Upload
swathi-vachakarla
View
217
Download
0
Embed Size (px)
Citation preview
8/8/2019 Reading CAM Data
1/19
Reading CAM data using the Z4CU tool
Once data from the screen is captured, they are stored in request context objects,
which in turn are transferred to the business objects, which get updated into the
CAM.
The CAM consists ofRecovery Table and Hold Table.
Recovery Table: This table consists of data that navigate till theUnderwriter Screen.
Hold Table: Data once submitted to the UnderWriter for further inquiry,get updated into the Hold table.
In order to view the data entered in the screen at any point of navigation just afterdata entry, the Z4CU tool is being used.
However, note that the Z4CU tool can be used during process navigation only
that is, the transaction must be in process, from where the data are captured.
Given below are the steps to be followed to view the CAM data after enteringinformation in the Dwelling Information page.
STEP 1: In the dwelling information page, after entering all the necessary fields,
note down the House hold number (Marked in Red) and the Trans time(Marked in
Blue) from the bottom of the page.
8/8/2019 Reading CAM Data
2/19
STEP 2: Logon using your mainframe id in the corresponding region. (TSJ1)
in this case.
When you have successfully completed logging in, go to the Z4CU
screen by just typing Z4CU in the space provided.
Trans Time
2007-01-10-07.09.05.045256
HouseholdNumber
0232355750
8/8/2019 Reading CAM Data
3/19
8/8/2019 Reading CAM Data
4/19
STEP 3: This is the Z4CU screen. The various fields that have to be entered
are:
CD(CAMObject)(Optional)
HOUSEHOLD-NUM
TIMESTAMP
LOB (Line Of Business) F in this case.
CREATE FROM (That is, the table from which we are viewing the
data SDT0 { Shared Data Table} in this case)
Some of the various CAM objects are as follows:
Business Objects CAM objects
FPLCY-SOI-CVG PLA48
FPLCY-SOI-CVG-DTS PLA49
FPLCY PLA45
FPLCY-FS-ORDER PLA46
FPLCY-MAIL-ADDR PLA47
8/8/2019 Reading CAM Data
5/19
FPLCY-SOI-CVG-MSG PLA50
FPROP-LOCATION GEA25
FJET-SKI-TRLR SIA29
FPLCY-SOI-RI-ELIG PLA51
FPLCY-UW-RESP PLA52
FPLCY-ENDORS PLA54 FPLCY-FS-NAME PLA55
FPLCY-CLNT PLA56
FPLCY-ENDORS-P PLA57
FPLCY-ENDORS-DESC PLA58
FPLCY-SOI-CVG-TX PLA59
MPLCY PLA60
LPLCY PLA61
CPLCY PLA62
FPLCY-BT-ID PLA63
FAGENT-REMARK PLA64 FRENEWAL-EXCPTION PLA67
FPLCY-AGENT-CHNG PLA72
FPLCY-TRAN-RESULT PLA73
FPLCY-DIS-SUR-CTL PLA75
FPLCY-CATMIT PLA81
FPLCY-DEPENDENT PLA82
FPLCY-MANUAL-ADJ PLA83
FPROP-CLNT-INFO NDA90
FPROP-STRUCTURE SIA34
FPCN-TRIG-DOC-REF PMA96
8/8/2019 Reading CAM Data
6/19
STEP 4: Note that there is a small correction that has to be made in the Transtime in the screen. The last 4 digits have to be changed to 9696(As marked in
Lavender).
8/8/2019 Reading CAM Data
7/19
STEP 5: When you hit Enter after filling all the above mentionedinformation, you will be navigated to the screen containing the data in the
corresponding CAM object.
8/8/2019 Reading CAM Data
8/19
8/8/2019 Reading CAM Data
9/19
F3
Reading CAM data using P302 screen:
8/8/2019 Reading CAM Data
10/19
Once we submit or suspend the transaction, we can check the CAM
values from P302 screen.
8/8/2019 Reading CAM Data
11/19
8/8/2019 Reading CAM Data
12/19
8/8/2019 Reading CAM Data
13/19
8/8/2019 Reading CAM Data
14/19
8/8/2019 Reading CAM Data
15/19
8/8/2019 Reading CAM Data
16/19
8/8/2019 Reading CAM Data
17/19
8/8/2019 Reading CAM Data
18/19
8/8/2019 Reading CAM Data
19/19