Analyzer Update

July 2015

Release Notes

Actix Analyzer Update July 2015 2

1 In this version

This release contains support for new and updated file formats. There are updates for most technologies that Actix supports, with changes falling under the following categories:

New collection devices and improvements:

Added support for SeeHawk version 3.2

Added support for JDSU 19.1

Added support for Wi-Fi in JDSU

Added support for devices Samsung S5 G900GV, Sony M35T, Huawei E398u-18 devices in Ding Li file format

Application Layer

None

Platform improvements:

Added support for Windows 10.

Fixed a problem where the Expression Debugger could not be launched from the Event Diagram Viewer.

Fixed an issue where newly added TAB layers would not show up in other instances of the Map.

Fixed the issue of flickering data tool tips, when the pointer was hovered over charts.

Actix Analyzer Update July 2015 3

2 New collection device or technology support

2.1 Accuver Support

Resolved a problem that reported ARFCNs only from a single band for the attributes ScanSortSigLevel_by_SigLevel and ScanSortChannelNo_by_SigLevel in multiband log files.

Added support to decode message LTE ML1 paging DRX request" version 2 and message LTE LL1 PUCCH CSF log version 24 for Samsung Core Prime devices. The attributes LTE_UE_RI, LTE_UE_WideBand_CQI_Cwd0 and LTE_UE_WideBand_CQI_Cwd1are also set.

Resolved an issue preventing loading of certain log files.

Resolved an issue to decode PCTel IBFlex scanner log files.

2.2 Ascom TEMS support

Added support to set attributes ServBCCH and ServBSIC from MPH (dedicated) message for the truncated GSM calls. These attributes were previously missing in such scenarios.

2.3 DataPro support

Fixed the issue of allocating inconsistent device or stream names.

Added Support to decode LTE LL1 PUSCH CSF message.

Resolved the issue of missing data for a few UEs in multiple UE log files.

Resolved the issue that caused incorrect time stamps and subsequently unexpected VoLTE drop events.

2.4 Ding Li support

Resolved the issue of attribute Event_Test_Marker showing unknown test for application types in valid application test starts.

Added support for Samsung S5 G9006V devices.

Corrected the incorrect reporting of attribute Ping_Address (IP_address of Ping).

Added support to decode GPS coordinates from Ding Li SCOUT tool.

Added support for Sony M35T devices.

Added support for Huawei E398u-18 devices.

Actix Analyzer Update July 2015 4

2.5 Hugeland support

Added support to decode Ping_RTT.

2.6 JDSU support

Added support for JDSU 19.1.

Added support for Wi-Fi.

2.7 Nemo support

Resolved an issue that erroneously triggered RRC connection drop event at successful LTE to UMTS handovers.

Resolved an issue where the workspace filter was greyed out for a log file.

Resolved an issue that caused Analyzer not to load some files.

2.8 PCTEL support

Added support for SeeHawk v3.2 (file format version 1.0.0.11).

2.9 Qualcomm support

Resolved an issue that caused some missing carrier aggregation attributes when TTI preference was enabled.

2.10 Rohde and Schwarz support

Added support to decode SIB information and set SIB related attributes.

2.11 Generic

Resolved the issue that gave incorrect values to the attribute Voice_Call_SetupTime with an Analyzer Pro-HSPA-Plus license.

Fixed an issue to map GSM voice call setup events in Voice All Tech Events group.

Corrected a problem that pegged certain successful GSM call setup events as blocked call events.

Resolved an issue to correctly decode attribute NAS_EMM_LAI_LAC from LTE EMM messages.

Actix Analyzer Update July 2015 5

Resolved an issue that reported LTE RRC connections drops incorrectly at the detach procedure.

Resolved an issue where successful SRVCC to GSM was reported incorrectly as LTE RRC connection drops.

Resolved an issue where successful conclusion of VoLTE calls were reported as VoLTE call drops.

Actix Analyzer Update July 2015 6

3 Application layer improvements

3.1 General

Resolved an issue where Radio Network Analysis (RNA) module does not display LTE_Scan_RSRQ/RSRP_For_SectorHandle bins

Actix Analyzer Update July 2015 7

4 Platform improvements

4.1 General

Added support for Windows 10.

4.2 Event Diagram Viewer

Fixed a problem where the Expression Debugger could not be launched from the Event Diagram Viewer.

4.3 Map

Fixed an issue where newly added TAB layers would not show up in other instances of the Map.

4.4 Stateform

Fixed the issue of flickering data tool tips, when the pointer was hovered over charts.

5 Documentation

None

6 Known Issues / Obsolescence

None

Actix Analyzer Update July 2015 8

The content of this manual is provided for information only, is subject to change without notice, and should not be construed as a commitment by Actix. Actix assumes no responsibility or liability for any errors or inaccuracies that appear in this documentation.

The product is protected under national and international copyright, trademark and trade secret, patent and other intellectual property laws and treaties. The product is covered by at least one or more of the following U.S. patents:8,364,141; 7,653,395; 8,032,131; 7,941,136; 8,150,417; 7,881,319; 7,830,812; 7,904,080; 7,839,846; 7,062,264; 7,349,692; 7,224,968; 7,792,032; 7,634,267; 7,353,160; 8,428,171; 7,877,095; 7,768,968; 8,855,675; Sweden Patent: 524414; Great Britain Patents: 2,461,242; 2,467,474; 2,196,050; 1,759,549; 1,716,668; 1,678,972; 2,382,502; 2,384,663; 2,404,314; 1,606,965; Australia Patent: 2003301796; Patents registered in China P.R.: 1,934,882; ZL200480007621.7; CN1817056; Patents registered with the European Patent Office: EP1604278; EP1559289; French Patents: 2,196,050; 1,759,549; 1,716,668; 1,678,972; 1,468,542; 1,606,965; German Patents: 2,196,050; 1,759,549; 1,716,668; 1,678,972; 1,468,542; 102004002145; 103 07 408; 102 51 993.5; 101 04 926; Holland Patent: 2,196,050; India Patent: 1130/CHENP/2005; Italian Patent: 2,196,050; Patents registered in Japan: 4,499,746; 4,452,710; JP549116/2004; JP5139462; Patents registered in Korea: 10-11-21435; 10-09-39132; New Zealand Patent: NZ540378; Patents registered in Spain: 2,196,050;1,606,965; and pending patents.

Copyright Actix 2015. All rights reserved. All trademarks are hereby acknowledged.

US: T +1 703 707 4777 F +1 703 707 4778

AE T +971 (0) 44461403 F +971 (0) 4495406

AU T +61 3 9225 5042

BR T +55 (11) 2246 2700 F +55 (11) 2246 2799

CN: T +86 10 6310 2386 F +86 10 6310 7786

DE: T +49 351 40429-0 F +49 351 40429-50

T +49 351 40429-0 F +49 351 40429-50

HK: T +852 2295 6677 F +852 2295 6687

JP: T +81 3 4578 3322

F +81 3 4578 3328

SG: T +65 6333 7428 F +65 6333 5540

UK: T +44 (0)20 8735 6300 F +44 (0)20 8735 6301

Support +44 (0)20 8735 6303

1 In this version2 New collection device or technology support2.1 Accuver Support2.2 Ascom TEMS support2.3 DataPro support2.4 Ding Li support2.5 Hugeland support2.6 JDSU support2.7 Nemo support2.8 PCTEL support2.9 Qualcomm support2.10 Rohde and Schwarz support2.11 Generic

3 Application layer improvements3.1 General

4 Platform improvements4.1 General4.2 Event Diagram Viewer4.3 Map4.4 Stateform

5 Documentation6 Known Issues / Obsolescence