®

PUBLIC AUCTION

“Let Our Experience Be Your #1 Asset” ™

AUCTION: Thursday, March 30, 2006, 10:30 A.M. 36 rue Fortin Nord, Adstock, Quebec

TEKNO 90 INC.

®

CORPORATE ASSETS INC.2 St. Clair Ave. W., Suite 1002Toronto, Ontario, Canada M4V 1L5Tel: (416) 962-9600Fax: (416) 962-9601Email: info@corpassets.comWeb: www.corpassets.com

In Conjunction With

EXECUTIVE OFFICES11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117

(410) 654-7500 • (800) 722-3334 • Fax (410) 654-5876email: info@michaelfox.com • www.michaelfox.com

(2) MAZAK FH 480 twin pallet CNC horizontal machining centers

1998

OKUMA CROWN 1420 CNC turning center 2001 OKUMA ES V3016 CNC vertical machining center

2000

CNC HORIZONTAL MACHINING CENTERS

(2) 1998 MAZAK FH 480 pallet type CNC horizontal machining Centers, with MAZATROL M PLUS control, 15.75" x 15.75" pallets, travels: x-22", y-22", z-20"; 15 to 12,000 RPM, ISO 40 taper, 30 position ATC, chip conveyor, s/n 138133, 138136

CNC TURNING CENTERS

2001 OKUMA CROWN 1420 CNC turning center with OKUMA OSP-U10L control, 14" max. turning dia., 49" max. turning length, 3" bar cap., speeds to 3,500 RPM, 15" dia. chuck, 12 station tool turret, 22 HP main drive, chip conveyor, s/n 01 2001 0351 (SEE COVER PHOTO)

1998 OKUMA CROWN 726E CNC turning center with OKUMA OSP-700L control, 10.63" max. turning dia., 20" max. turning length, 1.5" bar cap., 8" dia. chuck, 12 station tool turret, 12 HP main drive, chip conveyor, s/n 100407

(2) 1996 OKUMA L1420 CNC turning centers with OKUMA OSP control, 14" max. turning dia., 21" swing over bed, 26" max. turning length, 3" bar cap., 15" dia. chuck, 12 station tool turret, 22 HP main drive, up to 3,200 RPM, chip conveyor, s/n 08 03 01900, 1004 0702

1993 MAZAK QUICKTURN 18N CNC turning center with MAZATROL control, 17.3" nominal swing, 19.69" b/w centers, 2 1/4" bar cap., 10" dia. chuck, 10 station tool turret, chip conveyor, s/n 109710

1999 FEMCO HL 15B CNC turning center with MITSUBISHI control, 9.8" max. turning dia., 15" max. turning length, 2" bar cap., speeds to 4,800 RPM, 8" dia. chuck, 12 station tool turret, 10/15 HP main drive, s/n LJ9 0135

CNC VERTICAL MACHINING CENTERS

2000 OKUMA ES V3016 CNC vertical machining center with OKUMA OSP-U10M control, 37" x 20" table, travels: x-30", y-16", z-20.5", 50 to 8,000 RPM, 10/7.5 HP main drive, CAT 40 taper, 20 position ATC, s/n 5010 (SEE COVER PHOTO)

1995 OKUMA CADET V4020 CNC vertical machining center with OKUMA OSP-5020 control, 47" x 20" table, travels: x-40", y-20", z-20", 80 to 8,000 RPM, CAT 40 taper, 20 position ATC, s/n 0805 1025

1995 OKUMA CADET 1420 CNC vertical machining center with OKUMA OSP-700L control, 47" x 20" table, travels: x-40", y-20", z-20", CAT 40 taper, 20 position ATC, s/n 1004 0703

1994 OKUMA CADET MATE CNC vertical machining center with OKUMA OSP-700 M control, 47" x 20" table, travels: x-40", y-20", z-20", CAT 40 taper, 20 position ATC, s/n 0560

1994 COMET MIGHTY CNC 1730 CNC vertical machining center with FANUC 0M CNC control, 48" x 18" table, s/n 890764

TSUDAKOMA 10" 4th & 5th axis integrated rotary table

MAZAK QUICKTURN 18N CNC turning center 10" TSUDAKOMA 4th & 5th axis integrated rotary table

OKUMA CADET 1420 CNC vertical machining center

1995

OKUMA CADETMATE V4020 CNC vertical machining center

1995

2 AVAILABLE

FEMCO HL15B CNC turning center

1999

OKUMA L1420 CNC turning center

1996

2 AVAILABLE

2

MAZAK FH 480 twin pallet CNC horizontal boring mill

2 AVAILABLEView of MAZAK spindle & MAZATROL M plus control

This brochure is only a partial listingVISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS

www.corpassets.com

MACHINE SHOP EQUIPMENT

1997 MASINIMORTEXPORT SNA800/3000 gap bed engine lathe with 36" swing over bed, 52" swing in gap, 124" between centers, 4 1/4" bore, 20–1,250 RPM, inch/metric threading, DRO, s/n 7934759

MORI SEIKI 20" x 60" engine lathe with 2 1/8" bore, 28–1,350 RPM, inch/metric threading, s/n 1197

POLAMCO TUE40 engine lathe with 17" swing, 58" centers, s/n 9887716

HAVLIK Z3035B 4' radial arm drill with 11" dia. column, #4 MT, box table, s/n 00210

TOS KURIM FM 50 ram type turret mill

PEIPING 127 IAN RD drill grinder

DAVIS 15 keyseater, s/n 15-21

CANOX MIGMATIC 250 mig welder with wire feed cables

YALE GLP050TGNUAE084 LPG forklift truck with 5,000 lb. cap., 189" vertical lift, cushion tires, s/n A875BO3882W

CLARK LPG forklift with 5,500 lb. cap., 154" vertical reach, cushion tires, s/n 50-46-1152

1994 ATLAS COPCO GA22 rotary air compressor with 30 HP drive, s/n AII215207

ATLAS COPCO GA11 rotary screw air compressor with 15 HP cap., s/n ARP777251

ALSO: tool cabinets, hand tools, perishable tooling, CAT 40 tool holders, carbide tools bits, power tools, hydraulic jacks, strapping caddies, ladders, tote bins, chop saw, clamping hardware, pedestal grinders, 12" disk sander, (5) floor type drill presses, (3) electric hoists up to 1 ton, hydraulic pallet truck, dollies, machine vises, plate clamps, oxy acetylene torches, adjustable pallet racks, bar, tube, angle stock, etc.

PEIPING drill grinder ATLAS COPCO GA22 30 HP rotary screw air compressor

CANOX MIGMATIC 250 mig welder 4' HAVLIK radial arm drill

1994

View of DAVIS keyseater & drills, etc. View of YALE & CLARK 5,500 lb. LPG forklifts

View of steel inventory MORI SEIKI 20" x 60" engine lathe Sample view of CAT 40 taper tooling

MASINIMORTEXPORT 36" x 124" gap bed engine lathe

1997

3

AUCTION CONDUCTED BY CORPORATE ASSETS INC.For further information contact us at:

2 St. Clair Ave. W., Suite 1002,Toronto, OntarioCanada M4V 1L5

Tel: (416) 962-9600 • Fax: (416) 962-9601Email: info@corpassets.comWeb: www.corpassets.com

Toronto–Chicago

PROXY BIDDINGIf you are unable to attend this auction, we would be pleased to act as your proxy. Please contact our office at (416) 962-9600 or visit our website for a proxy bid form, terms and additional information.

APPRAISAL SERVICESWhat’s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certified experts at Corporate Assets Inc.

• We will appraise one machine or your complete plant

• Going concern, fair market, or liquidation values

We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment. Call us in complete confidence today with your requirements.Toronto: (416) 962-9600Fax: (416) 962-9601email: appraisals@corpassets.comToronto–Chicago

MEMBER IN GOOD STANDING:

AUCTIONEER

S

ASSOCIATION

OF ALBER

TA

MEMBER

NAT

IONAL ASSOCIATIO

N

BA

N

KRUPTCY TRUSTEE

S

INSPECTIONWednesday, March 29th, 2006, 9:00 A.M. to 5:00 P.M.

DIRECTIONSFrom Quebec City’s JEAN LESAGE INTERNATIONAL AIRPORT: Follow Highway 73 South (Sud) over Pierre LaPorte Bridge. Exit Highway 20 West (Ouest) Montreal to Highway 269 South (Sud). Stay on Highway 269 through various towns & turns toward Thetford Mines. Proceed through to Robertsonville and stay on Highway 269 into Adstock. Upon entering Adstock, turn left on rue Fortin Nord. Plant is located on the left hand side, approximately 300 meters down. Look for auction signs. Please allow approximately 90 minutes traveling time from the airport.

ACCOMMODATIONS & CAR RENTALSPlease visit our website for details at www.corpassets.com

PAYMENTThe purchase price must be paid in full before or immediately after the conclusion of the auction.

All payments shall be by way of wire transfer, certified check, bank draft, or a company check accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: “NAME OF BANK hereby guarantees irrevocable payment of checks payable to Corporate Assets Inc. up to AMOUNT IN WORDS & CURRENCY for purchases made by our client NAME OF CLIENT. This letter is valid for purchases made at the auction of NAME OF AUCTION being held in CITY, STATE/PROVINCE on DATE.”

Payments may be made in advance of the auction via wire transfer and any balance in excess of the balance owing will be refunded after the auction.

The auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

A Buyer’s Premium will apply at this sale.

REMOVALSmall items by Friday, March 31st, 2006, 5:00 P.M.; remainder of items by Thursday, April 6th, 2006, 3:00 P.M. NO EXCEPTIONS!

TERMSSee web

UPCOMING AUCTIONSMarch 21 – The Auction Centre Brampton (Toronto), Ontario Machine ToolsMarch 22 – Sommerville Design & Manufacturing Inc. Pickering, Ontario Type of Sale?April 11 – Gearco A Division of Volvo Motor Graders Ltd. Goderich, Ontario Automotive???Late May/June – Les Industries Davie Inc. Quebec City, Quebec Ship Building Facility

This brochure is only a partial listingVISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS

www.corpassets.com

INSPECTION EQUIPMENT

ALSO: inspection tooling, micrometers, verniers, gauges, calipers, MITUTOYO precision reference specimen,

OFFICE EQUIPMENT

ALSO: office furniture & business machines

PRINTED IN U.S.A. IP-6204821© 2006 CORPORATE ASSETS INC., ALL RIGHTS RESERVED

View of tooling

Please visit our website at

www.corpassets.com for a Pre-Registration

Form