Product Guide - Lynx Pro Audio

A culture of sound

Product Guide

http://www.lynxproaudio.com/www/home/

http://www.lynxproaudio.com/www/home/

www.lynxproaudio.com4

TechnologyAt Lynx Pro Audio, all the technology we employ is our very own. We design and program our own DSP systems and control software.

This allows us to work with the latest technology available for DSPs, AD and DA converters, microprocessors etc. Being able to master such technology allows us to add new features to our products guaranteeing that the users of Lynx Pro Audio systems will always have the latest available upgrades.

DIGITAL PROCESSING

Latest generation 24bit/96Khz digital processor which optimizes the system components.

It includes 2 channel processing electronics with functions for phase correction, driver protection, gain control , equalization, classic crossover and linear phase filtering.

IMPORT DATA

This feature of our control software allows us to add the electro-acoustic response of the system we want to adjust to our processing chain, enabling us to see the total system response and not just the electrical one.

AES/EBU

For self-powered Lynx Pro Audio cabinets that have this option, enabling digital audio input signal via AES / EBU protocol, accepting signals up to 24 bits and 192 kHz whilst with the software being able to choose if you want to use the input L , R or L + R.

DIGITAL INCLINOMETER

Automatic function to calculate cabinet splay angles. The inclinometer data can be viewed and controlled from the cabinet LCD display either manually or automatically.

The inclinometer automatically communicates with the DSP and modifies the equalization algorithms. According to the splay angle of the inclinometer the DSP compensates for atmospheric loss.

The result is a more efficient performance and a flat response, even at long distances.

AMPLIFICATION

The Class D amplifier is characterized by high efficiency (low loss of energy), which results in smaller heat sinks and much smaller total power consumed by reducing the weight and size of the amplifier.

Class D amplifiers achieve about 80% higher efficiency than other amplifiers, whose efficiency is approximately 45%. There are significant advantages, the lower dissipation produces less heat and saves circuit board space .

FLOAT POINT OPERATIONS IN DOUBLE PRECISION

The DSP processing works with double precision in floating point, achieving an internal resolution of 56 bits, one of the largest resolutions available on the market today.

This enables the use of high precision filters with extremely low distortion delivering unbeatable sound clarity and quality

http://www.lynxproaudio.com/www/home/about-us/

www.lynxproaudio.com 5

ONLINE CONTROL SYSTEM

OCS is a software to control each cabinet in real time (via Ethernet or pc).

It obtains detailed information of the cabinet behaviour: RMS levels, Input clip, compression levels, power module temperature, air absorption compensation and cabinet angulation.

OCS allows to control each cabinet: You can change the preset, gain, mute and polarity, activate the SOLO mode and the weather compensation.

ETHERNET

This option enables you to connect various devices in a standard Ethernet network and control them remotely through our OCS ‘Online Control Software’.

CABINET UPDATER

This software enables you to update your cabinets with the latest presets and firmware. Enclosures are connected via Internet to our servers and automatically detects any updates that might have been made for them.

This ensures the end user always has all the improvements developed by our R & D department available for their system.

NEODYMIUM

Lynx Pro Audio cabinets that use neodymium magnet group components benefit from special characteristics such as improved driver performance and of course the saving in overall system weight.

RAINBOW

Based on polar response measurements, taken meticulously with a 360º vertically and horizontally.

Both coverage, the Rainbow software is reliable to calculate the SPL response including the interaction between them taking into account the magnitude and phase response, in order to enable the user to correct cancellations and even to create them if the acoustical design so requires.

This software is able to import WMF files

ATMOSPHERIC

Air absorption compensation is an algorithm that compensates for the loss of pressure caused by weather conditions and the distance to the listener’s ear from the sound system

By introducing three parameters (temperature, relative humidity and distance) the algorithm calculates the losses and compensates for this loss so they are not apparent in the listening zone.

POWER FACTOR CORRECTION

PFC is a measure of how efficiently the load current is being converted into a more useful output current.With PFC the power supply regulates itself when AC mains change, so the amp power output will not change with mains swinging.

This system is also very environmentally friendly with a reduction of approximately 40% of current draw. It transforms the power consumed in to “useful power” producing less hum and distortion.


ADP SERIES

The ADP range of cabinets is designed for both portable and permanent installations. They offer one of the most technologically advanced sound products available on the market, with a tour-friendly range of powered cabinets designed for quick and easy set-ups and with no need for heavy external amplification racks. The ADP Series offer high levels of SPL and sound clarity whilst maintaining a compact and portable design, with an unbeatable power to size ratio.

All the transducers are custom made with neodymium magnets, being much lighter than a conventional speaker. The ADP units use Class D amplification with switching power supply. The integrated amplification far exceeds the transducers’ needs thus resulting in high output, high damping factor and extremely low levels of distortion. Furthermore a Digital Signal Processor is integrated in to each cabinet, providing maximum system efficiency and total protection.

Every box comes with 20 presets which include full-range, various crossovers and a flat preset so that the user can adjust the parameters manually. Ethernet capabilities are also available allowing the user to monitor and control de cabinet online. The ADP cabinets offer the utmost sound reinforcement reliability, incorporating the latest acoustical and electronical technology and delivering incredible, dynamic sound.

http://www.lynxproaudio.com/www/home/productos/adp-series/


Specs

Accessories

ADP SERIES ADP-215High Output, self powered (Class D switch mode power supply), two-way cabinet.

Consists of two 15″ neodymium magnet transducers with nomex cones & suspension and a 1.4″ exit compression driver with titanium diaphragm, mounted on a 60ºH x 50ºV constant directivity horn.

DSP (FIR technology) controlled with 2000W amplification, 143dB SPL.

Components LF/MF 2 x 15″ neodymium + 1.4″ HF titanium diaphragm 3″ voice coil compression driver Cabinet adjustment back panel LCD

Frequency range 40 Hz – 20 KHz (-10 dB) Internal Controls Temperature sensor, Online Control system, Fan Speed

Frequency Response 45 Hz – 18 KHz (± 3 dB) Control Connections Ethernet (OCS) optional, USB (DSP programming)

Max. SPL 140 dB / 143dB peak AC Power 230V / 115V selectable. 50/60 Hz 5A

Coverage angle 60ºH x 50ºV constant directivity horn AC Connections 16A Neutrik powerCON with link output

Power Amplifier 2000 W Class D Material 15mm Premium birch plywood

LF/MF amplifier 2 x 750 W Finish High resistant water-based black paint

HF amplifier 1 x 500 W Dimensions 1147 x 489 x 415 mm (H x W x D)

Processing 56 bit Lynx DSPB-22 with FIR filters Weight 52 kg (114 lbs)

SP-LXADPConnection plate

SC-FC2Heavyweight install stud

FD-ADP215Nylon protection

FD-ADP215NLRain cover

http://www.lynxproaudio.com/www/home/productos/adp-series/adp-215/



Specs

Accessories

ADP SERIESADP-15High Output, self powered (Class D switch mode power supply), two-way cabinet.

Consists of a 15″ neodymium magnet transducer with nomex cones and a 1.4″ compression driver with a 2.5″ voice coil titanium diaphragm mounted on a 80ºH x 50ºV constant directivity, rotatable horn.

DSP (FIR technology) controlled with 1500W amplification, 136dB SPL

Components LF/MF 1 x 15″ neodymium + HF driver 1.4″ titanium diaphragm 2.5″ voice coil Cabinet adjustment back panel LCD

Frequency range 60 Hz – 20 KHz (-10 dB) Internal Controls Temperature sensor, Online Control system, Fan speed

Frequency Response 70 Hz – 18 KHz (± 3 dB) Control ConnectionsEthernet (OCS) optional, USB (DSP programming)

Max. SPL 133 dB / 136 peak AC Power 230V / 115V selectable. 50/60 Hz 5A

Coverage angle 80º H x 50º V rotatable horn AC Connections 16A Neutrik powerCON with link output




Processing 56 bit Lynx DSPB-22 with FIR filters Weight 39 Kg (86 lbs)

SC-FC1Lightweight install stud

TU-C01Connecting pole

TU-C02Pole support

VSM-V1Top hat

WB-03Wall bracket


SB-02Stand

CS-1215Cluster




Specs

Accessories

ADP SERIES ADP-12High Output, self-powered (Class D switch mode power supply), two-way cabinet.

Consists of a 12″ (3″ voice coil) neodymium magnet transducer with nomex cones and a 1.4″ compression driver with a 2.5″ voice coil titanium diaphragm mounted on a 80ºH x 50ºV constant directivity rotatable horn.


ComponentsLF/MF 1 x 12″ neodymium (3″ Interleaved Sandwich voice coil) + HF 1.4″ titanium diaphragm 2.5 voice coil

Cabinet adjustment back panel LCD


Frequency Response 65 Hz – 18 KHz (± 3 dB) Control ConnectionsEthernet (OCS) optionalUSB (DSP programming)


Coverage angle 80º H x 50º V Rotatable horn AC Connections 16A Neutrik powerCON with link output





CS-1215Cluster support

SC-FC1Lightweight install stud


TU-C02Pole support

VSM-V1Top hat

WB-03Wall bracket


SB-02Stand




Specs

Accessories

ADP SERIESADP-26High Output, self-powered (Class D switch mode power supply), two-way cabinet.

Consists of two 6″ (1.5″ voice coil) neodymium magnet transducers with aluminium demodulating rings and a 1″ compression driver with titanium diaphragm, mounted on a 90ºH x 60ºV rotatable, exponential horn.


ComponentsLF/MF 2 x 6″ neodymium (aluminium demodulating rings) + HF 1″ titanium diaphragm compression driver

Cabinet adjustment back panel LCD

Frequency range 65 Hz – 20 KHz (-10 dB) Internal Controls Temperature sensor, Online Control system

Frequency Response 75 Hz – 18 KHz (± 3 dB) Control Connections Ethernet (OCS) optional, USB (DSP program.)

Max. SPL 124 dB / 127 peak AC Power 230V / 115V selectable. 50/60 Hz 5A

Coverage angle 90º H x 60º V rotatable horn AC Connections 16A Neutrik powerCON with link output




Processing 56 bit Lynx DSPB-22 with FIR filters Weight 13kg (28 lbs)

AGR-6Eye bolt

TU-C01connecting pole

TU-C02pole support

VSM-V1Top hat

WB-03Wall bracket

SB-02Stand




Specs

Accessories

ADP SERIES ADP-212MHigh output, self powered (class D switch mode power supply) with PFC (Power Factor Correction), two-way stage monitor.

Consists of two 12″ transducers with aluminium voice coil and a compression driver with 1.4″ titanium diaphragm with 55º conic dispersion.


Components LF/MF 2×12″ + 1.4″ titanium diaphragm HF driver Cabinet adjustment side panel LCD

Frequency range 55 Hz – 20 KHz (-10 dB) Internal Controls Temperature sensor, Fan speed / Online Control OCS system


Max. SPL 136 dB / 139 dB peak AC Power 85V – 270V. 50/60 Hz with PFC 3A

Coverage angle 55º H x 55º V AC Connections 16A Neutrik powerCON with link output





FC-212MX2Flight case

http://www.lynxproaudio.com/www/home/productos/adp-series/adp-212m/



Specs

Accessories

ADP SERIESADP-15MHigh output, self powered (Class D switch mode power supply), two-way stage monitor.

Consists of a 15″ coaxial neodymium magnet transducer with nomex cone and suspension.Compression driver with a 1.4″ titanium diaphragm with 90º conic dispersion.


Components LF/MF 1×15″ neodymium + 1.4″ titanium diaphragm HF driver Cabinet adjustment side panel LCD









FC-15MX2Flight case




Specs

Accessories

ADP SERIES ADP-12MHigh output, self powered (Class D switch mode power supply), two-way stage monitor.

Consists of a 12″ (3″ voice coil) coaxial transducer with demodulating rings and a 3″ VC compression driver with a titanium diaphragm and a 40ºH x 60ºV dispersion horn.


Components LF/MF 1 x 12″ coaxial neodymium + 3″ VC HF compression driver Cabinet adjustment Side panel LCD



Max. SPL 129 dB / 132 dB peak AC Power 230V / 115V selectable. 50/60 Hz 5A






FC-12MX2Flight case




Specs

Accessories

ADP SERIESADP-18SHigh output, self powered (Class D switch mode power supply) direct radiation sub bass cabinet.

Consists of an 18″ (4″ DUO voice coil) neodymium magnet transducer with DCS (Double Conex Spider) technology.

DSP controlled with 1400W amplification with PFC, 136dB SPL

Components 1 x 18″ Neodymium Woofer with Nomex cone Internal Controls Temperature sensor, Online Control system

Frequency range 30 Hz – 250 Hz (-10 dB)Control Connections

Ethernet (OCS) optional, USB (DSP programming)

Frequency Response 35 Hz – 150 Hz (± 3 dB)

Max. SPL 133 dB/ 136 dB peak AC Power 90 – 264V. 50/60 Hz with PFC

Coverage angle Omnidirectional AC Connections 16A Neutrik powerCON with link output

Power Amplifier 1000 W Class D switching power supply & PFC Material 18mm Premium birch plywood

Configuration Bass-reflex, Direct radiation Finish High resistant water-based black paint

Processing 56 bit Lynx DSPB-22 Dimensions 707 x 525 x 717 mm (H x W x D)

Cabinet adjustment back panel LCD Weight 51 kg (112 lbs)


TU-C02Pole support

VSM-V1Top hat

VSM-V2Connector plate

FD-ADP18SNLRain cover

http://www.lynxproaudio.com/www/home/productos/adp-series/adp-18s/



Specs

Accessories

ADP SERIES ADP-12SHigh output, self powered (Class D switch mode power supply) direct radiation sub bass cabinet.

Consists of an 12″ (4″ ISV voice coil) neodymium magnet transducer with double spider for improved linearity.

DSP controlled with 1400W amplification with PFC, 134dB SPL.

Components 1 x 12″ Neodymium Woofer with Nomex cone Internal Controls Temperature sensor, Online Control system

Frequency range 40 Hz – 180 Hz (-10 dB)Control Connections

Ethernet (OCS) optional, USB (DSP programming)

Frequency Response 45 Hz – 150 Hz (± 3 dB)

Max. SPL 131 dB/ 134 dB peak AC Power 90 – 264V. 50/60 Hz with PFC

Coverage angle Omnidirectional AC Connections 16A Neutrik powerCON with link output

Power Amplifier 1000 W Class D with switching power supply Material 15mm Premium birch plywood

Configuration Bass-reflex, Direct radiation Finish High resistant water-based black paint

Processing 56 bit Lynx DSPB-22 Dimensions 495 x 380 x 644 mm (H x W x D)

Cabinet adjustment back panel LCD Weight 29 kg (64 lbs)


TU-C02Pole support

VSM-V1Top hat

VSM-V2Connector plate

FD-ADP12SNLRain cover




The technical specifications described in this catalogue can vary without previous notification.

If you want to recieve the printed version of this catalogue just click here:

[email protected]

You can find us in all these social media:

mailto:info%40lynxproaudio.com

https://www.facebook.com/lynxproaudio/timeline

https://plus.google.com/u/0/110950061144730918006/posts

https://www.linkedin.com/company/lynx-pro-audio

https://twitter.com/Lynx_Pro_Audio

https://www.youtube.com/channel/UCh3DNJ0HkAt0nnS7Ja1zL6w

Documents

Product Guide - Lynx Pro Audio