RackTools User Guide v 2.5

RackTools Version 2.5 User’s Guide - Page

RackTools V2.5 2003 Middle Atlantic Products, Inc.

1

Software for Producing Rack Layouts and Purchase Orders Welcome to RackTools: software that makes it simple and quick to specify Middle Atlantic Products. RackTools has been designed with one purpose in mind: to make it easier to specify and order our products. Using a familiar drag-and-drop interface, RackTools allows contractors and consultants to lay out rack elevations and plan view drawings using a database that includes every product from Middle Atlantic Products. Once you’ve completed your RackTools CAD drawing, you’re only a few clicks away from printing a professional proposal drawing for your client, as well as a Purchase Order form that is ready to be faxed to the factory or to your distributor for immediate processing.

Additional Key Features: • Associated Options are linked to each rack product. Rack options can be specified

quickly and accurately, from a pop-up list that includes only the options that fit the rack you select.

• The entire product database is included. You can select any current product from

the Middle Atlantic Products product line, including the complete RSH custom rackshelf list. RackTools also includes provisions for specifying products from additional manufacturers. You can even add your own measured units to the RSH database!

• Every product shape includes a direct web link. You are never more than one click

away from complete product information. Our unique “Get Specs From Web” option takes you to the exact page on our site for the product you’ve selected. Even A&E spec sheets are included!



2

• RackTools uses the Visio graphics engine. Visio is a nationally recognized leader in providing a powerful interface for creating professional CAD drawings.

We want your experience with RackTools specifying software to be positive from start to finish. If you experience any problems getting started: • Read the User’s Guide. The Guide provides step-by-step instructions that lead you

through the RackTools software. The users guide can be found on the CD in the Users Guide folder.

• Use the included on line help. You will find on line help listed under the RackTools

menu option. • Read the Visio documentation. An understanding of Visio will help you identify and

address problems. • Get the latest RackTools files and updates at www.racktools.com • If all else fails… e-mail [email protected], and we’ll be glad to

help. Unfortunately, we cannot provide RackTools help on the telephone, so please e-mail us and we’ll respond promptly.

NNEEWW!! IInn RRaacckkTToooollss 22..55

This update provides a number of the important features our users have been requesting, including:

- New Products. RackTools now includes Surveillance and Monitoring Consoles from Middle Atlantic Products.

- Plan View. All Enclosure and Console layouts are automatically created in plan view, in addition to elevation view.

- Side Panels. Side panels can now be separated and placed on the ends of multi-bay rack and console layouts.

- Studio Furniture. Studio Furniture is now represented in elevation view, in addition to plan view.



3

NNEEWW!! IInn PPrreevviioouuss VVeerrssiioonnss

This update provides a number of the important features our users have been requesting, including:

- Customer Supplied Shapes. Customer Supplied components are now available in 19”, 23” and 24” panel widths. - Support for Visio 2002. RackTools now supports Visio 2002, as well as Visio 2000.

- Additional Shapes. User definable shapes for Patch Panels, Routers and Hubs have been added to make RackTools even easier to use. - Update via the web. A powerful new utility allows you to update your RackTools data at your convenience via the internet. This includes new products and pricing changes, as well as our RSH measured unit database (which is updated daily!). - Export Reports. All reports generated by RackTools can now be exported to MS Word from the report screen, or to any other format (.xls, .html, etc) from the report preview screen. - RSH Components appear in pick list. Components specified to mount in RSH custom Rackshelves are now listed in the “Non Middle Atlantic Items” report for easy to make it possible for you to order all components required using RackTools. - Project Info page now available in all versions. Consumer registered versions of RackTools can now access the project info page to assist in project planning. Thank you for specifying and using Middle Atlantic Products!



4

Contents Introduction.......................................................................................................... 1-3 Contents ...................................................................................................................4 Software/Hardware Requirements ...........................................................................5 Installation Instructions............................................................................................5 RackTools Basics – Quick Tour Starting RackTools for the First Time .................................................................6 Entering Project Information ...............................................................................7 RackTools Stencils and Master Shapes ......................................................... 8-12 Adding Products to the Drawing Page......................................................... 13-14 Specifying RSH Custom Rackshelves ...............................................................14 Adding a New Measured Unit to the RSH Database..........................................15 RackTools on Drop Events ....................................................................................16 Right Click Menu Items.........................................................................................17 View RackTools Shape Data Form....................................................................17 View Accessories...............................................................................................18 Add Accessories (advanced users).....................................................................19 Get Specs From the Web ...................................................................................20 Enable auto Accessory Feature..............................................................................20 Main Menu Items Reports ...............................................................................................................21 Update Via Web.................................................................................................22 Load Cost data ...................................................................................................22 RackTools Help .................................................................................................22 Software License Agreement.................................................................................23



5

Software and Hardware Requirements The minimum requirements to run RackTools efficiently are: Microsoft Windows 98, XP, 2000 or NT Visio 2002 recommended (any version) or 2000 Pentium 166 MHz or greater processor 32 MB of RAM For Visio AND RackTools installation: 100 MB of free hard disk space For RackTools installation only: 20 MB of free hard disk space CD-ROM drive for installation 800X600 screen resolution (1024x768 at 16 Bit color highly recommended)

Installation instructions 1. Uninstall all anti virus software. Install Visio, then re-install all anti virus software. 2. Install Visio on your workstation with the typical (not compact/laptop) install. 3. Install RackTools by double clicking on setup.exe icon located on the RackTools CD. You can also

install RackTools using the Start Menu. Selecting Run, type D:\setup.exe and then click OK. 4. Start RackTools by double clicking on the RackTools icon located on your desktop. 5. The Page Navigation toolbar should be visible. If not, repeat step # 3.

6. RackTools is working properly if you see the RackTools menu displayed between the Shape and Window menu items on the Visio main menu.



6

RackTools Basics – Quick Tour

Starting RackTools For The First Time To start RackTools, find the RackTools icon on the desktop and double click. You can also start RackTools with the Start Menu, by clicking on the RackTools icon. On start up, you will be presented with the RackTools company information screen. You need to complete this form the first time you use RackTools. If you are a Dealer or Distributor and have an unlock code, click on the “Dealer Registration” button and follow the instructions. This company and Dealer Registration information will be retained for future drawings. For all new drawings, simply click the “OK” button to proceed to the first page to start your rack design process. This information can be updated at any time by choosing “Company Information” from the RackTools pull-down menu. • Consumer Version -- RackTools opens as the Consumer Version. Enter the specific data for your

company. This version will display retail pricing in all reports. • Dealer Version -- If you are a Middle Atlantic Products Authorized Dealer or Distributor, obtain the

proper unlock codes from Middle Atlantic Products and use them to register as the RackTools Dealer Version. This version provides “Dealer Net” pricing in reports and automatically creates a new field for COD/Prompt pay pricing called “cost factor discount”. The dealer must enter the specific discount for these terms (eg: if you are on COD terms, or want to see your price after a prompt pay discount, enter the proper %).

Please register your copy of RackTools so that we may notify you of all future upgrades and enhancements:

http://www.racktools.com/regrt.htm



7

Entering Project Information The Project Info page is where you can enter information specific to the current project, such as Client name and address, purchase order number, and ship to address. Follow the instructions below to enter the appropriate information. After you save and reopen the drawing, the project information will be automatically displayed in the title frame. Click on the “ProjectInfo” tab located on the bottom left corner of the drawing page. When the project page appears, double-click anywhere on the page and the information input window will appear. Simply enter the project information in the fields provided, and RackTools will automatically add it to the appropriate reports.

Note for users upgrading from earlier versions of RackTools: When opening drawings created in earlier versions of RackTools some stencils may not appear. To correct this: 1. Go to File>>Stencils>>Open Stencil on the Visio main menu. 2. Open the directory located in C:\Program Files\Middle Atlantic\RackTools 3. Open all the listed stencils at one time by selecting them while holding down the 'Ctrl' key. 4. Save the drawing and it will open correctly the next time.



8

RackTools Stencils and Master Shapes Stencils: A stencil is basically a library where master shapes reside (a collection of master shapes). RackTools stencils mirror the product families in the Middle Atlantic Products catalog: Enclosure Systems, Enclosure Options, Data Cabling Management, Power Products, Security Consoles, Studio Products, Video Monitor Mounts, Accessories, and Custom Rackshelves. Additional stencils provided are Middle Atlantic Products logos and extras. Select a stencil by clicking on the stencil title bar. Each Stencil also contains a General Hardware, Rack Hardware and Line Item shape. General Hardware links to common accessories like rackscrews. Rack Hardware links to the most common rack hardware items, such as caster bases and ganging hardware. The Line Item Master Shape is used for invisible accessory options that are not represented by a master shape, and are specific to the stencil where it is located (items in Accessory Line Items are different from items in Enclosure Systems Line Items). These three shapes are represented on the drawing by a simple box containing the selected part number. These can be put off to the side of the page if the user does not wish for them to be shown on the printout of the final drawing.

Master Shapes: A master shape is a graphical representation of an item (in RackTools, shapes represent specific product types). Most of the rack enclosure shapes have been engineered to have connection points at precise 1.75” spacing. This allows exact placement of rack components at even rackspace increments (identifiable by the blue “x”). The blue “x” denotes a Visio connection point. If you can not see the blue “x” on your drawing page, make sure that the Connection Point toolbar is active by going to View >> Toolbars >> View and making sure View is checked. The shapes that will connect to the Enclosure Systems are programmed to snap into place at the blue cross connection points. When a shape is connected properly, a red block appears at each connection point. If you do not see the red blocks, go to View >> Toolbars >> Snap & Glue. Once a shape is properly connected, it will stay with the Master Shape (eg: you can move a rack on the page and all attached accessories will move with it).



9

Custom Rackshelves Stencil The Custom Rackshelves stencil contains Master Shapes representing the most common types of electronic components. All of these shapes are linked to the extensive Middle Atlantic custom RSH database. Choose the shape that most closely resembles the component you are specifying, and it will scale to the size of the component you select from the pop-up list.

Data Cabling Management Stencil All of the shapes in the Data Cabling Management stencil allow for easy specifying and configuration of the extensive line of structured cabling products.

Enclosure Options Stencil The Enclosure Options stencil contains the most frequently specified options for Middle Atlantic Enclosure Systems, including doors, side panels, and top options.



10

Enclosure Systems Stencil Enclosure Systems contains the entire catalog of Middle Atlantic enclosures. Each shape represents an entire family of components. Every shape will configure to size automatically, based on your choice of model number.

Extras Stencil The Extras stencil contains easy-to-use dimension markers and Middle Atlantic Products logos, as well as the RackTools Title frame that automatically configures to the page size on drop. The Customer Supplied shape can be used to describe any non-Middle Atlantic Product on the project.

Power Products Stencil This stencil contains the complete line of vertical and horizontal power strips. Note: the vertical power strip drawings do not accurately represent the number of out lets per strip. Please right click the shape and select “view RackTools shape data form” for a correct description.



11

Rack Accessories Stencil The Rack Accessories stencil contains the complete Middle Atlantic rack accessory product line. This includes products such as media holders, rack mount storage and blank and vented panels.

Security Consoles Stencil The Security Consoles stencil contains Security Consoles and accessories available from Middle Atlantic Products. In addition, ‘side view’ shapes are available for dimension purposes only. These shapes will not appear on any reports.



12

Studio Products Stencil The Studio Products stencil allows you to easily specify and configure furniture to your exact needs. Note: all Edit Center and MultiDesk Video products are shown in plan view (top view), to facilitate room layout. HINT: To represent actual studio layouts, drop individual desk parts on the page. Then use the rotate tool to place them at the proper angle. Once placed, use CNTRL + F to bring a selected shape forward from the others on the page.

Video Monitor Mounts Stencil The Video Monitor Mount stencil allows you to easily specify and configure video monitor mounts to your exact needs. Note: Video Monitor Mounts are not drawn to scale and are provided for placement and report purposes only.



13

Adding Products To The Drawing Page When RackTools opens, you will see a group of pre-defined stencils (product categories) on the left side of the screen. Inside these stencils reside the Master Shapes representing product families. To open a stencil, simply click on the stencil title bar. To begin your drawing, select a product family icon and drag it to the drawing page. To drag and drop a Master Shape from the Enclosure Systems stencil on the page, left mouse click on the shape, hold and then drop the shape where you want it on the blank page. Select the proper model from the drop down dialog box. If any accessories have been specified for this product, an accessory dialog box will pop up. Choose the accessories you would like to add by checking on the box, or press cancel. Enclosures, Security Consoles, and specified accessories will automatically be drawn on the plan view page, as well as the elevation view page. The product that you selected will appear on the page. Specified accessories will automatically drop on the drawing as a group. To move them after they have dropped, click on a blank spot of the page to de-select the group, then select each one individually and place them where you wish. HINT: when adding sidepanels to a rack by choosing them from the Rack Options stencil, position the master shape so the sidepanels are justified to the bottom of the rack. When you select the correct size from the pop-up list, they will draw to the correct size and snap into place automatically.

Next, decide what additional components you would like in your rack. Accessories such as blank panels can be found in the Rack Accessories stencil. Select the icon and drag it into the rack, and choose the exact model from the pop-up window. Notice that the shape glues itself to the proper rack spacing increments in the rack, and draws to the proper size. HINT: when adding accessories to a rack, position the master shape so the top of the shape is justified to the top of the rackspace desired. When you select the correct size from the pop-up list, the shape will expand downwards to the correct size as necessary.



14

Additional drawing pages may be added by inserting a page from the “Insert” menu. Note: in order for RackTools shapes to work properly, all pages must include the TitleFrame master shape. This shape is located in the Extras Stencil, and will automatically configure to the proper page dimensions on drop. When a new page is added, both elevation and plan view pages will be shown. Specifying RSH Custom Rackshelves RackTools includes the entire Middle Atlantic Products custom rackshelves measured unit library. Master shapes located in the Custom Rackshelves stencil represent the most common types of electronic components. To specify a custom rackshelf, begin by selecting the master shape that most closely resembles the unit you are specifying, and drop it on the drawing page. For example, to specify a custom RSH for a VCR, first select the Custom Rackshelves stencil. Next, drag and drop the VCR shape on to the drawing page and place it in the rack. Notice that the shape glues itself to the proper rack spacing increments in the rack. Then, select the proper manufacturer and model of the component that this rackshelf will hold. The shape and shelf will grow to the proper rack units automatically. Experiment with some of the other stencils. To remove a shape from the drawing, simply highlight it and use the Delete key. The dialog box below allows you to specify either the anodized or the textured finish. When you click “OK”, the “add accessory” dialog box will appear where you can specify the clamp option if required. HINT: when adding RSH rackshelves to a rack, position the master shape so the top of the shape is justified to the top of the rackspace desired. When you select the correct unit from the pop-up list, the shape will expand downwards to the correct size as necessary.



15

Adding a New Measured Unit to the RSH Data Base From time to time you may need to specify a component that is not included in our database. In this case you will need to measure the component (for instructions on how to properly measure a component, select the “RSH Page” from the Extras stencil and drop it on a blank page). This page can be printed out for future reference. To add a unit that to the database that you have measured yourself, first select “Add New RSH Components” from the RackTools main menu. The following dialog box will appear:

Next, select “New, and the following form will appear. Complete the form with the specific manufacturer and model information. All height, width and foot dimensions must be accurate to 1/32”; depth should be accurate to within 1/8”. MEASURE CAREFULLY - RSH units are custom made and non-returnable. Using the dimensions provided in the manufacturer’s user’s manual or specification sheet is NOT recommended. If you are unsure about the measurements, the component can be shipped via insured UPS to Middle Atlantic, where it will be measured accurately and returned.

The save button stores all the data you have entered and adds it to the RSH database, making it available for use on future projects and to the “user-supplied dimensions” report. You can also delete and edit user-created components with Add New RSH components.



16

RackTools on Drop Events When a RackTools Master Shape is dropped on a drawing, a number of preprogrammed events are triggered. First, a dialog box will pop up, asking for the desired model of the unit. You can select any model in the master data table that is linked to that particular shape.

If there are no accessories attached, the Master Shape will automatically re-configure based on the specific model you chose. If there are accessories attached, you will see the following dialog box. This box prompts you to choose from the pre-determined accessories. To add the desired accessories to the drawing, check the box next to the part number. Note: some accessories will be invisible on the drawing, but they are still associated with the master shape and will appear on reports.



17

Right Click Menu Items Right click menu items are available by right mouse clicking on any shape in the drawing. Select the desired menu item. RackTools items are listed on the bottom, under Shape Help.

View RackTools Shape Data Form The Shape Data Form gives a quick view of the properties of the Middle Atlantic shape that you have selected. These items can NOT be edited. The Summarize Accessories button totals all of the accessory items added to the Master Shape on the reports.



18

View Accessories

An accessory is any related product that you want to be included as an associated option of a Master Shape. The View Accessories menu item allows the user to View, Add or Edit any of the accessories that are linked to each Master Shape. For example, if you add an AXS rack system to a drawing, the tracks will be available as part of the system on drop. The Delete Accessory button will delete the accessory from the drawing and the database. You can use this to customize the accessory function for your own needs. The Edit Accessory button allows you to edit any chosen accessory attached to a shape.



19

Add Accessories – Advanced Users To add an accessory to a Master Shape, press the Add Accessory button. The following form will pop up:

First, select Master Table, where the data is stored. In this example, the Rack MT Power Table has been selected. Choose the part number you want to attach to the Master Shape from the drop down list. Select the correct stencil and then the proper matching shape. You will find the following items on the Add Accessory screen: • X and Y location - this defines where the shape will drop on the drawing. The default setting is 0,

which drops the shape in the middle of the Master Shape. Shapes can always be moved at a later stage in the design process.

• Recommend box - checking the Recommend box will check the Accessory Option box automatically

when you drop the Master Shape. This is a good practice when you want a particular accessory option to always be added automatically to a specific enclosure option.

• Visible - when Visible is checked, then the item will be visible on drop. If left unchecked, the item

will be part of the project and shape but will not show on your drawing. To remove an invisible item from a drawing, use the View Accessories command and uncheck the box or delete the master shape. All accessories stay with the master shape.

• Prompt - If the Prompt check box is unchecked then the accessory shape will drop automatically.



20

Get Specs From the Web This option provides an automatic link to the Middle Atlantic web site, where you can obtain the exact specifications for the highlighted product. Provided you have internet access, selecting “Get Specs From Web” will start your browser, dial your ISP, and take you directly to the specific page on the Middle Atlantic website for the product selected.

Enable Auto Accessory Feature By checking this option on the Opening screen or the Company Information screen, you can automatically link accessories to any rack shape you drag them into. If you add an accessory to any rack system with this option checked, the following dialog box will appear, asking if you want to make this a part of the permanent accessory options list:



21

Main Menu Items All RackTools Main Menu Items are available on the Main Menu under the RackTools Menu. On most systems, the Main Menu will be displayed to the left of the Window menu item

Reports Before you can generate a report from a drawing, the drawing must be saved. Good file management technique suggests a separate folder for every project. You are only required to save a project once, the program will auto-save for a subsequent changes.

The report dialog box lets you select reports as well as the page you want to report on. Four report choices are available: • Quote (retail) -- shows the list prices of each component on the drawing. • Purchase Order Request (dealer only)-- provides Dealer Net costs. This report generates a purchase

order. • Customer Supplied Dimensions -- includes RSH detail, providing component dimensions of all new

custom rackshelves needed on the project. • Non-Middle Atlantic Item Report -- details all non-Middle Atlantic Products used in the project. You can also filter reports by page. This function allows the user to create different rack systems on different pages and generate separate pricing options. Using the Visio Menu >> Insert >> Page command, the user can add and name as many pages as needed for a specific project. See the Visio user’s guide for more information on adding and editing pages. When you are ready to print your report, the printer drop down dialog box allows you to select from any printer that you have installed on your PC or network.



22

Update Via Web Update Via Web provides the ability to update RackTools with the latest custom rackshelves and other new products. To update RackTools on your computer select ‘Update Via Web’, ensure you have an active internet connection, and click on the ‘Update’ link. RackTools will then be updated with any new information. Update often – updates are continually being made to ensure that your copy of RackTools is up to date and current.

Load Cost Data (Dealer registered version only) Load Cost Data allows a dealer to generate a purchase order report from a drawing created in a RackTools program registered as a consumer version. For instance, a consumer can create a rack elevation drawing and give to a dealer to order (Visio drawing file plus database). The dealer can then open the drawing in a dealer registered version of RackTools, select “Load Cost Data” from the RackTools pull-down menu, and dealer costs will applied to the file and inserted in the appropriate reports.

RackTools Help RackTools Help is the comprehensive user’s guide found under the RackTools main menu item. RackTools Help’s easy-to-use, searchable format makes all of the information easy to access and apply.



23

Software License RACKTOOLS, by Middle Atlantic Products, Inc.

SOFTWARE LICENSE AGREEMENT DO NOT INSTALL OR USE THE SOFTWARE UNTIL YOU HAVE READ AND ACCEPTED ALL OF THE LICENSE TERMS. Permission to use the software is conditional upon your agreement with these license terms (the “License”). Installation or use of the software by you will be deemed to be acceptance of the License and will create a legally enforceable contract with Middle Atlantic Products, Inc.. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT INSTALL THE ACCOMPANYING SOFTWARE. IF YOU HAVE INSTALLED IT, PROMPTLY REMOVE ALL COPIES OF IT FROM YOUR COMPUTER. IF YOU PAID FOR THE RIGHT TO USE IT, RETURN IT IN ITS ORIGINAL CONDITION, WITH YOUR RECEIPT, TO THE POINT OF PURCHASE FOR A FULL REFUND. The installation of this program will install files necessary to operate the program onto your computer. Other system files, such as DLLs may be installed or updated and Windows registry entries will be made. Uninstalling the program will not remove all of the installed files or registry entries. As with all installations, it is recommended that you back up your hard drive before you install this program. SOFTWARE LICENSE AND LIMITED WARRANTY 1. GRANT OF LICENSE. Middle Atlantic Products, as Licensor, grants to you, the Licensee, a non-exclusive right to use a single copy of this RackTools software program in object code form (hereinafter the "SOFTWARE") in accordance with the terms contained in this License Agreement. You may not: a. modify, translate, reverse engineer, decompile, disassemble, create derivative works based on, or copy the SOFTWARE or the accompanying documentation, except to the extent, if any, that this limitation or any portion of it is expressly prohibited by applicable law and provided that you may make a single copy of the SOFTWARE for backup purposes only;

b. rent, lease or sublicense any rights in the SOFTWARE or accompanying documentation in any form to any person without the prior written consent of Middle Atlantic Products, which, if given, is subject to the transferee's consent to the terms and conditions of this License;

c. remove any proprietary notices, labels, or marks on the SOFTWARE, documentation, and containers. 2. OWNERSHIP OF SOFTWARE. Middle Atlantic Products retains the copyright, title and ownership of the SOFTWARE and the written materials regardless of the form or media in or on which the original and other copies may exist. 3. TRANSFERS. You may transfer the SOFTWARE from one of your computers to another computer or person provided that the SOFTWARE is transferred without modification and, if the SOFTWARE is transferred to another person, that person agrees to be bound by the terms of this License. You must notify Middle Atlantic Products, Inc. of any transfer to any other person. 4. TERM. The license granted under this License commences upon the installation of the SOFTWARE after acceptance of the terms of this License and is effective until terminated as provided herein. You may terminate this License at any time by destroying all copies of the SOFTWARE or by returning them to Middle Atlantic Products. Middle Atlantic Products may terminate this License if you fail to comply with any of the terms and conditions of this License Agreement. Upon such termination, you agree to destroy or return the original and all copies of the SOFTWARE. . 5. US GOVERNMENT RIGHTS. The SOFTWARE is commercial computer software developed exclusively at private expense, and in all respects is proprietary data belonging to Middle Atlantic Products or its suppliers. (a) Department of Defense End Users. If the SOFTWARE is acquired by or on behalf of agencies or units of the Department of Defense (DoD), then, pursuant to DoD FAR Supplement Section 227.7202 and its successors (48 C.F.R. 227.7202) the Government's right to use, reproduce or disclose the SOFTWARE is subject to the restrictions of this Agreement. (b) Civilian Agency End Users. If the SOFTWARE is acquired by or on behalf of civilian agencies of the U.S. Government, then, pursuant to FAR Section 12.212 and its successors (47 C.F.R. 12.212), the Government's right to use, reproduce or disclose the SOFTWARE is subject to the restrictions of this Agreement. 6. LIMITED WARRANTY. Middle Atlantic Products warrants the media on which the SOFTWARE is furnished to be free of defects in material and workmanship, under normal use, for a period of ninety (90) days following the date of delivery to you. In the event of defects, Middle Atlantic Products’ sole liability shall be to replace the defective media which has been returned to Middle Atlantic Products or the supplier. THE ABOVE IS THE ONLY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, THAT IS MADE BY MIDDLE ATLANTIC PRODUCTS, ON THIS RACKTOOLS PRODUCT. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY MIDDLE ATLANTIC PRODUCTS, ITS DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 7. THE SOFTWARE AND ACCOMPANYING DOCUMENTATION (INCLUDING INSTRUCTIONS FOR USE) ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND EXCEPT FOR THE EXPRESS MEDIA WARRANTY IN SECTION 6 ABOVE. FURTHER, MIDDLE ATLANTIC PRODUCTS DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE, OR THE RESULTS OF USE, OF THE SOFTWARE OR DOCUMENTATION IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. YOU ACKNOWLEDGE THAT YOU WILL USE THE SOFTWARE FOR COMMERCIAL BUSINESS PURPOSES AND AT YOUR OWN RISK. 8. NEITHER MIDDLE ATLANTIC PRODUCTS NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT EVEN IF DIGITAL TOOLS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 10. Should any other warranties be found to exist, such warranties shall be limited in duration to ninety (90) days following the date of delivery to you. In no event will Middle Atlantic Products’ liability for any damages to you or any other person exceed the amount paid, if any, for the license to use the SOFTWARE. 11. This License shall be governed and construed in accordance with the laws of the State of New Jersey and shall be binding on and inure to the benefit of Middle Atlantic Products, its successors and assigns.

Documents

RackTools User Guide v 2.5