1/18

Product Parts

1 - Main Assembly with attached Top Rail*2 - Clear Rail Insert (x2)3 - Bottom Rail4 - Graphic

Pulldown Hanging Banner

Display Set-Up

Step 1 Start on a flat clean surface and remove one endcap from the Top Rail (1) then remove the Clear Rail Insert (2).

Step 2 Open along edge to create enough space to slide Graphic (4) into. Press down on Clear Rail Insert (2) to hold Graphic (4) in place.

1

2

34

*Hardware to hang banner is not included.

Step 3 Slide Clear Plastic Insert (2) with Graphic (4) attached back into Top Rail (1). Reinsert endcap. Step 4

Remove endcap and Clear Rail Insert (2) from Bottom Rail (3). Insert Graphic into Bottom Rail (3) and reinsert according to step 3.

Storage and Care

Store in a cool dry location. To clean, wipe with damp cloth.

Step 5 While holding onto Bottom Rail (3) gently pull down to desired position. Step 6

To retract graphic back to Main Assem-bly (2) push banner rail upward until it contacts Main Assembly (1).

*NOTE: A pole can be helpful to pull down & retract the graphic. (Pole Not Included)