-
NOTE: Clean platform using
(2.A)
(2.B)
(2.F)
Isopropyl Alcohol before installing into modeler.
Open the chamber door. Align platform’s rear notch into
x-carriage’s locating tab
Align platform’s front notch into latch’s front locating tab and
secure latch.
Close the front door
and press ONLINE.
(2.C).
(2.B)(2.D )
2.B
POWER SUPPLY PLATFORM INSTALLATION
2.D
Quick Reference GuideQuick Reference GuideBEFORE OPERATING THE
MODELER, ADHERE TO ALL PERSONAL AND SAFE HANDLING OF MATERIALS
DESCRIBED IN THE SAFETY SECTIONS
TMOF THE PROJET USER GUIDE.
2.A
2.C
2.E2.F
Plug p
Switch power on
Plug RJ-4C cable into terminal on back side of modeler and into
computer’s USB terminal.
ower cord into power outlet on back side of modeler and into
facility’s power outlet.
(A)
(B).
(C)
Verify facility’s electrical service rating before connecting
power to the modeler.
Facility electrical requirement: Grounded, 1-phase electrical
circuitService rating: 100–127 VAC, 50/60 Hz, 15A (max.)
3D Systems Confidential
BCBB
A
3-D Modelers
NOTE:A Ethernet cable is required when connecting from the
modeler to the end user’s computer.
shielded (C)
PN 305175-00, Rev. C, 10/08
TM TM It will be necessary to register your ProJet 3-D
Production System, to access the ProJet Online User Guide. To
register, type in “ projet.3dsystems.com” in the explorer browser.
You will be asked to supply a “User ID” which should be something
that is easily remembered; and a password. Your password is your
modeler's serial number that is located on the back side of the
machine. Once registered, an email confirmation will be sent to you
with a link to 3D Systems' 3dpedia login page.
(http://3dpedia.3dsystems.com) . Please log in using the user name
and password as in the confirmation email to access the user
guide.
-
Quick Reference Guide
1
TOperator PanelBedienungstafel • Panneau de l'opérateur • Panel
del operador • Pannello per l’operatore Operatörspanel •
Operatørpanel • Käyttöpaneeli
Pause jobDruckauftrag pausierenPause de la réalisationPausa del
trabajo de impresiónSospensione del lavoro di stampa
online / offlineDrucker online / offlineImprimante en / hors
ligneImpresora en línea / fuera de líneaStampante in linea / fuori
linea
Abort jobDruckauftrag abbrechenInterrompre la réalisationAnular
trabajo de impresiónInterruzione del lavorodi stampa
LCD DisplayLCD-DisplayAffichage LCDPantalla LCDDisplay LCD
Scroll DownMenüoptionen rollenDéfilement des options de
menuOpciones del menú de desplazamientoScorrimento delle opzioni di
menu
Confirm YESBestätigen YESConfirmer YESConfirmar YESConferma
YES
Menu optionsMenüoptionenOptions de menuOpciones de menúOpzioni
del menu
Confirm NOBestätigen NOConfirmer NOConfirmar NOConferma NO
Light on/offLicht an/ausÉclairage en / horsIluminación encendida
/apagadaSpia accesa / spenta
Scroll UpMenüoptionen rollenDéfilement des options de
menuOpciones del menú de desplazamientoScorrimento delle opzioni di
menuC D
F
E
A
BB
FAMILIARIZATION
Quick Reference Guide
Build chamber access door Zugangstür zur Prozesskammer Porte
d'accès à la chambre deréalisation Puerta de acceso a la cámara de
construcción Sportello di accesso alla camera di
costruzioneÅtkomstlucka till byggkammaren Adgangsdør til
byggekammerRakennuskammion luukku
Build platform Bauplattform Plate-forme de réalisation
Plataforma deconstrucción Piattaforma di costruzioneByggplattform
Byggeplatform Rakennusalusta
• •
• • • •
(Behind (A)• • •
• •
Support material feed slot door • Tür zur Stützmaterialzufuhr
Porte de la fente de rechargement dumatériau des supportsPuerta con
ranura de alimentación para el material del soporte Sportello della
scanalatura di alimentazione del materiale di supporto • Dörr till
stödmaterialurtaget • Dør til påfyldning af støttemateriale •
Tukimateriaalin syöttöaukon luukku
Model material feed slot door • Tür zur
ModellmaterialzufuhrPorte de la fente de rechargement du matériau
des modèlesPuerta con ranura de alimentación para el material del
modeloSportello della scanalatura di alimentazione del materiale
del modelloDörr till modellmaterialurtage • Dør til påfyldning af
modelmaterialeMallimateriaalin syöttöaukon luukku
Power plug and switch (rear) • Netzstecker und -schalter
(Rückseite)Prise d'alimentation etcommutateur (face arrière) •
Enchufe e interruptor dealimentación eléctrica (posterior) •
Interruttore e spina dialimentazione (sul retro) • Eluttag och
strömbrytare (baksidan)Netstik og afbryderkontakt (bagsiden) •
Vahvavirtapistoke ja kytkin (takana)
Waste material drawer • Abfallmaterialschublade • Tiroir à
déchets • Gaveta para el material de desecho • Cassetto del
materiale discarto • Utdragslåda för avfall • Skuffe til
affaldsmaterialeJätemateriaalilaatikko
A
C
D
E
F
BB
BEFORE OPERATING THE MODELER, ADHERE TO ALL PERSONAL AND SAFE
HANDLING OF MATERIALS DESCRIBED IN THE SAFETY SECTIONS OF THE USER
GUIDE.
3D Systems Confidential
3-D Modelers
-
1ABA
B
C
Open left and right material feed slot doors.
Insert white support cartridges in left feed slot and black
build cartridges in the right feed slots.
Orient cartridge flat side up • Lower cartridge into slot • Add
8 max. • Close feed slot door.
(1.B) (2.B)
NOTE: For proper operation of the feed system, a minimum of
three (3) support and three (3) build cartridges must be
present.
Support Material
Type: S100
Material
Type: 200
Material
Type: 200
Material
Type: 200
Material
Type: 200
BA
B
C
BD
CAUTION: Before removing waste materials from the waste drawer,
adhere to all personal, and safe handling of materials described in
the Material Safety section in the User Guide.
Always follow MSDS guidelines and local regulations regarding
handling and disposal of regulated materials
Keep disposal records if local law requires.
Press PAUSE and open waste drawer and remove full cartridge
bins.
Remove the material waste bag.
Replace white liner in left bin and black liner in right bin if
the liners are contaminated. Replace waste bag. Close drawer and
Press RESUME to resume build.
Quick Reference GuideQuick Reference GuideBEFORE OPERATING THE
MODELER, ADHERE TO ALL PERSONAL AND SAFE HANDLING OF MATERIALS
DESCRIBED IN THE SAFETY SECTIONS OF THE USER GUIDE.
SUPPORT & BUILD MATERIAL CARTRIDGES INSTALLATION
Support Material
Type: S100Support M
aterial Type: S100
Support Material
Type: S100
BA
BBSUPPORTSIDE
BUILDSIDE1
B1.B
B2.BFlat Side of Cartridges
C
BA
B
2.F
C
BD
EMPTYING WASTE DRAWER
3D Systems Confidential
3-D Modelers
-
OPERATION
Submit Test Build
(B1) (B2) (B3) P(B4) (B5) PX (B6) P(B7)
X (B8)NOTE: It is recommended to submit a Test Build prior to
each build job.
Build Demo(C1) (C2) (C3) P(C4)(C5)
P(C6)NOTE: Refer to 3dpedia, Projet HD 3-D Modeler User Guide,
under the operation section for the build process, how to remove
parts from the modeler and cleaning parts procedure.
Locate the Sample STL files in 3D Modeling\Samples folder.
Press MENU , Scroll to highlight TEST PRINT and press YES ( ) .
The message PLATFORM CLEAR DOOR CLOSED? Y( ) / N ( ) scrolls across
the display, Press YES ( ) if the platform is clear and door is
closed, otherwise press NO( ).
Press MENU , Scroll to highlight BUILD DEMO and press YES ( ) ;
the system displays PLATFORM CLEAR? Y/N .When platform is clear,
press YES ( ) . The modeler will starts the demo build job.
Quick Reference GuideQuick Reference GuideBEFORE OPERATING THE
MODELER, ADHERE TO ALL PERSONAL AND SAFE HANDLING OF MATERIALS
DESCRIBED IN THE SAFETY SECTIONS OF THE USER GUIDE.
ABA
B
CB
TEST BUILD
B3
PLATFORM CLEAR DOOR CLOSED? Y/N
DEMO BUILD
ABD
E
F
A
D
OK TO POWER OFF XXX
Shut Down ModelerVerify that modeler is not building.
To shut down immediately, abort the current job.
Press MENU, scroll to SHUTDOWN, press YES twice .
When the display shows OK TO POWER OFF XXX, press the power
switch on the rear panel.
To halt shutdown, press ONLINE before pressing power switch.
G
EF
G
B4C4C6 B6,B6,B8,C5
B2C2
B1C1
C3
B5C5
3D Systems333 Three D Systems CircleRock Hill, SC 29730
USATelephone (803) 326-4080TollFree (800) 889-2964
3D Systems – FranceTelephone (+33) 1 69 35 17 17
3D Systems – GermanyTelephone (+49) 6151 357-03D Systems –
Italy, Spain and PortugalTelephone (+39) 039 68904 00
3D Systems-SwitzerlandTel. +41-26-439 95 90
3D Systems – United KingdomTelephone (+44) 1442 282 600
3D Systems – Hong KongTelephone (+852) 29 23 50 773D Systems –
JapanTelephone (+81) 3 5451 1690
3D Systems Contacts
3D Systems Confidential
3-D Modelers
