PI-PF-509306 0512 (PEX Press with Loose Sleeve) Viega... The global leader in plumbing, heating and pipe joining systems 301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 316-425-7618 • www.viega.com ©2011, ProPress ® , FostaPEX ® , Seapress ® , MegaPress ® , MegaPressG ® and Viega ® are registered trademarks of Viega GmbH & Co. PureFlow ® , Smart Connect ® , Climate Panel ® , Climate Mat ® , Climate Trak ® , MANABLOC ® , Radiant Wizard ® , S-no-Ice ® , Snap Panel ® , XL ® and XL-C ® are registered trademarks of Viega LLC. MiniBloc ™ , ProRadiant ™ , PolyAlloy ™ , SmartLoop ™ and Zero Lead ™ are trademarks of Viega LLC; GeoFusion ™ , ProPressG ™ and ViegaPEX ™ are trademarks of Viega GmbH & Co. KG. Product I nstructio ns 1. Square off tubing to proper length. Uneven, jagged or irregular cuts will produce unsatisfactory connections. 2. If using FostaPEX tubing, insert into prep tool, push and turn until no more resistance is felt. If using ViegaPEX, continue to step 3. 3. Slide press sleeve fully over end of tubing. 4. Insert press ﬁtting into tubing and engage fully. 5. Check full tubing insertion at view hole of sleeve. 6. Position press tool perpendicular over press sleeve and close tool jaws to engage ratchet. 7. Close handles, utilizing trigger to reduce grip span if desired. 8. Extend handle and continue ratcheting until automatic tool release occurs at proper compression force. 9. Warning: The connection is not leakproof when the tool has been opened by emergency release. 1/2” PureFlow 1/ 2” 1/ 2” 1/ 2” 1 2 3 4 5 6 7 8 9 Turn screw for emergency release. Viega PEX Press with Loose Sleeve

Product Instructions · Viega... The global leader in plumbing, heating and pipe joining systems ... 800-976-9819 • Fax: 316-425-7618 • ©2011, ProPress

Download PDF Report

Upload
trinhbao
View
213
Download
0

Embed Size (px)

Citation preview

Page 1: Product Instructions · Viega... The global leader in plumbing, heating and pipe joining systems ... 800-976-9819 • Fax: 316-425-7618 • ©2011, ProPress

PI-PF-509306 0512 (PEX Press with Loose Sleeve)

Viega... The global leader in plumbing, heating and pipe joining systems301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 316-425-7618 • www.viega.com

©2011, ProPress®, FostaPEX®, Seapress®, MegaPress®, MegaPressG® and Viega® are registered trademarks of Viega GmbH & Co. PureFlow®, Smart Connect®, Climate Panel®, Climate Mat®, Climate Trak®, MANABLOC®, Radiant Wizard®, S-no-Ice®, Snap Panel®, XL® and XL-C® are registered trademarks of Viega LLC. MiniBloc™, ProRadiant™, PolyAlloy™, SmartLoop™ and Zero Lead™ are trademarks of Viega LLC; GeoFusion™, ProPressG™ and ViegaPEX™ are trademarks of Viega GmbH & Co. KG.

ProductInstructions

1. Square off tubing to proper length. Uneven, jagged or irregular cuts will produce unsatisfactory connections.2. If using FostaPEX tubing, insert into prep tool, push and turn until no more resistance is felt. If using ViegaPEX,

continue to step 3.3. Slide press sleeve fully over end of tubing.4. Insert press fitting into tubing and engage fully.5. Check full tubing insertion at view hole of sleeve.6. Position press tool perpendicular over press sleeve and close tool jaws to engage ratchet.7. Close handles, utilizing trigger to reduce grip span if desired.8. Extend handle and continue ratcheting until automatic tool release occurs at proper compression force.9. Warning: The connection is not leakproof when the tool has been opened by emergency release.

PureFlow1/2”

PureFlow

1/2”

PureFlow

1/2”

PureFlow1/2”

1 2 3 4 5

6 7 8 9

Turn screw for emergency release.

Viega PEX Press with Loose Sleeve