ERouting EIGRP PT Practice SBAA few things to keep in rrind while COl1llleting this activity:

1. Do not use the browser Back button or close or reload any Exam windows during the exam2. Do not close Packet Tracer when you are done. It wiDclose automatically.3. Click the Submit Assessment button to subrrit your work.

IntroductionIn this Packet Tracer Practice Skills-based Assessrrent, you will:

- corrplete the configuration of a partially configured network- establish connectivity to the West Region and the Internet through the use of static and dynamic routing- verify connectivity

Addressing Table

EastHQ 50/0/0 N/A

50/0/1 N/A

50/1/0 N/A

50/1/1 N/AE-Branchl FaO/O 192.168.0.1 255.255.255.128 N/A

FaO/1 192.168.0.129 255.255.255.128 N/A

50/0/0 192.168.1. 250 255.255.255.252 N/A

50/0/1 192.168.1.245 255.255.255.252 N/A

E-Branch2 FaO/O 192.168.1.1 255.255.255.192 N/A

FaO/l 192.168.1.65 255.255.255.192 N/A

50/0/0 192.168.1. 254 255.255.255.252 N/A

50/0/1 192.168.1.246 255.255.255.252 N/A

EPCl NIC 192.168.0.2 255.255.255.128 192.168.0.1

EPC2 NIC

EPC3 NIC 192.168.1. 2 255.255.255.192 192.168.1.1

EPC4 NIC

NetAdrrin NIC 192.168.1.66 255.255.255.192 192.168.1. 65

Note: The password for user EXECnude is cisco. The password for privileged EXECnude is class.

Step 1: Configure the Device Basics.

Note: Initially, you can only access router E-Branch2 through the console connection on NetAdrrin.

a. Configure the following on E-Branch2:

-00000000 The router narre is EB2.

-00000000 The privileged EXECnude uses the following encrypted password: class.

-00000000 Enable Telnet and console line Iogins and use the following password: cisco.

-00000000 Configure the banner rressage-of-the-day as Authorized access only!

b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2.

c. Configure correct host IP addressing.

1

-DDDODDDD Configure EPC2with the last IP address in the subnet.

eDDDDDDDD Configure EPC4with the last IP address in the subnet.

Step 2: Discover the Network.

a. Explore the network to deterrrine the IP address of the serial interface that EastHQuses to connect to E-Branch2.

b. Rerrotely access EastHQ.

Step 3: Conf"lgureStatic and Default Routing.

a. Configure connectivity to the West Region.

-DDDDDDDO Configure a static route on EastHQto the entire West Region. The West Region uses the 172.16.100.0/24 address space.Use the next-hop address argument.

-DDDDDDDD Configure a default route on EastHQto send to the Internet all other traffic for destinations that are not found in theEastHQrouting table. Use the exit interface argument.

b. 'krify static and default routing.

Step 4: Conf"lgureEIGRP Routing.

Configure EIGRPon EastHQ, E-Branch1, and E-Branch2.

a. Use AS nunber 100.

b. Do not advertise the network between EastHQand the Internet.

c. Do not advertise the network between EastHQand the West Region.

d. Advertise all other attached networks.

e. Disableautorretic surnrrerization.

f. Disable EIGRPupdates out interfaces where there are no EIGRPneighbors available.

g. On EastHQ, enter the one cornrrend in the EIGRProuting process that will propagate the default and static routes to E-Branch1and E-Branch2.

Step 5: Modify the default EIGRP operation.

a. Configure the link between EastHQand E-Branch2so that the correct bandwidth of 384 k/s is used in EIGRPcalculations.

b. Configure E-Branch1to advertise a surnrrery route for the subnets 192.168. O.0/25 and 192.168.0.128/25 to EastHQand E-Branch2.

c. Configure E-Branch2to advertise a surnrrery route for the subnets 192.168.1. 0/26 and 192.168.1.64/26 to EastHQand E-Branch1.

Step 6: Verify Full Connectivity.

Although these are not scored, the following connectivity tests should be successful.

-DDDODDDD Test connectivity to the West Region.

-DDODDDDD Test connectivity to the Internet.

FormSCreated in Packet 'Tracer5.3. 2. 0027 and MalVel1. 0.1All contents are Copyright@ 1992 - 2011 Cisco systens. Inc. All rights reserved. This doasrent is Cisco Public Intometo»,

2

West Region!n,16, 100,0/24

Server-PTPayroll

In 16, 100, 194

:---_\(

sta"cRoute192,168,0,0/2)

EB1Sw2PUTEPC2

Q2, 168, 1.0/26

JPC-PTEPC3

192,168,1.2

.92,168,1.6 /26

E82Sw2PC·PTEPC4