program guide

Overview of ICSMA16

Sun, 19th Aug 13:00 -17:00 1/2 day city tour 16:00 - 20:00 Registration 18:00 - 20:00 Welcoming reception

Mon, 20th Aug

8:00 - 9:00 Registration 9:00 - 15:30 Technical sessions 15:30 - 17:30 Poster Session 1 18:30 - 20:00 Traditional dance program by Nrityagram

Tue, 21st Aug 9:00 - 16:15 Technical sessions 16:15 - 18:15 Poster Session 2

Wed, 22nd Aug 6:30 – 21:00 Tour to cultural centre of Mysore

Thurs, 23rd Aug 9:00 - 18:00 Technical sessions 19:00 - 22:00 Conference dinner

Fri, 24th Aug 9:00 to 13:00 Technical sessions and closing session

• All technical sessions, the cultural programme and lunches will take place at the National Science Seminar Complex (NSSC) within IISc.

• The welcoming reception and the conference dinner will be at the Le Meridien Hotel. • In the detailed program in the next few pages, plenary and invited talks are indicated in bold. • Sessions 1A, 2A, etc. will take place in HALL A, Sessions B in HALL B, etc. • Plenary Sessions and Sessions D will take place at the J.N. Tata Auditorium. See map at the end of the program

booklet for details • Registration and help desk will be open from 8:00 AM to 5:00 PM each day

Monday, 20th August

9:00 Inauguration

Plenary Session chaired by Gunther Eggeler

9:15 NOBUHIRO TSUJI Unique yielding behaviors of ultrafine grained materials

9:45 VIKRAM JAYARAM Microscale testing of bond coats on superalloys

10:15 Coffee

Session 1A: Atomistic & Microstructural Aspects of Plastic Deformation A. Wilkinson

Session 1B: High Temperature Deformation B. Viguier

Session 1C: Large and Severe Plastic Deformation S. Sarma

Session 1D: Mechanical Behaviour at Micro and Nano Length Scales U. Klement

10:45 GEORGES SAADA Plastic flow heterogeneity, elastic-plastic transition, and yielding instabilities

HIDEHIRO YOSHIDA Grain boundary nanostructure control for the improvement of high temperature ductility in oxide ceramics

RAJEEV KAPOOR Hardening and softening in ultrafine grained materials

K.N. JONNALAGADDA Mechanics at the microscale through in situ experiments

11:15 WOLFGANG PANTLEON Disorientation evolution and work-hardening stages

M. BENSCH Creep modeling of oxidation affected thin-wall structures of alumina forming single crystal Ni-based superalloys

STEFAN WURSTER Improved fracture behavior of severe plastically deformed tungsten based materials

A.D. ROLLETT Strength and microstructure in Cu-Nb nano-laminates

11:35 Coffee

11:55 LÁSZLÓ S. TÓTH Effect of grain refinement on

F. PETTINARI-STURMEL How the mobile dislocation

J. VRÁTNÁ Mechanical properties and

C. MARICHAL Various intrinsic & extrinsic

Monday, 20th August

large strain hardening evolution controls the high temperature anisothermal creep behavior of MC2 Ni-based superalloy

microstructure of magnesium alloys processed by severe plastic deformation

factors influencing plastic flow of BCC single crystal pillars investigated with in-situ Laue micro-diffraction compression testing

12:15 MARTIN F.-X. WAGNER Biaxial compression testing of metals and alloys – investigating tension-compression asymmetry in the third quadrant

M. D. MATHEW Understanding creep deformation behavior of 316LN stainless steel from impression creep tests

ENRICO BRUDER Impact of severe pre-straining via different routes on the age hardening behavior of Al-Mg-Si alloys

MASANORI NAKATANI Mechanical property of nano-laminated TiN films with island-like morphology by ion beam assisted deposition

12:35 R.SCHOUWENAARS A probabilistic analysis of strain hardening: Incorporation of the obstacle strength distribution

GIRISH SASTRY

A.M. KLIAUGA A comparison of microstructure evolution & mechanical behavior of F138 austenitic stainless steel after severe plastic deformation at room temperature and at 300oC

SHUN KONDO Dynamic observation of dislocation motion in SrTiO3 by in situ TEM nanoindentation

13:00 Lunch

Session 2A: Atomistic & Microstructural Aspects of Plastic Deformation M. Wagner

Session 2B: High Temperature Deformation M. D. Mathew

Session 2C: Large and Severe Plastic Deformation R. S. Kottada

Session 2D: Mechanical Behaviour at Micro and Nano Length Scales N. Ravishankar

14:00 BENT F. SØRENSEN Fracture & crack bridging in polymer matrix composites: Microscale experiments and micromechanical models

SHIBAYAN ROY (14:10) Deformation behavior of boron modified Ti-6Al-4V-0.1B alloy in the superplastic regime

C. KAMMERHOFER (14:10) Fracture toughness of nanostructured steels produced by HPT

F. PETTINARI-STURMEL (14:10) A TEM in-situ analysis of the microstructure & the deformation micro-mechanisms in beta-

Monday, 20th August

metastable Ti alloys

14:30 ANGUS J WILKINSON Slip Transfer at Grain Boundaries – Assessing the Mechanical Driving Force

G. ANGELLA A rate equation describing both tensile & creep behavior of an austenitic stainless steel at high temperature

J. SCHARNWEBER Al/Ti laminates produced by ARB

MICHAEL MARX Mechanical properties of bimodal nickel on the basis of heat treated ECAP and PED nickel

14:50 M.J. SZCZERBA Kink bands in compressed Ni-Mn-Ga single crystals

CHRISTIAN HOCHMUTH The influence of the zirconia content on microstructure and creep properties of Mo-Si-B alloys

DAVID GEIST High pressure torsion of intermetallic NiAl

M. LE FOURNIER Measuring and modeling the elastic strain around nanoprecipiates

15:10 K.S. SURESH Twinning in the austenite phase of Ni rich NiTi shape memory alloys during hot deformation

C. SEEMÜLLER Influence of microstructural regularity of a directionally solidified NiAl-10Mo eutectic on creep behavior

I.A. PSARUK Low-temperature mechanical properties of ultrafine grained VT1-0 titanium alloy obtained by torsion extrusion

G. LAPLANCHE A TEM study of dislocations which form during the stress induced formation of martensite in pseudoealstic NiTi during nanoindentation

15:30 Poster Session I + Coffee

17:15 High Tea

18.00 Classical Dance Recital by Nrityagram, Venue: J.N. Tata Auditorium

Tuesday, 21st August

Plenary Session chaired by Dipankar Banerjee

9:00 JAVIER GIL SEVILLANO On the limit to strengthening by dislocation accumulation

9:30 JIRI SVOBODA Modelling of creep and rafting in Ni-based superalloy single crystals

10:00 Coffee

Session 3A: Atomistic & Microstructural Aspects of Plastic Deformation L. Toth

Session 3B: High Temperature Deformation TBD

Session 3C: Large and Severe Plastic Deformation A. D. Rollett

Session 3D: Cyclic Deformation and Fatigue S. Kumar

10:30 S. KARTHIKEYAN Factors controlling extension twinning in Mg alloys

G. SUNDARARAJAN Strengthening mechanisms in 9Cr ODS steel

R. MANNA (10:40 AM) Ultra high strength IF steel through equal channel angular pressing followed by cryorolling

EIICHI SATO Thermal fatigue of copper alloy for rocket engine component

11:00 CHANDAN MONDAL The influence of microstructure and texture on the work hardening behavior of a 7010 Al alloy sheet

UWE GLATZEL Secondary creep of thin-walled specimens affected by oxidation

R. EBRAHIMI Deformation behavior in vortex extrusion as a new severe plastic deformation technique

ALEXANDER GIERTLER Three-dimensional aspects of fatigue crack initiation in high- (HCF) and very-high-cycle-fatigue (VHCF) loaded duplex steel

11:20 SANKARAN SHANMUGAM Strength-microstructure-formability-texture relationships in new ferrite-martensite microalloyed steels

RAVI SANKAR KOTTADA Influence of Fe and Ni on creep behavior of commercially pure Ti

H. MIURA Comparisons of microstructure & mechanical properties of Cu-Zn alloys prepared by multi-directionally forging &

FATIMA RACHDI Prediction of the cyclic behavior of FCC polycrystals using mean-field homogenization

Tuesday, 21st August

heavy cold rolling

11:40 Coffee

12:00 M. DAMMAK Microstructural evolution and hardening behavior of iron based metal matrix composites submitted to simple shear

MICHAEL MILLS Characterization and Modeling of the Creep Behavior in a Nanocluster-Strengthened Ferritic Stainless Steel

SUHRIT MULA Formation of bulk copper based nanostructures by cryorolling and their mechanical properties

S. ANAND KUMAR Effect of surface mechanical attrition treatment duration on fatigue lives of Ti-6Al-4V

12:20 SHANTANU BEHERA Atomic structural features of grain boundary complexions in alumina

G. EGGELER TEM & synchrotron microtomography investigations of elementary deformation & damage processes which govern creep of short fibre reinforced Al-alloys

A. KAUFFMANN Tracking the twin formation in cryo-drawn copper

GAURAV SINGH Influence of minor addition of boron on tensile and fatigue properties of wrought Ti-6Al-4V alloy

12:40 N. DEVARAJAN Effect of Al concentration on the volume fraction of twinning in Mg-Al alloys

STEFFEN NEUMEIER Microstructure and creep strength of γ' hardened cobalt-base superalloys

JAY CHAKRABORTY Micro-mechanism of cementite dissolution in cold drawn eutectoid steel wires

BIAO CAI Porosity distribution and its effect on high temperature fatigue life in a Ni-base superalloy

13:00 Lunch

Plenary Session chaired by R. Narasimhan

14:00 ELLEN CERRETA Dynamic Experiments to Examine the Ductile Damage Process in Metallic Polycrystals

14:30 PANEL DISCUSSION I: Size Effects - Helena van Swygenhoven, Atul Chokshi, Tony Rollett

Tuesday, 21st August

Session 4A: Atomistic & Microstructural Aspects of Plastic Deformation E. Sato

Session 4B: High Temperature Deformation M. Mills

Session 4C: Large and Severe Plastic Deformation P. Kumar

Session 4D: Mechanical Behaviour at Micro and Nano Length Scales A. Dlouhy

15:15 J.-P.CHATEAU-CORNU In situ diffraction of high energy X-rays through a moving localization band during tensile tests on TWIP and TRIP steels

V. S. SARMA Compression creep behaviour of nanocluster strengthened Fe-Cr-Mo based ferritic ODS steels

BENOÎT BEAUSIR On the topology of microstructures from orientation maps

T.B. BRITTON Micromechanical deformation of commercially pure zirconium

15:35 S. BADIRUJJAMAN Effect of laser surface hardening on tensile properties of an automotive grade steel

D. JANDA Effect of strain-rate on the deformation mechanisms of D03 and B2 ordered iron aluminides

C. TRÄNKNER Texture evolution in NiAl deformed by high pressure torsion

ANDREAS MORTENSEN Cast aluminium microsamples: processing and tensile behaviour

15:55 GUOWEI YUAN Effects of pre-strain and recovery treatment on mechanical properties of TWIP steel

THOMAS SCHENK The high temperature Orowan stress in a rafted single crystalline superalloy: Experimental results from in situ XRD

AJIT PANIGRAHI SPD processed Ti-Nb alloys for orthopaedic applications

KENONG XIA Strengthening in Al matrix nanocomposites - Is it possible to produce aluminium as strong as steel?

16:15 Poster Session II + Coffee

18:15 High tea

Thursday, 23rd August

Plenary Session chaired by Wolfgang Pantleon

9:00 C. HUTCHINSON The cyclic deformation behaviour of precipitate strengthened Al alloys: experiments and modelling

9:30 CATE BRINSON Local polymer behavior in nanocomposites: chemistry vs confinement

10:00 Coffee

Session 5A: Atomistic & Microstructural Aspects of Plastic Deformation A. Mortenson

Session 5B: Adhesion, Interfacial Strength and Fracture R. Mitra

Session 5C: Large and Severe Plastic Deformation R. Ebrahimi

Session 5D: General Topics J. Vlassak

10:30 DANIEL WEYGAND Deformation mechanisms at the micrometer scale: Dislocation dynamics simulations and reality

S. V. KAMAT Fracture toughness behaviour of materials under mixed mode loading

MARC SEEFELDT Orientation fragmentation and work hardening at large plastic strains

T. ROUXEL What we can learn from elasticity about the atomic structure of glass: How it relates to the viscous behavior

11:00 W. SKROTZKI New experimental insights into the mechanisms of nanoplasticity

K. WACKERMANN Bulk and surface crack propagation of IN718 in the temperature range of dynamic embrittlement

Y. CHARLES Numerical study of the influence of matrix grain size on the damage of metal matrix composites

R. LAKSHMINARAYAN Effect of processing on the mechanical properties of Bulk Metallic Glass Composites

Thursday, 23rd August

11:20 E. BOUZY Determination of γ-γ' lattice misfit in a single-crystal nickel-based superalloy using convergent beam electron diffraction aided by finite element calculations.

BIDYAPATI MISHRA Ballistic impact behavior of high strength steels

S. GANGOLU Hot workability and flow characteristics of Al-5 wt% B4C particulate composite

C.-G. OERTEL Very low temperature ductile intermetallics

11:40 Coffee

12:00 A. A. PRASANNA Phase transitions and microstructure sensitive mechanical hardness in Heusler Ni39+xMn50Sn11-x (x≤2) alloys

SUGURU YOSHIDA Behavior of high temperature embrittlement and its mechanism in heat affected zone of low-carbon alloy steels

CHRISTOPH GAMMER Solid state amorphization of Co3Ti using high pressure torsion deformation

S. KOPACZ Tensile strength of pre-twinned Cu-Al single crystals

12:20 R. MADHAVAN Development of deformation texture in Nickel-Cobalt alloys

HIROKAZU KOIZUMI Embrittlement of polycrystalline silver induced by liquid gallium: Contact time and temperature dependence

S.R. DEY Responses from friction stir welding of dissimilar aluminum alloys with different pin shapes

K. ANANTHESHWARA In situ transmission electron microscopy study of wear

12:40 H. BANDYOPADHYAY Effect of strain path on microstructure and strain rate sensitivity of tantalum

NAGAMANI JAYA Novel microbeam bend geometry for fracture toughness determination of graded coatings

U. KLEMENT Retained austenite content and residual stresses in white layers formed during hard turning

MIROSLAV CIESLAR In-situ TEM observations of annealing processes in twin-roll cast aluminium alloys

13:00 Lunch

Plenary Session chaired by Werner Skrotzki

14:00 MARC LEGROS Small-scale plasticity: the input of in situ transmission electron microscopy

Thursday, 23rd August

14:30 VLADIMIR NIKOLAEV Shape Memory Deformation and Reactive Stress Generation in Single Crystal Alloys

Session 6A: Atomistic & Microstructural Aspects of Plastic Deformation P. Pant

Session 6B: Mechanical Properties related to Phase Transformations S. Sankaran

Session 6C: Mechanical properties of Structural Ceramics B. Basu

Session 6D: General Topics M. S. Bobji

15.00 DANIEL CAILLARD An in situ study of dislocation kinetics in Fe and Fe alloys at low temperatures

MAHESH C. SOMANI Process design for ultra-high strength structural steels using direct quenching and partitioning

IVAR REIMANIS Pressure-induced phase transformation in β-eucryptite to impart toughening in ceramics

P.D. LEE Damage accumulation during the hot deformation of free cutting steels

15:20 ANTONIN DLOUHY Diffusion assisted migration of dislocation walls analysed by 3D simulations

J. TAKAHASHI Study on particle strengthening mechanism of copper precipitation steel by atom probe tomography analysis

R. MITRA Mechanical behavior of ZrB2 and HfB2 based ultra-high tempeature ceramic composites

R. SHABADI Comparative study of precipitation in Fe-1.2%Cu and Fe-1.2%Cu-250ppmC model alloys

15:40 S.E. RESTREPO Grain boundary - dislocation interaction: Linking molecular dynamics and dislocation dynamics

H.-J. CHRIST Strain-induced martensite formation in metastable austenitic stainless steel – effect of temperature, strain rate and straining direction changes

KIRAN AKELLA A parametric study on the toughness of layered ceramics

VIVEK SRIVASTAVA Threshold stress intensity factor of ship building steel at various frequencies under freely corroding condition in 3.5 wt% NaCl

16:00 RAJESH KORLA Study of tension compression asymmetry in the γ surfaces of special boundaries of al using molecular dynamic simulations

T. FURUTA Mechanical properties of ultrahigh strength Fe-Ni based alloys with lattice softening

B.VENKATESWARLU Synthesis of ZnO of surface tailored nanostructure for materials strengthening applications

SOMJEET BISWAS Microstructure - mechanical property correlation of high pressure die cast AZ91 magnesium alloy

Thursday, 23rd August

16:20 Coffee

Session 6C*: Strength of Biological Systems and Biomaterials

Session 6D*: Mechanical Behaviour at Micro and Nano Length Scales

16:40 S. PRADEEP Influence of microstructural layers on the superplastic behaviour of friction stir processed 5086 Al alloy

JAROMÍR KOPEČEK Pseudoelasticity in Co38Ni33Al29 alloy

F. TANCRET Influence of processing and microstructure on toughness and strength reliability of calcium phosphate cements for bone substitution

H. VAN SWYGENHOVEN Slip in directionally solidified Mo-alloy micropillars

17:00 L. THILLY In-situ deformation under neutrons or x-rays as a tool to uncover the deformation mechanisms of complex materials

R. PRASATH BABU Effect of stress orientation on evolution of C14 Laves phase during creep of a fully lamellar TiAl alloy

J. STRASKY The effect of iron and silicon additions on mechanical properties of TNTZ beta titanium alloy for biomedical use

INDRANI SEN Nanoindentation study of NiTi shape memory alloys

Friday, 24th August

Plenary Session chaired by Daniel Caillard

9:00 CHRISTOPHER SCHUH Mechanical Behavior of Nanocrystalline Alloys with Grain Sizes Approaching the Amorphous Limit

9:30 Panel Discussion II: Experiments and Modeling Linkages: Mike Mills, Dipankar Banerjee, Daniel Weygand

10:00 Coffee

Session 7A: General Topics R. Shabadi

Session 7B: General Topics S. Kailas

Session 7C: General Topics T. Murthy

Session 7D: Mechanical Behaviour at Micro and Nano Length Scales I. Reimanis

10:30 CHRISTOPH EBERL Probing materials' properties and reliability at the micro and nano scale and the need for new experiments

UMESH WAGHMARE Soft modes, hyper-elasticity, dynamical crack instability and mechanical failure in simple crystals

DANIEL GIANOLA Deformation mechanism metallic nanowire

11:00 KOHSAKU USHIODA Influence of carbon in solid solution and cementite density on ductility in low-carbon steel sheet

HEIKE GABRISCH Evolution of nanoscale-modulated structures in a PM-TiAl-alloy

P. BISWAS Void growth near a notch tip in single crystals: Experiments and simulations

PRADIPTA GHOSH Deformation dynamics during microplastic deformation of Nanocrystalline nickel

Friday, 24th August

11:20 ELISA CANTERGIANI Functionally graded material: carbon gradient on IF steel

PRITA PANT Microstructure and tensile deformation behaviour of Ti-6Al-4V alloy

SANKARI SAMPATH Role of coherency strain in the stabilization of a metastable precipitate of the Mo-C binary system

SRINIVASA R. BAKSHI Effect of carbon nanotube dispersion on mechanical properties of powder metallurgy processed Al-CNT composites

11:40 Coffee

12:00 M. GALCERAN Microstructural characterization of TWIP steels using automated orientation mapping in a TEM

S. MESSAOUDI Energy Stored and Progress of the Reaction of Recrystallization

GERALD POLT Dislocation Contrast Factors of Semicrystalline Polymers

JOOST J. VLASSAK A combinatorial technique for the calorimetric analysis of nanoscale quantities of materials

12:20 SANKARA SUBRAMANIAN Eigenfunction Virtual Fields Method for Determination of Material Properties from Full-Field Deformation Data

DMITRY BACHURIN Atomistic simulation of the deformation of nanocrystalline palladium: The effect of voids

MANISH PATEL Effect of oxidation on room temperature strength of zirconium diboride (ZrB2)

S.VAN PETEGEM Yield point phenomenon in nanocrystalline Ni-Fe investigated by in-situ x-ray diffraction

12:40 Closing Ceremony and Vote of Thanks

13:00 Lunch

Useful contact information:

Le Meridien Hotel: (080) 2226 2233, (080) 2228 2828

Chevron Orchards: (080) 40952255

United Theological College: (080) 2333 3438/0502

IISc Guest House: (080) 2293 2311/2289

Jawahar Guest House: (080) 2293 2499

IISc Security: (080) 2293 2841

IISc Health Center: (080) 2293 2234/2227

ICSMA Transport: 9916967200 (Praveen C. Ramamurthy)

ICSMA Hall Management and Registration: 9449814848 (S. Karthikeyan)

Organized by: Indian Institute of Science