PL ASTMO.DK

RAIN GUTTERS

COMPLETE RANGE OF PLASTIC RAIN GUTTERS

Plastmo A/S is the market leader in Denmark in solutions for the management of rainwater, including rain gutters, drains, water collectors and light roofing solutions.The company is part of the Plastmo Nordic division, which operates in Denmark, Norway, Sweden, Finland and Poland, with an annual turnover of approximately DKK 250 million and 100 employees.Plastmo A/S was established in 1958. The company has its head offices and production facilities in Ringst-ed and it is owned by the international ACO Group, which has an annual turnover of DKK 5.3 billion and is the world leader in line drainage.

ABOUT PLASTMO

2

Scandinavian design and quality

TIGHT JOINS AND SIMPLE ASSEMBLY WITH GLUEAll parts in our rain gutter system are bonded to-gether to get unobtrusive and tight joins. After five decades spent with home owners in the Nordic countries, the glue has demonstrated its strength, and is still holding up. You can use glue for all ma-terials. At the same time it is simple and quick to install the rain gutters and it provides you with extra security that you will achieve a good result.

QUALITY Plastmo has produced rain gutters for the Nordic climate for more than 50 years. The result is a complete range of durable and simple solutions that provide you with some unique benefits. Regardless of whether you are building new con-struction or renovating.

3

Plastmo Plastic Rain Gutters have proven their

strength for more than half a century. Plastic is

not affected by airborne pollution and salty air in

coastal areas. They are strong and stable and

will last for many years to come.

4

PLASTIC RAIN GUTTERSPLASTMO

CHOSE BETWEEN SEVERAL COLORS

White Gray Graphite Brown Black

25YEARWARRANTY

THE ENVIRONMENTPlastmo Plastic Rain Gutters do not contain any plasticizers or heavy metals that are harmful to the environment.

A PIECE OF GOOD ADVICEPlace one side of your ladder against a gutter bracket when you install or clean a rain gutter for fallen leaves. This prevents damage to the plastic rain gutter that over the years might have become less flexible.

MATERIALPlastic rain gutters are manufactured from reusable un-leaded hard polyvinyl chloride that does not contain any form of plasticizers. Plastic does not corrode or rust, and will not combine with other materials. Plastic can the-refore be used for all types of roofing. The special Plast-mo glue combines with the plastic rain gutter so that the glued join becomes extra strong and stable.

WEATHER AND CLIMATEPlastic can withstand extremely low temperatures and severe stress from ice and snow without the risk of freeze cracks. Plastic is also not affected by airborne pollution or salty air. You can therefore use plastic, re-gardless of where you live.

RANGERain Gutters are available in sizes 10, 11 and 12.Downspouts are available in diameters of 75, 90 and 110 mm. See our complete range listed in the table in the back of this booklet.In addition you can order virtually any design you may de-sire as special plastic fittings parts.

SUPPLY AND STORAGERain gutters and pipes are usually delivered with a stra-pex-tape, which you must remove as soon as possible. Ne-ver store packaged rain gutters and pipes in direct sunlight.

25-YEAR WARRANTYWe provide a 25-year guarantee on plastic rain gutters. You are covered against manufacturing and material defects that cause leakage. The warranty does not cover any form of consequential damage such as operating damage.

5

FACTS

Product Illustration Comments

1 Rain gutter Available in lengths of 3 and 6 m.

2 Connector To join rain gutters. Remember connectors for corners if necessary.

3 SpoutTransitions between rain gutters and downspouts. Remember a downspout connector sleeve if necessary.

4 Expansion spout Remember a downspout connector sleeve if necessary.

5 End plate Fits both ends of the rain gutter.

6 Exterior corner 90° With integrated connector.

7 Interior corner 90° With integrated connector.

8 Plastic mounting bracket Used with vertical fascia board. Distribute with max. 600 mm spacing.

9 Triangle wedge 18° and 27° Used with slanted fascia board or roof lath.

10 Metal mounting bracket Used with vertical fascia board or roof lath.

11 Metal mounting bracket 20° Used with slanted fascia board or roof lath.

12 Metal mounting bracket 27° Used with slanted fascia board or roof lath.

13 Metal rain gutter bracket short Shaft length 190 mm.

14 Metal rain gutter bracket long Shaft length 315 mm.

14a Screws Mounting screws for metal mounting brackets and metal rain gutter brackets.

17 Downspouts Available in lengths of 3 m. Remember a downspout connector sleeve if necessary.

18 Elbow2 elbows are always used. Remember to calculate a little extra downspout to insert between the elbows. With sleeve and tip.

19 Downspout connector sleeveUsed for joining downspouts and where the downspout is mounted directly on the spout.

20 Junction Used for shared downflow from multiple systems.

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5641001

7AColli

x 1011 90°

125 90°

SizeSteel Plus

5702756

4100145

702756410014

5702756

4100145

702756410014

5702756

4100145

702756410014

5702756

410014

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

6

RANGEOUR STANDARD PROGRAM COVERS MOST NEEDS

Product Illustration Comments

21 Down conductor Used as transition from downspouts to the sewer.

22 Expeller Used where the downspout is not connected to the sewer.

23 Well collar 150 mm. diameter For cement sewage pipes.

24 Well collar 130 mm. diameter For PVC sewage pipe sleeve.

25 Clamp for plastic pipe Screws into the masonry/wall. 2 per pack.

26 Hinge-pin for wallHammers into the wall. Galvanised. To be fitted with a spacing of approximately 2 m.

27 Hinge-pin for woodScrews into the masonry/wall. Galvanised or copper. To be fitted with a spacing of approximately 2 m.

28 Rain gutter glue 150 ml Used for plastic rain gutters.

29 Metal rain gutter bracket bender For adapting metal rain gutter brackets to the slope of the roof.

32 Interior and exterior corner 45° For all materials and sizes, 2 connector pieces are used per corner.

33 Adjustable spoutTransitions between rain gutters and downspouts. Is bonded at an angle as required (0 – 75°).

34 Expansion piece without flow See application in the table. See application in the table.

34a Expansion piece with flow See application in the table.

35 Foliage collector For mounting in the spout.

36 Water outlet w. flexible hose For connecting to a barrel. Used for collecting rain water. 75 mm.

37 Water exhaust w. flap Used for collecting rain water.

38 Foliage collector w. pipe connectionIs mounted directly on the 110 mm pipe. Can be adapted to 75 and 90 mm pipes by using a pipe connection.

39 Base edge C135 105°Creates the transition between the eaves and the rain gutter. Available in lengths of 2 m in grey, white and graphite. Fits all roof boarding and rain gutter materials.

40 Base edge C55 125°Creates the transition between the eaves and the rain gutter. Available in lengths of 2 m in grey, white and graphite. Fits all roof boarding and rain gutter materials.

44 Adjustable bracket For mounting bracket in size 10, 11 and 12.

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

7

tagrendetakrennetakränneer ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmoSverige Tel. 04

0-18 01

OUR STANDARD PROGRAM COVERS MOST NEEDS

1 43

4

17

18

19

20

21

8

9

10

12

35

13

14

15

16

44

11

25

26

27

23 382422

2

6

7

5

3

37

36

39

40

8

RANGE

System sizes are adapted to different types of houses. A size 10 rain gutter is mounted on small buildings such as summer houses and roofing over terraces and conservatories.

A size 11 is used for traditional houses and size 12 is mounted on large buildings, such as tenements as well as warehouses and industrial premises. In order to ensure that you have sufficient drainage capacity, you should use the following calculations as your starting point.

Check the drainage capacity In the table you can gauge the system’s drainage capacity in relation to the location of the downspout. If the drainage area is greater than the figures in the table, you can choose to install an additional downspout, since that increases drainage capacity.

Make sure you plan drainage for all downspouts.

SYSTEM

A

B

Drainage Area

H

B

Planning of your system First calculate the roof area (drainage area: A X B), and determine the location of the downspout.

FIND THE RIGHT SYSTEM

Pipe sizesRain gutter size

Plastic grey, white, graphite, brown, black

Ø75 Ø90 Ø110

10 • •11 • • •12 • • •

The rain gutter sizes in the above examples can be combined with the following variable dimensions of the downspouts:

Measurement Table for Rain Gutters

Size Width Height

10 102 6411 120 7212 144 87

Is there a need for an expansion spout/expansion piece?Plastic will move slightly when the temperature varies.One should therefore in the following cases use an expansion spout and/or an expansion piece:

Expansion piece Expansion piece without flow with flow Expansion Spout

If the rain gutter is more than 18 m, expansion spouts should always be installed at all downflows.

If there is a rain gutter all the way around the build-ing, expansion spouts are always installed at all downflows.

If the distance between downflows is more than 18 m, al-ways install an expansion piece between the downflows.

If the distance between downflows is more than 8 m be-tween two miter joints, always install an expansion piece between the corners.

tagrende takrenne takrä�nne er ikoisliPlastm ontage D anmar k Tlf.

astmo Norge Tl f. 02 5 2 34

tmo Sverige Tel. 040-18 01

Plastic rain gutters more than 18 meters in length

Plastic rain gutters all the way around the house

The above is calculated on the basis of expected rainfall intensity of 0,0146 l/s/m2.

Rain Gutters Pipes

Rain Gutters Drainage area (m2) Drainage area (m2) 10 11 12 Ø75 Ø90 Ø110

Location A 128 200 295 180 289 530

Location B 85 128 195 150 235 408

Location C 64 95 148 126 200 365

Location C

Location B

Location A

Downspouts

9

NOTES

NOTES

DER FALDER MERE OG MERE NEDBØR …– IN SCANDINAVIAN QUALITY AND DESIGN

PLASTMO RAIN GUTTERS

Vnr.:

008

9002

00

1818

14 n

ov18

PL ASTMO.DKPlastmo A/S | Odinsvej 9-11 | DK-4100 Ringsted | CVR-nr.: 33 05 16 62 | info@plastmo.dk | T: +45 57 66 66 66