PRODUCT DATASHEET Flare series - Future Electronics

PRODUCT DATASHEETFlare serieslast update 16/11/2012

Ordering number

FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus

C12763_FLARE-MINI-A

FlareLensXB-DClear16 mm8.6 mmRound PMMA - Glue Ready

FWHMEfficiencycd/lmGerber File

16+95 degrees 95 % 1.300 Available

Ordering number


C12837_FLARE-MINI-A-PIN

FlareLensXB-DClear16 mm8.6 mmRound PMMA - Pin, glue Ready



Ordering number


CA12764_FLARE-MINI-A

FlareAssemblyXB-DClear16 mm9.1 mmRound PMMA - Tape Ready



May 17th 2013 17:47 Copyright Ledil Oy - Subject to change without prior notice - Page 1/4

Ledil Oy Salorankatu 10 24240 SALOFinland

http://www.ledil.com email: [email protected] FAX: +358-2-733 8001


Ordering number


CA12838_FLARE-MINI-A-PIN

FlareAssemblyXB-DClear16 mm9.1 mmRound PMMA - Pin, tape Ready



Ordering number


C13015_FLARE-MINI-AD

FlareLensXB-DClear16 mm8.6 mmRound PMMA - Glue Ready



Ordering number


C13016_FLARE-MINI-AD-PIN

FlareLensXB-DClear16 mm8.6 mmRound PMMA - Pin, glue Ready



Ordering number


CA13057_FLARE-MINI-AD

FlareAssemblyXB-DClear16 mm9.1 mmRound PMMA - Tape Ready







Ordering number


CA13058_FLARE-MINI-AD-PIN

FlareAssemblyXB-DClear16 mm9.1 mmRound PMMA - Pin, tape Ready



Ordering numberDescription


CA109321

FlareAssemblyXB-DClear29 x 22.8 mm12.84 mmRectang PMMA - - Ready


10+108 degrees 93 %1.520 Available

NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.





GENERAL INFORMATION

- Product series especially designed & optimized for XB-D series of LEDs. - Special care taken to make light distribution as uniform as possible.- Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current andtemperature conditions.

Please find more information about used material from below:http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdfhttp://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf




0%

25%

50%

75%

100%

-90-80-70-60-50-40-30-20-100102030405060708090

Relative intensity of CA13057&CA13058_FLARE-MINI-AD-XBD

0%

25%

50%

75%

100%

-90-80-70-60-50-40-30-20-100102030405060708090


0%

25%

50%

75%

100%

-90-80-70-60-50-40-30-20-100102030405060708090


0%

25%

50%

75%

100%

-90-80-70-60-50-40-30-20-100102030405060708090
