Embed Size (px)
Citation preview
Turn
in
g Your Assets into Dollars
Public AuctionPLANT
CLOSED
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325
PLANT CLOSED
H&H MACHINE
(2) HEM H-90-A-1 HORIZONTAL BANDSAWS
(2) HAAS ST-30 CNC TURNING CENTERS
(21) HAAS SL-20T CNC TURNING CENTERS
HAAS VF-2D CNC VERTICAL MACHINING CENTER
2AVAIL.
21AVAIL.
TO2008
2AVAIL. 2011
2010
HUGE HAAS AUCTION!! 40+ HAAS ST30, SL20T & SL10 CNC LATHES,MILLING MACHINES & SUPPORT MACHINERY
2403 COUNTY LANE 137 - CARTHAGE, MO 64836TUESDAY, JUNE 21ST @ 10:00 A.M. CDT
Inspection: Monday, June 20th, From 8:00 A.M. - 4:00 P.M. CDT
2008
104479_HH Machine.indd 1 5/24/16 9:27 AM
MACHINERY INSPECTION DATE & TIME – MONDAY, JUNE 20TH FROM 8:00 A.M. - 4:00 P.M. CDT
2
(2) HAAS ST-30 CNC TURNING CENTERS
2AVAIL.
2010
(2) HAAS SL-30T CNC TURNING CENTERS
2AVAIL.
2002
(44) CNC TURNING CENTERS(2) HAAS Model ST-30 CNC Turning Centers with 10” 3-Jaw Chuck, Approx. 34” Centers, Tailstock, 12 Position Turret, 3.5” Spindle Bore, Chip Conveyor, HAAS CNC Control, sn:3086562, mfg.2010 ● sn:3086577, mfg.2010
(2) HAAS Model SL-30T CNC Turning Centers with 10” 3-Jaw Chuck, Approx. 34” Centers, Tailstock, 12 Position Turret, 3” Spindle Bore, Chip Auger, HAAS CNC Control, sn:64772, mfg.2002 ● sn:65002, mfg.2002
(6) HAAS Model ST-20 CNC Turning Centers with Collet Chuck, Approx. 24” Centers, Tailstock, 10 Position Turret, 3” Spindle Bore, Chip Conveyor, HAAS CNC Control, Sludge Tank, sn:3089256, mfg.2011 ● sn:3089239, mfg.2011 ● sn:3089241, mfg.2011 ● sn:3089240, mfg.2011 ● sn:3086578, mfg.2010 ● sn:3086570, mfg.2010
(6) HAAS Model SL-20T CNC Turning Centers with 8” 3-Jaw Chuck, Approx. 24” Centers, Tailstock, 10 Position Turret, Spindle Bore, Chip Auger, HAAS CNC Control, sn:3082863, mfg.2008 ● sn:3082861, mfg.2008 ● sn:69352, mfg.2005 ● sn:69372, mfg. 2005 ● sn:67488, mfg.2004 ● sn:67480, mfg.2004
(14) HAAS Model SL-20T CNC Turning Centers with Collet Chuck, Approx. 24” Centers, Tailstock, 10 Position Turret, 3” Spindle Bore, Chip Auger, HAAS CNC Control, sn:3082930, mfg.2008 ● sn:3082862, mfg.2008 ● sn:72799, mfg.2006 ● sn:72801, mfg.2006 ● sn:69669, mfg.2005 ● sn:69653, mfg.2005 ● sn:68305, mfg.2004 ● sn:68306, mfg.2004 ● sn:67487, mfg.2004 ● sn:65099, mfg.2002 ● sn:63032, mfg.2000 ● sn:63034, mfg.2000 ● sn:62954, mfg.2000 (no Collet) ● sn:62453, mfg.1999
HAAS Model SL-20T CNC Turning Center with 10” 3-Jaw Chuck, Approx. 24” Centers, Tailstock, 10 Position Turret, 3” Spindle Bore, Chip Auger, HAAS CNC Control, sn:67479, mfg.2004
(2) HAAS Model SL-20 CNC Turning Centers with Collet Chuck, 24” Centers, Chucker, 10 Position Turret, 3” Spindle Bore, Chip Auger, HAAS CNC Control, sn:62863, mfg.2000 ● sn:62454, mfg.1999
(7) HAAS Model SL-10T CNC Turning Centers with Collet Chuck, Approx. 16” Centers, Tailstock, 12 Position Turret, 1.75” Spindle Bore, Chip Auger, HAAS CNC Control, sn:3074989, mfg.2006 ● sn:70485, mfg.2005 ● sn:70506, mfg.2005 ● sn:68235, mfg.2004 ● sn:65000, mfg.2002 ● sn:65058, mfg.2002 ● 65710, mfg.2001
HAAS Barfeed
MORI SEIKI Model SL-25 CNC Turning Center with Collet Chuck, Tool Presetter, Approx. 24” Centers, Tailstock, 12 Position Turret, 3” Spindle Bore, MF-T6 Control, sn:6745
MORI SEIKI Model SL-20 CNC Turning Center with Collet Chuck, Tool Presetter, Approx. 20” Centers, Tailstock, 10 Position Turret, 2” Spindle Bore, MF-T6 Control, sn:1858
MORI SEIKI Model SL-15 CNC Turning Center with Collet Chuck, Tool Presetter, Approx. 20” Centers, Tailstock, 12 Position Turret, 2” Spindle Bore, Chip Conveyor, MF-T6 Control, sn:1626
MORI SEIKI Model SL-15 CNC Turning Center with 6” 3-Jaw Chuck, Tool Presetter, Approx. 20” Centers, Tailstock, 12 Position Turret, 2” Spindle Bore, Chip Conveyor, MF-T6 Control, sn:1615
(6) HAAS SL-20T CNC TURNING CENTERS
6AVAIL.
2008
104479_HH Machine.indd 2 5/24/16 9:27 AM
AUCTION SALE DATE & TIME – TUESDAY, JUNE 21ST @ 10:00 A.M. CDT
3
(6) HAAS ST-20 TURNING CENTERS WITH COLLET CHUCK
20102011
6AVAIL.
2006
(14) HAAS SL-20T CNC TURNING CENTERS WITH COLLET CHUCK
14AVAIL.
2008
HAAS SL-20T CNC TURNING CENTER (2) HAAS SL-20 CNC TURNING CENTERS WITH COLLET CHUCK
2004 20002AVAIL.
104479_HH Machine.indd 3 5/24/16 9:27 AM
MACHINERY INSPECTION DATE & TIME – MONDAY, JUNE 20TH FROM 8:00 A.M. - 4:00 P.M. CDT
4
(7) HAAS ST-10T TURNING CENTERS
2006 2005
7AVAIL.
MORI SEIKI SL-25 CNC TURNING CENTER WITH COLLET CHUCK
HAAS VF-2 D CNC VERTICAL MACHINING CENTERDownload a lot book at www.asset-sales.com
2008
VERTICAL MACHINING CENTERHAAS Model VF-2 D CNC Vertical Machining Center with 36” x 14” Table, 30” X-Axis Travel, 16” Y-Axis, 20” Z-Axis, 20 HP, 40 Taper, 24 ATC, High Intensity Lighting, sn:1070260, mfg.2008
VERTICAL MILLING MACHINESBRIDGEPORT D.R.O. 2-Axis Vertical Milling Machine with Servo Power Feed to 9”x 42” Table, Variable Speeds, Series 1 2HP, sn:2J-75397-2
BRIDGEPORT J-Head Vertical Milling Machine
ENGINE LATHESATLAS Engine Lathe
PRATT & WHITNEY 14” x 36” Engine Lathe
HORIZONTAL BANDSAWSHEM Model H-90A-1 Horizontal Bandsaw with 12.75” x 12.75” Capacity, 1” x 12” x .035” Blade Size, 3 HP, 85 PSI, 0-24” Barfeed, Vice Clamping, sn:1097211, mfg.2011
HEM Model H-90 A-B/F Horizontal Bandsaw with 12” x 12” Capacity, 1” x 12” Blade Size, 10 HP, 85 PSI, 0-24” Barfeed, Adjustable Main Feed Vise, sn:684599, mfg.1999
SURFACE GRINDERBLANCHARD Model 11 Rotary Surface Grinder with 16” Magnetic Chuck, Coolant, Wheel Dresser, Control, Guarding, 10” -12” Vertical Travel, sn:6247
INSPECTIONMICRO VUE Optical Comparator, sn:22337
Gages ● Granite Surface Plates ● WILSON Hardness Tester
FORKLIFTSNISSAN Model 60 6,000lb Propane Forklift with Side Shift, All Terrain Tires
HYSTER 3,000lb Triple Mast Propane Forklift
AIR COMPRESSORS & DRYERSINGERSOLL RAND Model IRN40H Air Compressor with 40HP, 160 PSIG, mfg.2012
INGERSOLL RAND Model 2545 Air Compressor
INGERSOLL RAND Air Dryer
MISCELLANEOUS MACHINESDrill Presses ● ARBOR Press ● CADILLAC #60 Roll Stamper ● Chop Saw ● LA POINT Horizontal Broach ● TAFT PEIRCE Grinder ● NORTON OD Grinder ● LANDIS OD Grinder ● CINCINNATI Centerless Grinder ● SUNNEN Hone ● BRYANT Internal Grinder
MISCELLANEOUSBelt Grinders ● Pedestal Fans ● LINCOLN 200 MG Welder ● Ladders ● Tool Crib ● (9) Cantilever Racks ● (45) ROURA Gear Hoppers ● Parts Bin ● Parts Washer ● KURT Vice ● Extra Collets ● Chucks ● Tooling ● All Miscellaneous, Ancillary Tooling & Equipment
104479_HH Machine.indd 4 5/24/16 9:27 AM
AUCTION SALE DATE & TIME – TUESDAY, JUNE 21ST @ 10:00 A.M. CDT
5
BRIDGEPORT VERTICAL MILLING MACHINES
PRATT & WHITNEY 14" X 36" ENGINE LATHE
(2) HEM H-90A HORIZONTAL BANDSAWS
BLANCHARD ROTARY SURFACE GRINDER
2AVAIL.
2AVAIL.
NISSAN 6,000LB PROPANE FORKLIFT
INGERSOLL RAND AIR COMPRESSORS & AIR DRYERS
MICRO VUE OPTICAL COMPARATOR
2011
2012 2012
104479_HH Machine.indd 5 5/24/16 9:27 AM
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Missouri License #16-1
REAL ESTATE AVAILABLE FOR SALE @ 12:00 NOON
Directions From Tulsa International Airport:
Exit Airport for I-244 / I-44 E. Use the right 2 lanes to stay on I-44 E continue for 106 miles. Take exit 18B and merge onto I-49 N/Highway 71 N toward Carthage. Take exit 47 for Cedar Rd. Take E Outer Rd to Co. Ln. 137. Turn right onto Cedar Rd. Turn right at the 1st Cross Street onto E Outer Rd for continue for 1.1 miles. Continue onto Cimarron Rd. Turn left onto Co. Ln. 137. Plant will be at the end of the street.
HOTELSHILTON GARDEN INN JOPLIN - (417) 206-6700 2644 E. 32nd St - Joplin, MO 64804
CANDLEWOOD SUITES - (417) 623-9595 3512 S. Rangeline Rd - Joplin, MO 64804
ATTENDING THE AUCTION IN PERSON?What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying
via Company Check
PUBLIC AUCTIONHUGE HAAS AUCTION
H&H MACHINE40+ HAAS ST30, ST20T & SL10 CNC LATHES,
MILLING MACHINES & SUPPORT MACHINERYCARTHAGE, MO
TUESDAY, JUNE 21ST @ 10:00 A.M. CDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
• 23,740 Total sq ft - 17,940 Mfg sq ft & 5,800 sq ft Warehouse• 5 Acres• (5) Bay Doors - (3) 10' x 10' & (2) 10' x 14'• Large Area for Parking• Independent Water Well & Septic System• Separate Compressor Room• Building Wired for 240/3 Phase, 100 KV Incoming - Could be Converted to 440/3 Phase• Wired for High Speed Internet Service
FOR MORE INFORMATION PLEASE CALLASSET SALES, INC. (888) 800-4442
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third Party Logistics Firm
to Manage the Removal Process for Them.
104479_HH Machine.indd 6 5/24/16 9:27 AM
