1
Rejuvenata TM Active is a powerful, concentrated cleaner recommended by The Marble Man for regular and heavy duty cleaning of indoor natural and engineered stone benchtops and stone tile floors. It can be used daily and will leave surfaces looking fresh, sparkling and streak free. Key Features Contains 3 different, natural, active enzymes that remove in-ground dirt and stains caused by food, liquids, oil, grease, mould and other organic substances; contains a small amount of penetrating sealer which tops up protection every time it is used; No rinsing with water required as this product acts as a rinsing product. Surfaces Polished and unpolished natural stone benchtops and floors such as granite, limestone, marble, slate and travertine; engineered stone surfaces such as Caesarstone, Essastone, Quantum Quartz, Silestone, Smartstone and Hanstone; porcelain, ceramic, terracotta tiles; cement pavers; masonry; grout; vinyl Tips Always test a small, inconspicuous area first to determine suitability and desired results Using too much product will leave a residue which may need to be rinsed Imperfections and streaks are more noticeable on high gloss surfaces therefore benchtops and floors must be dried with a clean towel to achieve a mirror finish Professional cleaning before using Rejuvenata TM Active for the first time is recommended to prepare the stone surface for effective regular cleaning Application Read entire label before use and shake bottle well. Benchtops Step 1 Wipe benchtop to remove excess food, oil, dust or liquid Step 2 Mix 1 capful of Rejuvenata TM Active with 100ml of water in a spray bottle Step 3 Spray onto the benchtop (approx. 1 spray per ½ metre 2 . Too much product will cause streaking) Step 4 Wipe the surface dry with a paper towel. DO NOT USE scourers or wet sponges Floors Step 1 Sweep or vacuum floors to remove any loose dirt, dust and debris Step 2 Mix 100mls of Rejuvenata TM Active in half a bucket of warm water (approx. 4 litres) Step 3 Use a damp, microfibre mop to clean the floor with the solution in the bucket (squeeze out excess liquid first. A damp rather than wet mop will leave fewer streaks) For more information on how to care for you stone visit our website themarbleman.com.au - call 1300 627 626 - email [email protected] 1300 627 626 Rejuvenata TM Active Product Information

RejuvenataTM Active Product Information

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: RejuvenataTM Active Product Information

RejuvenataTM Active is a powerful, concentrated cleaner recommended by The Marble Man for regular and heavy duty cleaning of indoor natural and engineered stone benchtops and stone tile floors. It can be used daily and will leave surfaces looking fresh, sparkling and streak free. Key Features Contains 3 different, natural, active enzymes that remove in-ground dirt and stains caused by food, liquids, oil, grease, mould and other organic substances; contains a small amount of penetrating sealer which tops up protection every time it is used; No rinsing with water required as this product acts as a rinsing product. Surfaces Polished and unpolished natural stone benchtops and floors such as granite, limestone, marble, slate and travertine; engineered stone surfaces such as Caesarstone, Essastone, Quantum Quartz, Silestone, Smartstone and Hanstone; porcelain, ceramic, terracotta tiles; cement pavers; masonry; grout; vinyl Tips

• Always test a small, inconspicuous area first to determine suitability and desired results • Using too much product will leave a residue which may need to be rinsed • Imperfections and streaks are more noticeable on high gloss surfaces therefore benchtops and floors

must be dried with a clean towel to achieve a mirror finish • Professional cleaning before using RejuvenataTM Active for the first time is recommended to prepare the

stone surface for effective regular cleaning Application Read entire label before use and shake bottle well. Benchtops Step 1 Wipe benchtop to remove excess food, oil, dust or liquid Step 2 Mix 1 capful of RejuvenataTM Active with 100ml of water in a spray bottle Step 3 Spray onto the benchtop (approx. 1 spray per ½ metre2. Too much product will cause streaking) Step 4 Wipe the surface dry with a paper towel. DO NOT USE scourers or wet sponges Floors Step 1 Sweep or vacuum floors to remove any loose dirt, dust and debris Step 2 Mix 100mls of RejuvenataTM Active in half a bucket of warm water (approx. 4 litres) Step 3 Use a damp, microfibre mop to clean the floor with the solution in the bucket (squeeze out

excess liquid first. A damp rather than wet mop will leave fewer streaks) For more information on how to care for you stone

visit our website themarbleman.com.au - call 1300 627 626 - email [email protected]

1300 627 626

RejuvenataTM Active Product Information