipped galvanised frame with integrated belt guard and hose reel mounting plate.
Convenient gun and lance holder for added safety (trolley frame only).
High capacity easy �ll 304 grade stainless steel diesel tank for burner fuel supply.
Easy to maintain and heavy duty C.A.V diesel fuel �lter with glass bowl for sediment / water separation identi�cation increasing burner reliability and ef�ciency.
IP65 visible illumination switch for burner fan operation.
Resilient maintenance free battery with charge indicator and heavy duty looms.
Quality alternator with integral EP Voltage Regulator.
200 amp fusible link for unit electrical protection.
Sturdy three V-pulley drive system.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing pneumatic wheels for easy mobility (trolley frame only).
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Yanmar 24 month or 2000 hours engine warranty.
Explorer Diesel
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
Engine Hour Meter and Tachometer for Easy Service Tracking.
Low Level Water Engine Cut Out for Pump Protection.
316 Grade 2.5mm Stainless Steel Heating Coil.
Castor Wheels for Easy Mobility (trolley frame only).
Foam Filled Puncture Proof Wheels.
RHS Skid Frame (as pictured).
Optional Extra Accessories
1
2
3
4
5
6
1
2
3
4
5
6
24 MONTH ENGINE WARRANTY
MODEL
Explorer200 D
PRODUCT CODE
HW200-15D
PUMP
InterpumpWS201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
PETROL ENGINE
Yanmar L10010HP
RPM
1450
APPROX WEIGHT (UNIT ONLY)
280kg
MACHINE DIMENSIONS
1300mm (L) x 950mm (W) x 1070mm (H)
BOXED DIMENSIONS
1320mm (L) x 740mm (W) x 960mm (H)
MAX OUTLETWATERTEMP
30 - 130°C*
MAX INLETTEMP
BURNER MODEL
V1
DIESELTANK CAP
27L
FUELCON KG/H
5.74
24 MONTH ENGINE WARRANTY
* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
** TROLLEY FRAME CONFIGURATION PROVIDED AS STANDARD.
60°C
Mine Speci�cation Safety Accessories
Lockable Double Pole Battery Isolators.
High Vis Re�ective Frame Strips.
Full Operator Cage Protection.
Safety Emergency Stop Shutdown Button.
4.5kg Fire Extinguisher.
Dry Cell Battery in a Box with Jump Start Connections.
Bunded Oil Tray.
Orange Beacon Light.
Page 88
Frequent Usage
Diesel Powered
Hot Water
Explorer DieselTrailer
Diesel
Standout Features and Bene�ts
3000 psi pump working pressure.
15 litres per minute water �ow rate.
Quality Yanmar L100 (10 hp) diesel air-cooled electric start engine or Kohler KD15-440: > Factory �tted solenoid for energised key start and key stop operation. > Low vibration and low noise levels leading to improved operator comfort. > Proprietary direct injection technology, resulting in lower running costs. > Easy viewable fuel tank gauge for extra convenience. > Effortless electric start with assisted auto-run decompressor.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and /or nickel plated head with easy oil indication sight glass.
Forged nickel plated solid brass pump head and stainless steel valves.
1450 rpm pump running speed and 50% less maintenance time.
V2 12 Volt 90% fuel ef�cient vertical heating cylinder for added increased operator safety.
3mm mild steel seamless heating coil rated to 400 bar / 6000 psi at 30 lpm.
3 x cast steel spa-taper lock V pulley system.
3 x quad power belts.
Quality Bosch 85 amp alternator with integral EP voltage regulator.
Quality bypass valve �tted to pump head with bypass water recirculating back to water tank to prevent pump overheat.
Adjustable detergent injection facility under low pressure complete with detergent tubing and chemical �lter.
Durable stainless steel pressure gauge with glycerine.
Robust fully welded heavy duty hot dipped galvanised roll frame.
Vibration control protection, via specialised long galvanised motor anti-vibration tray, integrating six dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion.
1000 litre UV stabilised water cartage tank: > Integrated low level water engine shut-off for pump/unit protection. > Extra heavy duty impact resistant polyethylene construction. > Purpose built for Australian conditions. > Easy to read calibrations for measuring water content. > Spill containment lip surrounds the lid. > Includes water baf�e to prevent excess water sloshing and trailer imbalances.
Water �ltration including UV resistant, easy removable/cleanable heavy duty water cartage �lter and brass ‘Y’ stainless steel water inlet �lter.
SHOWN WITH OPTIONAL PREMIUM REELS.
Prof
essi
onal
/ Di
esel
Driv
en
Page 89
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Trailer Speci�cations and Features
Purpose built mining; hire and rental high pressure water cleaner trailer.
Australian made 9’ x 6’ tandem axle low deck galvanised �at deck with mudguards.
Heavy duty folding jockey wheel.
D/Bar and chassis tough duragal RHS 100 x 50 x 4mm chassis construction.
12 volt / 7 amp solar charge control unit and solar panel for continual battery trickle charge.
Nine (9) leaf spring ‘outback’ slipper suspension.
Heavy duty 50mm square single axle with heavy duty bearings.
Load rated to 1990kg GTM.
Extra-long draw bar for smoother towing and additional storage capacity.
Cable brakes with hand brake.
Two (2) adjustable drop-down rear stabiliser legs.
Rated safety chain.
Galvanised dimple sheeting.
Four (4) 8 ply light truck tyres with white powder coated steel rims.
One (1) drop down spare wheel.
Quality multi volt maintenance free LED rear lights.
Twelve (12) months registration.* (NB: This is at an additional cost and may be subject to change depending on the particular state/territory).
Explorer Diesel Trailer
Safety Equipment
Operating instruction manual for risk assessments carried out under OH&S guidelines.*
One (1) x mounted 4.5kg ABE powder type �re extinguisher for A Class - Solids, B Class - Liquids and E Class - Electrical �res.
Optional Extras Upon Request
Integrated safety emergency stop shut-down button.
Two (2) 360® swivel LED night work lights (includes loom, relay and on/off switch).
12 volt / 7 amp solar charge control unit and solar panel for continual battery trickle charge.
Heavy duty starter (yellow) isolator lockout switch.
Bunded oil tray for engine / pump.
Removable powder coated “Safety Yellow” protective guarding.
High visibility re�ective tape on edges (class 1).
Yellow loose wheel nut indicators.
Two (2) x wheel chocks.
Upgrade: Bosch extra heavy duty two (2) pole (active and earth) battery isolator lockout switch (MG15 Mine Compliant).
Additional Safety Equipment Pack: > PPE including: hard hats, hi-visibility vests, hazard cones, bunting, safety sign, �rst aid kit, ear muffs and eye protection.
*Optional Mine Compliance and Speci�cations Kit
State and territory laws and company speci�c regulations will vary. Therefore it’s the client’s responsibility to correspond with the appropriate authorities to ensure all requirements are met. Enquire for details and to discuss speci�c needs and applicable provisions.
Page 90
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘LS3-1’ Foaming Lance with Tank.
‘LS12’ Foaming Lance.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
‘Vario’ Adjustable Fan Nozzle with Stainless Steel Lance.
Stainless Steel Snap-on Fittings.
‘TS8’ Complete Sandblaster Lance.
Hour Meter for Usage and Service Tracking.
Lances of Different Lengths.
Optional Extra Accessories
1
2
3
9
5
6
1
2
3
4
5
6
24 MONTH ENGINE WARRANTY
MODEL
DieselExplorer200
PRODUCT CODE
HW200-15DTM
PUMP
InterpumpWS201(Series 47)
WORKING PRESSURE PSI BAR
3000 200
FLOW RATEL/PM
15
DIESEL ENGINE
Yanmar L10010HP
RPM
1450
APPROX WEIGHT (UNIT ONLY)
600kg
MACHINE DIMENSIONS
1300mm (L) x 950mm (W) x 1070mm (H)
DIESEL ENGINE TANK CAPACITY
4.7L
DIESEL BURNER TANK CAPACITY
25L
* MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
** TROLLEY FRAME CONFIGURATION PROVIDED AS STANDARD.
8
7
7
8
9
10
4
10
Warranty
24 month or 2000 hour Yanmar commercial engine warranty.
5 year water tank warranty.
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY
24 MONTH ENGINE WARRANTY
WATER TANK CAPACITY
1000L
Page 91
THIS PAGE HAS BEEN LEFT BLANK INTENTIONALLY.
Page 92
Frequent Usage
Hot Water
Executive
Prof
essi
onal
/ Pe
trol
Driv
en
Petrol Powered
Standout Features and Bene�ts
Pump supplied by an Italian manufacturer of high pressure piston plunger pumps - Annovi Reverberi (AR).
Genuine Honda GX630 or GX690 electric start petrol V-Twin engine. > Offers higher horsepower, quiet operation and greater fuel ef�ciency. > Green and Gold approved and engine matched tested for Australian conditions. > Digital CDI ignition system with variable timing. > Rev limiter to protect against damage from over revving. > Built-in hour meter and low level oil indicator light for easy service tracking. > Integrated low level oil cut-out protection. > Automatic mechanical de-compression system. > High ef�ciency 36 blade cooling fan.
AISI430 highly ef�cient (>90%) and environmentally friendly low voltage V2 12 volt DC vertical diesel �red hot water burner system. > Mounted on anti-vibration dampers to prevent distortion and / or damage to burner system and frame. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior 3mm seamless mild steel heating coil rated to 6000 psi / 400 bar.
> Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 130ºC# with quality fuel pump, solenoid valve and transformer. > Ceramic electrodes with double insulated electrode caps. > Superior corrosion proof stainless steel outer and inner boiler housing.
Galvanised steel bulletproof and robust frame construction.
Solid brass adjustable unloader valve for increased safety and serviceability.
Heavy duty steel powder coated IP66 electrical box for durability and increased safety.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard Accessories Include
10m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.
Stainless steel dual lance with variable pressure control complete with nozzles.
Single stainless steel thermically insulated lance complete with soft trigger spray gun.*
NEW
Page 93
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘LS3-1 Foaming Lance with Tank.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” - 30” Rotary Floor Cleaner.
Stainless Steel Snap-on Fittings.
‘LS12’ Foaming Lance.
Sandblasting Kits.
Safety Emergency Stop Shutdown Button.
Heavy Duty Battery Isolator Lockout Switch.
22L Stainless Steel Supply and By-pass Water Tank for Pump Protection with Quality Jobe Float Valve.
Low Level Water Engine Cut Out for Pump Protection.
Castor Wheels for Easy Mobility (trolley frame only).
Standard Speci�cations and Features
4000 or 5000 psi pump working pressure.
21 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with oil indication sight glass.
Low pump 1450 rpm running speed equating to 50% less maintenance time and increased reliability.
Industrial strength fully welded and hot dipped galvanised frame with integrated belt guard and convenient gun and lance holder for added safety.
High capacity easy �ll 304 grade stainless steel diesel tank for burner fuel supply.
Easy to maintain and heavy duty C.A.V diesel fuel �lter with glass bowl for sediment / water separation identi�cation increasing burner reliability and ef�ciency.
IP65 visible illumination switch for burner fan operation.
Resilient maintenance free battery with charge indicator and heavy duty looms.
Quality alternator with integral EP Voltage Regulator.
250 amp fusible link for unit electrical protection.
High pressure back-up safety valve.
Sturdy three V-pulley drive system.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
14” heavy duty double bearing foam �lled puncture proof wheels for easy mobility.
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX Engine Warranty.
Executive
Optional Extra Accessories
1
2 3
4
57
8
6
910
1
2
3
4
5
7
8
6
9
11
10
MODEL
Executive 275
PRODUCT CODE
HW275-21P
PUMP
Annovi Reverberi (AR) XW 21.28N (Series 194)
WORKING PRESSURE PSI BAR
4000 275
FLOW RATEL/PM
21
PETROL ENGINE
HondaGX630
RPM
1450
APPROX WEIGHT (UNIT ONLY)
300kg
MACHINE DIMENSIONS
1380mm (L) x 970mm (W) x 1160mm (H)
BOXED DIMENSIONS
1400mm (L) x 770mm (W) x 1050mm (H)
MAX OUTLETWATERTEMP
30-130°C#
MAX INLETTEMP
BURNER MODEL
V2
DIESELTANK CAP
27L
FUELCON KG/H
5.74
Executive 350
HW350-21P Annovi Reverberi (AR) XW 21.35N (Series 194)
5000 350 21 HondaGX630
1450 300kg 1380mm (L) x 970mm (W) x 1160mm (H)
1400mm (L) x 770mm (W) x 1050mm (H)
30-130°C#V2 27L 5.74
* FEATURE PRESENT ONLY ON EXECUTIVE MODEL 350.
# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
60°C
60°C
11
Page 94
Prof
essi
onal
/ Di
esel
Driv
en
Executive Silent PackStandout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Perkins 400 Series diesel liquid-cooled electric start engine. > InteliDrive Nano engine management system. - Electronic display. - Push button start/stop delay to prevent overcranking. - Automatic shut-off oil pressure. - Automatic temperature. - Fuel shut-off solenoid. > Longer maintenance intervals, low vibration and low noise levels leading to improved all round convenience. > Indirect injection technology, resulting in lower fuel consumption and running costs. > Closed lubrication system with breather. > Low sensitivity to fuel quality and approved for operation on biodiesel concentrations of up to 20%.
Highly ef�cient (>90%) and environmentally friendly low voltage 12 volt DC vertical diesel �red hot water burner system. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior seamless mild steel heating coil. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 130ºC# with quality fuel pump, solenoid valve and transformer. > Ceramic electrodes with double insulated electrode caps.
Superior SOUND PROOF cabinet leading to lower noise emissions resulting in an increased window of operation with signi�cantly less noise disturbance to the community.
Bulletproof and robust zinc annealed powder coated cabinet with removable side covers.
Low 1500 rpm direct motor and pump soft coupling system resulting in less moving parts for better reliability.
Safety emergency stop shutdown button.
Integrated forklift tyne pockets for easy manoeuvrability and work site placement.
4 x top lifting lugs for transportation via crane.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard Accessories Include
30m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.**
Stainless steel dual lance with variable pressure control complete with nozzles.**
Single stainless steel thermically insulated lance complete with soft trigger spray gun and quality nozzle.
NEW AUTONOMOUS
SOUND PROOF
Frequent Usage
Hot Water
Diesel Powered
Diesel
≈ 66 dB*
Motor & Pump
1500 rpm
Page 95
Standard Speci�cations and Features
3600 or 5000 psi pump working pressure.
21 or 23 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
Low pump 1500 rpm running speed equating to 50% less maintenance time and increased reliability.
High capacity easy �ll diesel tank for burner fuel supply.
Easy to maintain diesel fuel �lter with glass bowl for sediment / water separation identi�cation increasing burner reliability and ef�ciency.
Visible illumination switch for burner fan operation.
Sealed and viewable engine control panel.
Resilient maintenance free battery and heavy duty looms.
High quality solid brass or stainless steel adjustable unloader valve for increased safety and serviceability.
Durable stainless steel pressure gauge with glycerine.
Brass ‘Y’ stainless steel water inlet strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.**
Quality German made hardened stainless steel / brass high and low pressure nozzle(s).
High pressure back-up and safety valve.
Provision for low level water cut out if plumbed to water tank.
Complete operator and maintenance manuals.
Warranty
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY
Perkins 12 month engine warranty. CONDITIONS APPLY
Executive Silent Pack
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” - 30” Rotary Floor Cleaner.
Optional Extra Accessories
1
2
3
4
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
DIESEL ENGINE
APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
MAX INLETTEMP
RPM
Executive Silent 250
HW250-21I InterpumpW3021(Series 47)
3600 280 21 Perkins 403A-11 (400 Series)
568kg 1100mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
60°C 1500
Executive Silent 350
HW350-23I InterpumpW3523 (HP Series 66)
5000 350 23 Perkins 404D-22 (400 Series)
633kg 1100mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
60°C 1500
BURNER MODEL
CR
CR
5
OUTLETHOT WATERTEMP
30 - 130°C#
30 - 130°C#
FUELCONKG/H
6.55
6.55
* DECIBEL READING PERFORMED WITH UNIT MOUNTED ON UTE BED AT A DISTANCE OF 7M WITHOUT GUN ACTIVATION.
** FEATURE PRESENT ON MODEL EXECUTIVE SILENT 250.
# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
SHOWN WITH OPTIONAL WATER TANK.
12 MONTH ENGINE WARRANTY
Page 96
Prof
essi
onal
/ Di
esel
Driv
en
Executive Silent PackStandout Features and Bene�ts
Pump supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Perkins 400 Series diesel liquid-cooled electric start engine. > InteliDrive Nano engine management system. - Electronic display. - Push button start/stop delay to prevent overcranking. - Automatic shut-off oil pressure. - Automatic temperature. - Fuel shut-off solenoid. > Longer maintenance intervals, low vibration and low noise levels leading to improved all round convenience. > Indirect injection technology, resulting in lower fuel consumption and running costs. > Closed lubrication system with breather. > Low sensitivity to fuel quality and approved for operation on biodiesel concentrations of up to 20%.
Highly ef�cient (>90%) and environmentally friendly low voltage 12 volt DC vertical diesel �red hot water burner system. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior seamless mild steel heating coil. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 130ºC# with quality fuel pump, solenoid valve and transformer.
> Ceramic electrodes with double insulated electrode caps.
Superior SOUND PROOF cabinet leading to lower noise emissions resulting in an increased window of operation with signi�cantly less noise disturbance to the community.
Bulletproof and robust zinc annealed powder coated cabinet with removable side covers.
Integrated forklift tyne pockets for easy manoeuvrability and work site placement.
4 x top lifting lugs for transportation via crane.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Standard Accessories Include
30m of 3/8” double wire braid blue high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part thermically insulated lance and quick coupling connector.**
Stainless steel dual lance with variable pressure control complete with nozzles.**
Single stainless steel thermically insulated lance complete with soft trigger spray gun and quality nozzle.
Frequent Usage
Hot Water
Diesel Powered
Diesel
≈ 66 dB*
Motor & Pump
1500 rpm
MINE SPEC
Page 97
Standard Speci�cations and Features
3600 or 5000 psi pump working pressure.
21 or 23 litres per minute water �ow rate.
Professional ‘Italian’ Interpump triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
150 litre by-pass water cooling tank for by-pass cooling and pump protection.
Low pump 1500 rpm running speed equating to 50% less maintenance time and increased reliability.
High capacity easy �ll diesel tank for burner fuel supply.
Easy to maintain diesel fuel �lter with glass bowl for sediment / water separation identi�cation increasing burner reliability and ef�ciency.
Visible illumination switch for burner fan operation.
Sealed and viewable engine control panel.
Resilient maintenance free battery and heavy duty looms.
High quality solid brass or stainless steel adjustable unloader valve for increased safety and serviceability.
Durable stainless steel pressure gauge with glycerine.
3.5 inch washable inlet water strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.**
High pressure back-up and safety valve.
Low level water for engine cut-out
Complete operator and maintenance manuals.
Warranty
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY
Perkins 12 month engine warranty. CONDITIONS APPLY
Executive Silent Pack
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
2 x 360 Swivel LED Night Work Lights.
Safety Equipment Pack: PPE including Hard Hats, First Aid Kit, 2 x High Visibility Vests, 4 x Hazard Cone.
Optional Extra Accessories
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
DIESEL ENGINE
APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
MAX INLETTEMP
RPM
Executive Silent 250
HW250-21I InterpumpW3021(Series 47)
4000 280 21 Perkins 403A-11 (400 Series)
568kg 1100mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
60°C 1500
Executive Silent 350
HW350-23I InterpumpW3523 (HP Series 66)
5000 350 23 Perkins 404D-22 (400 Series)
633kg 1100mm (L) x 700mm (W) x 860mm (H)
970mm (L) x 600mm (W) x 670mm (H)
60°C 1500
BURNER MODEL
CR
CR
OUTLETHOT WATERTEMP
30 - 130°C#
30 - 130°C#
FUELCONKG/H
6.55
6.55
12 MONTH ENGINE WARRANTY
* DECIBEL READING PERFORMED WITH UNIT MOUNTED ON UTE BED AT A DISTANCE OF 7M WITHOUT GUN ACTIVATION.
** FEATURE PRESENT ON MODEL EXECUTIVE SILENT 250.
# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
120 litre Bunded Oil Tray for Engine/Pump
Low Voltage Control Burner (for user safety).
Heavy Duty Battery (Red) Isolator Lockout Switch.
Heavy Duty Starter (Yellow) Isolator Lockout Switch.
Emergency Stop Shut-down Button.
‘Danger Keep Clear When High Pressure Water Jetter is in Operation’ Warning Fold Out Sign.
Over Pressure Pump Relief Valve.
2 Control Mechanisms - 1 x High Pressure Ball Valve (machine shut off) and 1 x Hand Piece On/Off (trigger gun operation).
2 x Certi�ed Hose Restraint Sock 316 20mm with Brackets, Black Fabric Sock and Nipple.
4.5kg Fire Extinguisher with Quick Release Mounting Bracket.
High Vis Re�ective Frame Strips on Edges (Class 1).
LED Orange Flashing Hazard Light.
Keyed Lockable Panels with 8 additional Rubber Pull Latches.
Anderson Style Jump Start Recepticle (other options available upon request).
Included Mine Speci�cation Safety Accessories
MINE SPEC
Page 98
Prof
essi
onal
/ Di
esel
Driv
en
Executive Silent Pack Trailer
Frequent Usage
Hot Water
Diesel Powered
Diesel
≈ 66 dB*
Motor & Pump
1500 rpm Standout Features and Bene�ts
3000 psi pump working pressure.
Per gun (2) = 20.5 litres per minute water �ow rate.
Perkins 404D-22 4 cylinder liquid-cooled electric start engine. > InteliDrive Nano engine management system. - Electronic display. - Automatic shut-off oil pressure. - Automatic temperature. - Fuel shut-off solenoid. > Longer maintenance intervals, low vibration and low noise levels leading to improve all round convenience. > Indirect injection technology, resulting in lower fuel consumption and running costs. > Closed lubrication system with breather.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and/or nickel plated head with easy oil indication sight glass.
Highly ef�cient (>90%) and environmentally friendly low voltage 12 volt DC vertical diesel �red hot water burner system. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior seamless mild steel heating coil. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 120ºC# with quality fuel pump, solenoid valve and transformer. > Ceramic electrodes with double insulated electrode caps.
Superior SOUND PROOF cabinet leading to lower noise emissions resulting in an increased window of operation with considerably less noise disturbance to the community.
Robust zinc annealed powder coated cabinet with removable side covers.
Integrated forklift tyne pockets for easy manoeuvrability and work site placement.
Vibration control protection, via specialised long galvanised motor anti-vibration tray, integrating six dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion.
1500 litre UV stabilised water cartage tank: > Integrated low level water engine shut-off for pump/unit protection. > Extra heavy duty impact resistant polyethylene construction. > Purpose built for Australian conditions. > Easy to read calibrations for measuring water content. > Spill containment lip surrounds the lid. > Includes water baf�e to prevent excess water sloshing and trailer imbalances.
Two (2) x industrial hose reel �tted with 50m of Jetwave 3/8” double wire braid blue high pressure hose complete with screw type quick coupling.
MINE SPEC
Page 99
One (1) x industrial hose reel �tted with 50m of ¾” low pressure water feed supply hose (includes brass tap snap coupling). > Both reels feature multi-locking points for easy length selection and increased operator safety.
Low pump 1500 rpm running speed equating to 50% less maintenance time and increased reliability.
High capacity easy �ll diesel tank for burner fuel supply.
Easy to maintain diesel fuel �lter with glass bowl for sediment/water separation identi�cation increasing burner reliability and ef�ciency.
Visible illumination switch for burner fan operation.
Sealed and viewable engine control panel.
Resilient maintenance free battery and heavy duty looms.
High quality brass or stainless steel adjustable unloader valve for increased safety and serviceability.
Durable stainless steel pressure gauge with glycerine.
2 inch washable inlet water strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
High pressure back-up and safety valve.
Low level water for engine cut-out.
Complete operator and maintenance manual.
Standard Accessories Include
2 x heavy duty gun and dual lance with variable control.
2 x turbo rotating nozzles and lance and quick coupling.
Trailer Speci�cations and Features
Purpose built high pressure water cleaner trailer.
Australian made 11ft (l) x 6ft (w) tandem axle low deck galvanised �at deck with mudguards.
Extra-long draw bar (1800mm) for smoother towing and additional storage capacity.
One (1) x lockable mounted aluminium tool/storage box on front draw bar.
Rock and roll suspension.
Heavy duty C50 square axles
Load rated to 3500kg GTM
Twin electric brakes with booster (off-road 3.5 tonne rated).
Two (2) adjustable drop-down rear stabiliser legs.
Two (2) wheel chocks mounted on mud guards.
Heavy duty folding jockey wheel.
Galvanised dimple sheeting.
Four (4) 8 ply light truck tyres with white powder coated steel rims.
One (1) spare wheel.
Quality multi volt maintenance free LED rear lights with two (2) side lights.
Yellow wheel indicators.
Extra long safety chains with two (2) certi�ed D Shackles.
Ring pull style hitch (6 tonne rated).
Operator’s Handbook from Safe Work Australia - Guide for Managing Risks from High Pressure Water Jetting.
Twelve (12) months registration.* (NB: This is at an additional cost and may be subject to change depending on the particular state/territory).
Executive Silent Pack Trailer
Page 100
Warranty
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY
5 year water tank warranty.
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
2 x 360 Swivel LED Night Work Lights.
Safety Equipment Pack: PPE including Hard Hats, First Aid Kit, 2 x High Visibility Vests, 4 x Hazard Cone.
Optional Extra Accessories
120 litre Bunded Oil Tray for Engine/Pump
Low Voltage Control Burner (for user safety).
Heavy Duty Battery (Red) Isolator Lockout Switch.
Heavy Duty Starter (Yellow) Isolator Lockout Switch.
Emergency Stop Shut-down Button.
‘Danger Keep Clear When High Pressure Water Jetter is in Operation’ Warning Fold Out Sign.
Over Pressure Pump Relief Valve.
2 Control Mechanisms - 1 x High Pressure Ball Valve (machine shut off) and 1 x Hand Piece On/Off (trigger gun operation).
2 x Certi�ed Hose Restraint Sock 316 20mm with Brackets, Black Fabric Sock and Nipple.
4.5kg Fire Extinguisher with Quick Release Mounting Bracket.
High Vis Re�ective Frame Strips on Edges (Class 1).
Two (2) 360º swivel LED Night Work Lights (includes loom, relay and on/off switch).
LED Orange Flashing Hazard Light.
Keyed Lockable Panels with 8 additional Rubber Pull Latches.
Anderson Style Jump Start Recepticle (other options available upon request).
Included Mine Speci�cation Safety Accessories
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
DIESEL ENGINE
APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
RPM
Executive Silent 200 - Dual Operation
HW210-41DTM
InterpumpW2141(Series 47)
3000 200 Per gun =20.5
Perkins 403A-11 (400 Series)
568kg 1100mm (L) x 700mm (W) x 860mm (H)
1500
BURNER VOLTAGE
12V
OUTLETHOT WATERTEMP
30 - 120°C#
FUELCONKG/H
6.55
12 MONTH ENGINE WARRANTY
* DECIBEL READING PERFORMED WITH UNIT MOUNTED ON UTE BED AT A DISTANCE OF 7M WITHOUT GUN ACTIVATION.
** FEATURE PRESENT ON MODEL EXECUTIVE SILENT 250.
# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
DIESEL ENG TANK CAPACITY
WATERTANK CAPACITY
1500L 90L
MINE SPEC
Page 101
MINE SPEC
Page 102
Prof
essi
onal
/ Di
esel
Driv
en
Executive Silent Pack Enclosed Trailer
Frequent Usage
Hot Water
Diesel Powered
Diesel
≈ 66 dB*
Motor & Pump
1500 rpm Standout Features and Bene�ts
3600 or 5000 psi pump working pressure.
21-23 litres per minute water �ow rate.
Perkins 3 or 4 cylinder liquid-cooled electric start engine. > InteliDrive Nano engine management system. - Electronic display. - Automatic shut-off oil pressure. - Automatic temperature. - Fuel shut-off solenoid. > Longer maintenance intervals, low vibration and low noise levels leading to improve all round convenience. > Indirect injection technology, resulting in lower fuel consumption and running costs. > Closed lubrication system with breather.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and/or nickel plated head with easy oil indication sight glass.
Highly ef�cient (>90%) and environmentally friendly low voltage 12 volt DC vertical diesel �red hot water burner system. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior seamless mild steel heating coil. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 120ºC# with quality fuel pump, solenoid valve and transformer. > Ceramic electrodes with double insulated electrode caps.
Superior SOUND PROOF cabinet leading to lower noise emissions resulting in an increased window of operation with considerably less noise disturbance to the community.
Robust zinc annealed powder coated cabinet with removable side covers.
Integrated forklift tyne pockets for easy manoeuvrability and work site placement.
Vibration control protection, via specialised long galvanised motor anti-vibration tray, integrating six dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion.
500 litre UV stabilised water cartage tank: > Integrated low level water engine shut-off for pump/unit protection. > Extra heavy duty impact resistant polyethylene construction. > Purpose built for Australian conditions. > Easy to read calibrations for measuring water content. > Spill containment lip surrounds the lid. > Includes water baf�e to prevent excess water sloshing and trailer imbalances.
One (1) x industrial hose reel �tted with stainless reel roller guides top, bottom and sides �tted with 50m of Jetwave 3/8” double wire braid blue high pressure hose complete with screw type quick coupling.
MINE SPEC
Page 103
One (1) x industrial hose reel with stainless reel roller guides top, bottom and sides �tted with 50m of ¾” low pressure water feed supply hose (includes brass tap snap coupling). > Both reels feature multi-locking points for easy length selection and increased operator safety.
Low pump 1500 rpm running speed equating to 50% less maintenance time and increased reliability.
High capacity easy �ll diesel tank for burner fuel supply.
Easy to maintain diesel fuel �lter with glass bowl for sediment/water separation identi�cation increasing burner reliability and ef�ciency.
Visible illumination switch for burner fan operation.
Sealed and viewable engine control panel.
Resilient maintenance free battery and heavy duty looms.
High quality brass or stainless steel adjustable unloader valve for increased safety and serviceability.
Durable stainless steel pressure gauge with glycerine.
2 inch washable inlet water strainer.
Adjustable detergent injection facility under low pressure complete with detergent tubing and �lter.
High pressure back-up and safety valve.
Low level water for engine cut-out.
Complete operator and maintenance manual.
Standard Accessories Include
Heavy duty gun and dual lance with variable control.
Turbo rotating nozzles and lance and quick coupling.
Two (2) x 360° swivel LED Night Work Lights.
Two (2) x yellow jerry cans in holders.
Trailer Speci�cations and Features
Australian made 10ft (l) x 5ft (w) tandem axle fully enclosed.
Four (4) doors sealed, lockable and gas strutted, 3 gas strutted and rear doorswinging door for easy service maintenance.
Extra-long draw bar (1800mm) for smoother towing and additional storage capacity.
One (1) x lockable mounted aluminium tool/storage box on front draw bar.
Rocker suspension.
Heavy duty C50 square axles
Load rated to 3499kg GTM
Electric brakes with engager breakaway system with battery and test light.
Manual handbrake.
Two (2) adjustable drop-down rear stabiliser legs.
Two (2) wheel chocks mounted on mud guards.
Heavy duty folding jockey wheel.
Four (4) 8 ply light truck tyres with white powder coated steel rims.
One (1) spare wheel.
Quality multi volt maintenance free LED rear lights with two (2) side lights.
Yellow wheel indicators.
Extra long safety chains with two (2) certi�ed D Shackles.
50mm tow ball hitch with option to upgrade to the ring pull style hitch (6 tonne rated) (optional).
Three (3) months registration.* (NB: This is at an additional cost and may be subject to change depending on the particular state/territory).
Executive Silent Pack Enclosed Trailer
Page 104
Warranty
12 month manufacturer’s build, pump and gearbox warranty. CONDITIONS APPLY
5 year water tank warranty.
Complete ‘Turbo’ Head with Stainless Steel Lance.
‘MR-O’ Brass or Stainless Steel High Pressure Swivel.
Industrial High Pressure Hose Reel with 30m or 60m capacity, including leader hose.
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
Safety Equipment Pack: PPE including Hard Hats, First Aid Kit, 2 x High Visibility Vests, 4 x Hazard Cone.
Optional Extra Accessories
120 litre Bunded Oil Tray for Engine/Pump
Low Voltage Control Burner (for user safety).
Heavy Duty Battery (Red) Isolator Lockout Switch.
Heavy Duty Starter (Yellow) Isolator Lockout Switch.
Emergency Stop Shut-down Button.
‘Danger Keep Clear When High Pressure Water Jetter is in Operation’ Warning Fold Out Sign.
Over Pressure Pump Relief Valve.
Control Mechanisms - One (1) High Pressure Ball Valve (machine shut off) and One (1) Hand Piece On/Off (trigger gun operation).
One (1) Certi�ed Hose Restraint Sock 316 20mm with Brackets, Black Fabric Sock and Nipple.
One (1) 4.5kg Fire Extinguisher with Quick Release Mounting Bracket.
High Vis Re�ective Frame Strips on Edges (Class 1).
Two (2) 360º swivel LED Night Work Lights (includes loom, relay and on/off switch).
LED Orange Flashing Hazard Light.
Keyed Lockable Panels with 8 additional Rubber Pull Latches.
Anderson Style Jump Start Recepticle (other options available upon request).
Included Mine Speci�cation Safety Accessories
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE L/PM
DIESEL ENGINE
APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
RPM
Executive Silent Enclosed 250
HW250-21DTME
InterpumpW3021(Series 66)
3600 250 21 Perkins 403A-11 (400 Series)
1750kg 5000mm (L) x 2120mm (W) x 2200mm (H)
1500
BURNER VOLTAGE
12V
OUTLETHOT WATERTEMP
30 - 120°C#
FUELCONKG/H
6.55
12 MONTH ENGINE WARRANTY
* DECIBEL READING PERFORMED WITH UNIT MOUNTED ON UTE BED AT A DISTANCE OF 7M WITHOUT GUN ACTIVATION.
** FEATURE PRESENT ON MODEL EXECUTIVE SILENT 250.
# MAXIMUM HOT WATER OUTLET TEMPERATURE WILL VARY UPON ADJUSTMENT OF WATER FLOW RATE.
DIESEL ENG TANK CAPACITY
WATERTANK CAPACITY
1500L 90L
MINE SPEC
Executive Silent Enclosed 350
HW350-23DTME
InterpumpW3523(HP Series 66)
5000 350 23 Perkins 404D-22 (400 Series)
1815kg 5000mm (L) x 2120mm (W) x 2200mm (H)
1500 12V 30 - 120°C# 6.551500L 90L
Page 105
MINE SPEC
Page 106
Jetwave’s quality Italian made range of heavy duty wet and dry vacuum cleaners are ‘built to last’. They are purpose built to �t the customer’s speci�c cleaning application on the work site or in the workplace. Our vacuum models have displayed continual toughness and dependability in various trades and industries.
Additionally, our range of professional extraction vacuum cleaners will complement any upholstery / carpet cleaning business or job at hand.
Ideal for the following applications and industries:• Hire and rental companies• Of�ce buildings and retail stores• Hotels / apartments maintenance• Car dealerships, car cleaning and
detailing• Building and concrete industry• Civil construction industry• Factory, workshops and warehouse
maintenance• Aviation industry• General trade and maintenance• Cleaning contractors
Page 107
Industrial Vacuum C
leaners
Page 108
Whether you’re tackling a wet or dry �oor, Jetwave has a heavy duty vacuum cleaner to power through the job with ease. Several functional models featuring corrosion-resistant stainless steel or polyethylene holding tanks, deliver industrial strength suction for all the power you’ll need in the workplace.
Jetwave wet and dry vacuum cleaner models 215 and 515 are designed for various professional applications such as hotels / apartments, garages, factories, car washes and retail stores for �xed �oor carpet cleaning capabilities.
For heavy duty applications such as construction and work site demands, Jetwave models 640 and 640/200 will handle the eradication of dust, water and various debris with ease.
For high end industrial use in the hire and rental market our genuine Italian made vacuum cleaners surpass the opposition in terms of reliability and robustness.
The standard features of all Jetwave models include a sani�lter nanotechnology antimicrobial cloth �lter bag, front castor wheels for easy mobility, UV shock resistant head, industrial twin fan motor(s) and a long electrical power cable.
All models are supplied with the attachments you’ll need for most jobs as standard. There’s also a range of versatile optional accessories.
Sensibly priced to suit all budgets, Jetwave’s wet and dry vacuum cleaners are built tough to last and feature full service and world-wide spare parts back-up.
Wet and Dry IndustrialVacuum CleanersRobust and reliable operation plus loads of power to whiz through the toughest vacuuming job!
Prof
essi
onal
/ In
dust
rial V
acuu
m C
lean
ers
QUALITY ITALIANMADE
Page 109
Standard Speci�cations and Features
1 to 3 industrial twin fan brush-type motor with by-pass cooling and low noise levels.
24 to 107L heavy duty stainless steel / polyethylene holding tank. 200L powder coated steel drum model 640/200.
UV and shock-resistant plastic head.
Motor protection via �oat system.
Sani�lter and antimicrobial cloth �lter bag technology.
Easy to clean and washable �lter bag.
Ergonomic handle with convenient air�ow stopper.
Quality crush proof hose on all models.
2-stage cleat for easy removal of top head.
High-impact plastic base on models 215 to 640.
Easy to lift handles on tank.*
Removable tank attached to main trolley via cleats.*
Contents effortlessly drained via main trolley tipping capability.*
Heavy duty front castor wheels for easy mobility.*
Quick drain back hose on model 440/90.
Optional large 50mm tooling for model 440(s), 629 and 640(s).
640/200 model more robust with fully welded and hot dipped galvanised constructed trolley frame including powder coated steel drum.
Long 9m power supply lead on models 440(s), 629 and 640(s).
Option for HEPA type �ltration to remove 99.9% of particles (part no. 2995).*
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Wet and Dry Range
215
515
629
640
640/200
440/90
440/107
10301
10302
10303
10304
10304/2
10306
10307
1200
1200
2400
3600
3600
3600
3600
Wet and Dry
Wet and Dry
Wet and Dry
Wet and Dry
Wet and Dry
Wet and Dry
Wet and Dry
MODEL PRODUCT CODE
MOTORWATTS
MOTOR WATTS NO.
TANK CAPACITY
VOLTS APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
OPTIONAL TOOLING AVAILABLE
AIR FLOW (m3/h)
STANDARD TOOLING/ HOSE LENGTH
APPLICATION
1
1
2
3
3
3
3
200
200
400
600
600
630
630
24
32
63-78
63-78
200
90
107
WATERLIFT (mm)
2550
2550
2550
2550
2550
2470
2470
220-240
220-240
220-240
220-240
220-240
220-240
220-240
36mm / 2m
38mm / 3m
38mm / 5m
38mm / 5m
38mm / 10m
38mm / 2.5m
38mm / 2.5m
No
No
Yes
Yes
Yes
Yes
Yes
12kg
12kg
24kg
32kg
65kg
25kg
31kg
390mm (L) x 390mm (W) x 620mm (H)
400mm (L) x 400mm (W) x 730mm (H)
420mm (L) x 420mm (W) x 700mm (H)
430mm (L) x 430mm (W) x 830mm (H)
600mm (L) x 600mm (W) x 960mm (H)
640mm (L) x 600mm (W) x 1050mm (H)
600mm (L) x 600mm (W) x 960mm (H)
640mm (L) x 600mm (W) x 1050mm (H)
850mm (L) x 750mm (W) x 1450mm (H)
860mm (L) x 760mm (W) x 1200mm (H)
550mm (L) x 450mm (W) x 920mm (H)
620mm (L) x 500mm (W) x 960mm (H)
565mm (L) x 630mm (W) x 1070mm (H)
690mm (L) x 580mm (W) x 1140mm (H)
Standard Tooling
Optional Tooling
36Omm
38Omm
50Omm
38Omm
0090
50100
6158
6240
0632
2720
0004
0616 0617
6386
6389
6387
50200
0083
0003 6295 6388
50300
0084
2773 2367
2364 (3 pieces)
0513
0517 0516
05140518
6386
6385/50
2995 2852
2855
0039
3200 (2 pieces)
0041
0042
* FEATURE PRESENT ON MODEL 629 UPWARDS.
Model 440/90 Model 640/200
OPTIONAL TOOLING AVAILABLE
No
No
Yes
Yes
Yes
Yes
Yes
Page 110
With Jetwave’s Rio and Storm extraction vacuum cleaners stained and dirty carpets or upholstery are a thing of the past. Our robust and reliable Italian built cleaners are designed for the injection and extraction of cleaning detergents. Simply use the extractor to spray solution into your carpet or upholstery, where it loosens surface dirt and deep-down grime. As the powerful suction lifts the solution from the carpet, out comes every speck of dirt returning it to pristine condition.
With Jetwave’s Storm extraction cleaner you don’t pay for accessories you’ll never use. It comes with a hose as standard, then simply choose the optional attachments you need from our large selection.
With the Rio model all accessories are included as standard. It is light weight, with a tank capacity of 32 litres, making it a perfect addition for any small business or cleaning contractor. Our Storm model, with double the tank capacity, is purpose built for larger applications.
Both models will complement your business saving you time and money. Various applications and industries include hotels and apartments, pubs and restaurants, retail stores, of�ce buildings, car detailers and the aviation industry.
Sensibly priced to suit all budgets, Jetwave’s extraction vacuum cleaners are built tough to last and feature full service and world-wide spare parts back-up.
Extraction Industrial Vacuum CleanersDirty and sticky carpets or upholsteries are history with our range of extraction vacuum cleaners!
Prof
essi
onal
/ In
dust
rial V
acuu
m C
lean
ers
QUALITY ITALIANMADE
Page 111
Standard Speci�cations and Features Industrial twin fan brush-type motor with by-pass cooling and low noise levels.
32 - 60 litre heavy duty stainless steel holding tank.
UV and shock-resistant plastic head.
Stainless steel snap-on solution hose �ttings.
Motor protection via �lter �oat system.
Long 8 metre power supply lead.
Quality crush proof hose with integrated solution line.
2-stage cleat for easy removal of top head.
High-impact plastic base.
Heavy duty polyethylene solution holding tank with pick-up �lter.
Visible illumination switch for motor* and solution pump operation.
Easy to lift handles on tank* and head.
Sani�lter and antimicrobial cloth �lter bag technology.*
Easy to clean and washable �lter bag.*
Heavy duty front castor wheels for easy mobility.*
Quick drain front hose on holding tank.*
Electrical socket for (optional) power brush head.*
Option for HEPA type �ltration to remove 99.9% of particles (part no. 2995).*
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Extraction Range
36Omm
Rio Optional Dry Tooling
36Omm
38Omm
0090
50100
6158
6240
0632
2720
0004
0616 0617
6386
6389
6387
50200
0083
0003 6295 6388
0084
Storm Optional Dry Tooling
6385
Rio Standard Accessories
Storm Optional Accessories
36Omm
38Omm
36Omm
38Omm
Rio
Storm
10311
10315
1200
2400
ExtractionWet and Dry
ExtractionWet and Dry
MODEL PRODUCT CODE
MOTORWATTS
MOTOR WATTS NO.
TANK CAPACITY
VOLTS APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
STANDARD TOOLING/HOSE LENGTH
AIR FLOW (m3/h)
APPLICATION
1
2
210
420
32
60
WATERLIFT (mm)
2470
2470
240
240
36mm / 4.5mm
38mm / 6m
18kg
37kg
420mm (L) x 420mm (W) x 700mm (H)
430mm (L) x 550mm (W) x 830mm (H)
670mm (L) x 630mm (W) x 930mm (H)
730mm (L) x 650mm (W) x 950mm (H)
MAX TEMP
50°C
50°C
LIQUID FLOW (lt/min)
0.8
1.8
SOLUTION (Litres)
11
25
0752 Hard Floor Squeegee Tool
2725
6407 (Twin Jet)
6406 (Twin Jet)
0752
2995 2855
STORM MODEL
* FEATURE PRESENT ON STORM MODEL.
Page 112
Jetwave’s range of drain cleaning /hydro-jetting equipment are built, and designed, to the highest degree of quality and reliability in order to provide the best solution for plumbers and drain cleaning specialists.
Our machines are long proven in the �eld, and deliver where it counts, as they are capable of removing the toughest blockages. This equipment will further complement your plumbing business and help to guarantee more jobs.
We have a model to �t your needs with a choice of petrol, diesel or electric powered models with various frames or mounting arrangements to choose from.
Ideal for use in the following industries and effective in the eradication of:• Grease, sludge and dirt removal• Tree roots and various debris removal• Plumbing businesses and contractors• Municipalities contractors• State and local councils • Pipe laying and inspection
businesses.
Page 113
Drain C
leaning / H
ydro-jetting Equipm
ent
Page 114
Visible illumination switch for unit operation.
Standard Accessories Include
10m of 3/16” thermo plastic water jetting hose with brass quick coupling and stainless steel micro drain nozzle.
8m 1/4” wire braid high pressure hose (includes quick release coupling system).
Ergonomic heavy duty spray gun with back part lance and quick coupling connector.
Front part lance featuring multi-regulated nozzle with adjustable spray fan and high / low pressure adjustment.
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
Quicky Drain CleanerStandout Features and Bene�ts
Unit supplied by the world’s largest manufacturer of high pressure piston plunger pumps - Interpump.
Fully adjustable integral brass unloader valve for increased cleaning �exibility.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Strong upheld unit design based around longevity and easier maintenance schedule.
Robust grip handle for easy mobility.
Quality induction IPX5 electric motor with thermal protection.
DRAIN CLEANING KIT OPTIONAL DRAIN CLEANING NOZZLES FOR ILLUSTRATION PURPOSES ONLY
Page 115
1300 psi pump working pressure.
8 litres per minute water �ow rate.
Professional Interpump ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
2800 rpm pump running speed.
Accurate pressure gauge.
Easy to remove and clean in-line water inlet �lter.
Low pressure adjustable �ow detergent facility complete with tubing and pick-up �lter.
Pump directly coupled to hollow shaft electric motor.
High pressure hose quick release coupling system.
Brass corrosion proof inlet and outlet connection �ttings.
Removable polyethylene plastic cover / shroud.
Sturdy metal feet with rubber pads.
2.5m power supply lead with 10 amp plug.
Complete operator and maintenance manuals.
Quicky Drain CleanerStandard Speci�cations and Features
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
8 2800
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR LP/M
ELECTRIC MOTOR KW / POLE / Hz / VOLT / PHASE
RPM APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Interpump(Series 51)
FLOW RATE
QuickyDrain Cleaner
00108 1300 90 2.2KW / 2 / 50Hz / 240v / Single 26kg 400mm (L) x230mm (W) x260mm (H)
420mm (L) x300mm (W) x310mm (H)
MAX INLETTEMP
60°C
Sandkit, Sandblasting Kit.
Thermal Valve for By-pass Pump Protection.
Optional Extra Accessories
1
2
DRAIN CLEANING KIT
Page 116
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
Scorpion JuniorStandout Features and Bene�ts
Genuine Honda GX390 petrol engine.
> Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> OHV design for increased ef�ciency and optimal power transfer.
> Integrated low level oil cut-out protection system.
> Automatic mechanical de-compression system.
> Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel ef�ciency.
Tough and robust fully welded hot dipped galvanised roll frame with convenient gun and lance holder.
Strong upheld unit design based around longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Quality unparalleled industry proven ‘Italian’ pump and gearbox components.
Built with only recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised galvanised motor anti-vibration tray control technology to eliminate frame distortion and / or damage.
Standard Accessories Included
60 metres of 1/4” thermo plastic hose with �ttings and stainless steel snap coupling.
Ergonomic heavy duty spray gun with back part lance and quick coupling connector and stainless steel snap-on tail.
Stainless steel dual lance with variable pressure control complete with nozzles.
Quality 7-piece nozzle kit including penetrator, reverse turbo spinning ‘root ranger’, �ushing nozzle, 1 x spanner nozzle removal tool, root extension bar, nozzle blocking tool and carry box.
SUITABLE FOR UP
TO 90mm DRAINS
FOR ILLUSTRATION PURPOSES ONLY.
SHOWN WITH OPTIONAL REMOTE MINI REEL.
Page 117
Standard Speci�cations and Features
4000 psi pump working pressure.
15 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with oil indication sight glass.
1450 rpm pump running speed via directly coupled 2:1 reduction gearbox with oil indication sight glass.
Integrated 6.1 litre fuel supply tank.
Industrial strength fully welded and hot dipped galvanised frame with integrated hose reel mounting plate for added safety.
Maintenance free battery with charge indicator and heavy duty looms.
Heavy duty carbon steel high pressure block body ball valve with a quality extra long anodised red handle.
Robust industrial high pressure hose reel featuring multi-locking points for easy length selection to increase operator safety.
High pressure back up safety relief valve.
Brass ‘Y’ stainless steel water inlet strainer.
14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX engine warranty.
Complete ‘Turbo’ Head with Stainless Steel Lance.
PW134-RRCMPL Remote Mini Reel Package includes 60m of 1/4” Thermo Plastic Hose Complete with Snap Coupling, Ball Valve, Pressure Gauge and a Stainless Steel Frame.
Original USA made Spinning Warthog Nozzle.
20m of 3/16” Piranha Thermo Plastic Whip Hose.
Lances of Different Lengths.
Optional Extra Accessories
1
2
3
4
Scorpion Junior
1 2
3
4
11 10 8 9
MODEL
Scorpion Junior 275
PRODUCT CODE
HP275-15SJ
PUMP
Annovi Reverberi(AR) RK15.28(Series 228)
WORKING PRESSURE PSI BAR
4000 275
FLOW RATEL/PM
15
PETROL ENGINE
Honda GX390
APPROX WEIGHT (UNIT ONLY)
88kg
MACHINE DIMENSIONS
1100mm (L) x 700mm (W) x 860mm (H)
BOXED DIMENSIONS
970mm (L) x 600mm (W) x 670mm (H)
MAX INLETTEMP
60°C
RPM
1450
Page 118
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
Scorpion Lite
NEW & IMPROVED
Standout Features and Bene�ts
Honda GX690 electric start petrol V-Twin engine.
> Higher horsepower, quieter and greater fuel ef�ciency.
> Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> Built-in hour meter and low level oil indicator light for easy service tracking.
> Integrated low level oil cut-out protection system.
Tough and robust fully welded hot dipped galvanised roll frame with stainless steel water tank.
Easy to use unit designed for longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Quality industry proven ‘Italian’ pump and gearbox.
Built with recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised long galvanised motor anti-vibration technology integrating six tray dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion and / or damage.
Standard Accessories Include
60 metres of 3/8” thermo plastic hose with �ttings and stainless steel snap coupling.
Ergonomic heavy duty spray gun with back part lance, quick coupling connector and stainless steel snap-on tail.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel lance complete with soft trigger spray gun and stainless steel snap-on tail and nozzle.**
Quality 7-piece nozzle kit including penetrator, reverse turbo spinning ‘root ranger’, �ushing nozzle, 1 x spanner nozzle removal tool, root extension bar, nozzle blocking tool and carry box.
SHOWN WITH OPTIONAL REMOTE MINI REEL AND WARTHOG NOZZLE.
Page 119
Complete ‘Turbo’ Head with Stainless Steel Lance.
PW134-RRCMPL Remote Mini Reel Package includes 60m of 1/4” Thermo Plastic Hose Complete with Snap Coupling, Ball Valve, Pressure Gauge and a Stainless Steel Frame.
Original USA made Spinning Warthog Nozzle.
20m of 3/16” Piranha Thermo Plastic Whip Hose.
Low Level Water Engine Cut Out for Pump Protection.
Lances of Different Lengths.
Foam Filled Puncture Proof Wheels.
Standard Speci�cations and Features
4060 or 5100 psi pump working pressure.
21 or 26 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with oil indication sight glass.
1450 rpm pump running speed via directly coupled 2:1 reduction gearbox with oil indication sight glass.
Stainless steel supply and by-pass water tank for pump protection including quality Jobe �oat valve.
20 litre fuel supply tank.
Industrial strength fully welded and hot dipped galvanised frame with integrated hose reel mounting plate for added safety.
Extra pump support via rubber foot mounts.
Maintenance free battery with charge indicator and heavy duty looms.
Heavy duty carbon steel high pressure block body ball valve with a quality extra long anodised red handle.
Robust industrial high pressure hose reel with 60m (3/8”) capacity featuring multi locking points for easy length selection to increase operator safety.
High pressure back up safety relief valve.**
Brass ‘Y’ stainless steel water inlet strainer.
14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX engine warranty.
Scorpion Lite
Optional Extra Accessories
1
2
3
4
1 2
3
4
MODEL
Scorpion Lite 280
PRODUCT CODE
HP280-26SL
PUMP
Annovi Reverberi(AR) XW26.28N(Series 194)
WORKING PRESSURE PSI BAR
4060 280
FLOW RATEL/PM
26
PETROL ENGINE
Honda GX690
APPROX WEIGHT (UNIT ONLY)
175kg
MACHINE DIMENSIONS
1090mm (L) x 700mm (W) x 1280mm (H)
BOXED DIMENSIONS
1100mm (L) x 600mm (W) x 820mm (H)
Scorpion Lite 350
HP350-21SL Annovi Reverberi(AR) SXW21.35N(Series 194)
5100 350 21 Honda GX690 175kg 1090mm (L) x 700mm (W) x 1280mm (H)
1100mm (L) x 600mm (W) x 820mm (H)
MAX INLETTEMP
60°C
60°C
RPM
1450 via Interpump RS500 Gearbox
1450 via Interpump RS500 Gearbox
* FEATURE PRESENT ON SCORPION LITE MODEL 280.
** FEATURE PRESENT ONLY ON SCORPION LITE MODEL 350.
Page 120
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
ScorpionStandout Features and Bene�ts
Vanguard Briggs & Stratton 27 HP or 31 HP electric start petrol air cooled V-Twin BIG BLOCK engine.
> Innovative intake and exhaust system results in a quieter running engine.
> Advanced Debris Management System features easy clean access prolonging engine life.
> 5 inch cyclonic industrial Donaldson air �lter.
> Dual ball bearing supported crankshaft.
Tough and robust fully welded hot dipped galvanised roll frame with stainless steel water and fuel tanks.
Easy to use unit designed for longevity, easier maintenance schedule, improved ef�ciency and increased operator safety.
Quality industry proven ‘Italian’ pump and gearbox.
Built with recognised highest quality components supported by world-wide spare parts back-up.
Solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised long galvanised motor anti-vibration technology integrating six tray dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion and / or damage.
Standard Accessories Include
60 metres of 3/8” thermo plastic hose with �ttings and stainless steel snap coupling.
Ergonomic heavy duty spray gun with back part lance, quick coupling connector and stainless steel snap-on tail.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel lance complete with soft trigger spray gun and stainless steel snap-on tail and nozzle.**
Quality 7-piece nozzle kit including penetrator, reverse turbo spinning ‘root ranger’, �ushing nozzle, 1 x spanner nozzle removal tool, root extension bar, nozzle blocking tool and carry box.
PREMIUM MODEL
Page 121
Standard Speci�cations and Features
3045 to 5100 psi pump working pressure.
21 to 41 litres per minute water �ow rate.
Professional Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass and / or nickel plated head with oil indication sight glass.
1450 / 1750 rpm pump running speed via directly coupled
2:1 reduction gearbox with oil indication sight glass.
Stainless steel supply and by-pass water tank for pump protection including quality Jobe �oat valve.
Stainless steel fuel supply tank.
Industrial strength fully welded and hot dipped galvanised frame with three integrated hose reel mounting plates for added safety.
Extra pump support via rubber foot mounts.
Maintenance free battery with charge indicator and heavy duty looms.
Heavy duty carbon steel high pressure block body ball valve with a quality extra long anodised red handle.
Robust industrial high pressure hose reel with 60m (3/8”) capacity featuring multi locking points for easy length selection to increase operator safety.
High pressure back up safety relief valve.**
Brass ‘Y’ stainless steel water inlet strainer.
14” heavy duty pneumatic wheels for easy mobility.
Durable stainless steel pressure gauge with glycerine.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Briggs & Stratton 3 year global commercial engine warranty.
Scorpion
Complete ‘Turbo’ Head with Stainless Steel Lance.
PW134-RRCMPL Remote Mini Reel Package includes 60m of 1/4” Thermo Plastic Hose Complete with Snap Coupling, Ball Valve, Pressure Gauge and a Stainless Steel Frame.
Original USA made Spinning Warthog Nozzle.
20m of 3/16” Piranha Thermo Plastic Whip Hose.
Engine Hour Meter and Tachometer for Service Tracking.
Upgrade to 31HP Briggs & Stratton Engine.
Low Level Water Engine Cut Out for Pump Protection.
Lances of Different Lengths.
Foam Filled Puncture Proof Wheels.
Optional Extra Accessories
1
2
3
4
1
2
3
54
5
11 10 8 9
RMODEL PRODUCT
CODE PUMP WORKING
PRESSURE PSI BAR
FLOW RATE L/PM
PETROL ENGINE
APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
MAX INLETTEMP
RPM
Scorpion 280
HP280-30S InterpumpT2830(66 Series)
4060 280 30 200kg 1160mm (L) x 720mm (W) x 1390mm (H)
1250mm (L) x 650mm (W) x 1400mm (H)
60°C 1750 via Interpump RS500 Gearbox
Scorpion 350
HP350-21S Annovi Reverberi(AR) SXW 21.35(Series 194)
5100 350 21 200kg 1160mm (L) x 720mm (W) x 1390mm (H)
1250mm (L) x 650mm (W) x 1400mm (H)
60°C 1450 via Interpump RS500 Gearbox
* FEATURE PRESENT ON SCORPION MODELS 210 & 280.
** FEATURE PRESENT ONLY ON SCORPION MODEL 350.
Briggs & Stratton 27 HP
Briggs & Stratton 27 HP
Page 122
Solid brass adjustable unloader valve for increased safety, unit longevity and serviceability.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Specialised long galvanised motor anti-vibration technology integrating six tray dampeners and pump rubber foot mounts to eliminate potential frame and engine crankshaft distortion and / or damage.
Standard Accessories Include
60 metres of 3/8” thermo plastic hose with �ttings and stainless steel snap coupling.
30 metres 3/4” black reinforced low pressure water supply hose with brass snap on tap �ttings.
Ergonomic heavy duty spray gun with back part lance, quick coupling connector and stainless steel snap-on tail.*
Stainless steel dual lance with variable pressure control complete with nozzles.*
Single stainless steel lance complete with soft trigger spray gun and stainless steel snap-on tail and nozzle.**
Quality 7-piece nozzle kit including penetrator, reverse turbo spinning ‘root ranger’, �ushing nozzle, 1 x spanner nozzle removal tool, root extension bar, nozzle blocking tool and carry box.
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
Van PackStandout Features and Bene�ts
Vanguard Briggs & Stratton 27HP or 31HP electric start petrol air cooled V-Twin BIG BLOCK engine.
> Innovative intake and exhaust system results in a quieter running engine.
> Advanced Debris Management System features easy clean access prolonging engine life.
> 5 inch cyclonic industrial Donaldson air �lter.
> Dual ball bearing supported crankshaft.
or
Honda GX690 electric start petrol V-Twin engine.
> Higher horsepower, quieter and greater fuel ef�ciency.
> Green and Gold approved and engine matched tested for Australian conditions and compliance laws.
> Built-in hour meter and low level oil indicator light for easy service tracking.
> Integrated low level oil cut-out protection system.
Speci�cally designed for van mounting arrangements incorporating tough and robust fully welded hot dipped galvanised frame with stainless steel water and fuel tanks.
Quality industry proven ‘Italian’ pump and gearbox.
Built with recognised highest quality components supported by world-wide spare parts back-up.
NEWPurpose Built
Van Mount
Page 123
Standard Speci�cations and Features
4000 to 5075 psi pump working pressure.
23 to 30 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 / 1750 rpm pump running speed via directly coupled 2:1 reduction gearbox with oil indication sight glass.
Stainless steel supply and by-pass water tank for pump protection including quality Jobe �oat valve.
Easy �ll stainless steel fuel supply tank.
Speci�cally designed industrial strength fully welded and hot dipped galvanised frame.
Extra pump support via rubber foot mounts.
Maintenance free battery with charge indicator and heavy duty looms.
Heavy duty carbon steel high pressure block body ball valve with a quality extra long anodised red handle.
Two robust industrial high / low pressure hose reels featuring multi locking points for easy length selection to increase operator safety.
High pressure back up safety relief valve.**
Brass ‘Y’ stainless steel water inlet strainer.
Durable stainless steel pressure gauge with glycerine.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Complete operator and maintenance manuals.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Briggs & Stratton 3 year global commercial engine warranty.
Honda Green & Gold tested and approved 3 year GX engine warranty.
Van Pack
* FEATURE PRESENT ONLY ON MODEL VAN PACK 280-30 DOWNWARDS.
** FEATURE PRESENT ONLY ON MODEL VAN PACK 350.
11 10 8 9
MODEL PRODUCT CODE
PUMP WORKING PRESSURE PSI BAR
FLOW RATE
PETROL ENGINEOPTIONS
APPROX WEIGHT (UNIT ONLY)
MACHINE DIMENSIONS
BOXED DIMENSIONS
Van Pack280-26
HP280-26VP Annovi Reverberi(AR) XW26.28N(Series 194)
4060 280 26 Honda GX690
280kg 1000mm (L) x 1100mm (W) x 1050mm (H)
1010mm (L) x 1110mm (W) x 1060mm (H)
MAX INLETTEMP
60°C
RPM
1450 via InterpumpRS500 Gearbox
Van Pack 280-30
HP280-30VP InterpumpT2830(66 Series)
4060 280 30 Briggs &Stratton27HP
280kg 1000mm (L) x 1100mm (W) x 1050mm (H)
1010mm (L) x 1110mm (W) x 1060mm (H) )
60°C 1750 via Interpump RS500 Gearbox
Van Pack350
HP350-23VPBorHP350-23VPH
InterpumpW3523(66 HP Series)
5075 350 23 Honda GX690
280kg 1000mm (L) x 1100mm (W) x 1050mm (H)
1010mm (L) x 1110mm (W) x 1060mm (H)
60°C 1450 via InterpumpRS500 Gearbox
Briggs &Stratton27HP
n/a
1 2
3
54
VAN PACK 350
Complete ‘Turbo’ Head with Stainless Steel Lance.
PW134-RRCMPL Remote Mini Reel Package includes 60m of 1/4” Thermo Plastic Hose Complete with Snap Coupling, Ball Valve, Pressure Gauge and a Stainless Steel Frame.
Original USA made Spinning Warthog Nozzle.
20m of 3/16” Piranha Thermo Plastic Whip Hose.
Engine Hour Meter and Tachometer for Service Tracking (Briggs & Stratton model only).
Upgrade to 31HP Briggs & Stratton Engine.
Low Level Water Engine Cut Out for Pump Protection.
Lances of Different Lengths.
Optional Extra Accessories
1
2
3
4
5
n/a
Page 124
200 litre UV stabilised water cartage tank: > Extra heavy duty impact resistant polyethylene > Purpose built for Australian conditions. > Read calibrations for measuring water content. > Includes water baf�e to prevent excess water sloshing and trailer imbalances. > Quick drain ball valve.
Two robust industrial high / low pressure hose reels featuring multi-locking points for easy length selection to increase operator safety.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Standard Accessories Include
60 metres of 3/8” thermo plastic hose with �ttings and stainless steel snap coupling.
30 metres 3/4” black reinforced low pressure water supply hose with brass snap on tap �ttings.
Ergonomic heavy duty Italian wash down spray gun.
Quality 7-piece nozzle kit including penetrator, reverse turbo spinning ‘root ranger’, �ushing nozzle, 1 x spanner nozzle removal tool, root extension bar, nozzle blocking tool and carry box.
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
Scorpion Lite TrailerStandout Features and Bene�ts
Vanguard Briggs & Stratton 27HP or 31HP electric start petrol air cooled V-Twin BIG BLOCK engine. > Innovative intake and exhaust system results in a quieter running engine. > Advanced Debris Management System features easy clean access prolonging engine life. > 5 inch cyclonic industrial Donaldson air �lter. > Dual ball bearing supported crankshaft.
or
Honda GX690 electric start petrol V-Twin engine. > Higher horsepower, quieter and greater fuel ef�ciency. > Green and Gold approved and engine matched tested for Australian conditions and compliance laws. > Built-in hour meter and low level oil indicator light for easy service tracking. > Integrated low level oil cut-out protection system.
Professional Interpump or Annovi Reverberi Italian triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication site glass.
Durable stainless steel pressure gauge with glycerine.
20 litre easy �ll universal fuel supply tank.
Draw bar mounted lockable mounted aluminium tool / storage box.
NEW
Page 125
Standard Speci�cations and Features
4000 or 5000 psi pump working pressure.
23 or 30 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 / 1750 rpm pump running speed via directly coupled 2:1 reduction gearbox with oil indication sight glass.
Stainless steel supply and by-pass water tank for pump protection including quality Jobe �oat valve.
Extra pump support via rubber foot mounts.
Maintenance free battery with charge indicator and heavy duty looms.
Heavy duty carbon steel high pressure block body ball valve with a quality extra long anodised red handle.
High pressure back up safety relief valve.**
Brass ‘Y’ stainless steel water inlet strainer.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Complete operator and maintenance manuals.
Note
State and territory laws and company speci�c regulations will vary. Therefore it’s the client’s responsibility to correspond with the appropriate authorities to ensure all requirements are met. Enquire for details and to discuss speci�c needs and applicable provisions.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Briggs & Stratton 3 year global commercial engine warranty.
Honda Green & Gold tested and approved 3 year GX engine warranty.
Scorpion Lite Trailer
11 10 8
9
MODEL
Scorpion Lite 280-30
PRODUCT CODE
HP280-30SLTB
PUMP
InterpumpT2830 (66 HP Series)
WORKING PRESSURE PSI BAR
4000 280
FLOW RATE
30
PETROL ENGINEOPTIONS
Briggs &Stratton31HP
APPROX WEIGHT (UNIT ONLY)
600kg
MACHINE DIMENSIONS
4200mm (L) x 2100mm (W) x 1700mm (H)
Scorpion Lite 350-23
HP350-23SLTH InterpumpW3523 (66 HP Series)
5000 350 23 Honda GX690
600kg 4200mm (L) x 2100mm (W) x 1700mm (H)
MAX INLETTEMP
60°C
60°C
RPM
1750 via Interpump RS500 Gearbox
1450 via InterpumpRS500 Gearbox
n/a
n/a
1
2
3
4
PW134-RRCMPL Remote Mini Reel Package includes 60m of 1/4” Thermo Plastic Hose Complete with Snap Coupling, Ball Valve, Pressure Gauge and a Stainless Steel Frame.
Original USA made Spinning Warthog Nozzle.
15m of 3/16” Thermo Plastic Whip Hose.
Engine Hour Meter and Tachometer for Service Tracking (Briggs & Stratton model only).
Upgrade to Briggs & Stratton Engine.
Optional Extra Accessories
1
2
3
4
Trailer Speci�cations and Features
Purpose built hydro-jetting / drain cleaning trailer.
6” x 4” single axle galvanised �at deck with mudguards.
Tough duragal RHS chassis construction.
Seven (7) leaf spring slipper suspension.
Heavy duty 45mm square single axle with heavy duty bearings.
Load rated to 137kg.
Extra long draw bar for smoother towing and additional storage capability.
Two (2) adjustable drop-down rear stabiliser legs.
White ranger rims with 8ply tyres.
One (1) spare wheel.
Mechanical assisted disc brakes with manual hand brake.
Twelve (12) months registration.* (Note: this is at an additional cost and may be subject to change depending on the particular state / territory).
Optional Safety Equipment
One (1) mounted 4.5kg ABE powder type �re extinguisher for A Class - Solids, B Class - Liquids and E Class - Electrical �res.
Trained Personnel Only operation warning sign.
Two (2) warning safety cones.
Additional Safety Equipment pack:> PPE including: hard hats, hi-visibility vests, witches hats / hazard cones, safety sign, �rst aid kit, earmuffs and eye protection.
Page 126
300 litre UV stabilised water cartage tank: > Extra heavy duty impact resistant polyethylene > Purpose built for Australian conditions. > Read calibrations for measuring water content. > Includes water baf�e to prevent excess water sloshing and trailer imbalances. > Quick drain ball valve.
Two (2) extra heavy duty hose reels with 100m of 3/8” high pressure hose and 30 metres of 3/4” low pressure hose featuring: 24 locking point, stainless steel guide rollers, quality swivel with easy grease point access, dual heavy duty bearings and hand crank.
Professional low pump running speed equating to 50% less maintenance time and increased reliability.
Standard Accessories Include
120 metres of 3/8” thermo plastic hose with �ttings and stainless steel snap coupling.
30 metres 3/4” black reinforced low pressure water supply hose with brass snap on tap �ttings.
Ergonomic heavy duty Italian wash down spray gun.
Quality 7-piece nozzle kit including penetrator, reverse turbo spinning ‘root ranger’, �ushing nozzle, 1 x spanner nozzle removal tool, root extension bar, nozzle blocking tool and carry box.
Prof
essi
onal
/ Hy
dro-
jetti
ng D
rain
Cle
aner
Scorpion TrailerStandout Features and Bene�ts
Vanguard Briggs & Stratton 27HP or 31HP electric start petrol air cooled V-Twin BIG BLOCK engine. > Innovative intake and exhaust system results in a quieter running engine. > Advanced Debris Management System features easy clean access prolonging engine life. > 5 inch cyclonic industrial Donaldson air �lter. > Dual ball bearing supported crankshaft.
or
Honda GX690 electric start petrol V-Twin engine. > Higher horsepower, quieter and greater fuel ef�ciency. > Green and Gold approved and engine matched tested for Australian conditions and compliance laws. > Built-in hour meter and low level oil indicator light for easy service tracking. > Integrated low level oil cut-out protection system.
Professional Interpump Italian triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication site glass.
Durable stainless steel pressure gauge with glycerine.
60 litre easy �ll universal fuel supply tank.
Two (2) lockable mounted aluminium tool / storage boxes.
PREMIUM MODEL
Page 127
Standard Speci�cations and Features
4000 or 5000 psi pump working pressure.
23 or 30 litres per minute water �ow rate.
Professional ‘Italian’ triplex ceramic piston plunger pump, complete with stainless steel valves and solid brass head with oil indication sight glass.
1450 / 1750 rpm pump running speed via directly coupled 2:1 reduction gearbox with oil indication sightglass.
Stainless steel supply and by-pass water tank for pump protection including quality Jobe �oat valve.
Extra pump support via rubber foot mounts.
Maintenance free battery with charge indicator and heavy duty looms.
Heavy duty carbon steel high pressure block body ball valve with a quality extra long anodised red handle.
High pressure back up safety relief valve.**
Brass ‘Y’ stainless steel water inlet strainer.
Quality German made hardened stainless steel high pressure nozzle with general wash down lance.
Complete operator and maintenance manuals.
Note State and territory laws and company speci�c regulations will vary. Therefore it’s the client’s responsibility to correspond with the appropriate authorities to ensure all requirements are met. Enquire for details and to discuss speci�c needs and applicable provisions.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Briggs & Stratton 3 year global commercial engine warranty.
Honda Green & Gold tested and approved 3 year GX engine warranty.
Scorpion Trailer
8
9
MODEL
Scorpion Trailer Mount 210
PRODUCT CODE
HP210-41STM
PUMP
InterpumpW2141 (66 Series)
WORKING PRESSURE PSI BAR
3045 210
FLOW RATE
41
PETROL ENGINEOPTIONS
Briggs &Stratton31HP
APPROX WEIGHT (UNIT ONLY)
700kg
MACHINE DIMENSIONS
4215mm (L) x 2150mm (W) x 1700mm (H)
Scorpion Trailer Mount 280-26
HP280-26STM InterpumpW2830 (66 Series)
4060 280 26 Honda GX690
700kg 4215mm (L) x 2150mm (W) x 1700mm (H)
MAX INLETTEMP
60°C
60°C
RPM
1450 via Interpump RS500 Gearbox
1450 via InterpumpRS500 Gearbox
n/a
n/a
1
2
3
4
PW134-RRCMPL Remote Mini Reel Package includes 60m of 1/4” Thermo Plastic Hose Complete with Snap Coupling, Ball Valve, Pressure Gauge and a Stainless Steel Frame.
Original USA made Spinning Warthog Nozzle.
15m of 3/16” Thermo Plastic Whip Hose.
Engine Hour Meter and Tachometer for Service Tracking (Briggs & Stratton model only).
Upgrade to Briggs & Stratton Engine.
Optional Extra Accessories
1
2
3
4
Trailer Speci�cations and Features
Purpose built hydro-jetting / drain cleaning trailer.
8” x 5” single axle galvanised �at deck with mudguards.
Tough duragal RHS chassis construction.
Seven (7) leaf spring slipper suspension.
Heavy duty 45mm square single axle with heavy duty bearings.
Load rated to 137kg.
Extra long draw bar for smoother towing and additional storage capability.
Two (2) adjustable drop-down rear stabiliser legs.
White ranger rims with 8ply tyres.
One (1) spare wheel.
Mechanical assisted disc brakes with manual hand brake.
One (1) battery solar trickle charger, one (1) LED orange beacon safety light and two (2) LED working lights.
Twelve (12) months registration.* (Note: this is at an additional cost and may be subject to change depending on the particular state / territory).
Optional Safety Equipment
One (1) mounted 4.5kg ABE powder type �re extinguisher for A Class - Solids, B Class - Liquids and E Class - Electrical �res.
Trained Personnel Only operation warning sign.
Two (2) warning safety cones.
Additional Safety Equipment pack:> PPE including: hard hats, hi-visibility vests, witches hats / hazard cones, safety sign, �rst aid kit, earmuffs and eye protection.
Scorpion Trailer Mount 280-30
HP280-30STM InterpumpW2830 (66 Series)
4060 280 30 700kg 4215mm (L) x 2150mm (W) x 1700mm (H)
60°C 1750 via InterpumpRS500 Gearbox
Briggs &Stratton31HP
Scorpion Trailer Mount 350
HP350-23STMB or HP350-23STMH
InterpumpW3523 (66 HP Series)
5075 350 23 Honda GX690
700kg 4215mm (L) x 2150mm (W) x 1700mm (H)
60°C 1450 via InterpumpRS500 Gearbox
Briggs &Stratton31HP
n/a
Page 128
At Jetwave we stock one of the largest ranges in Australia of leading brands of high pressure washing accessories and vacuum attachments, to complement your cleaning task.
Additionally, we stock a comprehensive range of quality genuine parts for maintenance, support, back-up and in-�eld convenience.
As an of�cial Australian distributor we stock and sell only the best quality high pressure washing and blasting accessories such as Interpump /General Pump, PA, Pulitecno, Mosmatic, Bolondi, Warthog, BE, R&M Suttner and Rapid Reel / Eley Corp.
Our vacuuming accessories supplier, IPC Soteco, specialises in manufacturing quality Italian made parts to accompany your Jetwave machine.
Jetwave has specialised in directly importing and distributing these quality brands to wholesale and retail clients throughout Australia, and the world, for over 20 years.
These cleaning, washing / wash-down, eradication and complementary accessories are suitable for a wide variety of applications, and will contribute to a more user friendly effective and ef�cient task.
Page 129
Accessories
Page 130
Jetwave’s range of USA designed, industrial strength robust hose reels, have been designed to suit any job you are undertaking.
Complementing Jetwave’s vast range of high pressure washers or drain cleaner / hydro-jetters, our range of hose reels will complete your industry leading package.
Models 1060 and 1065 have the bene�t of a hose reel plate that can be rotated to accommodate both �at bed and / or wall mounting arrangements. Wall mountings can accommodate either parallel or perpendicular con�gurations.
The hose reels can also be mounted on most Jetwave high pressure water cleaners, trailers, �at beds and
other cleaning rigs, providing a portable solution to stow away your hose safely and conveniently.
Model 1077 is a permanent wall mounted pivot hose reel that features a 360˚ pivoting action.
The hose reels are made from a robust and rust-proof alloy aluminium material and feature stainless steel hardware and solid brass components.
Complete packages are available including �ttings and your choice of selected hoses and accessories. Spare parts are also available.
Stand out speci�cations and quality features are provided in detail on the following page.
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er A
cces
sorie
s
Base and Wall Mount High Pressure Washer Hose ReelsJetwave’s heavy duty hose reels are designed for industrial applications to complete your high pressure washer package.
Model 1060 assembled into a perpendicular wall mount con�guration. 30m 3/8” DWB capacity.
Model 1065 assembled into a �at bed mount con�guration. 60m 3/8” DWB capacity.
Model 1077 is designed for permanent wall installation. 60m 3/8” DWB capacity.
Model 1077 is designed for permanent wall installation. 60m 3/8” DWB capacity.
Model 1060 on Hybrid High Pressure Water Cleaner
Page 131
Standard Speci�cations and Features
5000 psi maximum working pressure.
160°C maximum temperature.
Rust-proof alloy aluminium construction.
Brass and stainless steel no-leak-swivel.
Durable black powder coated �nish.
Corrosion resistant and precision machined axle.
1/2” nickel plated alloy steel axle hardware.
8-position stainless steel lock pin.
Full palm comfort grip crank handle.
Crush proof drum.
Innovative adjustable and reversible auto braking system.
Smooth spin long life axle bushings.
Universal “snug-�t” hose strap to accommodate different size hose.
Mounting plate with 6 mounting holes.
360º pivoting action.*
8-position, 360º pivot action, assembly and lock.*
Quick attach and detach feature.*
Flip over hose guide to keep your hands clean and injury free.*
Economically packaged in a �at pack for freight purposes.
Warranty
12 month warranty. CONDITIONS APPLY
1060
1060 CMPL
1065
1065 CMPL
1077
1077 CMPL
30m x 3/8” DWB or Thermoplastic
30m x 3/8” DWB or Thermoplastic
60m x 3/8” DWB or Thermoplastic
60m x 3/8” DWB or Thermoplastic
60m x 3/8” DWB or Thermoplastic
60m x 3/8” DWB or Thermoplastic
5000 340
5000 340
5000 340
5000 340
5000 340
160°C
160°C
160°C
160°C
160°C
160°C
7.7kg
18.7kg
8.6kg
30.6kg
16kg
38kg
Nil
Choice of Hose Length with Fittings, Leader Hose with Fittings and Nipples
Nil
Choice of Hose Length with Fittings, Leader Hose with Fittings and Nipples
Nil
Choice of Hose Length with Fittings, Leader Hose with Fittings and Nipples
460mm (L) x 450mm (W) x 190mm (H)
460mm (L) x 450mm (W) x 190mm (H)
460mm (L) x 450mm (W) x 190mm (H)
460mm (L) x 450mm (W) x 190mm (H)
460mm (L) x 450mm (W) x 190mm (H)
460mm (L) x 450mm (W) x 190mm (H)
Base and Wall Mount
Base and Wall Mount
Base and Wall Mount
Base and Wall Mount
Wall Mount
Wall Mount
Hose Reel Range
Additional High Pressure Hose; 3/8” Double Wire Braid Blue.
High Pressure Swivel Repair Kit.
1/2” Male x 3/8” Female High Pressure Swivel.
Crank Handle Single Hole.
Stainless Steel Locking Pin.
High Pressure Leader Hose with Fittings.
Replacement Parts and Accessories
MODEL / PRODUCT CODE MAX HOSE CAPACITY
WORKING PRESSUREPSI BAR
MAXTEMP
APPROXSHIPPING WEIGHT
BOXED DIMENSIONS
ACCESSORIES INCLUDED
CONFIGURATION
5000 340
* FEATURES ONLY AVAILABLE ON MODEL 1077.
Page 132
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er A
cces
sorie
s
Industrial Grade Heavy Duty Hose Reels Our range of industrial grade heavy duty hose reels will make any high pressure water cleaning job a breeze.
RETRACTABLE HOSE REEL
STAINLESS STEEL HOSE REEL
PREMIUM HOSE REEL
Premium /C10480300FB
Stainless Steel / 73960
Retractable / PW81000
100m x 3/8” DWB or Thermoplastic
50m x 3/8” DWB or Thermoplastic
30m x 3/8” DWB or Thermoplastic
4350 300
5000 340
1/2”
1/2”
1/2”
Steel
StainlessSteel
Steel
Hand Crank
Hand Crank
Retractable
MODEL / PRODUCT CODE
MAX HOSE CAPACITY
WORKING PRESSUREPSI BAR
INLET FITTING
27kg
19kg
37kg
APPROXSHIPPING WEIGHT
FINISH REWIND TYPE
5000 340 95°C
120°C
65°C
MAXTEMP
1/2”
1/2”
3/8”
OUTLET FITTING
Stainless Steel
StainlessSteel
Nickel PlatedSteel
SWIVEL MATERIAL
Standard Features and Speci�cations
Hand crank and retractable rewind types.
Steel and stainless steel �nishes.
Engineered for maximum strength and trouble free performance.
Suitable for a wide variety of heavy duty applications.
Stainless steel and nickel plated steel swivel material.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Page 133
Vertical Burner Systems / Hot Water Diesel Fired BoilerStandard Features and Speci�cations
INOX stainless steel housing, boiler head and bottom ring.
Seamless double steel coil for high thermal conductivity and increased fuel ef�ciency.
Bottom refractory cement, fan housing and fan.
Danfoss diesel fuel pump with solenoid valve.
Quality burner motor.
Danfoss ignition transformer.
Ignition wiring and starting electrodes.
Brass diesel spray nozzle and �lter.
3mm seamless mild steel coil rated to 400 bar with a burst pressure of 18,000 psi.
Optional stainless steel coil (selected models only).
Optional safer 12 volt system (selected models only).
V3
V1
V2
V4
5.84 5.7
6.55 6.62
8.35 8.2
1.50 - 60°H
1.75 - 60°H
2.25 - 60°H
240v
240v
240v
600mm
700mm
780mm
3120mm
3120mm
4250mm
400mm (L) x 400mm (W) x 820mm (H)
710mm (L) x 810mm (W) x 910mm (H)
MODEL FUEL CONSUMPTIONKG/H LT/H
FUEL NOZZLE SIZE
VOLTAGE HEIGHT BOXED DIMENSIONS
DIAMETER PRODUCT CODE
94009001 (Right)94009001/3 (Left)
94109026J-DX (Right)94109026J (Left)
94300000
400mm (L) x 400mm (W) x 820mm (H)
CIRCUMFERENCE
1040mm
1040mm
1310mm
5.17 5.11 240v 500mm 3120mm 400mm (L) x 400mm (W) x 820mm (H)
1.35 - 80°H6430000 1040mm
V1 12v 5.84 5.7 1.50 - 60°H 12v 600mm 400mm (L) x 400mm (W) x 820mm (H)
94109032 3120mm 1040mm
V1
V3
V4
V2
NEW AND IMPROVED
MAX PRESSUREPSI BAR
5800 400
5800 400
5800 400
5800 400
5800 400
15
21
30
MAX WATERFLOW10
15
Right Con�guration Left Con�guration
V2 12v 6.55 6.62 1.75 - 60°H 12v 700mm 3120mm94109023 400mm (L) x 400mm (W) x 820mm (H)
1040mm5800 400 21
V4 12v 8.35 8.2 2.25 - 60°H 12v 780mm 4250mm 710mm (L) x 810mm (W) x 910mm (H)
94300002 1310mm
51kg
52kg
33kg
96kg
WEIGHT
55kg
56kg
101kg 5800 400 30
52506
61257
78759
KCAL/H
47255
52506
61257
78759
Page 134
Aquamotor XB0031AAD BQ Speci�cations
Water pressure driven.
2200 psi / 150 bar maximum operating pressure.
30 litres per minute maximum water �ow rate.
Supplied by quality Italian manufacturer.
Made from INOX AISI316 stainless steel.
40mm minimum pass through barrel hole.
24 rpm slow rotation speed.
Volumetrical and self-spinning cleaning head.
Two or four rotating nozzles.
90˚C maximum temperature.
Approximate weight: 4.6kg.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er A
cces
sorie
s
Water Driven Wine Barrel WashersEf�ciently and effectively clean all internal surfaces of wine barrels saving time and water during vintage.
RECYCLE BARRELS &
SAVE MONEY
Aquamotor XB030A 450 Speci�cations
Water pressure driven.
3000 psi / 200 bar maximum operating pressure.
30 litres per minute maximum water �ow rate.
Supplied by quality Italian manufacturer.
Made from INOX AISI316 stainless steel.
40mm minimum pass through barrel hole.
450mm standard stainless steel shaft.
Stainless steel gears and NBR-EPDM seals.
Volumetrical and self-spinning cleaning head.
Four rotating nozzles.
90˚C maximum temperature.
Approximate weight: 7.5kg.
Product Codes: Aquamotor - XB030A 450Aquamotor - XB0031AAD BQ
Aquamotor XB030A 450Aquamotor XB0031AAD BQ
Page 135
Wash and Syphon M25E Speci�cations
24 volt electric motor driven (transformer included).
2300 psi / 160 bar maximum operating pressure.
25 litres per minute water �ow rate.
Supplied by quality Italian manufacturer.
Made from INOX AISI316 stainless steel.
Three minute barrel wash cycle.
Syphon dirty / used water.
Light weight design.
14 rpm rotating axis head.
90˚C maximum temperature.
Approximate weight 5.2kg.
Wash and Syphon M25E
Electric Driven Wine Barrel WashersReturn your barrels to new, saving time and money during vintage with our professional barrel washers.
Cleaning Head ROTY0018 Speci�cations
24 volt electric motor driven (transformer included).
2200 psi / 150 bar maximum operating pressure.
18 litres per minute water �ow rate.
Supplied by quality Italian manufacturer.
Made from INOX AISI316 stainless steel.
42mm minimum pass through barrel hole.
Lateral water inlet.
Slow spinning speed.
14 rpm rotating axis head.
Two rotating nozzles.
90˚C maximum temperature.
Approximate weight 3.1kg.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Product Codes: Wash & Syphon - 25435024Cleaning Head - ROTY0018
NEWWash and Syphon M25E
Cleaning Head ROTY0018
Page 136
Vulcan Stainless Steel Vertical Hot BoxReady to attach to your cold water high pressure water cleaner to access the effectiveness of hot water!Standard Features and Speci�cations
Supplied by quality Italian manufacturer.
AISI430 highly ef�cient (>90%) and environmentally friendly vertical diesel �red hot water burner system. > Vertical boiler with refractory cement base resulting in lower fuel consumption and running costs. > Superior 3mm seamless mild steel heating coil rated to 6000 psi / 400 bar. > Double steel coil resulting in high thermal conductivity. > Thermostatically adjustable temperature up to 130ºC* with quality Danfoss fuel pump, solenoid valve and transformer. > Ceramic electrodes with double insulated electrode caps. > Superior corrosion proof stainless steel outer and inner boiler housing.
Strong upheld unit design based around longevity, easier maintenance schedule and improved ef�ciency.
Stainless steel cladded removable top and side covers for easy serviceability.
Robust solid front wheels and manoeuvrable castor back wheels with brake for easy workability.
Heavy duty powder coated steel chassis frame.
Easy �ll powder coated steel 15L diesel tank for continual burner fuel supply.
Ergonomic tubular handle for user friendly transportation.
High pressure steel inlet and outlet.
Convenient rear control panel with burner operator switch and thermostat dial.
Built with only recognised high quality components supported by world-wide spare parts back-up.
SUITABLE FOR USE WITH
ANY HIGH PRESSURE WASHER
Electric Powered
Hot Water
Single Phase
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er A
cces
sorie
s
Page 137
Standard Speci�cations and Features
3600 or 5075 psi maximum working pressure rated unit.
Approximate 10-30 litres per minute water �ow rate range.
Flow switch(es) to allow burner ignition for added safety.
Visible illumination switch to indicate burner fan operation.
Quick coupling included.
Brass high pressure safety relief valve.
6m power supply lead.
Quality 10 amp plug (single phase).
2m wire braid high pressure connection hose.
Data plate for speci�cation detail and safety warning decal.
Removable back shroud for easy maintenance.
Complete with operator and maintenance manual.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Jetwave’s 24 month heating coil warranty. CONDITIONS APPLY
Vulcan Range Additional High Pressure Leader Hose; 3/8” Double Wire Braid Blue.
‘Whirl-Away’ 22” Rotary Floor Cleaner.
Steel Snap-on Fittings.
316 Grade 2.5mm Stainless Steel Heating Coil.
Optional Extra Accessories
Vulcan V1
Vulcan V1 12V
10199
10199-12 3600 250
10-21
10-21
V1
V1
650mm (L) x 650mm (W) x 760mm (H)
650mm (L) x 650mm (W) x 860mm (H)
MODEL PRODUCT CODE
WORKING PRESSURE PSI BAR
FLOW RATE RANGE L/PM (APPROX)
810mm (L) x 730mm (W) x 920mm (H)
810mm (L) x 730mm (W) x 1040mm (H)
BOXED DIMENSIONS
BURNER MODEL
DIMENSIONS
3600 250 70kg
70kg
APPROX WEIGHT (UNIT ONLY)
0.5KW / 50Hz / 230v / Single
0.5KW / 50Hz / 12v / Single
ELECTRIC MOTOR KW / Hz / VOLT / PHASE
5.84 5.7
5.84 5.7
FUEL CONSUMPTION KG/H LT/H
30 - 130°C*
30 - 130°C*
OUTLET HOT WATER TEMP
15L
15L
DIESEL TANK CAP
Vulcan V2
Vulcan V2 12V
10198
10198-12 5075 350
15-30
15-30
V2
V2
650mm (L) x 650mm (W) x 760mm (H)
650mm (L) x 650mm (W) x 860mm (H)
810mm (L) x 730mm (W) x 920mm (H)
810mm (L) x 730mm (W) x 1040mm (H)
5075 350 82kg
82kg
0.5KW / 50Hz / 230v / Single
0.5KW / 50Hz / 12v / Single
6.55 6.62
6.55 6.62
30 - 130°C*
30 - 130°C*
15L
15L
1
2 3
IN Low
pressure tap water
OUT High
pressure hot water
High pressure cold water
Note: High pressure water cleaner not included. For illustration purposes only.
1
2
3
Page 138
Standard Features and Speci�cations
Honda iGX390 available for electric start models.> Maintenance free battery and looms optional, but not standard.
Quality Italian Interpump or Annovi Reverberi (AR) pump.
Standard water inlet brass Y strainer, stainless steel thermal valve (gauge on selected models).
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er C
ombi
natio
ns
Petrol or Diesel / Pump / Engine Combos
11 10 8 9
MODEL
Pump / Motor 140
PRODUCT CODE
PM140-13P
PUMP
InterpumpTT1513(Series 51)
WORKING PRESSURE PSI BAR
2200 150
FLOW RATE L/PM
13
ENGINE OPTIONS
ELECTRIC START AVAILABLE
Pump / Motor965
PM965-15P InterpumpWW965(Series 44)
3600 250 15 Honda GX39013HP
MAX INLETTEMP
60°C
60°C
DRIVE
Direct Drive
Direct Drive
Pump / Motor270
PM270-15P InterpumpE2E2815(Evolution 2)
4000 275 15 60°C Direct Drive
Pump / Motor150
PM150-12P InterpumpW140(Series 44)
2200 150 12 Honda GX2006.5HP
60°C Gearbox
Honda GX2006.5HP
Honda GX39013HP
UNLOADERVALVE
Standard
Banjo
Integral
Integral
Pump / Motor201
PM201-15Por PM201-15PE
InterpumpWS201(Series 47)
3000 200 15 60°C Gearbox
Pump / Motor251
PM251-15Por PM251-15PE
InterpumpWS251(Series 47)
3600 250 15 60°C Gearbox
Pump / Motor275
PM275-15Por PM275-15PE
Annovi Reverberi(AR) RK15.28(Series 228)
4000 275 15 Honda GX39013HP
60°C Gearbox
Honda GX39013HP
Honda GX39013HP
Standard
Standard
Standard
RPM
3400
3400
3400
1450
1450
1450
1450
No
No
No
No
Pump / Motor201d
PM201-15D InterpumpWS201(Series 47)
3000 200 15 Yanmar L10060°C GearboxStandard 1450No
Yes
Yes
Yes
Mounted on tough long galvanised anti-vibration tray.
Hose, gun and lance optional, but not included as standard.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX engine warranty.
Page 139
Standard Features and Speci�cations
Choice of Honda or Vanguard Briggs & Stratton available.> Maintenance free battery and looms optional, but not standard.
Quality Italian Interpump or Annovi Reverberi (AR) pump.
Standard water inlet brass Y strainer, stainless steel thermal valve and gauge (safety valve on selected models).
Mounted on tough long galvanised anti-vibration tray.
Honda & Vanguard Pump / V-Twin Engine Combos
Vanguard Briggs & Stratton V-Twin Motor (PM275-30PB).
11 10 8 9
MODEL
Pump / V-Twin Motor 210
PRODUCT CODE
PM210-41PB
PUMP
InterpumpW2141(66 HP Series)
WORKING PRESSURE PSI BAR
3045 210
FLOW RATE L/PM
41
PETROL ENGINE OPTIONS
Pump / V-Twin Motor 275
PM275-30PBorPM275-30PH
InterpumpT2830(66 HP Series)
4000 275 30 Briggs & Stratton27HP
MAX INLETTEMP
60°C
60°C
DRIVE
Gearbox
Gearbox
Pump / V-Twin Motor 280-21
PM280-21PBor PM280-21PH
Annovi Reverberi(AR) XW21.28N(Series 194)
4060 280 21 60°C Gearbox
Pump / V-Twin Motor 280-26
PM280-26PBorPM280-26PH
Annovi Reverberi(AR) XW26.28N(Series 194)
4060 280 26 Briggs & Stratton27HP
60°C Gearbox
Briggs & Stratton31HP
Briggs & Stratton27HP
Pump / V-Twin Motor 350-21
PM350-21PBorPM350-21PH
Annovi Reverberi(AR) SXW21.35N(Series 194)
5100 350 21
Pump / V-Twin Motor 350-23
PM350-23PBor PM350-23PH
InterpumpW3523(66 HP Series)
5075 350 23 Briggs & Stratton27HP
60°C
60°C
Gearbox
Gearbox
Briggs & Stratton27HP
RPM
1450
1750
1450
1450
1450
1450
Rubber pump support mounts.
Hose, gun, lance and fuel tank (plastic or stainless steel) optional, but not included as standard.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Honda Green & Gold tested and approved 3 year GX engine warranty.
Briggs & Stratton 3 year global commercial engine warranty.
Honda GX690
Honda GX690
n/a
Honda GX690
Honda GX690
Honda GX690
Honda V-Twin Motor(PM350-23PH).
Page 140
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er A
cces
sorie
s
Professional Mosmatic Surface Cleaner (Whirlaway)
Standard Features and Speci�cations
12”, 20” or 30” cleaning diameter.
5000 psi / 350 bar maximum working pressure.
120ºC maximum rated temperature.
Rotor arms - 2x1/8” NPTF (20”) / 3x1/8” (30”) .
Inlet size - G3/8” F / G1/4” M.
INOX stainless steel adjustable housing and heavy duty castor wheels for optimal cleaning height.
Environmentally friendly water recycling function suctions residue and used water through the double-wall housing.
Versatile two-way rotary arm for easy manoeuvrability.
Relax-action ergonomic hand trigger for fatigue protection and ease of use.
Quality Swiss engineered swivel designed for high revolutions ensuring long lasting durability.
Splash protection via a heavy duty poly brush skirt.
Precision welded and balanced high pressure rotor arms withstand up to 500 bar.
Connects to high pressure water cleaner via the high pressure hose.
Approximate weight: 4.5kg (12”), 17.5kg (20”) and 23.5kg (30”).
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Clean dirt and grime from your �oors with our mosmatic surface vacuum recovery system.
SWISS QUALITY -
CLEAN TOUGH
SURFACES
Product Code: 12” Mosmatic Whirlaway / FL-AER30020” Mosmatic Whirlaway / MOS-520VR30” Mosmatic Whirlaway / MOS-750VR
30” MOSMATIC WHIRLAWAY 20” MOSMATIC WHIRLAWAY
RECOVERY SYSTEM
Page 141
ULTIMATE FLAT
SURFACE CLEANER
Standard Features and Speci�cations
Large 22” cleaning diameter.
4000 psi / 275 bar maximum working pressure.
15 litres per minute ideal �ow rate.
11 litres per minute minimum �ow rate.
30 litres per minute maximum �ow rate.
Rapid 20 metres per minute cleaning rate.
90ºC maximum rated temperature.
Uniquely designed rotary head and nozzle system.
Versatile two-way rotary arm for easy manoeuvrability.
Strong and lightweight grey poly cover designed to protect the operator from over spray.
Quality German made hardened stainless steel high pressure nozzles.
Heavy duty poly brush skirt.
Adjustable heavy duty caster wheels for optimal cleaning height.
Removable clip on and off caster wheels.
Connects to high pressure water cleaner via the high pressure hose.
Dimensions box: 840mm (L) x 590mm (W) x 300mm (H).
Approximate weight: 17kg.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Semi-professional Rotary Surface Cleaner (Whirlaway)Clean �oors fast and with ease by attaching Jetwave’s rotary surface cleaner to your high pressure washer!
Product Code: Whirlaway / BE-2200
Page 142
Prof
essi
onal
/ Hi
gh P
ress
ure
Wat
er C
lean
er A
cces
sorie
s
Professional Turbo Devil Surface Cleaner (Whirlaway)
Standard Features and Speci�cations
Large 20” cleaning diameter.
4000 psi / 275 bar maximum working pressure.
50 litres per minute maximum water �ow rate.
120°C maximum temperature.
Two (2) nozzles 1/4” M.
Nozzle inlet size 1/4”F.
Stainless steel adjustable housing and four (4) non-marking heavy duty castor wheels (60mm) for optimal cleaning height and effectiveness.
Foldable handle bar for space saving and easy transport.
Splash protection via a heavy duty poly brush skirt.
Stainless steel material construction.
Screw quick coupling system for easy hose attachment and disconnection.
Relax-action ergonomic hand trigger for fatigue protection and ease of use.
Quality German engineered swivel with triple bearing system designed for high revolutions ensuring long lasting durability.
Precision welded and balanced high pressure rotor arms that withstand up to 500 bar.
Connects to high pressure water cleaner via the high pressure hose.
Approximate weight: 10kg.
Warranty
Jetwave’s 12 month manufacturer warranty. CONDITIONS APPLY
Clear driveways, patios and car parks or any hard surface with our Turbo Devil Rotary Floor Cleaner.
GERMAN QUALITY -
CLEAN TOUGH
SURFACES
Product Code: 20” Turbo Devil / TURBODEVIL
Heavy duty brush skirt and non-marking castor wheels.
Page 143
SPARE PARTS AND ACCESSORIES CATALOGUE
Page 143
NEW
Page 144
Jetwave endeavours to empower our clients with purpose built cleaning solutions, incorporating years of expertise and innovative cleaning experience with our range of high end purpose built high pressure water cleaners, drain cleaners and hydro-jetters.
Through a process of consultation with our high pressure water solutions team we will identify your application requirements and tailor a product to suit.
Jetwave’s high pressure water cleaners incorporate the utmost degree of quality and dependability.
We pride ourselves on having standout features and bene�ts that are a cut above the rest, as all of Jetwave’s equipment is designed, researched and developed, and manufactured with the latest state-of-the art quality components for a long dependable life in the �eld.
Our customers often demand purpose built cleaning solutions or specialised units for operation in harsh and speci�c environments and we have the in-house capabilities to tailor an existing cleaning solution or engineer, develop and manufacture a purpose built cleaning solution from the ground up.
Page 145
Purpose B
uilt Solutions
Page 146
Purp
ose
Built
Sol
utio
ns /
Drai
n Cl
eane
rs /
Hydr
o-je
tters
Scorpion Twin
Engine Trailer
Scorpion Junior Trailer
WE WILL DESIGN A
DRAIN CLEANER TO SUIT YOUR
NEEDS
Page 147
Scorpion Ute
Talk to us today about your purpose built solution!
Scorpion Ute
Page 148
Purp
ose
Built
Sol
utio
ns /
High
Pre
ssur
e W
ater
Cle
aner
s
Explorer Hot Water Diesel Trailer Mount
Cadet Mine Hot Water Electric Skid
Mount
Hot Water Electric Twin Burner Skid
Mount
APPLICATION SPECIFIC
PRESSUREWASHERS
Page 149
2 x Diesel Engine Cold Water Four (4) Gun
Operation
Diesel Hot Water Dual Gun Operation -
Mine Ready
Diesel Scout Cold Water Trailer Mount -
Mine Ready
Talk to us today about your purpose built solution!
Page 150
Nozzle Chart - Page 126Conversion Table - Page 127
Terms, Conditions & Warranty - Page 128Notes - Page 130
Nozzle Chart - Page 148Conversion Table - Page 149
Terms, Conditions & Warranty - Page 150Notes - Page 152
Page 151
User Inform
ation
Nozzle Chart - Page 126Conversion Table - Page 127
Terms, Conditions & Warranty - Page 128Notes - Page 130
User Inform
ation
Nozzle Chart - Page 148Conversion Table - Page 149
Terms, Conditions & Warranty - Page 150Notes - Page 152
Page 152
Nozzle ChartSize Colour Flow Rate (LPM) at Pressure (PSI)
60
870
80
1160
100
1450
120
1740
140
2030
150
2175
160
2320
180
2610
200
2900
220
3190
240
3480
250
3625
280
4060
300
4350
320
4640
350
5075
380
5510
400
5800
420
6090
450
6525
480
6960
500
7250
bar
PSI
O2 Light Green
3.6 4.1 4.6 5.0 5.4 5.6 5.8 6.2 6.5 6.8 7.1 7.3 7.7 8.0 8.2 8.6 9.0 9.2 9.4 9.8 10.1 10.3 L/PM
O23 Light Yellow
3.9 4.5 5.0 5.5 5.9 6.1 6.3 6.7 7.1 7.4 7.7 7.9 8.4 8.7 8.9 9.4 9.7 10.0 10.2 10.6 11.0 11.2 L/PM
O25 Pink 4.3 5.0 5.6 6.1 6.6 6.9 7.1 7.5 7.9 8.3 8.7 8.9 9.4 9.7 10.0 10.5 10.9 11.2 11.5 11.9 12.3 12.5 L/PM
O27 Black 4.7 5.5 6.1 6.7 7.2 7.5 7.7 8.2 8.6 9.0 9.5 9.6 10.2 10.6 10.9 11.4 11.9 12.2 12.5 12.9 13.4 13.6 L/PM
O3 White 5.2 6.0 6.7 7.3 7.9 8.2 8.5 9.0 9.5 9.9 10.4 10.6 11.2 11.6 12.0 12.5 13.1 13.4 13.7 14.2 14.7 15.0 L/PM
O32 Dark Purple
5.5 6.4 7.1 7.8 8.4 8.7 9.0 9.5 10.0 10.5 11.0 11.2 11.9 12.3 12.7 13.3 13.8 14.2 14.6 15.1 15.6 15.9 L/PM
O35 Brown 6.0 7.0 7.8 8.5 9.2 9.6 9.9 10.5 11.0 11.6 12.1 12.3 13.1 13.5 14.0 14.6 15.2 15.6 16.0 16.5 17.1 17.4 L/PM
O37 Light Red
6.5 7.5 8.4 9.2 9.9 10.3 10.6 11.3 11.9 12.5 13.0 13.3 14.1 14.5 15.0 15.7 16.4 16.8 17.2 17.8 18.4 18.8 L/PM
O4 Dark Yellow
7.0 8.1 9.1 10.0 10.8 11.1 11.5 12.2 12.9 13.5 14.1 14.4 15.2 15.8 16.3 17.0 17.7 18.2 18.6 19.3 19.9 20.3 L/PM
O43 Dark Grey
7.5 8.7 9.7 10.6 11.5 11.9 12.3 13.0 13.7 14.4 15.0 15.3 16.2 16.8 17.4 18.1 18.9 19.4 19.9 20.6 21.3 21.7 L/PM
45 Blue 8.0 9.2 10.3 11.3 12.2 12.6 13.0 13.8 14.6 15.3 16.0 16.3 17.2 17.8 18.4 19.3 20.1 20.6 21.1 21.8 22.6 23.0 L/PM
O5 Light Purple
8.7 10.0 11.2 12.3 13.3 13.7 14.2 15.0 15.8 16.6 17.4 17.7 18.7 19.4 20.0 21.0 21.8 22.4 23.0 23.8 24.5 25.0 L/PM
O53 Beige 9.3 10.7 12.0 13.1 14.2 14.7 15.2 16.1 17.0 17.8 18.6 19.0 20.1 20.8 21.5 22.4 23.4 24.0 24.6 25.5 26.3 26.8 L/PM
O55 Dark Red
9.8 11.3 12.6 13.8 14.9 15.4 15.9 16.9 17.8 18.7 19.5 19.9 21.1 21.8 22.5 23.6 24.6 25.2 25.8 26.7 27.6 28.2 L/PM
O6 Dark Green
10.6 12.3 13.7 15.0 16.2 16.8 17.3 18.4 19.4 20.3 21.2 21.7 22.9 23.7 24.5 25.6 26.7 27.4 28.1 29.1 30.0 30.6 L/PM
O65 Light Blue
11.5 13.2 14.8 16.2 17.5 18.1 18.7 19.9 20.9 22.0 22.9 23.4 24.8 25.6 26.5 27.7 28.9 29.6 30.3 31.4 32.4 33.1 L/PM
O7 Orange 12.4 14.3 16.0 17.5 18.9 19.6 20.2 21.5 22.6 23.7 24.8 25.3 26.8 27.7 28.6 29.9 31.2 32.0 32.8 33.9 35.1 35.8 L/PM
O8 Argent 14.1 16.3 18.2 19.9 21.5 22.3 23.0 24.4 25.7 27.0 28.2 28.8 30.5 31.5 32.6 34.0 35.5 36.4 37.3 38.6 39.9 40.7 L/PM
O85 White Rose
15.0 17.4 19.4 21.3 23.0 23.8 24.5 26.0 27.4 28.8 30.1 30.7 32.5 33.6 34.7 36.3 37.8 38.8 39.8 41.2 42.5 43.4 L/PM
O9 Gold 16.3 18.8 21.0 23.0 24.8 25.7 26.6 28.2 29.7 31.1 32.5 33.2 35.1 36.4 37.6 39.3 40.9 42.0 43.0 44.5 46.0 47.0 L/PM
10 White Blue
17.8 20.6 23.0 25.2 27.2 28.2 29.1 30.9 32.5 34.1 35.6 36.4 38.5 39.8 41.1 43.0 44.8 46.0 47.1 48.8 50.4 51.4 L/PM
12 White Yellow
20.9 24.1 27.0 29.6 31.9 33.1 34.2 36.2 38.2 40.0 41.8 42.7 45.2 46.8 48.3 50.5 52.6 54.0 55.3 57.3 59.2 60.4 L/PM
13 White Green
23.2 26.8 30.0 32.9 35.5 36.7 37.9 40.2 42.4 44.5 46.5 47.4 50.2 52.0 53.7 56.1 58.5 60.0 61.5 63.6 65.7 67.1 L/PM
20 White Red
35.6 41.1 46.0 50.4 54.4 56.3 58.2 61.7 65.1 68.2 71.3 72.7 77.0 79.7 82.3 86.1 89.7 92.0 94.3 97.6 100.8 102.9 L/PM
Page 153
Conversion Table
From To Multiply ByMetres Feet 3.281Feet Metres 0.3048Millimetres Inches 0.0394Inches Millimetres 25.4Bar psi 14.5psi Bar 0.0689Kilograms Pound (Mass) 2.205Pound (Mass) Kilograms 0.4536Litres Per Minute GPM (US) 0.2624Litres Per Minute GPM (UK) 0.2200GPM (US) Litres Per Minute 3.785GPM (UK) Litres Per Minute 0.2200GPM (US) GPM (UK) 0.8327GPM (UK) GPM (US) 1.201Kilowatts Horsepower 1.341Horsepower Kilowatts 0.7457Conversion Formulas°C °F .555 x (°F - 32)°F °C (1.8 x °C) + 32Electric Brake Horsepower GPM x PSI / 1460Brake Horsepower Electric GPM x PSI / 1100GPM = Nozzle# x √ (PSI / 4000)psi = 4000 x (GPM / Nozzle#)²
Page 154
Terms, Conditions and Warranty
Seco Industrial Services Pty Ltd ABN trading as Jetwave Industrial Equipment warrants that, subject to the terms and conditions below, when its product is used for the purpose for which it is was designed, it will be free of material and manufacturing defects at the time of the original purchase. Any defects found of the product should be reported within the warranty period.
Our goods come with guarantee that cannot be excluded under the Australian Consumer Law. You are entitled to have the goods repaired or replaced if the goods, on our inspection, fail to be of acceptable quality and the failure does not amount to a major failure.
YOU MUST CAREFULLY READ THE INSTRUCTIONS SUPPLIED PRIOR TO USING ANY JETWAVE PRODUCT.
All product is to be installed and operated in accordance with the instructions provided. This warranty will not apply if it is used in a manner other than in accordance with the instructions.
1. WHAT DOES THE WARRANTY COVER
Jetwave warrants its products to be free of defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, then Jetwave will, at its sole discretion repair or replace the product with a like product. Replacement product or parts may include re-manufactured or refurbished parts or components.
2. HOW LONG THE WARRANTY IS EFFECTIVE
This Jetwave product is warranted for 12 months for all parts from the date of the �rst consumer purchase. Should any parts fail as a result of a defect in material or workmanship within the speci�ed period, the part will be replaced free of charge. This does not include travel charges, removal and re-installation charges.
3. HOW LONG THE WARRANTY IS EFFECTIVE LOCALLY
Please refer to the Warranty Schedule detailing the warranty period and coverage.
All Jetwave products warranty commences from the date of �rst consumer purchase.
Where this Jetwave product is sold for business purposes as de�ned in the relevant consumer protection law the warranty shall be for a period of six months from the date of purchase by the consumer.
4. WHO THE WARRANTY PROTECTS
This warranty is valid only for the consumer purchaser.
5. WHAT THE WARRANTY DOES NOT COVER
a. Damage, deterioration or malfunction resulting from:
1. Accident, misuse, negligence, �re, water, lightning, or other acts of nature, modi�cation or failure to follow instructions supplied with the product;
2. Repair or attempted repair by anyone not authorised by Jetwave;
3. Jetwave will not accept labour costs incurred by a service agent or customer without Jetwave’s written consent. Consent must be provided by Jetwave’s Service Manager and a purchase order number will need to be provided;
4. Any damage to the product due to shipment unless in transit insurance is requested (Jetwave takes no responsibility for transport damage on a consumer’s nominated account);
5. Removal or installation of the product;
6. Causes external to the product such as electric power �uctuations or failure;
7. Use of supplies or parts not meeting Jetwave speci�cations;
8. Normal wear and tear;
9. Product consumables i.e. mechanical seals, impellers, bearings, gaskets, electrical cables, nozzles, �lters, guns, lances;
10. Any unauthorised changes or tampering or partial disassembly of the product;
11. Water ingression or exposure to abnormal corrosive conditions, abrasive chemicals or ‘run dry’ conditions;
12. Any other cause which does not relate to a product defect.
b. Damage caused to the product arising from the use of another manufacturer’s product.
c. Water ingress, ingress of insects or vermin or foreign bodies causing an electrical malfunction. Care should be taken to avoid this occurrence.
d. Products supplied but not manufactured by Jetwave.
1. Petrol / diesel engine warranty claims for:
i. Yanmar (Power Equipment) (call 1800 069 469 for your nearest service agent)
ii. Briggs & Stratton (call 1300 274 447 for your nearest service agent)
iii. Honda MPE (call 1300 559 846 for your nearest service agent)
should be made directly to the engine manufacturer and warranty cover is subject to their terms and conditions;
2. Battery warranty claims should be made directly to SuperCharge Batteries. Call 1300 228 837 for your nearest agent.
e. Products that are not installed in accordance to the owner’s manual.
f. Damage to, or failure of, the product resulting from low or high voltage with the use of an incorrectly sized extension lead or a coiled electrical extension lead;
g. General service labour costs and maintenance, which includes oils and �lters.
6. LIMITATION OF LIABILITY
To the extent permitted by law, Jetwave liability for breach of a guarantee implied by any law in relation to goods Jetwave supplies that are not of a kind ordinarily acquired for person, domestic or household use or consumption, except for implied guarantees as to title to goods supplied, a purchaser’s right to undisturbed possession of goods supplied and undisclosed securities over goods supplied, is limited to the replacement of the goods, the payment of the cost of replacing the goods or the payment of the cost of acquiring equivalent goods.
7. EXCLUSION OF DAMAGES
To the extent permitted by law, Jetwave liability is limited to the cost of the repair or replacement of the product. Jetwave will not be liable for:
a. Damage to other property caused by any defects in the product, damages based upon inconvenient, loss of use of the product, loss of time, loss of pro�ts, loss of business opportunity, loss of goodwill, interference of business relationships, or other commercial loss, even if advised of the possibly of such damage.
b. Any other damage arising as a result of weather or natural disaster.
c. Any claim against the customer by any other party.
8. GOODS RETURNED POLICY
Return of goods for credit must be approved in writing, otherwise it will not be accepted. There is no obligation for Jetwave to accept goods returned for credit without prior approval. A return authority label must be attached to the outside of the box.
Page 155
Terms, Conditions and Warranty
a. If approved the goods must be returned in their original packaging, unused and no more than 30 days old.
b. Freight must be prepaid and on sent via a track and trace service as proof;
c. Jetwave will not accept any returns that are not by a track and trace service, such as Australia Post;
d. Obsolete products are not eligible for return;
e. Goods returned must be accompanied by a copy of the original purchase receipt and a written statement including the original invoice number, the date of purchase and detailed reason for return;
f. Inspection by warehouse must take place to ensure all parts and accessories are returned in full.
g. Custom special built, made to order goods, cannot be returned.
Credit value of the goods returned will be at the discretion of Jetwave. A 10% restocking, repackaging, documentation and administration will automatically be deducted from the credit value.
9. DELIVERY OF GOODS
Delivery of goods is when the customer or customer’s agent takes possession of the goods at Jetwave’s address or if the goods are delivered to a nominated address, even if the customer is not present at time of delivery.
If the customer is unable to take delivery of the goods for whatever reason; Jetwave is entitled to charge a reasonable fee for storage and re-delivery.
The cost of delivery is in addition to the cost of the goods.
The customer has 7 days to check all goods received, that they are in good working order, any damage resulting from transport and if any parts are missing.
10. PROOF OF PURCHASE
Jetwave reserves the right to reject any warranty if no proof of purchase is provided. A valid proof of purchase will be requested by the service agent prior to any works being carried out by the Jetwave service agent.
A valid proof of purchase includes the following:
a. Tax invoice from place of purchase.
b. Tax receipt from place of purchase.
11. SPARE PARTS
Spare parts are stocked for a reasonable period of time following last production. Jetwave does not warrant that spare parts will be made available for the whole of the reasonable period and reserves its right to cease supplying spare parts, or providing facilities for repair of spare parts in circumstances which are beyond its control including the requirement to remove spare parts from sales as a consequence of changes in the law or otherwise as it deems �t.
12. GENERAL MAINTENANCE
It is the responsibility of the consumer to ensure the product is free from general debris, any foreign matter and weather exposure.
It is the responsibility of the purchaser to ensure that the equipment is maintained and serviced according to the maintenance schedule.
For general service and maintenance please refer to your nearest dealer and/or Jetwave authorised service agent.
13. DEFINITIONS
13.1 Workshop warranty
As per the warranty schedule any Jetwave product that is determined to be a workshop only warranty means; if deemed faulty the product must be taken or freighted at the consumer’s cost to the Jetwave Head Of�ce on our instruction or nearest Jetwave service agent. The consumer is able to request an in�eld service/repair (if available in the consumer’s area); however this would be at the consumer’s own cost.
Any workshop issues deemed to be no fault/cause of the Jetwave product will result in all associated costs to the service provided be invoiced to the consumer and will not be covered under the Jetwave product warranty.
The workshop warranty covers faulty parts for a period of 3 months from the date of repair.
13.2 Replacement warranty
As per the warranty schedule any Jetwave product that is determined to be a replacement warranty means that the service agent will fully replace the faulty Jetwave product at no cost to the consumer if deemed warrantable.
The faulty product must be taken to the closest Jetwave service agent for replacement warranty otherwise all costs associated will be at the consumer’s cost and is not covered under the Jetwave product warranty.
14. EFFECTIVE LAW
This warranty gives you speci�c legal rights, and you may also have other rights which vary depending on where the product was purchased and the consumer protection law that applies in that state or territory. Nothing in this warranty limits or restricts, or is intended to detract from, any right or remedy which the purchaser or ultimate user of the product may have pursuant to Australian federal or state consumer protection legislation.
Jetwave Industrial Equipment warranty Terms and Conditions are governed by the laws of the state of South Australia and the parties hereby submit to the jurisdiction of the Courts of this state and the resolution of any dispute under this agreement.
The terms of this warranty policy may be inconsistent with the warranty statement in the products owner’s manual. To the extent of any inconsistency the terms of this warranty state prevail.
Page 156
Notes
Page 157
Notes
Page 158
To design, develop and deliver the best industrial cleaning equipment for our customers.
HEAD OFFICE72-74 Richmond Road
Keswick, AdelaideSouth Australia Australia 5035
T +61 (8) 8371 3599F +61 (8) 8371 4497
E [email protected] www.jetwave.com.au
Authorised Distributor Details