RAMPING RIDE FOLD-AWAY LIFT

RPH Series 2500 / 3300 lbs

APPLICATION

The RPH Series is a mid size lift designed to handle

a variety of operator’s needs. Dual lift cylinders

provide great support & stability. The RPH can fit

both lower bed height intercity trucks and larger dock

height trucks.

The 50” x 85” wide platform is large enough to

handle pallet jacks, wheeled carts or bulky loads.

The RPH is the cost effective bridge between the

smaller platform half-dip ride models and the large

platform premium level ride models.

Dual lift cylinders for great load stability

Fully galvanized finish - STANDARD

Half-dip ride platform (St/Al or Al/Al)

Power down - STANDARD

Self-locking valves on all cylinders

Heavy duty bed extension and side steps

www.dhollandia.com

www.dhollandia.com

STANDARD FEATURES MAIN OPTIONS

• Cab shutoff switch with harness (on/off only)

• 102" widening blocks to extend the bed extension

• Flexible side steps with 12" rubber dock bumper

• 2-button handheld remote on spiral cable

• Dual spring loaded cart stops

• 3-Piece under ride guard

• Cycle counter for hydraulic power pack

• Short 19" single side step

• Lightweight full aluminum platform

• Walk ramp kit (verify bed height w/ DHOLLANDIA)

REQUIRES MIN. 43” FLOOR HEIGHT

• Galvanized finish on steel components

• Power-down operation

• Full length ground and power cables

• Self-locking valves on the cylinder, with a manual

override function

• Cylinder with piston rods in hard-chromed

stainless steel

• Sealed weather-proof pump unit with thermo-

protected electromotor

• Heavy duty bed extension and side steps (fits 96”

or 102” wide body)

• Low-maintenance bushings & zerks in pivot points

• 250 amp inline mega fuse circuit protection

Heavy duty bed extension & side steps Self-lock valves with manual override 1/2 Steel 1/2 Alu. platform (optional)

Weights include the DHOLLANDIA bed extensions and side steps

DHOLLANDIA US Inc. ● 270 Southridge Parkway, Bessemer City, NC 28016 ● sales.USA@dhollandia.com

Toll free (855) 856-8225 ● Tel: (909) 251-7979 ● Fax: (909) 357-1554

Capacity lbs Platform Size Floor Height Floor to Tube Lift Overhang Approx. Weight

2500 St/Al or Full Alu 50” x 85” 39” - 51” 16” - 25” 34” - 42” 1100 / 960 lbs.

3300 St/Al or Full Alu 50” x 85” 39” - 51” 16” - 25” 34” - 42” 1100 / 960 lbs.

www.anjerinc.com 800-326-5373 sales@anjerinc.com