Program Kick- off Meeting „NANOSTIR“ - IZES gGmbH · 1/30/2008 · IZES technical test centre for small ... Saarland. DAP-PL-3450.00. 4 IZES gGmbH Our focus:-Tomorrow's energy

1

Program Kick- off Meeting „NANOSTIR“

No. time agenda Tuesday 29.01.2008

1 12:30 - 14:00

arrival in Tulln; lunch

14:00 - 16:00

2 address of welcome by Dir. Meisl

3 address of welcome by the Coordinator

4 short introduction of the partners and the role within NANOSTIR

5 16:00 - 17:00

coffee break

17:00 - 19:30

6 on site inspection of LFS

7 presentation of the work packages

8 discussion of the work steps / tasks

definition of technical interfaces

detailing of the work plan

detailing of the timetable concerning the work steps / tasks

9 revision of the timetable and the work plan

10 definition of work groups & contents for Wednesday

19:30

11 coming together

2

Kick- off Meeting „NANOSTIR“

Optimisation of solid biofuel operated Stirling CHP unjits by means of nano technological

coatings

- NANOSTIR -

Tulln, 29. / 30. January 2008

3

Institut für ZukunftsEnergieSystemean der Hochschule für Technik und Wirtschaft HTW

IZES test laboratory on site the university of applied science, Saarbrücken. It is accredited for solar thermal collectors, components and systems.

IZES headquarter located in the ‚IT Park‘ in Saarbrücken/ Burbach, Federal State Saarland Germany.

IZES technical test centre for small combined heat and power units in Völklingen/ Luisenthal, Saarland.

DAP-PL-3450.00

4

IZES gGmbH

Our focus:

-Tomorrow's energy supply and energy usage

-Input to policy and legislation in the energy sector

-Renewable energies and efficient utilisation of useful energy

Our staff:

At about 25 colleagues from mechanical, energy, electrical and

civil engineering scope. Also physicists, chemists, economists and

social scientists are working at the IZES.

IZES (Institute for FutureEnergySystems) is a research institute connected to the Saarland University of Applied Sciences.It is a non-profit limited company.

5

IZES main areas of activities

Energy economy / future markets

Accredited laboratory: “Test Centre Saarbrücken, TZSB”

Material flow management / biomass usage

Energy system engineering, including ‘Technique Centre Luisenthal, TEZI’

DAP-PL-3450.00

6

IZES projects concerning Stirling engines operated with biofuels

Monitoring of a SOLO V161 Stirling engine operated with mine gas

7

Results SOLO V161 operated with caol mine gas

Leistungen bei 65°C/50°C

0

5

10

15

20

25

30

35

50 bar 70 bar 90 bar 110 bar 130 barMaschinendruck

kW

Q-gesamt

Q-thermisch

Q-elektrischp-elektrisch

Pel = 7,9 kW

Qtherm = 22,9 kW

electrical and thermal power output against Helium pressure inside the engine for a return temperature of ~ 50°C

8

0%

20%

40%

60%

80%

100%

50 bar 70 bar 90 bar 110 bar 130 bar

eta gesamt

eta therm.

eta elektr.

eta

Maschinendruck

ηel = 24,4 %

ηges = 95,4 %

ηth = 71,0 %

electrical and thermal efficiency against Helium pressure inside the engine for a return temperature of ~ 50°C

Results SOLO V161 operated with caol mine gas

9

HOVAL boiler Stirling combination

Monitoring of a combination of a HOVAL AgroLyt 25 boiler and a 1 kWel Stirling engine made by Bernd Kammerich

Site: Sulzbach, Germany Forester’s house, including one family apartment

10

Schematic draw of the hydraulic installations in Sulzbach

11

Stirling / boiler connection

12

Stirling / boiler connection

13



1 12:30 - 14:00


14:00 - 16:00




5 16:00 - 17:00

coffee break

17:00 - 19:30









19:30

11 coming together

14

History of NANOSTIR

� December 2005:

Project proposal of the NANOSTIR project was prepared in the call of the EU - SIXTH FRAMEWORK PROGRAMME:

Polygeneration – SPECIFIC TARGETED RESEARCH PROJECT

� June 2006: Positive evaluation with 28/30 points

� November 2007: Final negotiation with the EU and the partner Consortium

� December 2007: contract will be signed

� January 2008: official start date 15.01.2008; kick-off meeting

� Duration of the NANOSTIR project: 24 months

� NANOSTIR – budget 741 TEuro, 298 TEuro EU-contribution

15

Partic. Role

Partic. No.

Participant name Participant short name

Country Date enter

project

Date exit

project CO 1 Co-ordination: IZES

gGmbH IZES Germany Month

1 Month

24 CR 2 Landwirtschaftliche

Fachschule Tulln LFS Austria Month

1 Month

24 CR 3 Biokompakt

Heizsysteme GmbH BIOCOMP Austria Month

1 Month

24 CR 4 ItN Nanovation AG ItN Germany Month

1 Month

24

CR 5 Kuhbier Law firm KLF Belgium Month 1

Month 24

CR 6 WEGRA Anlagenbau GmbH

WEGRA Germany Month 1

Month 24

NANOSTIR Partner

16

NANOSTIR Work packages

17

WP 0: Coordination

Work package leader: IZES

Person months: 2,15

Start/end: duration time 1 -24 month

Tasks:•WP 0-1: Day-to-day coordination and representation of the main interface to the EC•WP 0-2: Supervision of the project planning, progress and related reporting•WP 0-3: Supervision of the ongoing work and its termination in time

18

WP 1: Construction of the biofuel CHP unit

Work package leader: LFS / BIOKOM

Person months: IZES 1; LFS 2; BIOKOM 3; ItN 2; overall 8

Start/end: duration time 1 – 6 month

Tasks:•WP 1-1: Adaptation of the solid biofuels boiler concerning the technical requirements of the Stirling engine•WP 1-2: Construction of the solid biofuels boiler/Stirling engine CHP unit•WP 1-3: Adaptation of the monitoring program to the requirements CHP unit •WP 1-4: Adaptation of a control unit to the CHP unit•WP 1-5: Adaptation of the measurement equipment to the requirements of the CHP unit •WP 1-6: Putting into operation, plant management and maintenance of the CHP unit

19

WP 2: Development and optimisation of a coating material

Work package leader: ItN

Person months: IZES 0,5; LFS 1; ItN 10; overall 11,5


Tasks:•WP 2-1: Screening of different existing coating materials •WP 2-2: Laboratory development of nanoparticle based coating materials to prevent pollution on the Stirling’s primary heat exchanger, •WP 2-3: Pre-tests to evaluate the developed material with regard to coating quality, heat exchange, temperature constancy and pollution by biofuel exhaust, application on dummy metallic substrates•WP 2-4: First coating of the Stirling engine and evaluation of the results•WP 2-5: Optimisation of the coating material•WP 2-6: New coating with a second monitoring •WP 2-7: Final coating of heat exchanger and the air pre- heating tubes for the combustion air

20

WP 3: Construction of the CHCP unit

Work package leader: BIOKOM

Person months: IZES 1; LFS 2; BIOKOM 2; ItN 2, WEGRA 3


Tasks:WP 3-1: The two individual systems (solid biofuels boiler/Stirling engine and absorption cooling machine) will be optimised for a combined operationWP 3-2: Combination of the two separate systemsWP 3-3: Optimisation of the combined CHCP unit based on the outcome of WP4WP 3-4: Market analysis for the combined CHCP unit

21

WP 4: Monitoring of the CHCP unit


Person months: IZES 4,5; LFS 2; BIOKOM 1; ItN 2; WEGRA 1


Tasks:WP 4-1: Definition of the detailed monitoring programWP 4-2: Design and definition of the measurement technique WP 4-3: Monitoring of the CHCP unit and supervision of the monitoringprogram itselfWP 4-4: Preparation of the gained data for the dissemination process and the final know-how transfer measures

22

WP 5: Ethical and legal audit

Work package leader: KLF

Person months: KLF 3,5


Tasks:WP 5-1: Investigation of the actual and planned political and legal prevailing conditions of the European Commission and in the member states.WP 5-2: Compiling of the individual ethical positions of the European member statesWP 5-3: Confrontation of these developments with the goals of emission reduction in EuropeWP 5-4: Market analysis of the effects of biofuels on agriculture and the fuel market

23

WP 6: Dissemination program


Person months: IZES 4; LFS 1; BIOKOM 1; ItN 4; KLF 1; WEGRA 1


Tasks:WP 6-1: Dissemination strategyWP 6-2: Integration of comparable project resultsWP 6-3: Creation and continuous actualisation of the project’s homepageWP 6-4: Publication measuresWP 6-5: Organisation of national workshopsWP 6-6: Organisation of a final transnational congress

24


� planned meetings with external participants (according to the proposal)

- Final meeting

• All partners and the EC responsible; this meeting should be in connection with the final transnational congress

• Meeting with the advisory board (external Stirling technology experts); this meeting should be in connection with the “mid time workshop”

� planned dissemination activities (according to the proposal)- web-/ homepage in German and English

- At least two national workshops (this meetings should be in connection with the meeting with the advisory board (SB) and the putting into operation of the CHCP unit)

- one final transnational congress (this meeting should be in connection with the final project meeting)

25


� Preparation of a business plan for the commercialisation of the CHCP unit (according to the proposal)

- Two possibilities

• The CHC unit (as a combined unit with components from BIOKOM an WEGRA)

• THE CHCP unit (as a combined unit with components from BIOKOM, WEGRA and EnergieBig)

� publication activities (according to the proposal)- At least one paper in an international Journal, e.g. J. of Power Sources

or Renewable Energy or …

- Brochures and information material concerning NANOSTIR in Germanand English language

26

IZES gGmbH (D)

Coordination

KLF (BE)Ethical and Legal Audit

concerning biofuels

WEGRA GmbH (DE)

Absorption cooling machine

ItN (DE)

Coating materials

NANOSTIR Partner interfaces

direct report

LFS Tulln (AT)

Operator and owner ofthe Stirling unit

Biokompakt GmbH (AT)

Biofuel boiler

construction of the CHP unit

integration of theabsorption unit to get the CHCP unit

developm

ent of a

coating

mate

rial

EC

direct report

administrative and financial

reports of the tasks to the WP leader and WP reports to the coordinator

27



1 12:30 - 14:00


14:00 - 16:00




5 16:00 - 17:00

coffee break

17:00 - 19:30









19:30

11 coming together

28

Nr. Vorgangsname

1 WP 0:COORDINATION, PROJECT MANAGEMENT AND REPORTING

2 WP 0-1: Kick-off meeting

3 WP 0-2: Supervision of the project planning, progress and related reporting

4 WP 0-3: Supervision of the ongoing w ork and its termination in time

5 M 0-1: Kick-off meeting

6 M 0-2: Mid-term assessment report and meeting of the advisory board

7 M 0-3: Final meeting and final report

8 WP 1: CONSTRUCTION OF THE BIOFUEL CHP UNIT

9 WP 1-1:Adaptation of the s olid biofuels boiler concerning the technical requirements of the Sterling engine

10 WP 1-2: Construction of the solid biofuels boiler/Stirling engine CHP unit

11 WP 1-3: Adaptation of the monitoring program to the requirements CHP unit

12 WP 1-4: Adaptation of a control unit to the CHP unit

13 WP 1-5: Adaptation of the measurement equipment to the requirements of the CHP unit

14 WP 1-6: Putting into operation, plant management and maintenance of the CHP unit

15 M 1-1: Successful putting into operation of the constructed combined unit consisting of a solid biofuel boiler and a Stirling engine

16 WP 2: DEVELOPMENT AND OPTIMISATION OF A COATING MATERIAL

17 WP 2-1: Screening of dif ferent existing coating materials

18 WP 2-2: Laboratory development of nanoparticle based coating materials to prevent pollution on the Stirling’s primary heat exchanger

19 WP 2-3: Pre-tests to evaluate the developed material w ith regard to coating quality , heat exchange, temperature constancy and pollution by biofuel exhaust, application on dummy metallic substrates

20 WP 2-4: First coating of the Stirling engine and evaluation of the monitoring results

21 WP 2-5: Optimisation of the coating material

22 WP 2-6: New coating w ith a second monitoring

23 WP 2-7: Final coating of heat exchanger and the air pre- heating tubes for the combustion air

24 M 2-1: First coating of the Stirling’s primary heat exchanger

25 M 2-2: Final coating of the Stirling’s primary heat exchanger w ith optimised coating material

26 WP 3: CONSTRUCTION OF THE CHCP UNIT

27 WP 3-1: The tw o individual systems (solid biofuels boiler/Stirling engine and absorption cooling machine) w ill be optimised for a combined operation

28 WP 3-2: Combination of the tw o separate systems

29 WP 3-3: Optimisation of the combined CHCP unit based on the outcome of WP4

30 WP 3-4: Market analysis for the combined CHCP unit

31 M 3-1: Successful putting into operation of the constructed CHCP unit consisting of a solid biofuel boiler, a Stirling engine and an absorption cooling machine

32 WP 4: MONITORING OF THE CHCP UNIT

33 WP 4-1: Def inition of the required concise and complete monitoring program

34 WP 4-2: Design of the meas urement technique

35 WP 4-3: Monitoring of the CHCP unit and supervision of the monitoring program its elf

36 WP 4-4: Preparation of the gained data for the dissemination process and the f inal know -how transfer measures

37 M 4-1: Start of the active monitoring phase

38 WP 5: ETHICAL AND LEGAL AUDIT

39 WP 5-1: Investigation of the actual and planned political and legal prevailing condit ions of the European Commission and in the member s tates

40 WP 5-2: Compiling of the individual ethical positions of the European member states

41 WP 5-3: Confrontation of these developments w ith the goals of emission reduction in Europe

42 WP 5-4: Market analysis of the effects of biofuels on agriculture and the fuel market

43 M 5-1: Presentation of the s tudy “Ethical and legal status concerning biofuels as useful energy sources in Europe”

44 WP 6: DISSEMINATION PROGRAM

45 WP 6-1: Dissemination strategy

46 WP 6-2: Integration of comparable project results

47 WP 6-3: Creation and continuous actualisation of the project’s homepage

48 WP 6-4: Publication measures

49 WP 6-5: Organisation of national w orkshops

50 WP 6-6: Organisation of a f inal transnational congress

51 M 6-1: Launch of the projec t’s homepage

52 M 6-2: At least one article in an international journal concerning the protection of the Stirling’s heat exchanger by means of nanotechnological coating material

53 M 6-3: At least one article in an international journal concerning the CHCP unit

31.10.

30.09.

30.09.

02.04.

01.05.

01.10.

01.10.

01.10.

01.08.

01.05.

30.09.

30.09.

Jul '06 Sep '06 Nov '06 Jan '07 Mrz '07 Mai '07 Jul '07 Sep '07 Nov '07 Jan '08 Mrz '08 Mai '08 Jul '08 Sep '08 Nov '08Month 1 Month 4 Month 7 Month 10 Month13 Month 16 Month19 Month 22 Month 24

Month 1 Month 13 Month 24

Month 24

Month 13

Month 13

Month 13

Month 6

Month 7

Month 7

Month 22

Nr. Vorgangsname






















































31.10.

30.09.

30.09.

02.04.

01.05.

01.10.

01.10.

01.10.

01.08.

01.05.

30.09.

30.09.

Jul '06 Sep '06 Nov '06 Jan '07 Mrz '07 Mai '07 Jul '07 Sep '07 Nov '07 Jan '08 Mrz '08 Mai '08 Jul '08 Sep '08 Nov '08Month 1 Month 4 Month 7 Month 10 Month13 Month 16 Month19 Month 22 Month 24 Nr. Vorgangsname






















































31.10.

30.09.

30.09.

02.04.

01.05.

01.10.

01.10.

01.10.

01.08.

01.05.

30.09.

30.09.

Jul '06 Sep '06 Nov '06 Jan '07 Mrz '07 Mai '07 Jul '07 Sep '07 Nov '07 Jan '08 Mrz '08 Mai '08 Jul '08 Sep '08 Nov '08Month 1 Month 4 Month 7 Month 10 Month13 Month 16 Month19 Month 22 Month 24

Month 1 Month 13 Month 24

Month 24

Month 13

Month 13

Month 13

Month 6

Month 7

Month 7

Month 22

29

NANOSTIR Project - Meetings

� planned Meetings (according to the proposal)

- Kick off meeting ��

- Regular meetings

• At least one meeting between the coordinator and the WP leader for each WP

- Workshops

• At least two workshops with all partners (mid time workshop and one more meeting)

- Final meeting

• All partners and the EC responsible (this meeting should be in connection with the final transnational congress)

- Are more meetings necessary?

30

NANOSTIR: open questions

Energiebig

Contribution to project?

Advisory board with extern Stirling technology experts

Date and place for the Workshop/ Meeting?

31

EU-reports- Mid-term report (January 2009)- Final report including the financial report (January 2010)Internal reports as part of the EU reports:- WP-reports every 6 months (responsible are the WP-Leader and Task-Leader)-Deadline first WP-report on the 15.07.2008Language

-German or English?-Internal: German, Concerning any EC communication: English

WP responsibilities/ reports/ language

Responsibilities- coordination Bodo Groß, IZES- Work package (WP) leaderBodo Groß, IZES WP 0, 4, 6; Josef Meisl, LFS WP 1Frank Meyer WP 2; Ernst Gerlinger WP 1, 3Dörte Fouquet WP 5

32

EU project officer: Mrs. Anthi Charalambous(Tel: +32 (2) 29 – 52582, [email protected])

EU financial officer: Mrs. Esther Grau-Jimenez(Tel: +32 (2) 29 – 50805, [email protected])

Responsible EC officers

33

Kick- off Meeting „NANOSTIR“

Thank you!

34


No. time agenda Wednesday 30.01.2008

12 9:00 - 11:30

discussion of the work steps / tasks within the individual work groups

11:30 - 12:30

13 summary of results; decision of a To-Do list

12:30 - 14:00

14 lunch

14:00

15 departure from Tulln or optional guided tour of the city of Tulln

35



1 12:30 - 14:00


14:00 - 16:00




5 16:00 - 17:00

coffee break

17:00 - 19:30









19:30

11 coming together

36

Documents

Program Kick- off Meeting „NANOSTIR“ - IZES gGmbH · 1/30/2008 · IZES technical test centre for small ... Saarland. DAP-PL-3450.00. 4 IZES gGmbH Our focus:-Tomorrow's energy