15 16 Clean the dashboard/ windshield and peel the protecve film from the sucon cup boom. Surface PUSH No Air Gap Suction Cup STEP 1 Push the sucon cup harder against the dashboard/ windshield surface ( flat surface prefered) and then pull the locker twice to the boom to ensure the stability STEP 2 Boom tray Locker Clean the dashboard and mount the sucon cup on the dashboard. Please push the sucon cup harder against the dashboard and push the locker to the boom Insert the adjustable claw into your car’s air vent, adjust the car mount to the opmal viewing angle make sure the claw is inserted securely in posion. Adjust the Vent Clip Horizontally/Vercally at a proper angle to match the air vents, having the holder touch the vent boom surface (not inserng it into the vent) so it can form a triangle posion, then press and hold the Clip to insert into your car's air vents making the claw more stable to hold your phone. Horizontally air vents type Vent Clip Holder Having the holder touch the vent boom surface (not inserng it into the vent) Vercally air vents type Boom tray If your phone wears a case, please adjust the boom tray to the appropriate area for wireless charging , otherwise it may cause the charging to stop or repeat the power-off charging phenomenon. During use, please make sure that the charger will not be powered off (like the adapter loose) , otherwise the automac arm will open automacally, causing the phone to fall.

PUSH · 2019. 10. 23. · PUSH No Air Gap Suction Cup STEP 1 Push the suction cup harder against the dashboard/ windshield surface ( ﬂat surface prefered) and then pull the locker

Download PDF Report

Upload
others
View
5
Download
0

Embed Size (px)

Citation preview

15 16

Clean the dashboard/ windshield and peel the protective film from the suction cup bottom.

SurfacePUSH

No Air GapSuction Cup

STEP 1

Push the suction cup harder against the dashboard/ windshield surface ( flat surface prefered) and then pull the locker twice to the bottom to ensure the stability

STEP 2

Bottom tray

Locker

Clean the dashboard and mount the suction cup on the dashboard. Please push the suction cup harder against the dashboard and push the locker to the bottom

Insert the adjustable claw into your car’s air vent, adjust the car mount to the optimal viewing angle make sure the claw is inserted securely in position.

Adjust the Vent Clip Horizontally/Vertically at a proper angle to match the air vents, having the holder touch the vent bottom surface (not inserting it into the vent) so it can form a triangle position, then press and hold the Clip to insert into your car's air vents making the claw more stable to hold your phone.

Horizontally air vents type

Vent Clip

Holder

Having the holder touch the vent bottom surface (not inserting it into the vent)

Vertically air vents type

Bottom tray

If your phone wears a case, please adjust the bottom tray to the appropriate area for wireless charging , otherwise it may cause the charging to stop or repeat the power-off charging phenomenon.

During use, please make sure that the charger will not be powered off (like the adapter loose) , otherwise the automatic arm will open automatically, causing the phone to fall.