purEco LED Info Flyer Industrie EN

2

1. Reducing electricity costs (by up to 80%)2. Improving working safety3. Innovative and high-quality components4. Reducing maintenance / long service life5. Resistant and lasting technology6. purEco LED solutions - innovative LED lights

3

Reducing costs thanks to purEco LED technology

Today’s companies are in a difficult competi-tive environment. There is a need to optimise, find new ways and save costs, and electricity costs are a significant proportion of this. Ef-ficient lighting is a relevant factor, particularly in shift work, in halls with no natural lighting and for night work. This affects the produc-tivity of staff as well as their safety. On the other hand, cost is important too (light fit-tings, maintenance and electricity).

The demands of various interest groups can be met thanks to LED technology. Acquisi-tion costs pay for themselves within a short period due to the large savings on electricity. Maintenance costs are also drastically redu-ced via new technology. We will be pleased to calculate individually for projects so that you can make a 1-to-1 comparison with traditio-nal lighting.

[email protected]

Besides high quality, a fast, competent and fair customer service is very important.

For each project we calculate individual light simulation and costs (ROI). We can thereby ensure that the actual lighting required can be deployed, and we can calculate when the investment will start to pay for itself. In af-ter-sales, we support you with regard to any questions, modifications and extensions.

According to our terms of guarantee, our ex-perts will perform the necessary control acti-vities as soon as possible and free of charge.

See for yourself:

We will be pleased to advise you and provide you

with demo products.

[email protected]

4

in cases such as these. Another advantage is CO2 reduction, which may also total 80%. Furthermore, you can improve your energy balance and create a sustainable and inno-vative image.

2. Improving working safety

As LED lighting emits neither infrared rays (heat) nor UV rays (which are in traditional lighting), the lighting does not cause any physical harm. The luminosity and effect – almost emulating day-light – achieved by the high color rendering index (CRI), increase working safety and the well being of employees. There are also clear improvements to be seen compared to traditional yellow ligh-ting. The color temperature (Kelvin) can be se-lected as required.

See for yourself, with convincing argu-ments for switching the technology:

1. Reducing electricity costs (by up to 80%)

A light-emitting diode (LED) is a semiconduc-tor light source. In the LED chip, the energy from the electric current is transformed into light energy through relatively low heat incre-ase. Thanks to LED technology, energy sa-vings of up to 80% can be achieved, based on lower power consumption. This is due to the almost loss-free, direct conversion of the electricity into light energy. Changing to LED lights is particularly economical for compa-nies conducting shift work, or with working days of more than 10 hours per day. The amortization period may be under 24 months

4

The advantages of purEco LED products

5

3. Innovative and high-quality components

At purEco LED AG, we deploy the latest tech-nology and high quality components. LED chips and drivers come from the world’s lea-ding manufacturers in LED technology (Phi-lips, Osram and Cree). Thanks to a variety of optics, the optimum lighting can be found for every application. LED chips are also excel-lently protected and are shockproof and vib-ration-proof. Besides this, there is no danger of glass breakage. In contrast to conventional lights, our products do not contain any toxic heavy metals, such as mercury or lead.

4. Reducing maintenance / long service life

Thanks to their long service life (50,000 hours), maintenance is considerably redu-ced. LEDs have many times the service life compared to conventional lighting. There are therefore no future costs for replacing lights and ballasts, thereby reducing the associated work. As the lighting is not classed as spe-cial waste, this leads to lower disposal costs. Ballasts cannot fail with LED tubes as they are operated directly with 230V.

5. Resistant and lasting technology

The purEco LED industrial spotlight is an in-teresting alternative to conventional ceiling spotlights. Existing cabling can be retained. Simple installation profiles enable them to be changed quickly without holding up compa-ny activities. The LED technology generates remarkable light values with low energy con-sumption and minimal heat development and therefore makes a considerable contribution to increasing efficiency, quality and precision. Thanks to the robust casing, the LED chips are resistant to contact, shock and moisture. All our industrial lights have IP65 protection rating characteristics.

6. purEco LED solutions - innovative LED lights

Our industrial lights and T8 tubes are ideal for different areas of application inside and outside buildings, such as warehouses, storerooms, factories, supermarkets, exhibi-tion halls, filling stations, car parks, etc.Thanks to the modular design of the LED highbays, between 2 and 6 LED modules can be used. Optimum lighting can therefore be guaranteed for the lowest possible electricity consumption in every application.

Contact us for a product presentation and consultation with no obligation.

5

6

pur

Eco

LE

D H

ighb

ay P

EH

6 S

erie

sp

urE

co L

ED

Tub

es

High Efficiency for High Bay Lighting

Thanks to its highly efficient chips from the manufacturers, Cree, Osram

or Philips, we have achieved a efficiency of more than 85 lm/w.

Only Philips drivers with a lifetime of over 50,000 hours are installed. It

has a low weight and the slim casing is made to be robust and solid.

A shock-resistant version is available optionally (crane assembly). The

three installation profiles enable usage in all areas of application.

+ innovative and reliable LED chips

+ high-quality Philips driver

+ 50,000 hours maintenance-free / 5-year guarantee

+ installation fixture for any area of use

pur

Eco

LE

D H

ighb

ay P

EF6

Ser

ies

Floodlighting on a New Level

Just like the PEH6, this luminaire is of very good technical characteris-

tics. Whether indoor or outdoor, purEco LED floodlights are of great use

in different environments. The modular design and the three different

beam angles (light distribution curve) for all purEco LED floodlights ena-

ble optimum illumination for every requirement. The heat management

ensures a long service life thanks to high-quality aluminum cooling ele-

ments.

+ very good thermal management

+ different beam angles (light distribution curve)

+ robust, sophisticated and simple

+ immediate and constant light

Simple and efficient

No conventional ballast / electronic ballast required. Only LED tubes

is required, which can be operated with 230V. The service life of

more than 40,000 hours make this product one of the simplest and

most efficient solutions for rapid electricity reduction. Existing lights

can be easily replaced. The LED tubes, which can also be supplied

including casing, make this the right choice in any area of applica-

tion and for any ambient temperature.

+ no conventional ballast / electronic ballast required

+ no mercury

+ no UV and infrared rays

+ fast and simple replacement of existing lights

+ immediate energy and CO2 reduction

+ short switching cycles possible / immediate light

7

Product Code PEH6315 PEH6325 PEH6340 PEH6345 PEH6360

Input Voltage AC220 - 240V, 50Hz

Power Factor 0.98

LED Module 2 3 4 4 6

Luminaire Lumen 5100-5400 lm 9800-10400lm 13000-13800Im 14500-15500Im 22000-24000lm

Luminaire Power 65 w 120 w 160 w 180 w 260 w

Luminaire Efficiency > 85 lm/w > 85 lm/w > 85 lm/w > 85 lm/w > 85 lm/w

Colour Temperature 3000K - 6000K

Colour Rendering Index Ra > 65 (higher upon request)

Operation Condition -40° - +50°, 10% - 90%RH

LED Life Span > 50‘000 hours

Break Protection > 4KV

Shell Material / IP Rating Aluminium / IP65

Product Code PEF6315 PEF6325 PEF6340 PEF6345 PEF6360

Input Voltage AC220 - 240V, 50Hz

Power Factor 0.98

LED Module 2 3 4 4 6

Luminaire Lumen 5100-5400 lm 9800-10400lm 13000-13800Im 14500-15500Im 22000-24000lm

Luminaire Power 65 w 120 w 160 w 180 w 260 w

Luminaire Efficiency > 85 lm/w > 85 lm/w > 85 lm/w > 85 lm/w > 85 lm/w

Colour Temperature 3000K - 6000K

Colour Rendering Index Ra > 65 (higher upon request)

Operation Condition -40° - +50°, 10% - 90%RH

LED Life Span > 50‘000 hours

Break Protection > 4KV

Shell Material / IP Rating Aluminium / IP65

Product number Length Power LEDComparison

conv.Lumen lm

Efficiency lm/w

Colour Temp. CRI

95

PE3T8CLG-20-840 1200mm 20W 36W 1900

4000-4500K

>80

PE3T8CLG-25-840 1500mm 25W 58W 2400

PE3T8CLG-30-840 1500mm 30W 58W 2800

PE3T8CLG-20-860 1200mm 20W 36W 19006000-6500K

PE3T8CLG-30-860 1500mm 30W 58W 2800

8

Polar Curve

purEco LED Highbay PEH6 and LED Floodlight PEF6 Series

purEco LED tubes

0°

+/-180°

90°-90°

Polar Curve – narrow – 25°

0

130

140

150160

170 180 170160

150

140

130

120

110

100

90

80

70

60

50

40

30

201010

2030

40

50

60

70

80

90

100

110

10

6000

8000

1e+004

1.2e+004

2000

4000

1.4e+004

0

0

04

04

0

0

0

0

0

0

0

130

140

150160

170 180 170160

150

140

130

120

110

100

90

80

70

60

50

40

30

201010

2030

40

50

60

70

80

90

100

110

10

150

200

250

300

350

50

100

150

200

250

300

50

100

Polar Curve – middle – 60°

0

130

140

150160

170 180 170160

150

140

130

120

110

100

90

80

70

60

50

40

30

201010

2030

40

50

60

70

80

90

100

110

10

150

200

250

300

350

50

100

150

200

50

100

Polar Curve – wide – 90°

0

130

140

150160

170 180 170160

150

140

130

120

110

100

90

80

70

60

50

40

30

201010

2030

40

50

60

70

80

90

100

110

10

150

200

250

300

350

50

100

50

Polar Curve – high-rack

9

PEH6360 - Light Distribution

The light distribution of the PEH6360 LED highbay

with a middle beam angle achieves 820lx on the

workspace at a mounting height of 5m with a dia-

meter of about 4m. Thus, this model is also suitable

for installation heights of 15 - 20m. Thanks to the

different beam angles, the perfect solution for any

lighting application can be found.

3.281ft1m

1912,2891fc20578,31114lx

2.581ft78.66cm

6.562ft2m

477.9,722.6fc5144,7778lx

5.161ft157.31cm

9.843ft3m

212.4,321.2fc2286,3457lx

7.742ft235.97cm

13.12ft4m

119.5,180.7fc1286,1945lx

10.32ft314.62cm

16.4ft5m

Height

76.47,115.6fc823.1,12451lx

Eavg,Emax Angle:42.94deg

12.9ft393.28cm

Diameter

Note:The Curves indicate the illuminated area and the averageillumination when the luminaire is at different distance.

Halle Variante WideZusammenfassung, Halle Variante WideErgebnisübersicht, Nutzebene 1

purEco LED AG - Industriestrasse 23 - CH-6055 Alpnach Dorf - www.pureco-led.com

Relux1

0m 20m

150lx 200lx 300lx 500lx 750lx

40m 60m 80m 100m 120m 140m

AllgemeinVerwendeter Rechenalgorithmus Mittlerer IndirektanteilHöhe der Bewertungsfläche 0.75 m

m 00.8enebenethcueL ehöH08.0rotkafsgnutraW

Gesamtlichtstrom aller Lampen 2495500 lmW 08982gnutsieltmaseG

Gesamtleistung pro Fläche (6525.00 m²) 4.44 W/m² (1.40 W/m²/100lx)

BeleuchtungsstärkenMittlere Beleuchtungsstärke Em 317 lxMinimale Beleuchtungsstärke Emin 147 lxMaximale Beleuchtungsstärke Emax 354 lxGleichmäßigkeit g1 Emin/Em 1:2.16 (0.46)Gleichmäßigkeit g2 Emin/Emax 1:2.41 (0.42)

Typ Anz. Fabrikat

purEco LED AG4 161 Bestell Nr. :

Leuchtenname : PEH6345-Wide AngleBestückung : 1 x / 15500 lm

PEH6 – LED Highbay in Practice

In a production facility, with a mounting height of 8m, a very homogeneous ilumination of 300lx on the workspace was required. purEco LED AG achieved this with 161 units of PEH6345 LED highbays with a wide beam angle and 180 watt lighting power. The illumination was very uniform with an average illuminance of 317lx. The total consumption of the 6‘525m2 production plant is now at 28.9 kWh. The DIN 18599 lighting standard is designed for surface-related energy consumption. In this example, the engery con-

sumption is only 10 kWh per m2, which is well below the 35 kWh per m2 allowed by Energy Sa-ving Ordinance (EnEV 2003). Thus, the energy efficiency of this building fulfills all future energy standards. Thanks to purEco LED’s lighting so-lution, the customer achieved significant energy savings and 50,000 hours of maintenance-free LED illumination. Moreover, due to the innova-tive LED technology, the working environment and employee motivation could be improved.

10

Typ LED HQL

Model PEH6345 HQL 400W

Power consumption per luminaire in Watt 180 400

Number of luminaire 161 161

Lifetime (h) 50‘000 10‘000

Total power consumption in kWh 28.98 64.4

*savingkWh/Year

*savingUSD/Year

**savingCO2 /year

Power consumption in 24h / 5 days / 240 days a year in kWh

166‘925 370‘944 204‘019 USD 30‘602.85 28‘970 kg


111‘283 247‘296 136‘013 USD 20‘401.95 19‘314 kg


69‘552 154‘560 85‘008 USD 12‘751.20 12‘071 kg


55‘642123‘648 68‘006 USD 10‘200.90 9‘657 kg

Payback PeriodHQL vs. LED

*Power consumption: electricity prices per kWh = USD 0.15 **Source: Swiss Federal Office for the Environment, BAFU

10

11

Typ LED T8 tubes

Conv. T8 tubes

Model PE3T8CLG -25-840

58 w tubes

Power consumption per luminaire in W, +10% electronic ballast

25 63.8

Number of fittings 500 500

Socket G13 G13

Lifetime (h) 50‘000 15‘000

Total power consumption in kWh 12.5 31.9

*savingkWh/year

*savingUSD/year

**savingCO2 /year


72‘000 167‘000 95‘000 USD 14‘250.00 13‘490 kg

Power consumption in 16h / 5 days / 240 days a year in KWh

48‘000 111‘500 63‘500 USD 9‘525.00 9‘514 kg


24‘000 55‘500 31‘500 USD 4‘725.00 4‘473 kg

Payback PeriodConventional vs. LED tubes

*Power consumption: electricity prices per kWh = USD 0.15 **Source: Swiss Federal Office for the Environment, BAFU

11

Industriestrasse 23 CH-6055 Alpnach DorfSwitzerlandT +41 41 508 01 00T +41 41 508 01 00

[email protected]

Distributed by / local address:

Documents

purEco LED Info Flyer Industrie EN