Embed Size (px)
Citation preview
SC UPETROM - 1 MAI SAST1 December 1918 Square No. 1
Ploiesti, Prahova County, RomaniaPhone: +40 244 501 501
+40 244 501 502Fax: +40 244 501 503
PROGRESSIVECAVITY PUMPS
SCOPE
PEU X-Y-S-ZThe progressive cavity pumps are utilized for production and allow the oil recovery to be feasible from the oil deposits of mean depth (viscous oil or oils containing a max. 2% of impurities).
The conventional mean life afferent to the-above specified pumps lasts 12 (twelve) months.
PEU278 120S4
PEU350 120S7
PEU350 120S10
PEU350 120S16
*PEU400 100S30
*PEU400 120S30
Threadconnector(rotor to sucker
rod), a (in)
1 3/16
Threadconnect(rotor to
sub),B (in)
1 3/16
1 3/8
Lowerthread
(pump toanchor),
C (in)
UPTBG 2 7/8
SR ISO10422/98
Upperthread
(pump totubing),D (in)
UPTBG 2 7/8
UPTBG3 1/2
SR ISO10422/98
StatorOD
E (mm)
73
88,9
88,9
88,9
108
PumpOD
F (mm)
88
106
108
StatorlengthG (mm)
3,000
3,400
3,800
3,500
3,800
4,900
RotorlengthH (mm)
3,400
4,100
5,400
Pump Design Specifications
PROGRESSIVE CAVITY PUMPS
1. 1 (one) rotor.
Pump Components
350 (3 )½ 120 S 10
350 (3 )½
400 (4 )½
100
100
S
S
16
30
Symbol
PEU X-Y-S-Z PEU
350 (3½) 120 S
S
S
S
7
UPETRQM-made pump type
Outer diameter,X (in)
Placementdepth, y (x 10 m)
Type of profile(s - simple)
Max. flow rate,3Z/100 rpm (m / 24h)
2. 1 (one) stator.
www.upetrom1mai.com
Warranty
Transport, Packing and Protection
The warranty period covers 12 (twelve) months from the date of the pump Commissioning.
When the product is to be delivered,it shall be packed into a wooden case and attached to the yokes. The surfaces are protected against corrosion by painting or chromium plating. The transport shall be provided through adequate means capable to allow a product of excessive length to be transported under max. safety conditions.
Main specifications
Working Presure (bar)Speed(rpm) 140
100
170
220
PEU278 120S4
PEU278 120S7
PEU350 100S10
PEU350 120S10
PEU350 100S16
PEU350 120S16
PEU400 100S33
PEU400 120S33
PEU278 120S4
PEU278 120S7
PEU350 100S10
PEU350 120S10
PEU350 100S16
PEU350 120S16
PEU400 100S33
PEU400 120S33
PEU278 120S4
PEU278 120S7
PEU350 100S10
PEU350 120S10
PEU400 100S33
PEU400 120S33
0
4.2
7.32
10
10.9
16
16
33
33.2
7.14
12
17
17.6
25.8
26.2
56
56.78
9.24
15.7
24
24
33
33.3
20
4.1
7.2
9.8
10.93
15.8
16
33
33.1
6.97
11.67
16.8
17.63
25.8
26.2
56.2
56.5
8.97
15.7
23.8
24
33
33.3
40
4.05
6.85
9.8
10.93
15.8
16
32.9
33.1
6.88
11.67
16.8
17.63
25.4
26.2
56.1
56.5
8.82
15.42
23.8
24
32.5
33.3
60
4
6.75
9.4
10.8
15.4
16
32.8
33
6.7
11.52
16.4
17.63
25
26.2
55.9
56.1
8.52
15.42
23.4
24
32.4
33.3
80
3.95
6.64
9.2
10.8
15.3
15.4
32.7
32.9
6.7
11.36
16.2
17.63
24.7
26.2
55.7
56.2
8.46
15.15
23.2
23.3
32
33.3
100
3.90
6.54
8.5
10.8
15.2
15.2
32.7
32.8
6.63
11.07
16
17.28
24.3
26.2
55.6
55.8
8.3
14.64
23
22.7
31.6
33.3
120
3.8
6.44
8
10.66
14.8
15.2
32.4
32.7
6.46
10.93
15.5
17.28
24
25.4
55.4
55.6
8,27
14.4
22.8
22
31.2
33.3
3.7
6.44
7.8
10.6
14.1
15.1
32.6
6.29
10.8
15.2
17.2
23.8
25.4
55.5
8,01
13.9
21
22
30.5
33.3
Pump type
-
-
Flow rate (mc/24h)
PEU350 100S16
PEU350 120S16
71
71.5
71
72
65.4
66.46
65.2
66.46
65
66.46
60.2
61.71
55
57.6
-
57.2
Marking the components consists in stamping through a stamp whose letter height covers 6 mm.
Component Marking
