Qualkitdo Rptgenext Qualificationreport SDD Math

Embed Size (px)

Citation preview

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    1/46

    SDD_math.slx

    Design Description

    The MathWorks, Inc.

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    2/46

    SDD_math.slx

    2

    SDD_math.slx: Design DescriptionThe MathWorks, Inc.

    Publication date 13-Aug-2015 03:59:10

    Copyright© 2015

    For Internal Distribution Only

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    3/46

    iii

    Table of Contents

    1. Model Version ............................................................. ................................................... 1

    2. Root System ................................................................................... ................................ 2

    Description ................................................. ........................................................ ........ 2

    Blocks ....................................................................................................................... 3

    Parameters .................................................................. ....................................... 3Block Execution Order ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... .... 24

    3. System Design Variables ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 26

    Design Variable Summary ..... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 26

    4. System Model Configuration ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... .... 27

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    4/46

    iv

    List of Figures

    2.1. SDD_math ................................................... ........................................................ ........ 2

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    5/46

    v

    List of Tables

    2.1. "Abs" Parameters .......................................................................................................... 3

    2.2. "Add" Parameters .......................................................................................................... 3

    2.3. "Assignment" Parameters ................................................................................................ 4

    2.4. "Bias" Parameters .......................................................................................................... 4

    2.5. "c2ma" Parameters ........................................................................................................ 42.6. "c2ri" Parameters ................................ .......................................................................... 5

    2.7. "concat" Parameters ....................................................................................................... 5

    2.8. "Constant" Parameters .................................................................................................... 5

    2.9. "Constant1" Parameters .................................................................................................. 5

    2.10. "Dot Product" Parameters .... ...... ..... ...... ........................................................................ 6

    2.11. "elprod" Parameters ..................................................................................................... 6

    2.12. "Gain" Parameters ....................................................................................................... 7

    2.13. "ma2c" Parameters ...................................................................................................... 7

    2.14. "Math Function" Parameters .......................................................................................... 8

    2.15. "Max" Parameters ........................................................................................................ 8

    2.16. "Min" Parameters ........................................................................................................ 9

    2.17. "Permute Dimensions" Parameters .................................................................................. 9

    2.18. "Polynomial" Parameters ....... ..... ...... ..... .................................................... .................. 10

    2.19. "Product" Parameters .................................................................................................. 10

    2.20. "Reshape" Parameters ................................................................................................. 10

    2.21. "ri2c" Parameters ....................................................................................................... 11

    2.22. "Round" Parameters ................................................................................................... 11

    2.23. "Sign" Parameters ...................................................................................................... 11

    2.24. "Sine Wave" Parameters ....... ...... ...... ..... ..................................................................... 11

    2.25. "Sine Wave1" Parameters ... ...... ...... ..... ..... ................................................................... 12

    2.26. "Sine Wave10" Parameters ... ..... ...... ..... ....................................................................... 12

    2.27. "Sine Wave11" Parameters ... ..... ...... ..... ....................................................................... 13

    2.28. "Sine Wave12" Parameters ... ..... ...... ..... ....................................................................... 13

    2.29. "Sine Wave13" Parameters ... ..... ...... ..... ....................................................................... 14

    2.30. "Sine Wave14" Parameters ... ..... ...... ..... ....................................................................... 142.31. "Sine Wave15" Parameters .......................................................................................... 14

    2.32. "Sine Wave16" Parameters .......................................................................................... 15

    2.33. "Sine Wave17" Parameters .......................................................................................... 15

    2.34. "Sine Wave18" Parameters .......................................................................................... 16

    2.35. "Sine Wave19" Parameters .......................................................................................... 16

    2.36. "Sine Wave2" Parameters ............................................................................................ 17

    2.37. "Sine Wave20" Parameters .......................................................................................... 17

    2.38. "Sine Wave21" Parameters .......................................................................................... 18

    2.39. "Sine Wave22" Parameters .......................................................................................... 18

    2.40. "Sine Wave23" Parameters .......................................................................................... 19

    2.41. "Sine Wave24" Parameters .......................................................................................... 19

    2.42. "Sine Wave3" Parameters .... ..... ...... ..... ...... .................................................................. 19

    2.43. "Sine Wave4" Parameters ............................................................................................ 202.44. "Sine Wave5" Parameters ............................................................................................ 20

    2.45. "Sine Wave6" Parameters ............................................................................................ 21

    2.46. "Sine Wave7" Parameters .. ...... ..... ...... ......................................................................... 21

    2.47. "Sine Wave8" Parameters ............................................................................................ 22

    2.48. "Sine Wave9" Parameters ............................................................................................ 22

    2.49. "Sumel" Parameters .................................................................................................... 23

    2.50. "timemath" Parameters ............................................................................................... 23

    2.51. "Trig" Parameters ...................................................................................................... 24

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    6/46

    SDD_math.slx

    vi

    2.52. "Unary Minus" Parameters ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... . 24

    3.1. Functions used in Design Variable Expressions ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 26

    4.1. SDD_math Configuration Set ......................................................................................... 27

    4.2. SDD_math Configuration Set.Components(1) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 27

    4.3. SDD_math Configuration Set.Components(2) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 28

    4.4. SDD_math Configuration Set.Components(3) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 29

    4.5. SDD_math Configuration Set.Components(4) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 304.6. SDD_math Configuration Set.Components(5) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 33

    4.7. SDD_math Configuration Set.Components(6) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 34

    4.8. SDD_math Configuration Set.Components(7) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 34

    4.9. SDD_math Configuration Set.Components(8) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 35

    4.10. SDD_math Configuration Set.Components(9) .................................................................. 37

    4.11. SDD_math Configuration Set.Components(8).Components(1) .... ... ... ... ... ... ... ... ... ... ... ... ... ... . 38

    4.12. SDD_math Configuration Set.Components(8).Components(2) .... ... ... ... ... ... ... ... ... ... ... ... ... ... . 39

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    7/46

    1

    Chapter 1. Model VersionVersion: 1.60

    Last modified: Wed Mar 13 06:39:08 2013

    Checksum: 957980015 776735266 4205367895 51287990

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    8/46

    2

    Chapter 2. Root System

    Table of ContentsDescription ............................................... ........................................................ .................. 2

    Blocks ............................................................................................................................... 3

    Parameters ................................................................ ................................................. 3

    Block Execution Order ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... 24

    Figure 2.1. SDD_math

    Copyright 2009-2011 The MathWorks, Inc.

    This model should contain all blocks in the Math Operations library that aren't actually masked subsystems.

    u*Ts

    timemath

    ReIm

    ri2c

    |u |

    u

    ma2c

    elprod

    [1x2]2

    concat

    [1x2]

    Re(u)

    c2ri

    u

    c2ma

    -u

    Unary Minus

    cos

    Trig

    Sumel

    Squeeze

    Squeeze

    [1x1x2]

    [2x1]

    Sine Wave9

    Sine Wave8

    Sine Wave7

    Sine Wave6

    Sine Wave5

    Sine Wave4

    Sine Wave3

    Sine Wave24

    Sine Wave23

    Sine Wave22

    Sine Wave21

    Sine Wave20

    Sine Wave2

    Sine Wave19

    Sine Wave18

    Sine Wave17

    Sine Wave16

    Sine Wave15

    Sine Wave14

    Sine Wave13

    Sine Wave12

    Sine Wave11

    Sine Wave10

    Sine Wave1

    Sine Wave

    Sign

    ceil

    Round

    Reshape

    Reshape

    [1x2]

    [1x1x2]

    Product

    P(u)O(P) = 1

    Polynomial

    P:[2,1]

    Permute

    Dimensions

    [1x2]

    [2x1]

    Simulink Report Gen erator (SDD Report) Tes t ModelSDD_math

    min

    Min

    max

    Max

    e u

    Math Function

    2

    Gain

    Dot Product

    2

    Constant1

    0

    Constantu+1

    Bias

    Y0

    UYA

    Assignment

    Add

    |u |

    Abs

    Description

    Simulink Report Generator (SDD Report) Test Model

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    9/46

    Root System

    3

    Blocks

    Parameters

    "Abs" (Abs)

    Table 2.1. "Abs" Parameters

    Parameter Value

    Enable zero-crossing det-

    ection

    on

    Sample time (-1 for inhe-

    rited)

    -1

    Output minimum []

    Output maximum []

    Output data type Inherit: Same as input

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    "Add" (Sum)

    Table 2.2. "Add" Parameters

    Parameter Value

    Icon shape rectangular

    List of signs ++

    Sum over All dimensions

    Dimension 1

    Require all inputs to have

    the same data type

    off

    Accumulator data type Inherit: Inherit via internal rule

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock data type settings

    against changes by the fi-

    xed-point tools

    off

    Integer rounding mode Floor

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    10/46

    Root System

    4

    Parameter Value

    Saturate on integer overf-

    low

    off

    Sample time (-1 for inhe-

    rited)

    -1

    "Assignment" (Assignment)

    Table 2.3. "Assignment" Parameters

    Parameter Value

    Number of output dimen-

    sions

    1

    Index mode One-based

    Initialize output (Y) Initialize using input port

    Index Option Index vector (dialog)Index 1

    Output Size 1

    Action if any output ele-

    ment is not assigned

    None

    Sample time (-1 for inhe-

    rited)

    -1

    Index Option Index vector (dialog)

    Index 1

    Output Size 1

    "Bias" (Bias)

    Table 2.4. "Bias" Parameters

    Parameter Value

    Bias 1

    Saturate on integer overf-

    low

    off

    "c2ma" (ComplexToMagnitudeAngle)

    Table 2.5. "c2ma" Parameters

    Parameter Value

    Output Angle

    Sample time (-1 for inhe-

    rited)

    -1

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    11/46

    Root System

    5

    "c2ri" (ComplexToRealImag)

    Table 2.6. "c2ri" Parameters

    Parameter ValueOutput Real

    Sample time (-1 for inhe-

    rited)

    -1

    "concat" (Concatenate)

    Table 2.7. "concat" Parameters

    Parameter Value

    Number of inputs 2

    Mode Multidimensional array

    Concatenate dimension 2

    "Constant" (Constant)

    Table 2.8. "Constant" Parameters

    Parameter Value

    Constant value 0

    Interpret vector paramet-

    ers as 1-D

    on

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit from 'Constant value'

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Sample time inf

    Frame period inf

    "Constant1" (Constant)

    Table 2.9. "Constant1" Parameters

    Parameter Value

    Constant value 2

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    12/46

    Root System

    6

    Parameter Value

    Interpret vector paramet-

    ers as 1-D

    on

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit from 'Constant value'

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Sample time inf

    Frame period inf

    "Dot Product" (DotProduct)

    Table 2.10. "Dot Product" Parameters

    Parameter Value

    Require all inputs to have

    the same data type

    on

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    Sample time (-1 for inhe-

    rited)

    -1

    "elprod" (Product)

    Table 2.11. "elprod" Parameters

    Parameter Value

    Number of inputs *

    Multiplication Element-wise(.*)

    Multiply over All dimensions

    Dimension 1

    Require all inputs to have

    the same data type

    off

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    13/46

    Root System

    7

    Parameter Value

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    Sample time (-1 for inhe-

    rited)

    -1

    "Gain" (Gain)

    Table 2.12. "Gain" Parameters

    Parameter Value

    Gain 2

    Multiplication Element-wise(K.*u)

    Parameter minimum []

    Parameter maximum []

    Parameter data type Inherit: Inherit via internal rule

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    Sample time (-1 for inhe-

    rited)

    -1

    "ma2c" (MagnitudeAngleToComplex)

    Table 2.13. "ma2c" Parameters

    Parameter Value

    Input Magnitude and angle

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    14/46

    Root System

    8

    Parameter Value

    Angle 0

    Approximation method None

    Number of iterations 11

    Scale output by reciproc-

    al of gain factor

    on

    Sample time (-1 for inhe-

    rited)

    -1

    "Math Function" (Math)

    Table 2.14. "Math Function" Parameters

    Parameter Value

    Function exp

    Sample time (-1 for inhe-

    rited)

    -1

    Output minimum []

    Output maximum []

    Output data type Inherit: Same as first input

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    on

    Intermediate results data

    type

    Inherit: Inherit via internal rule

    Method Newton-Raphson

    Number of iterations 3

    "Max" (MinMax)

    Table 2.15. "Max" Parameters

    Parameter Value

    Function max

    Number of input ports 2

    Require all inputs to have

    the same data type

    off

    Output minimum []

    Output maximum []

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    15/46

    Root System

    9

    Parameter Value

    Output data type Inherit: Inherit via internal rule

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    Enable zero-crossing det-

    ection

    on

    Sample time (-1 for inhe-

    rited)

    -1

    "Min" (MinMax)

    Table 2.16. "Min" Parameters

    Parameter Value

    Function min

    Number of input ports 2

    Require all inputs to have

    the same data type

    off

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock output data type se-

    tting against changes by

    the fixed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    Enable zero-crossing det-

    ection

    on

    Sample time (-1 for inhe-

    rited)

    -1

    "Permute Dimensions" (PermuteDimensions)

    Table 2.17. "Permute Dimensions" Parameters

    Parameter Value

    Order [2,1]

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    16/46

    Root System

    10

    "Polynomial" (Polyval)

    Table 2.18. "Polynomial" Parameters

    Parameter Value

    Polynomial Coefficients [ 1 2 ]

    "Product" (Product)

    Table 2.19. "Product" Parameters

    Parameter Value

    Number of inputs 2

    Multiplication Element-wise(.*)

    Multiply over All dimensions

    Dimension 1

    Require all inputs to have

    the same data type

    off

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock output data type se-

    tting against changes bythe fixed-point tools

    off

    Integer rounding mode Zero

    Saturate on integer overf-

    low

    off

    Sample time (-1 for inhe-

    rited)

    -1

    "Reshape" (Reshape)

    Table 2.20. "Reshape" Parameters

    Parameter Value

    Output dimensionality Customize

    Output dimensions [1,1,2]

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    17/46

    Root System

    11

    "ri2c" (RealImagToComplex)

    Table 2.21. "ri2c" Parameters

    Parameter Value

    Input Real and imagImag part 0

    Sample time (-1 for inhe-

    rited)

    -1

    "Round" (Rounding)

    Table 2.22. "Round" Parameters

    Parameter Value

    Function ceil

    Sample time (-1 for inhe-

    rited)

    -1

    "Sign" (Signum)

    Table 2.23. "Sign" Parameters

    Parameter Value

    Enable zero-crossing det-ection on

    Sample time (-1 for inhe-

    rited)

    -1

    "Sine Wave" (Sin)

    Table 2.24. "Sine Wave" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    18/46

    Root System

    12

    Parameter Value

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave1" (Sin)

    Table 2.25. "Sine Wave1" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave10" (Sin)

    Table 2.26. "Sine Wave10" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    19/46

    Root System

    13

    Parameter Value

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave11" (Sin)

    Table 2.27. "Sine Wave11" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave12" (Sin)

    Table 2.28. "Sine Wave12" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 2

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    20/46

    Root System

    14

    "Sine Wave13" (Sin)

    Table 2.29. "Sine Wave13" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-ers as 1-D

    on

    "Sine Wave14" (Sin)

    Table 2.30. "Sine Wave14" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave15" (Sin)

    Table 2.31. "Sine Wave15" Parameters

    Parameter Value

    Sine type Time based

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    21/46

    Root System

    15

    Parameter Value

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave16" (Sin)

    Table 2.32. "Sine Wave16" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave17" (Sin)

    Table 2.33. "Sine Wave17" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    22/46

    Root System

    16

    Parameter Value

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave18" (Sin)

    Table 2.34. "Sine Wave18" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave19" (Sin)

    Table 2.35. "Sine Wave19" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias .2

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    23/46

    Root System

    17

    Parameter Value

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave2" (Sin)

    Table 2.36. "Sine Wave2" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave20" (Sin)

    Table 2.37. "Sine Wave20" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 2

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    24/46

    Root System

    18

    Parameter Value

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave21" (Sin)

    Table 2.38. "Sine Wave21" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 2

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave22" (Sin)

    Table 2.39. "Sine Wave22" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 2

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    25/46

    Root System

    19

    "Sine Wave23" (Sin)

    Table 2.40. "Sine Wave23" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-ers as 1-D

    on

    "Sine Wave24" (Sin)

    Table 2.41. "Sine Wave24" Parameters

    Parameter Value

    Sine type Sample based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time .1

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave3" (Sin)

    Table 2.42. "Sine Wave3" Parameters

    Parameter Value

    Sine type Time based

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    26/46

    Root System

    20

    Parameter Value

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave4" (Sin)

    Table 2.43. "Sine Wave4" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 2

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave5" (Sin)

    Table 2.44. "Sine Wave5" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    27/46

    Root System

    21

    Parameter Value

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave6" (Sin)

    Table 2.45. "Sine Wave6" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude pi

    Bias 0

    Frequency (rad/sec) 3

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave7" (Sin)

    Table 2.46. "Sine Wave7" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 3

    Bias 0

    Frequency (rad/sec) 3

    Phase (rad) 0

    Samples per period 10

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    28/46

    Root System

    22

    Parameter Value

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave8" (Sin)

    Table 2.47. "Sine Wave8" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 1

    Bias 0

    Frequency (rad/sec) 2

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

    Interpret vector paramet-

    ers as 1-D

    on

    "Sine Wave9" (Sin)

    Table 2.48. "Sine Wave9" Parameters

    Parameter Value

    Sine type Time based

    Time (t) Use simulation time

    Amplitude 2

    Bias 0

    Frequency (rad/sec) 1

    Phase (rad) 0

    Samples per period 10

    Number of offset sampl-

    es

    0

    Sample time 0

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    29/46

    Root System

    23

    Parameter Value

    Interpret vector paramet-

    ers as 1-D

    on

    "Sumel" (Sum)

    Table 2.49. "Sumel" Parameters

    Parameter Value

    Icon shape rectangular

    List of signs +

    Sum over All dimensions

    Dimension 1

    Require all inputs to have

    the same data type

    off

    Accumulator data type Inherit: Inherit via internal rule

    Output minimum []

    Output maximum []

    Output data type Inherit: Inherit via internal rule

    Lock data type settings

    against changes by the fi-

    xed-point tools

    off

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

    Sample time (-1 for inhe-

    rited)

    -1

    "timemath" (SampleTimeMath)

    Table 2.50. "timemath" Parameters

    Parameter Value

    Operation *

    Weight value 1.0

    Implement using Online Calculations

    Output data type Inherit: Inherit via internal rule

    Integer rounding mode Floor

    Saturate on integer overf-

    low

    off

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    30/46

    Root System

    24

    "Trig" (Trigonometry)

    Table 2.51. "Trig" Parameters

    Parameter Value

    Function cosApproximation method None

    Number of iterations 11

    Sample time (-1 for inhe-

    rited)

    -1

    "Unary Minus" (UnaryMinus)

    Table 2.52. "Unary Minus" Parameters

    Parameter Value

    Sample time (-1 for inhe-

    rited)

    -1

    Saturate on integer overf-

    low

    off

    Block Execution Order

    1. Sine Wave [11] (Sin)

    2. Abs [3] (Abs)

    3. Sine Wave1 [12] (Sin)

    4. Sine Wave2 [17] (Sin)5. Add [3] (Sum)

    6. Sine Wave3 [19] (Sin)

    7. Sine Wave4 [20] (Sin)

    8. Assignment [4] (Assignment)

    9. Sine Wave5 [20] (Sin)

    10. Bias [4] (Bias)

    11. Constant [5] (Constant)

    12. Sine Wave16 [15] (Sin)

    13. Max [8] (MinMax)

    14. Min [9] (MinMax)

    15. Constant1 [5] (Constant)

    16. Sine Wave17 [15] (Sin)

    17. Product [10] (Product)

    18. Sine Wave9 [22] (Sin)

    19. Sine Wave10 [12] (Sin)

    20. Dot Product [6] (DotProduct)

    21. Sine Wave11 [13] (Sin)

    22. Gain [7] (Gain)

    23. Sine Wave13 [13] (Sin)

    24. Math Function [8] (Math)

    25. Sine Wave14 [14] (Sin)

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    31/46

    Root System

    25

    26. Sine Wave15 [14] (Sin)

    27. concat [5] (Concatenate)

    28. Reshape [10] (Reshape)

    29. Permute Dimensions [9] (PermuteDimensions)

    30. elprod [6] (Product)

    31. Sine Wave18 [16] (Sin)

    32. Polynomial [10] (Polyval)33. Sine Wave19 [16] (Sin)

    34. Round [11] (Rounding)

    35. Sine Wave20 [17] (Sin)

    36. Sign [11] (Signum)

    37. Sine Wave12 [13] (Sin)

    38. Sine Wave6 [21] (Sin)

    39. ma2c [7] (MagnitudeAngleToComplex)

    40. c2ri [5] (ComplexToRealImag)

    41. Sine Wave21 [18] (Sin)

    42. Sumel [23] (Sum)

    43. Sine Wave22 [18] (Sin)

    44. Trig [23] (Trigonometry)

    45. Sine Wave23 [18] (Sin)46. Unary Minus [24] (UnaryMinus)

    47. Sine Wave24 [19] (Sin)

    48. timemath [23] (SampleTimeMath)

    49. Sine Wave7 [21] (Sin)

    50. Sine Wave8 [22] (Sin)

    51. ri2c [10] (RealImagToComplex)

    52. c2ma [4] (ComplexToMagnitudeAngle)

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    32/46

    26

    Chapter 3. System Design Variables

    Table of Contents

    Design Variable Summary ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... .... 26

    Design Variable Summary

    Table 3.1. Functions used in Design Variable Expressions

    Function Na-

    me

    Parent Blocks Calling string

    pi Sine Wave6 [21]   pi

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    33/46

    27

    Chapter 4. System Model ConfigurationSource: Model

    Source Name: SDD_math

    Table 4.1. SDD_math Configuration Set

    Property Value

    Description

    Components [SDD_math Configuration Set.Components(1) [-

    27], SDD_math Configuration Set.Componen-

    ts(2) [28], SDD_math Configuration Set.Com-

    ponents(3) [29], SDD_math Configuration Se-

    t.Components(4) [30], SDD_math Configurat-

    ion Set.Components(5) [33], SDD_math Conf-

    iguration Set.Components(6) [34], SDD_math

    Configuration Set.Components(7) [34], SDD-_math Configuration Set.Components(8) [35],

    SDD_math Configuration Set.Components(9) [-

    37]]

    Name Configuration

    SimulationMode normal

    Table 4.2. SDD_math Configuration Set.Components [27](1)

    Property Value

    Name Solver

    Description

    Components

    StartTime 0.0

    StopTime 10

    AbsTol auto

    FixedStep auto

    InitialStep auto

    MaxNumMinSteps -1

    MaxOrder 5

    ZcThreshold auto

    ConsecutiveZCsStepRelTol 10*128*eps

    MaxConsecutiveZCs 1000

    ExtrapolationOrder 4

    NumberNewtonIterations 1

    MaxStep auto

    MinStep auto

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    34/46

    System Model Configuration

    28

    MaxConsecutiveMinStep 1

    RelTol 1e-3

    SolverMode Auto

    EnableConcurrentExecution off

    ConcurrentTasks off

    Solver ode45

    SolverName ode45

    SolverType Variable-step

    SolverJacobianMethodControl auto

    ShapePreserveControl DisableAll

    ZeroCrossControl UseLocalSettings

    ZeroCrossAlgorithm Nonadaptive

    SolverResetMethod Fast

    PositivePriorityOrder off

    AutoInsertRateTranBlk off

    SampleTimeConstraint Unconstrained

    InsertRTBMode Whenever possible

    SampleTimeProperty

    Table 4.3. SDD_math Configuration Set.Components [27](2)

    Property Value

    Name Data Import/Export

    Description

    Components

    Decimation 1

    ExternalInput [t, u]

    FinalStateName xFinal

    InitialState xInitial

    LimitDataPoints on

    MaxDataPoints 1000

    LoadExternalInput off

    LoadInitialState off

    SaveFinalState off

    SaveCompleteFinalSimState off

    SaveFormat Array

    SignalLoggingSaveFormat ModelDataLogs

    SaveOutput on

    SaveState off

    SignalLogging on

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    35/46

    System Model Configuration

    29

    DSMLogging on

    InspectSignalLogs off

    VisualizeSimOutput on

    StreamToWorkspace off

    StreamVariableName streamout

    SaveTime on

    ReturnWorkspaceOutputs off

    StateSaveName xout

    TimeSaveName tout

    OutputSaveName yout

    SignalLoggingName logsout

    DSMLoggingName dsmout

    OutputOption RefineOutputTimes

    OutputTimes []

    ReturnWorkspaceOutputsName out

    Refine 1

    LoggingIntervals [-inf, inf]

    Table 4.4. SDD_math Configuration Set.Components [27](3)

    Property Value

    Name Optimization

    Description

    Components

    BlockReduction off

    BooleanDataType on

    ConditionallyExecuteInputs on

    DefaultParameterBehavior Tunable

    InlineParams off

    UseDivisionForNetSlopeComputation off

    UseFloatMulNetSlope off

    DefaultUnderspecifiedDataType double

    UseSpecifiedMinMax off

    InlineInvariantSignals off

    OptimizeBlockIOStorage on

    BufferReuse on

    GlobalBufferReuse on

    GlobalVariableUsage None

    StrengthReduction off

    AdvancedOptControl

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    36/46

    System Model Configuration

    30

    EnforceIntegerDowncast on

    ExpressionFolding on

    BooleansAsBitfields off

    BitfieldContainerType uint_T

    EnableMemcpy on

    MemcpyThreshold 64

    PassReuseOutputArgsAs Structure reference

    PassReuseOutputArgsThreshold 12

    FoldNonRolledExpr on

    LocalBlockOutputs on

    RollThreshold 5

    StateBitsets off

    DataBitsets off

    ActiveStateOutputEnumStorageType Native Integer

    UseTempVars off

    ZeroExternalMemoryAtStartup on

    ZeroInternalMemoryAtStartup on

    InitFltsAndDblsToZero on

    NoFixptDivByZeroProtection off

    EfficientFloat2IntCast off

    EfficientMapNaN2IntZero on

    OptimizeModelRefInitCode off

    LifeSpan inf

    EvaledLifeSpan Inf

    MaxStackSize Inherit from target

    BufferReusableBoundary on

    SimCompilerOptimization off

    AccelVerboseBuild off

    Table 4.5. SDD_math Configuration Set.Components [27](4)

    Property Value

    Name Diagnostics

    Description

    Components

    RTPrefix error

    ConsistencyChecking none

    ArrayBoundsChecking none

    SignalInfNanChecking none

    SignalRangeChecking none

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    37/46

    System Model Configuration

    31

    ReadBeforeWriteMsg UseLocalSettings

    WriteAfterWriteMsg UseLocalSettings

    WriteAfterReadMsg UseLocalSettings

    AlgebraicLoopMsg warning

    ArtificialAlgebraicLoopMsg warning

    SaveWithDisabledLinksMsg warning

    SaveWithParameterizedLinksMsg none

    CheckSSInitialOutputMsg on

    UnderspecifiedInitializationDetection Classic

    MergeDetectMultiDrivingBlocksExec none

    CheckExecutionContextPreStartOutputMsg off

    CheckExecutionContextRuntimeOutputMsg off

    SignalResolutionControl TryResolveAllWithWarning

    BlockPriorityViolationMsg warning

    MinStepSizeMsg warning

    TimeAdjustmentMsg none

    MaxConsecutiveZCsMsg error

    MaskedZcDiagnostic warning

    IgnoredZcDiagnostic warning

    SolverPrmCheckMsg none

    InheritedTsInSrcMsg warning

    MultiTaskDSMMsg warning

    MultiTaskCondExecSysMsg none

    MultiTaskRateTransMsg error

    SingleTaskRateTransMsg none

    TasksWithSamePriorityMsg warning

    SigSpecEnsureSampleTimeMsg warning

    CheckMatrixSingularityMsg none

    IntegerOverflowMsg warning

    Int32ToFloatConvMsg warning

    ParameterDowncastMsg error

    ParameterOverflowMsg error

    ParameterUnderflowMsg noneParameterPrecisionLossMsg warning

    ParameterTunabilityLossMsg warning

    FixptConstUnderflowMsg none

    FixptConstOverflowMsg none

    FixptConstPrecisionLossMsg none

    UnderSpecifiedDataTypeMsg none

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    38/46

    System Model Configuration

    32

    UnnecessaryDatatypeConvMsg none

    VectorMatrixConversionMsg none

    InvalidFcnCallConnMsg error

    FcnCallInpInsideContextMsg UseLocalSettings

    SignalLabelMismatchMsg none

    UnconnectedInputMsg warning

    UnconnectedOutputMsg warning

    UnconnectedLineMsg warning

    SFcnCompatibilityMsg none

    FrameProcessingCompatibilityMsg error

    UniqueDataStoreMsg none

    BusObjectLabelMismatch warning

    RootOutportRequireBusObject warning

    AssertControl UseLocalSettings

    Echo

    EnableOverflowDetection off

    AllowSymbolicDim off

    ModelReferenceIOMsg none

    ModelReferenceVersionMismatchMessage none

    ModelReferenceIOMismatchMessage none

    ModelReferenceCSMismatchMessage none

    ModelReferenceSimTargetVerbose off

    UnknownTsInhSupMsg warning

    ModelReferenceDataLoggingMessage warning

    ModelReferenceSymbolNameMessage warning

    ModelReferenceExtraNoncontSigs error

    StateNameClashWarn warning

    SimStateInterfaceChecksumMismatchMsg warning

    SimStateOlderReleaseMsg error

    InitInArrayFormatMsg warning

    StrictBusMsg ErrorLevel1

    BusNameAdapt WarnAndRepair

    NonBusSignalsTreatedAsBus noneSFUnusedDataAndEventsDiag warning

    SFUnexpectedBacktrackingDiag warning

    SFInvalidInputDataAccessInChartInitDiag warning

    SFNoUnconditionalDefaultTransitionDiag warning

    SFTransitionOutsideNaturalParentDiag warning

    SFUnconditionalTransitionShadowingDiag warning

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    39/46

    System Model Configuration

    33

    SFUndirectedBroadcastEventsDiag warning

    SFTransitionActionBeforeConditionDiag warning

    SFOutputUsedAsStateInMooreChartDiag error

    IntegerSaturationMsg warning

    Table 4.6. SDD_math Configuration Set.Components [27](5)

    Property Value

    Name Hardware Implementation

    Description

    Components

    ProdBitPerChar 8

    ProdBitPerShort 16

    ProdBitPerInt 32

    ProdBitPerLong 32

    ProdBitPerLongLong 64

    ProdBitPerFloat 32

    ProdBitPerDouble 64

    ProdBitPerPointer 32

    ProdLargestAtomicInteger Char

    ProdLargestAtomicFloat None

    ProdIntDivRoundTo Undefined

    ProdEndianess Unspecified

    ProdWordSize 32

    ProdShiftRightIntArith on

    ProdLongLongMode off

    ProdHWDeviceType 32-bit Generic

    TargetBitPerChar 8

    TargetBitPerShort 16

    TargetBitPerInt 32

    TargetBitPerLong 32

    TargetBitPerLongLong 64

    TargetBitPerFloat 32

    TargetBitPerDouble 64

    TargetBitPerPointer 32

    TargetLargestAtomicInteger Char

    TargetLargestAtomicFloat None

    TargetShiftRightIntArith on

    TargetLongLongMode off

    TargetIntDivRoundTo Undefined

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    40/46

    System Model Configuration

    34

    TargetEndianess Unspecified

    TargetWordSize 32

    TargetTypeEmulationWarnSuppressLevel 0

    TargetPreprocMaxBitsSint 32

    TargetPreprocMaxBitsUint 32

    TargetHWDeviceType Specified

    TargetUnknown off

    ProdEqTarget on

    Table 4.7. SDD_math Configuration Set.Components [27](6)

    Property Value

    Name Model Referencing

    Description

    Components

    UpdateModelReferenceTargets IfOutOfDateOrStructuralChange

    SkipRefExpFcnMdlSchedulingOrderCheck off

    EnableRefExpFcnMdlSchedulingChecks on

    CheckModelReferenceTargetMessage error

    EnableParallelModelReferenceBuilds off

    ParallelModelReferenceErrorOnInvalidPool on

    ParallelModelReferenceMATLABWorkerInit None

    ModelReferenceNumInstancesAllowed Multi

    PropagateVarSize Infer from blocks in model

    ModelDependencies

    ModelReferencePassRootInputsByReference on

    ModelReferenceMinAlgLoopOccurrences off

    PropagateSignalLabelsOutOfModel off

    SupportModelReferenceSimTargetCustomCode off

    Table 4.8. SDD_math Configuration Set.Components [27](7)

    Property Value

    Name Simulation Target

    Description

    Components

    SimCustomSourceCode

    SimCustomHeaderCode

    SimCustomInitializer

    SimCustomTerminator

    SimReservedNameArray

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    41/46

    System Model Configuration

    35

    SimUserSources

    SimUserIncludeDirs

    SimUserLibraries

    SFSimEnableDebug off

    SFSimOverflowDetection on

    SFSimEcho on

    SimBlas on

    SimCtrlC on

    SimExtrinsic on

    SimIntegrity on

    SimUseLocalCustomCode off

    SimParseCustomCode on

    SimBuildMode sf_incremental_build

    SimDataInitializer

    SimGenImportedTypeDefs off

    Table 4.9. SDD_math Configuration Set.Components [27](8)

    Property Value

    Name Code Generation

    SystemTargetFile grt.tlc

    TLCOptions

    CodeGenDirectory

    GenCodeOnly off

    MakeCommand make_rtw

    GenerateMakefile on

    PackageGeneratedCodeAndArtifacts off

    PackageName

    TemplateMakefile grt_default_tmf

    PostCodeGenCommand

    Description

    GenerateReport off

    SaveLog off

    RTWVerbose on

    RetainRTWFile off

    ProfileTLC off

    TLCDebug off

    TLCCoverage off

    TLCAssert off

    ProcessScriptMode Default

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    42/46

    System Model Configuration

    36

    ConfigurationMode Optimized

    ProcessScript

    ConfigurationScript

    ConfigAtBuild off

    RTWUseLocalCustomCode off

    RTWUseSimCustomCode off

    CustomSourceCode

    CustomHeaderCode

    CustomInclude

    CustomSource

    CustomLibrary

    CustomInitializer

    CustomTerminator

    Toolchain Automatically locate an installed toolchain

    BuildConfiguration Faster Builds

    CustomToolchainOptions

    IncludeHyperlinkInReport off

    LaunchReport off

    PortableWordSizes off

    GenerateErtSFunction off

    CreateSILPILBlock None

    CodeExecutionProfiling off

    CodeExecutionProfileVariable executionProfile

    CodeProfilingSaveOptions SummaryOnly

    CodeProfilingInstrumentation off

    SILDebugging off

    TargetLang C

    IncludeERTFirstTime on

    GenerateTraceInfo off

    GenerateTraceReport off

    GenerateTraceReportSl off

    GenerateTraceReportSf off

    GenerateTraceReportEml offGenerateCodeInfo off

    GenerateWebview off

    GenerateCodeMetricsReport off

    GenerateCodeReplacementReport off

    RTWCompilerOptimization off

    ObjectivePriorities

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    43/46

    System Model Configuration

    37

    RTWCustomCompilerOptimizations

    CheckMdlBeforeBuild Off

    CustomRebuildMode OnUpdate

    DataInitializer

    Components [SDD_math Configuration Set.Components(8).C-

    omponents(1) [37], SDD_math Configuration

    Set.Components(8).Components(2) [39]]

    Table 4.10. SDD_math Configuration Set.Components [27](9)

    Property Value

    Description Simulink Coverage Configuration Component

    Components

    Name Simulink Coverage

    RecordCoverage onCovPath /

    CovSaveName covdata

    CovCompData

    CovMetricSettings rw

    CovFilter

    CovHTMLOptions

    CovNameIncrementing off

    CovHtmlReporting on

    CovForceBlockReductionOff on

    CovEnableCumulative on

    CovSaveCumulativeToWorkspaceVar on

    CovSaveSingleToWorkspaceVar on

    CovCumulativeVarName covCumulativeData

    CovCumulativeReport off

    CovReportOnPause on

    CovModelRefEnable Off

    CovModelRefExcluded

    CovExternalEMLEnable off

    CovSFcnEnable on

    CovBoundaryAbsTol 1.0000e-05

    CovBoundaryRelTol 0.0100

    CovUseTimeInterval off

    CovStartTime 0

    CovStopTime 0

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    44/46

    System Model Configuration

    38

    Table 4.11. SDD_math Configuration Set.Components(8).Components [37](1)

    Property Value

    Name Code Appearance

    Description

    ComponentsForceParamTrailComments off

    GenerateComments on

    CommentStyle Auto

    IgnoreCustomStorageClasses on

    IgnoreTestpoints off

    IncHierarchyInIds off

    MaxIdLength 31

    PreserveName off

    PreserveNameWithParent off

    ShowEliminatedStatement off

    OperatorAnnotations off

    IncAutoGenComments off

    SimulinkDataObjDesc off

    SFDataObjDesc off

    MATLABFcnDesc off

    IncDataTypeInIds off

    PrefixModelToSubsysFcnNames on

    MangleLength 1

    CustomSymbolStr $R$N$M

    CustomSymbolStrGlobalVar $R$N$M

    CustomSymbolStrType $N$R$M_T

    CustomSymbolStrField $N$M

    CustomSymbolStrFcn $R$N$M$F

    CustomSymbolStrFcnArg rt$I$N$M

    CustomSymbolStrBlkIO rtb_$N$M

    CustomSymbolStrTmpVar $N$M

    CustomSymbolStrMacro $R$N$M

    CustomSymbolStrUtil $N$C

    CustomCommentsFcn

    DefineNamingRule None

    DefineNamingFcn

    ParamNamingRule None

    ParamNamingFcn

    SignalNamingRule None

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    45/46

    System Model Configuration

    39

    SignalNamingFcn

    InsertBlockDesc off

    InsertPolySpaceComments off

    SimulinkBlockComments on

    MATLABSourceComments off

    EnableCustomComments off

    InternalIdentifier Shortened

    InlinedPrmAccess Literals

    ReqsInCode off

    UseSimReservedNames off

    ReservedNameArray

    Table 4.12. SDD_math Configuration Set.Components(8).Components [37](2)

    Property Value

    Name Target

    Description

    Components

    IsERTTarget off

    TargetFcnLib ansi_tfl_tmw.mat

    TargetLibSuffix

    TargetPreCompLibLocation

    GenFloatMathFcnCalls NOT IN USE

    TargetLangStandard C89/C90 (ANSI)

    TargetFunctionLibrary NOT IN USE

    CodeReplacementLibrary None

    UtilityFuncGeneration Auto

    ERTMultiwordTypeDef System defined

    ERTMultiwordLength 256

    MultiwordLength 2048

    GenerateFullHeader on

    InferredTypesCompatibility off

    GenerateSampleERTMain off

    GenerateTestInterfaces off

    ModelReferenceCompliant on

    ParMdlRefBuildCompliant on

    CompOptLevelCompliant on

    ConcurrentExecutionCompliant on

    IncludeMdlTerminateFcn on

    CombineOutputUpdateFcns off

  • 8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Math

    46/46

    System Model Configuration

    CombineSignalStateStructs off

    SuppressErrorStatus off

    ERTFirstTimeCompliant off

    IncludeFileDelimiter Auto

    ERTCustomFileBanners off

    SupportAbsoluteTime on

    LogVarNameModifier rt_

    MatFileLogging on

    MultiInstanceERTCode off

    CodeInterfacePackaging Nonreusable function

    SupportNonFinite on

    SupportComplex on

    PurelyIntegerCode off

    SupportContinuousTime on

    SupportNonInlinedSFcns on

    SupportVariableSizeSignals off

    ParenthesesLevel Nominal

    CastingMode Nominal

    GenerateClassInterface off

    ModelStepFunctionPrototypeControlCompliant off

    CPPClassGenCompliant on

    GRTInterface on

    GenerateAllocFcn off

    UseToolchainInfoCompliant on

    GenerateSharedConstants on

    ExtMode off

    ExtModeStaticAlloc off

    ExtModeTesting off

    ExtModeStaticAllocSize 1000000

    ExtModeTransport 0

    ExtModeMexFile ext_comm

    ExtModeMexArgs

    ExtModeIntrfLevel Level1RTWCAPISignals off

    RTWCAPIParams off

    RTWCAPIStates off

    RTWCAPIRootIO off