Renishaw Product Catalog Issue15

.... ?, ,..

RENI§HAW~apply innovalion'·

C-C

ON, INC.

C-CON, INC. - (972) 726-7002 - WWW.C-CONINC.COM

1

Tabl

e of

con

tent

s

Table of contentsSection 1 – Coordinate measuring machine probesFixed and manual probe heads .......................1-2PH1 ......................................................................................... 1-2PH5 ......................................................................................... 1-2PH5/1 ...................................................................................... 1-2PH6 ......................................................................................... 1-3PH6A ...................................................................................... 1-3PH6M ...................................................................................... 1-3MH8 ........................................................................................ 1-3MIH ......................................................................................... 1-4MIH-S ..................................................................................... 1-4MIH-SI interface unit ............................................................... 1-4MH20 ...................................................................................... 1-5MH20i ..................................................................................... 1-6RTP20 .................................................................................... 1-7

Motorized probe heads ....................................1-9PH10T .................................................................................... 1-9PH10M .................................................................................... 1-9PH10MQ ................................................................................. 1-9Motorized probe head accessories....................................... 1-10REVO™ ................................................................................ 1-11

Touch probes ..................................................1-14TP1S/TP1SM ........................................................................ 1-14TP20/TP20 NI modular probes ............................................. 1-15TP20 accessories ................................................................. 1-18MCR20 ................................................................................. 1-19TP2 5-way............................................................................. 1-20TP6/TP6A ............................................................................. 1-20TP7M .................................................................................... 1-21TP7M EP .............................................................................. 1-21TP200/TP200B modular probes ........................................... 1-22TP200 accessories ............................................................... 1-23SCR200 ................................................................................ 1-24

Special probing systems ...............................1-25SP25 ..................................................................................... 1-25FCR25 .................................................................................. 1-28SP80 ..................................................................................... 1-29SP80H .................................................................................. 1-30SP600M ................................................................................ 1-32SP600Q ................................................................................ 1-32SCR600 stylus changing rack .............................................. 1-32

Gram gage .......................................................1-33

CMM probe shanks .........................................1-34

CMM cables .....................................................1-37Manual probe head cables ................................................... 1-37Motorized probe head cables ............................................... 1-37Machine cables ..................................................................... 1-37Output cables ....................................................................... 1-37Multiwired cables .................................................................. 1-37Adaptor/extension cables ..................................................... 1-38PICS interconnection cables ................................................ 1-38

Extensions ......................................................1-39Extension bars ...................................................................... 1-39Knuckle joint ......................................................................... 1-39Autojoint extension bars ...................................................... 1-39

Interfaces .........................................................1-40PI4-2 ..................................................................................... 1-40PI6 ....................................................................................... 1-40PI7-2 ..................................................................................... 1-40PI200 .................................................................................... 1-41

IS1-2 ..................................................................................... 1-41Interface accessories ............................................................ 1-41

Mounting brackets ..........................................1-42

Autochange system .......................................1-44ACR1 autochange rack with adjustable base ....................... 1-44ACC2-2 autochange controller ............................................. 1-44ACR1 autochange system accessories ................................ 1-45ACR3 autochange rack ......................................................... 1-46

Manual autojoint probe stand .......................1-48

MSR1 rack .......................................................1-48

Datum sphere ..................................................1-49

Mahogany boxes .............................................1-50

Probe extension kits ......................................1-50

Stylus tools .....................................................1-51

Tool kits ...........................................................1-52

Renishaw services .........................................1-52

Section 2 – Machine tool probesInspection probes for machining centers ......2-2MP1 probe system .................................................................. 2-2MP3 probe system .................................................................. 2-7MP11 .................................................................................... 2-11MP15 .................................................................................... 2-12MP700 .................................................................................. 2-13OMP40 ................................................................................. 2-14OMP400 ............................................................................... 2-15OMP60 ................................................................................. 2-16OMP60M (special order) ...................................................... 2-17RMP60 .................................................................................. 2-18RMP60M (special order) ....................................................... 2-19RMP600 (available winter 2008/2009) .................................. 2-20CP1 contact inspection probe ............................................... 2-21Shanks/toolholders ............................................................... 2-22

Tool setting probes for machining centers ..2-23MP4 ...................................................................................... 2-23NC3 tool setter ...................................................................... 2-24NC4 tool setter ...................................................................... 2-25OTS ...................................................................................... 2-27TRS2 .................................................................................... 2-28TS27R .................................................................................. 2-29

Inspection probes for turning centers ..........2-30LP2/LTO3T, LP2/LTO2T and LP2/LTO2S .............................. 2-30LP2 probe ............................................................................. 2-32MP250 (available winter 2008/2009) .................................... 2-32LP2H probe .......................................................................... 2-33LP2DD probe ........................................................................ 2-33LP2/LP2DD replacement parts ............................................. 2-34LP2 accessories ................................................................... 2-35

Tool setting for turning centers .....................2-36High precision removable arm (HPRA)................................. 2-36High precision pull-down arm (HPPA) .................................. 2-38High precision motorized arm (HPMA) ................................. 2-38RP1, RP2 and RP3 tool setting probes ................................ 2-41TS20 probe for HPA .............................................................. 2-42

Table of contents.indd 1Table of contents.indd 1 30/07/2008 10:00:3030/07/2008 10:00:30

C-CON, INC. - (972) 726-7002 WWW.C-CONINC.COM

C-C

ON, INC.

Table of contents

2

Tabl

e of

con

tent

s

Interfaces .........................................................2-43MI5 interface ......................................................................... 2-43MI8 interface ......................................................................... 2-43MI12 interface ....................................................................... 2-43NCi-4 interface ...................................................................... 2-43OMI, OMI-2 and OMI-2T interfaces ...................................... 2-44Lathe tool setting arm interfaces .......................................... 2-44

Machine tool software ....................................2-45Macro based programming ................................................... 2-45Off-line programming ............................................................ 2-48Renishaw OMV ..................................................................... 2-49

Renishaw services .........................................2-50

Probe retrofi t questionnaire ..........................2-51

Additional retrofi t customer information ......2-53

Section 3 – Performance measurement and calibration systemsXL laser calibration system .............................3-2XL laser system components ................................................. 3-3Base system kit ...................................................................... 3-6Linear system kit ..................................................................... 3-6Linear/angular system kit ........................................................ 3-6Advanced system kit ............................................................... 3-6

Optics ................................................................3-7Linear kit (standard 40 m) ....................................................... 3-7Small linear accessory kit ....................................................... 3-7Long range linear optics kit (80 m max) ................................. 3-7Angular kit ............................................................................... 3-7Angular kit – High accuracy (0.2%) ........................................ 3-7Linear/angular combination kit ................................................ 3-7Straightness measurement kits .............................................. 3-8Straightness accessory kit ...................................................... 3-8Squareness measurement ..................................................... 3-8Flatness measurement kit ...................................................... 3-8Standard optics mounting kit .................................................. 3-8Magnetic base ........................................................................ 3-8CMM optics mounting kit ........................................................ 3-9Beam steerer LS350 ............................................................... 3-9Swivel mirror ........................................................................... 3-9Fixed turning mirror ................................................................ 3-9Quarter wave plate ................................................................. 3-9HP optic adaptor plate ............................................................ 3-9Straightness shutter ................................................................ 3-9

Tripod and cases ............................................3-10Universal tripod .................................................................... 3-10XL translation stage .............................................................. 3-10Tripod adaptor....................................................................... 3-10Tripod converter ML-XL ........................................................ 3-10Magnetic base adaptor ......................................................... 3-10Universal tripod case ............................................................ 3-10

System cases ..................................................3-10Base system case ................................................................ 3-10Full system case ................................................................... 3-10

Software ..........................................................3-11LaserXL™ calibration software ............................................ 3-11QuickView XL software ......................................................... 3-11

RX10 rotary calibrator ....................................3-12High accuracy RX10 ............................................................. 3-12Lifting table accessory kit ..................................................... 3-12

Spare parts ......................................................3-13Clamp block .......................................................................... 3-13Locking screw assembly ....................................................... 3-13

Locking screw pressure pad ................................................. 3-13Clamp screws ....................................................................... 3-13Mounting pillar ...................................................................... 3-13Straightness accessory base ............................................... 3-13Large retrorefl ector ............................................................... 3-13M8 adaptor ........................................................................... 3-13Alignment target ................................................................... 3-14Linear beam splitter .............................................................. 3-14Linear refl ector ...................................................................... 3-14Angular refl ector ................................................................... 3-14Angular beam splitter ............................................................ 3-14

Cables ..............................................................3-15USB single port extension cable (5 m) ................................. 3-15USB dual port extension cable (5 m) .................................... 3-15XC80 temperature sensor cable (5 m) ................................. 3-15RS232 cable kit for linear correction software ...................... 3-15RX10 interface cable ............................................................ 3-15RX10 RS232 data cable ....................................................... 3-15Mahr-Federal 832 amplifi er interface cable .......................... 3-15TB10 to XL80 TPin cable ...................................................... 3-15

ML10 laser calibration system components ....................................................3-16DX10 interface kit (USB) ...................................................... 3-16Cables .................................................................................. 3-16Renishaw supercase ............................................................ 3-17Two-wheeled cart ................................................................. 3-17Remote trigger switch ........................................................... 3-17ML10 translation stage ......................................................... 3-17HP/Renishaw tripod adaptor ................................................. 3-17Universal tripod adaptor for ML10 ........................................ 3-17Material temperature sensor ................................................. 3-17Air temperature sensor ......................................................... 3-17

Ballbar systems ..............................................3-18QC10 ballbar kit – standard .................................................. 3-18QC10 ballbar kit – comprehensive ....................................... 3-18QC10 ballbar kit – basic ....................................................... 3-18Printed QC10 user guide ...................................................... 3-18Ballbar 5 HPS software upgrade .......................................... 3-18Z-axis accessory kit .............................................................. 3-19Small circle accessory kit ..................................................... 3-19VTL adaptor kit ..................................................................... 3-19USB to serial adaptor ........................................................... 3-19QC10 ballbar kit spare parts ................................................. 3-20

Machine checking gage .................................3-21MCG1 – small kit .................................................................. 3-21MCG2 – large kit ................................................................... 3-21MCG spares and accessories .............................................. 3-21

Training ............................................................3-22Learning practical laser interferometry ................................. 3-22Using and understanding the QC10 ballbar and machine

metrology ....................................................................... 3-22

Section 4 – Non-contact position encodersNEW encoder system ........................4-4

RELM high-accuracy linear encoders ............................................................4-6

RELM technical information.................................... 4-7 RELM high-accuracy linear encoder range ............ 4-8 RELM applications .................................................. 4-9 RSLM high-accuracy scale for fl at panel

applications .................................................................... 4-10



C-C

ON, INC.

3

Tabl

e of

con

tent

s

RG2 20 µm and RG4 40 µm optical linear encoders ..........................................................4-11RG2 20 µm and RG4 40 µm technical information ............... 4-12RG2 20 µm range ................................................................. 4-13RG4 40 µm range ................................................................. 4-14RG2 20 µm and RG4 40 µm applications ............................. 4-15RG2 20 µm UHV range ........................................................ 4-16

RESM and the RESR optical angle encoder ............................................................4-17Optical angle encoder performance ..................................... 4-18Optical angle encoders technical information ....................... 4-19Optical angle encoder range ................................................ 4-20Optical angle encoder specifi cations .................................... 4-21

Si-FN with FANUC serial communications............ 4-21DSi and REXM ultra-high accuracy encoder ........................ 4-22Optical angle encoder applications ....................................... 4-23Optical encoder accessories and custom solutions.............. 4-24

Rotary magnetic encoders ............................4-25Linear magnetic encoders .................................................... 4-26

Interferometric feedback solutions ...............4-27

RLE laser interferometer systems ................4-28RLD detector units ............................................................... 4-28RLE system benefi ts ............................................................ 4-28

RLE system accessories ...............................4-29RCU10 compensation system .............................................. 4-29RPI parallel interface ............................................................ 4-29

Section 5 – Styli and accessoriesAccuracy at the point of contact ............................................. 5-2What is a stylus? ................................................................... 5-2What naming protocol do Renishaw use to describe their styli range? ...................................................................... 5-2Terminology ............................................................................ 5-3The range of genuine Renishaw styli ..................................... 5-3Accessories and tools............................................................. 5-5

M2 threaded stylus range ................................5-7Ruby ball styli (stainless steel stems) .................................... 5-7Ruby ball styli (tungsten carbide stems) 10 mm range ........... 5-7Ruby ball styli (tungsten carbide stems) 20 mm range ........... 5-7Ruby ball styli (tungsten carbide stems) 30 mm range ........... 5-8Ruby ball styli (ceramic stems) 30 mm range ......................... 5-8Ruby ball styli (carbon fi ber stems) 30 mm – 40 mm range ... 5-8Ruby ball styli (tungsten carbide stems) 40 mm range ........... 5-9Ruby ball styli (tungsten carbide stems) 50 mm range ........... 5-9Ruby ball styli (ceramic stems) 50 mm range ......................... 5-9Ruby ball styli (carbon fi ber stems) 50 mm range .................. 5-9Ruby ball styli (carbon fi ber stems) 75 mm range ................ 5-10Ruby ball styli (carbon fi ber stems) 100 mm range .............. 5-10Star styli (fi xed) .................................................................... 5-10Star stylus centers ............................................................... 5-11Disc styli ............................................................................... 5-11Cylinder styli ......................................................................... 5-11Parallel hemispherical-ended styli (tungsten carbide) .......... 5-12Stylus extensions .................................................................. 5-12Special purpose styli ........................................................... 5-13

M3 threaded stylus range ..............................5-14Ruby ball styli (stainless steel stems) .................................. 5-14Ruby ball styli (tungsten carbide stems) .............................. 5-14Ruby ball styli (ceramic stems) ............................................ 5-15Ruby ball styli (carbon fi ber stems) ..................................... 5-16Star styli (fi xed) .................................................................... 5-18Stylus extensions .................................................................. 5-18Disc and hollow ball styli ....................................................... 5-19

M4 threaded stylus range ..............................5-20Ruby ball styli (stainless steel stems) .................................. 5-20Ruby ball styli (tungsten carbide stems) 20 mm range ......... 5-20Ruby ball styli 50 mm range ................................................. 5-21Ruby ball styli (tungsten carbide stems) 50 mm range ......... 5-21Ruby ball styli (ceramic stems) ............................................. 5-21Ruby ball styli 100 mm – 300 mm range .............................. 5-22Ruby ball styli (not MP700) ................................................... 5-23Star styli ................................................................................ 5-24Disc styli ............................................................................... 5-24Swivel adaptor ...................................................................... 5-24Stylus crank .......................................................................... 5-24Crash protection devices ...................................................... 5-25TS27R styli ........................................................................... 5-26Tool datuming styli ................................................................ 5-26Stylus extensions .................................................................. 5-28Digitizing styli ........................................................................ 5-29Tungsten carbide styli for CP1 probes .................................. 5-30

M5 threaded stylus range ..............................5-31Ruby micro ball styli (tungsten carbide stems) ..................... 5-31Ruby ball styli (tungsten carbide stems) ............................... 5-32Ruby ball styli (<5 mm ball diameter) ................................... 5-33Ruby ball styli (>5 mm ball diameter) ................................... 5-33Ruby ball styli (1 mm – 10 mm ball diameter) ...................... 5-34Ruby ball styli (≤ 50 mm EWL) ............................................. 5-35Ruby ball styli (≥ 50 mm EWL) ............................................. 5-36Ruby ball styli (carbon fi ber stems) ...................................... 5-37Stylus extensions .................................................................. 5-39Disc styli ............................................................................... 5-45Hemispherical styli................................................................ 5-45

Specialist ball materials .................................5-46Silicon nitride ball styli ......................................................... 5-46Zirconia ball styli ................................................................... 5-48

Accessories ....................................................5-50Stylus knuckles ..................................................................... 5-50Stylus centers ....................................................................... 5-50Adaptors ............................................................................... 5-51Cubes and bolts .................................................................... 5-52Stylus tools ........................................................................... 5-52

Stylus kits ........................................................5-53

Styli for Faro arms ..........................................5-711¼–20 UN thread styli .......................................................... 5-71M6 styli ................................................................................. 5-71

M5 styli, adaptors and accessories for Zeiss analog probe systems without probe changing ...............................................5-72Standard probes (tungsten carbide) ..................................... 5-72Swivel piece with cone ......................................................... 5-72Adaptor with cone ................................................................. 5-72Adaptor ................................................................................. 5-72Holders with cone ................................................................. 5-72

M5 styli, adaptors and accessories for Zeiss measuring probe head with probe changer and dynamic probe head (with or without probe changer) ....................5-73Standard styli (tungsten carbide) .......................................... 5-73Standard styli (ceramic) ........................................................ 5-74Styli (general) ....................................................................... 5-74Fine styli ............................................................................... 5-74Cube stars ............................................................................ 5-75Styli for thread measurement ............................................... 5-75Styli for star styli and multi-styli mounting plates (tungsten

carbide) .......................................................................... 5-75Clamping discs for star styli .................................................. 5-76Slot discs for star styli ........................................................... 5-76



C-C

ON, INC.

Table of contents

4

Tabl

e of

con

tent

s

Tungsten carbide pins for star styli ....................................... 5-76Mounting supports for star styli............................................. 5-76Rotational adjustment pieces ............................................... 5-77Holder for 1 mm – 1.5 mm diameter styli .............................. 5-77Holders for 5 styli (maximum) ............................................... 5-77Styli for universal 3D probe head only (tungsten carbide) .... 5-77Styli (tungsten carbide) ......................................................... 5-78Holder for swivel styli ............................................................ 5-78Swivel styli (tungsten carbide) .............................................. 5-78Spherical disc styli ................................................................ 5-78Extensions ............................................................................ 5-79Cubes ................................................................................... 5-80Double cube (titanium) ......................................................... 5-80Stylus discs (hardened steel) ............................................... 5-81Thread styli (steel) ................................................................ 5-81Star stylus ............................................................................. 5-81Pointed stylus ....................................................................... 5-82Cube extension ..................................................................... 5-82Joints (titanium) .................................................................... 5-82Multi-styli mounting plate (for Zeiss MT and Vast probe

heads only) ..................................................................... 5-82Bolts for spherical disc and cube (stainless steel) ................ 5-82Bolts for cubes (stainless steel) ............................................ 5-82

Adaptors for the assembly of M2, M3 and M5 styli to Zeiss measuring probe heads ..........5-83Adaptors ............................................................................... 5-83Digitizer adaptors .................................................................. 5-83

Tools and accessories for the assembly of M2, M3 and M5 styli to Zeiss measuring probe heads ....................................................5-83Stylus tool (M2 and M3 styli) ................................................ 5-83Allen keys DIN 911 ............................................................... 5-83Tool kit .................................................................................. 5-84Stylus tool kit (2 x pin-type spanners 2.9 mm for M5) .......... 5-84Stylus tool 1.7 mm for M5 ..................................................... 5-84Pin-type spanner 2.9 mm for M5 .......................................... 5-84Assortment of screws ........................................................... 5-84Spring-lock washers ............................................................. 5-84C spanners DIN 1810 ........................................................... 5-84

Adaptor plates for Zeiss probe heads ..........5-85Adaptor plate (with disc and roller, but without cube)Adaptor plate with rollers (titanium) ...................................... 5-85S-system adaptor plates with balls ....................................... 5-85Adaptor plates with rollers (Prismo)...................................... 5-85Adaptor plates for Zeiss MT/Vast with ID chip ...................... 5-86

Adaptor elements for Zeiss RST probe systems with M2/M3 connecting thread .......5-86M3 styli ................................................................................. 5-86M2 styli ................................................................................. 5-87M3 extensions (stainless steel) ............................................ 5-87M2 extensions (stainless steel) ............................................ 5-87Star styli (stainless steel) ...................................................... 5-87M2 stylus for star styli (stainless steel) ................................. 5-88Disc styli ............................................................................... 5-88Swivel adaptors .................................................................... 5-885-way stylus centers ............................................................. 5-88Stylus adaptor (M3-M2/M2-M3) ............................................ 5-89Stylus fi xing for RST probe head .......................................... 5-89M2 styli ................................................................................. 5-89M2 pointed styli ..................................................................... 5-905-way stylus center for M2 styli (large) ................................. 5-905-way stylus center for M2 styli (small) ................................. 5-90M2 joint ................................................................................. 5-90

Section 6 – Repair servicesRenishaw repair services ................................6-2Services offered ...................................................................... 6-2Advance replacements ........................................................... 6-2

Coordinate Measuring Machine products ......6-3Manual probe heads ............................................................... 6-3Motorized probe heads ........................................................... 6-3Controllers .............................................................................. 6-3Probes .................................................................................... 6-3Interfaces ................................................................................ 6-4Machine checking gage .......................................................... 6-4Changing systems .................................................................. 6-4

Machine Tool products .....................................6-5Inspection probes for machining centers ................................ 6-5Tool setting probes for machining centers .............................. 6-6Inspection probes for turning centers ..................................... 6-7Tool setting arms .................................................................... 6-7Tool setting probes for turning centers ................................... 6-7Scanning probes ..................................................................... 6-7Interfaces, receivers and inductive systems ........................... 6-7

Calibration systems .........................................6-8Repair prices .......................................................................... 6-8Calibration prices .................................................................... 6-8

Replacement parts ...........................................6-8

Section 7 – Alpha-numeric price list



C-C

ON, INC.

Coordinate measuring machine probes

Section 1

CMM section issue 15.indd 1-1CMM section issue 15.indd 1-1 30/07/2008 10:01:1930/07/2008 10:01:19


C-C

ON, INC.


1-2

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Fixed and manual probe heads

PH1A small swivel head, adjustable in both the A and B axes, with limited overtravel

protection. The probe is offset from the mounting shank Z axis.

Number of probe sockets: 1

Probe status indication: 1 LED

Cable connection: 5 pin DIN 180° socket

Overtravel break load: Adjustable from 20 gf (0.7 ozf) to locked solid

A-axis indexing: Swivel of 115° locked with hexagonal key (3 mm A/F)

B-axis indexing: 15° steps through 360°

Weight: 125 g (4.5 oz)

Mounting options: Shank to suit your CMM

Part number: A-1049-1795 Price: $1,764

PH5A 5-way fi xed head, which accommodates up to fi ve probes simultaneously.


Probe status indication: 2 LEDs




PH5/1The PH5/1 incorporates positive B-axis indexing and limited overtravel protection.


Probe status indication: 2 LEDs


Overtravel break load: Adjustable from 20 gf (0.7 ozf) to locked solid

A-axis indexing: N/A

B-axis indexing: 15° steps through 360°


Consists of:

Part number: A-1045-1883 Price: $1,899Part number: A-1045-1893 Price: $433



C-C

ON, INC.

1-3

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

PH6A compact, vertical probe head for a single probe, with a choice of integral cables

(see below).



Cable connection: Integral cable


Part number: A-1046-5097 (coiled 12-28 in, 5 pin DIN) Price: $477Part number: A-1046-5098 (coiled 18-50 in, 5 pin DIN) Price: $477Part number: A-1046-5099 (coiled 30-95 in, 5 pin DIN) Price: $477Part number: A-1046-5094 (plain 177 in, 5 pin DIN) Price: $477Part number: A-1046-5096 (coiled 23-72 in, 7 pin amph) Price: $477

PH6AThe PH6A is designed for use with autojoint probes and allows you to change

probes or add extensions without having to requalify the probe. Special order

only.





Part number: A-1051-0012 Price: $718

PH6MA fi xed head with autojoint connection for probes and adaptors. For use with

TP7M, SP600M, and SP25M.

Number of probe sockets: 1 autojoint


Cable connection: Micro ‘D’ connector



MH8A manually indexable probe head with repeatable indexing, eliminating the need

to requalify the stylus tip position after orientation. The MH8 can be used with the

TP6 probe directly or with the TP20 probe with up to 50 mm extension. An easy

upgrade, as there is no need for special software, cabling, or electronics.

2σ positional repeatability: 1.5 µm


Cable connection: 5 pin DIN type connector

A-axis indexing: 0° to 90° in 15° steps = 7 positions

B-axis indexing: ±180° in 15° steps = 24 positions

Total number of positions: 168

Maximum support capability: TP6 mounted directly

TP20 with PEL1 50 mm extension

Probe mounting: M8 bush





C-C

ON, INC.


1-4

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

MIHA manually indexable head, repeatable in 720 positions over two axes with LCD

display, the MIH is designed for use with the autojoint TP6A touch probe and long

extensions for large components. TP2, TP6, TP20 touch probes can be used with

the addition of the PAA1 or PAA2 extensions.

2σ positional repeatability: 1 µm



A-axis indexing: 105° to 0° in 7.5° steps = 15 positions

B-axis indexing: ±180° in 7.5° steps = 48 positions

Probe mounting: Autojoint



MIH-SThe MIH-S is a derivative of the well-established MIH design with enhanced

functionality to provide feedback of status and lock position over an RS232 serial

communications link.

2σ positional repeatability: 1 µm


Cable connection: 12 pin hirose connector

A-axis indexing: 105° to 0° in 7.5° steps = 15 positions

B-axis indexing: ±180° in 7.5° steps = 48 positions

Probe mounting: Autojoint



MIH-SI interface unitUsed in conjunction with the MIH-S providing power and communications to the

head as well as reporting system status to the CMM. Separate probe interface

required.

Power supply: 12 V - 30 V DC external supply (purchased

separately)

Data transmission: Serial (RS232)


Input connector: 15 way high density D-connector

Output connector: 15 way high density D-connector

Maximum cable length: 20 meters




C-C

ON, INC.

1-5

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

MH20The MH20 is an ultra-compact manually adjustable probe head offering maximum

fl exibility in probe orientation. The full range of TP20 probe modules can be used

via its integral probe mounting. The MH20 is incompatible with the MCR20.

Probe mounting: TP20 kinematic mount

Head mounting: MS/T range of shanks

Suitable interfaces: PI4-2, PI200 or PI7-2




A-axis indexing: Non-indexing swivel ±93°

B-axis indexing: Non-indexing swivel ±300°

Maximum extension bar: EM2 extension module – 75 mm (2.95 in)

MH20 head with low force module


MH20 head with standard force module


MH20 head with medium force module


MH20 head with extended force module




C-C

ON, INC.


1-6

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

MH20iThe MH20i offers the signifi cant advantage of repeatable indexing positions,

vastly improving productivity for multi-orientation measurement applications. The

MH20i is incompatible with the MCR20.


Head mounting: MS range of shanks





A-axis indexing: 0° to 90° in 15° repeatable steps

B-axis indexing: 180° in 15° repeatable steps

Repeatability of position: 1.5 µm (0.00006 in) with TP20 and 10 mm stylus

2.5 µm (0.0001 in) with EM2 extension module and

10 mm stylus


MH20i head with low force module


MH20i head with standard force module


MH20i head with medium force module


MH20i head with extended force module




C-C

ON, INC.

1-7

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

RTP20Renishaw’s new RTP20 compact head for DCC coordinate measuring

machines (CMMs) offers low-cost ‘motorized’ head functionality and integral

TP20 touch-trigger probe.

The new RTP probe head allows the integral probe to be moved to 168

repeatable positions in 15° increments using both A and B axes, allowing a

one-time qualifi cation for a stylus tip position. This eliminates the need for

costly time-consuming requalifi cation routines, ensuring fast throughput for part

inspection. Users can therefore easily access features to be measured and

optimize system performance by ensuring the probe is applied to the surface at

the best angle to achieve accurate measurements.


Head mounting: MS range of shanks





A-axis indexing: 0° to 90° in 15° repeatable steps

B-axis indexing: 180° in 15° repeatable steps

Repeatability of position: 1.5 µm (0.00006 in) with TP20 and 10 mm stylus

2.5 µm (0.0001 in) with EM2 extension module

and 10 mm stylus


RTP20 rack kit

Includes: RTP20 head

Shank (various types)

Pole

Pole adaptor (various types)

MCR20 rack

2 × TP20 modules (standard, medium, extended or low)

2 × M2 stylus spanners


Cleaning kit

Part number: A-5400-#### (see overleaf) Price: $7,200

(Additional charge for 6-way module $78 per module)

RTP20 non-rack kit

Includes: RTP20 head

Shank (various types)

Pole

Pole adaptor (various types)

1 × TP20 module (standard, medium, extended or low)



Cleaning kit

Part number: A-5400-8### (see overleaf) Price: $6,300

(Additional charge for 6-way module $78 per module)



C-C

ON, INC.


1-8

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

RTP20 part numbers

Non-rack kitA-5400-8###

This number represents the TP20

module required:

1 = Low force module

2 = Standard force module

3 = Medium force module

4 = Extended force module

5 = 6-way module

6 = EM1 module

7 = EM2 module

These numbers represent the

shank required:

01 = MS1 shank

02 = MS2 shank

03 = MS3 shank

04 = MS4 shank

05 = MS5 shank

06 = MS6 shank

07 = MS7 shank

08 = MS8 shank

09 = MS9 shank

10 = MS10 shank

11 = MS11 shank

12 = MS12 shank

13 = MS13 shank

14 = MS14 shank

15 = MS15 shank

16 = MS7(S) shank

17 = MS17 shank

18 = MS1(S) shank

19 = no shank

PLUS the pole adaptor

required:

+0 = M8 pole adaptor


+40 = 5/16 pole adaptor



Rack kitA-5400-####

This number represents the fi rst

TP20 module required:





5 = 6-way module

6 = EM1 module

7 = EM2 module

These numbers represent the

shank required:

01 = MS1 shank

02 = MS2 shank

03 = MS3 shank

04 = MS4 shank

05 = MS5 shank

06 = MS6 shank

07 = MS7 shank

08 = MS8 shank

09 = MS9 shank

10 = MS10 shank

11 = MS11 shank

12 = MS12 shank

13 = MS13 shank

14 = MS14 shank

15 = MS15 shank

16 = MS7(S) shank

17 = MS17 shank

18 = MS1(S) shank

19 = no shank

PLUS the pole adaptor

required:






This number represents the

second TP20 module required:





5 = 6-way module

6 = EM1 module

7 = EM2 module

Example

RTP20 with:

• No rack (8)

• Standard force module (2)

• MS3 shank + M6 pole adaptor (03 + 20 = 23)

= A-5400-8223

Example

RTP20 with:

• Rack

• Low force module (1)

• Standard force module (2)

• MS1(S) shank + M10 pole adaptor (18 + 80 = 98)

= A-5400-1298

See pages 1-34 and 1-35 for information on the shank type for your machine.

Please call Customer Service on 847-286-9953 for part number assistance.



C-C

ON, INC.

1-9

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Motorized probe heads

PH10TThe new PH10T motorized probe head allows complete, rapid, and repeatable

inspection of most complex components with minimum human intervention. Full

orientation of your TP2, TP6, TP20 or TP200 probe between any of 720 positions,

under manual or program control, turns your 3 axis CMM into a 5 axis machine.


Cycle time (90° move): 3.5 seconds

Total angular movement: A axis 105° to 0° in 7.5° steps = 15 positions

B axis ±180° in 7.5° steps = 48 positions

Total number of positions : 720

Maximum extension bar length: 300 mm using PEL4 extension*

Head mounting: Shank to suit your CMM

Probe mounting facility: M8 thread

Probe head control: PHC10-2 (purchased separately)

Dimensions: Length 102 mm excluding AM1, width 62 mm

Weight: 645 g


PH10MThe PH10M motorized probe head has been developed for the new generation of

contact and non-contact scanning probes. It has three times the torque of PH10T,

allowing probe extension bars up to 300 mm long to be used.

The PH10M has an autojoint mounting.


Cycle time (90° move): 3.5 seconds

Total angular movement: A axis: 105° to 0° in 7.5° steps = 15 positions

B axis: ±180° in 7.5° steps = 48 positions

Total number of positions: 720

Maximum extension bar length: 300 mm using PAA3 extension*

Head mounting: Shank to suit your CMM

Probe mounting facility: Autojoint

Probe head control: PHC10-2 (purchased separately)

Dimensions: Length 102 mm excluding AM1, width 62 mm

Weight: 645 g


PH10MQThe PH10MQ can be mounted vertically inside the CMM’s quill for a greater

working envelope by increasing the Z axis travel. The specifi cation of the PH10MQ

is identical to that of the PH10M, with the following exceptions:

Head mounting: Direct to quill

Dimensions: Length 73 mm, width 80 mm

Weight: 730 g


* On all the PH10 series of probe heads, it is possible to extend beyond 300 mm

using our range of CF extensions.



C-C

ON, INC.


1-10

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Motorized probe head accessories

AM1/AM2

The AM1 adjustment module is designed for use with the PH10T and PH10M

probe heads. The AM2 is designed for the PH10MQ probe heads. Each module

provides quick and accurate angular alignment of the motorized probe head

with the CMM’s axes and/or the autochange rack. The quick release mechanism

allows the head to be removed for storage and replaced without further

alignment.

AM1 AM2

Size: 60 mm × 15.5 mm 80 mm × 10 mm

Adjustment: ±2° in pitch and roll* ±1° in pitch and roll

±4.5° in yaw ±1° in yaw

Overtravel: ±3.5° in pitch and roll 0

Mounting: Mounts to quill using shank Mounts direct to quill

* Up to ±5.5° in pitch and roll is possible, but at the expense of overtravel.

Part number: A-1026-0320 (AM1) Price: $780Part number: A-1036-0080 (AM2) Price: $780

PHC10-2

The PHC10-2 head control receives instructions and processes signals to rotate

the angles of the PH10 series probe heads. The PHC10-2 is compatible with all

PH10 heads. It has its own internal power supply.

Data transmission: Serial (RS232) or parallel (IEEE-488)

Input connectors: 15 way ‘D’ probe

Output connectors: 7 pin DIN or 9 pin D type

Maximum cable length: 50 m (164 ft)

Hand control: HCU1 (purchased separately)

Part number: A-1368-0100 (RS232 version) Price: $2,966Part number: A-1368-0101 (IEEE version) Price: $3,079

HCU1

The HCU1 hand control unit enables the probe head to be used in a manual

mode or during a teach cycle. An LCD dot matrix display provides information

and status of the PHC10-2 system.




C-C

ON, INC.

1-11

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

REVO™The REVO™ measuring head features spherical air bearing

technology in each of its two axes, driven by brushless

motors linked to high-resolution encoders to provide fast,

ultra-high accuracy positioning.

REVO™ system overview

The system comprises the following elements:

• REVO™ head

• RSP2 2D tip sensing probe and associated stylus holders and

accessories

• RSP3 3D probe and associated accessories

• UCC2 universal CMM controller

• REVO™ PCI interface card (for UCC2)

• SPA2 servo power amplifi er

• Air fi lter unit

REVO™ – ‘tip sensing’ probe technology

• Enclosed laser directed onto a refl ector at the stylus tip.

• The stylus touches the part and bends.

• The refl ector is displaced.

• The altered return path of the laser is sensed by a PSD.

• The exact tip position is known because the refl ector and the stylus

ball are close together.

• Stylus wear is minimized by using a low scanning force.

REVO™ features and benefi ts:

• Incorporates Renscan5™ fi ve axis scanning technology minimizing

CMM motion and the associated CMM dynamic errors

• Increased measuring speed, up to 500 mm/s resulting in increased

measurement throughput

• Data collection rates up to 6,000 points per second

• Infi nite positioning and fi ve axis motion reduces non-productive

transitions between features

• Stylus wear minimized by extremely low scanning forces

• Infi nite positioning and fi ve axis motion aid access to diffi cult

features

• Rapid calibration with all positions inferred means more time

measuring

• Maximum reach up to 500 mm with maintained effective working

length

• Standard M2 styli for convenience

• Probe and stylus changing capability allowing fl exibility and future

probing technology compatibility

Hardware integration

• The UCC2 is fundamental to the REVO™

system

• The UCC2 controller features Renscan5™

scanning routines particular to fi ve-axis motion

and scanning

• SPA2 is a servo power amplifi er used to drive

the head and CMM

• MCU1 or MCU5 is the multi-function hand

control unit required for the system

Software integration

• The Renishaw UCCserver™ software

application will provide the interface for REVO™

control

• UCCserver™ is based on I++DME command

protocol



C-C

ON, INC.


1-12

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

REVO™ entry level kit 1

Includes: REVO™ head kit

RSP2 kit

RSH250 kit

50 mm diameter datum ball kit


REVO™ entry level kit 2


RSP2 kit

RSH250 kit

RSH350 kit

REVO™ rack kit #4



REVO™ standard kit 1


RSP2 kit

RSP3 kit

RSH250 kit

RSH350 kit

REVO™ rack kit #1



REVO™ standard kit 2


RSP2 kit

RSP3 kit

RSH250 kit

RSH350 kit

REVO™ rack kit #2



REVO™ head kit


RSP2 probe kit


RSP3 probe kit


Specifi cation summary REVO™

Operating temperature 14 °C to 30 °C (57 °F to 86 °F)

Storage temperature -10 °C to 70 °C (14 °F to 158 °F)

Weight (excluding probe and cables) 1.75 kg

Dimensions Height (overall) 239 mm (9.41 in)

B axis 86 mm (3.40 in) square

A axis swept diameter 118 mm (4.65 in)

Air specifi cation Incoming supply to fi lter specifi cation (ref: ISO8537.1)

Particle size Class 4 15 µm

Line pressure of 6 bar to 6.5 bar

Dirt concentration Class 4 8 mg/m3

Dewpoint Class 4 3 °C

Oil Class 4 5 mg/m3

After fi ltration air specifi cation (ref: ISO8537.1)

Particle size Class 2 1 µm

Pressure 5 barDirt concentration Class 2 1 mg/m3

Dewpoint Class 3 -20 °C

Oil Class 2 0.1 mg/m3

Movement speed 3 revolutions per second

Rotation angles A axis -5° to 120°

B axis Continuous

Angular resolution 0.08 arc second

Bearings Air

Change rack system Allowing both probe changing and stylus holder changing



C-C

ON, INC.

1-13

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

REVO™ rack kit #1

Includes: 600 mm MRS kit

FCR25 rack kit

FCR adaptor kit

REVO™ RCP kit (4 ports)

Additional 62.5 mm legs


REVO™ rack kit #2


FCR25 rack kit




REVO™ rack kit #4





RSH250 kit


RSH350 kit




RCP rack changing port




C-C

ON, INC.


1-14

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Touch probes

TP1S/TP1SMA robust and reliable probe which is especially suited for manual CMMs. It is

available in two versions with differing plug socket orientations:

TP1S cable connects vertically

TP1SM cable connects horizontally

Sense directions: ±X, ±Y, +Z

2σ unidirectional repeatability: 0.5 µm

Pre-travel variation: ±2.0 µm

Stylus force range: 10 g to 50 g

Stylus overtravel: XY plane ±19.5°

+Z axis 8.5 mm @ 15 g

5.0 mm @ 50 g

Suitable interfaces: PI4-2, PI7, or PI200

Stylus thread size: M3

Mounting option: Shank to suit your CMM

Test conditions: 31 mm stylus @ 8 mm/s with

trigger force of 15 g

Part number: A-1041-7540 (TP1S) Price: $3,316Part number: A-1041-7541 (TP1SM) Price: $3,316



C-C

ON, INC.

1-15

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP20/TP20 NI modular probesThe TP20 is a 5-way or 6-way kinematic touch-trigger probe. Its

two piece design comprises a probe body and detachable stylus

module(s) which gives the ability to change stylus confi gurations

either manually or automatically without requalifi cation of the

stylus tips. It affords signifi cant time savings in inspection

routines.

A direct replacement for the industry standard Renishaw TP2

probe, the TP20 probe system brings a range of new benefi ts

to manual and DCC CMM applications, and can easily be

retrofi tted to existing TP2 installations.

The TP20 can be used on a wide range of Renishaw’s manual

or motorized probe heads, either by direct mounting using the

standard M8 thread or, alternatively, by using a PAA# adaptor to

connect to an autojoint.

The system components are:

• TP20/TP20 NI probe body

• TP20 stylus module – seven module variants allow for

optimization of performance to suit the application

• MCR20 module changing rack – automatic operation

The TP20 probe system may be used with Renishaw’s PI 4-2,

PI 7-2 or PI 200 probe interfaces.

TP20 probe body

The TP20 probe body houses one half of the highly repeatable

magnetic kinematic coupling that attaches the stylus module

and body. The body also contains a magnetic proximity switch to

inhibit triggering of the probe during automatic module changing

with MCR20.

Note: If the probe is operated close to magnetized parts/

clamping etc, the probe trigger may become inhibited.

Countermeasures include the use of long styli, stylus extensions

or body orientation to increase the distance to the magnetic

source. Alternatively, use the TP20 NI probe body.

TP20 NI probe body

The TP20 NI probe differs from the TP20 body in that it is not

affected by magnetic fi elds. However the probe trigger must

be inhibited through software during change cycles using the

MCR20.

TP20 probe body

TP20 stylus modules(7 variants)

M8 × 1.25 thread

Ø13.2 mm (0.52 in)

9.0

mm

(0.

35 in

)

3 mm (0.12 in)

14° 14°+Z overtravel

–Z overtravel

SF

/LF

/MF

/EF

38

mm

(1.

50 in

)6W

42

mm

(1.

65 in

)E

M1

88 m

m (

3.46

in)

EM

2 11

3 m

m (

4.45

in)

+Z overtravel

SF/EM1/EM2 4.0 mm (0.16 in)

LF 3.1 mm (0.12 in)

MF 3.7 mm (0.15 in)

EF 2.4 mm (0.09 in)

6W 4.5 mm (0.177 in)

-Z overtravel

6W 1.5 mm (0.06 in)



C-C

ON, INC.


1-16

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

10 mm 50 mm 100 mm

The above data applies for test conditions as follows:

Stylus length as stated above.

Stylus velocity 480 mm/min (1.57 ft/min)

Specifi cation summary TP20 TP20 NI

Principal application DCC and manual CMMs suitable for most applications

DCC and manual CMMs where operation is within a magnetic fi eld

Sense directions All modules except 6W6W

±X, ±Y, +Z±X, ±Y, ±Z

±X, ±Y, +Z±X, ±Y, ±Z

Pre-travel variation LFSF/EM1/EM2MFEF6W

±0.6 µm (±0.000023 in)±0.8 µm (±0.000032 in)±1.0 µm (±0.000039 in)±2.0 µm (±0.000079 in)±1.5 µm (±0.000058 in)

±0.6 µm (±0.000023 in)±0.8 µm (±0.000032 in)±1.0 µm (±0.000039 in)±2.0 µm (±0.000079 in)±1.5 µm (±0.000058 in)

Repeatability of stylus change (max)

With SCR200Manual

±0.5 µm (±0.000020 in)±1.0 µm (±0.000040 in)

±0.5 µm (±0.000020 in)±1.0 µm (±0.000040 in)

Stylus range M2 M2

Probe mounting method M8 thread M8 thread

Suitable interface PI 4-2, PI 7-2, PI 200 PI 4-2, PI 7-2, PI 200

Stylus module changing rack (automatic) MCR20 MCR20

Stylus module storage rack (manual) MSR1 MSR1

Module type and styli length

Module type and test stylus length

Trigger force Overtravel force Overtravel displacement Unidirectional repeatability 2σ

at stylus tip

2D (XY) form error

XY Z XY +Z -Z XY +Z -Z

SF10 mm

0.08 N 0.75 N 0.2-0.3 N 3.5 N - ±14° 4.0 mm(0.16 in)

- 0.35 µm(0.000014 in)

±0.8 µm(±0.000032 in)

LF10 mm

0.055 N 0.65 N 0.09 N 1.15 N - ±14° 3.1 mm(0.12 in)

- 0.35 µm(0.000014 in)

±0.6 µm(±0.000024 in)

MF25 mm

0.1 N 1.9 N 0.2-0.4 N 7.0 N - ±14° 3.7 mm(0.15 in)

- 0.50 µm(0.000020 in)

±1.0 µm(±0.000039 in)

EF50 mm

0.1 N 3.2 N 0.2-0.5 N 10.0 N - ±14° 2.4 mm(0.09 in)

- 0.65 µm(0.000026 in)

±2.0 µm(±0.000079 in)

6W10 mm

0.14 N 1.6 N 0.25 N 2.5 N 9.0 N ±14° 4.5 mm(0.18 in)

1.5 mm(0.059 in)

0.80 µm(0.000032 in)

±1.5 µm(±0.000059 in)

EM110 mm

0.08 N 0.75 N 0.2-0.3 N 3.5 N - ±14° 4.0 mm(0.16 in)

- 0.35 µm(0.000014 in)

±0.8 µm(±0.000032 in)

EM210 mm

0.08 N 0.75 N 0.2-0.3 N 3.5 N - ±14° 4.0 mm(0.16 in)

- 0.35 µm(0.000014 in)

±0.8 µm(±0.000032 in)



C-C

ON, INC.

1-17

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP20 probe kits

TP20 probe kit 1

Includes two standard force modules.


TP20 probe kit 2

Includes one standard force and one medium force

module.


TP20 probe kit 3

Includes one standard force and one extended force

module.


TP20 probe kit 4

Includes two medium force modules.


TP20 probe kit 5

Includes one medium force and one extended force

module.


TP20 probe kit 6

Includes two extended force modules.


TP20 probe kit 7

Includes one standard force and one 6-way module.


TP20 non-inhibit (NI) probe kits

TP20 non-inhibit probe kit 1




Includes one standard force and one medium force

module.



Includes one standard force and one extended force

module.






Includes one medium force and one extended force

module.







C-C

ON, INC.


1-18

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP20 accessories

TP20 probe modules

Standard force probe module


Medium force probe module


Extended force probe module


Low force module

This module has a lower trigger force for use on

components where a low probing force is needed.


6-way probe module


EM1 module only kit

This module is based on the standard force module with

an integral 50 mm carbon fi ber extension piece.


EM2 module only kit

This module is based on the standard force module with

an integral 75 mm carbon fi ber extension piece.


EM1/EM2 kit

Includes: TP20 EM1 standard module assembly

TP20 EM2 standard module assembly

Test certifi cate

EMI1/EM2 user’s information


Cleaning kit




C-C

ON, INC.

1-19

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

MCR20The MCR20 module changing rack provides rapid automatic

changing of probe modules without the need to requalify. Rack

function is completely passive and does not require any electrical

connections.

Installation and set-up of the system is achieved with minimal

operator skill as no special software or communications are

required. The rack base and docking port assembly incorporate

hinged overtravel mechanisms to assist crash protection. The kits

include two probe modules, a mounting kit, a location plate, and

a PS2R stylus.

Mounting fi xture: Single stud

Number of ports: 6

Repeatability of module change: Automatic < 1 µm

Manual < 2 µm

MCR20 probe module change rack kits

MCR20 module change rack kit 1



MCR20 probe module change rack kit 2

Includes one standard force and one medium force module.



Includes one standard force and one extended force module.






Includes one medium force and one extended force module.





MCR20 location plate

Part number: M-1085-0301 Price: $10



C-C

ON, INC.


1-20

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP2 5-wayTP2 5-way is the industry-standard probe for most CMM applications. Its compact

dimensions are ideal for probing into restricted component features.

Sense directions: 5-way (±X, ±Y, +Z)




Stylus overtravel: XY plane ±14°

+Z axis 4.5 mm @ 7 g

3.0 mm @15 g

Mounting options: M8 thread


Suitable interface: PI4-2, PI7 or PI200


trigger force of 7 g to 8 g


TP6/TP6AThe TP6 combines the robust characteristics of the TP1(S) with the repeatability

of the TP2. It can be used on manual or DCC CMMs along with Renishaw’s vast

range of heads and extensions. The TP6A incorporates an autojoint for use with

the Renishaw autochange system, or for manual probe changing. The TP6A

allows for fast probe exchange without redatuming.

Sense directions: ±X, ±Y, +Z




Stylus overtravel: XY plane ±22°

+Z axis 6.5 mm @ 12 g

3.0 mm @ 30 g

Mounting options: TP6 M8 thread

TP6A Autojoint


Test stylus length: 21 mm

Suitable interface: PI4-2, PI7, PI200


trigger force of 11 g to 13 g

Part number: A-1039-0001 (TP6) Price: $3,522Part number: A-1039-0028 (TP6A) Price: $3,641



C-C

ON, INC.

1-21

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP7MThe TP7M is designed to maintain a high level of accurate and reliable

performance across a wide range of conditions. The TP7M must be used with

either the PH10M probe head or a PH6M fi xed head.

Sense directions: ±X, ±Y, ±Z

2σ unidirectional repeatability: High sensitivity 0.25 µm

Mid sensitivity 0.25 µm

Pre-travel variation: High sensitivity ±0.25 µm

Mid sensitivity ±0.50 µm

Trigger force: XY plane 2 g

Z axis 15 g

Overtravel force: XY plane 50 g

Z axis 300 g

Stylus overtravel: XY plane 16°

+Z axis 5 mm

-Z axis 5 mm

Max. extension on PH10M: 200 mm

Mounting options: Autojoint


Test stylus length: 50 mm

Suitable interface: PI7-2 only

Test conditions: 50 mm stylus @ 8 mm/s

TP7M probe kit


TP7M EPThe TP7M EP (enhanced performance) is capable of achieving a 3D accuracy of

<0.6 µm tested to ISO 10360 Pt 2.

TP7M EP probe kit




C-C

ON, INC.


1-22

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP200/TP200B modular probesThe TP200 and TP200B are electronic probes using strain

gauge technology which gives higher accuracy than kinematic

touch-trigger probes. They combine outstanding metrology

performance with superior functionality to produce a highly

versatile DCC CMM probing system with excellent productivity.

The TP200 system components are:

• TP200 probe body – the standard model

• TP200B probe body – a variant model with increased

vibration tolerance

• TP200 stylus module – choice of fi xed overtravel forces:

‘SF’ (standard force) or ‘LF’ (low force)

• PI 200 probe interface

• SCR200 stylus changing rack

TP200 probe body

The TP200 probe incorporates micro strain gauge transducers

delivering excellent repeatability and accurate 3D form

measurement even with long styli. The sensor technology

gives sub-micron triggering performance and eliminates the

lobing characteristics encountered with standard probes. The

solid state ASIC electronics within the probe ensure reliable

operation over millions of trigger points.

TP200B probe body

The TP200B probe uses the same technology as TP200 but

has been designed to have a higher tolerance to vibration.

This helps to overcome the problem of ‘air’ trigger generation

which can arise from vibrations transmitted through the CMM or

when using longer styli with faster positioning speeds. Please

note that we do not recommend the use of TP200B with the LF

module or cranked/star styli.

The above data applies for test conditions as follows:

Stylus length 50 mm (1.97 in)Stylus velocity 480 mm/min (1.57 ft/min)

* Air trigger (or false trigger). The TP200B reduces triggers that may be caused by vibrations.

Measuring performance TP200 TP200B

Principal application DCC CMM where high accuracy measurement is required

As TP200 but where ‘air’ * trigger events occur

Sense directions 6-way: ±X, ±Y, ±Z 6 way: ±X, ±Y, ±Z

Unidirectional repeatability (2σ µm)

Trigger level 1Trigger level 2

0.4 µm0.5 µm

(0.000016 in)(0.000020 in)

0.4 µm0.5 µm

(0.000016 in)(0.000020 in)

XY (2D) form measurement deviation


±0.8 µm±0.9 µm

(0.000032 in)(0.000036 in)

±1.0 µm±1.2 µm

(0.000040 in)(0.000047 in)

XYZ (3D) form measurement deviation


±1.0 µm±1.4 µm

(0.000040 in)(0.000056 in)

±2.5 µm±4.0 µm

(0.000100 in)(0.000160 in)

Repeatability of stylus change

With SCR200Manual

±0.5 µm±1.0 µm

(0.000020 in) max(0.000040 in) max

±0.5 µm±1.0 µm

(0.000020 in) max(0.000040 in) max

Trigger force XY planeZ axis

All modulesAll modules

0.02 N0.07 N

0.02 N0.07 N

Overtravel force (@ 0.5 mm displacement)

XY plane

Z axis

SF/EO moduleLF moduleSF/EO moduleLF module

0.2 N - 0.4 N0.1 N - 0.15 N4.9 N1.6 N

0.2 N - 0.4 N0.1 N - 0.15 N4.9 N1.6 N

Weight (probe sensor + module) 22 g (0.8 oz) 22 g (0.8 oz)

Max. extension (if on PH10 series head) 300 g (11.8 oz) 300 g (11.8 oz)

Max. recommended stylus length (M2 stylus range)

SF/EO moduleLF module

50 mm (1.97 in) steel - 100 mm (3.94 in GF)20 mm (0.79 in) steel - 50 mm (1.97 in GF)

50 mm (1.97 in) steel - 100 mm (3.94 in GF)20 mm (0.79 in) steel - 50 mm (1.97 in GF)

Probe mounting method M8 thread M8 thread

Suitable interface PI 200 PI 200

Stylus module changing rack (automatic) SCR200 SCR200

Stylus module storage rack (manual) MSR1 MSR1



C-C

ON, INC.

1-23

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

TP200/TP200B probe kits

TP200 probe with standard force module


TP200 probe with low force module


TP200B probe with standard force module


TP200 accessories

Standard force stylus module


Low force stylus module


TP200 probe cleaning kit


GF stylus kit *


*See Discount stylus kits section for kit contents.



C-C

ON, INC.


1-24

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SCR200The SCR200 stylus changing rack provides rapid, automatic changing of styli

without the need to requalify probe tips. Installation and set-up of the system

are achieved with minimal operator skill, as no special CMM cabling, software or

communications are required. The SCR200 is powered and serviced entirely by

the PI200 interface and is fully crashed protected.

Mounting: Horizontal or vertical

Mounting fi xture: Single stud

Number of ports: 6

Module location and retention: Magnetic

Repeatability of stylus change (2σ) at 50 mm: Automatic: 1 µm

Manual: 2 µm

Change cycle: <2 seconds

SCR200 kit

Includes: 3 stylus changing modules

Mounting kit

PS2R stylus

Location plate

Part number: A-1207-0030 (standard force modules) Price: $8,692Part number: A-1207-0070 (low force modules) Price: $8,692

SCR200 stylus changing rack only


SCR200 datum stylus (PS35R)


SCR200 cables

Part number: A-1016-7630 (PL63S - 5 m) Price: $104Part number: A-1016-7631 (PL64S - 10 m) Price: $119Part number: A-1016-7632 (PL65S - 20 m) Price: $156

SCR200 mounting kit


SCR200 location plate




C-C

ON, INC.

1-25

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Special probing systems

SP25The SP25M is actually two sensors in one! – enabling the user to

SCAN for form measurement or reverse engineering and TOUCH-

TRIGGER PROBE (TTP) for geometry.

Highly accurate scanning performance with (M3) stylus lengths

from 20 mm to 200 mm together with the ability to carry Renishaw’s

TP20 range of touch-trigger probe modules mean that the SP25M

system provides unmatched fl exibility to optimize a measurement

solution to suit the application.

The probe is just 25 mm in diameter, compatible with Renishaw’s

PH10M/MQ, PH6M and PHS1 probe heads, and can also

be mounted using a multiwired extension bar. Together these

combinations permit excellent reach and access to part features.

Physical measurement range: ±0.5 mm defl ection in all directions in all orientations

Physical overtravel range: X,Y ±2.0 mm +Z 1.7 mm -Z 1.2 mm

Resolution: Capable of <0.1 µm

Spring rate: 0.6 N/mm to 0.2 N/mm – dependent on stylus length

Dimensions: Ø25 mm × length dependent on module used

Mass: SP25M body 65 g

SM25-1 scan module 35 g (includes SH25-1, but excludes stylus)



TM25-20 TTP module 40 g (includes TP20 standard module, but excludes stylus)

Mounting: Multiwired autojoint connnection

• compatible with PH10M, PH10MQ, and PH6M

• may be mounted to autojoint extension bars

Signal outputs: Non-linear and non-orthogonal analog outputs – rate, gain and resolution are not fi xed

Interface: AC3 card

SP25M special SCAN/TTP full combination kit

The full scanning system plus the capability to use TP20

modules – this kit includes all the equipment in these

separate kits and is supplied as one complete kit:

1 × A-2237-1001 SP25M scanning probe kit #1

(includes SM25-1 kit)

1 × A-2237-1102 SM25-2 scanning module kit

1 × A-2237-1103 SM25-3 scanning module kit

1 × A-2237-1200 TM25-20 TTP module adaptor ONLY

(to directly carry any TP20 module)




C-C

ON, INC.


1-26

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SP25M scanning probe kit #1 (entry level kit)

Includes: 1 × SP25M probe body

1 × SM25-1 scanning module kit (see below)














SM25-1 scanning module kit

Includes: 1 × SM25-1

2 × SH25-1




1 × SH25-2




1 × SH25-3




C-C

ON, INC.

1-27

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SM25-4 full module kit


2 × SH25-4

full stylus kit containing:

1 × M3 stylus D5R L21 EWL21 d2.5SS

1 × M3 stylus D5R L50 EWL50 d2.5CE

1 × M3 stylus D10R L200 EWL200 d4C/F




2 × M2-M3 stylus tools


SM25-4 entry level module kit


1 × SH25-4

basic stylus kit containing:





SM25-4 basic module kit


2 × SH25-4

basic stylus kit containing:





TM25-20 TTP module adaptor only


TM25-20 TTP module adaptor kit #1

Includes: 1 × TM25-20

2 × TP20 standard modules


SM25-1 scanning module only








SH25-1 stylus holder only








AC3 interface card




C-C

ON, INC.


1-28

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

FCR25The full potential of the SP25M system may be realized when

the fl exible change rack option is incorporated. Based on the

versatile FCR25 triple-port rack unit, which allows any of the

SP25M system elements to be rapidly exchanged in any of the

ports, this is undoubtedly the most adaptable rack system yet

from Renishaw. The FCR25 mounts directly to Renishaw’s MRS

modular rack system. Alternatively, compact 3-port and 6-port

‘standalone’ racks are available which incorporate FCR25.

FCR25 fl exible change rack unit

Triple-port unit for MRS system.

Includes: 1 × FCR25

3 × PA25-SH

3 × PA25-20

Note: Requires an MRS kit for CMM mounting.


FCR25-L3 3-port standalone change rack unit

Includes: 1 × FCR25 with integral leg for table mounting

3 × PA25-SH

3 × PA25-20


FCR25-L6 6-port standalone change rack unit

Includes: 2 × FCR25 with integral leg for table mounting

3 × PA25-SH

3 × PA25-20


FCR25 port adaptor insert kit

Includes: 3 × PA25-SH

3 × PA25-20




C-C

ON, INC.

1-29

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SP80 probe kit 1

Includes: SP80 probe body

SH80 stylus holder

KM80 quill mount plate

PL157 probe cable

60 mm long stylus

Tools


SP80 probe kit 2

Includes: SP80 probe kit 1

SCP80 stylus change port (3 off)

MRS kit 2 (600 mm rail length - see page 1-46)


SP80 probe kit 3





SP80 probe kit 4





SP80 probe kit 5


SH80 stylus holder (3 off)


SP80 probe kit 6




SP80 probe kit 7




SP80The SP80 is a quill-mounted scanning probe that uses digital scale

and readhead technology, plus Renishaw’s innovative isolated optical

metrology principles, to provide exceptional scanning performance, even

with long styli.

It is able to reach deep into parts by carrying styli up to 500 mm long

and 500 g mass, including star confi gurations which do not require

counterbalancing. Renishaw’s M5 styli products are designed to

complement SP80 and ensure maximum performance.

Detachable stylus holders (SH80) permit rapid and repeatable

interchange between stylus confi gurations, thus eliminating recalibration,

maximizing productivity and permitting optimum solutions to match the

application.

A simple and robust passive design, with no internal motors to generate

heat or reliability issues, avoids unnecessary system complexity.

The SP80 probe body houses the sensor mechanism comprising a ‘box’

spring motion system and the isolated metrology system featuring high

accuracy digital scale and readheads.

Longer stylus lengths may be carried subject to operating conditions

(consult Renishaw for application assistance).


SP80probe body

SH80 stylus holder

SH80removal tool



C-C

ON, INC.


1-30

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SP80HThe SP80H is a horizontal quill-mounted version of

the SP80 probe that uses the same digital scale and

readhead technology as the SP80 probe.

The SP80H is intended for use on horizontal arm

machines and uses the standard SH80 stylus holder and

KM80 quill mount. It uses the SCP80V for automated

stylus changing.

It is able to carry Renishaw’s range of M5 threaded styli

up to 500 mm long. Stylus confi gurations up to 300 g

unbalanced are possible.

SP80H probe kit 1

Includes: SP80H probe body

SH80 stylus holder

SH80K stylus holder


SH80 removal tool

PL157 probe cable

60 mm long stylus

Tools


Other probe kits similarly confi gured to the SP80 probe

kits are available upon request. Please contact Renishaw

for details.



C-C

ON, INC.

1-31

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SCP80 stylus change port

Individual ports for rapid interchange between SH80s.

The SCP80 mounts to Renishaw’s modular rack system

(MRS) – see page 1-46.


SCP80V rack port

The SCP80V is a rack port designed for use with SP80H

to allow automatic changing of the SCP80 stylus holders

on horizontal arm machines. It may also be used for

changing stylus holders that have long styli protruding

from the rear of a horizontally mounted port.


SH80 stylus holder

Rapidly interchangeable onto the probe body via a

magnetic kinematic joint, the SH80 features a 5-way

stylus cube which can be rotated to align styli as desired.


SH80K stylus holder

The SH80K is a stylus holder that allows you to power

off the SP80 and SP80H probes and turn them back on

without needing to re-home the probe.


SH80 removal tool

The SH80 removal tool is used to manually remove the

SH80 or SH80K stylus holder from the SP80 or SP80H.



The standard mounting plate between the CMM quill

(80 mm square) and the SP80 probe body. Provides

easy and repeatable removal/replacement of the probe.

Alternative CMM quill mountings are available (see

KM6080 and SM80 below).



As KM80 but used to mount SP80 onto a 60 mm square

CMM quill.


MRS

SCP80

SM80 shank mount plate

As KM80 but with a shank mount to the CMM (non-

preferred method).


IU80 interpolator unit

Required for all OEM controller installations (as opposed

to Renishaw’s UCC controller installations which require

use of the UCC/SP80 daughter card).


CC6 counter card

Required where this function is not performed by the

CMM controller/PC.


Cables

PL156

IU80 to OEM controller (supplied unterminated).


PL157

SP80 probe cable (included with all SP80 kits).


PL158

IU80 to CC6.




C-C

ON, INC.


1-32

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

SP600MThe SP600M is an autojointed, multiwired analog scanning probe which enables

a CMM to gather large amounts of data very rapidly for inspection or digitizing

purposes. Low spring forces allow scanning of fi nely detailed parts. The probe

can be used with a PH10M or PH6M probe head and is compatible with the

Renishaw autochange system.

Measurement range: ±1 mm (0.04 in) X, Y, and Z

Return to zero: <5 µm (0.0002 in) from 0.5 mm defl ection

Resolution: 0.1 µm (0.000004 in) with optional AC2 interface

0.5 µm (0.00002 in) with optional AC1 interface

Spring rate: 120 gf/mm nominal

Outputs (X,Y,Z): Analog proportional voltage output scaling: 4 V to 8.5 V/mm

Interface: AC1 or AC2 analog converter PC card (optional)

Mounting: Multi-wired autojoint

Dimension: Length 107.5 mm, diameter 50 mm

Weight: 216 g


AC1 analog converter PC card


AC2 analog converter PC card


Stylus module - SH600 standard


Stylus module - SH600 extended


SP600QThe SP600Q is a quill-mounted version of the SP600M probe. It can therefore be

connected directly to the quill of a CMM and an external cable carries the probe

signal to the interface card. The specifi cation for the SP600Q is identical to the

SP600M, with the following exceptions:

Mounting: Direct in quill

Dimensions: Length 99 mm, diameter 60 mm

Weight: 299 g

SP600Q kit


SCR600 stylus changing rackThe SCR600 is a passive stylus change rack for use with the SP600M and

requires no electrical connections. It houses up to four stylus modules per rack.

The rack kit includes two stylus changing modules and additional modules can be

purchased separately.




C-C

ON, INC.

1-33

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Gram gageThe gram gage allows you to adjust, reset and check probe trigger force settings

on all standard Renishaw CMM touch-trigger probes. Setting the optimum trigger

force using the gram gage maximizes probe performance. It can be used to set

trigger force settings over a range of 3 to 30 grams.

Overall length: 90 mm

Needle length: 35 mm

Depth: 19 mm

Width: 48 mm

Range: 3 to 30 gram range with 1 gram graduations

* This is the optimum trigger force recommended by Renishaw. Higher trigger

forces may be required for longer styli.

Part number: P-GA01-0001 Price: $146

Probe Stylus length (mm)

Optimum trigger force (grams) *

TP1 31 15

TP2-5W 10 7 to 8

TP2-6W 10 7 to 8

TP6 21 11 to 13

TP6A 21 11 to 13



C-C

ON, INC.


1-34

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

CMM probe shanksShanks are used to mount the probe head to the quill of the

CMM. The shanks listed below are suitable for all Renishaw

manual and motorized heads, as well as the TP1 and MIP

probes.

Note: The PH6 requires a different shank and has a separate

listing (see overleaf).

Shank Used on the following machines Part number Price

MS1 Brown & Sharpe, Bridgeport, Elm Systems, Fanamation, Giddings & Lewis, M-1041-2146 $151

I.T.P., Poli, Portage Machine, Tesa, Zett-Mess

MS1(S) New Carl Zeiss A-1041-7114 $151

MS2 Boice, Carl Zeiss, Federal Products, Helmel, Kemco, Metrologic, MFO, Mora, M-1041-1650 $151

Numerex, Real Meca, Starrett, Tokyo-Boeki, Tri-mesures, TSK, and Wenzel

MS3 LK Tool (meter 4), Ferranti, Tarus, W & A, Eley & Warren M-1041-1656 $151

MS5 Ferranti M-1041-1652 $151

MS6 C.E. Johannson (old specifi cation) M-1041-1653 $151

MS7 Renault (Seiv), Tri-Measures M-1041-1654 $151

MS7(S) Starrett (new specifi cation) M-1041-7132 $193

MS8 Olivetti M-1041-1657 $151

MS9 MTI Corporation (UK) M-1041-4843 $151

MS10 MTI Corporation M-1041-7507 $151

MS11 Crown Windley M-1041-1088 $151

MS12 MTI Corporation (new specifi cation) M-1041-7068 $151

MS13 DEA Corp M-1041-5348 $151

MS14 CTA, Real Meca M-1041-5981 $151

MS15 C.E. Johannson (new specifi cation) M-1041-2153 $151

MS17 Stiefelmayer A-1041-7113 $215

The correct shank must be chosen to suit the mounting facility of

your coordinate measuring machine.

Shanks are included in the price of Renishaw heads and

TP1 and MIP probes, but must be specifi ed when placing an

order. See the drawings on the following pages for the exact

dimensions of each shank.



C-C

ON, INC.

1-35

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Standard base diameter 41.35 - 41.45 mm (1.630 - 1.632 in)

MS1 MS2 MS3 MS4

M5 × 0.8 mm

Ø 7.0 mm(0.276 in)

Ø 20 mm(0.787 in)

1/4in BSF × 26TPI

Ø9.500 - 9.512 mm(0.3740 -0.3745 in)

Ø9.497 - 9.524 mm(0.3739 -0.3750 in)

Ø24.989 - 24.984 mm(0.9838 -0.9840 in) Ø10.008 -

10.013 mm(0.3940 -0.3942 in)

43.9

mm

(1.7

3 in

)

25.4

mm

(1.0

0 in

) 50.8

mm

(2.0

in)

36.6

8 m

m(1

.44

in)

MS5 MS6 MS7 MS8

1/4in BSF × 26TPI

CirclipWasher

Bush

Ø 7.0 mm(0.276 in) Ø 7.0 mm

(0.276 in)

Ø 18.0 mm (0.709 in)

Ø24.995 - 25.000 mm(0.9841 -0.9843 in)

Ø15.983 - 15.994 mm(0.6293 -0.6297 in)

Ø13.997 - 14.003 mm(0.5511 -0.5513 in)

Ø10.008 - 10.013 mm(0.3940 - 0.3942 in)

45.4

7 m

m(1

.79

in)

40 m

m(1

.57

in)

35 m

m(1

.38

in)

85 m

m

(3

.35

in)

MS9 MS10 MS11 MS12

Ø 10.0 mm(0.394 in)

Ø 26 mm(1.02 in)

M10 × 1.5 mm

Ø13.960 - 13.970 mm(0.5496 -0.5500 in) Ø14.996 -

14.998 mm(0.5904 -0.5905 in)

Ø13.990 - 13.996 mm(0.5508 -0.5510 in)66

mm

(2.6

0 in

)

26 m

m(1

.02

in)

19 m

m(0

.75

in)

25 m

m(0

.98

in)

13 m

m

(0.5

12 in

)47

mm

(1.8

5 in

)

MS13 MS14 MS15 MS17

Ø 16 mm(0.63 in)

Ø 7.0 mm(0.276 in)

Ø 7.0 mm(0.276 in)

5.0 mm (0.196 in)

25 m

m(0

.98

in) 50

mm

(1.9

7 in

)

60 m

m(2

.36

in)

50 m

m(1

.97

in)

Ø19.991 - 20.000 mm(0.7870 -0.7874 in)

Ø11.989 - 12.000 mm(0.4720 -0.4724 in)

Ø13.997 - 14.003 mm(0.5511 -0.5513 in)

Ø11.993 - 11.998 mm(0.472 -0.477 in)

15.0

mm

(0.5

9 in

)

Ø 7.0 mm(0.276 in)

Ø 7.0 mm(0.276 in)

Ø 13.965 mm(0.550 in)

16 m

m(0

.630

in)

63 m

m

(2.4

8 in

)



C-C

ON, INC.


1-36

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

PH6 shanks

Shank Used on the following machines Part number PriceMS1/T Brown & Sharpe, Bridgeport, Elm Systems, Fanamation, Giddings & Lewis, Poli, M-1046-1121 $215

& Portage Machine

MS2/T Federal Products, Helmel, Kemco, Mora, Numerex, Starrett, Tokyo-Boeki, & Wenzel M-1046-1120 $151

MS3/T Eley, Ferranti, LK Tool (meter 4), Tarus, W & A, & Warren M-1046-1126 $151

MS4/T LK Tool (micro) M-1046-1128 $151

MS5/T Ferranti M-1046-1122 $151

MS6/T C.E. Johannson M-1046-1123 $151

MS7/T Renault M-1046-1124 $151

MS8/T Olivetti M-1046-1802 $151

MS9/T MTI Corporation (UK) M-1046-4545 $151

MS11/T Crown & Windley M-1046-2661 $151

MS18/T Mora M-1046-7107 $151

Standard base diameter 18.9 - 19.1 mm (0.74 - 0.75 in) unless stated

MS1/T MS2/T MS3/T MS5/T MS7/T

1/4 in BSF

1/4in BSF

Circlip

Washer

Bushp

43.9

mm

(1.7

3 in

)

25.4

mm

(1.0

0 in

)

45.5

7 m

m(1

.79

in)

50.8

mm

(2.0

0 in

)

35 m

m(1

.38

in)

Ø 5.3 mm(0.209 in)

Ø 15.983 -15.994 mm(0.6293 - 0.6297 in)

Ø 10.008 - 10.013 mm(0.3940 - 0.3942 in)

1/4 in BSF

Ø 20 mm(0.787 in)

Ø 26.99 - 27.0 mm(1.06 - 1.63 in)

Ø 5.3 mm(0.209 in)

M5 × 0.8 mm

Ø 9.500 - 9.512 mm(0.3740 - 0.3745 in)

Ø 18.0 mm(0.709 in)

Ø 5.3 mm(0.209 in)

Ø 5.3 mm(0.209 in)

103

mm

(

4.06

in)

50.0

mm

(1

.97

in )

26 m

m

(1.0

2 in

)

37.0

mm

(1

.457

in)

Ø 11.998 -11.993 mm(0.472 - 0.477 in)

Ø 13.95 mm(0.550 in)

Ø 24.8 mm(0.9764 in)

Ø 40.0 mm(1.575 in)

92 m

m

(

3.62

in)

85 m

m

(3

.35

in)

Ø 24

.995

- 25

.000

mm

(0.9

841

- 0.3

843

in)

Ø 13

.990

-13.

996

mm

(0.5

508

- 0.5

510

in)

Ø 14

.996

-14.

998

mm

(0.5

504

- 0.5

905

in)

1/4 in BSF 1/4 in BSF 1/4 in BSF

MS8/T MS9/T MS11/T MS18/T

1/4 in BSF

Ø 30 mm(1.18 in)

1/4in BSF 1/4in BSF 1/4in BSF

Ø 30 mm(1.18 in)

Ø 9.497 - 9.524 mm(0.3739 - 0.3750 in)



C-C

ON, INC.

1-37

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

CMM cables

Manual probe head cablesCable Type Overall length Machine connector Part number Price

PL1(T) Coiled 315 mm – 730 mm (12.4 in – 28.7 in) 5 pin DIN A-1016-0004 $97



PL4(T) Plain 4510 mm (177.6 in) 5 pin DIN A-1016-0001 $97

PL14 Coiled 595 mm – 1830 mm (23.4 in – 72 in) 7 pin AMPHENOL A-1016-0003 $108

PL17(T) Coiled 200 mm – 400 mm (7.9 in – 15.8 in) 14 pin LEMO A-1023-7024 $243

PL18(T) Coiled 500 mm – 1300 mm (19.7 in – 51.2 in) 14 pin LEMO A-1023-7025 $243

PL27(T) Coiled 203 mm (8 in) 5 pin MOLD – 5 pin MOLD A-1016-6370 $57

PL27(T) Plain 152 mm (6 in) 5 pin MOLD – 5 pin MOLD A-1016-6440 $57

Motorized probe head cablesCable Type Overall length Machine connector Part number Price

PL5(U) Coiled 0.4 m – 0.8 m (16 in – 31 in) PH9/10 to machine cable A-1016-7672 $271

PL6(U) Coiled 0.8 m –1.6 m (31 in – 63 in) PH9/10 to machine cable A-1016-7673 $271

PL12(U) Plain 0.1 m (4 in) PH9/10 to machine cable A-1016-7674 $238

PL13(U) Coiled 0.1 m – 0.2 m (4 in – 8 in) PH9/10 to machine cable A-1016-7675 $238

PL33(U) Plain 3 m (118 in) PH9/10 to machine cable A-1023-7056 $311

PL93(U) Plain 0.1 m (4 in) PH10MQ to PLM7/7/8/9S A-1016-7676 $271

Machine cablesCable Type Overall length Machine connector Part number Price

PLM6(T) Plain 6 m (19 ft) PH10 cable to PHC10 controller (chassis) A-1016-7564 $156

PLM7(T) Plain 4 m (13 ft) PH10 cable to PHC10 controller (chassis) A-1016-7563 $156

PLM8(U) Plain 6 m (19 ft) PH10 cable to PHC10 controller (socket) A-1016-7677 $156

PLM9(U) Plain 4 m (13 ft) PH10 cable to PHC10 controller (socket) A-1016-7678 $156

Output cablesCable Type Overall length Machine connector Part number Price

PL7 Plain 3 m (118 in) 5 pin DIN to 5 pin DIN A-1029-0166 $57

PL15 Plain 4.5 m (177 in) 5 pin DIN, interface to CMM A-1004-0110 $68

PL26(T) Plain 0.6 m (23 in) PI200 to PHC9 (7 pin) A-1057-0132 $97

PL37 Plain 0.5 m (19 in) 7 pin DIN to 7 pin DIN A-1054-0003 $57

Multiwired cablesCable Type Overall length Description Part number Price

PL38V Plain 25 m (82 ft) Multiwired cable A-1016-7625 $859



PL45V Plain 1.8 m (5.9 ft) Multiwired cable A-1016-7629 $373

PL46V Plain 3.7 m (12 ft) Multiwired cable A-1016-7628 $441

PL56V Plain 12 m (39.3 ft) Multiwired cable A-1016-7626 $622

PL75V Plain 1 m (3.2 ft) IS1-2 extension cable A-1016-7644 $171



C-C

ON, INC.


1-38

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Adaptor/extension cablesCable Type Overall length Description Part number Price

PL9 Plain 0.6 m (23 in) Machine cable to probe interface cable A-1029-0182 $57

PL10 Plain 0.1 m (4 in) Machine cable to probe/head cable (5 pin) A-1029-0111 $85

PL22 Plain 0.3 m (12 in) Probe head cable adaptor (PL1S, 2S, 3S, 4S to

PI4-2, PI200 input) A-1057-0131 $57

PL23(T) 0.5 m (19 in) PI4-2, PI200 adaptor cable (machine cable to PHC9

extension cable PL82V to video interface) A-1057-0133 $85

PL97(S) Plain 0.1 m (4 in) SCR200 Y adaptor cable A-1016-7660 $226

PICS interconnection cablesCable Overall length Description Part number Price

PL24 5 m (16 in) PI200 or PI7-2 to CMM A-1016-0121 $151

PL25(T) 0.3 m (11 in) PI200 or PI7-2 to PHC10-2/ACC2-2 A-1016-0120 $151

PL70(V) 0.5 m (19 in) PI200 and PI7-2 interfaces A-1016-7634 $362

PL72 2 m (6.5 in) PI200 or PI7-2 to PHC10-2/ACC2-2 A-1016-7637 $151

PL76(S) 0.7 m (2.25 in) T cable A-1016-7643 $171



C-C

ON, INC.

1-39

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Extension barsNumber Description Material Length Diameter Part number Price

PEL1 M8 thread to M8 thread Aluminum 50 mm (1.97 in) 13 mm A-1047-3484 $284

PEL2 M8 thread to M8 thread Aluminum 100 mm (3.94 in) 18 mm – 13 mm A-1047-3485 $346

PEL3 M8 thread to M8 thread Aluminum 200 mm (7.87 in) 18 mm – 13 mm A-1047-3486 $363

PEL4 M8 thread to M8 thread Aluminum 300 mm (11.81 in) 13 mm A-1047-3487 $458

PECF1* M8 thread to M8 thread Carbon fi ber 50 mm (1.97 in) 13 mm A-1047-7065 $571



* These products are special order only. Please call Customer Service for details.

Knuckle jointNumber Description Part number Price

PK1 Knuckle joint A-1014-1720 $604

Autojoint extension bars Number Description Material Length Diameter Part number Price

PAA1 Autojoint to M8 thread Steel 30 mm (1.18 in) 25 mm – 18 mm A-1051-0417 $353

PAA2 Autojoint to M8 thread Aluminum 140 mm (5.51 in) 25 mm – 13 mm A-1051-0418 $451

PAA3 Autojoint to M8 thread Aluminum 300 mm (11.81 in) 25 mm – 13 mm A-1051-0419 $548

PAACF2* Autojoint to M8 thread Carbon fi ber 140 mm (5.51 in) 25 mm – 13 mm A-1051-0488 $981

PAACF3* Autojoint to M8 thread Carbon fi ber 300 mm (11.81 in) 25 mm – 13 mm A-1051-0493 $1,029

PAACF* Autojoint to M8 thread Carbon fi ber 400 mm (15.74 in) 25 mm – 14 mm A-1051-0513 $1,644

PAACF* Autojoint to M8 thread Carbon fi ber 450 mm (17.72 in) 25 mm – 14 mm A-1051-0394 $1,713

PEM1 Autojoint to autojoint Steel/aluminum 50 mm (1.97 in) 25 mm A-1076-0070 $972

PEM2 Autojoint to autojoint Steel/aluminum 100 mm (3.94 in) 25 mm A-1076-0071 $1,198

PEM3 Autojoint to autojoint Steel/aluminum 200 mm (7.87 in) 25 mm A-1076-0072 $1,424

PEM4 Autojoint to autojoint Steel/aluminum 150 mm (5.91 in) 25 mm (90°) A-1076-0073 $1,481

PEMCF1* Autojoint to autojoint Carbon fi ber 50 mm (1.97 in) 25 mm A-1051-0490 $765

PEMCF2* Autojoint to autojoint Carbon fi ber 100 mm (3.94 in) 25 mm A-1051-0443 $1,210

PEMCF3* Autojoint to autojoint Carbon fi ber 200 mm (7.87 in) 25 mm A-1051-0491 $1,438

PEMCF* Autojoint to autojoint Carbon fi ber 150 mm (5.91 in) 25 mm A-1051-1132 $1,375

* These products are special order only. Please call Customer Service for details.

ExtensionsThe extensions and knuckle joint are the primary means

of adding fl exibility to fi xed heads. Extensions provide

penetration into deep features, while the knuckle joint allows

inspection of angular features. The knuckle joint allows 360° in

the B axis and ±100° in the A axis.



C-C

ON, INC.


1-40

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Interfaces

PI4-2The PI4-2 interface is the basic interface for standard touch-trigger probes that

allows for a PICS or SSR output. The supply voltage is automatically detected.

The unit is usually free-standing but can be rack-mounted.

Application: TP1, MIP, TP2, TP20, TP6, TP6A, MH20, and MH20i

Power supply: 85 V – 264 V, 47 Hz – 66 Hz

Dimensions: Height 88 mm (3.46 in)

Width 146 mm (5.75 in)

Depth 183 mm (7.19 in)

Input: 9 way ‘D’ type socket

Compatibility: Output PICS/SSR


PI6The PI6 interface is used on the Brown & Sharpe Microval only. Connectors are

25 pin ‘D’ socket and plug. Please contact Renishaw for details.


PI7-2The PI7-2 interface is a dual-purpose probe interface designed to process signals

from the TP7M high-accuracy probe and standard touch-trigger probes (TP2,

TP20, TP6, and TP6A). Special auto-selecting electronics within the interface

allow the automatic use and exchange of all of these probes without any setting

changes to the interface.

The PI7-2 performs all the functions of the PI4 and PI9 interfaces, but has

additional features such as probe damping, probe inhibit, and emergency stop.

This interface can be either free-standing or rack-mounted.

Application: TP7, TP2, TP6, TP6A, TP20, MH20, and MH20i

Power supply: 85 V – 135 V, 50/60 Hz

170 V – 270 V, 50/60 Hz



Depth 208.5 mm (8.21 in)


TP7M input: 15 way double density ‘D’ type socket or

9 pin ‘D’ type socket

Compatibility: Output TTL(PICS)/SSR 5 pin DIN socket

(PICS-9 pin ‘D’ type plug)

Cables Contact Renishaw




C-C

ON, INC.

1-41

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

PI200The PI200 interface can be interconnected within the majority of Renishaw’s

manual and motorized probing installations with no additional CMM

communications or control signalling required. Optimum performance will be

obtained on installations utilizing probe damping or halt signal facilities. Probe

signalling between TP200 and PI200 must be direct and uninterrupted. Probe

signal interfacing may be present within some CMM cabling arrangements. Call

Renishaw for further details.

Application: TP1, MIP, TP2, TP20, TP6, TP6A, TP200, MH20, and MH20i






Compatibility: Output PICS/SSR


IS1-2The IS1-2 interface selector is a fully-automatic system for use on CMM

installations requiring multiple sensor types (i.e. video, laser, analog, etc.). The

unit functions by identifying which probe has been fi tted to the probe head and

switches the probe signal/power lines to the appropriate interface. The unit is

confi gurable by inserting different programming modules.

Applications: TP7M, SP600M, TP2, TP20, TP6, TP200, SP25M, TP800





Input: 15 way double density ‘D’ type socket

Output: 15 way double density ‘D’ type plug and

9 way ‘D’ type plug (PICS)

Cables: Contact Renishaw


Interface accessories

HC2

Probe arm/disarm switch used with PI12 and PI4-2.


RPM01

Touch-trigger probe interface module.




C-C

ON, INC.


1-42

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Mounting bracketsRenishaw controllers and interfaces are supplied in two different types of

enclosures. Consult the drawings below to determine your bracket requirements

based upon the combination of products you are installing.

1. Small mounting plate Part number M-1018-0041

2. Enclosure link bracket kit Part number A-1018-0125

3. Rack mount bracket kit Part number A-1018-0124


2. Link (2 off) Part number M-1018-0040



2. Enclosure link bracket kit Part number A-1018-0126



2. 1/3 blanking panel kit Part number A-1018-0123

PHC10 or ACC2

PI4-2 orPI200 orOPI6 orPI7-2

PHC10 or ACC2

PHC9 orPHC10-2 orPHC50 orACC2


PHC9 orPHC50 orPHC10-2 orACC2-2

1

2

1

2

3PI7

3

1

2

3

1 2



C-C

ON, INC.

1-43

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s


2. Large mounting plate Part number M-1018-0042

1. Large mounting plate Part number M-1018-0042

1. 1/3 blanking panel kit Part number A-1018-0123

Description Part number Price

Small mounting plate M-1018-0041 $18

Large mounting plate M-1018-0042 $28

1/3 blanking panel kit A-1018-0123 $30

Rack mount bracket kit A-1018-0124 $23

Enclosure link bracket kit A-1018-0125 $23

Enclosure link bracket kit A-1018-0126 $23

PHC10 or ACC2

PI7 orPI800


1

1 2

1

1 1



C-C

ON, INC.


1-44

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Autochange systemRenishaw’s autochange equipment is the world’s fi rst integrated CMM probe

exchange system. Mounted within the CMM’s working envelope, autochange

facilitates fast, automatic probe exchange without the need for redatuming. In

addition, it provides covered storage for probes and extension bars.

ACR1 autochange rack with adjustable baseThe ACR1 is designed to accept the SP600 and SP25M as well as all other

Renishaw autojoint probes and extension bars (must be used in conjunction with

the horizontal mounting kit – see below). The rack is supplied with eight long

ports for maximum support. Where a probe greater than Ø25 mm is required, the

rack can be confi gured by the user by swapping a long port for a short port (see

below).

Number of stations: 8

Dimensions: 460 mm × 109 mm × 81 mm

This system can be mounted either horizontally or vertically.


Note: Adjustable base, legs and cable sold separately (see page 1-45).

Horizontal mounting kit

Includes: 1 × adjustable rack base

2 × 200 mm legs

2 × screws


Vertical mounting kit

Includes: 1 × support plate

8 × support pins (short)

8 × support pins (long)


ACC2-2 autochange controllerData transmission: Serial (RS232)

User-defi nable parameters: Baud rate 300–19200

Voltage range: 85 V–135 V, 170 V–275 V, 50/60 Hz

automatic selection


Width 290 mm (11.42 in)


Part number: A-1520-0101 Price: $2,959(RS232 version)



C-C

ON, INC.

1-45

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

ACR1 autochange system accessories

Adjustable rack base


Leg (100 mm)


Leg (200 mm)


Port replacement kits

All kits contain four ports.

Short port replacement kit


Long port replacement kit


Mixed port replacement kit

Contains two short and two long ports.


ACR1 autochange system cables

PL19 5 m cable


PL20 10 m cable


PL21 15 m cable


PL40 30 m cable




C-C

ON, INC.


1-46

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

ACR3 autochange rackThe ACR3 forms part of the modular rack system (MRS) and

is an autochange rack for probes and extension bars that

incorporate the Renishaw autojoint. The ACR3 is a four-port

mechanical design that traverses the MRS rail. Driven by the

motion of the CMM, it locks and unlocks the autojoint between

the probe and the probe head.

ACR3 4-port rack


Note: For 8-port applications, two 4-port racks can be connected

together. The 8-port confi guration requires the use of either the

MRS kit 2 or MRS kit 3 (see below).

MRS kits

Include: MRS rail (see below)

MRS feet (2)

125 mm legs (4)

Step back adaptors (2)

The MRS rail is available in 400 mm, 600 mm and 1000 mm

lengths.

MRS kit 1

400 mm long rail.


MRS kit 2

600 mm long rail.


MRS kit 3

1000 mm long rail.


Note: The MRS kits are compatible with FCR25, SCP600 and

ACR3.

MRS rails

Part number: A-4192-0050 (400 mm) Price: $205Part number: A-4192-0051 (600 mm) Price: $269Part number: A-4192-0052 (1000 mm) Price: $376



C-C

ON, INC.

1-47

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

ACR3 components

SCP600

Stylus change port for SP600.


MRS legs

Part number: A-4192-0061 (62.5 mm) Price: $86Part number: A-4192-0053 (125 mm) Price: $102

MRS heavy duty leg kit

Ø60 mm × 350 mm long. One leg per kit.


MRS adjustable foot plate


MRS leg and foot adaptor


MRS fi xed foot


MRS step back adaptor


M8 T nut *

Part number: P-NU18-0005 Price: $13

* no discounts



C-C

ON, INC.


1-48

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Manual autojoint probe standRenishaw’s manual autojoint probe stand (MAPS) is a low-

cost storage rack capable of holding up to six combinations

of probes, extension bars, and accessories. The stand can be

mounted directly on the table of a CMM using the appropriate

socket head bolt (maximum size M10, 3/8 in) which is passed

through the center of the base.

Standard autochange rack legs (100 mm and 200 mm long) are

compatible with this stand and can be stacked to accommodate

longer probe extensions with longer stylus extensions. As an

alternative to the support pillar, a wall mounting bracket is

available to enable the stand to be mounted to a cabinet, wall or

any other vertical surface.

Height: 285 mm

Depth: 80 mm

Width: 235 mm


MSR1 rackThe MSR1 rack is intended for use on either manual or DCC

CMMs to hold pre-qualifi ed stylus assemblies fi tted to TP20

or TP200 probe modules. The rack provides convenient

storage and protects the kinematic coupling mechanism from

contamination.

Overall height: 285 mm

Depth (inc wall bracket): 86 mm

Width: 236 mm

MSR1 with leg and base (wall mount kit included)




C-C

ON, INC.

1-49

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Datum sphereThe Renishaw universal datum sphere enhances the performance of manual and fully

automated CMMs. It allows for quick and easy adjustment to set ball stem over a wide range

of probe datuming angles. This enables datuming above, centrally and below the ball. Each

datum sphere is supplied with its own certifi cate, giving ball diameter and roundness. All

sphere measurements are performed on equipment traceable to UK (NPL) standards.

Specifi cations: Hard-wearing tungsten carbide sphere (ball) available in

fi ve sizes

Metric: Ø12 mm, Ø19 mm and Ø25 mm

Inch: Ø3/4 in and Ø1 in

Sphericity: to within 0.1 µm (0.000004 in)

Diametric tolerance: ±1 µm (0.00004 in)

Datum sphere kit

Includes: 1 datum ball (selected by size)

Pivot pillar

Base

C spanner

Ball certifi cate

Storage box


Ø12 mm ball A-1034-0028 $492

Ø19 mm ball A-1034-0027 $492

Ø25 mm ball A-1034-0026 $492

Ø3/4 in ball A-1034-0031 $492

Ø1 in ball A-1034-0035 $492

Datum sphere fi xing studs

A fi xing stud is required with each kit to attach the pillar to the table surface. Select one from

the list below.

Description Manufacturer Part number Price

M6 × 1 M-1034-0016 $27

M8 × 1.25 MTI M-1034-0015 $27

M10 × 1.5 B&S, LK Tool & Sheffi eld M-1034-0014 $27

5/16–18 UNC M-1034-0018 $27

3/8–16 UNC Carl Zeiss, Fanamation, LK Tool, & L.S. Starrett M-1034-0017 $27

Datum sphere accessories (M6 thread – stem is attached to the ball)


Ø12 mm datum ball A-1034-0005 $282

Ø19 mm datum ball A-1034-0023 $282

Ø25 mm datum ball A-1034-0002 $282

Ø3/4 in datum ball A-1034-0032 $282

Ø1 in datum ball A-1034-0036 $282

2 way adaptor M-1034-0042 $82

3 way adaptor * M-1034-0052 $186

Pillar extension 75 mm (2.96 in) long M-1034-0019 $82

* Special order



C-C

ON, INC.


1-50

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Mahogany boxes

Probe head boxes


PH1 probe head, cable, TK6 box A-1015-7725 $100

PH6 probe head, TP2 probe, stylus, TK6 box A-1015-7731 $100

PH5 or PH5-1 probe head, cable, TK6 box A-1015-7727 $100

PH10M probe head kit box A-1015-7698 $108

PH6A probe head kit box A-1015-7674 $198

TP1 probe and stylus box (PC10) A-1015-7686 $136

MIH and accessories box A-1015-7765 $113

TP200 probe and stylus box A-1015-7869 $135

Extension bar boxes


PEL extension bars (PC19) A-1015-7694 $113

PEM extension bars A-1015-7761 $131

Probe extension kitsKit EKL Part number: A-1047-7005 Price: $994

Description Quantity Part numberLightweight extension bar (50 mm) PEL1 1 A-1047-3484Lightweight extension bar (100 mm) PEL2 1 A-1047-3485Lightweight extension bar (200 mm) PEL3 1 A-1047-3486Double-ended spanner 1 A-1047-3932Box 1 A-1015-7694

PEM Kit Part number: A-1076-0100 Price: $3,305

Description Quantity Part numberMultiwire extension bar (50 mm) PEM1 1 A-1076-0070Multiwire extension bar (100 mm) PEM2 1 A-1076-0071Mulitwire extension bar (200 mm) PEM3 1 A-1076-0072Joint key 1 A-1051-0040Box 1 A-1015-7761



C-C

ON, INC.

1-51

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Stylus tools

S1 C spanner


S3 hex key 1.5 mm A/F

Part number: P-TL01-0150 Price: $4

S4 hex key 3.0 mm straight arm


S5 wrench 2 mm A/F




S7 stylus tool (used with M2 and M3 styli)


S9 double-ended spanner


S10 joint key




S20 torque tool


M4 stylus tool (used with M4 and M5 styli)


Stylus tool for use with adaptor M-5000-9301




C-C

ON, INC.


1-52

Coo

rdin

ate

mea

surin

g m

achi

ne p

robe

s

Renishaw servicesRenishaw has set up a series of part numbers which

should be referenced when ordering Renishaw services.

These part numbers will appear on your invoice.

Part number Description Price

RI-6002-0001 CMM hourly labor $110/hour

RI-6002-0002 CMM hourly travel $60/hour

RI-6002-0003 CMM expenses as incurred

RI-6002-0004 CMM in-house training $450/day

Tool kitsTK1 tool kit

The TK1 tool kit is included with the MP1, MP3, MP4, MP7,

MP8, MP9, MP10, MP11, MP12, MP14, MP700, and LP2

probes.

Includes: Stylus tool Ø1.98 mm Hex key 1.5 mm A/F Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Hex key 4.0 mm A/F


TK3 tool kit

The TK3 tool kit is included with the M6-3 probe.

Includes: Stylus tool Ø1.98 mm Hex key 1.5 mm A/F Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Hex key 4.0 mm A/F Hex key 5.0 mm A/F


TK4 tool kit

Includes: S7 stylus tool (2) Hex key 1.5 mm A/F Hex key 2.5 mm A/F


TK5 tool kit

Includes: S7 stylus tool (2) S8 spanner C spanner Double-ended spanner Hex key 1.5mm A/F


TK6 tool kit

Includes: Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F


TK7 tool kit

Includes: Joint key S7 stylus tools (2) Hex key 1.5 mm A/F




C-C

ON, INC.

Machine tool probes

Section 2

Machine tool Issue 15.indd 2-1Machine tool Issue 15.indd 2-1 30/07/2008 09:53:3530/07/2008 09:53:35


C-C

ON, INC.

Machine tool probes

2-2

Mac

hine

tool

pro

bes

Inspection probes for machining centers

MP1 probe systemThe MP1 is ideal for small machining center applications, and utilizes either hard-

wired or inductive transmission. Inductive transmission allows for automatic tool

changing of the probe, as both power and probe signals are transmitted across a

small air gap.

Sense directions ±X, ±Y, +Z

Stylus overtravelX and Y: ±17.5°

Z: 8 mm (0.31 in)

Stylus trigger force (factory set using 50 mm stylus)

X and Y: 57 gf – 115 gf

Z: 380 gf

Unidirectional repeatability (max 2 sigma value)

1.0 µm (0.00004 in)

The MP1 probe is available in two versions:

• MP1/S with side electrical connection

• MP1/R with rear electrical connection

MP1/S probe

Includes: MP1/S probe head with seal

Ø8 ball

4 socket cap head screws (probe to shank) M4 × 0.7, 30 mm long

TK1 probe head tool kit


MP1/R probe

Includes: MP1/R probe head with seal

Ø8 ball

4 socket cap head screws (probe to mounting) M4 × 0.7, 30 mm long





C-C

ON, INC.

2-3

Mac

hine

tool

pro

bes

MP1 inductive transmission systemUsing the inductive system, the probe unit has no external wiring and may

be freely transferred between the tool changer and machine spindle. The

transmission modules pass power and signals across an air gap between the

probe-mounted IMP (inductive module probe) and the machine-mounted IMM

(inductive module machine).

IMP inductive module probe for MP1

Use the following table to order the appropriate IMP for your machining center,

adding the prefi x A-2028- to the number below to form the complete part number.

Example: If dimension J is 25 and dimension K is 60, the part number will be

A-2028-7773.

Part number: A-2028-nnnn (see table below) Price: see Section 7

Dimension J

20 25 30 35 40 45 50 55 60 65 70

(0.78) (0.98) (1.18) (1.37) (1.57) (1.77) (1.96) (2.16) (2.36) (2.55) (2.75)

40 (1.57) 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714

45 (1.77) 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731

50 (1.96) 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748

55 (2.16) 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765

60 (2.36) 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782

65 (2.55) 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799

70 (2.75) 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816

75 (2.95) 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833

80 (3.15) 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850

85 (3.34) 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867

90 (3.54) 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884

95 (3.74) 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901

100 (3.93) 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918

105 (4.13) 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935

110 (4.33) 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952

115 (4.52) 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969

Dimensions in mm (inches)

Dim

ensi

on

K



C-C

ON, INC.

Machine tool probes

2-4

Mac

hine

tool

pro

bes

IMM assemblies for MP1

Side exit with 8 mm (0.31 in) O.D. steel tube conduit fi tting.

Complete with 5 m (16.4 ft) long cable.


As above, but with 10 m (32.8 ft) long cable (for Mazak).







Side exit with 11 mm (0.43 in) O.D. fl exible conduit fi tting.






Rear exit, with 5 m (16.4 ft) long cable.


Cylindrical assembly, 20 mm long with cable outlet of Ø6 mm.








C-C

ON, INC.

2-5

Mac

hine

tool

pro

bes

IMM accessories and replacement parts

Sealtite conduit

¼ in conduit, 5 ft long. Includes one fi tting.

Part number: SEALTITE, 7455 Price: $23

IMM screw

M4 × 20 mm screws are included with items when required for assembly, but

replacements may be requested at no charge.

Part number: P-SC01-0420 Price: FOC

Setting disk


Spacers

Spacers can be used on all IMMs. Note that longer screws may be required when

spacers are used.

Part number: M-2028-7576 (1 mm thick) Price: $36Part number: M-2028-7577 (3 mm thick) Price: $36

Junction box

The junction box allows you to run cable from both the IMM and the interface to

this meeting point. If the IMM needs to be removed from the machine temporarily,

only a cable from the junction box to the IMM has to be removed.


MI5 interface




C-C

ON, INC.

Machine tool probes

2-6

Mac

hine

tool

pro

bes

MP1 accessories

MA1 probe adaptor


MA1/R probe adaptor


MP1/R 3-way mounting block


MP1 replacement parts

MP1/S probe seal


MP1/R probe seal


Outer diaphragm replacement kit


TK1 tool kit


M4×30 screws

Used with MA1 adaptor.




C-C

ON, INC.

2-7

Mac

hine

tool

pro

bes

MP3 probe systemThe MP3 is ideal for applications on larger machining centers. Its

size gives exceptional robustness and generous stylus overtravel,

while maintaining its high precision. The MP3 probe signals are

transmitted to the machine control by either an inductive or an

optical transmission system.



Z: 17 mm (0.67 in)


X and Y: 75 gf – 150 gf

Z: 490 gf


1.0 µm (0.00004 in)

MP3 probe

Includes: MP3 probe head

4 socket cap head screws (probe to housing)

M4 × 0.7, 35 mm long



MP3 probe shown with IMM and IMP

(inductive transmission)



C-C

ON, INC.

Machine tool probes

2-8

Mac

hine

tool

pro

bes

MP3 inductive transmission system (IMP/MH3 housing assembly)Using the inductive system, the probe unit has no external wiring and may

be freely transferred between the tool changer and machine spindle. The

transmission modules pass power and signals across an air gap between

the probe-mounted IMP (inductive module probe) and the machine-mounted

IMM (inductive module machine).

IMP inductive module probe for MP3

Use the following table to order the appropriate IMP for your machining

center, adding the prefi x A-2003- to the number below to form the complete

part number.

Example: If dimension R is 55 and dimension L is 10, the part number will

be A-2003-7603.

Part number: A-2003-nnnn (see table below) Price: see Section 7

Dimension L

5 10 15 20 25 30 35 40 45 50 55 60

(0.19) (0.39) (0.59) (0.78) (0.98) (1.18) (1.37) (1.57) (1.77) (1.96) (2.16) (2.36)

55 (2.16) 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613

60 (2.36) 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632

65 (2.55) 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651

70 (2.75) 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670

75 (2.95) 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689

80 (3.15) 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708

85 (3.34) 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727

90 (3.54) 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746

95 (3.74) 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765

100 (3.93) 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784

105 (4.13) 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803

110 (4.33) 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822

115 (4.52) 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841

Dimensions in mm (inches)

Dim

ensi

on

R



C-C

ON, INC.

2-9

Mac

hine

tool

pro

bes

IMM assemblies for MP3















Includes a 19 A/F conduit adaptor. Complete with 5 m (16.4 ft)

long cable.


Rear exit, with 5 m (16.4 ft) long cable.










C-C

ON, INC.

Machine tool probes

2-10

Mac

hine

tool

pro

bes

IMM accessories and replacement parts

Sealtite conduit



IMM screw

M4 × 20 mm screws are included with items when required for

assembly, but replacements may be requested at no charge.


Setting disk


Spacers

Spacers can be used on all IMMs. Note that longer screws may

be required when spacers are used.

Part number: M-2028-7576 (1 mm thick) Price: $36

Part number: M-2028-7577 (3 mm thick) Price: $36

Junction box

The junction box allows you to run cable from both the IMM

and the interface to this meeting point. If the IMM needs to be

removed from the machine temporarily, only a cable from the

junction box to the IMM has to be removed.





Front cover for MP3 probe


TK1 tool kit


M4×35 screw for MP3 probe module


M3×8 screw for MP3 front cover


M4×30 screws for MA3-3


9 V alkaline battery

Part number: P-BT03-0001 Price: $4



C-C

ON, INC.

2-11

Mac

hine

tool

pro

bes

MP11The MP11 is a hard-wired probe ideal for small machine

tools with manual tool changing. The probe is mounted in the

machine spindle with the signal transmission cable connected

to the machine control. With the MP11, the illuminated

LED switches off every time the probe stylus contacts the

workpiece.



Z: 8 mm (0.31 in)


X and Y: 50 gf – 150 gf

Z: 180 gf – 700 gf


1.0 µm (0.00004 in)

MP11 retrofi t kit

Includes: MP11 probe with cable and connectors

Remote socket kit

50 mm and 100 mm ceramic styli

Renishaw Inspection Plus software

Installation and applications support

A shank (tool holder) is not included in this kit. See the

section entitled Shanks and toolholders for price and part

number information.

Part number: MP11-NS-S (Available at fi xed price) Call for details

Note: The retrofi t questionnaire at the end of this section

must be fi lled out and returned to Renishaw before a retrofi t

order can be processed.

MP11 hardware only kit


Remote socket kit


A shank (tool holder) is not included in this kit. See the

section entitled Shanks and toolholders for price and part

number information.

Part number: MP11-NS-KIT Price: $3,558

MP11 probe




Spare MP11 cable


4 pin connector for MP11 cable

Part number: MP11 PLUG KIT Price: $64

4 pin socket for MP11

Part number: P-CN21-0304 Price: $57

Outer diaphragm kit




C-C

ON, INC.

Machine tool probes

2-12

Mac

hine

tool

pro

bes

MP15The MP15 probe is used on small CNC machines with limited Z travel and

manual tool changing.

The probe is mounted in the machine spindle with the signal transmission cable

connected to the machine control. With the MP15, the illuminated LED switches

off every time the probe stylus contacts the work piece.

MP15 hard-wired probe kit


MP15/MP11 adaptor


MI8 interface




C-C

ON, INC.

2-13

Mac

hine

tool

pro

bes

MP700The MP700 is an optical transmission part probing system for

use on machining centers. The MP700 is specifi cally designed to

deliver high-accuracy CMM type probe performance. The MP700

uses strain gage sensors and and an internal microprocessor to

provide a solid state sensor mechanism with unprecedented life

and reliability. Low trigger force and consistent pre-travel results

in high accuracy with long styli.

The MP700 is available with either 35° or 70° output. An M code

must be supplied to turn the probe on. An internal timer or M

code is used to turn the probe off.



Z: 11 mm (0.45 in)


X and Y: 2 gf

Z: 15 gf


0.25 µm (0.00001 in)

MP700 retrofi t kitIncludes: MP700 probe with 70° OMP

OMM

OMM mounting bracket

MI12 interface

50 mm and 100 mm carbon fi ber styli

Sealtite conduit


TK1 tool kit



A shank (tool holder) is not included in this kit. See the section

entitled Shanks and toolholders for price and part number

information.

Part number: MP700-NS-S (Available at fi xed price) Call for details

Note: The retrofi t questionnaire at the end of this section must

be fi lled out and returned to Renishaw before a retrofi t order can

be processed.

MP700 hardware only kitIncludes: MP700 probe with 70° OMP

OMM


MI12 interface


Sealtite conduit


TK1 tool kit

A shank (tool holder) is not included in this kit. See the section


information.

Part number: MP700-NS-KIT Price: $6,940

MP700 probe

Includes: MP700 probe

Adjusting plate


Tool kit

Part number: A-2107-0035 (35°) Price: $4,564Part number: A-2107-0070 (70°) Price: $4,564

MP700 probe module


MP700 OMP only

Part number: A-2107-0036 (35°) Price: $849Part number: A-2107-0071 (70°) Price: $849

OMM optical receiver




MI12 interface


Sealtite conduit





C-C

ON, INC.

Machine tool probes

2-14

Mac

hine

tool

pro

bes

OMP40The OMP40 is an ultra-compact optical transmission part

probing system. Measuring just 40 mm diameter and 50 mm

in length, the OMP40 is suitable for all machining and mill-

turn centers. Utilizing a revised state-of-the-art modulated

optical transmission method, the system offers the highest

level of resistance to light interference when used with the

OMI-2/OMI-2T. The OMP40 probe is also compatible with

existing OMM/MI12 and OMI receivers, enabling current

MP7, MP8, MP9 and MP10 system users to benefi t from its

innovative features.



Z: 6 mm (0.23 in)


X and Y: 50 gf – 90 gf

Z: 585 gf


1.0 µm (0.00004 in)

OMP40 retrofi t kit

Includes: OMP40 probe

OMM


MI12 interface


Sealtite kit



A shank (tool holder) is not included in this kit. See section


information.

Part number: OMP40-NS-S (Available at fi xed price) Call for details




OMP40 hardware only kit


OMM


MI12 interface


Sealtite kit

Part number: OMP40-NS-KIT Price: $6,113

OMP40 probe kit

Includes: OMP40

½ AA battery (2)

Tool kit




OMI-2 optical receiver


OMI-2T optical receiver


OMM or OMI-2 mounting bracket


MI12 interface


Sealtite conduit for OMM



Sealtite conduit for OMI-2 or OMI-2T

5/16 in conduit, 1 meter long. Includes one fi tting.


OMP40 upgrade kit

Current users of MP7, MP8, MP9 or MP10 optical transmission

probes may upgrade to OMP40. A complete working system (probe

module plus transmission system) must be exchanged.

Includes: OMP40 probe system

Part number: RI-4071-0001 Price: $1,902

OMP40 accessories and replacement parts

½AA battery (2 pack)


MP10 style shank adaptor




C-C

ON, INC.

2-15

Mac

hine

tool

pro

bes


Stylus overtravelX and Y: ±18°

Z: 11 mm (0.43 in)


X and Y: 2 gf

Z: 15 gf


0.25 µm (0.00001 in)

OMP400 retrofi t kitIncludes: OMP400 probe

OMM


MI12 interface


Sealtite kit



A shank (tool holder) is not included in this kit. See section entitled

Shanks and toolholders for price and part number information.

Part number: OMP400-NS-S (Available at fi xed price) Call for details

Note: The retrofi t questionnaire at the end of this section must be fi lled

out and returned to Renishaw before a retrofi t order can be processed.

OMP400 hardware only kitIncludes: OMP400 probe

OMM


MI12 interface


Sealtite kit


OMP400 probe kitIncludes: OMP400 probe

½ AA battery (2)

Tool kit






OMI-2T optical receiverPart number: A-5439-0049 Price: $1,582

OMM or OMI-2 mounting bracketPart number: A-2033-0830 Price: $119

MI12 interfacePart number: A-2075-0142 Price: $931

Sealtite conduit for OMM¼ in conduit, 5 ft long. Includes one fi tting.


Sealtite conduit for OMI-2 or OMI-2T5/16 in conduit, 1 m long. Includes one fi tting.


To obtain optimal metrology performance, the following

carbon fi ber styli are recommended. Refer to the Styli

section for more details.

Stylus Part number Price

6 × 50 mm CF A-5003-7306 $128

6 × 100 mm CF A-5003-6510 $145

6 × 150 mm CF A-5003-6511 $274

6 × 200 mm CF A-5003-6512 $289

OMP400 upgrade kitCurrent users of MP700 optical transmission probes

may upgrade to OMP400. A complete working system

(probe module plus transmission system) must be

exchanged.



Note: A new shank is required. See section entitled

Shanks and toolholders for price and part number

information.

OMP400OMP400 is the latest generation optical probe using strain gage technology.

Measuring just 40 mm diameter × 50 mm in length, OMP400 is suitable

for all machining and mill-turn centers requiring uncompromised 3D

metrology performance. Utilizing a revised state-of-the-art modulated optical

transmission method, the system offers the highest level of resistance to light

interference when used with OMI-2. The OMP400 probe is also compatible

with existing OMM/MI12 and OMI receivers, enabling current MP7, MP8,

MP9 and MP10 system users to benefi t from its innovative features.



C-C

ON, INC.

Machine tool probes

2-16

Mac

hine

tool

pro

bes

OMP60OMP60 is the next generation optical transmission probing system

suitable for medium to large machining and mill-turn centers. Utilizing

a revised state-of-the-art modulated optical transmission method, the

system offers the highest level of resistance to light interference. The

OMP60 probe is also compatible with existing OMM/MI12 and OMI

receivers. OMP60 also supports all methods of probe activation – shank

switch, spin and M code – enabling current MP7, MP8, MP9 and MP10

users to benefi t from some of its innovative features.



Z: 11 mm (0.43 in)


X and Y: 75 gf – 140 gf

Z: 530 gf


1.0 µm (0.00004 in)

OMP60 retrofi t kit


OMM


MI12 interface


Sealtite kit





Part number: OMP60-NS-S (Available at a fi xed price) Call for details



OMP60 hardware only kit


OMM


MI12 interface


Sealtite kit




OMP60 probe kit


AA battery (2)

Tool kit








OMM or OMI-2 mounting bracket


MI12 interface


Sealtite conduit for OMM



Sealtite conduit for OMI-2 or OMI-2T

5/16 in conduit, 1 m long. Includes one fi tting.


OMP60 upgrade kit

Current users of MP7, MP8, MP9 or MP10 optical

transmission probes may upgrade to OMP60. A

complete working system (probe module plus

transmission system) must be exchanged.

Includes: OMP60 probe system




C-C

ON, INC.

2-17

Mac

hine

tool

pro

bes1 – OMP60M transmission module


2 – OMP60M probe module


3 – OMP60M 100 mm extension






6 – OMP60M LP2 adaptor


7 – LPE3 150 mm extension






10 – MA4 90° adaptor


11 – LP2 probe assembly


12 – OMP60M 3-way adaptor


13 – OMP60M probe module adaptor


14 – MP3 probe


15 – Shorting cover


OMP60M upgrade kitCurrent users of MP7, MP8, MP9 or MP10 optical

transmission probes may upgrade to OMP60M. A

complete working probe must be exchanged.

Includes: OMP60M module

OMP60M probe module


1

3 6

2

4

12

5

13

14

11

7

8

9

10

OMP60M (special order)OMP60M is a modular version of the OMP60. The OMP60M,

probe module, adaptors and extensions need to be purchased

separately.

15



C-C

ON, INC.

Machine tool probes

2-18

Mac

hine

tool

pro

bes

RMP60RMP60 is the latest generation of radio transmission part probing system

ideal for use on all machine tools. RMP60 features an integrated probe

module delivering exceptional robustness and generous overtravel.

RMP60 complies with FCC regulations and operates in the 2.4 GHz

range. RMP60 delivers interference-free transmission through the use of

FHSS (frequency hopping spread spectrum).

RMP60 supports three methods of probe activation:

Radio-on The probe is turned on via an RF signal produced by the RMI

and initiated by an M code. The probe is turned off via an RF

signal or the internal timer.

Spin-on The probe is turned on via an internal centrifugal switch. The

probe is turned off via the centrifugal switch or the internal

timer.

Switch-on The probe is turned on and off via a switch incorporated

into the shank, activated when the probe is loaded into the

spindle.



Z: 11 mm (0.43 in)


X and Y: 75 gf – 140 gf

Z: 530 gf


1.0 µm (0.00004 in)

RMP60 retrofi t kit

Includes: RMP60 probe and transmission system

RMI radio machine interface

RMI mounting bracket


Sealtite kit





Part number: RMP60-NS-S (Available at a fi xed price) Call for details



RMP60 hardware only kit

Includes: RMP60 probe and transmission system




Sealtite kit

Part number: RMP60-NS-KIT Price: $8,085

RMP60 probe kit

Includes: RMP60 probe

AA battery (2)

Tool kit




RMI 30 m extension cable






RMI antenna cover


Sealtite conduit



RMP60 upgrade kit

Current users of MP14, MP16 or MP18 radio probes

may upgrade to RMP60. A complete working system

(MP3 probe, transmission system, MI14 or MI16

interface and RMM antennas) must be exchanged.




Sealtite kit




C-C

ON, INC.

2-19

Mac

hine

tool

pro

bes1 – RMP60M transmission module


2 – RMP60M probe module


3 – RMP60M 100 mm extension






6 – RMP60M LP2 adaptor








10 – MA4 90° adaptor


RMP60M (special order)RMP60M is a modular version of the RMP60.

The RMP60M, probe module, adaptors and

extensions need to be purchased separately.

RMP60 complies with FCC regulations and

operates in the 2.4 GHz range.

11 – LP2 probe assembly


12 – RMP60M 3-way adaptor


13 – RMP60M probe module adaptor


14 – MP3 probe


15 – Shorting cover


RMP60M upgrade kitCurrent users of MP14, MP16 or MP18 radio probes may

upgrade to RMP60M. A complete working system (probe, MI14

or MI16 interface and RMM antennas) must be exchanged.

Includes: RMP60M module

RMP60M probe module



Sealtite kit


1

3 6

2

4

12

5

13

14

11

7

8

9

10

15



C-C

ON, INC.

Machine tool probes

2-20

Mac

hine

tool

pro

bes

RMP600 (available winter 2008/2009)RMP600 is the latest generation compact radio transmission probe using

strain gage technology. Measuring only 63 mm in diameter and 76 mm

in length, with an omni-directional transmission distance of 15 m, it is

ideal for use on all machine tools. RMP600 features an integrated probe

module delivering exceptional robustness and generous overtravel.

It delivers interference-free transmission through the use of FHSS

(frequency hopping spread spectrum). RMP600 complies with FCC

regulations and operates in the 2.4 GHz range.

RMP600 supports three methods of probe activation:

Radio-on The probe is turned on via an RF signal produced by the RMI

and initiated by an M code. The probe is turned off via an RF

signal or the internal timer.

Spin-on The probe is turned on via an internal centrifugal switch. The

probe is turned off via the centrifugal switch or the internal

timer.

Switch-on The probe is turned on and off via a switch incorporated

into the shank, activated when the probe is loaded into the

spindle.



Z: 11 mm (0.43 in)


X and Y: 30 gf

Z: 489 gf

Unidirectional repeatability 0.25 µm (0.00001 in)

RMP600 retrofi t kit





Sealtite kit


Installation and application support



Part number: RMP600-NS-S (Available at a fi xed price) Call for details



RMP600 hardware only kit





Sealtite kit

Part number: RMP600-NS-KIT Price: $10,032

RMP600 probe kit


AA battery (2)

Tool kit










RMI antenna cover


Sealtite conduit



RMP600 upgrade kit

Current users of MP14, MP16 or MP18 radio probes

may upgrade to RMP600. A complete working system

(MP3 probe, transmission system, MI14 or MI16

interface and RMM antennas) must be exchanged.




Sealtite kit




C-C

ON, INC.

2-21

Mac

hine

tool

pro

bes

CP1 contact inspection probeThe CP1 probe is used on CNC machining centers to perform workpiece set-up

and inspection. It is triggered through a conductive stylus via an electronically

isolated machine spindle. This system is usually designed into the machine by

the OEM. Consult with your OEM to be sure the interface is available before

ordering this product.



Z: 7 mm (0.27 in)


1.0 µm (0.00004 in)

CP1 probe kits

Includes: CP1 probe

Shank (see below)

Retention knob

PS3-1T 50 mm stylus

Stylus tool

Part number: A-2012-0001 (CAT 40) Price: $2,195Part number: A-2012-0002 (CAT 50) Price: $2,255Part number: A-2012-0003 (BT 40) Price: $2,195Part number: A-2012-0004 (BT 50) Price: $2,255

CP1 probe (module only)


CP1 probe adjustment module


Conductive styli

For use primarily with CP1 probe. Ball diameter 5 mm (0.20 in).

Overall gage length 50 mm (1.97 in)








C-C

ON, INC.

Machine tool probes

2-22

Mac

hine

tool

pro

bes

Shanks/toolholdersA shank is required with each probe to mount it to a

machining center. A shank is already included with the

MP8 probe.

Shanks for MP7 and MP9 probes


M-2033-6439 CAT 40 $368

M-2033-6440 CAT 45 $368

M-2033-6441 CAT 50 $368

M-2033-6445 BT 40 $368

M-2033-6446 BT 45 $368

M-2033-6447 BT 50 $368

Shanks for OMP60, MP11, MP12, MP700, RMP60 and RMP600 (spin-on, radio-on) systems


M-2045-0068 CAT 30 $368

M-2045-0069 CAT 40 $368

M-2045-0138 CAT 45 $368

M-2045-0071 CAT 50 $368

M-2045-0292 CAT 60 $1,700

M-2045-0077 BT 30 $368

M-2045-0027 BT 40 $368

M-2045-0038 BT 45 $368

M-2045-0073 BT 50 $368

M-2045-0186 HSK shank A40 $693

M-2045-0187 HSK shank A50 $826

M-2045-0188 HSK shank A63 $887

M-2045-0189 HSK shank A80 $1,074

M-2045-0190 HSK shank A100 $1,077

A-2045-0243 1/2 in straight shank $218

A-2030-0252 1 in straight shank $218

A-2030-0211 25 mm straight shank $218

M-2045-0346 CAPTO C5 $995

M-2045-0310 CAPTO C6 $676

M-2045-0311 CAPTO C8 $1,708

M-2045-0335 KM63 $1,388

M-2045-1831591 KM63Y (Mazak) $1,388

Shanks for OMP40 and OMP400


M-4071-0050 CAT 30 $413

M-4071-0058 CAT 40 $368

M-4071-0072 CAT 50 $520

M-4071-0049 BT 30 $425

M-4071-0057 BT 40 $368

M-4071-0048 ISO30 DIN69871 $413

M-4071-0129 HSK A63 $568

M-4071-0069 ISO40 DIN69871 $395

M-4071-0044 HSK E25 $482

M-4071-0045 HSK A32 $482

M-4071-0055 HSK E32 $482

M-4071-0046 HSK A40 $482

M-4071-0054 HSK E40 $482

M-4071-0047 HSK A50 $649

M-4071-0066 CAPTO C5 $822

M-4071-0067 CAPTO C6 $822

M-4071-0065 KM63 $822

OMP40 and OMP400 shank kits

CAT 40 shank kit

Includes: CAT 40 shank

MP10 shank adaptor

Part number: M-4071-0058-RI Price: $539

BT 40 shank kit

Includes: BT 40 shank

MP10 shank adaptor

Part number: M-4071-0057-RI Price: $539

Calibration masters

Calibration tools

Part number: M-2253-0954 (CAT 40) Price: $431Part number: M-2253-0955 (CAT 50) Price: $539Part number: M-2253-1263 (BT 40) Price: $431Part number: M-2253-1262 (BT 50) Price: $539

2 inch ring gage

Part number: SPI-30078-H Price: $193

0.5 inch gage pin

Part number: VSX-0500-E Price: $54



C-C

ON, INC.

2-23

Mac

hine

tool

pro

bes

Tool setting probes for machining centers

MP4The MP4 tool setting probe is table-mounted on CNC machining centers. The

MP4 is available with side or rear exit cable.



Z: 8 mm (0.31 in)


X and Y: 75 gf – 140 gf

Z: 490 gf


1.0 µm (0.00004 in)

MP4 probe

Part number: A-2054-3968 (side exit) Price: $3,364Part number: A-2054-6373 (rear exit) Price: $3,364

MI8 interface





TK1 tool kit


MP4 chip shield




C-C

ON, INC.

Machine tool probes

2-24

Mac

hine

tool

pro

bes

NC3 tool setterNC3 is the second generation of non-contact tool setter. NC3

is available in a fi xed confi guration and offered in a single size.

NC3 is compact and designed to accommodate tools up to

80 mm diameter making it ideal for small to medium machining

centers and special applications.

Repeatability ±0.15 µm (0.000006 in)

Tool diameterMeasurement

Min: 0.20 mm (0.008 in)

Max: 80 mm (3.15 in)

Off-center 100 mm (3.94 in)

Breakage Min: 0.10 mm (0.0039 in)

NC3 fi xed system kit

Includes: NC3 fi xed unit with 10 m integral cable

NCi-4 interface

Air regulator kit

Ø17 mm OD × 4 m conduit

Mounting plate


NC3 fi xed unit only

Includes: NC3 fi xed unit with 10 m integral cable


NC3 fi xed system retrofi t kit

NC3 retrofi t kit includes all items above plus the following:

Tool setting software


Part number: NC3-F135-S Price: Call for details

NCi-4 interface


NC3 air regulator kit


NC3 air fi lter service kit

Part number: P-FI01-S002 Price: $147

Steel sheath conduit

Ø17 mm OD × 1 m length, for cable protection.

Part number: P-HO01-0008 Price: $23

45° mounting bracket


NC3 air nozzle kit




C-C

ON, INC.

2-25

Mac

hine

tool

pro

bes

NC4 tool setterNC4 is the latest generation of non-contact tool setter and our

most compact design. NC4 is available in fi xed or separate

confi gurations. NC4F (fi xed) is available in four different sizes.

NC4S (separate) systems are user-confi gurable operating

between 500 mm and 5 m.

Repeatability ±1.0 µm (0.00004 in)

Minimum tool diameter

Measurement 0.03 mm (0.0012 in)

Breakage 0.03 mm (0.0012 in)

NC4 fi xed system retrofi t kits

Include: NC4 fi xed unit with 12.5 m cable

NCi-4 interface

Air regulator kit

Ø22 mm OD steel braided conduit

Mounting plate



Part numbers: NC4-F300-Modular-S * NC4-F300-S * NC4-F230-S * NC4-F145-S * NC4-F115-S * NC4-F95-S *

NC4 separate system retrofi t kits

Include: NC4 separate unit with 12.5 m cable

NCi-4 interface

Air regulator kit

Ø17 mm OD steel braided conduit



Part numbers: NC4-S800-S * NC4-S1500-S * NC4-S2000-S * NC4-S3000-S * NC4-S5000-S *

Note: When ordering a separate system retrofi t kit, the

customer must select an NC4 based on its operating range. In

addition, the customer must select tool setting software based

on the control type. Brackets and an adjusting method (see

overleaf) are also needed for NC4 separate systems. These

are not included with NC4 separate systems and must be

ordered additionally. Mounting brackets for various machines

are continually developed. Contact Renishaw for the latest list

of compatibility. Bracket installation is not included with the

standard separate system retrofi t price, this service can be

quoted upon request.

* Available at a fi xed price. Call for details.

NC4 fi xed kits

NC4 F300/225 with NCi-4 kit

Separation 225 mm

Part number: NC4-F300-Modular-kit Price: $4,781


Separation 240 mm

Part number: NC4-F300-kit Price: $4,781


Separation 170 mm



Separation 85 mm



Separation 55 mm



Separation 23 mm


NC4 separate kits

NC4 S800 with NCi-4 kit

Separation 500 mm – 800 mm
















C-C

ON, INC.

Machine tool probes

2-26

Mac

hine

tool

pro

bes

NC4 tool kit


NC4 air regulator kit


NC4 air fi lter service kit


NCi-4 interface


NC4 access panel 0.2






Steel sheath conduit 22 mm OD × 1 m

For NC4 fi xed cable protection.


Steel sheath conduit 17 mm OD × 1 m

For NC4 separate cable protection.


NC4 set-up tool


NC4S mounting hardware options

1. NC4 spacer plate – separate


2. NC4 adjuster pack – separate

Part number: A-4114-3100 Price: $228 1

2



C-C

ON, INC.

2-27

Mac

hine

tool

pro

bes

OTSThe OTS is a new optical transmission tool setter for

vertical and horizontal machining centers. Modeled on the

TS27R, OTS can set tool length and diameter of rotating

tools and perform broken tool detection. OTS is available

in two confi gurations – OTS ½AA and OTS AA. OTS can

be used with either the OMI-2 or OMI-2T interface. OMI-2T

must be used if OTS is to be paired with another optical

transmission probe.



Z: 5.5 mm (0.21 in)

Stylus trigger force 130 gf – 240 gf


1.0 µm (0.00004 in)

OTS retrofi t kit

Includes: OTS ½AA or OTS AA probe

OMI-2T


Sealtite kit

Renishaw tool setting software


Part number: OTS-S (½AA confi guration)

Part number: OTSAA-S (AA confi guration)

Available at fi xed price – call for details.




OTS hardware only kit

Includes: OTS ½AA probe or OTS AA probe

OMI-2T


Sealtite kit

Part number: OTS-KIT Price: $4,053Part number: OTSAA-KIT Price: $4,053

OTS ½AA probe kit

Includes: OTS probe

½ AA battery (2)

Tool kit


OTS AA probe kit

Includes: OTS probe

AA battery (2)

Tool kit






OMI-2 or OMI-2T mounting bracket


Sealtite conduit for OMI-2T



OTS ½AA

OTS AA(available Fall 2008)



C-C

ON, INC.

Machine tool probes

2-28

Mac

hine

tool

pro

bes

TRS2TRS2 is a cost-effective laser-based solution for high-speed

broken tool detection. Working with the refl ective properties

of a rotating tool, TRS2 can detect broken tools at a distance

of between 300 mm and 2 m, but optimized for use between

300 mm and 1 m. Toolwise™ Electronics makes TRS2

especially effective with tiny, easily broken tools down to

0.019 in (0.5 mm) diameter. TRS2 is suitable for solid profi le

tools including drills, taps, reamers and end mills.

TRS2 hardware kit

Includes: TRS2 laser system with integral interface

Tool kit

Air regulator kit

Sealtite kit

Mounting bracket

Renishaw TRS2 BTD software

Part number: TRS2-kit Price: $2,600

TRS2 probe only



TRS2 retrofi t kit


Tool kit

Air regulator kit

Sealtite kit

Mounting bracket

Renishaw TRS2 BTD software


Part number: TRS2-S (Available at fi xed price) Call for details

Special pricing available for multiple systems.

Note: The retrofi t questionnaire at the end of this section must

be fi lled out and returned to Renishaw before a retrofi t order can

be processed.

TRS2 air regulator kit


TRS2 air fi lter service kit


Sealtite conduit for TRS2



TRS2 replacement air cap




C-C

ON, INC.

2-29

Mac

hine

tool

pro

bes

TS27RThe TS27R is a tool setter for vertical machining

centers that enables the user to set both tool length and

diameter of rotating tools, and to carry out broken tool

detection.



Z: 5.5 mm (0.21 in)

Stylus trigger force 80 gf – 170 gf


1.0 µm (0.00004 in)

TS27R retrofi t kit

Includes: TS27R probe

MI8 interface

Sealtite kit

Renishaw toolsetting software


Part number: TS27R-S (Available at fi xed price) Call for details


must be fi lled out and returned to Renishaw before a

retrofi t order can be processed.

TS27R hardware only kit

Includes: TS27R probe

MI8 interface

Sealtite kit

Part number: TS27R-KIT Price: $1,402

TS27R probe, stylus, and holder kit


MI8 interface


TS27R replacement parts and accessories

TS27R tungsten carbide stylus (0.5 in disk)


TS27R ceramic stylus (19 mm square)


TS27 stylus (0.5 in disk)

For TS27 probes shipped prior to July 1995.

Part number: M-5003-1033 (steel) Price: $111Part number: M-2008-0197 (ceramic) Price: $111

TS27R retrofi t stylus kit

Includes: Break protection

Tether

Screws


TS27R break protect link


TS27R stylus holder with 4 set screws


TS27R stylus holder set screws

Part number: P-SC13-0403 Price: $1

TS27R-RH crank for horizontal machining centers


TS27R 100 mm riser

Part number: M-2008-0866-RI-KIT Price: $129



C-C

ON, INC.

Machine tool probes

2-30

Mac

hine

tool

pro

bes

Various styles of optical transmission system are available for use on

turning centers. Each system is functionally similar. All may be turned on

and off via an M code, or turned on via an M code and turned off via an

internal timer settable to 33 or 134 seconds.

All lathe transmission systems require an LP2 or

LP2H probe. The primary differences between the

lathe transmission systems are shown below:

LP2/LTO3T/S retrofi t kit

Includes: LP2 probe

LTO3T OMP

Ø25 mm integral shank

OMM


MI12 interface

30 mm styli (2)

Lathe software

Sealtite kit

Installation & application support

Part #: LP2-LTO3T-S Price: *

LP2/LTO3T hardware only kit

Includes: LP2 probe

LTO3T OMP


OMM


MI12 interface

30 mm styli (2)

Sealtite kit

Part #: LP2-LTO3T-KIT $7,057

LP2/LTO3T LP2/LTO2T LP2/LTO2S

LP2/LTO2T/S retrofi t kit

Includes: LP2 probe

LTO2T OMP


OMM


MI12 interface

30 mm styli (2)

Lathe software

Sealtite kit


Part #: LP2-LTO2T-S Price: *

LP2/LTO2T hardware only kit

Includes: LP2 probe

LTO2T OMP


OMM


MI12 interface

30 mm styli (2)

Sealtite kit

Part #: LP2-LTO2T-KIT $6,829

LP2/LTO2S/S retrofi t kit

Includes: LP2 probe

LTO2S OMP

Ø25 mm straight shank

OMM


MI12 interface

30 mm styli (2)

Lathe software

Sealtite kit


Part #: LP2-LTO2S-S Price: *

LP2/LTO2S hardware only kit

Includes: LP2 probe

LTO2S OMP

Ø25 mm straight shank

OMM


MI12 interface

30 mm styli (2)

Sealtite kit

Part #: LP2-LTO2S-KIT $7,050

Inspection probes for turning centers

LP2/LTO3T, LP2/LTO2T and LP2/LTO2S

* Available at fi xed price. Call for details.

OMP type Size Turret mounting methods Battery access Battery required

LTO3T 62 mm dia. × 49 mm shank length 80 mm

Integral straight shankAvailable in metric or inchA-2030-0330 (25 mm)A-2030-0334 (1 inch)

Thru rear of turret-resident straight shank

2 × Duracell DL123

LTO2T 62 mm dia. × 49 mm shank length 60 mm

Integral straight shankAvailable in metric or inchA-2030-0218 (25 mm)A-2030-0274 (1 inch)

Thru rear of turret-resident straight shank

1 × Duracell DL123

LTO2S 62 mm dia. × 87 mm shank length depends on shank selected

Via user-selected shank, eg straight (metric or inch) or taper (CAT, BT etc).

Thru battery housing located external to turret face

1 × Duracell 9 V PP3



C-C

ON, INC.

2-31

Mac

hine

tool

pro

bes

LTO3T OMP with 25 mm integral shank


LTO3T OMP with 1 in integral shank


LTO2T OMP with 25 mm integral shank


LTO2T OMP with 1 in integral shank


LTO2S OMP






MI12 interface


Sealtite conduit




Used with LTO2S OMP.


3 V DL123A battery

Used with LTO2T and LTO3T.


LTO2 battery upgrade kit

Required for LTO2T and LTO2 systems currently using

10.8 V mercury battery.

Includes: Battery cap

Battery boosting module

3 V DL123 A battery


LTO2S accessories kit

Includes: Tool kit

Steel adjusting plate

Ø8 mm ball


M4 × 12 screw (4) P-SC31-0412

M5 × 12 screw (4) P-SC31-0512

M8 × 12 screw (2) P-SC04-0812

M5 × 16 grub screw (4) P-SC11-0516

Washer (4)

O ring




C-C

ON, INC.

Machine tool probes

2-32

Mac

hine

tool

pro

bes

LP2 probeThe LP2 probe is used on CNC lathes for workpiece inspection

and tool setting. It is also used in special applications where its

small body makes it suitable for gaging workpiece features with

restricted access.

The LP2 is universal and can be fi tted to optical, inductive,

hard-wired and radio transmission systems. An array of sockets

and adaptors is available to support these applications. Please

contact Renishaw for further details.



Z: 6.5 mm (0.25 in)



Z: 585 gf

Unidirectional repeatability 1.0 µm (0.00004 in)

Includes: LP2 probe

2 C spanners

TK1 tool kit


MP250 (available winter 2008/2009)MP250 is the next generation compact probe. Measuring just

25 mm in diameter and 40 mm in length, MP250 is identical

in size to the popular LP2. MP250 uses Rengage™ strain

gage sensing technology and delivers superior metrology

performance. MP250 is aimed at the tool cutter grinder and

special CNC lathe markets. MP250 is supported via hardwired

only and must be used with the HSI interface and FS sockets

designed specifi cally for the MP250. MP250 is not suitable for

use with inductive, optical or radio transmission.



Z: 6.5 mm (0.25 in)


X and Y: 11 gf

Z: 220 gf


0.25 µm (0.00001 in)

MP250 probe kit

Includes: MP250 probe

Tool kit


(shown with optional lathe transmission system)

MP250 accessories

FS1 adjustable female socket for MP250


FS2 fi xed female socket for MP250


HSI interface for MP250




C-C

ON, INC.

2-33

Mac

hine

tool

pro

bes

LP2H probeThe LP2H probe is used on CNC lathes for workpiece

inspection and tool setting. It is designed for heavier duty

applications where machine vibration or heavy stylus

arrangements may cause unexpected triggers.



Z: 5 mm (0.20 in)

Stylus trigger force (not adjustable, factory set using 50 mm stylus)

X and Y: 200 gf – 400 gf

Z: 3000 gf


2.0 µm (0.00008 in)

Includes: LP2H probe

2 C spanners

TK1 tool kit


LP2DD probeThe LP2DD probe is based on the LP2 design, but incorporates

a revised diaphragm assembly. This probe is recommended

for grinding machines and other installations where dust-fi lled

coolant is abundant.



Z: 6.5 mm (0.25 in)



Z: 585 gf


1.0 µm (0.00004 in)

Includes: LP2DD probe

2 C spanners

TK1 tool kit




C-C

ON, INC.

Machine tool probes

2-34

Mac

hine

tool

pro

bes

LP2/LP2DD replacement parts

Conversion kit

This kit allows the conversion of your existing LP2 probe to LP2DD.

Includes: 2 C spanners

Front ring

Outer diapragm

O ring


LP2DD diaphragm replacement kit

An outer diaphragm replacement kit for the LP2DD.

Includes: Diaphragm

O ring


Chip defl ector

This defl ector is recommended if the LP2DD is subjected to

continual exposure to hot chips.


C spanner

A C spanner is required for fi tting an LP2 to your machine.


LP2 service kit (DK2)

Includes: Front cap

Metal eyelid

Spring

O ring


TK1 tool kit

Includes: Stylus tool

1.5 mm A/F hex key

2.0 mm A/F hex key

2.5 mm A/F hex key

3.0 mm A/F hex key

4.0 mm A/F hex key




C-C

ON, INC.

2-35

Mac

hine

tool

pro

bes

LP2 accessories

FS1 adjustable female socket

Provdies ±4° of angular rotation about the centerline of

the LP2. Supplied with 500 mm long cable, protective

cover and adjusting screws.


FS2 fi xed female socket

Designed for rigid mounting of an LP2. Supplied with

500 mm long cable and protective cover.


FS3 single axis adjustable holder

The socket pivots on two balls, this provides ±4° of pitch

adjustment about the centerline of the LP2. Supplied

with 500 mm long cable, protective cover and adjusting

screws.


MA4 90° adaptor


COS to LP2 adaptor

This adaptor allows the use of the LP2 on the MP7/MP8/

MP9/MP10 OMP.


IMP inductive module


IMM inductive module

See MP1 or MP3 inductive section.

Part number: A-2028-_ _ _ _ Price: $902

MI5 interface


MI8 interface


LPE1 extension

A 50 mm long extension which can be fi tted between the

LP2 and holder.


LPE2 extension

100 mm long.


LPE3 extension

150 mm long


LP2 straight shanks

LP2 straight shanks are fi tted with FS2 socket

assemblies to accommodate the LP2 probe. An MI8

interface is also required.

LP2 0.75 in straight shank with FS2 and cable assembly


LP2 1 in straight shank with FS2 and cable assembly


LP2 22 mm straight shank with FS2 and cable assembly




C-C

ON, INC.

Machine tool probes

2-36

Mac

hine

tool

pro

bes

Tool setting for turning centers

High precision removable arm (HPRA)The HPRA is a ‘plug-in’, cost effective, precision tool setting system

for use on CNC lathes. When needed, the arm is manually introduced

to the machine envelope and held in place through the use of the

machine resident HPRA base. The arm is locked in position through

the duration of the tool setting cycle. After use, the arm is removed and

stored on the HPRA storage stand.

Unidirectional repeatability

Max 2 sigma value: 5.0 µm (0.0002 in) for arms

supporting 6 in to 15 in chucks

8.0 µm (0.0003 in) for arms


Max arm dimensions: A=580 mm B=450 mm

Min arm dimensions: A=250 mm B=211 mm

HPRA is available to fi t most common chuck sizes from 6 in to 24 in.

Each HPRA standard kit (see below) is supplied complete with:

• RP3 probe (A-2197-0049)

• 90° probe holder

• TSi2 interface (A-2176-0010)

• HPRA storage stand (A-2176-0019)

Standard kits

Part number: See below Price: $3,538*

* A stylus assembly and base (R/E or S/E) rear exit or side exit are not

included and must be ordered separately.

Custom kits

The HPRA can also be designed for specifi c applications. The customer

must specify arm length, probe holder, stylus confi guration etc. The

items below depict some of the options. Please contact Renishaw for

pricing.

1 A-2176-0268 PCB/LED housing

2 A-2176-0018 90° holder fi xed

3 A-2176-0257 I/L holder fi xed

4 A-2048-0523 LP2 adaptor

5 A-2176-1291 I/L adj RP3 holder

6 A-2176-1290 30° adj RP3 holder

7 A-2176-0269 45° adj RP3 holder

8 A-2176-1289 60° adj RP3 holder

9 A-2176-1288 90° adj RP3 holder

Part description Part number A-dimension B-dimension

HPRA 6 in chuck with RP3 kit A-2176-0883 250 211







CNC machine controller

TSi2 interface

Base

HPRA

RP3

Stylus

Stand

1

2

3

45

67

89



C-C

ON, INC.

2-37

Mac

hine

tool

pro

bes

HPRA bases

The HPRA base is designed to provide a repeatable location for fi xing the HPRA

arm during tool setting cycles. The base is designed to stay resident within the

machine and is supplied with a cover to protect the unit from coolant and debris

when the arm is not in use. HPRA bases are available in rear and side exit

confi gurations and are supplied with 10 meters of cable.

HPRA rear exit base


HPRA side exit base


HPRA storage stand


HPRA/HPPA/HPMA stylus kits

There are six primary confi gurations of styli to support HPRA. Each is designed

to be compatible with standard sizes of block tooling ranging from 5/8 in to 2 in.

Each stylus kit is supplied complete with:

• 15×15×4 stylus assembly

• Break stem

• Stylus extension/adaptor

• Screws and tool kit

Part number: A-2197-0157 (16 mm tooling) Price: $116Part number: A-2197-0158 (20 mm tooling) Price: $116Part number: A-2197-0159 (25 mm tooling) Price: $116Part number: A-2197-0160 (32 mm tooling) Price: $116Part number: A-2197-0161 (40 mm tooling) Price: $116Part number: A-2197-0162 (50 mm tooling) Price: $116

HPRA/HPPA/HPMA break stems

Part number: M-2197-0156 (16 and 20 mm tooling) Price: $25Part number: M-2197-0150 (25 to 50 mm tooling) Price: $25

Stylus assembly

Break stem



C-C

ON, INC.

Machine tool probes

2-38

Mac

hine

tool

pro

bes

High precision pull-down arm (HPPA)

High precision motorized arm (HPMA)The HPPA is a manual ‘pull-down’ ‘push-up’ tool setting system

for use on CNC lathes. The HPMA is an ‘automatic’ servo driven

system. Both products are designed to permanently reside in the

machine envelope.

When needed, the HPPA is manually ‘pulled-down’ into position.

After use, the arm is ‘pushed-up’ away from the cutting volume.

HPMA requires the use of CNC M codes to drive the arm to its

active and stowed positions.

All HPPA and HPMA systems are supplied with an enclosure to

protect the probe and stylus assembly when not in use. HPPA and

HPMA hubs are available in both R/E (rear exit ) and S/E (side

exit) confi gurations. S/E hubs are supplied with a fi xed 5 m cable.

R/E hubs are supplied with a bulkhead connector and require the

purchase of a separate cable.

Specifi cationsUnidirectional repeatability

max 2σ value in machine XZ axis: 5.0 µm (0.0002 in) for arms


8.0 µm (0.0003 in) for arms


HPPA max arm dimensions: A=555 mm B=458 mm

HPPA min arm dimensions: A=250 mm B=219 mm

HPMA max arm dimensions: A=555 mm B=458 mm

HPMA min arm dimensions: A=250 mm B=219 mm

HPPA and HPMA are available to fi t most common chuck sizes

from 6 in to 24 in. Each ‘standard’ kit (see below) is supplied

complete with:

• Arm

• HPPA or HPMA hub

• RP3 probe (A-2197-0049)

• 90° probe holder

• TSi2 interface for HPPA (A-2176-0010)

• TSi3 interface for HPMA (A-2181-0465)

• Probe enclosure (A-2275-0098)

• Cable (supplied with S/E systems only, purchase separately for

R/E systems)

CNC machine controller

TSi2 or TSi3 interface

Cable HPPA/HPMA

hub

HPPA

Probe enclosure

Stylus RP3A-2197-0004



C-C

ON, INC.

2-39

Mac

hine

tool

pro

bes

HPPA standard kits

Part number: See below Price: $4,181*

* A stylus assembly is not included and must be ordered separately. In addition HPPA

and HPMA R/E systems require the separate purchase of a cable.


HPPA 6 in R/E with RP3 kit A-2275-0181 250 219







HPPA 6 in S/E with RP3 kit A-2275-0188 250 219







HPMA standard kits

Part number: See below Price: $4,718


HPMA 6 in R/E with RP3 kit A-2181-0645 250 219







HPMA 6 in S/E with RP3 kit A-2181-0652 250 219







Custom kitsThe HPPA and HPMA can also be designed for specifi c applications. The customer

must specify arm length, probe holder, stylus confi guration, hub type etc. The items

below depict some of the options. Please contact Renishaw for pricing.

1 A-2176-0268 PCB/LED housing

2 A-2176-0018 90° holder fi xed

3 A-2176-0257 I/L holder fi xed

4 A-2048-0523 LP2 adaptor

5 A-2176-1291 I/L adj RP3 holder

6 A-2176-1290 30° adj RP3 holder

7 A-2176-0269 45° adj RP3 holder

8 A-2176-1289 60° adj RP3 holder

9 A-2176-1288 90° adj RP3 holder

A

B

4

3

1

2

56

78

9



C-C

ON, INC.

Machine tool probes

2-40

Mac

hine

tool

pro

bes

HPPA/HPMA cables

The HPPA and HPMA R/E systems require the use of one of the cables below:

Part number: P-CA82-1010 (2 meters) Price: $32Part number: P-CA82-1009 (5 meters) Price: $52Part number: P-CA82-1011 (10 meters) Price: $73

HPRA/HPPA/HPMA stylus kits

There are six primary confi gurations of styli to support HPPA and HPMA. Each is

designed to be compatible with standard sizes of block tooling ranging from

5/8 in to 2 in. Each stylus kit is supplied complete with:

• 15×15×4 stylus assembly

• Break stem

• Stylus extension/adaptor

• Screws and tool kit

Part number: A-2197-0157 (16 mm tooling) Price: $116Part number: A-2197-0158 (20 mm tooling) Price: $116Part number: A-2197-0159 (25 mm tooling) Price: $116Part number: A-2197-0160 (32 mm tooling) Price: $116Part number: A-2197-0161 (40 mm tooling) Price: $116Part number: A-2197-0162 (50 mm tooling) Price: $116

HPRA/HPPA/HPMA M4 break stems

Part number: M-2197-0156 (16 mm and 20 mm tooling) Price: $25Part number: M-2197-0150 (25 mm to 50 mm tooling) Price: $25Part number: M-2048-2093 (Mori Seiki) Price: $25

Stylus assembly

Break stem



C-C

ON, INC.

2-41

Mac

hine

tool

pro

bes

RP1, RP2 and RP3 tool setting probesThe RP1, RP2 and RP3 probes are suitable for OEM installation into purpose-

built holders, or for use with Renishaw’s automatic or manual tool setting arms.

RP1 – Tool setting/inspection probe and tool kit

For use on OEM installation into purpose-built holders.


RP1 DD – RP1 double diaphragm version and tool kit

For use on OEM installation into purpose-built holders.


RP2 – Probe for tool setting arm (TSA) only


RP2DD – RP2 double diaphragm version for TSA only


RP3 – Probe for HPRA, HPPA and HPMA arms




C-C

ON, INC.

Machine tool probes

2-42

Mac

hine

tool

pro

bes

TS20 probe for HPAThe TS20 is a two axis probe for use with the original high precision arm (HPA).

Part number Tooling size Stylus overtravel with straight styli

Unidirectional repeatability 1 µm *

Trigger force **

A-2048-0550A-2008-0151

25 mm(0.98)

+6 mm(+.24 in)

1 µm (0.00004 in)

60 g – 160 g (2.15 oz – 5.64 oz)

A-2008-0110A-2008-0123

32 mm(1.26)

+7.5 mm(+.30 in)

1.25 µm (0.00005 in)

47 g – 126 g (1.66 oz – 4.44 oz)

A-2008-0121A-2008-0277

40 mm(1.57)

+9 mm(+.35 in)

1.5 µm (0.00006 in)

39 g – 106 g (1.38 oz – 3.74 oz)

* at probing speed of 480 mm/min (1,575 ft/min)

** dependent on sense direction

TS20 probe with straight stylus and Lemo connector

Part number: A-2048-0500 (25 mm tooling) Price: $772Part number: A-2008-0110 (32 mm tooling) Price: $772Part number: A-2008-0121 (40 mm tooling) Price: $772

TS20 probe with straight stylus and 5 m cable


TS20 replacement stylus kit

Includes stylus 10×10×4, break protect link, adaptor and screw.


TS20 break protect link

Part number: M-2008-0333 (25 mm tooling) Price: $25Part number: M-2008-0604 (32 mm tooling) Price: $25Part number: M-2008-0605 (40 mm tooling) Price: $25

0.02 mm (0.00079 in)

Non

-pro

bing

dire

ctio

n

Probe X and Y overtravel with straight stylus



C-C

ON, INC.

2-43

Mac

hine

tool

pro

bes

Interfaces

MI5 interfaceThe MI5 interface is required for use with Renishaw’s inductive transmission probe

systems. The MI5 converts probe signals into an acceptable form for the CNC

machine control. This interface has solid state relay outputs.


MI5 board only (SSR)


MI8 interfaceThe MI8 interface is required for use with Renishaw’s hard-wired probe system.

The MI8 converts probe signals into an acceptable form for the CNC machine

control. This interface has solid state relay outputs.


SSR converter

The SSR converter is used to convert the OCT electrical output of the high

precision arm with TS20 and signal conditioning module to voltage-free SSR

output.

Includes: SSR converter board (complete)

FS1 63 mA quick blow fuse (1)

FS2 100 mA anti-surge fuse (1)

Self-adhesive stand off feet (4)

Stand off feet (4)


MI12 interfaceThe MI12 interface is required for use with all Renishaw optical transmission probe

systems. The MI12 converts probe signals into an acceptable form for the CNC



MI12 board only (SSR)


NCi-4 interfaceAn NCi-4 interface is required for use with Renishaw non-contact tool setting

systems. The interface converts probe signals into an acceptable form for the CNC





C-C

ON, INC.

Machine tool probes

2-44

Mac

hine

tool

pro

bes

OMI, OMI-2 and OMI-2T interfacesOMI, OMI-2 and OMI-2T are optical receivers that transmit signals between the probe

and CNC control. These interfaces differ from the OMM as they include machine

interface circuitry that eliminates the MI12 interface. All three systems offer visual

indicators of probe status, start signal status, battery condition and error condition.

OMIOMI is compatible with all Renishaw optical transmission systems including the new

OMP60, OMP40 and OMP400 when confi gured for Legacy transmission.


OMI-2OMI-2 offers increased resistance to light interference and is exclusively compatible

with Renishaw optical transmission systems operating in Modulated transmission

mode (OMP60, OMP40 or OMP400).

Part number: A-5191-0049 (8 m cable) Price: $1,582Part number: A-5191-0050 (15 m cable) Price: $1,664

OMI-2TOMI-2T is identical to the OMI-2 and is the exclusive interface supporting the twin

probe system. OMI-2T is capable of communicating with two optical probes. CNC

must supply two M codes. This interface should be used when combining an OTS

with an OMP60 or OMP40-2.

Part number: A-5439-0049 (8 m cable) Price: $1,582Part number: A-5439-0050 (15 m cable) Price: $1,664

Lathe tool setting arm interfacesThere are two primary confi gurations of interfaces supporting lathe arms. The TSi2

and TSi3 deliver OCT (active high) output for probe status and arm positions, while

the TSi2-C and TSi3-C interfaces deliver SSR solid state relay outputs for probe

status and arm positions. The TSi2 and TSi2-C support the HPRA and HPPA lathe

arms. The TSi3 and TSi-3C support the HPMA lathe arm.

TSi2


TSi2-C


TSi3


TSi3-C


PSU3 power supplyThe PSU3 supplies power to the MI12 when a 24 V supply is not available from the

machine control.




C-C

ON, INC.

2-45

Mac

hine

tool

pro

bes

Machine tool software

Macro based programmingRenishaw probing and tool setting software is a set of macros that control

probing motion and data manipulation for a number of routines with input of a few

parameters. Some capabilities may vary by specifi c software package and individual

controller. All software is supplied on CD-ROM with electronic user’s guide.

Inspection software for machining centersAvailable measurement cycles include:

• X or Y or Z single surface measure

• Web/pocket

• 4 point bore/boss

• External corner

• Angle through two bores/bosses (Fadal only)

Description Memory Part number Price

Fadal 32 MP/CNC 88 42K to 105M A-4016-0036 $1,076

Inspection Plus software for machining centersAvailable measurement cycles include:

• X or Y or Z single surface measure

• Any angle web/pocket

• 3 or 4 point bore/boss

• Internal/external corner

• 4th or 5th axis measure

• Feature to feature measure

• Print data via RS232


Brother (June 2002 and above) 35K/87M A-4012-0908 $1,076

Fanuc 0-31 47K/117M A-4012-0516 $1,076

Haas 47K/117M A-4012-0880 $1,076

Mazak Fusion 47K/117M A-4013-0023 $1,076

Mazak Matrix 65K/163M A-4013-0112 $1,076

Meldas 47K/117M A-4012-0516 $1,076

Mori Seiki (Fanuc control) 47K/117M A-4012-0936 $1,076

Okuma OSP 47K/117M A-4016-1009 $1,076

Siemens 810D/840D (Ver 4 or less) 77K/190M A-4014-0075 $1,076

Siemens 810D/840D (Ver 5 and above) 77K/190M A-4014-0356 $1,076

Toshiba Tosnuc 888 47K/117M A-4012-0610 $1,076

Yasnac I80, MX3, J50, J300 47K/117M A-4014-0070 $1,076



C-C

ON, INC.

Machine tool probes

2-46

Mac

hine

tool

pro

bes

Inspection Plus software for machining centers using MP700Available measurement cycles include:


Fanuc 0-31 47K/117M A-4012-0685 $1,076

Haas 47K/117M A-4012-0890 $1,076

Mazak Fusion 47K/117M A-4013-0040 $1,076

Meldas 47K/117M A-4012-0685 $1,076

Mori Seiki (Fanuc control) 47K/117M A-4012-0942 $1,076

Okuma OSP 47K/117K A-4016-1035 $1,076

Siemens 810D/840D (Ver 4 or less) 77K/190M A-4014-0152 $1,076

Siemens 810D/840D (Ver 5 and above) 77K/190M A-4014-0362 $1,076

Yasnac I80, MX3, J50, J300 47K/117M A-4014-0104 $1,076

Tool setting software for machining centersRenishaw tool setting software allows you to set tool length and diameter

offsets for single point and multiple point tools, perform in-cycle broken tool

detection and manual or automatic (programmed) positioning.

Contact tool setting


Fadal 13K/32M A-4016-0043 $431

Fanuc 0-31 9K/23M A-4012-0584 $431

Haas 9K/23M A-4012-0886 $431

Mazak 640M, M32, M+ 9K/23M A-4013-0036 $431

Meldas 9K/23M A-4013-0007 $431

Okuma OSP 9K/23M A-4016-1039 $431

Siemens 810/840D (Ver 4 or less) 9K/23M A-4014-0090 $431

Siemens 810/840D (Ver 5 and above) 9K/23M A-4014-0396 $431

Yasnac J50, J300, I80/MX3 9K/23M A-4014-0018 $431

Non-contact tool setting


Brother 27K/67M A-4012-0904 $646

Fadal 27K/67M A-4016-0061 $646

Fanuc 0-31 24K/67M A-4012-0820 $646

Haas 24K/67M A-4012-0895 $646

Makino 27K/67M A-4012-0900 $646

Mazak Fusion 24K/67M A-4013-0062 $646

Mazak Matrix 57K/143M A-4013-0119 $646

Meldas 24K/67M A-4013-0050 $646

Okuma OSP 27K/67M A-4016-1021 $646

Siemens 810/840D (Ver 4 or less) 34K/84M A-4014-0157 $646

Siemens 810/840D (Ver 5 and above) 27K/67M A-4014-0401 $646

Yasnac MX3, I80, J50, J300 27K/67M A-4014-0020 $646

Special non-contact tool setting


Fanuc angle beam 0-31 27K/67M A-4012-0862 $646

Makino angle beam 27K/67M A-4013-0838 $646

Mazak angle beam Fusion 27K/67M A-4013-0088 $646

Mazak Matrix angle beam 57K/143M A-4013-0119 $646

Mazak E-Series Matrix 52K/130M A-4013-0123 $646

Mazak E-series Fusion 27K/67M A-4013-0092 $646

Mazak Mark III Fusion 27K/67M A-4013-0567 $646

Yasnac angle beam 27K/67M A-4014-0025 $646

• X or Y or Z single surface measure • Internation/external corner

• XYZ vector measure • 4th or 5th axis measure

• Any angle web/pocket • Feature to feature measure

• 3 or 4 point bore/boss • Print data via RS232



C-C

ON, INC.

2-47

Mac

hine

tool

pro

bes

Inspection software for turning centersRenishaw’s Inspection software for turning centers offers macros for:

• single-point (radial) measurement

• two-point (diameter) measurement

• rib/groove measurement

• single Z-surface measurement

It can update tool offsets and work offsets. It has an upper tolerance band which

can be set for no offset correction. On completion of each measurement cycle it

is possible to print out the results.


Fanuc 0-31 11K/27M A-4012-0541 $861

Haas 11K/27M A-4012-0874 $861

Mazak Fusion 11K/28M A-4013-0071 $861

Siemens 810D/840D 19K/47M A-4014-0137 $861

Yasnac LX3 10K/26M A-4014-0011 $861

Inspection software for multi-axis turning centers• horizontal and vertical head orientations

• X, Y and Z single surface measure

• bore/boss

• web/pocket

• C axis fi nd


Mazak Mark III Fusion 45K/113M A-4013-0030 $1,076

Mazak E-series Fusion 75K/188M A-4013-0083 $1,076

Mori Seiki MTNT 43K/106M A-4012-0834 $1,076

Hitachi Hi-Cell 75K/188M A-4012-0843 $1,076

Nakamura NTX 46K/113M A-4012-1074 $1,076

Mazak Mark IV and E-series Matrix 110K/275M A-4013-0106 $1,076

Doosan MT 43K/106M A-4012-1016 $1,076

Tool setting software for turning centersThe Renishaw tool setting software for turning centers sets tool length and/or

diameter for static and powered tools. It has manual or automatic (programmed)

positioning capability.


Fanuc 0-31 4K/8M A-4012-0528 $431

Haas 4K/8M A-4012-0877 $431



C-C

ON, INC.

Machine tool probes

2-48

Mac

hine

tool

pro

bes

Off-line programmingProductivity+™ is a new software module designed to

simplify the process of integrating probing cycles into

the CNC machining program. Productivity+™ Active

Editor Pro runs standalone, while the Productivity+™

GibbsCAM® plug-in runs in the GibbsCAM® environment

and requires GibbsCAM® version 7 or above.

Productivity+™:

• Imports the native CAD model

• Creates and edits probing programs

• Allows simulation of inspection routines in a virtual

environment

• Requires no detailed knowledge of macro codes

• Is compatible with many popular controls

Productivity+™ comes with three CAD importers as

standard: IGES, STEP and Parasolid®. Other CAD

importers are available (select from the list below).

Productivity+™ is supplied with one post processor

(select from the list below).

The Productivity+™ GibbsCAM® plug-in requires the

GibbsCAM® machine post processor to be upgraded to

allow compatibility.

Productivity+™ GibbsCAM® plug-in


Productivity+™ Active Editor Pro


Productivity+™ post processors

Control Part number Price

Brother A-4007-5900 $1,500

Fanuc Macro B A-4007-5100 $1,500

Haas A-4007-5200 $1,500

Heidenhain A-4007-6000 $1,500

Hitachi Seicos A-4007-5300 $1,500

Hurco A-4007-6800 $1,500

Makino A-4007-5400 $1,500

Mazatrol ISO A-4007-5500 $1,500

Mitsubishi Meldas A-4007-5600 $1,500

Mori Seiki A-4007-6600 $1,500

Siemens A-4007-6700 $1,500

Yasnac A-4007-5700 $1,500

Productivity+™ CAD importers

CAD system Part number Price

Pro-E A-5226-0007 $1,500

CATIA A-5226-0008 $2,000

UG/NX A-5226-0009 $1,500

ACIS A-5226-0010 $1,000

SolidWorks® A-5226-0011 $1,500

Inventor™ A-5226-0012 $1,500

GibbsCAM® post processor upgrade service

Part number: RI-4007-1000 Price: $300

One-year maintenance contract


Productivity+™ Active Editor Pro 90-day trial

Part number: A-4007-8999 Price: FOC



C-C

ON, INC.

2-49

Mac

hine

tool

pro

bes

Renishaw OMVRenishaw OMV is a part verifi cation package for

machine tools, designed to give confi dence to the user

that the part produced conforms to the CAD model from

which it was produced.

• Has simple to use “point and click” feature selection

with graphical probe path simulation.

• Verifi es the part whilst still on the machine,

eliminating set-up time or potential re-work.

• Gives a graphical display and reports on how well

the part matches the CAD model, allowing instant

“go/no-go” decisions to be made.

Renishaw OMV software

Includes one post processor from the list below.


Renishaw OMV Pro software

Renishaw OMV Pro is a comprehensive part verifi cation

software package. Renishaw OMV Pro offers all the

features of Renishaw OMV. In addition, Renishaw OMV

Pro provides:

• Tools for constructing geometric features

• Geometric dimensioning and tolerancing (GD&T)

• Complex part alignment

• Full machine simulation

Includes one post processor from the list below.


Renishaw OMV and OMV Pro post processors

Control Part number Price

Fanuc A-5369-3001 $300

Haas A-5369-3002 $300

Siemens 840D A-5369-3003 $300

Heidenhain I530 A-5369-3004 $300

Cycle 19 and non-cycle 19

Mazak A-5369-3005 $300

Mori Seiki A-5369-3008 $300

Makino A-5369-3009 $300

Yasnac A-5369-3010 $300

Hitachi Seiki A-5369-3011 $300

Okuma A-5369-3016 $300

First post processor included free of charge.

Multi-axis modules

Renishaw OMV multi-axis module


Renishaw OMV Pro multi-axis module

Part number: A-5369-4100-DNA Price: $3,000

One-year maintenance contracts

OMV annual maintenance


OMV Pro fi rst year maintenance


OMV Pro second year maintenance


OMV multi-axis module annual maintenance


OMV Pro multi-axis module annual maintenance

Part number: A-5369-4020-DNA Price: $360

Maintenance buy-in services are available. Please call

for details.



C-C

ON, INC.

Machine tool probes

2-50

Mac

hine

tool

pro

bes

OMV CAD importers


Parasolid® A-5369-5001 $1,500

SDRC A-5369-5002 $1,500

ProE Wildfi re A-5369-5003 $1,500

Solid Edge A-5369-5007 $1,500

SolidWorks® A-5369-5008 $1,500

CATIA V5 A-5369-5009 $1,500

Cimatron A-5369-5010 $1,500

OMV Pro CAD importers


Parasolid® A-5369-5001-DNA $1,500

SDRC A-5369-5002-DNA $1,500

ProE Wildfi re A-5369-5003-DNA $1,500

Solid Edge A-5369-5007-DNA $1,500

SolidWorks® A-5369-5008-DNA $1,500

CATIA V5 A-5369-5009-DNA $1,500

Cimatron A-5369-5010-DNA $1,500

Renishaw servicesRenishaw has set up a series of part numbers which

should be referenced when ordering Renishaw services.

These part numbers will appear on your invoice.


RI-6000-0001 Hourly labor $140/hour

RI-6000-0002 Hourly travel $75/hour

RI-6000-0003 Expenses as incurred



C-C

ON, INC.

2-51

Mac

hine

tool

pro

bes

Probe retrofi t questionnaire

Customer information (location of installation)

Important! This document consists of four pages. Please be sure to read all information before returning.

Address of installation:

Company name __________________________________ Contact name ____________________________________________

Street ____________________________________________

City __________________________________ State ______________________ Zip ____________________________

Telephone ____________________________ Fax _______________________ E-mail __________________________

Product being purchased _______________________________________________

Machine information

Machine make ___________________________________ Control make ____________________________________________

Machine model __________________________________ Control model ___________________________________________

Machine type (i.e. VMC, HMC, lathe, gantry etc.) _________________________________________________________________

Tool holder type/size (i.e. CAT50, BT40, HSK A80, VDI, other) ______________________________________________________

Axis/Axis travels: X ____________ Y ___________ Z __________ B ____________ Other ____________________

Is the machine still in warranty? Yes No Serial # __________________

Is the machine installed? Yes No If no, when will installation be complete? _________________

Spindle orientation: Yes No

Pallet shuttle: Yes No If Yes, indexer or full 4th axis

Is there currently a probe system on the machine (i.e. tool post, part probe, tool eye)? Yes No

If yes, please explain _______________________________________________________________________________________

Is a safety briefi ng required to work at location of installation? Yes No

Note: If a non-disclosure form is required to enter the facility, please provide at least two weeks prior to the scheduled

visit.

Application information ______________________________________________________________________________________

_________________________________________________________________________________________________________

_________________________________________________________________________________________________________

!



C-C

ON, INC.

Machine tool probes

2-52

Mac

hine

tool

pro

bes

Note: The machine must be operational at the time of installation. A pull stud is required for spindle-mounted probes, but is not

provided by Renishaw. A calibration device is not supplied.

The following options must be installed and activated (turned on) by your OEM, machine distributor or control

manufacturer prior to Renishaw’s arrival.

Required control features/options

Indicate which options are installed on your control.

Fanuc/Yasnac/Mitsubishi/Mazak Haas

G31 skip Yes No Promac Yes No

G31 high speed skip Yes No

G31 multi-skip Yes No

Custom macro Yes No

Connector type/pin location of skip signal ____________________

• 24 V dc required to power probe interface

• M codes may be required – see the following information pages for details

Note: Controls not listed may have similar features/options. Contact Renishaw regarding support for other controls.

IMPORTANT

This questionnaire is intended for information purposes for installation only and shall in no event constitute a binding contract with

Renishaw.

Please note – The issuer of the purchase order is responsible for all information provided to Renishaw. Please make sure that the

information is as accurate and current as possible, as this will expedite the installation. If additional time or hardware is required,

due to incorrect information, additional costs may be billed to you.

The installation timeframe is 2 to 3 weeks. Please keep in mind that your installation is not considered for scheduling until this form

is completed and returned to us. At that time, the form will be reviewed and you will be contacted as to the acceptability of the

retrofi t and dates available for installation.

I have read and understood the preceding information.

Important – this document consists of four pages. Please be sure to read all information before returning.

Signed _____________________________________ Date ____________________

Purchase order issued to Renishaw by:

Company name __________________________________ Contact name ____________________________________________

Street ____________________________________________

City ___________________________________ State _______________________ Zip ____________________________

Telephone ______________________________ Fax _______________________

!



C-C

ON, INC.

2-53

Mac

hine

tool

pro

bes

Additional retrofi t customer informationMachine tool software requirements

Machining center: Inspection Plus 46.5 Kb 117 m

Tool setting 9 Kb 23 m

NC4 tool setting 15 Kb 38 m

Lathe software: Inspection 11 Kb 28 m

Tool setting 6 Kb 15 m

Program number requirements

Renishaw program numbers range from 9002 through 9100, and 9700 through 9900.

Macro variables required #100–#149 (only used while macro is running)

#500–#565 (some variables in this range required and must be dedicated)

Training

Training will be provided after installation on the use and application of Renishaw probing cycles. Training will not include the

incorporation of probe cycles into the customer’s current manufacturing programs. Any special applications or additional software

training which requires additional time or visits to the original scheduled installation/training will be charged at Renishaw Inc

standard service rates.

Note: Please indicate any additional training requirements on your purchase order.

Part probe system details

OMP40/OMP60/RMP60 Turn on (via optical or RF) / Turn off (via optical or RF) Installation time: Up to 8 hours

or time out Training time: Up to 6 hours

Turn on methods Auto start (OMP40/OMP60) sends a start signal every second until a probe

command is received. This method can only be used if the probe is stored outside

the machine enclosure when not in use.

Machine start (OMP40/OMP60/RMP60) requires that an M code be available for

use to issue the start command.

Spin start (OMP60/RMP60) uses an internal switch. The probe will turn on after

being spun at 650 RPM for 1 second.

Turn off methods Time out (OMP40/OMP60/RMP60). A timer automatically switches the power off

12, 33 or 134 seconds (selectable) after turn on. Each time the probe is triggered,

the timer is reset to the selected value.

Optical off (OMP40/OMP60) / RF off (RMP60) requires that an M code be available

to initiate the turn off sequence.

OMP400 Optical (fl ash) on/optical off or time out (optical transmission) Installation time Up to 8 hours

Training time Up to 6 hours

Turn on method Machine start (optical on) requires that an M code be available for use to issue the

start command. Auto start cannot be used with the strain gage probes.

Turn off methods Time out. A timer automatically switches the power off 33 or 134 seconds

(selectable) after turn on. Each time the probe is triggered, the timer is reset to 33

or 134 seconds.

Optical off. Requires the use of an M code as stated for machine start above.

Optical (fl ash) on/optical off (optical transmission) Installation time Up to 8 hours


Turn on method Machine start (optical on) requires that an M code be available for use to issue the

start command. Auto start cannot be used with these probes.

Turn off method Optical off. Requires the use of an M code as stated for machine start above.

LP2/LTO2T

(LP2/LTO3T)

(LP2/LTO2S)



C-C

ON, INC.

Machine tool probes

2-54

Mac

hine

tool

pro

bes

Tool setting probe details

TS27R Hard-wired Installation time Up to 6 hours


The probe is fi xed either to a T slot in the machine bed, or can be mounted on a riser if required to allow

tools to reach the stylus. A riser is not provided by Renishaw unless specifi ed on the quotation. The TS27R

is wired to the probe interface via a tough cable conduit. The TS27R cannot be mounted on pallets or

rotary tables.

NC4 Hard-wired Fixed installation time Up to 8 hours


Fixed system The probe is fi xed either to a T slot in the machine bed, or can be mounted on a riser

if required to allow tools to reach the laser beam. A riser is not provided by Renishaw

unless specifi ed on the quotation. The NC4 is wired to the probe interface via a tough

cable conduit. The NC4 cannot be mounted on pallets or rotary tables.

Separate installation time Up to 12 hours *


Separate system The probe transmitter and receiver are mounted to brackets which attach to the

machine. Brackets and their installation are not provided by Renishaw unless

specifi cally stated in the quotation. Brackets not provided by Renishaw must be

mounted prior to the arrival of a Renishaw engineer. The brackets should allow for

complete machine motion (pallet shuttles, rotary tables, axis travels etc), laser beam

alignment and expected system performance.

* Depending on bracket mounting requirements, additional time may be required.

Fixed or separate The NC4 must be mounted in such a way that the tool can access the laser beam and

move in all three axes (X, Y, Z) with respect to the beam. For basic functionality (length,

diameter, basic broken tool), no M code is required. For additional features (missing/

broken insert, profi le checking, rapid broken tool check) a level M code pair is required.

HPRA Hard-wired The HPRA must be mounted to a bracket which attaches to the machine. The brackets

and their installation are not provided by Renishaw unless specifi cally stated in the

quotation. Brackets not provided by Renishaw must be mounted prior to the arrival of

a Renishaw engineer. The brackets should allow for complete machine and expected

system performance.

Dual probe installations (part and tool probe on same machine)

Requires either two independent probe inputs (multi-channel skip) or an M code driven relay. The M code driven relay must be

installed and available prior to the probe installation.

Example M51 – part probe (selected) M61 – tool setter (selected)

M51 energize relay (coil latches and stays energized) program continues

M61 de-energize relay (coil resets) program continues

M code for fl ash (optical) on and off

M71 pulse (momentarily energize relay) program continues

Example: Pulse M code M71 (fl ash on and fl ash off)



C-C

ON, INC.

Performance measurement and calibration systems

Section 3

Calibration Issue 15.indd 3-1Calibration Issue 15.indd 3-1 30/07/2008 10:04:4130/07/2008 10:04:41


C-C

ON, INC.


3-2

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

XL laser calibration systemUsed for comprehensive accuracy and performance

measurement of any machine or system.

Linear measurement range 80 meters

Linear measurement accuracy ±0.5 ppm

Laser frequency accuracy ±0.05 ppm

Resolution 1 nm

Maximum travel velocity 4 m/s

Dynamic capture rate 10 Hz – 50 kHz

Contents of base XL system case

1712B × 2 12C

12D

1A

2A

3B

3C

1B

3D

15

14

5B5A5C4C4A

12A

4B12A

3A

3E

1C

2B

16

16

× 3

× 4



C-C

ON, INC.

3-3

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Kit part no. Part name Includes Part no. Index PageA-9908-0405 XL-80 laser kit XL-80 laser 1A 3-6 ✓ ✓ ✓ Universal power supply A-9908-0299 1B 3-2 ✓ ✓ ✓ USB cable A-9908-0286 1C 3-2 ✓ ✓ ✓ XL system support disk A-9908-0303 NS ✓ ✓ ✓ AUX I/O connector A-9908-0329 NS ✓ ✓ ✓A-9908-0700 Tripod stage kit XL translation stage A-9908-0700 2A 3-10 ✓ ✓ ✓ Spirit level circular A-9908-0323 2B 3-2 ✓ ✓ ✓ Tripod adaptor A-9908-0770 NS 3-10 ✓ ✓ ✓A-9908-0510 XC-80 compensator kit XC-80 compensator A-9908-0564 3A 3-6 ✓ ✓ ✓ Material temperature sensor & cable A-9908-0879 3B 3-2 ✓ ✓ ✓ Air temperature sensor & cable A-9908-0878 3C 3-2 ✓ ✓ ✓ XC mounting plate A-9908-0892 3D 3-2 ✓ ✓ ✓ USB cable A-9908-0286 3E 3-2 ✓ ✓ ✓ LaserXL™ software A-9908-0301 NS 3-11 ✓ ✓ ✓A-8003-0440 Linear measurement Linear refl ector (qty 2) A-8003-0219 4A 3-14 ✓ ✓ optics Linear interferometer A-8003-0557 4B 3-14 ✓ ✓ Alignment target (qty 2) A-8003-0478 4C 3-14 ✓ ✓A-8003-0441 Angular measurement Angular interferometer A-8003-0186 5A 3-14 ✓ optics Angular refl ector A-8003-0181 5B 3-14 ✓ Alignment target (qty 2) A-8003-0478 5C 3-14 ✓A-8003-0443 Straightness optics – Short range straightness refl ector A-8003-0615 6A 3-8 short range (0-4 m) Wollaston short range A-8003-0393 6B 3-8A-8003-0444 Straightness optics – Long range straightness refl ector A-8003-0620 7A 3-8 long range (1-30 m) Wollaston long range A-8003-0430 7B 3-8A-8003-STAK Straightness Laser beam steerer LS350 A-8003-3072 14 3-9 accessory kit Fixed turning mirror A-8003-1325 8B 3-9 Large straightness retrorefl ector A-8003-0604 8C 3-13 Straightness base A-8003-0576 8D 3-13A-8003-0665 Squareness Optical square 9A 3-8 measurement optics Bracket squareness optic M-8003-1680 9B 3-8 Cap head screw (qty 4) 9C 3-4 Hexagonal key 9E 3-4A-8003-0442 Flatness Flatness mirror (qty 2) A-8003-0630 10A 3-8 measurement kit Base (150 mm) A-8003-0256 10B 3-8 Base (100 mm) A-8803-0257 10C 3-8 Base (50 mm) A-8003-0258 10D 3-8A-8803-4270 Long range linear Long range retrorefl ector A-8003-2061 11A 3-7 accessory kit Periscope A-8003-2039 11B 3-7 Long range target M-8003-2081 11C 3-4 Clamp screw (qty 2) M-8003-0221 11D 3-13A-8003-0447 Optics mounting kit Clamp block (qty 2) A-8003-0262 12A 3-13 ✓ ✓ Base plate (qty 2) A-8003-0522 12B 3-8 ✓ ✓ Mounting pillar (qty 3) M-8003-0470 12C 3-13 ✓ ✓ M8 adaptor A-8003-0979 12D 3-13 ✓ ✓ Base case M-9908-0313 3-10 ✓ ✓ Full system case M-9908-0314 3-10 Tripod A-9908-0295 NS 3-10 ✓ ✓ Tripod case M-9908-0527 NS 3-10 ✓ ✓ Swivel mirror A-8003-1304 13 3-9 Fixed turning mirror A-8003-1325 15 3-9 Magnetic base A-9908-0780 16 3-8 ✓ ✓ Magnetic base adaptor A-9908-0760 17 3-10 ✓ ✓

XL laser system components

XL-80

– B

ase

Line

ar s

yste

m

L

inea

r/ang

ular

NS=product not shown



C-C

ON, INC.


3-4

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

12B

1A 2A3D 7B 6B 8B

10A

9A

9C

9B

10D10C 10B

8C

8D

11D

11B

11C11A6A7A

3E1C

3B3C

3A

1B

× 2

× 2

× 2

× 2

× 2

Contents of full XL system case (tray removed)

9E

8A

12D

5B 1316

15

17

16

144A

4B

12A5A4C5C

12A4A

12C

2B

× 4

× 3

Contents of full XL system case (tray)



C-C

ON, INC.

3-5

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Kit part no. Part name Includes Part no. Index PageA-9908-0405 XL-80 laser kit XL-80 laser 1A 3-6 ✓ ✓✓ ✓ Universal power supply A-9908-0299 1B 3-2 ✓ ✓✓ ✓ USB cable A-9908-0286 1C 3-2 ✓ ✓✓ ✓ XL system support disk A-9908-0303 NS ✓ ✓ ✓ AUX I/O connector A-9908-0329 NS ✓ ✓✓ ✓A-9908-0700 Tripod stage kit XL translation stage A-9908-0700 2A 3-10 ✓ ✓✓ ✓ Spirit level circular A-9908-0323 2B 3-2 ✓ ✓✓ ✓ Tripod adaptor A-9908-0770 NS 3-10 ✓ ✓✓ ✓A-9908-0510 XC-80 compensator kit XC-80 compensator A-9908-0564 3A 3-6 ✓ ✓ Material temperature sensor & cable A-9908-0879 3B 3-2 ✓ ✓✓ Air temperature sensor & cable A-9908-0878 3C 3-2 ✓ ✓ XC mounting plate A-9908-0892 3D 3-2 ✓ ✓ USB cable A-9908-0286 3E 3-2 ✓ ✓ LaserXL™ software A-9908-0301 NS 3-11 ✓ ✓ ✓A-8003-0440 Linear measurement Linear refl ector (qty 2) A-8003-0219 4A 3-14 ✓ ✓✓ optics Linear interferometer A-8003-0557 4B 3-14 ✓ ✓✓ Alignment target (qty 2) A-8003-0478 4C 3-14 ✓ ✓✓A-8003-0441 Angular measurement Angular interferometer A-8003-0186 5A 3-14 ✓ ✓ optics Angular refl ector A-8003-0181 5B 3-14 ✓ ✓ Alignment target (qty 2) A-8003-0478 5C 3-14 ✓ ✓A-8003-0443 Straightness optics – Short range straightness refl ector A-8003-0615 6A 3-8 ✓ short range (0-4 m) Wollaston short range A-8003-0393 6B 3-8 ✓A-8003-0444 Straightness optics – Long range straightness refl ector A-8003-0620 7A 3-8 ✓ long range (1-30 m) Wollaston long range A-8003-0430 7B 3-8 ✓A-8003-4209 Straightness shutter A-8003-4209 8A 3-9 ✓A-8003-STAK Straightness Laser beam steerer LS350 A-8003-3072 14 3-9 ✓ accessory kit Fixed turning mirror A-8003-1325 8B 3-9 ✓ Large straightness retrorefl ector A-8003-0604 8C 3-13 ✓ Straightness base A-8003-0576 8D 3-13 ✓A-8003-0665 Squareness Optical square 9A 3-8 ✓ measurement optics Bracket squareness optic M-8003-1680 9B 3-8 ✓ Cap head screw (qty 4) 9C 3-4 ✓ Hexagonal key 9E 3-4 ✓A-8003-0442 Flatness Flatness mirror (qty 2) A-8003-0630 10A 3-8 measurement kit Base (150 mm) A-8003-0256 10B 3-8 Base (100 mm) A-8803-0257 10C 3-8 Base (50 mm) A-8003-0258 10D 3-8A-8803-4270 Long range linear Long range retrorefl ector A-8003-2061 11A 3-7 accessory kit Periscope A-8003-2039 11B 3-7 Long range target M-8003-2081 11C 3-4 Clamp screw (qty 2) M-8003-0221 11D 3-13A-8003-0447 Optics mounting kit Clamp block (qty 2) A-8003-0262 12A 3-13 ✓ ✓✓ ✓ Base plate (qty 2) A-8003-0522 12B 3-8 ✓ ✓✓ ✓ Mounting pillar (qty 3) M-8003-0470 12C 3-13 ✓ ✓✓ ✓ M8 adaptor A-8003-0979 12D 3-13 ✓ ✓✓ ✓ Base case M-9908-0313 3-10 ✓✓ Full system case M-9908-0314 3-10 ✓ ✓ Tripod A-9908-0295 NS 3-10 ✓ ✓✓ ✓ Tripod case M-9908-0527 NS 3-10 ✓ ✓✓ ✓A-8003-1773 RX10 rotary calibrator Indexing table NS 3-12 ✓ Interface cable NS 3-12 ✓ Control unit NS 3-12 ✓ RS232 data cable NS 3-12 ✓ Mounting plate NS 3-12 ✓ Carrying case NS 3-12 ✓ User guide NS 3-12 ✓ Swivel mirror A-8003-1304 13 3-9 ✓ Fixed turning mirror A-8003-1325 15 3-9 Magnetic base A-9908-0780 16 3-8 ✓✓ Magnetic base adaptor A-9908-0760 17 3-10 ✓

NS=product not shown

XL laser system components

Advance

d syste

m

Dual lase

r syst

em

Rotary sys

tem



C-C

ON, INC.


3-6

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

XL laser calibration systems

Base system kitIncludes: XL-80 laser head

XC-80 environmental compensator kit

LaserXL™ software

Software support disk

XL tripod stage kit

Part number: XL80-BASE Price: $23,685

Linear system kitIncludes: Components of base system kit XL80-BASE

Linear measurement optics A-8003-0440

Optics mounting kit A-8003-0447

2 magnetic bases A-9908-0780

Magnetic base adaptor A-9908-0760

Tripod A-9908-0295

Tripod case M-9908-0527

Base system case A-9908-0313

Price: $30,274

Linear/angular system kitIncludes: Components of base system kit XL80-BASE


Angular measurement optics A-8003-0441




Tripod A-9908-0295


Base system case A-9908-0313

Price: $34,012

Advanced system kitIncludes: Components of base system kit XL80-BASE


Angular measurement optics A-8003-0441

Swivel mirror A-8003-1304

Long range straightness optics A-8003-0444

Short range straightness optics A-8803-0443

Straightness accessory kit A-8003-STAK

Straightness shutter A-8003-4209

Squareness measurment kit A-8003-0665




Tripod A-9908-0295


Full system case M-9908-0314

Price: $55,632

XL-80 laser head

XC-80 environmental

compensation unit

XL system case and

tripod case



C-C

ON, INC.

3-7

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

OpticsAll Renishaw optics housings are lightweight aluminum with a hard anodized

fi nish for durability and good thermal stability.

Linear kit (standard 40 m)

Includes: 1 linear beam splitter

2 linear refl ectors

2 alignment targets


Small linear accessory kit

Please call for details.


Long range linear optics kit (80 m max)

For use with the ML10X for linear measurements in excess of 40 m.

Includes: Periscope

Large retrorefl ector


Angular kit

Includes: 1 angular beam splitter

1 angular refl ector

2 alignment targets


Angular kit – High accuracy (0.2%)



2 alignment targets


Linear/angular combination kit

This combination kit is a cost-saving solution, allowing linear and angular

measurement to be made with a single set-up.



1 linear refl ector

2 alignment targets




C-C

ON, INC.


3-8

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Optics continued

Straightness measurement kits

Short range

Suitable for measurements up to 4 m (160 in)


Long range

Suitable for measurements from 1 m to 30 m (40 in to 1200 in)


Straightness accessory kit

Facilitates measurements on vertical axes and in other diffi cult confi gurations.

Includes: 1 fi xed turning mirror

1 large retrorefl ector

1 stainless steel base

1 LS350 beam steerer

Note: XL-80 and ML10 users require straightness shutter, part number A-8003-4209,

shown on page 3-9.

Part number: A-8003-STAK Price: $3,461

Squareness measurement

This precision pentaprism is used in conjunction with straightness optics to measure

squareness of machine axes. It includes a mounting bracket for a fi xed turning mirror

and LS350 beam steerer.


Flatness measurement kit

The turning mirrors rotate and tilt for easy alignment and are fi tted with non-slip pads.

The lightweight aluminum bases have precision stainless feet and guides.

Includes: 2 turning mirrors

1 50 mm fl atness base




Standard optics mounting kit

This universal mounting kit is designed for use with the complete range of Renishaw

measuring optics.

Includes: 2 mounting blocks

3 stainless pillars

1 stainless M8 adaptor

2 stainless bases


Magnetic base

Suitable for mounting optics and XL80 laser head when fi tted with A-9908-0760

magnetic base adaptor (Sold in pairs).




C-C

ON, INC.

3-9

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

CMM optics mounting kit

Designed specifi cally to aid the mounting of laser optics and other accessories

on coordinate measuring machines. Recommended for UCC error mapping

requirements.

Includes: 3 M8 orientation cubes

3 M8 × 100 mm mounting bars



3 M8 × 22 mm captive screws

1 shank adaptor

1 revo mounting plate

1 PH10MQ mount adaptor

1 Z axis refl ector mounting adaptor plate

1 electronic level mounting plate

1 13/10 mm wrench

2 tommy bars

1 set mounting screws

1 carrying case


Beam steerer LS350

This is the best time-saving device a laser system user could buy. It works with

all the measuring optic kits, including HP optics using the HP optic adaptor plate.

Included in straightness accessory kit.


Swivel mirror

This is used for directing the laser beam through any angle from 0° to 106°, for

example for diagonal measurement and slant bed lathes. It works with all the

optics kits, including HP optics using the HP optic adaptor plate.


Fixed turning mirror

This can be used with angular optics for 90° accessories. Included in straightness

accessory kit.


Quarter wave plate

Used with linear optics for plane mirror interferometry applications.


HP optic adaptor plate

Used to attach Renishaw accessories to HP5528 optics.


Straightness shutter

Required for vertical straightness measurements.




C-C

ON, INC.


3-10

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Tripod and casesUniversal tripod

Tripod only, without the stage.


XL translation stage


Tripod adaptor

This allows the XL translation stage to be used with the Renishaw universal

tripod or any other tripod with a standard camera mounting thread.


Tripod converter ML-XL


Magnetic base adaptor

This allows the XL translation stage to be mounted on any base or fi xture with

an M8 × 1.25 mounting hole.


Universal tripod case

Lightweight fabric


System casesBase system case

Suitable for basic laser system including linear and angle optics with

accessories.


Optional storage tray for QC10 ballbar


Full system case

Suitable for an advanced laser system including linear, angle, short range and

long range straightness, squareness and fl atness optics with accessories.


Optional storage tray for QC10 ballbar




C-C

ON, INC.

3-11

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Software

LaserXL™ calibration software

This is the standard software package for use with the Renishaw

XL80 laser system. It provides for linear, angle, straightness,

squareness and parallelism measurement. Data can be analyzed

to many national and international machine tool and CMM

standards. LaserXL™ is not compatible with ML10 lasers.

Windows® XP or Vista only.


Linear correction software

This is used with both Laser10 and LaserXL™. It provides

automatic linear correction to a range of CNC machine tool

controllers.

Controller model Part number Price

Fanuc 10 through 21 A-8003-4182 $751

Fanuc 0 A-8003-4188 $751

Mazak M2, M32, M+ A-8003-4185 $751

NUM 750, 760, 1040, 1050, 1060 A-8003-4184 $751

Siemens 810, 810D, 820, 840, 840D, 880 A-8003-4183 $751

Acramatic 2100 A-8003-4186 $751

Cincinnati 850, 950 A-8003-4187 $751

All options A-8003-4190 $2,889

QuickView XL software

QuickView is the simple, intuitive software package that

allows you to understand the dynamic performance of

many different machines and devices such as stages,

machine tools and CMMs. It brings the functionality of an

oscilloscope to the mechanical engineer, right on your

desktop.

• Capture, review, and save dynamic data

• Measure distance, velocity and acceleration against

time

• Display continuous “streaming” data or set trigger

levels to capture single or multi-shot “events”

• Linear, angular or straightness modes

• Optional hardware – compact low mass optics kit

Applications

• Measure consistency of position, velocity and

acceleration

• Determine movement in a locked rotary axis (torsional

vibration)

• Detect dynamic yaw and lateral play (slop)

• Measure vibration

• Perform ASME B5.54 CNC tests such as Feedrate and

acceleration, Minimum Block Execution Time (MBET)

and Least Increment

Benefi ts include:

• Live data display allowing analysis of motion and

positional characteristics

• Save data for analysis in other applications such as

Excel® and MathCad

• Flexible measurement – avoids the need for defi ned

measurement targets and sequences




C-C

ON, INC.


3-12

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

RX10 rotary calibratorThe RX10 rotary axis calibrator features an extremely accurate,

±1 arc second Hirth coupling design. With its built-in calibration

routine, set-up inaccuracies are easily eliminated. Permits fully

automatic rotary axis calibration. Operates in any orientation.

Interfaces to the PC via an RS232 serial port.

Includes: Indexing table

Control unit

Interface cable

RS232 data cable

Mounting plate

Carrying case

User guide

Note: Requires use of XL-80 or ML10 and angular optics.


High accuracy RX10

Identical to the standard RX10, except that the accuracy

specifi cation is ±0.5 arc seconds.


Lifting table accessory kit

The Renishaw RX10 allows fully automatic calibration of a rotary

axis. However, indexing tables, which lift before rotating, cannot

be calibrated automatically because the laser beam is broken

when the indexer lifts. This problem can be overcome by the

lifting table accessory kit, which allows tables with up to 15 mm

of lift to be calibrated.

Includes: High lift accessory

High lift angular refl ector

Spindle bar


Machine spindle

Spindle bar

Angularbeam splitter

ML10 laser

Indexer table under testClamp plate

RX10

High lift accessory

angular refl ector

High lift accessory



C-C

ON, INC.

3-13

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Spare partsThe following items are normally supplied as parts of system kits but can be

purchased as individual components for replacement purposes.

Clamp block


Locking screw assembly

For use with clamp block.


Locking screw pressure pad

Brass pad and rubber retaining ring.


Clamp screws

Long (for use with clamp block)


Short (for use with linear and angular optics)


LS350 (for use with LS350 beam steerer)


For use with fi xed turning mirror.


For use with swivel mirror.


Mounting pillar

110 mm long with M8 × 1.25 male thread at one end, female at the other.


Straightness accessory base


Large retrorefl ector

For use with vertical straightness measurements.


M8 adaptor




C-C

ON, INC.


3-14

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Spare parts continued

Alignment target


Linear beam splitter


Linear refl ector


Angular refl ector


Angular beam splitter




C-C

ON, INC.

3-15

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Cables

USB single port extension cable (5 m)

Part number: CBL-USBX-1 Price: $60

USB dual port extension cable (5 m)

Part number: CBL-USBX-2 Price: $80

XC80 temperature sensor cable (5 m)


RS232 cable kit for linear correction software

Kit includes data cable, adaptors and gender changers to suit all above controls.


RX10 interface cable

Connects the RX10 to the control unit.


RX10 RS232 data cable

Connects the RX10 control unit to the PC.


Mahr-Federal 832 amplifi er interface cable

Measure horizontal axis pitch, roll and surface fl atness using Mahr-Federal

electronic levels and Renishaw Laser10 software. Does not include Renishaw

laser calibration software, Federal Products 832 amplifi er or its associated

level(s) or gage(s).


TB10 to XL80 TPin cable

Part number and price not yet available.



C-C

ON, INC.


3-16

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

ML10 laser calibration system components

DX10 interface kit (USB)

Connects ML10 and EC10 to any Windows® XP based computer

via USB. Compatible with Laser10.06 and subsequent versions.

(Driver update may be required for older versions of Laser10.)

Operational indicators provide status condition. Supplied with

3 m USB cable.


Cables

The standard length for all sensor and data link cables is 5 m.

The following replacement cables and extensions are available:

ML10/EC10 data link cable

Length Part number Price5 meters A-8003-0717 $122

ML10/EC10 data link extension cables

Length Part number Price5 meters A-8003-0832 $12210 meters A-8003-1007 $13815 meters A-8003-1008 $147

EC10 sensor extension cables

Length Part number Price5 meters A-8003-0735 $4910 meters A-8003-1005 $5815 meters A-8003-1006 $70

TPin/out cable

Five meter cable with 4-pin lemo at one end and fl ying leads

at the other. Used for automatic data capture when using TTL

signal.




C-C

ON, INC.

3-17

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Renishaw supercase

Provides safe and secure storage of your ML10 laser calibration

system. (Does not hold tripod or rotary calibrator.)

Part number: P-EN01-LCSE Price: $907

Two-wheeled cart

Compatible with the Renishaw supercase. Features telescopic

handle and folding claws.

Part number: P-EN01-CART Price: $196

Remote trigger switch

Allows data points to be taken manually by the user without

having to be close to the PC.


ML10 translation stage

This item is required for mounting the ML10 to the tripod.


HP/Renishaw tripod adaptor

This allows the ML10 translation stage to be used with HP

tripods.

Type A


Type B


Universal tripod adaptor for ML10


Material temperature sensor


Air temperature sensor




C-C

ON, INC.


3-18

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Ballbar systemsThe Renishaw QC10 ballbar system connects to your PC via

RS232 (USB to serial adaptor is available, see page 3-19).

The Windows®-based Ballbar5 software is supplied on CD only

and includes on-line help and a user guide. The latest version,

HPS, further advances and improves the diagnostic capabilities,

and includes History plots, Part program generator and error

Simulator. The system comes in a rugged carrying case.

QC10 ballbar kit – standard

Includes: Ballbar (100 mm) with RS232 serial interface

Zerodur calibrator

Magnetic mounting kit

Extension bars – 50 mm, 150 mm and 300 mm

Ballbar 5 HPS software

QC10 user manual included on CD-ROM

Carrying case

Calibration certifi cate


QC10 ballbar kit – comprehensive


Zerodur calibrator


Small circle kit

Lathe kit

VTL adaptor

USB adaptor




Carrying case


Part number: A-8014-CBBK Price: $10,520

QC10 ballbar kit – basic






Carrying case



Printed QC10 user guide


Ballbar 5 HPS software upgrade

This is an upgrade pack for users of the QC10 serial ballbar.

Compatible with Windows® 98, 2000 and XP. Requires Microsoft®

Internet Explorer® 5.5 or later.

Part number: A-8014-WSUG Price: $351

Note: Multi-system site licenses are available for users of

multiple ballbars. Please contact Renishaw for details.

Additional information on the QC10 ballbar system and

software can be found at:

www.renishaw.com/QC10



C-C

ON, INC.

3-19

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Z-axis accessory kit

The Z-axis accessory kit enables 360° tests to be carried out on

lathes and simplifi es the set-up of tests in the XZ and YZ plane

on machining centers.

Includes: Turret arm assembly

Spindle bar assembly

Magnetic screw cup

User guide

Carrying case


Small circle accessory kit

This accessory kit allows the QC10 ballbar to test a 50 mm

radius. It is also possible to perform a 15 mm radius test. Care

should be taken when selecting a feed rate as there is a risk of

ballbar/magnetic cup dislocation at high speeds.

Includes: Transducer adaptor

High magnetic tool cups

Zerodur calibrator

Carrying case


VTL adaptor kit

For use on VT lathes or any other two-axis machine. Makes set-

up very simple.


USB to serial adaptor

Allows QC10 ballbar to be used with notebook PCs that do not

have an RS232 serial port.




C-C

ON, INC.


3-20

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

QC10 ballbar kit spare parts

Item Description Part number Price

1 Transducer and interface assembly A-8014-0286 $4,683

2 Ball and mount assembly A-8014-0182 $140

3 Center cup assembly A-8014-0136 $135

4 50 mm extension bar A-8014-0231 $198



7 Center pivot assembly A-8014-0139 $262

8 Center ball assembly A-8014-0141 $140

9 Spherical adaptor M-8014-0376 $54

10 Magnetic tool cup A-8014-0521 $125

11 C spanner A-1042-1486 $19

13 Zerodur calibrator (includes calibration certifi cate) A-8014-0280 $2,044

15 De luxe carrying case with aluminum reinforcement M-8014-0620 $395

15



C-C

ON, INC.

3-21

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

Machine checking gageThe Renishaw MCG is designed for rapid, volumetric accuracy

evaluation for CMMs. The gage takes account of variations due

to probe, machine and software errors.

Checking time: CMC (DCC) machine: Typically 15 minutes

Joystick machine: Typically 45 minutes

Manual machine: Typically 45 minutes

Measuring range: Vertically: ±45°

Horizontally: 360°

Total gage error: ±0.5 µm

Two kits are available, each supplied in a hardwood box.

MCG1 – small kit

Suitable for machines up to 40 in (1000 mm) cubed.


MCG2 – large kit

Suitable for machines larger than 40 in (1000 mm) cubed.


MCG spares and accessoriesDescription Part number MCG1 MCG2 Price

SA3-M3/M2 stylus adaptor M-5000-4163 * * $12

SE2-20 mm stylus extension M-5000-3592 * * $12

SE7-5 mm stylus extension M-5000-7634 * * $11

Pivot A-1007-0017 * * $300

Special stylus A-5000-7650 * * $85

76 mm arm A-1007-0058 * * $812

101 mm arm A-1007-0007 * * $590

151 mm arm A-1007-0008 * * $617

226 mm arm A-1007-0009 * * $645

380 mm arm A-1007-0010 * * $678

532 mm arm A-1007-0011 * $721

685 mm arm A-1007-0012 * $777

76 mm pillar M-1007-0023 * * $69

127 mm pillar M-1007-0024 * * $119

235 mm pillar M-1007-0025 * $151

Baseplate A-1007-0061 * * $273

Additional weights A-1007-0018 * * $8



C-C

ON, INC.


3-22

Per

form

ance

mea

sure

men

t an

d ca

libra

tion

syst

ems

TrainingRenishaw offers world class training at their modern

facilities in Hoffman Estates, Illinois, only 45 minutes from

Chicago’s O’Hare airport. Regular classes are held once

per month for both laser and ballbar product groups. In-

house courses start on Tuesday morning and conclude

around midday on the Friday. The training includes a

mix of classroom work and hands-on experience in the

Renishaw technology centre where we have a selection

of modern machines for students to work with. If you

have a large group, or prefer not to travel, on-site training

is also available.

Our standard, in-house training courses cover the

following subjects:

• The 21 degrees of freedom

• Accuracy and the environment

• Relative thermal behaviour

• Machine geometry and design

• Determining relative errors

• Interpreting analysis data

• Troubleshooting set-up and machine errors

• Machine tool part programs

• Hardware set-up procedure

• Software set-up and data capture

• Correcting errors on the machine

Two basic training courses are offered:

Learning practical laser interferometry

In addition to the standard metrology subjects, the laser

class will cover the following aspects:

• Laser interferometry theory

• Laser kit parts identifi cation

• Current laser technology

• Linear, angular and straightness measurements

• Cosine, deadpath and Abbé errors

• Error compensation

• Using the laser as a diagnostic tool

• Implementing maintenance programs

• Accessories for the laser

Part number: A-8003-LATC Price: $1,620

Information on training classes and class schedules can

be found on the web at:

www.renishaw.com/training-usa

Using and understanding the QC10 ballbar and machine metrology

The comprehensive course provides students with a

detailed understanding of the most powerful machine tool

diagnostic device you can buy.

Specialist features of the course include:

• Why buy a ballbar?

• When to use a ballbar

• Ballbar theory

• Ballbar kit parts identifi cation

• Ballbar accessories

Training materials, lunch and refreshments are provided

each day.

Part number: A-8003-BBTC Price: $1,620

Advanced training at Renishaw Inc

Charged per student, per day


Training at customer’s premises

Flat rate per day, 3 days minimum




C-C

ON, INC.

Non-contact position encoders

Section 4

Encoders Issue 15.indd 4-1Encoders Issue 15.indd 4-1 30/07/2008 10:36:4730/07/2008 10:36:47


C-C

ON, INC.

4-2

Enc

oder

sys

tem

s

Non-contact encoder systems

Product range

NEW encoder system 4-4

• Auto-phase IN-TRAC™ optical reference mark

• High speed and fi ne resolution

• Small and reliable readhead

RELM high-accuracy linear encoders 4-6

• 20 µm pitch robust Invar scale

• Accuracy to ±1 µm, resolutions to 5 nm and ±30 nm cyclic error

• Bi-directionally repeatable IN-TRAC™ optical reference mark

RG2 20 µm and RG4 40 µm optical linear encoders 4-11

• 20 µm and 40 µm pitch RGS tape scale

• Resolutions to 10 nm and accuracy to ±3 µm/m

• 40 µm chrome on glass scale

RESM, REXM and the RESR optical angle encoder 4-17

• Precision angular measurement in a wide range of diameters

• Angular resolutions to 0.004 arc second and accuracy to ±0.5 arc second

• DSi (Dual interface) for ultra-high accuracy

Accessories 4-24

• Interpolators/interfaces and DROs

• Scale applicators

• Special mounting options and custom solutions

Rotary magnetic encoders 4-25

• OnAxis™ sensing technology

• Low-cost modular OEM solutions

• Industry-standard mounting options

Linear magnetic encoders 4-26

• Robust linear sensing technology

• Easy to install

• Stick on reference mark

Laser interferometer solutions 4-27

• Resolutions to 38.6 picometers

• ‘Bolt down, dial in’ simplicity

• User-selectable confi gurations



C-C

ON, INC.

4-3

Enc

oder

sys

tem

s

Cover photograph (right): Rotary table built by Rotary Precision Instruments-RPI (www.rpiuk.com) using REXM and DSi to achieve ±1 arc second accuracy.

Welcome

Renishaw offers a wide range of compact

optical and magnetic encoder systems

to meet the diverse requirements of

industrial automation. This product

catalog details an extensive selection

of high-speed optical linear encoders,

precision angle encoders, robust rotary

magnetic encoders and a range of laser

interferometers.

Renishaw’s optical encoder systems

are based on an innovative non-contact

optical arrangement which provides zero

mechanical hysteresis and excellent

metrology, yet can withstand a variety

of contaminants such as dust, light oils

and scratches without compromising the

signal’s integrity. This ensures customers’

machines run reliably with little or no

maintenance.

In addition to these benefi ts, Renishaw’s

encoders have an established reputation

for being easy to install and set up. Scale

is available in many lengths with special

formula self-adhesive backing, removing

the need for drilling and tapping, saving

time and money.

All optical readhead and interface

combinations feature a patented set-

up LED which speeds installation and

removes the need for complex set-up

equipment or oscilloscopes.

In addition to leading product

performance, Renishaw provides

unequalled engineering back-up with a

global team of experienced engineers

always on hand to offer application advice

and expert installation support.

Also, to ensure that we never hold up

your production, stock is held at over

30 Renishaw operations worldwide

and, thanks to fl exible manufacturing

techniques, even out-of-stock items can

be manufactured and shipped promptly.

Renishaw’s encoder systems are used in

all sectors of industrial automation such

as semiconductor, electronics, medical,

scanning, printing, scientifi c research,

space research, photography, specialist

machine tools, including precision

metrology and motion systems. Basically,

precision motion control needs precision

feedback encoders.



C-C

ON, INC.

4-4

Enc

oder

sys

tem

s


is Renishaw’s latest super-compact optical encoder,

offering exceptional performance and versatility with refreshing

simplicity.

takes the successful concepts of Renishaw’s proven

range of high-speed non-contact optical encoders to new

levels of performance and usability. Both the linear and rotary

versions of offer exceptional speed, accuracy, stability

and reliability with a low cost of ownership and unrivalled

simplicity.

For ultimate fl exibility, reads a variety of linear and

rotary scale types including a new version of Renishaw’s gold

tape scale featuring the IN-TRAC™ optical reference mark.

With the auto-phase IN-TRAC™ optical reference mark, auto-

calibration and integral diagnostic LEDs, installation could not

be easier – can be set up and running with maximum

performance and minimum fuss in a matter of seconds.

Reliability is assured with Renishaw’s proven fi ltering optics

which can withstand dust, scratches and even light oils on the

scale.

NEW encoder system – the small and reliable readhead

Signal purity and stability are further enhanced by dynamic

signal processing incorporated within the readhead, providing

Sub-Divisional Error of better than ±30 nm.

Whether you are looking for performance or features, high

speed or high accuracy, linear or rotary, does it all

– without compromise.

• Auto-phase IN-TRAC™ optical reference mark

Thermally stable, bi-directional reference mark

• High speed and fi ne resolution

10 m/s maximum speed and resolutions to 5 nm

• Small and reliable readhead

Auto Gain Control (AGC) ensures solid, high-quality signals



C-C

ON, INC.

4-5

Enc

oder

sys

tem

s

is available with a variety of linear and rotary

scale options, featuring the auto-phase IN-TRAC™ optical

reference mark.

• The latest version of RGSZ20-S gold tape scale, with

±3 µm/m linearity.

• RGSZ20-P gold tape scale with hard coating for

exceptional solvent immunity.

• RSLM stainless steel scale with ±1.5 µm/m accuracy,

available in lengths up to 5 m.

• RSLD stainless steel scale, as per RSLM but with distance-

coded reference marks.

• RELM Invar scale with ±1 µm accuracy, available in lengths

up to 1180 mm.

• RESM angle encoder with ±5 arc second installed

accuracy.

• REXM angle encoder with ±1 arc second installed

accuracy.

In all cases, the IN-TRAC™ reference mark is directly

embedded into the incremental channel, enabling automatic

phasing simply by pressing a button on the readhead connector

housing. Furthermore, it remains phased throughout the entire

speed and temperature range. The IN-TRAC™ reference mark

also reduces the total scale width and provides far greater

resistance to yaw de-phasing.

High speed and fi ne resolution

offers high-speed operation, up to 10 m/s for analog

signals and digital versions with resolutions to 0.5 µm. Even

at fi ner resolutions, the maximum speed is impressively high;

3.24 m/s being achieved by digital encoders with

0.1 µm resolution. For very high-precision motion stages, digital

resolutions to 5 nm are available.

The table below shows maximum speeds for

encoders with outputs optimized for use with controllers with

50 MHz counter clock frequency. is also available as

standard with a variety of other clock frequencies to match the

requirements of all industry-standard controllers to optimize

high-speed capability for all users. Contact Renishaw for more

details.

Small and reliable readhead

• Super-compact dimensions: 35 × 13.5 × 10 mm (length ×

width × height).

• Auto Gain Control (AGC) ensures solid, high-quality signals

for long-term reliable operation.

• New improved fi ltering optics scheme provides very low

noise (jitter) to improve positional stability and slow-

speed scanning, yet offers high immunity against dirt and

contamination.

• Sub-Divisional Error (SDE) is controlled to ±30 nm by

dynamic signal processing, for increased accuracy and

reduced velocity ripple.

Resolution 5 µm 1 µm 0.5 µm 0.2 µm 0.1 µm 50 nm 20 nm 10 nm 5 nmAnalog

1 Vpp

Maximum

speed (m/s)10 10 10 6.48 3.24 1.62 0.648 0.324 0.162 10



C-C

ON, INC.

4-6

Enc

oder

sys

tem

s


RELM high-accuracy linear encoders

software

RELM system

The RELM high-accuracy linear scale

redefi nes encoder performance, offering

high-speed, non-contact performance,

combined with advanced features

including the IN-TRAC™ auto-phase

optical reference mark. The system

comprises the SR readhead, Si interface

and RELM 20 µm pitch Invar spar. RELM

is extremely robust yet offers a level of

performance previously available only

from more delicate fi ne pitch encoder

systems. With accuracy to ±1 µm, low

coeffi cient of expansion ≈0.6 µm/m/°C

(0 °C to 30 °C), and resolution to 5 nm,

RELM satisfi es the most demanding

precision motion requirements.

Capable of operation up to 12.5 m/s,

the SR readhead features Renishaw’s

unique fi ltering optics to provide excellent

immunity to dirt, dust and scratches. The

position of the reference mark can be

specifi ed either in the center of the scale

(RELM) or 20 mm from the scale end

(RELE). The Si interface can be mounted

remotely and the small connector on the

readhead cable can easily be fed through

machines where access is restricted.

Like all encoders, the RELM

encoder system offers intelligent signal

processing to ensure excellent reliability

and low cyclic error (sub-divisional error

– SDE). In addition, the integral set-

up LEDs, including the blue ‘optimum’

LED, and software enable

simple installation and real-time system

diagnostics.

Why RELM?

• The IN-TRAC™ auto-phase optical

reference mark is bi-directionally

repeatable, even at maximum speed

(12.5 m/s).

• Dynamic signal control ensures SDE

of ±30 nm. Levels of performance

that previously demanded fi ne pitch

encoders can now be achieved

with the dirt immunity and simple

installation associated with 20 µm

pitch systems.

• RELM spar is manufactured using a

robust, low-expansion stabilized

alloy, Invar, for ease of handling and

installation.

• High accuracy, certifi ed to ±1 µm,

and defi ned thermal behavior

≈0.6 µm/m/°C (0 °C to 30 °C) make

RELM Invar spar suitable for the most

precise motion applications.

• Easy to install. Can be mounted

directly to the substrate using

mechanical clips or a specially

formulated adhesive backing tape.

• Integral set-up indicator LEDs and

comprehensive software

allow quick and simple set-up for

optimum performance, and easy

system diagnostics.

• Dual optical limits provide on-scale

end of travel indication.



C-C

ON, INC.

4-7

Enc

oder

sys

tem

s

RELM technical information

optical scheme SDE graph showing a reduction through ’s

dynamic signal processing

SR readhead and Si interface

The “scale” component of RELM is essentially a plane refl ective

metal grating of 20 µm period. While uniform graduation is

critical to good encoder metrology, the unique optics do not

require the scale to be a good diffraction grating, just strongly

periodic. This property of the readhead optics results from

the way fringes at the detector are derived from the scale.

A transmissive phase grating produces an ‘image’ of the

scale with non-periodic features, such as dirt, fi ltered out.

The nominally square-wave scale pattern is also fi ltered to

leave a pure sinusoidal fringe fi eld at the detector. Here, a

multiple fi nger structure is employed, fi ne enough to produce

photocurrents in the form of four symmetrically phased signals.

These are combined to remove DC components and produce

sine and cosine signal outputs with high spectral purity and low

offset, while maintaining bandwidth to beyond 500 kHz.

The balance and level control of these signals is further

enhanced by active adjustment of individual channel gains,

offsets and also control of the LED light source within the

readhead. As a result, the inherent cyclic error

(sub-divisional error – SDE) achievable is ±30 nm, i.e. 0.15% of

scale period. Interpolation is by CORDIC algorithm within the

interface and is available to 5 nm.

The IN-TRAC™ reference mark is embedded in the

incremental scale in the form of a dark line. This feature is

rejected by the fi ltering incremental optics, but detected by

a split photodetector within the readhead. With appropriate

level sensing and gating circuitry this yields a reference mark

output that is bi-directionally repeatable to unit of resolution

at all speeds. Calibration of phase with respect to the analog

channel is performed automatically on installation by the logic

within the interface, which also provides comprehensive system

monitoring and set-up assistance.

RELM Invar scale

The RELM system comprises the SR readhead, Si interface and RELM spar scale.

RELM scale is manufactured from Invar, a low expansion nickel/iron alloy. The scale is available in a range of defi ned lengths up

to 1,430 mm with custom lengths available on request. RELM has a coeffi cient of expansion of ≈0.6 µm/m/°C (0 °C to 30 °C) and

is individually certifi ed to ±1 µm accuracy, providing extremely high-precision feedback. The robustness of the Invar spar permits a

much smaller cross section than typical glass scales, yet allows easier handling and installation, without risk of breakage.

RELM scale incorporates Renishaw’s IN-TRAC™ auto-phase optical reference mark at the scale mid-point, or 20 mm from the

scale end (RELE). The IN-TRAC™ reference mark provides a bi-directionally repeatable datum across the speed and temperature

ranges specifi ed, without increasing overall system width. Dual optical limit outputs are also available, using customer positioned

markers, to give on-scale end of travel indication. System designers can choose either mechanical mounting, using clips and

a datum clamp, or adhesive mounting using a specially formulated backing tape and epoxy earth point, to suit their specifi c

requirements.

LED

Readhead window

Scale

IN-TRAC™ optical reference mark

Rod lens

PhotodetectorIndex

grating

Err

or/m

m

Displacement/µm



C-C

ON, INC.

4-8

Enc

oder

sys

tem

s


RELM high-accuracy linear encoder range

Scale• Accuracy: Individually certifi ed to ±1 µm, calibrated against

International Standards

• Low coeffi cient of expansion: Invar, ≈0.6 µm/m/°C (0 °C to 30 °C)

• Mounted using datum clamp and clips or specially formulated

adhesive backing tape

• IN-TRAC™ auto-phase optical reference mark

• RELM: reference mark at mid-point of scale

• RELE: reference mark 20 mm from end of scale

• On-scale dual optical limit outputs

• Available in a range of defi ned lengths up to 1,430 mm

• Spar cross section: 1.5 mm × 15 mm

SR readhead and Si interface

• Dynamic signal processing gives cyclic error (sub-divisional error

– SDE) of ±30 nm, offering ‘fi ne pitch’ encoder performance

• Speeds up to 12.5 m/s

• Operating temperatures up to 85 °C

• Multilingual software simplifi es installation and provides

system diagnostics via USB connection to PC

• Integral LEDs on head and interface for optimum set-up and system

diagnostics

• User-selectable AGC maintains 1 Vpp analog signal amplitude

• Readhead rated to IP64, interface rated to IP30

• Analog output with 20 µm signal period

• Digital resolutions from 5 µm to 5 nm

• 3-state or differential line driven alarm signals are available on all

units

* Warnings and limits can be selected as active-high or active-low

• Readhead: 14.8 mm × 36.0 mm × 16.5 mm (H × L × W)

• High fl ex, UL-approved cable – up to 10 m between readhead and

interface and new IP68 in-line connector option



C-C

ON, INC.

4-9

Enc

oder

sys

tem

s

RELM applications

Direct linear encoders are now the default

choice for motion control in a huge

range of applications. The new

RELM encoder system offers system

designers the perfect balance between

high performance and ease of use, fi nding

uses in many applications previously only

suitable for fragile fi ne pitch encoders.

Wafer handling and dicing

As wafer size increases, wafer processing

machines need to be faster, more

accurate, capable of reliable handling yet

suffi ciently compact to make effi cient use

of clean-room fl oor space.

That’s a lot of requirements to meet, but

to stay ahead of the fi eld, equipment

manufacturers are constantly searching

for new technologies to give their future

designs the edge.

High-performance motion components,

such as air bearings, linear motors and

ceramic guides can improve performance,

but the choice of position feedback

encoder is critical. With class-leading

accuracy, repeatability, reliability and

speed, you can depend on RELM to give

your machine the edge.

Semiconductor inspection

As feature sizes shrink, manufacturers

face the challenge of detecting ever

smaller ‘killer’ defects. Automated optical

inspection (AOI) is a key part of this

process and requires high-performance

encoders for precise position feedback.

Low coeffi cient of expansion, high-

accuracy scales are critical for many high-

performance optical inspection machines.

Scientifi c instruments

With recent advances in nanotechnology,

the requirement for precision motion

feedback for scientifi c instruments is

growing. High accuracy, high resolution,

and “super smooth” velocity control are

crucial to cutting edge research.

Wire/die bonding

As manufacturers strive to improve the

specifi cation of their future generation

machines, many look to the position

feedback system to provide much of the

increased performance. Wire bonders

demand low CTE, repeatability and speed

– just three of the many areas where

RELM excels.



C-C

ON, INC.

4-10

Enc

oder

sys

tem

s


RSLM high-accuracy scale for fl at panel applicationsRenishaw’s new RSLM spar scale offers performance comparable to fi ne pitch glass scales at lengths far beyond any glass-based

encoder. RSLM scale is available in defi ned lengths up to 5,000 mm yet it is accurate to ±3 µm – an industry fi rst! Combined with

the ultra-low ±30 nm cyclic error (sub-divisional error – SDE) of the encoder, RSLM is the ideal solution for long travel

applications where metrology cannot be compromised.

For quick position datuming on long axes, RSLM is available with multiple IN-TRACTM optical reference marks – either distance

coded for short-travel indexing or regularly spaced for customer selection. Versions are also available with a single reference mark,

either at the scale mid-point or 20 mm from the scale end, with dual optical limits providing end-of-travel indication.

RSLM offers the ease of use of a tape scale yet the performance of a glass spar; RSLM can be coiled for simple handling

and storage yet behaves as a spar scale once uncoiled. System designers can select clip and clamp mounting, for

ultra-low hysteresis, or adhesive backing tape with epoxy earth point to suit their requirements.

With speeds up to 12.5 m/s, patented fi ltering optics, and simple installation, RSLM

provides all of the benefi ts of a 20 µm encoder with all the performance of a fi ne

pitch system.

• Available in lengths up to 5,000 mm

- Coilable for simple storage and handling

- Behaves as a spar scale once uncoiled

• Spar scale in defi ned lengths

- Robust

- Independent thermal expansion, nominally 10.8 µm/m/°C

• Accuracy: ±3 µm

- Performance to rival delicate fi ne pitch glass scales

• IN-TRACTM auto-phase optical reference marks

- Thermally stable, bi-directional reference mark

- Single reference mark or selectable reference marks every 200 mm

- Distance coded reference marks for short-travel datuming



C-C

ON, INC.

4-11

Enc

oder

sys

tem

s

RG2 20 µm and RG4 40 µm optical linear encoders

Precision control of machines and

motion systems requires high-

performance rotary or linear encoders.

If the application demands ultimate

positioning, combined with precision

and reliability, a non-contact optical

encoder is ideal. Renishaw’s RG2 and

RG4 linear encoders offer a durable

scale with excellent metrology that

can be cut to any user-defi ned length.

RG2 and RG4 scales require none

of the careful handling and cleaning

most traditional scales need. The

unique optical arrangement maintains

signal strength, purity and accuracy in

conditions considered unsuitable for

most open optical encoders.

The drive towards higher accuracy and

throughput has increased the use of

linear motors throughout industry and

for many applications the lead screw

and rotary encoder have been replaced

with high-speed non-contact linear

encoders.

Why RG2 and RG4?

• High-speed, non-contact operation – perfect

for the high speeds required of automation today

• Zero friction and zero mechanical wear for

long term reliable operation

• Open optical design guarantees high

performance whilst withstanding levels of

contamination found in most factories

• Flexible scale on a reel (up to 70 m) for “cut-to-

measure” convenience eliminates the need to

stock multiple scale lengths

• Patented scale applicator tool enables fast and

accurate scale installation

• Integral set-up LED lights green to indicate

correct set-up; no need for oscilloscopes or

dedicated set-up equipment

• Dual limit switches offer unique end of axis

travel indication

• A range of compact readheads with

interpolation give digital resolutions from 10 µm

to 10 nm as well as 12 µA and 1 Vpp analog

outputs

• Unique thermal-matching of scale to substrate

simplifi es thermal compensation of the system

Automated circuit board

tester – Proteus

The RG2 and RG4 encoder systems combine these user-friendly features with exceptional measurement performance. The world’s leading manufacturers of high-accuracy coordinate measuring machines rely on RG2 and RG4 – the familiar gold stripe is visible on many of their machines.



C-C

ON, INC.

4-12

Enc

oder

sys

tem

s


RG2 20 µm and RG4 40 µm technical information

RG2 optical scheme RG4 optical scheme RGS scale metrology

An infra-red LED emits light onto the

scale facets, which refl ects back into

the readhead through a transmissive

phase grating. This produces sinusoidal

interference fringes at the detection plane

within the readhead.

The optical scheme averages the

contributions from many scale facets

and effectively fi lters out signals not

matching the scale period. This ensures

signal stability even when the scale is

contaminated or slightly damaged.

Thermal characteristics often play a

signifi cant role in determining overall

measurement accuracy. The RGS tape

scale is rigidly restrained at its ends and

is therefore forced to match the thermal

behavior of the substrate, removing the

need to compensate for yet another

coeffi cient of expansion.

Low short-term errors are assured by

the unique optical design, typically giving

less than ±0.15 µm (RG2) cyclic error

(sub-divisional error – SDE) or ±0.25 µm

(RG4). This is included within the linearity

specifi cation of ±0.75 µm (RG2) or ±1 µm

(RG4) in 60 mm or ±3 µm in any meter

length.

The RGS gold plated scale is lacquer

coated for handling protection and easy

maintenance. A self-adhesive backing

enables quick and easy installation with

minimum axis preparation. Continuous

lengths are supplied on reels and can be

cut to length at the point of installation.

Scale installation is quick and easy using

dedicated application tooling which utilizes

the motion of the machine axis to ensure

correct alignment.

To complete the installation, reference

mark, limit switch actuators and end

clamps are simply glued into place,

eliminating the need to produce holes or

threads in the substrate.

RGS20-S 20 µm tape scale is read by

RGH22, RGH24, RGH25 and RGH26

readheads, whilst RG4 readheads

(RGH34, RGH40 and RGH41) can

read combinations of RGS40-S 40 µm

tape scale, RGS40-G glass scale,

40 µm RESR angle encoders and other

refl ective etched scale for specialist OEM

applications.

The RG2 and RG4 are open, non-contact optical systems, eliminating friction and wear whilst permitting reliable high-speed, high-

resolution operation. The unique 20 µm pitch fi ltering optics of the RG2 system ensure excellent signal stability even when used in

workshop environments.

Using similar optics, the RG4 40 µm pitch system retains the benefi cial features of the RG2 system but with a number of obvious

differences which give the RG4 additional benefi ts. The greater scale pitch of RG4 allows higher speed, more generous set-up

tolerances, and the orientation of the optical elements enable it to read a wider variety of scale types.

All readhead types come with industry-standard analog or square wave outputs, with analog signal period equalling scale pitch and

digital resolutions from 10 µm to 10 nm. All systems incorporate a unique, integral set-up LED, which lights green when optimum

installation has been achieved. Reference mark and/or limit switch outputs are available on all models of readhead. The reference

mark provides a repeatable home or zero position, whilst the limit is used as an end of travel indicator.

Readhead window

LED

Photodetector

Photocurrent output

RGS20 scale profi le

Pitch 20 µm

Lacquer scale coating

Gold-plated scale facets

Index grating

Scale

PhotodetectorLED

Readhead window

RGS40 scale profi le

Pitch 40 µm

Lacquer scale coating

Gold-plated scale facets

Scale

Index grating

Photocurrent output

Sub-divisional error (SDE)

Measuring error

End point

Self-adhesive backing

Epoxy bonded end clamps

Scale

Measuring length

Slope

Measuring travel

Mean measuring

error

Linearity error

Typically scale pitch

Error b

and

End point slope



C-C

ON, INC.

4-13

Enc

oder

sys

tem

s

RGH22• Compact and robust housing

• Integral interpolation and set-up LED

• Resolutions available 5 µm, 1 µm, 0.5 µm, 0.1 µm and 50 nm

• Reference mark and dual limit switch sensors

• 16.0 mm × 44.0 mm × 27.0 mm (H × L × W)

RGH24• Super-compact and robust housing


• Resolutions available 5 µm, 1 µm, 0.5 µm, 0.2 µm, 0.1 µm, 50 nm, 20 nm and 10 nm

• Reference mark or single limit switch sensor

• 14.8 mm × 36.0 mm × 13.5 mm (H × L × W)

RGH25• Ultra-compact and robust housing

• External interpolation with set-up LED

• Resolutions available 5 µm, 1 µm, 0.5 µm, 0.1 µm and 50 nm


• 10.5 mm × 36.0 mm × 13.5 mm (H × L × W)

• Ultra-high vacuum version available – see page 4-16

RGH25F• Ultra-high resolution

• Resolutions available 0.2 µm, 0.1 µm, 50 nm, 20 nm and 10 nm

• Reference mark

• Self tuning adaptive electronics give low cyclic error (SDE)

• Automatic gain control and automatic offset control

• 10.5 mm × 36.0 mm × 13.5 mm (H × L × W)

• Ultra-high vacuum version available – see page 4-16

RGH26• Mitsubishi MELSERVO® serial comms compatible readhead

• Compact and robust housing

• Integral interpolation and serial conversion

• Resolutions available 5 µm, 1 µm, 0.5 µm (Mitsubishi serial outputs)


• 16.0 mm × 44.0 mm × 27.0 mm (H × L × W)

RG2 20 µm range



C-C

ON, INC.

4-14

Enc

oder

sys

tem

s


RGH41

• Reads RGS40-S tape scale


• Generous set-up tolerances


• Resolutions available 10 µm, 5 µm, 2 µm, 1 µm, 0.4 µm, 0.2 µm, 0.1 µm and 50 nm


• 17.0 mm × 44.0 mm × 27.0 mm (H × L × W)

RGH34

• Reads RGS40-S tape scale and other refl ective 40 µm scales

• Compatible with 40 µm RESR angle encoder

• Ultra-compact component readhead


• Low mass <2 grams

• Resolutions available 10 µm, 5 µm, 2 µm, 1 µm, 0.4 µm, 0.2 µm and 0.1 µm

• FPC cable


• 9.5 mm × 15.0 mm × 15.0 mm (H × L × W) readhead only

• Physically identical 20 µm pitch variant also available (RGH35) for rotary applications

RGH40

• Reads RGS40-G glass scale and 40 µm RESR angle encoder




• Resolutions available 10 µm, 5 µm, 2 µm, 1 µm, 0.4 µm, 0.2 µm, 0.1 µm and 50 nm


• 17.0 mm × 44.0 mm × 27.0 mm (H × L × W)

RGS40-G

• 40 µm pitch chrome on glass scale

• Available in a range of measuring lengths from 120 mm to 1 m

• Coeffi cient of thermal expansion ≈ 8.5 µm/m/°C

• Accuracy < ±5 µm/m

• Datum clamp with metal clips or alternative adhesive mounting options

• For use with the RGH34 and RGH40 readheads

RG4 40 µm range



C-C

ON, INC.

4-15

Enc

oder

sys

tem

s

RG2 20 µm and RG4 40 µm applications

Direct linear encoders are the preferred

choice for many of today’s automation

systems. To maintain high yield, speed,

accuracy, repeatability and reliability,

designers need the very best motion

components available.

Semiconductor handling, electronics

assembly, specialist machines, laser

cutting, optical inspection, PCB probe

testing, printing, scanning and scientifi c

instruments are just a few of the systems

where RG2 and RG4 linear encoders are

enhancing performance.

PCB inspection and test

The increasing complexity, density and

value of PCBs requires quick, reliable,

in-line fault detection and correction

throughout the assembly process.

Automated optical inspection (AOI) and

fl ying probe testers play a vital part in this

process with fast, accurate and reliable

linear encoders providing the performance

needed.

Wafer handling and dicing

Throughput, yields, reliability and

performance relentlessly rise. To keep

pace, equipment manufacturers continually

advance the performance of their

machines. New technology air bearings,

linear motors and ceramic guides contribute

signifi cantly to performance improvements,

but without high-quality position feedback

these advances would not be possible.

Flat bed computer-to-plate (CTP)

To simplify machine design and reduce

costs, some manufacturers of rotary

CTP machines have introduced fl at

bed format machines. Unlike rotary

machines, the fl at bed format uses

high-speed linear motors to drive

the scanning head in both X and

Y. Clarity of the image is essential

and manufacturers rely on high-

performance linear encoders to control

the linear motors. RG2 and RG4 offer

the speed, reliability and low cyclic

error (sub-divisional error – SDE)

required by these applications.

Flat Panel Display

To increase volume production of

TFT screens to meet global demand,

FPD process machines (from CVD to

inspect and repair) are being designed

to process ever larger panels. Machine

size may grow, but as screen resolution

is increasing too, accuracy, speed,

stability and repeatability cannot be

compromised. The RG2 and RG4 meet

many of these requirements and are

extensively used throughout the FPD

manufacturing process.

Proteus probe tester

Exitech laser cutting machine

Airbus A380 wing-panel

assembly machine



C-C

ON, INC.

4-16

Enc

oder

sys

tem

s


RG2 20 µm UHV range

Renishaw’s vacuum range is based on

the established RG2 linear and RESR

angle encoder systems. Specially

constructed from clean UHV compatible

materials and adhesives to give low

outgassing rates and a clean RGA,

these readheads also feature reduced

current consumption to minimize heat

dissipation.

The RG2 vacuum range is suitable for

a wide range of applications including

wafer handling/testing, scientifi c

instruments, spectroscopy, vacuum

inspection equipment and many more...

Why RG2 UHV?

• Clean RGA

• Low outgassing rates

• Bake-out temperature of 120 °C

• Non-contact open optical system

• Digital resolutions from 5 µm to 10 nm

• Automatic Offset Control (AOC) minimizes

cyclic error (sub-divisional error – SDE)

(<±0.1 µm)

• Self-tuning adaptive electronics for high

accuracy and long-term reliability

• Integral set-up LED enables quick and easy

installation

• RFI screened UHV compatible cable as

standard

RG2 UHV range

Thermo Vacuum Generators

– vacuum chamber

Residual gas analysis (RGA)

The RGA (residual gas analysis) indicates what gases

are emitted. The results of this analysis are presented

in graphical form (see opposite) showing the quantity of

molecules of specifi c atomic mass units (AMU) present in

the chamber after a 48 hour bake-out at 120 °C.

RGH25U, RGH25F and RGH20F UHV readheads all give

a very clean RGA with no signifi cant levels of hydrocarbon

contamination. The outgassing products are those normally

occurring in UHV systems (H2, H20, CO, CO2).

The UHV range

Renishaw vacuum systems are available for both rotary and

linear applications. Check the table below for the correct

combination of readhead, scale and interface.

Readhead Interface Scale

Linear (med-res) RGH25U RGB25 RGS20-S

Linear (hi-res) RGH25F RGF RGS20-S

Rotary RGH20F RGF RESR 20 µm

Readhead after bake-out(total pressure = 1.29 × 10-11 mbar)

RGS Linear scale (300 mm length) after bake-out(total pressure = 1.69 × 10-10 mbar)

RESR (Ø115 mm) after bake-out(total pressure = 7.76 × 10-10 mbar)

Mass/AMU

Mass/AMU

Mass/AMU

Par

tial p

ress

ure/

mba

rP

artia

l pre

ssur

e/m

bar

Par

tial p

ress

ure/

mba

r



C-C

ON, INC.

4-17

Enc

oder

sys

tem

s

RESM and the RESR optical angle encoder

RESM system

Föhrenbach RESM application

Years of assisting our customers with

high-performance rotary installations

have provided the inspiration for our

unique design of angle encoders that

satisfi es the many requirements of

angular positioning applications.

Renishaw’s angle encoders feature a

highly accurate scale graduated axially

onto the periphery of the stainless steel

ring – the unique process achieving

a graduation accuracy of better than

±0.5 arc second (Ø417 mm ring).

Available in a range of 20 diameters, all

Renishaw angle encoders have a very

low section and a large internal diameter

giving the designer freedom to position

the encoder around large internal

rotors, payloads or services. These

slender proportions also give the rings

a low moment of inertia, ensuring that

whatever the installation, the system can

be positioned with minimal torque and

maximum speed.

The patented taper mount corrects

for eccentricity of the rotor/shaft and

ensures excellent accuracy, offering

easy and robust fi ne adjustment of the

ring’s form and all installation tolerances.

Combined with the readhead and

interface, which feature advanced signal

processing, cyclic error (sub-divisional

error – SDE) is only ±30 nm (±0.06 arc

second on a Ø206 mm ring) to offer truly

impressive system performance.

Why Renishaw angle encoders?

• High-speed, non-contact optical

performance

• Zero backlash

• IN-TRAC™optical reference mark remains

phased and bi-directionally repeatable up to

85 °C and over 4,500 rev/min

• Graduation accuracy to ±0.5 arc second

(Ø417 mm ring)

• Angular resolution to 0.004 arc second

• Wide range of diameters and line counts

provide compatibility with industry-standard

controllers (Ø52 mm to Ø550 mm with line

counts from 4,096 to 86,400)

• One-piece stainless steel ring withstands

vibration, mechanical and thermal shock,

and thermal overload

• Patented taper mount minimizes errors

and simplifi es integration

• Low mass and moment of inertia

• UHV compatible (RESR and RGH20F)

• SDE of ±30 nm for exceptional velocity

stability

• Integral LEDs for optimum set-up and

system diagnostics

• Multilingual software enables easy

installation and real-time diagnostics

• SR readhead sealed to IP64 for ‘wipe-clean’

recovery



C-C

ON, INC.

4-18

Enc

oder

sys

tem

s


Optical angle encoder performance

The sources of error associated with angular

motion systems can be categorized simply as

either repeatable or non-repeatable.

Repeatable errors

For non-contact angle encoders like

RESM or the RESR, repeatable errors consist of:

• Errors inherent with the angle encoder

• Errors due to the installation of the product

In these respects, RESM and the RESR

offer excellent performance. The graduation

process that produces the scale combined with

Renishaw’s renowned fi ltering readheads, give

exceptional system accuracy.

Renishaw’s patented taper mount minimizes

installation errors, simplifi es integration and

reduces set-up time.

Non-repeatable errors

Non-repeatable errors are of particular concern in

an angular motion system, because they cannot

be compensated for. Enclosed encoders with

integral bearings typically suffer from the following

non-repeatable errors:

• Coupling backlash

• Shaft wind-up (torsion)

• Coupling and angular errors (departure from

true ‘constant velocity’)

• Mechanical hysteresis

The RESM and RESR, as non-contact systems,

do not exhibit these errors and provide system

repeatabilities unmatched by any sealed encoder.

The repeatability of Renishaw’s angle encoders

provides:

• Repeatability for your machine

• Precise angular incremental moves

• Improved metrology of the machine

The repeatability of RESM

and the RESR enables system errors

to be mapped to enhance accuracy

– the use of multiple readheads on

one ring can improve accuracy further

by compensating for eccentricity and

the effect of bearing wander (see DSi,

page 4-22).

Dynamic performance is also essential

for precision rotary axes; an area where

RESR and in particular, RESM

excel. Fundamental scale pitch, not

resolution, is critical for an encoder.

’s fi ne scale pitch and signal

processing enable precise motion control.

If the scale pitch is coarse (as with

inductive and magnetic encoders), the

noise on a reported position (jitter) and

cyclic error (sub-divisional error – SDE)

will be very high. Correspondingly,

positional stability and velocity ripple will

be many times worse. Consequently, the

dynamic response of RESM is

perfectly suited to precision rotary axes,

as illustrated by test results below.

These results, taken by a customer, show

a direct-drive motion system exhibiting

less current ripple, less torque ripple and

closer adherence to a perfect contour

when is used. The result is less

heat generation and better surface fi nish.

DDR motor application

Modular non-contact encoders

:

Delta current = 0.0926 A

Delta torque = 3.51 Nm

Contour deviation = 0.0006 deg

Enclosed optical:




Magnetic:






C-C

ON, INC.

4-19

Enc

oder

sys

tem

s

Optical angle encoders technical information

Patented taper mount reduces errors

Renishaw’s angle encoders feature

a unique taper mount, to give an

unmatched combination of accuracy,

ease of installation and dynamic

performance.

A tapered seating is the only geometry

that guarantees mating parts a perfect

radial location despite tolerances in their

diameters. The machine tool taper nose

is testimony to this.

Additionally, a short taper still

achieves perfect location but can

also accommodate slight axial run-

out (swash), automatically creating a

corresponding component of radial

displacement.

Renishaw angle encoders combine the

short taper seat with a ring of axial fi xings

to exploit this geometric effect and allow

eccentricity to be easily and reliably

adjusted on installation. A Ø200 mm

ring, mounted on a seat with 10 µm

eccentricity, needs only 0.01° swash to

produce a perfect installation.

The result is a unique combination of

advantages:

• Elimination of close tolerances on

customers’ parts

• Small cross section that can be

placed wherever best with maximum

diameter through-hole

Principles of operation – SR, RESM and IN-TRAC™The “scale” component of RESM is

essentially a plane refl ective metal grating

of 20 µm period. While uniform graduation

is critical to good encoder metrology, the

unique optics do not require

the scale to be a good diffraction grating,

just strongly periodic. This property of

the readhead optics results from the

way fringes at the detector are derived

from the scale. A transmissive phase

grating produces an ‘image’ of the scale

with non-periodic features, such as

dirt, fi ltered out. The nominally square-

wave scale pattern is also fi ltered to

leave a pure sinusoidal fringe fi eld at

the detector. Here, a multiple fi nger

structure is employed, fi ne enough to

produce photocurrents in the form of four

symmetrically phased signals. These are

combined to remove DC components and

produce sine and cosine signal outputs

with high spectral purity and low offset,

while maintaining bandwidth to beyond

500 kHz.

The balance and level control of these

signals is further enhanced by active

adjustment of individual channel gains,

offsets and also control of the LED light

source within the readhead.

As a result, the inherent cyclic error

(sub-divisional error – SDE) achievable

is ±30 nm, i.e. 0.15% of scale period.

Interpolation is by CORDIC algorithm

within the interface and is

available down to 5 nm.

The IN-TRAC™ reference mark is

embedded in the incremental scale

in the form of a dark line. This feature

is rejected by the fi ltering incremental

optics, but detected by a split

photodetector within the readhead.

With appropriate level sensing and

gating circuitry this yields a reference

mark output that is bi-directionally

repeatable to unit of resolution at all

speeds. Calibration of phase with respect

to the analog channel is performed

automatically on installation by the logic

within the interface, which also provides

comprehensive system monitoring and

set-up assistance.

• A solid seating, immune to shock,

vibration or temperature swings, even

with different CTE seating material

• Easy adjustment for run-out on

installation – only a dial gage is

needed – including compensation for

eccentric and out-of-round seating

faces

• Low mass and moment of inertia

• Quick and easy installation and

disassembly; the taper is self freeing

• Axial graduations on the encoder

periphery: nothing to clash if the

rotor moves longitudinally, easing

installation and maintenance access.

Patented taper mount – cross section optical schemePatented taper mount assembly

Rotor A-section RESM/RESR

M3 screw

LED

Readhead window

Scale

Index grating

Photodetector

Rod lens

IN-TRAC™ optical reference mark



C-C

ON, INC.

4-20

Enc

oder

sys

tem

s


• Graduation accuracy to ±0.38 arc second

• Resolution to 0.004 arc second

• Repeatability to 0.004 arc second

• Range of diameters and line counts from Ø52 mm to Ø550 mm

• IN-TRAC™ auto-phase optical reference mark

• Patented taper mount minimizes installation errors and simplifi es integration

• 10 mm × 10 mm small cross section ring

• Extra-low inertia (B-section) rings available

• Compatible with SR readheads

• Readhead sealed to IP64 for ‘wipe-clean’ recovery

• Cyclic error (sub-divisional error – SDE): ±30 nm

• Operating temperatures up to 85 °C and over 4,500 rev/min

• Multilingual software simplifi es installation and provides real-time

diagnostics

RESR 20 µm and 40 µm• Graduation accuracy to ±0.5 arc second

• Resolution to 0.01 arc second

• Repeatability to 0.01 arc second

• Range of diameters and line counts from Ø52 mm to Ø550 mm

• UHV compatible (RESR and RGH20F)

• Patented taper mount minimizes installation errors and simplifi es integration

• 10 mm × 10 mm small cross section ring

• Extra-low inertia (B-section) rings available

• Compatible with RGH20, RGH35, RGH34 and RGH40 readheads

A-Section and B-Section rings RESM and RESR are both available with two standard cross sections; the A-Section or

the extra-low inertia B-Section. A-section rings with the patented taper mount offer higher

accuracy and easiest adjustment. However, for applications demanding the highest

dynamic response, the B-Section is recommended.

B-Section rings reduce mass and inertia by 50%, enabling a well-designed angular

motion system to achieve even higher acceleration, deceleration and shorter settling

times. B-Section rings are installed with an interference fi t directly to the rotor. They are

available in 5 standard outside diameters from 75 mm to 200 mm with maximum speeds

corresponding with the A-Section sizes.

Outside diameter 75 mm 100 mm 115 mm 150 mm 200 mm

A-Section mass (kg) 0.15 0.2 0.25 0.3 0.4

B-Section mass (kg) 0.07 0.1 0.12 0.15 0.2

A-Section inertia (kgmm2) 160 420 640 1600 3800

B-Section inertia (kgmm2) 78 200 310 720 1800

B-section mount – cross section

Rotor

M3 screw

B-section RESM/RESR

Optical angle encoder range

RESM 20 µm



C-C

ON, INC.

4-21

Enc

oder

sys

tem

s

Note: speeds based on resolutions up to 0.5 µm.

Note: System error is graduation error plus sub-divisional error (SDE). Effects such as eccentricity infl uence installed performance; for application advice please contact Renishaw.

Optical angle encoder specifi cations

RESM/RESR maximum speeds and accuracy

Si-FN with FANUC serial communicationsThe non-contact format and large through-hole of

the RESM ring, combined with high accuracy and

a rugged IP64 sealed readhead make

encoders perfect for machine tool rotary axes.

The new Si-FN interface adds FANUC serial

communications…

Ideal for use in gear-driven and direct-drive

rotary axes, Si-FN provides FANUC serial

communications direct from the encoder for higher

performance and easier connectivity.

Si-FN interfaces are available with three resolution

options:

• Normal: 20-bit (0.0003°) up to 4,500 rev/min

• High Type A: 23-bit (0.000043°), up to

1,200 rev/min

• High Type B: 26-bit (0.0000054° or 0.02 arc

second), up to 600 rev/min

As with the rest of the range, the

intelligent Si-FN interface features advanced

signal processing such as Automatic Gain Control,

Balance Control and Offset Control, to output

reliable signals of high fi delity. The result is the

best cyclic error (sub-divisional error – SDE) in

its class; the SDE of the Ø209 mm Si-FN system

is only ±0.06 arc second… fi ve times better than

competitor optical encoders and more than ten

times better than magnetic and inductive encoders.

As well as providing fi ner resolutions, ‘High

Type A’ and ‘High Type B’ Si-FN versions

feature advanced fi ltering electronics for the

purest signals to improve position stability

and velocity ripple by a factor of 2.

Si-FN interfaces with FANUC serial

communications can be used with standard

SR readheads and standard

RESM rings of 52 mm, 104 mm, 209 mm or

417 mm diameters. This allows the machine

or rotary axis builder to easily select Si-FN

as a ‘last minute’ upgrade option.

All position processing occurs in the Si-FN

interface so high-resolution and high-speed

combinations are possible that would require

unfeasibly high-frequency signals if used

with traditional digital quadrature. Serial

communications also provide exceptional

reliability in noisy environments, especially

when combined with ’s double-

shielded UL-approved cable.

The Si-FN adds a fully-functional DRO

(digital readout) to software for

further diagnostics via a PC’s USB port.

Si-FN encoder

software DRO function

Nominal outside

diameter (mm)

Maximum speed (rev/min)

System accuracy (arc second)

RGH20D SiGNUM™ RGH20D SiGNUM™

52 2938 4591 5.6 4.28

57 2680 4188 5.1 3.91

75 2037 3183 3.9 2.97

100 1527 2387 2.9 2.23

101 1512 2363 2.9 2.21

103 1483 2317 2.8 2.16

104 1469 2295 2.8 2.14

115 1328 2075 2.5 1.94

150 1018 1591 1.9 1.49

200 763 1193 1.4 1.11

Nominal outside

diameter (mm)

Maximum speed (rev/min)

System accuracy (arc second)

RGH20D SiGNUM™ RGH20D SiGNUM™

206 741 1158 1.4 1.08

209 731 1142 1.4 1.07

229 667 1042 1.3 0.97

255 599 936 1.1 0.87

300 509 795 1.0 0.74

350 436 682 0.8 0.64

413 370 578 0.7 0.54

417 366 572 0.7 0.53

489 312 488 0.6 0.46

550 278 434 0.5 0.41



C-C

ON, INC.

4-22

Enc

oder

sys

tem

s


DSi and REXM ultra-high accuracy encoder

Renishaw’s new DSi combines two

SR readheads on a RESM ring and outputs

a customer located, angularly repeatable

propoZ TM reference (index) position, which is

completely unaffected by bearing wander or

power cycling.

Precision rotary axes often demand very high

accuracy without calibration or error-map.

The DSi allows the addition of a second

readhead to eliminate odd error harmonics

including eccentricity and compensate for

the effect of both static and dynamic bearing

wander. The result is total installed error of

typically ±2.0 arc seconds (Ø209 mm RESM).

The combined incremental signals of the two

readheads simply appear, at the DSi output,

as a single very high-accuracy encoder.

DSi provides the propoZ TM reference (index)

output, which is completely unaffected

by bearing wander or power cycling. The

customer selects the desired propoZ TM

reference position by driving the axis to the

chosen angle and simply pressing a button.

This feature makes alignment of the encoder’s

reference position (to the T-slots on a machine

tool rotary table, for example), faster and more

precise. The selected angle is then stored in

the DSi’s memory so the patented propoZ TM

reference (index) is locked to that angle,

ensuring perfect angular repeatability... even if

the center of rotation of the axis moves whilst

the DSi is switched off.

For applications that require the highest

angular accuracy, the REXM angle encoder

offers new levels of angular metrology – better

than ±1.0 arc second total installed accuracy.

Like the RESM, the REXM stainless steel

ring has graduations marked axially onto

the periphery. However, it features a thicker

cross section designed to minimize all

installation errors except eccentricity.

The remaining eccentricity is easily

corrected using the DSi to combine the

output of two readheads. Once the DSi

has eliminated eccentricity, the only errors

remaining are graduation and cyclic error

(sub-divisional error – SDE) both of which

are exceedingly small.

When REXM is used with the DSi, it

is possible to achieve a total installed

accuracy of better than ±1.0 arc second.

Tests on a 183 mm REXM ring have

achieved an impressive total installed

accuracy of ±0.22 arc second (see graph,

bottom left of page).

Furthermore, as a non-contact encoder that

locks to the rotor without fl exible couplings,

DSi and REXM maintain the dynamic

performance advantages of

encoders, as well as eliminating coupling

losses and ‘reversal errors’ that are critical

in applications that demand the ultimate

metrology.

-0.3

-0.2

-0.1

0

0.1

0.2

0.3

0 50 100 150 200 250 300 350

Rotation

Erro

r (ar

c se

cond

s)

±0.22 arc seconds

The toal installed accuracy of a sample 183 mm REXM system is ±0.22 arc second, determined by analysis of sequentially rotated installations.

Dual readheads

Dual interface

Rotor

M3 screw

REXM

REXM mount – cross section

REXM



C-C

ON, INC.

4-23

Enc

oder

sys

tem

s

Optical angle encoder applications

RESM and the RESR offer

short axial lengths and easy integration,

simplifying performance upgrades on

rotary tables and other axes. Such

upgrades can be simple modular options

on otherwise standard axes and, thanks

to the encoder’s large internal diameter,

the through-hole of the rotor is retained.

Machine tool rotary axes

Precision rotary axes on machine tools

require reliable and accurate encoders

for position feedback. Renishaw’s low

profi le, non-contact angle encoders offer

exceptional accuracy in an easy-to-install

format with a large internal diameter.

RESM and the RESR are

open non-contact systems, so they do

not suffer from mechanical hysteresis or

seal and bearing friction. In addition, the

direct mounting of the ring, close to the

rotary table, ensures compact design and

optimum servo control.

Vibration and mechanical shock may

damage some enclosed encoders, but

RESM and RESR are rugged by design.

Unlike frameless glass rotaries with hub

mounting, radial screws etc, the one-

piece stainless steel rings won’t crack or

shatter. Also there are no bearings, seals

or couplings to break when the machine

is pushed to the limit.

No wonder Renishaw angle encoders are

so widely used on machine tool axes…

• Direct encoder feedback on gear-

driven rotary tables (single and

2-axis)

• Direct-drive rotary tables

• 4th and 5th axes of vertical and

horizontal machining centers

• C axes of vertical machining centers,

including triple-function machines

(turning, milling, grinding)

• C axes of lathes for indexing/

positioning operations

• B axis of multi-function lathes

• Single and dual axis rotating spindle

heads

• High-accuracy rotary axes on gear

hobbing machines, EDM machines

and diamond turning machines

FPT Dino high-speed

milling machine

DDR (torque) motors

In high-accuracy applications,

transmission systems reduce system

bandwidth, introduce audible noise and

ultimately, increase maintenance costs.

Direct-drive rotary motors develop high

torque, provide rapid acceleration, offer

smoother constant velocity and enable

precise servo control. Because the load

is rigidly fi xed to the motor, direct-drive

systems are mechanically rigid.

Direct-drive motors offer signifi cant

benefi ts, but place greater demands

on the motion control system and in

particular, the encoder. Non-contact

optical encoders complement DDRs

perfectly. Fine scale pitch gives

signifi cantly better position stability and

’s exceptionally low cyclic error

(sub-divisional error – SDE) enables

smoother velocity control.

Because Renishaw’s angle encoders

are taper-locked directly to the rotor,

the system does not suffer from servo

“hunting”, oscillation, backlash, nor any

other mechanical hysteresis errors that

plague traditional enclosed encoders with

a fl exible coupling.

Direct encoder feedback on gear-driven axes

By fi tting direct encoder feedback to the

rotor of a gear driven axis, accumulated

transmission errors and backlash can

be eliminated. The direct non-contact

feedback of Renishaw’s angle encoders

eliminates mechanical hysteresis to

improve repeatability, enabling precise

small incremental movements.



C-C

ON, INC.

4-24

Enc

oder

sys

tem

s


Optical encoder accessories and custom solutions

Scale applicator kits and applicators ensure the easiest, most precise installation for all readhead types.

Various end clamps for RGS scale.

3 axis digital readout for resolutions to 0.1 µm and maximum input frequency of 10 MHz.

To provide complete solutions for optical linear and angle encoders a full range of accessories is available, from reference mark actuators to digital readouts. Renishaw is committed to providing position feedback solutions to satisfy customer specifi c requirements, such as custom angle encoder diameters and cross sections. Please contact Renishaw for further information on how we can meet your specifi c requirements.

Assembled extension cables, bulk cable and connectors to suit all system combinations.

Swipe blocks enable a functional test of readheads without having to install a complete axis.

Magnetic reference mark actuators are required to produce a repeatable home position for all RG2/4 readheads. Limit switch actuators (end-of-travel output) are available in various lengths and types.

The RGH22 ribbon cable variant features an integral connector for standard ribbon cable.

The magnetic track system is designed for use with longer axes on which the scale requires occasional re-installation. Standard RGS scale is held magnetically in an aluminum extrusion.

Very long axes present some unique challenges, often requiring a method of maintaining readhead installation tolerance or the ability to read across gaps in the scale. The sprung wheeled guide and dual readhead interface offer practical solutions.

Not all application needs can be met with standard products. Often a custom solution is necessary, so talk to us about your requirements; anything from a special connector to a purpose designed angle encoder ring.



C-C

ON, INC.

4-25

Enc

oder

sys

tem

s

Based on the proven OnAxis™ Hall sensor technology, a range

of incremental and absolute encoder solutions are produced

for use in harsh environments. There are many housing options

available for use in a wide range of applications including

automotive, industrial, medical and marine. Custom designs

can also be offered where needed to match specifi c design

requirements.

Rotary magnetic encoders

OnAxis™ – The IC senses the angular position of a permanent

magnet placed above it. The sine and cosine signals produced

are then converted to absolute angle position data with a fast

fl ash interpolator.

The sensor chip can be used directly on a circuit board or

packaged into a protective housing.

The ability of the encoder to operate with a gap between the

magnetic actuator and the encoder chip allows its incorporation

into designs that need isolation of the moving elements.

Standard interface fl anges with bearing/shafts can be provided for

easy integration to existing designs.

Why rotary magnetic?

• Resolutions to 13 bit (8,192 cpr)

• High-speed operation to 60,000 rpm

• Non-contact, frictionless design

• Excellent dirt immunity to IP68

• Operational temperature from -40 °C to +125 °C

• Industry standard absolute, incremental and

analog output formats

• Accuracy to ±0.2°

• Simple installation – with self-locating design

Optional 58 mm mounting fl anges



C-C

ON, INC.

4-26

Enc

oder

sys

tem

s


made in Slovenia by

Linear magnetic encodersThe linear encoder range is based on the magnetoresistive

sensing principle. The readhead detects the magnetic signature

of the magnetized scale as it moves over it. The analog signals

are then processed to produce a range of digital resolutions to

1 µm. The system is easy to use with stick-on reference mark,

set-up LED and scale applicator tool.

The magnetic encoder range is designed

and manufactured by RLS d.o.o (www.rls.si)

in Slovenia, Renishaw’s partner in encoder

technology.

A sine and cosine signal is produced as the sensor moves

along the scale. These analog signals can then be interpolated

internally to produce a range of resolutions to 1 µm.

A stick-on reference mark can be easily installed at the required

position using the provided tool. Alternatively the reference mark

can be ordered at a set position within the scale.

The system is easy to install with a set-up LED on the readhead

and an applicator tool for the tape scale.

The scale can be supplied on a reel or cut to a specifi c length.

A stainless steel cover strip can be provided to protect the scale.

Why linear magnetic?

• Selectable resolutions from 50 µm to 1 µm

• High-speed operation

• Excellent dirt immunity to IP68

• High reliability from proven non-contact sensing

technology

• Stick-on reference mark

• Integral set-up LED

• Axis lengths of up to 100 m

• Industry standard digital and analog output

options



C-C

ON, INC.

4-27

Enc

oder

sys

tem

s

The RLE system is a unique, advanced

homodyne laser interferometer system,

specifi cally designed for position feedback

applications.

Simple system architecture reduces

hardware requirements to an RLU laser

unit, one or two RLD10 detector heads

and measurement optics.

Optical confi gurations within the range

of RLD10 detector heads enable

linear, planar (X-Y) and differential

measurements to be performed.

The fully compatible range of user

selectable system components enables a

unique confi guration to match a specifi c

application, and provides sub-nanometer

resolution capability at velocities to 2 m/s

for axis lengths up to 4 m.

The RLU laser unit, containing the

HeNe laser tube, the majority of system

electronics and the fi ber optic launch

mechanism, forms the heart of the RLE

system.

Fiber optic launch capability allows the

laser unit to be mounted remotely from the

measurement axis, thereby eliminating a

potential heat source without increasing

the demands on alignment stability.

Interferometric feedback solutions

Two models of RLU are available – RLU10

and RLU20. Each model is available in

either single or dual axis confi guration,

with the main difference between the

two models being the frequency stability

specifi cation: ±50 ppb (parts per billion)

over one hour for the RLU10 and ±2 ppb

over one hour for the RLU20. The

choice of RLU laser unit determines the

designation of the complete system: a

system incorporating an RLU10 laser

unit is referred to as an RLE10, a system

incorporating an RLU20 laser unit is

referred to as an RLE20 system.

Position output signals from the RLU

are directly available in differential digital

RS422 format and/or 1 Vpp analog sine/

cosine formats. From the digital output,

resolutions to 10 nm are available. The

signal period for the analog output is

158 nm when using a double pass plane

mirror or differential interferometer, and

316 nm for a single pass retrorefl ector

based system. Optionally, an RGE

interpolator or RPI20 parallel interface

can be used in combination with the

analog output to provide resolutions to

0.39 nanometers or 38.6 picometers

respectively.

RLE10 laser system

RLU10 laser user

X-Y stage application

– Anorad – Rockwell

Automation



C-C

ON, INC.

4-28

Enc

oder

sys

tem

s


RLD detector units Most RLD10 detector units contain the fringe

detection scheme, interferometer optic and

integrated laser beam steerer(s). Six different

RLD detector heads are available based on four

variants.

• Single pass interferometer – Uses an external

retrorefl ector target optic for linear applications

with axis lengths up to 4 m. Available with 0°

or 90° beam launch orientation. 316 nm signal

period enables resolutions to 20 nm, or 77.2

picometers when used with the optional RPI20

parallel interface.

• Double pass interferometer – Requires

an external plane mirror target optic for X-Y

applications with axis lengths up to 1 m.

Available with 0° or 90° beam launch orientation.

158 nm signal period enables resolutions to

10 nm, or 38.6 picometers when used with the

optional RPI20 parallel interface.

• No internal interferometer – The absence of

interferometer optics within this head enables

the RLE system to be confi gured with external

optics that allow linear, angle and straightness

measurements to be made. 0° beam launch

orientation only.

• Double pass differential interferometer

(column reference) – Requires external

plane mirror targets for both reference and

measurement arms for X-Y applications with axis

lengths to 1 m. 158 nm signal period enables

resolutions to 10 nm, or 38.6 picometers when

used with the optional RPI20 parallel interface.

As the measurement and reference beam paths

have an element of commonality, this detector

head offers a number of benefi ts.

• Measures stage versus column or workpiece

versus tool for a true differential measurement.

• Removal of errors due to thermal translation

of the interferometer mounting position.

• Minimization of the effects of laser frequency

instability as the differential path length

(between measurement and reference paths)

is reduced.

• Common mode environmental effects enable

the detector head to be mounted outside

the process chamber with minimal effect on

positioning accuracy.

RLD10 single pass interferometer

RLD10 differential interferometer

RLE laser interferometer systems

RLE system benefi ts The unique fi ber optic launch based

architecture provides interferometer system

performance with the ease of use normally

associated with glass or tape scale based

encoder systems.

These architectural advantages are

achieved through a combination of the

following features:

• Fiber optic laser launch – Enables the

laser light to be taken directly to where

the axis position needs to be measured,

eliminating the requirement for remote

beam benders, splitters and associated

mounts.

• Integrated laser beam steerers

– Incorporated in all RLD10 detector

heads to further reduce alignment

complexity.

• Integrated interferometer optics

– Most RLD detector heads include

prealigned interferometer optics and

fringe detection system, making

installation simple: align the RLD10

with the external optic on the moving

element.

• Removal of potential heat error

source – Fiber optic launch enables

the RLU laser head to be mounted in a

location that is insensitive to dissipated

heat without affecting alignment or

stability.

RLD10 double pass interferometer

Reference beam pitch (left) and yaw (right) adjusters

Measurement beam pitch (left) and yaw (right) adjusters

Reference beam pitch (left) and yaw (right) adjusters

Measurement beam pitch (left) and yaw (right) adjusters



C-C

ON, INC.

4-29

Enc

oder

sys

tem

s

RCU10 compensation systemWhen using any laser interferometer

system in a non-vacuum environment,

some form of refractive index compensation

is required to maintain accuracy under

varying environmental conditions. This

is because the fundamental fringe

spacing (unit of count) is a function of the

wavelength of the laser light which varies

fractionally depending on the refractive

index of the air through which it travels.

To counter these refractive index changes,

Renishaw offers the RCU10 real-time

quadrature compensation system, providing

the following features and benefi ts:

• ±1 ppm positioning over a broad range

of environmental conditions

• Simultaneous implementation of

multiple error correction algorithms

• Individual air temperature sensors for

each axis

• RCU10-CS confi guration software

enables the RCU10 system to be

confi gured to match the specifi c

requirements of the application

• One to six axis capability: multi-axis

systems can be formed using a number

of individual RCU10 compensators

connected via a high-speed serial link

RCU10 compensator and sensors

RPI20 parallel interface

RLE system accessories

RPI parallel interfaceRenishaw’s RLE laser interferometer

systems directly produce 1 Vpp sine/

cosine signals with periods of 316 nm

and 158 nm from single and double

pass interferometers respectively. These

sinusoidal signals can be interpolated to

provide ultra-high resolution positional

feedback.

Although sine/cosine interpolation is

available within a number of proprietary

control systems, the analog bandwidth

of these systems is often designed for

tape and glass scale based encoders.

These scale systems produce relatively

coarse signal periods and the sinusoidal

frequencies for any given velocity are

considerably lower than those produced by

an interferometer. This bandwidth limitation

means that laser interferometer feedback

systems can only be used in low velocity

motion applications.

The Renishaw RPI20 parallel interface has

been specifi cally designed to overcome this

limitation by providing ultra-high resolution

parallel format output at high speed. The

RPI20 interpolates by 4096, produces

resolutions of up to 38.6 picometers

and has an analog input bandwidth of

<6.5 MHz, enabling the interferometer

system to be used in applications that have

velocity requirements of up to 1 m/s.

The RCU10 can be used to compensate digital position feedback signals from a variety of sources and can produce compensated output signals in analog or digital format.



C-C

ON, INC.

4-30

Enc

oder

sys

tem

s




C-C

ON, INC.

Styli and accessories

Section 5

Styli Issue 15 Part 1.indd 5-1Styli Issue 15 Part 1.indd 5-1 30/07/2008 10:45:3930/07/2008 10:45:39


C-C

ON, INC.

5-2

Sty

li an

d ac

cess

orie

s


Accuracy at the point of contact

As industry has developed its requirement for increasingly

diverse and complex manufactured parts, inspection systems

have had to work hard to keep up. The use of co-ordinate

measuring machines (CMMs) with probing systems and in-

process inspection on machine tools are two of the solutions

offered by Renishaw to help you maximize your productivity and

maintain the highest quality.

Successful gaging depends very much on the ability of the

probe’s stylus to access a feature and then maintain accuracy

at the point of contact. At Renishaw, we have used our expertise

in probe and stylus design to develop a comprehensive range

of CMM and machine tool styli to offer you the greatest possible

precision.

These notes explain the critical features of every stylus type,

helping you to choose the right design for each inspection need.

What is a stylus?

A stylus is that part of the measuring system which makes

contact with the component, causing the probe’s mechanism to

displace. The generated signal enables a measurement to be

taken. The feature to be inspected dictates the type and size of

stylus used. In all cases, however, maximum rigidity of the stylus

and perfect sphericity of the tip are vital.

To achieve this, Renishaw’s stylus stems are produced on CNC

machine tools to exacting standards. Great care is taken to

ensure that location faces give maximum stiffness whilst stylus

mass is optimized to suit Renishaw’s range of probes.

Genuine Renishaw stylus balls are produced to the highest

standards and are bonded to the stems in such a way as to

ensure maximum joint integrity.

The performance of your gaging can easily be degraded if

you use a stylus with poor ball roundness, poor ball location,

bad thread fi t or a compromised design that allows excessive

bending during measurement. To ensure the integrity of the data

you gather, make certain that you specify and use a stylus from

the comprehensive range of genuine Renishaw styli.

What naming protocol do Renishaw use to describe their styli range?

Renishaw uses the following naming protocol to allow easy

identifi cation of styli by name and part number. The examples

below show how this protocol is assigned and describe the

abbreviations used:

Straight styli

M2 STY D2R L20 EWL14 d1.4SS

The above protocol describes an M2 threaded straight stylus

fi tted with a 2 mm diameter ruby ball. It has an overall length of

20 mm, has an effective working length (EWL) of 14 mm and

has a 1.4 mm diameter stainless steel stem.

Star styli

M2 STR D2R L20 5BALL L19.5 S32

The above protocol describes an M2 threaded star stylus fi tted

with a 2 mm diameter ruby ball. It has fi ve balls on the star and

an overall length of 19.5 mm (from the center of the ball to the

rear of the star mounting face when assembled to a probe). The

span of the star cluster is 32 mm.

Disc styli

M2 DSC SD18 SLVS T2.2 L2.6 BR-Y

The above protocol describes an M2 threaded disc stylus with

a spherical diameter disc of 18 mm. It is made from silver steel

with a disc thickness of 2.2 mm and a length of 2.6 mm. BR

stands for balls/rollers followed by yes (Y) or no (N).

Cylinder styli

M2 CYL D3 SLVS L13 EWL4

The above protocol describes an M2 threaded cylinder stylus

with a critical measuring element diameter of 3 mm made from

silver steel. It has an overall length of 13 mm and an EWL of

4 mm.

Extensions

M4 EXT L15 d7 SS

The above protocol describes an M4 threaded extension with a

length of 15 mm and a diameter of 7 mm. The extension is made

from stainless steel.



C-C

ON, INC.

5-3

Sty

li an

d ac

cess

orie

s

Terminology

Overall length

Renishaw uses a standard description of overall length,

measuring from the rear mounting face of the stylus to the

center of the ball.

Effective working length (EWL)

This is measured from the center of the ball to the point at which

the stem will foul against the feature when measuring ‘normal’ to

the part.

Choosing a stylus

To maintain accuracy at the point of contact, we recommend that

you:

Keep styli short

The more a stylus bends or defl ects, the lower the accuracy.

Probing with the minimum stylus length for your application is

the best option.

Minimize joints

Every time you join styli and extensions, you introduce potential

bending and defl ection points. Try, wherever possible, to keep to

the minimum number of pieces for your application.

Keep the ball as large as possible

There are two reasons for this:

• fi rstly, it maximizes your ball/stem clearance, thereby

reducing the chances for false triggers caused by ‘shanking

out’ on the stylus stem

• secondly, the larger ball reduces the effect of the surface

fi nish of the component being inspected.

The range of genuine Renishaw styli

Ball material

Ruby

The industry standard and the optimum stylus ball material for

a vast majority of measurement applications, ruby is one of the

hardest known materials. Synthetic ruby is 99% pure aluminium

oxide which is grown into crystals (or “boules”) at 2000 °C using

the Verneuil process.

The boules are then cut and gradually machined into a highly

spherical form. Ruby balls are exceptionally smooth on the

surface, have great compressive strength and a high resistance

to mechanical corrosion.

Very few applications exists where ruby is not the preferred

ball material, however there are two applications where balls

manufactured from other materials are recommended.

The fi rst is for heavy-duty scanning applications on aluminum.

Because the materials attract, a phenomenon known as

‘adhesive wear’ can occur, which involves build up of aluminum

from the surface onto the ball. A better ball material for such

applications is silicon nitride.

The second is in heavy-duty scanning applications on cast iron.

Interaction between the two materials can result in ‘abrasive

wear’ of the ruby ball surface. For such applications, zirconia

balls are recommended.

Silicon nitride

Silicon nitride possesses many similar properties to ruby. It is a

very hard and wear-resistant ceramic which can be machined

into very high precision spheres. It can also be polished to an

extremely smooth surface fi nish. Silicon nitride does not have

the attraction to aluminum and so does not exhibit the adhesive

wear seen with ruby in similar applications. However, silicon

nitride does show signifi cant abrasive wear characteristics when

scanning on steel surfaces and so its applications are best

confi ned to aluminum.

Zirconia

Zirconia is a particularly tough ceramic material with hardness

and wear characteristics approaching those of ruby. Its surface

properties make it an ideal material for aggressive scanning

applications on cast iron components.

Stem material

Steel

Stylus stems manufactured from non-magnetic stainless steel

are used widely for styli with ball/tip diameters of 2 mm or

greater and with lengths up to 30 mm. Within this range, one-

piece steel stems offer the optimum stiffness-to-weight ratio,

giving adequate ball/stem clearance without compromising

stiffness with a joint between the stem and threaded body.

A Ball diameter

B Overall length

C Stem diameter

D Effective working length

B

D

C

A



C-C

ON, INC.

5-4

Sty

li an

d ac

cess

orie

s


Tungsten carbide

Tungsten carbide stems are best used for maximizing stiffness

with either small stem diameters required for ball diameters of

1 mm and below, or lengths up to 50 mm. Beyond this, weight

can become a problem and stiffness is lost due to defl ection at

the stem to body joint.

Ceramic

For ball diameters greater than 3 mm, and lengths over 30

mm, ceramic stems offer stiffness comparable to steel but are

signifi cantly lighter than tungsten carbide. Ceramic stemmed styli

can also offer additional crash protection to your probe as the

stem will shatter in a collision.

Carbon fi ber (Renishaw GF)

There are many grades of carbon fi ber materials, however

Renishaw GF combines optimum stiffness characteristics, both

longitudinally and in torsion (important in star constructions),

with extremely low weight. Carbon fi ber is inert and this,

combined with a special resin matrix, provides excellent

protection in the most hostile of machine tool environments.

Renishaw GF is ideal for maximizing stiffness while giving very

low mass for styli above 50 mm in length. It is the optimum stem

material for high-accuracy strain gage technology probes with

excellent vibration-damping characteristics and negligible co-

effi cient of thermal expansion.

The genuine Renishaw stylus range comprises several types:

Straight styli

These are the simplest form of stylus, incorporating highly

spherical industrial ruby balls and a choice of stem material.

Ruby is an extremely hard material and hence stylus wear

is minimized. It is also of low density, keeping tip mass to a

minimum, which avoids unwanted probe triggers caused by

machine motion or vibration.

Mounted on stems made from a range of materials – stainless

steel, tungsten carbide, ceramic and a specialized carbon

fi ber material, “Renishaw GF” – these simple ruby ball styli are

suitable for most inspection applications.

Each stylus has an effective working length (EWL) which is the

penetration that can be achieved by the ball before the stem

fouls against the feature.

The size of the ball and the EWL of the stylus chosen are

dictated by the size of the feature to be inspected. However,

keeping the stylus ball as large as possible and the stem as

short as possible will ensure maximum ball/stem clearance,

whilst providing a greater yet still rigid EWL. Using larger

ruby balls also reduces the effect of the surface fi nish of the

component being inspected.

Probing with very long stylus/extension combinations is not

recommended with standard kinematic touch trigger probes as

the rigidity is reduced and accuracy lost due to stylus bending.

This is not the case with other types of probe such as those with

strain gage technology, as their very low trigger forces permit the

use of long stylus/extension combinations without a signifi cant

loss of accuracy.

Star styli

These stylus clusters provide you with multiple-tip probing of

complex features and bores. Four or fi ve ruby ball systems are

mounted rigidly on a stainless steel center. Three standard sizes

are offered – alternatively, you can create custom-made star styli

using a 5-way stylus center and any of the genuine Renishaw

stylus range.

Star styli can be used to inspect a variety of different features.

Their use can reduce inspection cycle times by allowing multi-

tip probing, minimizing the need to move the probe to extreme

points of internal features such as the sides or grooves in a bore.

Using star styli also allows effective probing in the –Z (upwards)

direction when using a 5-way probe, provided that the stylus tips

extend beyond the diameter of the probe body. Each tip on a star

stylus requires datuming (sometimes referred to as ‘qualifying’

or ‘calibrating’) in the same manner as a single-ball stylus. The

‘span’ of star styli is taken from ball center to ball center.

Disc styli

These styli are used to probe undercuts and grooves within

bores which may be inaccessible to star styli. They are ‘sections’

of highly spherical balls and are available in various diameters

and thicknesses. Full rotational adjustment and the ability to add

a center stylus are features of the Renishaw range of disc styli

that make them particularly fl exible and easy to use.



C-C

ON, INC.

5-5

Sty

li an

d ac

cess

orie

s

Probing with the ‘spherical edge’ of a simple disc is effectively

the same as probing on or about the equator of a large stylus

ball. However, only a small area of this ball surface is available

for contact and hence thinner discs require careful angular

alignment in order to ensure correct contact with the feature

being probed.

A simple disc requires datuming for only one diameter (usually

in a ring gauge), but limits effective probing to only X and Y

directions.

Adding a ‘radius end roller’ allows you to datum and hence probe

in the Z direction, provided that the center of the ‘radius end

roller’ extends beyond the diameter of the probe. The ‘radius end

roller’ can be datumed on a sphere or a slip gage. Rotating and

locking the disc about its center axis allows the ‘radius end roller’

to be positioned to suit the application.

Discs may also have a threaded center to allow the fi xing of

a center stylus, giving the additional fl exibility of probing the

bottom of deep bores (where access for the disc may be limited).

Styli for specialist applications

A range of specialist styli is available to enable probing of

features such as thread form, thin sectioned material, tool

setting and other specialist applications.

Cylinder styli

These are used for probing holes in thin sheet material. In

addition, various threaded features can be probed and the

centers of tapped holes located. Ball-ended cylinder styli allow

full datuming and probing in X, Y and Z directions, thus allowing

surface inspection to be performed.

Pointer and ceramic hollow ball styli

Pointer styli are designed for the inspection of thread forms,

specifi c points and scribed lines (to lower accuracy). The use of

a radius end pointer stylus allows more accurate datuming and

probing of features as detailed above and can also be used to

inspect the location of very small holes.

Ceramic hollow ball styli are ideal for probing deep features and

bores in X, Y and Z directions, with the need to datum only one

ball. There are two versions in the range, 18 mm and 30 mm

diameter, specially designed for the TP2 / TP20 / TP200 and

TP6 probes respectively. Probing with such a large diameter ball

can average out the effects of very rough surfaces.

Tool setting styli

Typically, these are fi tted with a square tip and can have

threaded or plain shaft attachments. The tip faces are ground to

ensure high squareness and parallelism. The TS27R tool setting

probe for machining centers can also be fi tted with a tungsten

carbide disc stylus.

Crash protection devices

Renishaw’s stylus crash protection devices are designed to

break in the event of impact and protect the probe from damage.

Accessories and tools

A wide range of accessories including extensions, 4 and 5-way

centers and stylus knuckles complement the genuine Renishaw

stylus range to achieve fully fl exible inspection.

Stylus centers

These provide maximum probing fl exibility with a single probe.

Taking up to fi ve styli of the same mounting thread, this

accessory allows you to build stylus confi gurations to your own

specifi cation.

Stylus knuckles

These give full adjustment about two axes, allowing the stylus

to be orientated to probe angled features. This adjustment is

especially useful when the probe cannot be correctly orientated

by the probe head, or when access for the head is limited.



C-C

ON, INC.

5-6

Sty

li an

d ac

cess

orie

s


Stylus extensions

These provide additional probing penetration by extending the

stylus away from the probe. However, using stylus extensions

can reduce probe accuracy due to loss of rigidity. This is not the

case with electronic probes, whose extremely low trigger forces

render them less sensitive to this type of inaccuracy.

Stylus thread adaptors

These allow M2, M3, M4 and M5 threaded styli to be

interchanged on the majority of touch trigger probes. They are

particularly useful for adapting the extensive range of specialized

application M2 styli for use on larger probes.

Stylus tools

Specifi cally designed for mounting styli correctly onto probes

and for the construction of specialized stylus combinations,

Renishaw’s stylus tools protect your investment.

S7 stylus tool

The S7 stylus tool is used for tightening styli and accessories

when connecting to one another or directly into the probe. It

is specifi cally designed to yield if excessive tightening force is

applied, avoiding damage to the threads of stylus and probe.

Stylus crank

A stylus crank can allow access to features that are otherwise

diffi cult to reach, and are often used in lathe inspection

applications.

Renishaw stylus kits

Renishaw styli and accessories are available in a wide selection

of kits, ranging from a small precision set of the most frequently

used styli, to a comprehensive set to meet virtually every

inspection need.

Some sets are housed in a quality wooden case for maximum

protection and superb presentation. The styli are held in a wood

insert, individually located in a nylon sleeve providing protection

for the mounting threads. This type of box features a removable

module which houses up to twelve ruby ball styli and contains

a tray for discs, tools and accessories. This allows the stylus

selection for a particular inspection task to be brought to the

CMM’s table. The sloping lid design of this kit provides easy

access to styli, minimizing handling of ruby balls and contact

surfaces, thus aiding cleanliness.

Probing kits are also available to include a probe, probe head,

extension bars and styli.

Custom design service

If you cannot achieve your objectives using our extensive range

of standard products, Renishaw’s Styli and Custom Products

Division offers a unique service by providing customers with a

total solution for their probing needs for CMM, machine tool or

scanning applications.

The Division includes expertise in applications, design,

engineering and manufacturing with extensive experience in

providing tailor-made product solutions to specifi c customer’s

requirements.

In many application problems, the solution lies in the choice of

the stylus which infl uences access of the workpiece features,

inspection times and probe performance. All of these aspects

are considered within the design of a custom stylus, ensuring

that the solution incorporates the ideal choice of materials and

optimizes probe performance for your particular application.

Renishaw’s Styli and Custom Products Division has supplied

over 5,000 different custom styli into probing applications

worldwide, so the solution to your application problem may

already exist.

For advice and further details, please contact your nearest

Renishaw distributor.

Always use genuine Renishaw styli or your probe performance

will be compromised!



C-C

ON, INC.

5-7

Sty

li an

d ac

cess

orie

s

Part number A-5000-3603 A-5000-7804 A-5000-4160 A-5000-4161A Ball dia. mm (inch) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16)B Length mm (inch) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79)C Stem dia. mm (in.) 1.4 (0.06) 1.4 (0.06) 1.5 (0.06) 1.5 (0.06)D EWL* mm (inch) 14.0 (0.56) 16.5 (0.65) 17.0 (0.67) 20.0 (0.79)

Mass grammes 0.4 0.4 0.5 0.6 Price $25 $25 $25 $25

20 mm range

M2 threaded stylus rangeRuby ball styli (stainless steel stems)

10 mm range

Part number A-5000-7806 A-5000-7802 A-5000-7807 A-5000-7803 A-5000-3604 A-5000-4154 A-5000-4155 A-5000-4156 A-5000-4158A Ball dia. mm (inch) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24) 8.0 (0.32)B Length mm (inch) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 11.0 (0.44)C Stem dia. mm (in.) 0.7 (0.03) 0.7 (0.03) 1.0 (0.04) 1.0 (0.04) 1.5 (0.06) 1.5 (0.06) 2.5 (0.10) 2.5 (0.10) 2.5 (0.10)D EWL* mm (inch) 4.5 (0.18) 4.5 (0.18) 6.0 (0.24) 6.5 (0.26) 7.0 (0.28) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 11.0 (0.44) Mass grammes 0.3 0.3 0.3 0.3 0.4 0.4 0.7 0.9 1.5 Price $32 $22 $22 $22 $22 $22 $36 $39 $72

Part number A-5000-7800 A-5000-7805 A-5000-7801 A-5003-1325A Ball dia. mm (inch) 0.3 (0.012) 0.5 (0.02) 0.7 (0.03) 1.0 (0.04)B Length mm (inch) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40)C Stem dia. mm (in.) 0.2 (0.01) 0.4 (0.02) 0.5 (0.02) 0.7 (0.03)

D EWL* mm (inch) 2.0 (0.08) 3.0 (0.12) 4.0 (0.16) 4.0 (0.16) Mass grammes 0.3 0.3 0.3 0.3 Price $111 $90 $84 $77

10 mm range

Ruby ball styli (tungsten carbide stems)

Part number A-5003-1345 A-5003-0577 A-5000-7808 A-5003-0033 A-5003-0034A Ball dia. mm (inch) 0.5 (0.02) 0.7 (0.03) 1.0 (0.04) 1.0 (0.04) 1.5 (0.06)B Length mm (inch) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79)C Stem dia. mm (in.) 0.3 (0.012) 0.5 (0.02) 0.7 (0.03) 0.8 (0.04) 1.0 (0.04)D EWL* mm (inch) 7.0 (0.28) 12.0 (0.48) 7.0 (0.28) 12.5 (0.50) 12.5 (0.50) Mass grammes 0.48 0.32 0.50 0.41 0.50 Price $105 $107 $49 $55 $55

20 mm range

B

A

D

C

* Effective working length



C-C

ON, INC.

5-8

Sty

li an

d ac

cess

orie

s

Ruby ball styli (tungsten carbide stems) – continued

20 mm range

Part number A-5000-8663 A-5003-0035 A-5003-0036 A-5003-0038 A-5003-0040 A-5003-0043 A-5003-0047

A Ball dia. mm (inch) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20)B Length mm (inch) 27.5 (1.08) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19)C Stem dia. mm (in.) 0.7 (0.03) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10)D EWL* mm (inch) 20.5 (0.81) 22.5 (0.89) 22.5 (0.89) 22.5 (0.89) 27.0 (1.06) 30.0 (1.19) 30.0 (1.19) Mass grammes 0.40 0.58 0.99 1.48 1.49 1.57 2.57 Price $84 $38 $44 $44 $44 $44 $49

30 mm range

Part number A-5003-4177 A-5003-1370 A-5003-4779 A-5003-4780A Ball dia. mm (in) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24)B Length mm (in) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19)C Stem dia mm (in) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10) 2.5 (0.10)D EWL* mm (in) 27.0 (1.06) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) Mass grammes 0.44 0.68 0.93 1.11 Price $84 $45** $86 $92

30 mm range

Ruby ball styli (ceramic stems) A-5003-3584 A-5003-3877 A-5003-4241 A-5003-4781 A-5003-4782 3.0 (0.12) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24) 30.0 (1.19) 40.0 (1.58) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08) 3.0 (0.12) 3.0 (0.12) 27.0 (1.06) 36.0 (1.42) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 0.40 0.50 0.57 0.79 0.96 $100** $100** $100** $104 $109

30 mm – 40 mm range

Ruby ball styli (carbon fi ber stems)

M2 styli


* Effective working length ** Special



C-C

ON, INC.

5-9

Sty

li an

d ac

cess

orie

s

Part number A-5003-0037 A-5003-0039 A-5003-0041 A-5003-0044 A-5003-0048 A-5003-0042 A-5003-0045 A-5003-0049A Ball dia. mm (inch) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20)B Length mm (inch) 40.0 (1.58) 40.0 (1.58) 40.0 (1.58) 40.0 (1.58) 40.0 (1.58) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97)C Stem dia. mm (in.) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10)D EWL* mm (inch) 32.5 (1.28) 32.5 (1.28) 37.0 (1.46) 40.0 (1.58) 40.0 (1.58) 47.0 (1.85) 50.0 (1.97) 50.0 (1.97) Mass grammes 1.29 1.95 1.97 2.04 3.17 2.44 2.52 3.75 Price $49 $49 $49 $49 $53 $44 $49 $53

40 mm range


50 mm range

Part number A-5003-0064 A-5003-0065 A-5003-0066 A-5003-0470A Ball dia. mm (in) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24)B Length mm (in) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97)C Stem dia. mm (in) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10) 2.5 (0.10)D EWL* mm (in) 47.0 (1.85) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) Mass grammes 0.83 0.91 1.31 1.49 Price $70 $70 $90 $86

50 mm range

Ruby ball styli (ceramic stems) A-5003-2285 A-5003-2286 A-5003-2287 4.0 (0.16) 5.0 (0.20) 6.0 (0.24) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 1.0 1.1 1.2 $105 $110 $115


B

A

D

C




C-C

ON, INC.

5-10

Sty

li an

d ac

cess

orie

s

Part number A-5003-4784 A-5003-4785 A-5003-4786A Ball dia. mm (inch) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24)B Length mm (inch) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96)C Stem dia. mm (in.) 2.0 (0.08) 3.0 (0.12) 3.0 (0.12)D EWL* mm (inch) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96)

Mass grammes 1.15 1.27 1.45 Price $135 $144 $152

75 mm range

Ruby ball styli (carbon fi ber stems) A-5003-2289 A-5003-2290 A-5003-2291 4.0 (0.16) 5.0 (0.20) 6.0 (0.24) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 1.50 1.59 1.78 $154 $163 $172

100 mm range

Part number A-5003-4011 A-5000-7811 A-5003-4787 A-5003-4788 A-5000-7629 A-5000-3626Span mm (inch) 10.0 (0.40) 10.0 (0.40) 20.0 (0.79) 20.0 (0.79) 18.0 (0.71) 30.0 (1.19)Ball mm (inch) 0.5 (0.02) 1.0 (0.04) 0.5 (0.02) 1.0 (0.04) 2.0 (0.08) 2.0 (0.08)Stem dia. mm (inch) 0.3 (0.012) 0.7 (0.03) 0.3 (0.012) 0.7 (0.03) 1.4 (0.06) 1.4 (0.06)EWL* mm (inch) N/A N/A N/A N/A 12.0 (0.48) 12.0 (0.48)Mass grammes 0.7 0.5 0.7 0.9 1.3 1.8Price $249 $138 $211 $221 $139 $133

Star styli (fi xed)

B

A

D

C


M2 styli



C-C

ON, INC.

5-11

Sty

li an

d ac

cess

orie

s

Part number M-5000-4152 M-5000-4153 A-5000-8876 A-5000-8877 A-5000-7812 A-5003-0073 Silver steel Silver steel Ruby Ruby Ruby RubyCylinder dia. mm (inch) 1.5 (0.06) 3.0 (0.12) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 4.0 (0.16)Overall length mm (inch) 10.75 (0.42) 12.75 (0.50) 15.0 (0.60) 15.0 (0.60) 21.2 (0.83) 22.0 (0.87)Stem dia. mm (inch) 1.0 (0.04) 1.5 (0.06) NA NA 1.6 (0.07) 2.0 (0.08)EWL* mm (inch) 1.25 (0.05) 3.8 (0.15) 8.0 (0.32) 8.0 (0.32) 7.2 (0.29) 10.0 (0.40)Mass grammes 0.3 0.6 0.3 0.3 0.5 0.9Price $20 $20 $185 $270 $108 $130

Part number A-5003-4789 A-5003-4790 A-5003-4791 A-5000-3609Ball mm (inch) 1.0 (0.04) 0.5 (0.02) 1.0 (0.04) 2.0 (0.08)Stem dia. mm (inch) 0.7 (0.03) 0.4 (0.02) 0.7 (0.03) 1.4 (0.06)EWL* mm (inch) 3.5 (0.14) 7.0 (0.28) 11.0 (0.44) 12.0 (0.48)Mass grammes 0.31 0.43 0.45 0.44Price $125 $163 $125 $71

Star stylus centers

Disc styliPart number A-5000-3611 A-5000-4187 A-5000-7809 A-5000-3613 A-5000-7810 Ruby Silver steel Silver steel Silver steel Silver steelDisc dia. mm (inch) 6.0 (0.24) 25.0 (0.99) 18.0 (0.71) 18.0 (0.71) 25.0 (0.99)Disc depth mm (inch) 1.2 (0.05) 3.0 (0.12) 1.5 (0.06) 2.2 (0.09) 1.5 (0.06)Roller depth mm (inch) 2.0 (0.08) NA 2.5 (0.10) 3.0 (0.12) 2.5 (0.10)Stem dia. mm (inch) 2.0 (0.08) NA 4.2 (0.17) NA 4.2 (0.17)Mass grammes 0.6 3.8 3.0 2.7 4.0Price $70 $99 $89 $105 $89

Cylinder styli




C-C

ON, INC.

5-12

Sty

li an

d ac

cess

orie

s

Part number A-5003-1208 A-5003-1210 A-5003-1218 A-5003-1219 A-5003-1228 A-5003-3545 A-5003-0074 A-5003-1258Cylinder dia. mm (inch) 0.3 (0.012) 0.5 (0.02) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08) 3.0 (0.12)Overall length mm (inch) 10.2 (0.41) 15.3 (0.61) 35.5 (1.40) 15.8 (0.63) 16.0 (0.63) 40.0 (1.58) 40.0 (1.58) 22.5 (0.89)

Stem dia. mm (inch) NA NA NA NA NA 1.9 (0.07) NA NAEWL* mm (inch) 2.7 (0.11) 7.8 (0.31) 28.0 (1.10) 8.3 (0.33) 8.5 (0.34) 7.0 (0.26) 32.0 (1.26) 22.5 (0.89)Mass grammes 0.3 0.3 0.7 0.6 0.8 0.7 2.0 2.0Price $220 $190 $160 $85 $85 $160** $87 $155

Parallel hemispherical-ended styli (tungsten carbide)

Part number M-5000-7634 M-5000-3647 M-5000-3648 M-5000-4162 M-5000-7779Length mm (inch) 5.0 (0.20) 10.0 (0.40) 20.0 (0.79) 30.0 (1.19) 40.0 (1.58)Stem dia. mm (inch) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12)Mass grammes 0.2 0.4 0.9 1.4 1.8Price $11 $13 $13 $13 $18

Stylus extensions (stainless steel)

Stylus extensions (ceramic) Part number A-5003-0070 A-5003-0071 A-5003-0072Length mm (inch) 30.0 (1.19) 40.0 (1.58) 50.0 (1.97)Stem dia. mm (inch) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12)Mass grammes 0.97 1.22 1.51Price $58 $58 $60

** Special * Effective working length

M2 styli



C-C

ON, INC.

5-13

Sty

li an

d ac

cess

orie

s

Part number M-5000-4150 A-5000-7813 A-5000-3614 Silver steel Tungsten carbide Ceramic

Length mm (inch) 15.0 (0.60) 10.0 (0.40) 11.0 (0.44)Ball dia. mm (inch) NA NA 18.0 (0.71)Mass grammes 0.7 0.7 3.3Price $25 $67 $279

Special purpose styli

Stylus extensions (carbon fi ber)

Part number A-5003-2280 A-5003-2281 A-5003-2282 A-5003-2283Length mm (inch) 40.0 (1.58) 50.0 (1.97) 70.0 (2.76) 90.0 (3.55)Stem dia. mm (inch) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12)Outer dia. mm (inch) 3.5 (0.14) 3.5 (0.14) 3.5 (0.14) 3.5 (0.14)Mass grammes 0.9 1.0 1.3 1.5Price $97 $101 $105 $110



C-C

ON, INC.

5-14

Sty

li an

d ac

cess

orie

s

M3 threaded stylus range


21 mm range

Ruby ball styli (stainless steel stems)

A-5000-3554 A-5000-7648 4.0 (0.16) 5.0 (0.20) 31.0 (1.23) 31.0 (1.23) 2.5 (0.10) 3.5 (0.14) 27.0 (1.07) 31.0 (1.23) 2.5 3.0 $32 $32

31 mm range

Part number A-5000-7632 A-5003-0050 A-5003-0054

A Ball dia. mm (inch) 0.5 (0.02) 1.5 (0.06) 2.5 (0.10)B Length mm (inch) 21.0 (0.83) 20.0 (0.79) 20.2 (0.80)C Stem dia. mm (in.) 0.4 (0.02) 1.0 (0.04) 2.0 (0.08)D EWL* mm (inch) 2.0 (0.08) 12.5 (0.50) 12.5 (0.50) Mass grammes 1.0 0.8 1.3 Price $98 $44 $44

21 mm range


A-5003-0051 A-5003-0052 A-5003-0055 A-5003-0057 1.5 (0.06) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 22.5 (0.89) 22.8 (0.90) 22.5 (0.89) 24.0 (0.94) 0.93 1.32 1.81 1.83 $49 $44 $44 $44

30 mm range

These styli are also available with specialist ball materials – see pages 5-46 to 5-49

M3 styli




C-C

ON, INC.

5-15

Sty

li an

d ac

cess

orie

s


40 mm range


Part number A-5003-0059 A-5003-0061 A-5003-0063A Ball dia. mm (inch) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20)B Length mm (inch) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97)C Stem dia. mm (in.) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10)D EWL* mm (inch) 43.7 (1.72) 46.0 (1.82) 50.0 (1.97) Mass grammes 2.78 2.85 4.10 Price $53 $53 $53

50 mm range



50 mm range

Ruby ball styli (ceramic stems)

B

A

D

C




C-C

ON, INC.

5-16

Sty

li an

d ac

cess

orie

s

Part number A-5003-4860 A-5003-4862A Ball dia. mm (inch) 6.0 (0.24) 8.0 (0.32)B Length mm (inch) 75.0 (2.96) 75.0 (2.96)C Stem dia. mm (in.) 4.0 (0.16) 4.0 (0.16)D EWL* mm (inch) 75.0 (2.96) 75.0 (2.96) Mass grammes 2.40 2.98 Price $158 $180

75 mm range


A-5003-4861 A-5003-4863 6.0 (0.24) 8.0 (0.32) 100.0 (3.94) 100.0 (3.94) 4.0 (0.16) 4.0 (0.16) 100.0 (3.94) 100.0 (3.94) 2.89 3.47 $168 $190

100 mm range


M3 styli




C-C

ON, INC.

5-17

Sty

li an

d ac

cess

orie

s

Ruby ball styli (carbon fi ber stems) Part number A-5003-7057 A-5003-7056 A-5003-7055 A-5003-7054 A-5003-7445 A-5003-7446 A-5003-7447A Ball dia. mm (inch) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 12.0 (0.48) 12.0 (0.48) 12.0 (0.48)B Length mm (inch) 75.0 (2.96) 100.0 (3.94) 150.0 (5.91) 200.0 (7.88) 100.0 (3.94) 150.0 (5.91) 200.0 (7.88)C Stem dia. mm (in.) 4.0 (0.16) 4.0 (0.16) 4.0 (0.16) 4.0 (0.16) 4.0 (0.16) 4.0 (0.16) 4.0 (0.16)D EWL* mm (inch) 75.0 (2.96) 100.0 (3.94) 150.0 (5.91) 200.0 (7.88) 100.0 (3.94) 150.0 (5.91) 200.0 (7.88) Mass grammes 4.05 4.53 5.49 6.47 5.9 6.9 7.9 Price $275 $275 $301 $301 $275 $301 $301

B

A

D

C




C-C

ON, INC.

5-18

Sty

li an

d ac

cess

orie

s

M3 styli

Part number M-5000-7633 M-5000-3592 M-5000-3593Length mm (inch) 10.0 (0.40) 20.0 (0.79) 35.0 (1.38)Stem dia. mm (inch) 4.0 (0.16) 4.0 (0.16) 4.0 (0.16)Mass grammes 0.9 1.6 2.9Price $12 $12 $12

Stylus extensions (stainless steel)

Part number A-5003-4864 A-5003-4865Length mm (inch) 75.0 (2.96) 100.0 (3.94)Stem dia. mm (inch) 4.0 (0.16) 4.0 (0.16)Mass grammes 2.53 3.02Price $102 $110

Stylus extensions (carbon fi ber)

Part number A-5003-0075Length mm (inch) 50.0 (1.97)Stem dia. mm (inch) 4.0 (0.16)Mass grammes 2.95Price $58

Stylus extensions (ceramic)

Part number A-5003-0076 A-5003-0077Span mm (inch) 30.0 (1.19) 50.0 (1.97)Ball mm (inch) 2.0 (0.08) 2.0 (0.08)Stem dia. mm (inch) 1.4 (0.06) 1.4 (0.06)EWL* mm (inch) 11.0 (0.44) 11.0 (0.44)Mass grammes 2.38 5.25Price $140 $140

Star styli (fi xed)




C-C

ON, INC.

5-19

Sty

li an

d ac

cess

orie

s

Disc and hollow ball styli

Part number A-5000-3615 A-5000-7612 A-5000-7669 Silver steel Silver steel Carbon steelDisc dia. mm (inch) 12.7 (0.50) 35.0 (1.38) 63.5 (2.51)Disc depth mm (inch) 2.2 (0.09) 5.0 (0.20) 6.0 (0.24)Stem dia. mm (inch) 3.5 (0.14) NA NAMass grammes 4.0 10.0 45.0Price $74 $126 $134

Part number A-5000-7814 A-5003-7098 Ceramic CeramicDisc dia. mm (inch) 30.0 (1.19) 30.0 (1.19)Disc depth mm (inch) 17.0 (0.67) 1.5 (0.06)Stem dia. mm (inch) NA 4.0 (0.16)Mass grammes 13.0 3.6Price $343 $289**

** Special



C-C

ON, INC.

5-20

Sty

li an

d ac

cess

orie

s


Ruby ball styli (stainless steel stems)




Part number A-5003-4792 A-5003-2932 A-5003-4793 A-5003-4794 A-5003-4795 A-5003-4796A Ball dia. mm (inch) 1.0 (0.04) 2.0 (0.08) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24)B Length mm (inch) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79)C Stem dia. mm (in.) 0.7 (0.03) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10) 2.5 (0.10)D EWL* mm (inch) 10.0 (0.40) 10.0 (0.40) 8.5 (0.33) 8.5 (0.33) 7.9 (0.31) 10.7 (0.42) Mass grammes 2.39 3.01 3.53 3.53 4.52 4.66 Price $77 $86 $86 $86 $92 $92

20 mm range




M4 styli



C-C

ON, INC.

5-21

Sty

li an

d ac

cess

orie

s

Part number A-5003-0233 A-5000-7521 A-5003-0235 A-5003-1436 A-5000-3709 A-5000-7795 Ceramic Stainless steel Ceramic Carbon fi ber Ceramic Ceramic (MP700 only)

A Ball dia. mm (inch) 4.0 (0.16) 5.0 (0.20) 5.0 (0.20) 6.0 (0.24) 6.0 (0.24) 8.0 (0.32)

B Length mm (inch) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97)

C Stem dia. mm (in.) 3.0 (0.12) 4.5 (0.18) 3.8 (0.15) 4.4 (0.18) 4.5 (0.18) 4.5 (0.18)D EWL* mm (inch) 33.5 (1.32) 35.0 (1.38) 33.5 (1.32) 38.5 (1.52) 38.5 (1.52) 50.0 (1.97)

Mass grammes 3.9 5.8 5.0 4.1 4.8 5.4 Price $70 $70 $82 $128 $97 $108

Ruby ball styli

50 mm range


(Tungsten carbide stems)

50 mm range

A-5003-0236 A-5003-2764 A-5003-4802 5.0 (0.20) 6.0 (0.24) 8.0 (0.32) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96) 3.8 (0.15) 4.5 (0.18) 4.5 (0.18) 58.5 (2.30) 63.5 (2.51) 75.0 (2.96) 5.63 5.64 6.20 $86 $103 $115

75 mm range

(Ceramic stems)

B

A

D

C* Effective working length



C-C

ON, INC.

5-22

Sty

li an

d ac

cess

orie

s

Ruby ball styli


Part number A-5000-7522 A-5000-9761 A-5000-7523 A-5000-3712 A-5000-8156 A-5003-1358 A-5000-7796 A-5003-1255 A-5003-1075 Stainless steel Ceramic Stainless steel Ceramic Ceramic Carbon fi ber Ceramic Carbon fi ber Carbon fi ber (MP700 only) (MP700 only) (MP700 only)A Ball dia. mm (in) 5.0 (0.20) 5.0 (0.20) 5.0 (0.20) 6.0 (0.24) 6.0 (0.24) 6.0 (0.24) 8.0 (0.32) 6.0 (0.24) 6.0 (0.24)B Length mm (in) 100.0 (3.94) 100.0 (3.94) 150.0 (5.91) 100.0 (3.94) 150.0 (5.91) 100.0 (3.94) 100.0 (3.94) 150.0 (5.91) 200.0 (7.88)C Stem dia mm (in) 4.5 (0.18) 3.8 (0.15) 4.4 (0.17) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)D EWL* mm (in) 85.0 (3.35) 83.5 (3.29) 135.00 (5.31) 88.5 (3.48) 135.0 (5.31) 88.5 (3.48) 100.0 (3.94) 138.5 (5.46) 188.5 (7.42) Mass grammes 11.3 6.4 17.4 6.4 7.9 6.2 7.5 7.5 8.7 Price $79 $150 $88 $109 $170 $145 $135 $274 $289



M4 styli



C-C

ON, INC.

5-23

Sty

li an

d ac

cess

orie

s

Ruby ball styliPart number A-5003-7306 A-5003-6510 A-5003-6511 A-5003-6512 A-5003-4179 Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi berA Ball dia. mm (in) 6.0 (0.24) 6.0 (0.24) 6.0 (0.24) 6.0 (0.24) 6.0 (0.24)B Length mm (in) 50.0 (1.97) 100.0 (3.94) 150.0 (5.91) 200.0 (7.88) 300.0 (11.82)C Stem dia mm (in) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)D EWL* mm (in) 38.5 (1.52) 88.5 (3.48) 138.5 (5.45) 188.5 (7.42) 288.5 (11.37) Mass grammes 4.1 6.2 7.5 8.7 10.4 Price $128 $145 $274 $289 $425


B

A

D

C

Can be used on all M4 probes except MP700



C-C

ON, INC.

5-24

Sty

li an

d ac

cess

orie

s

Part number A-5000-6462 A-5000-7098 Ceramic CeramicBall mm (inch) 6.0 (0.24) 6.0 (0.24)Length mm (inch) 100.0 (3.94) 50.0 (1.97)Stem dia. mm (in.) 4.5 (0.18) 4.5 (0.18)EWL* mm (inch) 88.5 (3.48) 38.5 (1.52)Mass grammes 7.5 6.0Price $94 $89

Star styli Disc styli

Part number A-5000-7596 A-5000-7597 A-5000-7598Diameter A mm (inch) Ø30.0 (1.19) Ø35.0 (1.38) Ø50.0 (1.97)Diameter B mm (inch) Ø21.0 (0.83) Ø21.0 (0.83) Ø23.0 (0.91)C mm (inch) 2.2 (0.09) 2.2 (0.09) 3.0 (0.12)D mm (inch) 3.0 (0.12) 3.0 (0.12) 4.0 (0.16)Mass grammes 8.01 9.57 13.55Price $114 $109 $119

10.0 (0.40)

DIA A

Ø 17.3 17.1 (0.69) (0.68)

4.1(0.17)

10.0 (0.40)

DIA B

Swivel adaptor

Part number M-5000-7591 M-5000-7592Length A mm (inch) 10.0 (0.40) 13.5 (0.54)Length B mm (inch) 12.5 (0.50) 16.0 (0.63)Mass grammes 2.76 3.70Price $50 $50

Swivel adaptor M4

A

5.0 Swivel adaptor

ScrewM-5000-7588

ScrewM-5000-7588

Stylus

B

Stylus crank

Part number M-5000-7589 M-5000-7590Length A mm (in) 21.9 (0.86) 27.6 (1.09)Mass grammes 6.07 6.94Price $57 $57

ScrewM-5000-7588

Stylus crank

Stylus

5.0 (0.20)

M4

15.0 (0.59)

15.0

(0.

59)

7.5

(0.2

9)

M-5000-6460Star centerMass 10 g

Price: $100

A

M4 styli

D

C




C-C

ON, INC.

5-25

Sty

li an

d ac

cess

orie

s

Crash protection devices

Part number M-5000-7582 M-5000-7587 M-5000-7588 M-2085-0069 A-5003-0661 M-2197-0156 M-2197-0150 Stainless steel Stainless steel Stainless steel Silver steel Silver steel Silver steel Silver steelLength mm (inch) 8.0 (0.32) 8.0 (0.32) 10.0 (0.40) 12.0 (0.48) 15.2 (0.60) 9.0 (0.36) 16.0 (0.63)Mass grammes 1.8 1.4 1.5 2.7 4.6 1.5 2.1Price $5 $5 $5 $25 $25 $25 $25For use on LP2 LP2 LP2 MP10 TS27R HPMA HPMA MP12 HPRA HPRA MP700 HPPA HPPA MP18 MP16 MP3 MP11

Part number M-2008-0333 M-2008-0604 M-2008-0605 M-2048-2093 M-2116-0127 Silver steel Silver steel Silver steel Silver steel Silver steelLength mm (inch) 13.3 (0.52) 22.3 (0.88) 30.3 (1.19) 13.5 (0.53) 19.0 (0.75)Mass grammes 2.43 3.6 4.5 1.37 2.2Price $25 $25 $25 $25 $25For use on TS20 TS20 TS20 RP1/RP2 TSA

Use P-TL09-0003

to tighten



C-C

ON, INC.

5-26

Sty

li an

d ac

cess

orie

s

Tool datuming styli

Part number A-5000-3212 A-5000-6701 A-5000-6713 A-5000-6403

Overall length mm (inch) 53.0 (2.09) 43.0 (1.70) 96.5 (3.80) 32.5 (1.28)Stem dia. mm (inch) 4.5 (0.18) 4.5 (0.18) 7.5 (0.30) 5.4 (0.22)Mass grammes 4.5 4.3 21.9 11.0Price $107 $107 $128 $107

6.0(0.24)

6.0(0.24)

6.0(0.24)

6.0(0.24)

6.0(0.24)

6.0(0.24)

5.0(0.20)

10.0(0.40)

10.0 (0.40)

9.3(0.37)

9.3(0.37)

3.0(0.12)

TS27R styli – parallel shafted (not M4) – not compatible with TS27 probes

Part number A-2008-0382 A-2008-0384 Tungsten carbide CeramicOverall length mm (inch) 23.0 (0.91) 22.0 (0.87)Mass grammes 12.1 7.1Price $111 $130

Stylus conversion kit for TS27R to allow horizontal machining ap-plications ( A-2008-0448)

Price: $120

Stylus holder assembly A-2008-0389Price: $25

Stylus holder M-2008-0447*Price: $95

InlineM-2008-0429

Vertical machining applications Horizontal machining applications

* Order also requires 3 x P-SC13-0403

8.0(0.32)

8.0(0.32)

Ø12.7 (0.50) 19.0 A/F (0.75)

19.0

A/F

(0.

75)

3.925(0.15)

3.925(0.15)

M4 styli



C-C

ON, INC.

5-27

Sty

li an

d ac

cess

orie

s

Tool datuming styli

Part number A-2197-0157 A-2197-0158 A-2197-0159 A-2197-0160 A-2197-0161 A-2197-0162 Tungsten steel Tungsten steel Tungsten steel Tungsten steel Tungsten steel Tungsten steelLength mm (inch) 14.2 (0.56) 19.5 (0.77) 29.5 (1.16) 34.5 (1.36) 39.5 (1.55) 49.5 (1.95)Mass grammes 14.86 16.0 18.3 19.6 20.17 20.9Price $116 $116 $116 $116 $116 $116For use on HPPA HPPA HPPA HPPA HPPA HPPA HPMA HPMA HPMA HPMA HPMA HPMA HPRA HPRA HPRA HPRA HPRA HPRA

Length

Part number A-2008-0601 A-2008-0602 A-2008-0603 A-2048-2050 A-2048-2051 A-2116-0140 A-2116-0141 Tungsten steel Tungsten steel Tungsten steel Tungsten steel Tungsten steel Tungsten steel Tungsten steelLength mm (inch) 15.4 (0.61) 24.0 (0.96) 32.4 (1.27) 23.2 (0.91) 32.0 (1.26) 32.0 (1.26) 42.0 (1.65)

Mass grammes 9.1 8.0 8.95 18.14 20.64 13.56 16.05

Price $116 $116 $116 $137 $137 $109 $127For use on TS20 TS20 TS20 HPA (M6 MTG) HPA (M6 MTG) TSA TSA

Part number A-2116-0142Length mm (inch) 30.3 (0.40)Mass grammes 1.5Price $158For use on TSA



C-C

ON, INC.

5-28

Sty

li an

d ac

cess

orie

s

Part number M-5000-7583 M-5000-7584 M-5000-7585 M-5000-7586 A-5000-7754 A-5000-7755 A-5000-7727 A-5003-0587 Stainless steel Stainless steel Stainless steel Stainless steel Ceramic Ceramic Ceramic CeramicLength mm (inch) 10.0 (0.40) 15.0 (0.60) 20.0 (0.79) 30.0 (1.19) 30.0 (1.19) 50.0 (1.97) 100.0 (3.94) 200.0 (7.87)Stem dia. mm (in.) 7.0 (0.28) 7.0 (0.28) 7.0 (0.28) 7.0 (0.28) 7.4 (0.30) 7.4 (0.30) 7.4 (0.30) 7.4 (0.29)Mass grammes 2.4 3.7 4.8 7.4 5.1 6.7 10.6 18.4 (0.72)Price $36 $36 $36 $36 $51 $60 $154 $165

Stylus extensions

M4 styli



C-C

ON, INC.

5-29

Sty

li an

d ac

cess

orie

s

Part number A-5000-7723 A-5000-7724 A-5000-7725Ball diameter mm (inch) 25.0 (0.99) 32.0 (1.26) 38.0 (1.50)Length mm (inch) 12.5 (0.50) 9.5 (0.38) 9.5 (0.38)Mass grammes 18.7 19.6 28.5Price $91 $101 $104

Hemispherical anodized aluminum ball styli (imperial)

Part number A-5000-7710 A-5000-7711 A-5000-7712 A-5000-7713 A-5000-7714 A-5000-7715Ball dia. mm (inch) 5/16 (8.0) 3/8 (9.6) 1/2 (12.7) 5/8 (15.9) 3/4 (19.1) 1 (25.4)Length mm (inch) 10.5 (0.42) 10.5 (0.42) 10.5 (0.42) 11.5 (0.46) 11.5 (0.46) 12.5 (0.50)Mass grammes 3.4 3.8 4.9 7.1 9.9 19.6Price $85 $85 $87 $89 $90 $91

Complete stylus kit available – Part number A-5000-7677 – Price $864

Hemispherical anodized aluminum ball styli (metric)

Part number A-5000-7718 A-5000-7719 A-5000-7720 A-5000-7721 A-5000-7722Ball dia. mm (inch) 8.0 (0.32) 10.0 (0.40) 12.0 (0.48) 16.0 (0.63) 20.0 (0.79)Length mm (inch) 10.5 (0.42) 10.5 (0.42) 10.5 (0.42) 11.5 (0.46) 11.5 (0.46)Mass grammes 3.4 3.9 4.6 7.2 10.9Price $85 $85 $87 $89 $90

Digitizing styli

Complete stylus kit available – Part number A-5000-7676 – Price $864



C-C

ON, INC.

5-30

Sty

li an

d ac

cess

orie

s

B

A

D

C

M4 styli


Tungsten carbide styli (stainless steel stems) for CP1 probes




C-C

ON, INC.

5-31

Sty

li an

d ac

cess

orie

s

Ruby micro ball styli (tungsten carbide stems)


20 mm range

A-5003-5211 A-5003-5212 A-5003-5213 0.3 (0.012) 0.5 (0.02) 0.7 (0.03) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 0.2 (0.01) 0.4 (0.02) 0.5 (0.02) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 8.95 8.95 8.98 $96 $86 $86


50 mm range

A-5003-5240 A-5003-5241 A-5003-5242 0.3 (0.012) 0.5 (0.02) 0.7 (0.03) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96) 0.2 (0.01) 0.4 (0.02) 0.5 (0.02) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20) 23.84 23.84 23.84 $134 $125 $115

75 mm range

30 mm range




C-C

ON, INC.

5-32

Sty

li an

d ac

cess

orie

s

M5 styli


Part number A-5003-5204 A-5003-5205 A-5003-5206 A-5003-5207 A-5003-5208 A-5003-5209 A-5003-5210A Ball dia. mm (inch) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20)B Length mm (inch) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79)C Stem dia. mm (in.) 0.7 (0.03) 1.0 (0.04) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 3.0 (0.12)D EWL* mm (inch) 5.0 (0.20) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.9 (0.47) 11.5 (0.45) Mass grammes 6.52 4.68 4.70 4.84 5.12 5.19 6.06 Price $71 $61 $61 $61 $61 $67 $67

20 mm range

Part number A-5003-5214 A-5003-5215 A-5003-5216 A-5003-5217 A-5003-5218 A-5003-5219 A-5003-5220A Ball dia. mm (inch) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16) 5.0 (0.20)B Length mm (inch) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19) 30.0 (1.19)C Stem dia. mm (in.) 0.7 (0.03) 1.0 (0.04) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 3.0 (0.12)

D EWL* mm (inch) 5.0 (0.20) 12.0 (0.48) 21.0 (0.83) 21.0 (0.83) 21.0 (0.83) 21.9 (0.86) 21.5 (0.85) Mass grammes 9.01 7.28 4.81 5.14 5.58 5.64 7.10 Price $77 $77 $67 $67 $67 $72 $77

30 mm range

Part number A-5003-5221 A-5003-5222 A-5003-5223 A-5003-5224

A Ball dia. mm (inch) 1.5 (0.06) 2.0 (0.08) 2.5 (0.10) 3.0 (0.12)B Length mm (inch) 40.0 (1.58) 40.0 (1.58) 40.0 (1.58) 40.0 (1.58)C Stem dia. mm (in.) 1.0 (0.04) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08)D EWL* mm (inch) 22.0 (0.87) 31.0 (1.23) 31.0 (1.23) 31.0 (1.23) Mass grammes 7.39 4.93 5.40 6.04 Price $96 $86 $86 $86

40 mm range





C-C

ON, INC.

5-33

Sty

li an

d ac

cess

orie

s

Ruby ball styli (<5 mm ball diameter)Part number A-5003-5228 A-5003-5229 A-5003-5230 A-5003-5231 A-5003-5233 A-5003-5232 A-5003-5234 A-5003-5235 Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide

A Ball dia. mm (inch) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 2.5 (0.10) 2.5 (0.10) 3.0 (0.12) 4.0 (0.16)B Length mm (inch) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97)C Stem dia. mm (in.) 0.7 (0.03) 1.0 (0.04) 1.0 (0.04) 1.0 (0.04) 1.5 (0.06) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08)D EWL* mm (inch) 5.0 (0.20) 5.0 (0.20) 41.0 (1.62) 5.0 (0.20) 5.0 (0.20) 41.0 (1.62) 41.0 (1.62) 41.9 (1.65) Mass grammes 15.81 14.82 5.05 14.85 14.94 6.48 6.50 6.55 Price $109 $105 $96 $77 $77 $86 $86 $86

50 mm range

Part number A-5003-5236 A-5003-5237 A-5003-5238 A-5003-5239 Tungsten carbide Carbon fi ber Carbon fi ber Carbon fi berA Ball dia. mm (inch) 5.0 (0.20) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40)B Length mm (inch) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97) 50.0 (1.97)C Stem dia. mm (inch) 3.0 (0.12) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)D EWL* mm (inch) 41.5 (1.63) 39.5 (1.56) 39.5 (1.56) 44.5 (1.75) Mass grammes 9.19 6.10 7.96 8.91 Price $86 $96 $105 $115

50 mm range

Ruby ball styli (>5 mm ball diameter)


B

A

D

C



C-C

ON, INC.

5-34

Sty

li an

d ac

cess

orie

s

M5 styli

Ruby ball styli (1 mm – 10 mm ball diameter)Part number A-5003-5243 A-5003-5244 A-5003-5248 A-5003-5249 A-5003-5250 A-5003-5251 A-5003-5252 Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Carbon fi ber Carbon fi ber Carbon fi berA Ball dia. mm (inch) 1.0 (0.04) 1.5 (0.06) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40)B Length mm (inch) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96) 75.0 (2.96)C Stem dia. mm (inch) 0.7 (0.03) 1.0 (0.04) 3.0 (0.12) 3.0 (0.12) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)D EWL* mm (inch) 5.0 (0.20) 5.0 (0.20) 66.0 (2.60) 66.0 (2.60) 65.1 (2.56) 64.5 (2.54) 69.5 (2.74) Mass grammes 23.86 23.90 11.61 11.80 6.59 9.06 10.01 Price $115 $105 $96 $105 $125 $115 $125

75 mm range

B

A

D

C* Effective working length



C-C

ON, INC.

5-35

Sty

li an

d ac

cess

orie

s

Ruby ball styli (≤ 50 mm EWL)Part number A-5003-5253 A-5003-5255 A-5003-5256 A-5003-5257 A-5003-5259 A-5003-5261 A-5003-5263 Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Carbon fi ber Carbon fi ber Carbon fi berA Ball dia. mm (inch) 3.0 (0.12) 4.0 (0.16) 4.0 (0.16) 5.0 (0.20) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40)B Length mm (inch) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94)C Stem dia. mm (inch) 2.0 (0.08) 2.0 (0.08) 3.0 (0.12) 3.0 (0.12) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)D EWL* mm (inch) 20.0 (0.79) 30.5 (1.20) 50.0 (1.97) 50.0 (1.97) 58.9 (2.32) 50.0 (1.97) 95.5 (3.76) Mass grammes 25.71 25.75 23.07 23.31 19.66 22.97 23.91 Price $125 $125 $144 $125 $134 $144 $153

100 mm range





C-C

ON, INC.

5-36

Sty

li an

d ac

cess

orie

s

M5 styli

Ruby ball styli (≥ 50 mm EWL)Part number A-5003-5254 A-5003-5258 A-5003-5260 A-5003-5262 A-5003-5264 Tungsten carbide Tungsten carbide Carbon fi ber Carbon fi ber Carbon fi berA Ball dia. mm (inch) 3.0 (0.12) 5.0 (0.20) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40)

B Length mm (inch) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94) 100.0 (3.94)C Stem dia. mm (inch) 1.5 (0.06) 3.0 (0.12) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)D EWL* mm (inch) 55.0 (2.17) 91.0 (3.59) 90.1 (3.55) 89.5 (3.52) 94.5 (3.72) Mass grammes 16.30 14.40 7.08 10.17 11.11 Price $144 $144 $153 $163 $173

100 mm range

B

A

D

C




C-C

ON, INC.

5-37

Sty

li an

d ac

cess

orie

s


150 mm range

A-5003-5268 A-5003-5269 A-5003-5270 6.0 (0.24) 8.0 (0.32) 10.0 (0.40) 200.0 (7.88) 200.0 (7.88) 200.0 (7.88) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24) 187.0 (7.36) 180.0 (7.09) 194.5 (7.66) 10.07 15.92 16.87 $326 $345 $364

200 mm range





C-C

ON, INC.

5-38

Sty

li an

d ac

cess

orie

s

M5 styli

Part number A-5003-5271 A-5003-5272 A-5003-5273A Ball dia. mm (inch) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40)B Length mm (inch) 300.0 (11.82) 300.0 (11.82) 300.0 (11.82)C Stem dia. mm (inch) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)D EWL* mm (inch) 287.0 (11.30) 280.0 (11.03) 294.5 (11.59) Mass grammes 12.02 20.33 21.28 Price $422 $441 $460

300 mm range


B

A

D

C




C-C

ON, INC.

5-39

Sty

li an

d ac

cess

orie

s

Stylus extensions – thermo stable carbon fi ber stems, titanium endsPart number A-5555-0647 A-5555-0648 A-5555-0649 A-5555-0623 A-5555-0650 A-5555-0651 A-5555-0652Length mm (inch) 40.0 (1.58) 50.0 (1.97) 60.0 (2.37) 70.0 (2.76) 80.0 (3.15) 90.0 (3.55) 100.0 (3.94)Stem dia. mm (inch) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44)Mass grammes 7.6 8.3 9.0 9.7 10.4 11.1 11.8Price $135** $139** $141** $145** $149** $153** $153**

** Special

A-5003-6134For M5

threaded styliPrice: $21

A-5003-6135For M5


Note: These tools are designed to fi t stylus extensions for Renishaw probes without causing any internal damage.

Stylus tools



C-C

ON, INC.

5-40

Sty

li an

d ac

cess

orie

sM5 styli

Stylus extensions – thermo stable carbon fi ber stems, titanium endsPart number A-5555-0425 A-5555-0424 A-5555-0653 A-5555-0654 A-5555-0655 A-5555-0642 A-5555-0656Length mm (inch) 120.0 (4.73) 150.0 (5.91) 180.0 (7.09) 200.0 (7.88) 250.0 (9.85) 300.0 (11.82) 400.0 (15.76)Stem dia. mm (inch) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44)Mass grammes 13.2 15.4 17.5 18.9 22.4 25.9 33.0Price $164** $176** $185** $193** $212** $229** $265**

** Special



C-C

ON, INC.

5-41

Sty

li an

d ac

cess

orie

s

Stylus extensions – thermo stable carbon fi ber stems, titanium endsPart number A-5555-0620 A-5555-0657 A-5555-0658 A-5555-0621 A-5555-0659 A-5555-0660 A-5555-0661Length mm (inch) 40.0 (1.58) 50.0 (1.97) 60.0 (2.37) 80.0 (3.15) 100.0 (3.94) 120.0 (4.73) 150.0 (5.91)Stem dia. mm (in.) 21.0 (0.83) 21.0 (0.83) 21.0 (0.83) 21.0 (0.83) 21.0 (0.83) 21.0 (0.83) 21.0 (0.83)Mass grammes 23.8 25.1 26.5 29.3 32.1 34.9 39.0Price $141** $145** $149** $156** $166** $174** $185**

** Special



C-C

ON, INC.

5-42

Sty

li an

d ac

cess

orie

s

M5 styli

Stylus extensions – thermo stable carbon fi ber stems, titanium endsPart number A-5555-0662 A-5555-0663 A-5555-0427 A-5555-0664 A-5555-0665 A-5555-0667 A-5555-0668Length mm (inch) 180.0 (7.09) 200.0 (7.88) 250.0 (9.85) 300.0 (11.82) 400.0 (15.76) 500.0 (19.70) 600.0 (23.64)Stem dia. mm (in.) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79)Mass grammes 43.2 46.0 52.9 59.9 73.8 87.7 101.5Price $198** $206** $227** $248** $288** $330** $370**

** Special



C-C

ON, INC.

5-43

Sty

li an

d ac

cess

orie

s

Stylus extensions – stainless steelPart number A-5555-0142 A-5555-0140 A-5555-0669 A-5555-0670 A-5555-0136Length mm (inch) 10.0 (0.40) 20.0 (0.79) 30.0 (1.19) 50.0 (1.97) 100.0 (3.94)Stem dia. mm (inch) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44) 11.0 (0.44)Mass grammes 6.0 13.0 20.0 34.8 73.0Price $32** $32** $34** $34** $29**

** Special



C-C

ON, INC.

5-44

Sty

li an

d ac

cess

orie

s

Stylus extensions – aluminumPart number A-5555-0671 A-5555-0127 A-5555-0125Length mm (inch) 50.0 (1.97) 100.0 (3.94) 200.0 (7.88)Stem dia. mm (inch) 20.0 (0.79) 20.0 (0.79) 20.0 (0.79)Mass grammes 47.2 50.0 85.0Price $58** $67** $84**

M5 styli

** Special



C-C

ON, INC.

5-45

Sty

li an

d ac

cess

orie

s

Part number A-5003-5288 A-5003-5289 A-5003-5290 A-5003-5291 Silver steel Silver steel Silver steel Silver steelDisc diameter mm (inch) 12.0 (0.48) 21.0 (0.83) 35.0 (1.38) 63.5 (2.51)Disc depth mm (inch) 3.0 (0.12) 3.0 (0.12) 5.0 (0.20) 5.0 (0.20)Roller depth mm (inch) 5.0 (0.20) 5.0 (0.20) 8.0 (0.32) 8.0 (0.32) Mass grammes 2.52 5.23 14.00 51.00Price $125 $134 $144 $163

Disc styli

Part number A-5003-5275 A-5003-5276 A-5003-5277 Ceramic Ceramic CeramicBall diameter mm (inch) 16.0 (0.63) 22.0 (0.87) 30.0 (1.19)Length mm (inch) 11.5 (0.46) 9.5 (0.38) 9.5 (0.38)Mass grammes 7.0 10.0 15.5Price $225 $225 $300

Hemispherical styli



C-C

ON, INC.

5-46

Sty

li an

d ac

cess

orie

s

Silicon nitride ball styli (M3)Part number A-5003-5723 A-5003-5061 A-5003-5724 A-5003-5725 A-5003-5726 A-5003-5727 Stainless steel Stainless steel Tungsten carbide Ceramic Carbon fi ber Carbon fi ber Thread size M3 M3 M3 M3 M3 M3A Ball diameter mm (inch) 2.0 (0.08) 4.0 (0.16) 2.0 (0.08) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)B Length mm (inch) 21.0 (0.83) 21.0 (0.83) 30.0 (1.19) 50.0 (1.97) 75.0 (2.96) 100.0 (3.94)C Stem dia. mm (inch) 1.4 (0.06) 2.5 (0.10) 1.5 (0.06) 2.0 (0.08) 4.0 (0.16) 4.0 (0.16)D EWL* mm (inch) 9.63 (0.38) 17.2 (0.68) 22.8 (0.90) 46.0 (1.82) 75.0 (2.96) 100.0 (3.94) Mass grammes 1.00 1.28 1.32 1.22 2.32 2.81 Price $48 $52 $100 $132 $221 $230

Specialist ball materials

B

A

D

C

Silicon nitride possesses many similar properties to ruby. It is a very hard and wear-resistant ceramic which can

be machined into very high-precision spheres. It can also be polished to an extremely smooth surface fi nish. Silicon

nitride does not have the attraction to aluminum and so does not exhibit the adhesive wear seen with ruby in similar

applications. Silicon nitride does, however, show signifi cant abrasive wear characteristics when scanning on steel

surfaces, so its applications are best confi ned to aluminum.





C-C

ON, INC.

5-47

Sty

li an

d ac

cess

orie

s

Silicon nitride ball styli (M4 and M5)Part number A-5003-5728 A-5003-5729 A-5003-5730 A-5003-5731 A-5003-5732 A-5003-5733 A-5003-5734 A-5003-5735 Stainless steel Stainless steel Carbon fi ber Carbon fi ber Tungsten carbide Tungsten carbide Carbon fi ber Carbon fi ber Thread size M4 M4 M4 M4 M5 M5 M5 M5A Ball dia. mm (inch) 2.0 (0.08) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24) 2.0 (0.08) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)B Length mm (inch) 19.0 (0.75) 18.0 (0.71) 50.0 (1.97) 100.0 (3.94) 20.0 (0.79) 20.0 (0.79) 50.0 (1.97) 100.0 (3.94)C Stem dia. mm (in.) 1.4 (0.05) 3.0 (0.12) 4.4 (0.18) 4.4 (0.18) 1.0 (0.04) 2.0 (0.08) 4.0 (0.16) 4.0 (0.16)D EWL* mm (inch) 9.2 (0.36) 13.7 (0.54) 38.5 (1.52) 88.5 (3.48) 11.0 (0.44) 11.9 (0.47) 39.5 (1.56) 56.9 (2.24) Mass grammes 2.30 2.08 5.02 6.12 4.70 5.17 6.02 19.58 Price $71 $63 $221 $240 $86 $94 $134 $188

Silicon nitride possesses many similar properties to ruby. It is a very hard and wear-resistant ceramic which can

be machined into very high-precision spheres. It can also be polished to an extremely smooth surface fi nish. Silicon

nitride does not have the attraction to aluminum and so does not exhibit the adhesive wear seen with ruby in similar

applications. Silicon nitride does, however, show signifi cant abrasive wear characteristics when scanning on steel

surfaces, so its applications are best confi ned to aluminum.




C-C

ON, INC.

5-48

Sty

li an

d ac

cess

orie

s

Part number A-5003-5736 A-5003-5737 A-5003-5738 A-5003-5739 A-5003-5740 A-5003-5741 Stainless steel Stainless steel Tungsten carbide Ceramic Carbon fi ber Carbon fi ber Thread size M3 M3 M3 M3 M3 M3A Ball diameter mm (inch) 2.0 (0.08) 4.0 (0.16) 2.0 (0.08) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)B Length mm (inch) 21.0 (0.83) 21.0 (0.83) 30.0 (1.19) 50.0 (1.97) 75.0 (2.96) 100.0 (3.94)C Stem dia. mm (inch) 1.4 (0.06) 2.5 (0.10) 1.5 (0.06) 2.0 (0.08) 4.0 (0.16) 4.0 (0.16)D EWL* mm (inch) 9.63 (0.38) 17.2 (0.68) 22.8 (0.90) 46.0 (1.82) 75.0 (2.96) 100.0 (3.94) Mass grammes 1.03 1.60 1.35 1.54 3.39 3.88 Price $48 $52 $100 $132 $221 $230

Zirconia ball styli (M3)

Zirconia is a particularly tough ceramic material with hardness and wear characteristics approaching those of ruby. Its

surface properties, however, make it an ideal material for aggressive scanning applications on cast iron components.





C-C

ON, INC.

5-49

Sty

li an

d ac

cess

orie

s

Zirconia ball styli (M4 and M5)Part number A-5003-5742 A-5003-5743 A-5003-5744 A-5003-5745 Stainless steel Stainless steel Carbon fi ber Carbon fi ber Thread size M4 M4 M4 M4A Ball dia. mm (inch) 2.0 (0.08) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24)B Length mm (inch) 19.0 (0.75) 18.0 (0.71) 50.0 (1.97) 100.0 (3.94)C Stem dia. mm (in.) 1.4 (0.05) 3.0 (0.12) 4.4 (0.18) 4.4 (0.18)D EWL* mm (inch) 9.2 (0.36) 13.7 (0.54) 38.5 (1.52) 88.5 (3.48) Mass grammes 2.33 2.40 6.09 7.19 Price $71 $63 $221 $240

A-5003-5746 A-5003-5747 A-5003-5748 A-5003-5749 Tungsten carbide Tungsten carbide Carbon fi ber Carbon fi ber M5 M5 M5 M5 2.0 (0.08) 4.0 (0.16) 6.0 (0.24) 6.0 (0.24) 20.0 (0.79) 20.0 (0.79) 50.0 (1.97) 100.0 (3.94) 1.0 (0.04) 2.0 (0.08) 4.0 (0.16) 4.0 (0.16) 11.0 (0.44) 11.9 (0.47) 39.5 (1.56) 58.9 (2.32) 4.73 5.49 7.09 20.65 $86 $94 $134 $188

Zirconia is a particularly tough ceramic material with hardness and wear characteristics approaching those of ruby. Its

surface properties, however, make it an ideal material for aggressive scanning applications on cast iron components.

B

A

D

C




C-C

ON, INC.

5-50

Sty

li an

d ac

cess

orie

s

Stylus knuckles

Part number A-5000-7534 A-5003-4697 A-5000-9902 A-5000-7616 A-5003-4686 A-5003-4689 A-5003-5278 A-5003-5279 Rotary Rotary Rotary Rotary RotaryThread size M2 M2 M2 M3 M3 M4 M5 M5Effective length mm (inch) 8.0 (0.32) 13.5 (0.54) 16.5 (0.65) 12.0 (0.48) 17.0 (0.67) 33.0 (1.30) 36.5 (1.44) 46.5 (1.84)Center offset mm (inch) 4.5 (0.18) NA NA 6.0 (0.24) NA NA NA NAMass grammes 1.6 1.1 1.3 3.7 1.5 9.8 16.5 64.9Price $59 $108 $70 $59 $130 $140 $72 $86

Stylus centers

Center size

Effective length

Part number A-5000-8395 A-5000-3627 A-5000-7610 A-5000-7792 A-5003-0854 A-5003-0855 4-way 5-way 5-way 5-way 5-way 5-wayThread size M2 M2 M3 M4 M5 M5Effective length mm (inch) 7.5 (0.30) 8.0 (0.32) 13.0 (0.52) 18.0 (0.71) 15.0 (0.59) 20.0 (0.80)Center size mm (inch) 7.5 (0.30) 7.5 (0.30) 10.0 (0.40) 15.0 (0.60) 15.0 (0.59) 20.0 (0.80)Mass grammes 1.1 0.8 2.4 12.1 12.5 31.6Price $64 $43 $50 $60 $81 $88

Accessories

Accessories



C-C

ON, INC.

5-51

Sty

li an

d ac

cess

orie

s

Adaptors

Part number M-5000-4164 M-5000-4163 M-5000-6622 M-5000-6714 M-5000-6625 M-5000-9301 A-5003-0856 A-5555-0227 Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steelMale/female thread M2/M3 M3/M2 M4/M2 M4/M3 M4/M3 M5/M4 M5/M4 M5/M3Length mm (inch) 7.0 (0.28) 5.0 (0.20) 5.0 (0.20) 9.0 (0.36) 20.0 (0.79) 6.5 (0.26) 9.0 (0.36) 10.0 (0.40)Mass grammes 0.4 0.6 1.5 1.4 3.2 6.0 4.6 5.0Price $12 $12 $32 $32 $20 $32 $29 $15

Part number A-5555-0226 A-5000-7751 M-5000-8167 A-5000-7752 A-5000-7753 A-2054-4657 A-5000-9302 A-5000-9303 Stainless steel Ceramic Stainless steel Ceramic Ceramic Stainless steel Stainless steel Stainless steelMale/female thread M5/M2 M4/M3 TF6/M3 M4/M3 M4/M3 M4/Ø4.5 M5/Ø8.0 M5/Ø10.0Length mm (inch) 10.0 (0.40) 50.0 (1.97) 18.0 (0.71) 75.0 (2.96) 100.0 (3.94) 10.0 (0.40) 22.0 (0.87) 22.0 (0.87)Mass grammes 5.0 4.4 1.9 5.2 6.3 5.0 18.0 20.0Price $15 $60 $35 $91 $104 $34 $62 $62



C-C

ON, INC.

5-52

Sty

li an

d ac

cess

orie

s

Cubes and boltsPart number A-5555-0189 A-5555-0190 A-5555-0194 A-5003-5683 A-5003-5684 Titanium Titanium Titanium Titanium TitaniumThread size M5 M5 M5 M5 – M2 M5 – M2Length mm (inch) 15.0 (0.60) 20.0 (0.79) 20.0 (0.79) 15.0 (0.60) 20.0 (0.79)Width mm (inch) 15.0 (0.60) 20.0 (0.79) 40.0 (1.58) 15.0 (0.60) 20.0 (0.79)Mass grammes 12.85 32.55 63.50 13.75 35.18Price $46 $52 $122 $86 $101

Part number A-5003-5679 A-5003-5678 A-5003-5677 A-5003-5676 Stainless steel Stainless steel Stainless steel Stainless steelThread size M5 – M2 M5 – M2 M5 M5

Length mm (inch) 28.0 (1.11) 33.0 (1.30) 28.0 (1.11) 33.0 (1.30)Mass grammes 6.7 7.1 6.0 6.4Price $18 $18 $18 $18

Stylus tools

M-5000-3540For M2 and M3threaded styli

Price: $9

A-5003-2300For the M2 carbon fi ber

range of styliPrice: $48

M-5000-3707For M4


M-5000-9304For M5


These tools are designed to fi t styli to Renishaw probes without causing any internal damage.

Accessories

A-5003-6134For M5


A-5003-6135For M5




C-C

ON, INC.

5-53

Sty

li an

d ac

cess

orie

s

Stylus kits

www.renishaw.com

M2 comprehensive stylus kit A-5000-0001 Price: $2,808

Position Part number Description1 A-5000-3626 M2 STR D2 5BALL L19.2 S302 A-5000-7810 M2 DSC D25SLVS T1.5 L8.6 BR-Y2.53 A-5000-7629 M2 STR D2 5BALL L19.2 S184 A-5000-3627 M2 ACC CENTRE 5WAY5 A-5000-7534 M2 ACC KNUCKLE OFFSET6 A-5000-7809 M2 DSC D18SLVS T1.5 L8.6 BR-Y2.57 A-5000-7811 M2 STR D1 4BALL L7.5T S108 A-5000-3614 M2 HEM D18CE9 M-5000-4164 M2-M3 EXT L7SS

10-11 M-5000-3540 M2-M3 STYLUS TOOL12-15 M-5000-7634 M2 EXT L5 D3SS16-17 M-5000-4162 M2 EXT L30 D3SS18-19 M-5000-7779 M2 EXT L40 D3SS

20 P-TL01-0150 S3 HEX WRENCH 1.5 MM A/F21 A-5000-3611 M2 DSC D6R T1.2 L10 BR-Y222 A-5000-7813 M2 PNT D1.4TC 30DEG L10

23-24 A-5000-7806 M2 STY D1R L10 EWL4.5 D0.7SS25 A-5000-7802 M2 STY D1.5R L10 EWL4.5 D0.7SS

26-28 A-5000-7807 M2 STY D2R L10 EWL6 D1SS29 A-5000-7803 M2 STY D2.5R L10 EWL6 D1SS30 A-5000-3604 M2 STY D3R L10 EWL7.5 D1.5SS

31-32 A-5000-7805 M2 STY D0.5R L10 EWL3 D0.4TC33 A-5000-7801 M2 STY D0.7R L10 EWL4 D0.5TC34 A-5000-7800 M2 STY D0.3R L10 EWL2 D0.2TC35 A-5000-4158 M2 STY D8R L11 EWL11 D2.5SS

36-37 A-5000-4156 M2 STY D6R L10 EWL10 D2.5SS39-39 A-5000-4155 M2 STY D5R L10 EWL10 D2.5SS40-42 A-5000-4154 M2 STY D4R L10 EWL10 D1.5SS43-46 A-5000-3604 M2 STY D3R L10 EWL7.5 D1.5SS47-48 M-5000-3648 M2 EXT L20 D3SS

49 A-5000-7808 M2 STY D1R L20 EWL7 D0.7TC50-54 A-5000-3603 M2 STY D2R L20 EWL14 D1.4SS55-56 A-5000-7804 M2 STY D2.5R L20 EWL16.5 D1.4SS57-58 A-5000-4160 M2 STY D3R L20 EWL17.5 D1.5SS59-60 M-5000-3647 M2 EXT L10 D3SS

61 M-5000-4152 M2 CYL D1.5SLVS L11 EWL1.562 M-5000-3647 M2 EXT L10 D3SS63 M-5000-4153 M2 CYL D3SLVS L13 EWL3.864 A-5000-4160 M2 STY D3R L20 EWL17.5 D1.5SS

65-67 A-5000-4161 M2 STY D4R L20 EWL20 D1.5SS68 M-5000-4150 M2 PNT D3SLVS 30DEG L1569 A-5000-7812 M2 SPH D2R L20 EWL7.2 SS



C-C

ON, INC.

5-54

Sty

li an

d ac

cess

orie

s

Stylus kits

www.renishaw.com

M2 stylus enhancement kit A-5000-0002 Price: $1,032

Position Part number Description

1 A-5000-7810 M2 DSC D25SLVS T1.5 L8.6 BR-Y2.5

2 P-TL01-0150 S3 HEX WRENCH 1.5 MM A/F

3-4 M-5000-3540 M2-M3 STYLUS TOOL

5 A-5000-7811 M2 STR D1 4BALL L7.5T S10

6 A-5000-7809 M2 DSC D18SLVS T1.5 L8.6 BR-Y2.5

7 M-5000-7779 M2 EXT L40 d3SS

8 A-5000-7813 M2 PNT D1.4TC 30deg L10

9 A-5000-7801 M2 STY D0.7R L10 EWL4 d0.5TC

10 A-5000-7805 M2 STY D0.5R L10 EWL3 d0.4TC

11 A-5000-7800 M2 STY D0.3R L10 EWL2 d0.2TC

12 A-5000-7803 M2 STY D2.5R L10 EWL6 d1SS

13 A-5000-7807 M2 STY D2R L10 EWL6 d1SS

14 A-5000-7802 M2 STY D1.5R L10 EWL4.5 d0.7SS

15 A-5000-7806 M2 STY D1R L10 EWL4.5 d0.7SS

16-17 A-5000-7804 M2 STY D2.5R L20 EWL16.5 d1.4SS

18 A-5000-7812 M2 SPH D2R L20 EWL7.2 SS

19 A-5000-7808 M2 STY D1R L20 EWL7 d0.7TC



C-C

ON, INC.

5-55

Sty

li an

d ac

cess

orie

s

www.renishaw.com

M2 high performance kit A-5003-2310 Price: $710


1 A-5003-2283 M2 EXT L90 d3CF

2 A-5003-2282 M2 EXT L70 d3CF

3 A-5003-2281 M2 EXT L50 d3CF

4 A-5003-2280 M2 EXT L40 d3CF

5 A-5003-2287 M2 STY D6R L50 EWL50 d3CF

6 A-5003-2286 M2 STY D5R L50 EWL50 d3CF

7 A-5003-2285 M2 STY D4R L50 EWL50 d3CF

8-9 M-5000-3540 M2-M3 STYLUS TOOL

10-11 A-5003-2300 M2 STYLUS TOOL CF RANGE



C-C

ON, INC.

5-56

Sty

li an

d ac

cess

orie

s

Stylus kits

www.renishaw.com

Stylus kit 201 for M2 probes

Price: $630

1 2 3 4 5 6

7 8 9 10 11 12

Position Part number Quantity Description

1 A-5000-7806 1 M2 STY D1R L10 EWL4.5 d0.7SS

2 A-5000-7807 1 M2 STY D2R L10 EWL6 d1SS

3 A-5000-3604 1 M2 STY D3R L10 EWL7.5 d1.5SS

4 A-5000-3603 1 M2 STY D2R L20 EWL14 d1.4SS

5 A-5000-4160 1 M2 STY D3R L20 EWL17.5 d1.5SS

6 A-5000-3611 1 M2 DSC D6R T1.2 L10 BR-Y2

7 A-5000-3626 1 M2 STR D2 5BALL L19.2 S30

8 A-5000-7809 1 M2 DSC D18SLVS T1.5 L8.6 BR-Y2.5

9 M-5000-3647 2 M2 EXT L10 d3SS

10 A-5000-7534 1 M2 ACC KNUCKLE OFFSET

11 M-5000-3540 2 M2-M3 STYLUS TOOL

12 P-TL01-0150 1 S3 HEX WRENCH 1.5 MM A/F

13 M-5000-3541 1 S8 TP2 SPANNER (not pictured)

14 A-1015-7658 1 TP2 & STYLI BOX (not pictured)



C-C

ON, INC.

5-57

Sty

li an

d ac

cess

orie

s

www.renishaw.com


Price: $1,290

1 2 3 4 5 6 7 8 9 10 11 12 13 14

15 16 17 18 19 20 21 22 23 24 25


1 A-5000-7806 1 M2 STY D1R L10 EWL4.5 d0.7SS

2 A-5000-7807 1 M2 STY D2R L10 EWL6 d1SS

3 A-5000-3604 1 M2 STY D3R L10 EWL7.5 d1.5SS

4 A-5000-4154 1 M2 STY D4R L10 EWL10 d1.5SS

5 A-5000-4155 1 M2 STY D5R L10 EWL10 d2.5SS

6 A-5000-4156 1 M2 STY D6R L10 EWL10 d2.5SS

7 A-5000-4158 1 M2 STY D8R L11 EWL11 d2.5SS

8 A-5000-3603 1 M2 STY D2R L20 EWL14 d1.4SS

9 A-5000-4160 1 M2 STY D3R L20 EWL17.5 d1.5SS

10 A-5000-4161 1 M2 STY D4R L20 EWL20 d1.5SS

11 A-5000-3611 1 M2 DSC D6R T1.2 L10 BR-Y2

12 M-5000-4152 1 M2 CYL D1.5SLVS L11 EWL1.5

13 M-5000-4153 1 M2 CYL D3SLVS L13 EWL3.8

14 M-5000-4150 1 M2 PNT D3SLVS 30deg L15



17 A-5000-3614 1 M2 HEM D18CE


19 M-5000-4163 1 M3-M2 EXT L5SS

20 A-5000-3627 1 M2 ACC CENTRE 5WAY

21 M-5000-3647 2 M2 EXT L10 d3SS

22 M-5000-3648 2 M2 EXT L20 d3SS

23 M-5000-4162 2 M2 EXT L30 d3SS

24 M-5000-3540 2 M2-M3 STYLUS TOOL



27 A-1015-7749 1 COMP BOX ASSEMBLY (not pictured)



C-C

ON, INC.

5-58

Sty

li an

d ac

cess

orie

s

www.renishaw.com


Price: $1,972

1 2 3 4 5 6 7 8 9 10 11 12 13 14

15 16 17 18 19 20 21 22 23 24 25

Stylus kits


1 A-5000-7806 5 M2 STY D1R L10 EWL4.5 d0.7SS

2 A-5000-7807 3 M2 STY D2R L10 EWL6 d1SS

3 A-5000-3604 5 M2 STY D3R L10 EWL7.5 d1.5SS

4 A-5000-4154 3 M2 STY D4R L10 EWL10 d1.5SS

5 A-5000-4155 2 M2 STY D5R L10 EWL10 d2.5SS

6 A-5000-4156 2 M2 STY D6R L10 EWL10 d2.5SS

7 A-5000-4158 1 M2 STY D8R L11 EWL11 d2.5SS

8 A-5000-3603 5 M2 STY D2R L20 EWL14 d1.4SS

9 A-5000-4160 3 M2 STY D3R L20 EWL17.5 d1.5SS

10 A-5000-4161 3 M2 STY D4R L20 EWL20 d1.5SS

11 A-5000-3611 1 M2 DSC D6R T1.2 L10 BR-Y2

12 M-5000-4152 1 M2 CYL D1.5SLVS L11 EWL1.5

13 M-5000-4153 1 M2 CYL D3SLVS L13 EWL3.8

14 M-5000-4150 1 M2 PNT D3SLVS 30deg L15



17 A-5000-3614 1 M2 HEM D18CE


19 M-5000-4163 1 M3-M2 EXT L5SS


21 M-5000-3647 3 M2 EXT L10 d3SS

22 M-5000-3648 2 M2 EXT L20 d3SS

23 M-5000-4162 2 M2 EXT L30 d3SS

24 M-5000-3540 2 M2-M3 STYLUS TOOL



27 A-1015-7749 1 COMP BOX ASSEMBLY (not pictured)



C-C

ON, INC.

5-59

Sty

li an

d ac

cess

orie

s

www.renishaw.com


Price: $805

1 2 3 4 5 6

7 8 9 10 11 12 13


1 A-5000-3551 1 M3 STY D1R L21 EWL4 d0.6SS

2 A-5000-3552 1 M3 STY D2R L21 EWL8 d1.4SS

3 A-5000-3553 1 M3 STY D3R L21 EWL12 d1.5SS

4 A-5000-3554 5 M3 STY D4R L31 EWL27 d2.5SS

5 A-5000-7648 1 M3 STY D5R L31 EWL31 d3.5SS

6 A-5000-3615 1 M3 DSC D12.7SLVS T2 L30.8 BR-N

7 A-5000-7669 1 M3 DSC D63.5CS T6 L4 BR-N

8 M-5000-3593 1 M3 EXT L35 d4SS

9 M-5000-3592 1 M3 EXT L20 d4SS



12 M-5000-3540 2 M2-M3 STYLUS TOOL


14 A-1041-7569 1 SA7 ADAPTOR (not pictured)

15 M-5000-3571 2 STYLUS SHANK ADAPTOR (not pictured)

16 A-1015-7650 1 TP1 STYLI BOX (not pictured)



C-C

ON, INC.

5-60

Sty

li an

d ac

cess

orie

s

www.renishaw.com


Price: $1,209

1 2 3 4 5 6 7

8 9 10 11 12 13 14

Stylus kits


1 A-5000-3551 3 M3 STY D1R L21 EWL4 d0.6SS

2 A-5000-3552 5 M3 STY D2R L21 EWL8 d1.4SS

3 A-5000-3553 3 M3 STY D3R L21 EWL12 d1.5SS

4 A-5000-3554 7 M3 STY D4R L31 EWL27 d2.5SS

5 A-5000-7648 1 M3 STY D5R L31 EWL31 d3.5SS

6 A-5000-3615 1 M3 DSC D12.7SLVS T2 L30.8 BR-N

7 A-5000-7669 1 M3 DSC D63.5CS T6 L4 BR-N

8 M-5000-3593 2 M3 EXT L35 d4SS

9 M-5000-3592 2 M3 EXT L20 d4SS

10 M-5000-4164 1 M2-M3 EXT L7SS



13 M-5000-3540 2 M2-M3 STYLUS TOOL


15 A-1041-7569 1 SA7 ADAPTOR (not pictured)

16 M-5000-3571 2 STYLUS SHANK ADAPTOR (not pictured)

17 A-1015-7650 1 TP1 STYLUS BOX (not pictured



C-C

ON, INC.

5-61

Sty

li an

d ac

cess

orie

s

A-5003-6151 M3 stylus kit for SP25M/SM25-1/SH25-1

www.renishaw.com

Price: $435

A-5003-6152 M3 stylus kit for SP25M/SM25-2/SH25-2Price: $455

7

1

2

3

4

5

www.renishaw.com


1 A-5003-5970M3 STY D3R L21 EWL13.5 d2CF

2 A-5003-5971M3 STY D4R L21 EWL13.5 d3CF

3 A-5003-5977M3 STY D4SIN L21 EWL13.5 d3CF

4 A-5003-5972M3 STY D4R L31 EWL23.5 d3CF

5 A-5003-5973M3 STY D4R L40 EWL32.5 d3CF

6 A-5003-5974M3 STY D5R L50 EWL42.5 d3CF

7 M-5000-3540M2-M3 STYLUS TOOL


1 A-5003-5975M3 STY D5R L21 EWL13.5 d3CF

2 A-5003-5978M3 STY D5SIN L21 EWL13.5 d3CF

3 A-5003-5974M3 STY D5F L50 EWL42.5 d3CF

4 A-5003-5976M3 STY D6R L50 EWL50 d4CF

5 A-5003-4860M3 STY D6R L75 EWL75 d4CF


1

2

3

4

5

6

6



C-C

ON, INC.

5-62

Sty

li an

d ac

cess

orie

s

Stylus kits


www.renishaw.com

Price: $515


1 A-5003-5975M3 STY D5R L21 EWL13.5 d3C/F

2 A-5003-5978M3 STY D5SIN L21 EWL13.5 d3C/F

3 A-5003-5974M3 STY D5R L50 EWL42.5 d3C/F

4 A-5003-4860M3 STY D6R L75 EWL75 d4C/F

5 A-5003-4863M3 STY D8R L100 EWL100 d4C/F


1

2

3

4

5

6



C-C

ON, INC.

5-63

Sty

li an

d ac

cess

orie

s


www.renishaw.com

Price: $1,200


1 A-5003-7057 M3 STY D10R L25 EWL75 d4C/F

2 M-5000-3540 M2-M3 STYLUS TOOL

3 A-5003-7056 M3 STY D10R L100 EWL100 d4C/F

4 A-5003-7055 M3 STY D10R L150 EWL150 d4C/F

5 M-5000-3540 M2-M3 STYLUS TOOL

6 A-5003-7054 M3 STY D10R L200 EWL200 d4C/F

7 A-5003-0069 M3 STY D5R L50 EWL50 d2.5CER

8 A-5000-7630 M3 STY D5R L21 EWL21 d2.5SS

1

2

3

4

5

6

7

8



C-C

ON, INC.

5-64

Sty

li an

d ac

cess

orie

s

Stylus kits

A-5000-7829 M4 stylus kit (TP7M use)

www.renishaw.com

Price: $1,614


1 A-5000-7796 M4 STY D8R L100 EWL100 d4.5CE

2 A-5000-7753 M4-M3 EXT L100CE

3 A-5000-7752 M4-M3 EXT L75CE

4 A-5000-7795 M4 STY D8R L50 EWL50 d4.5CE

5 A-5000-7751 M4-M3 EXT L50C

6 A-5000-7755 M4 EXT L50 d7.4CE

7 A-5000-7754 M4 EXT L30 d7.4CE

8 A-5000-7792 M4 ACC CENTRE 5WAY

9 A-5000-7814 M3 HEM D30CE

10-11 M-5000-6714 M4-M3 EXT L9SS



14-18 M-5000-4163 M3-M2 EXT L5SS

19-20 M-5000-3707 M4 STYLUS TOOL

21-22 M-5000-3540 M2-M3 STYLUS TOOL

23 M-5000-6625 M4-M3 EXT L20SS

24 A-5000-7545 M4 STY D1R L19.5 EWL4 d0.7SS

25-28 A-5000-7547 M4 STY D2R L19 EWL8 d1.4SS

29 A-5000-7551 M4 STY D4R L18 EWL13 d3SS



C-C

ON, INC.

5-65

Sty

li an

d ac

cess

orie

s

16151413121110987

65321 4

Price: $900

A-5003-6168 M5 stylus kit SP80

www.renishaw.com


1-2 M-5000-9304 M5 STYLUS TOOL

3 A-5003-6134 M5 ACC D11 EXTENSION TOOL


5-6 A-5003-5680 M5 ACC 15X15 CUBE

7-8 A-5555-0136 M5 EXT L100 d11SS

9-10 A-5555-0670 M5 EXT L50 d11SS

11-12 A-5003-5218 M5 STY D3R L30 EWL21 d2TC

13-14 A-5003-5236 M5 STY D5R L50 EWL41 d3TC

15 A-5003-5251 M5 STY D8R L75 EWL62 d6CF

16 A-5003-5262 M5 STY D8R L100 EWL87 d6CF



C-C

ON, INC.

5-66

Sty

li an

d ac

cess

orie

s

Stylus kits

Price: $1,236

A-5003-5911 M5 stylus kit - standard

www.renishaw.com


1 A-5003-5680 M5 ACC 15X15 CUBE

2 A-5003-5677 M5 ACC CUBE BOLT L28

3-4 M-5000-9304 M5 STYLUS TOOL



7-8 A-5555-0670 M5 EXT L50 d11SS

9-10 A-5555-0136 M5 EXT L100 d11SS

11 A-5003-5262 M5 STY D8R L100 EWL87 d6CF

12-14 A-5003-5251 M5 STY D8R L75 EWL62 d6CF

15-17 A-5003-5236 M5 STY D5R L50 EWL41 d3TC

18-20 A-5003-5218 M5 STY D3R L30 EWL21 d2TC

21 A-5003-5733 M5 STY D4SN L20 EWL11 d2TC



C-C

ON, INC.

5-67

Sty

li an

d ac

cess

orie

s

Price: $3,760

www.renishaw.com

A-5003-5909 M5 stylus kit - comprehensive


1-4 A-5003-5680 M5 ACC 15X15 CUBE

5-8 A-5003-5677 M5 ACC CUBE BOLT L28

9-10 A-5003-5278 M5 ACC KNUCKLE d11 ROTARY

11-14 A-5555-0669 M5 EXT L30 d11SS

15-16 A-5555-0623 M5 EXT L70 d11CF

17-18 A-5555-0652 M5 EXT L100 d11CF

19-22 A-5555-0648 M5 EXT L50 d11CF

23-24 A-5555-0654 M5 EXT L200 d11CF

25-27 M-5000-9304 M5 STYLUS TOOL

28-29 A-5003-6134 M5 ACC D11 EXTENSION TOOL



32 A-5003-5261 M5 STY D8R L100 EWL50 d6CF

33 A-5003-5262 M5 STY D8R L100 EWL87 d6CF

34-35 A-5003-5251 M5 STY D8R L75 EWL62 d6CF

36-37 A-5003-5236 M5 STY D5R L50 EWL41 d3TC

38-39 A-5003-5234 M5 STY D3R L50 EWL41 d2TC

40-43 A-5003-5218 M5 STY D3R L30 EWL21 d2TC


45 A-5003-5288 M5 DSC D12SLVS T3 L3 BR-Y5


47 A-5003-5276 M5 HEM D22CE d7SS



C-C

ON, INC.

5-68

Sty

li an

d ac

cess

orie

s

Stylus kits

764 52 31 1312111098

2423

18 19

16 1715

25

14

20 21

26 27 28 29 30 31 32 33 35 36 3734

22

Price: $2,575

www.renishaw.com

A-5003-5910 M5 stylus kit - general purpose


1 A-5003-5279 M5 ACC KNUCKLE d20 ROTARY

2-3 A-5555-0140 M5 EXT L20 d11SS

4 A-5555-0669 M5 EXT L30 d11SS

5-6 A-5555-0648 M5 EXT L50 d11CF

7-8 A-5555-0671 M5 EXT L50 d20AL

9-10 A-5555-0652 M5 EXT L100 d11CF

11-12 A-5555-0127 M5 EXT L100 d20AL

13 A-5555-0125 M5 EXT L200 d20AL

14 A-5003-5676 M5 ACC CUBE BOLT L33

15-16 A-5003-5681 M5 ACC 20X20 CUBE






23-25 M-5000-9304 M5 STYLUS TOOL

26 A-5003-5262 M5 STY D8R L100 EWL87 d6CF

27 A-5003-5251 M5 STY D8R L75 EWL62 d6CF

28 A-5003-5238 M5 STY D8R L50 EWL37 d6CF

29-31 A-5003-5236 M5 STY D5R L50 EWL41 d3TC

32-33 A-5003-5218 M5 STY D3R L30 EWL21 d2TC




37 A-5003-5276 M5 HEM D22CE d7SS



C-C

ON, INC.

5-69

Sty

li an

d ac

cess

orie

s

1

2

3

4

5

6

7

8 9

10

11

Price: $1,475

www.renishaw.com

A-5003-5912 M5 stylus extension kit - 11 mm


1-2 A-5555-0654 M5 EXT L200 d11CF

3-4 A-5555-0424 M5 EXT L150 d11CF

5-7 A-5555-0652 M5 EXT L100 d11CF

8-9 A-5555-0648 M5 EXT L50 d11CF




C-C

ON, INC.

5-70

Sty

li an

d ac

cess

orie

s

1

2

3

4

5

6

7

8

9

10

11

12

13

www.renishaw.com


1-2 A-5555-0664 M5 EXT L300 d20CF

3-5 A-5555-0663 M5 EXT L200 d20CF

6-8 A-5555-0661 M5 EXT L150 d20CF

9-11 A-5555-0659 M5 EXT L100 d20CF


Stylus kits

Price: $2,065

A-5003-5913 M5 stylus extension kit - 20 mm



C-C

ON, INC.

5-71

Sty

li an

d ac

cess

orie

s

Styli for Faro armsThese styli have been designed especially for use on FARO

portable arm CMMs. Their robust design and construction

utilizes Grade 5 Zirconia balls that have a high fracture

toughness. The balls are bonded to the high strength tungsten

carbide stem with impact resistant adhesive, and specialist

construction techniques have been incorporated to ensure that

the joint between the body and stem is extremely rigid and

virtually indestructible.

1¼–20 UN thread styli

M6 styli

Part number A-5003-7676 A-5003-7677 A-5003-7678 A-5003-7679Ball dia 1/8 in 1/4 in 3 mm 6 mmLength (mm) 43 43 43 43Price $150 $150 $146 $146

Part number A-5003-7673 A-5003-7674 A-5003-7675Cap dia(mm) 3 6Length (mm) 57 57 57Price $150 $150 $150

Styli Issue 15 Zeiss and Faro.in5-71 5-71Styli Issue 15 Zeiss and Faro.in5-71 5-71 30/07/2008 10:48:5930/07/2008 10:48:59


C-C

ON, INC.

5-72

Sty

li an

d ac

cess

orie

s

Styli for Zeiss probing systems

M5 styli, adaptors and accessories for Zeiss analog probe systems without probe changing

Standard probes (tungsten carbide)Part number A-5555-0001 A-5555-0002 A-5555-0003 A-5555-0004 A-5555-0005 A-5555-0006 A-5555-0007 A-5555-0008Zeiss order number 600331-9096 602030-9003 602030-9004 600331-9098 602030-9005 602030-9006 602030-9007 600331-9097d (mm) 3 3 3 3 5 5 5 8L (mm) 50 75 75 115 75 75 100 80D (mm) 19 19 19 19 19 19 19 19ML (mm) 21.5 35 50 18 35 50 60 57ds (mm) 2 2 2 2 3.5 3.5 3.5 6Weight (g) 23 30 22 56 34 28 38 45Price $82 $90 $90 $82 $100 $100 $95 $82

Part number A-5555-0009 A-5555-0010 A-5555-0011Zeiss order number 600331-9099 602030-9008 602030-9009d (mm) 8 8 8L (mm) 100 115 140D (mm) 19 19 19ML (mm) 60 56.5 100ds (mm) 6 6 6Weight (g) 57 68 74Price $86 $88 $100

dds

D

L

ML

With cone for direct screw attachment to the measuring probe head

Swivel piece with conePart number A-5555-0012Zeiss order number 602030-8357L (mm) 34D (mm) 18Weight (g) 51Price $115

The swivel piece is used to adjust the mounted probes (e.g. star styli) in X/Y.

D

L

Adaptor with conePart number A-5555-0013Zeiss order number 600331-0001D (mm) 19Weight (g) 12Price $29

For mounting the probe elements on to the measuring probe head without probe changing.

D

AdaptorPart number A-5555-0014Zeiss order number 602030-0018D (mm) 18Weight (g) 12Price $28

For mounting of styli with cone on to probe heads.

D

Holders with conePart number A-5555-0015 A-5555-0016 A-5555-0017Zeiss order number 602030-8350 602030-8351 602030-8352d (mm) 2 3.5 6L (mm) 24 24 24D (mm) 19 19 19Weight (g) 29 29 29Price $47 $47 $47

Holder for special styli (for measuring probe head only)

d

D

L

Schematics not shown to scale



C-C

ON, INC.

5-73

Sty

li an

d ac

cess

orie

s

M5 styli, adaptors and accessories for Zeiss measuring probe head with probe changer and dynamic probe head (with or without probe changer)

Standard styli (tungsten carbide)

Part number A-5555-0018 A-5555-0019 A-5555-0020 A-5555-0021 A-5555-0022 A-5555-0023 A-5555-0024 A-5555-0025Zeiss order number 602030-9010 600342-8020 602030-9011 600342-8021 600342-8025* 602030-9012* 602030-9013 600342-8022d (mm) 3 3 3 3 4 4 5 5L (mm) 25 33.5 50 58 33.5 64 50 53D (mm) 11 11 11 11 11 11 11 11ML (mm) 15 23.5 40 48 23.5 54 40 43ds (mm) 2 2 2 2 2 2 3.5 3.5Weight (g) 4 4 5 6 4 6 9 9Price $35 $37 $38 $38 $42 $48 $43 $57

Part number A-5555-0026 A-5555-0027 A-5555-0028 A-5555-0029 A-5555-0030 A-5555-0031 A-5555-0032 A-5555-0033Zeiss order number 602030-9015 600342-8026 600342-8027 600342-8023 600342-8123 602030-9014 602030-9016 602030-9017d (mm) 5 6 7 8 8 8 8 8L (mm) 75 54 55 63.5 63.5 74 75 100D (mm) 11 11 11 11 19 11 11 11ML (mm) 65 44 45 50.5 41.5 61 62 87ds (mm) 3.5 3.5 3.5 6 6 6 6 6Weight (g) 13 10 10 25 37 30 30 41Price $56 $47 $48 $49 $60 $67 $60 $62

Part number A-5555-0034 A-5555-0035 A-5555-0036 A-5555-0037 A-5555-0038 A-5555-0039 A-5555-0040Zeiss order number 600342-8024 600342-8124 600342-8028 600342-8128 600342-8029 600342-8129 602030-9018d (mm) 8 8 9 9 10 10 10L (mm) 114.5 114.5 64.5 64.5 65.5 65.5 118D (mm) 11 19 11 19 11 19 11ML (mm) 101.5 92.5 50.5 42.5 52.5 43.5 105ds (mm) 6 6 6 6 6 6 6Weight (g) 46 59 26 38 27 38 47Price $65 $69 $86 $69 $67 $79 $74

dds

L

MLD

* = drilled ball




C-C

ON, INC.

5-74

Sty

li an

d ac

cess

orie

s


Part number A-5555-0041 A-5555-0042 A-5555-0043 A-5555-0044 A-5555-0045 A-5003-0826 A-5555-0047 A-5003-0827Zeiss order number 600342-8013 600342-8016 600342-8017 600342-8014 600342-8018 600342-8118 600342-8019 600342-8119d (mm) 5 6 7 8 9 9 10 10L (mm) 53 54 55 63.5 64.5 64.5 65.5 65.5D (mm) 11 11 11 11 11 19 11 19ML (mm) 43 44 45 50.5 51.5 42.5 52.5 43.5ds (mm) 3.5 3.5 3.5 6 6 6 6 6Weight (g) 5 5 5 8 9 34 9 33Price $48 $48 $62 $64 $70 $113 $82 $124

Part number A-5003-0824 A-5555-0050 A-5555-0051Zeiss order number 600342-8114 600342-8015 600342-8115d (mm) 8 8 8L (mm) 63.5 114.5 114.5D (mm) 19 11 19ML (mm) 41.5 101.5 92.5ds (mm) 6 6 6Weight (g) 21 12 38Price $88 $67 $64

dds

L

MLD

Standard styli (ceramic)

Styli (general)Part number A-5555-0052 A-5555-0053 A-5555-0054 A-5555-0055 A-5555-0056 A-5555-0057 A-5555-0058 A-5555-0059Zeiss order number 602030-8060* 602030-8061* 602030-8062* 602030-8063* 602030-8064* 602030-8065* 602030-8066 602030-8067d (mm) 0.8 1 1.35 1.35 1.5 1.5 2 2L (mm) 32 32 32 44 32 44 32 44D (mm) 11 11 11 11 11 11 11 11ML (mm) 12 12 12 19 12 19 12 19ds (mm) 0.6 0.8 1 1 1 1 1.5 1.5B (mm) 20 20 20 25 20 25 20 25Weight (g) 4 4 4 4 4 4 4 5Price $62 $62 $52 $52 $50 $50 $50 $50

Part number A-5555-0060 A-5555-0061 A-5555-0062 A-5555-0063Zeiss order number 602030-8068 602030-8069 602030-8070 602030-8071d (mm) 2 2.5 2.5 2.5L (mm) 58 32 44 58D (mm) 11 11 11 11ML (mm) 33 12 19 33ds (mm) 1.5 1.5 1.5 1.5B (mm) 25 20 25 25Weight (g) 5 4 5 5Price $50 $50 $50 $50

dds

4L

MLBD

Fine styli

Part number A-5555-0064 A-5555-0065 A-5555-0066 A-5555-0067 A-5555-0068Zeiss order number 602030-9019* 602030-9020* 602030-9021 602030-9022 602030-9023d (mm) 1 1.5 2 2.5 3.5L (mm) 55 55 55 55 55D (mm) 11 11 11 11 11ML (mm) 4 5 5 5 10ds (mm) 0.7 1 1.5 2 2.5Weight (g) 12 11 11 11 11Price $67 $71 $71 $71 $71

ML

dds

D

L


* = drilled ball



C-C

ON, INC.

5-75

Sty

li an

d ac

cess

orie

s

Cube stars

Part number A-5555-0069 A-5555-0070 A-5555-0071 A-5555-0072 A-5555-0073Zeiss order number 602030-9024* 602030-9025* 602030-9026* 602030-9027* 602030-9028*d (mm) 1 1.5 2 2.5 3.5L (mm) 45 45 45 45 45ML (mm) 15 15 15 15 15ds (mm) 0.7 1.1 1.5 1.8 2.2Weight (g) 15 15 16 16 17Price $208 $208 $208 $208 $208

7

dds

ML

L

Styli for thread measurement

Part number A-5555-0074 A-5555-0075 A-5555-0076 A-5555-0077Zeiss order number 602030-9070* 602030-9071* 602030-9072* 602030-9073*d (mm) 1.35 2.3 1.8 0.8L (mm) 40 40 40 40D (mm) 11 11 11 11ML (mm) 9 12 10 5ds (mm) 1.05 1.84 1.44 0.6B (mm) 2 2.5 2 1.9Weight (g) 11 13 12 7Price $115 $108 $118 $176

Part number A-5555-0078 A-5555-0079 A-5555-0080 A-5555-0081 A-5555-0082 A-5555-0083Zeiss order number 600342-8200* 600342-8201* 600342-8202 600342-8203 600342-8221 600342-8222d (mm) 1.35 1.5 2 2.5 3 5L (mm) 32.9 33 33.5 34 34.5 43.5D (mm) 11 11 11 11 19 19ML (mm) 23.9 24 24.5 25 16.5 25.5ds (mm) 1 1 1.5 1.5 2 3.5Weight (g) 6 7 7 7 20 23Price $44 $42 $43 $44 $41 $46

ds

d

L

ML

D

12,5

For use with clamping disc only.

Also available with 5 mm thread length (instead of 12.5 mm).

B

d

ds

L

MLD

Styli for star styli and multi-styli mounting plates (tungsten carbide)


* = drilled ball



C-C

ON, INC.

5-76

Sty

li an

d ac

cess

orie

s


Part number A-5555-0084 A-5555-0085 A-5555-0086 A-5555-0087 A-5555-0088Zeiss order number 600342-8250 600342-8251 600342-8252 600342-8253* 600342-8254*d (mm) 0.3 0.5 0.6 0.8 1L (mm) 21.8 22 22.1 22.3 22.5D (mm) 11 11 11 11 11ML (mm) 12.8 13 13.1 13.3 13.5ds (mm) 0.2 0.3 0.4 0.6 0.8B (mm) 2.3 2.5 4.6 4.8 5Weight (g) 6 6 6 6 6Price $49 $47 $47 $45 $44

Styli for star styli and multi-styli mounting plates (tungsten carbide)

ds

d

L

ML

D

12,5

B

For use with clamping disc only.

Also available with 5 mm thread length (instead of 12.5 mm).

Part number A-5555-0089 A-5555-0090Zeiss order number 600341-0140 600341-0141D (mm) 11 19B (mm) 1.5 2Weight (g) 1 4Price $23 $26

Clamping discs for star styli B

D

Part number A-5555-0091 A-5555-0092Zeiss order number 600341-0150 600341-0151d (mm) 1/1.5 2/3.5D (mm) 11 19B (mm) 2 4Weight (g) 1 7Price $46 $49

Slot discs for star styliB

d

D

L

D

Mounting supports for star styli

Part number A-5555-0097 A-5555-0098Zeiss order number 600341-8300 600341-8301d (mm) 11 19L (mm) 50 85D (mm) 35 45Weight (g) 130 317Price $89 $108

d

D

L


Tungsten carbide pins for star styli

Part number A-5555-0093 A-5555-0094 A-5555-0095 A-5555-0096Zeiss order number 600341-0520 600341-0521 600341-0522 600341-0523L (mm) 10 10 18 18D (mm) 1 1.5 2 3.5Weight (g) 1 1 1 3Price $10 $10 $10 $10



C-C

ON, INC.

5-77

Sty

li an

d ac

cess

orie

s

Part number A-5555-0099 A-5555-0103Zeiss order number 602030-9095L (mm) 30 27D (mm) 18 18/11Weight (g) 43 35Price $115 $150

L

D

L

D

Rotational adjustment pieces

Holder for 1 mm – 1.5 mm diameter styli

Holders for 5 styli (maximum)

Styli for universal 3D probe head only (tungsten carbide)

Part number A-5555-0104Zeiss order number 600341-8160

d (mm) 1–1.5L (mm) 45D (mm) 11B (mm) 27.5Weight (g) 16Price $48

d

B

L

D

Part number A-5555-0105 A-5555-0106Zeiss order number 600341-8367 600341-8368d (mm) 1 1.5L (mm) 10 10D (mm) 11 11Weight (g) 3 3Price $44 $44

d

L

D

Part number A-5555-0107 A-5555-0108 A-5555-0109 A-5555-0110 A-5555-0111Zeiss order number 600341-8454* 600341-8450 600341-8451 600341-8452 600341-8453*d (mm) 1 0.3 0.5 0.6 0.8L (mm) 16 15.3 15.5 15.6 15.8D (mm) 1 1 1 1 1ML (mm) 5 2.3 2.5 4.6 4.8ds (mm) 0.8 0.2 0.3 0.4 0.6Weight (g) 1 1 1 1 1Price $40 $42 $40 $39 $37

D

d

L

ds

ML


* = drilled ball

The swivel piece is used to adjust the mounted probes (e.g. star styli) in X/Y.



C-C

ON, INC.

5-78

Sty

li an

d ac

cess

orie

s


Styli (tungsten carbide)

Part number A-5555-0112 A-5555-0113 A-5555-0114 A-5555-0115 A-5555-0116 A-5555-0117Zeiss order number 600341-8500* 600341-8501* 600341-8502 600341-8503 600341-8510 600341-8511d (mm) 1.35 1.5 2 2.5 3 5L (mm) 26.4 26.5 27 27.5 38 45D (mm) 1 1 1.5 1.5 2 3.5Weight (g) 1 1 1 1 2 6Price $36 $28 $28 $28 $28 $32

D d

L

Holder for swivel styli

Part number A-5555-0118Zeiss order number 600341-8180L (mm) 40D (mm) 11B (mm) 22Weight (g) 15Price $57 B

L

D

110o

Swivel styli (tungsten carbide)

Part number A-5555-0119 A-5555-0120Zeiss order number 600341-8183* 600341-8185d (mm) 1 2L (mm) 17.5 28.5D (mm) 1 1.5ML (mm) 5 22ds (mm) 0.8 1.5Weight (g) 1 1Price $53 $49

ML

ds

L

D d

Part number A-5555-0121 A-5555-0122 A-5555-0123 A-5555-0124 Steel Steel Ceramic CeramicZeiss order number 600341-8090 600341-8095 602030-8091 602030-8092d (mm) 10 15 20 15L (mm) 21.5 21.5 60 40D (mm) 7 10 7 7B (mm) 1.5 1.5 1 1Weight (g) 3 6 8 5Price $102 $103 $157 $167

Spherical disc styli

d

B

D

L


* = drilled ball



C-C

ON, INC.

5-79

Sty

li an

d ac

cess

orie

s

Extensions

Part number A-5555-0125 A-5555-0126 A-5555-0127 A-5555-0128 A-5555-0129 A-5555-0130 A-5555-0131 A-5555-0132 Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum AluminumZeiss order number 600341-8420 600341-8421 600341-8422 600341-8423 600341-8424 600341-8425 600341-8265 600341-8264ML (mm) 200 150 100 80 60 40 120 100D (mm) 20 20 20 20 20 20 11 11Weight (g) 85 68 50 43 37 32 30 24Price $84 $50 $67 $44 $44 $44 $29 $29

Part number A-5555-0133 A-5555-0134 A-5555-0135 A-5555-0136 A-5555-0137 A-5555-0138 A-5555-0139 A-5555-0140 Aluminum Aluminum Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steelZeiss order number 600341-8263 600341-8262 600341-8261 600341-0260 600341-0258 600341-0256 600341-0254 600341-0252L (mm) 80 60 40 100 80 60 40 20D (mm) 11 11 11 11 11 11 11 11Weight (g) 19 14 10 73 58 42 28 13Price $28 $26 $25 $29 $21 $21 $18 $32

Part number A-5555-0141 A-5555-0142 A-5555-0143 A-5555-0144 A-5555-0145 A-5555-0146 A-5555-0147 A-5555-0148 Stainless steel Stainless steel Titanium Titanium Titanium Titanium Titanium TitaniumZeiss order number 600341-0251 600341-0250 602030-9044 602030-9045 602030-9046 602030-9047 602030-9048 602030-9049L (mm) 15 10 10 15 20 25 25 40D (mm) 11 11 11 11 11 11 18 11Weight (g) 9 6 4 6 7 9 26 14Price $18 $32 $27 $24 $25 $25 $28 $26

Part number A-5555-0149 A-5555-0150 A-5555-0151 A-5555-0152 A-5555-0153 A-5555-0154 A-5555-0155 A-5555-0156 Titanium Titanium Titanium Titanium Titanium Titanium Titanium TitaniumZeiss order number 602030-9050 602030-9051 602030-9052 602030-9053 602030-9054 602030-9055 602030-9056 602030-9057L (mm) 40 50 50 60 60 75 75 80D (mm) 18 11 18 11 18 11 18 11Weight (g) 43 15 35 16 38 19 42 19Price $32 $38 $50 $40 $53 $41 $56 $44

Part number A-5555-0157 A-5555-0158 A-5555-0159 A-5555-0160 A-5555-0161 A-5555-0162 A-5555-0163 A-5555-0164 Titanium Titanium Titanium Titanium Titanium Titanium Titanium TitaniumZeiss order number 602030-9058 602030-9059 602030-9060 602030-9061 602030-9062 602030-9063 602030-9064 602030-9065L (mm) 80 90 90 100 100 120 120 150D (mm) 18 11 18 11 18 11 18 11Weight (g) 41 20 47 22 50 25 56 29Price $56 $44 $56 $44 $58 $49 $62 $52

Part number A-5555-0165 A-5555-0166 A-5555-0167 A-5555-0168 A-5555-0647 A-5555-0648 A-5555-0649 A-5555-0623 Titanium Titanium Titanium Titanium Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi berZeiss order number 602030-9066 602030-9067 602030-9068 602030-9069 602030-0263 602030-0264 602030-0262 602030-0265L (mm) 150 200 250 300 40 50 60 75D (mm) 18 18 18 18 11 11 11 11Weight (g) 68 81 102 114 8 9 9 10Price $65 $74 $77 $84 $135 $139 $141 $145



C-C

ON, INC.

5-80

Sty

li an

d ac

cess

orie

s


Part number A-5555-0650 A-5555-0651 A-5555-0652 A-5555-0425 A-5555-0424 A-5555-0653 A-5555-0654 A-5555-0655 Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi berZeiss order number 602030-0261 602030-0266 602030-0267 602030-0259 602030-0268 602030-0270 602030-0275 602030-0271L (mm) 80 90 100 120 150 160 200 210D (mm) 11 11 11 11 11 11 11 11Weight (g) 11 11 12 13 15 16 18 19Price $149 $153 $153 $164 $176 $185 $193 $212

Part number A-5555-0620 A-5555-0658 A-5555-0621 A-5555-0659 A-5555-0661 A-5555-0663 A-5555-0427 A-5555-0664 Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi ber Carbon fi berZeiss order number 602030-0295 602030-0294 602030-0293 602030-0292 602030-0291 602030-0290 602030-0274 602030-0269L (mm) 40 60 80 100 150 200 250 300D (mm) 21 21 21 21 21 21 21 21Weight (g) 39 42 45 48 55 62 69 77Price $141 $149 $156 $166 $185 $206 $227 $248

DD

L

Cubes

Part number A-5555-0189 A-5555-0190 A-5555-0191 A-5555-0192 A-5555-0193 Titanium Titanium Aluminum Aluminum TitaniumZeiss order number 600341-8361 600341-8002 602030-8363 602030-8362B (mm) 15 20 15 20 25Weight (g) 13 32 7.5 20 25Price $46 $52 $44 $54 $50

B

B

B

Part number A-5555-0194Zeiss order number 600342-8103Weight (g) 64Price $122

Double cube (titanium)

20

20

40

20

Schematics not shown to scaleExtensions (continued)



C-C

ON, INC.

5-81

Sty

li an

d ac

cess

orie

s

Stylus discs (hardened steel)

Thread styli (steel)

Star stylus

Part number A-5555-0195 A-5555-0196 A-5555-0197 A-5555-0198 A-5555-0199 A-5555-0200 A-5555-0201 A-5555-0202Zeiss order number 602030-0003 602030-0004 602030-0005 602030-0006 602030-0007 602030-0008 602030-0009 602030-0010d (mm) 4 4 4 4 5 5 5 3D (mm) 10 15 20 30 40 50 60 15B (mm) M5 M5 M5 M5 M5 M5 M5 8Weight (g) 2 5 9 21 42 64 89 4Price $84 $85 $85 $86 $88 $89 $90 $107

Part number A-5555-0203 A-5555-0204 A-5555-0205 A-5555-0206 A-5555-0207 A-5555-0208Zeiss order number 602030-0011 600341-0200 600341-0203 600341-0204 600341-0205 600341-0206d (mm) 4 2 3 4 5 6D (mm) 20 20 30 40 50 60B (mm) 8 8 8 8 8 8Weight (g) 8 4 10 21 36 59Price $85 $84 $86 $89 $93 $96

dB

D

Part number A-5555-0209 A-5555-0210 A-5555-0211 A-5555-0212 A-5555-0213 A-5555-0214Zeiss order number 602030-0012 602030-0013 600203-0014 602030-0015 602030-0016 600203-0017d M4 M5 M6 M8 M10 M12L (mm) 16 16 18 20 25 25D (mm) 10 10 12 15 18 20ML (mm) 10 10 12 12 15 15Weight (g) 4 4 7 13 25 33Price $49 $49 $49 $50 $50 $51

d

ML

D

L

Part number A-5555-0215Zeiss order number 600331-8093d (mm) 5L (mm) 80D (mm) 19ds (mm) 3.5Weight (g) 62Price $299

dsds d

L

55,5

98

28

D




C-C

ON, INC.

5-82

Sty

li an

d ac

cess

orie

s


Part number A-5555-0216Zeiss order number 600342-8051L (mm) 61D (mm) 11ML (mm) 39ds (mm) 3.5B 30°Weight (g) 12Price $48

Pointed stylus

ds

D

L

ML

B

R0,1

Part number A-5555-0217Zeiss order number 602030-0019L (mm) 120B (mm) 20Weight (g) 87Price $217

Cube extension

L

100

B

Part number A-5555-0218 A-5555-0219Zeiss order number 600342-9002 600342-9003L (mm) 30 36D (mm) 11 18Weight (g) 11 37Price $72 $72

Joints (titanium)

-90+ o

L

D

Multi-styli mounting plate (for Zeiss MT and Vast probe heads only)


20

20

140

Bolts for spherical disc and cube (stainless steel)

Part number A-5555-0221 A-5555-0222 A-5555-0223Zeiss order number 600341-0210 600341-0211 600341-0212L (mm) 35 30 17.3ML (mm) 26 21 10Weight (g) 9 9 7Price $13 $11 $10

13

5

L

ML

Bolts for cubes (stainless steel)Part number A-5555-0224 A-5555-0225Zeiss order number 600341-0220 600341-0221ML (mm) 26 21

Weight (g) 4 3Price $9 $9

5

ML




C-C

ON, INC.

5-83

Sty

li an

d ac

cess

orie

s

Adaptors for the assembly of M2, M3 and M5 styli to Zeiss measuring probe heads

Adaptors

Digitizer adaptors

Tools and accessories for the assembly of M2, M3 and M5 styli to Zeiss measuring probe heads

Stylus tool (M2 and M3 styli)

Allen keys DIN 911


Part number A-5555-0226 A-5555-0227 A-5555-0228 A-5555-0229 A-5555-0230Zeiss order number 602030-0215 602030-0315 602030-0318 602030-0316 602030-0317d M2 M3 M4 M2 M3L (mm) 10 10 10 10 10D (mm) 11 11 11 11 11ds M5 M5 M5 M4 M4Weight (g) 5 5 5 5 5Price $15 $15 $15 $15 $15

ds

d

D

L

Part number A-5555-0231 A-5555-0232Zeiss order number 602030-9113 602030-9115L (mm) 119 127D (mm) 15.81 9.52B M2 M2Weight (g) 126 87Price $212 $190

B

D

L

Part number A-5555-0233Zeiss order number 602030-0001d (mm) 1.2L (mm) 23Weight (g) 1Price $9

Part number A-5555-0234 A-5555-0235 A-5555-0236Zeiss order number 602030-0002 602030-0042 602030-0021B (mm) SW1.5 SW0.9 SW2.5Weight (g) 1 1 2Price $3 $3 $3



C-C

ON, INC.

5-84

Sty

li an

d ac

cess

orie

s


Tool kit

Stylus tool kit (2 x pin-type spanners 2.9 mm for M5)

Stylus tool 1.7 mm for M5

Assortment of screws

Spring-lock washers

C spanners DIN 1810

Part number A-5555-0237Zeiss order number 600341-8595Price $22

consisting of:

Part number A-5555-0328 A-5555-0327 A-5555-0326 A-5555-0333 A-5555-0325Description 1 x offset 1 x offset 1 x offset 2 x pin-type 1 x single- screwdriver screwdriver screwdriver spanner headed spanner DIN 911-2 DIN 911-3 DIN 911-4 2.9 mm DIN 894

d (mm) 2.9L (mm) 70D (mm) 5B SW1 SW3 SW4 SW13Weight (g) 1 5 10 15 39

Part number A-5555-0238Zeiss order number 600341-8596d (mm) 2.9L (mm) 70D (mm) 5Weight (g) 15Price $15

Part number A-5555-0239Zeiss order number 602030-0027d (mm) 1.7L (mm) 49D (mm) 2.5Weight (g) 1Price $9

Part number A-5555-0240Zeiss order number 602030-0222d (mm) 2.9L (mm) 70D (mm) 5Weight (g) 7.5Price $9

Pin-type spanner 2.9 mm for M5

Part number A-5555-0241Zeiss order number 600341-8590Weight (g) 27

Price $20

Includes:

10 spring-lock washers FS 5x7

2 cheese-head screws M5x12

2 cheese-head screws M5x20

4 grub screws 10 mm long

4 grub screws 25 mm long

Part number A-5555-0242Zeiss order number 600341-0042Price $5

Includes:

10 x FS 5.7 spring-lock washers

Part number A-5555-0243 A-5555-0244Zeiss order number 602030-0045 602030-0044d (mm) 21 11Price $10 $12



C-C

ON, INC.

5-85

Sty

li an

d ac

cess

orie

s



Price $245

69


Price $325 M5 M5

32,5

69

Part number A-5555-0322 A-5555-0251 A-5555-0252Zeiss order number 600660-8240 600660-8251 600660-8250Quantity in kit 1 2 10Weight each (g) 72 72 72

Price $260 $371 $2,803

12,5

44

Part number A-5555-0253 A-5555-0254Zeiss order number 620660-8251 620660-8250Quantity in kit 2 10Weight each (g) 67 67

Price $379 $1,890

M5

12,5

44

Adaptor plates for Zeiss probe heads

Adaptor plate (with disc and roller, but without cube)

Adaptor plate with rollers (titanium)

S-system adaptor plates with balls

Adaptor plates with rollers (Prismo)



C-C

ON, INC.

5-86

Sty

li an

d ac

cess

orie

s


Part number A-5555-0255 A-5555-0256 A-5555-0257Zeiss order number 600667-8570 600667-9611 600667-8572Quantity in kit 1 2 10Weight each (g) 158 158 158Price $295 $570 $2,720

Adaptor plates for Zeiss MT/Vast with ID chip

2940,5

22

69


Part number A-5555-0258 A-5555-0259 A-5555-0260Zeiss order number 600667-8571 600667-8574 600667-8575Quantity in kit 1 2 10Weight each (g) 130 130 130

Price $270 $855 $2,510

69

Adaptor elements for Zeiss RST probe systems with M2/M3 connecting thread

M3 styli

Part number A-5555-0261 A-5555-0262 A-5555-0263 A-5555-0264 A-5555-0265 A-5555-0266 A-5555-0267 A-5555-0268 Tungsten Tungsten Tungsten Ceramic Tungsten Ceramic Tungsten Tungsten carbide carbide carbide carbide carbide carbide

Zeiss order number 602030-8104* 602030-8103 602030-8113* 602030-8102* 602030-8112 602030-8101* 602030-8115 602030-8116d (mm) 2 3 3 4 4 5 0.5 0.6L (mm) 22 40 40 32 32 32 22 22D (mm) 4 5.5 5.5 4 4 4 4 4ML (mm) 9 21.5 21.5 26 26 19 9 9ds (mm) 1 2 2 2 2 2 0.3 0.4Weight (g) 1 4 4 1 1 1 1 1Price $31 $29 $29 $29 $29 $29 $40 $38

Part number A-5555-0269 A-5555-0270 A-5555-0271 A-5555-0272 A-5555-0273 A-5555-0274 A-5555-0275 A-5555-0276 Tungsten Tungsten Tungsten Tungsten Tungsten Tungsten Ceramic Tungsten carbide carbide carbide carbide carbide carbide carbide

Zeiss order number 602030-8117* 602030-8118 602030-8119 602030-8120 602030-8121 602030-8023* 602030-8020* 602030-8021*d (mm) 0.8 1 1.5 1 0.3 2 6 3L (mm) 22 22 22 10.5 22 21 13 21.5D (mm) 4 4 4 4 4 4 4 4ML (mm) 9 9 9 5.5 9 15 9 15.5ds (mm) 0.6 0.8 1 0.8 0.2 1 2 1.5Weight (g) 1 1 1 1 1 1 1 1Price $37 $32 $29 $31 $51 $29 $30 $29

D d

ds

ML

L

D d

ds1mm

ML

L

Part number A-5555-0277 Tungsten carbide

Zeiss order number 602030-8106d (mm) 3L (mm) 21D (mm) 4ML (mm) 13ds (mm) 2Weight (g) 1Price $31

Stylus ball diameter > 1 mm Stylus ball diameter < 1 mm



C-C

ON, INC.

5-87

Sty

li an

d ac

cess

orie

s

M2 styli

M3 extensions (stainless steel)

M2 extensions (stainless steel)

Star styli (stainless steel)

Part number A-5555-0278 A-5555-0279 A-5003-0938 A-5003-3822 A-5555-0282 A-5555-0283 Ceramic Ceramic Tungsten Tungsten Tungsten Tungsten carbide carbide carbide carbide

Zeiss order number 602030-8002* 602030-8004* 602030-8003* 602030-8005* 602030-8001* 602030-8034*d (mm) 6 5 3 2 2 5L (mm) 13 22.5 21.5 21 11 22.5D (mm) 3 3 3 3 3 3ML (mm) 9 16.5 15.5 15 5 16.5ds (mm) 2 2 1.5 1 1 2Weight (g) 1 1 1 1 1 1Price $29 $48 $78 $72 $30 $32


Part number M-5000-7633 M-5000-3592 A-5555-0286 A-5555-0287 A-5555-0288Zeiss order number 602030-8301 602030-8302 602030-8303 602030-8304 602030-8305L (mm) 10 20 30 40 50D (mm) 4 4 4 4 4Weight (g) 1 1 2 3 4Price $12 $12 $10 $14 $18

Part number M-5000-7634 M-5000-3647 M-5000-3648 M-5000-4162 M-5000-7779Zeiss order number 602030-8321 602030-8322 602030-8323 602030-8324 602030-8325L (mm) 5 10 20 30 40D (mm) 3 3 3 3 3Weight (g) 1 1 1 1 2Price $11 $13 $13 $13 $18

DL

DL

Part number A-5555-0294 A-5555-0295Zeiss order number 602030-8011 602030-8010d (mm) 2 2L (mm) 32 22ML (mm) 13.2 8.2ds (mm) 1.4 1.4B (mm) 2 H7 2 H7

Weight (g) 1 1Price $86 $84

d

ds

B

L

ML

D d

ds

L

ML



C-C

ON, INC.

5-88

Sty

li an

d ac

cess

orie

s


Part number A-5555-0296Zeiss order number 602030-8012d (mm) 2L (mm) 19.5D (mm) 3ML (mm) 13.5ds (mm) 1.5Weight (g) 1Price $30

M2 stylus for star styli (stainless steel)

Disc styli

Swivel adaptors

5-way stylus centers

D d

ds

L

ML

Schematics not shown to scale.

Part number A-5555-0297 A-5555-0298Zeiss order number 602030-8201 602030-8202d (mm) 8 4L (mm) 32 32D (mm) 3 3ML (mm) 19 19ds (mm) 1.5 1B (mm) 1.5 1Weight (g) 1 1Price $74 $64

D

d

ds B

L

ML

Part number A-5555-0299 A-5555-0300Zeiss order number 602030-8203 602030-8204d (mm) 14 20L (mm) 5 5B (mm) 2 2.5Weight (g) 1 3Price $60 $112

d

B

L

Part number A-5000-7616 A-5000-7534Zeiss order number 602030-9102 602030-9101L (mm) 12 8D M3 M2B (mm) 6 4.5Weight (g) 3 1Price $59 $59

D

D

B

L

Part number A-5555-0303 A-5000-3627Zeiss order number 602030-8382 602030-8381d M3 M2L (mm) 12 7B (mm) 11.5 7.5Weight (g) 4 1Price $40 $43

d d

L

B



C-C

ON, INC.

5-89

Sty

li an

d ac

cess

orie

s

Stylus adaptor (M3-M2/M2-M3)

Stylus fi xing for RST probe head

M2 styli

Part number M-5000-4163 A-5555-0306Zeiss order number 602030-8341 602030-8345L (mm) 5 5D M2 M3ds M3 M2Weight (g) 1 1Price $12 $10 ds D

L


Part number A-5555-0308 A-5555-0309 A-5555-0310 A-5555-0311 A-5555-0312 A-5555-0313 Tungsten Tungsten Tungsten Tungsten Tungsten Tungsten carbide carbide carbide carbide carbide carbide

Zeiss order number 602030-8006* 602030-8007* 600203-8008* 602030-8009* 602030-8015* 600203-8016*d (mm) 1 1 2 2 4 4L (mm) 10.5 15.5 11 16 12 22D (mm) 3 3 3 3 3 3ML (mm) 6.5 11.5 7 12 8 18ds (mm) 0.8 0.8 1 1 2.4 2.4Weight (g) 1 1 1 1 1 1Price $26 $36 $18 $21 $22 $28

D

ds d

ML

L

Part number A-5555-0314 A-5555-0315 A-5555-0316Zeiss order number 602030-8017* 602030-8018* 602030-8019*d (mm) 6 6 8L (mm) 13 28 13D (mm) 3 3 3Weight (g) 1 2 2Price $28 $28 $44

D

L

d


* = drilled ball



C-C

ON, INC.

5-90

Sty

li an

d ac

cess

orie

s

M2 pointed styli

Part number A-5555-0317 A-5555-0318Zeiss order number 602030-8342 602030-8343L (mm) 10 10D (mm) 3 3

ds (mm) 1.5 1.5B 30° 60°Weight (g) 1 1Price $26 $28 D

B

ds

L


Part number A-5555-0319Zeiss order number 602030-9104L (mm) 9.1D (mm) 10.5B M2Weight (g) 4Price $49

5-way stylus center for M2 styli (large)

B

L

D

5-way stylus center for M2 styli (small)

Part number A-5555-0320Zeiss order number 602030-9103L (mm) 5.4D (mm) 7B M2Weight (g) 1Price $29

BL

D

M2 joint

Part number A-5000-9902Zeiss order number 602030-9105L (mm) 16.4D (mm) 4B M2Weight (g) 2Price $70

B

L D




C-C

ON, INC.

Repair services

Section 6

Repairs issue 15.indd 6-1Repairs issue 15.indd 6-1 30/07/2008 11:24:2030/07/2008 11:24:20


C-C

ON, INC.

Repair services

6-2

Rep

air

serv

ices

Renishaw repair services

Services offeredRepair

Your product is repaired to factory performance specifi cations,

and carries a 3-month warranty.

Repair By Exchange (RBE)

Your product is replaced by a refurbished or as new product,

shipped to you once we have received your failed product.

RBEs carry a 6-month warranty.

Advance RBE

Your product is replaced by a refurbished or as new product,

shipped to you on the same day that you report a fault. Advance

RBEs carry a 6-month warranty.

Replace new

Your product is replaced by a new product, carrying a new

factory warranty.

Please note:

The services offered on each product vary – please consult the

detailed list that follows.

On Advance RBE, in order to get you a replacement product as

soon as possible, it is necessary to charge a small additional

premium on top of the price of the product to cover additional

administration.

Available repair services for Specials are quoted per job.

All the following prices are for guidance only. When units are

received with excessive wear and tear, or obsolete product

is returned for repair, Renishaw reserves the right to quote a

different service/replacement charge.

Advance replacementsAdvance replacement is a Renishaw premium service aimed

at minimizing your downtime. This service is only available on

products where a Repair By Exchange (RBE) service is offered.

Through this service we ship an RBE in advance of receipt of

your inoperative product.

Please note:

1) A $75 charge applies to each advance replacement.

2) Your inoperative product must be returned to Renishaw

within 14 working days of receipt of the advance

replacement.

3) Failure to do so will result in an issuance of a non-return

invoice in the amount of the difference between the RBE

price and the new list price.

4) Return of your inoperative product after the issuance of the

non-return invoice will not result in a credit of the non-return

invoice, and your inoperative product will be returned to

you.

5) Advance replacements sent out under a warranty claim will

not be credited if the returned product is damaged, or no

fault is found with the returned product.

6) Returns of advance replacements will be accepted if:

a) they are returned unused, and in the original

packaging within ten working days of invoice date, and

b) the return has been pre-approved by Renishaw

through the issuance of a Return Goods Authorization

(RGA) number, and

c) the return passes Renishaw inspection, and

d) a 10% re-stocking fee is applied.



C-C

ON, INC.

6-3

Rep

air

serv

ices

Coordinate Measuring Machine products

Manual probe heads

Description Check and test Repair Repair by exchange RBE part number

MH20 $90 N/A $990 A-4043-0024-RBE

MH20i $90 N/A $1,260 A-4099-0022-RBE

MH8 $90 N/A $685 A-1332-0002-RBE

MIH $200 $855 $1,785 A-1070-0003-RBE

PH1 $90 N/A $495 A-1049-1795-RBE

PH5 $90 N/A N/A Replace at new list price

PH6 $90 N/A N/A Replace at new list price

Motorized probe heads

Description Recertifi cation Calibration Minor repair Major repair Repair by exchange RBE part number

PH9 $430 $2,395

PH10M $430 $535 $990 $2,120 $4,630 A-1025-0050-RBE

PH10MQ $430 $535 $990 $2,120 $4,630 A-1036-0001-RBE

PH10MQH $430 $535 $990 $2,120 $4,630 A-1036-0100-RBE

PH10T $430 $535 $990 $2,120 $4,630 A-1025-1520-RBE

Description Check and test Level 1 repair Level 2 repair Repair by exchange RBE part number

PHS $555 $3,515 $7,135 $13,385 A-2150-0815-RBE

Controllers

Description Calibration Repair Repair by exchange RBE part number

ACC2 (upgrade to ACC2-2) N/A N/A $1,005 (RS232 only) A-1520-0101-RBE

ACC2-2 $250 $720 $1,005 (RS232 only) A-1520-0101-RBE

PHC10 (upgrade to PHC10-2) N/A N/A $1,005 (RS232 only) A-1368-0100-RBE

PHC10-2 $250 $720 $1,005 (RS232 only) A-1368-0100-RBE

ProbesDescription Price

Probe recertifi cation (check and test) $90

Description Repair Repair by exchange RBE part number

SP25M probe body N/A $1,520 A-2237-1000-RBE

SM25-1 module N/A $1,080 A-2237-1111-RBE

SM25-2 module N/A $1,080 A-2237-1112-RBE

SM25-3 module N/A $1,080 A-2237-1113-RBE

SM25-4 module N/A $1,185 A-2237-1114-RBE

TM25-20 module N/A $620 A-2237-1200-RBE

SP600 N/A $3,730 A-2098-0104-RBE

TP1S N/A $835 A-1041-7540-RBE

TP1SM N/A $835 A-1041-7541-RBE

TP2-5W* N/A $840 A-1042-1890-RBE

* You can order TP20 upgrades for the same price as a TP2 RBE:

TP20 with 1 module $840

TP20 with 2 modules $1,281

TP20 with 3 modules $1,876

Call for details.



C-C

ON, INC.

Repair services

6-4

Rep

air

serv

ices

Probes continuedDescription Repair Repair by exchange RBE part number

TP6 N/A $835 A-1039-0001-RBE

TP6A N/A $835 A-1039-0028-RBE

TP7M N/A $1,165 A-1073-0121-RBE

TPES N/A $660 A-1311-0033-RBE

TP20 standard force probe module only N/A $810 A-1371-0270-RBE

TP20 medium force probe module only N/A $810 A-1371-0271-RBE

TP20 extended force probe module only N/A $810 A-1371-0272-RBE

TP20 6-way probe module only N/A $900 A-1371-0419-RBE

EM1 TP20 extension module N/A $900 A-1371-0430-RBE

EM2 TP20 extension module N/A $900 A-1371-0431-RBE

TP20 body only N/A $535 A-1371-0275-RBE

TP200 stylus module N/A N/A Replace at new list price

TP200 probe sensor N/A $995 A-1207-0020-RBE

TP200B probe sensor N/A $995 A-1207-0046-RBE

Description Check and test Minor repair Major repair Repair by exchange RBE part number

SP80 $130 $1,695 $2,750 $4,580 A-2238-0101-RBE

SP80H $130 $1,695 $2,750 $4,580 A-2238-0414-RBE

InterfacesDescription Repair Repair by exchange RBE part number

Pl4 N/A N/A Replace at new list price

PI4-2 N/A N/A Replace at new list price

PI7 (upgrade to PI7-2) N/A $695 N/A

PI7-2 $695 N/A N/A

PI200 N/A N/A Replace at new list price

Machine checking gageDescription Calibration

Small checking gage set (includes arms, pivot and stylus. Excludes needed replacement items) $400

Large checking gage set (includes arms, pivot and stylus. Excludes needed replacement items) $450

Changing systemsDescription Calibration Minor repair Major repair Repair by exchange RBE part number

ACR1 $405 $825 $1,755 $4,570 A-1051-1300-RBE

ACR3 N/A $365 (port replacement only) $1,095 $2,650 A-5036-0005-RBE

FCR25 N/A $325 (port replacement only) N/A $625 A-2237-1401-RBE

(for use with MRS)

FCR25-L3 N/A $325 (port replacement only) N/A $940 A-2237-1403-RBE

MCR20 N/A $395 (port replacement only) N/A $990 A-1371-0163-RBE

SCR600 N/A $715 (port replacement only) N/A $1,865 A-2098-0724-RBE

SCR200 N/A $1,045 N/A $1,865 A-1085-0370-RBE



C-C

ON, INC.

6-5

Rep

air

serv

ices

Machine Tool products

Inspection probes for machining centers

Description Price

Recertifi cation (check and test) $90


CP1 probe N/A $590 A-2012-0007-RBE

MP1/R probe N/A $705 A-2051-4577-RBE

MP1/S probe N/A $705 A-2051-4576-RBE

MP3 probe N/A $705 A-2053-5358-RBE

MP3 wide angle OMP short arm N/A $955 A-2033-1165-RBE

MP3 wide angle OMP long arm N/A $955 A-2033-1166-RBE

MP3 360° OMP N/A $810 A-2103-0008-RBE

MP7/MP8/MP9/MP10 probe module N/A $705 A-2033-0704-RBE

MP7 OMP 35° N/A $590 A-2033-0946-RBE

MP7 OMP 70° N/A $590 A-2033-0947-RBE

MP8 OMP 35° N/A $590 A-2033-0861-RBE

MP8 OMP 70° N/A $590 A-2033-0862-RBE

MP9 OMP 35° N/A $590 A-2034-0037-RBE

MP9 OMP 70° N/A $590 A-2034-0038-RBE

MP10 OMP 35° N/A $590 A-2085-0075-RBE

MP10 OMP 70° N/A $590 A-2085-0076-RBE

MP11 probe N/A $705 A-2045-0003-RBE

MP12 probe N/A $995 A-2075-0009-RBE

MP16 (RMP2) $910 N/A N/A

MP15 N/A $795 A-2116-0621-RBE

MP15F N/A $795 A-2116-0685-RBE

MP700 probe module N/A $910 A-2108-0001-RBE

MP700 OMP 35° N/A $685 A-2107-0036-RBE

MP700 OMP 70° N/A $685 A-2107-0071-RBE

OMP40 N/A $985 A-4071-0001-RBE

OMP400 N/A $1,395 A-5069-0001-RBE

OMP60 N/A $1,090 A-4038-0001-RBE

RMP60 N/A $1,455 A-4113-0001-RBE

RMP600 N/A $1,750 A-5312-0001-RBE

OMP60M/RMP60M probe module N/A $820 A-4038-1002-RBE

OMP60M transmission module N/A $680 A-4038-1003-RBE

RMP60M transmission module N/A $870 A-4113-1003-RBE



C-C

ON, INC.

Repair services

6-6

Rep

air

serv

ices

Tool setting probes for machining centers

MP4


Probe only N/A $705 A-2054-6473-RBE

Rear exit base and N/A $545 A-2054-6474-RBE

adjustment module

Side exit base and N/A $545 A-2054-6476-RBE

adjustment module

MP6


Probe only N/A $705 A-2053-5358-RBE

MP6 base only N/A N/A Replace at new list price

TS27R

Description Rewire Repair by exchange RBE part number

TS27R $180 $805 A-2008-0368-RBE

NC1


F150/40 N/A $1,910 A-2253-8524-RBE

F200/90 N/A $1,910 A-2253-8525-RBE

F300/190 N/A $1,910 A-2253-8526-RBE

S700 (500-700 mm) N/A $1,910 A-2253-8541-RBE

S1000 (700-1000 mm) N/A $1,910 A-2253-8542-RBE

S1400 (1000-1400 mm) N/A $1,910 A-2253-8543-RBE

S2000 (1400-2000 mm) N/A $1,910 A-2253-8544-RBE

NC2


NC2 N/A $995 A-5132-1500-RBE

NC3


NC3 N/A $1,450 A-4179-1500-RBE

NC4


NC4 generic TX N/A $950 A-4114-5200-RBE

NC4 generic RX N/A $950 A-4114-5300-RBE

NC4 fi xed system N/A Call Renishaw for details

NCPCB


NCPCB N/A N/A Replace at new list price

OTS


OTS N/A $900 A-5401-2001-RBE

TRS2


TRS2 N/A $610 A-5450-0400-RBE(TRS2)



C-C

ON, INC.

6-7

Rep

air

serv

ices

Inspection probes for turning centers


LP2 probe N/A $715 A-2063-6098-RBE

LP2DD probe N/A $715 A-2063-8020-RBE

LP2H probe N/A $715 A-2064-0002-RBE

LTO2 N/A $715 A-2030-0121-RBE

LTO2S N/A $715 A-2030-0183-RBE

LTO2T (25 mm shank) N/A $715 A-2030-0218-RBE

LTO2T (1 in shank) N/A $715 A-2030-0274-RBE

LTO3T (25 mm shank) N/A $715 A-2030-0330-RBE

LTO3T (1 in shank) N/A $715 A-2030-0334-RBE

Tool setting arms


HPMA (hub and arm only) (standards) N/A $1,180 Please call Renishaw Service Center

HPPA (hub and arm only) (standards) N/A $960 Please call Renishaw Service Center

HPRA (hub and arm only) (standards) N/A $705 Please call Renishaw Service Center

TSA (hub only) N/A $1,710 A-2116-0200-RBE(REAR EXIT)

TSA (hub only) N/A $1,710 A-2116-0201-RBE(SIDE EXIT)

Tool setting probes for turning centers


RP1 probe N/A $685 A-2154-0007-RBE

RP2 probe N/A $685 A-2116-0149-RBE

RP3 probe N/A $685 A-2197-0049-RBE

TS20 probe N/A N/A Replace at new list price

Scanning probes


SP2 N/A $2,025 A-1061-0613-RS

SP2-1 N/A $2,025 A-1068-0005-RS

SP2-1 with Z-lock N/A $2,295 A-1068-0095-RS

SP2-1 rear exit N/A $2,025 A-1068-0002-RBE

Procera® Piccolo Please call Renishaw Service Center $2,310 A-4129-0003-RBE

Procera® Forte Please call Renishaw Service Center $6,138 A-5288-0001-RBE

Interfaces, receivers and inductive systems


MI5 N/A N/A Replace at new list price

MI8 N/A N/A Replace at new list price

MI12 N/A $695 A-2075-0142-RBE

NCi interface N/A N/A Replace at new list price

SSR converter board N/A N/A Replace at new list price

TSi interface N/A N/A Replace at new list price

OMI N/A $865 A-2115-0001-RBE

OMI-2 N/A $760 A-5191-0050-RBE

OM1-2T N/A $760 A-5439-0050-RBE

OMM N/A $605 A-2033-0576-RBE

IMM (inductive module machine) N/A N/A Replace at new list price

IMP (inductive module probe) assembly N/A N/A Replace at new list price

RMI N/A $895 A-4113-0050-RBE



C-C

ON, INC.

Repair services

6-8

Rep

air

serv

ices

Calibration systemsRenishaw recommends the following calibration frequencies: ML10/ML10X Every 2-3 years

EC10 Every 12 months

Ballbar Every 12 months

Repair pricesDescription Repair Repair by exchange RBE part number

ML10 (less than seven years old) $1,870 N/A N/A

ML10 (more than seven years old) $2,560 N/A N/A

ML10 (more than ten years old) $3,240 N/A N/A

EC10 $1,870 N/A N/A

Ballbar (mechanical assembly only) N/A $2,205 A-8014-0286-RBE

RX10 (less than seven years old) $2,160 N/A N/A

RX10 (more than seven years old) $3,240 N/A N/A

RX10 (more than ten years old) $5,220 N/A N/A

Calibration prices Standard calibration Express calibration

ML10/ML10X $850 $1,015

EC10 $850 $1,015

Ballbar $650 $760

Zerodur 50 mm $440 $505

RX10 $1,395 N/A

Replacement partsDescription Part number Price

ACR1 short port replacement kit A-5036-0049 $255

ACR1 long port replacement kit A-1051-7077 $245

ACR1 mixed port replacement kit A-1051-7076 $245

MP8 shank switch assembly A-2033-0755 $115

MP1/MP4/MP7/MP8/MP9/MP10 probe outer diaphragm replacement kit A-2051-7105 $95

MP3/MP6 probe outer diaphragm kit A-2053-8156 $95

LP2 service kit A-2063-7542 $70

LP2DD service kit A-2063-8023 $160

Ballbar center cup assembly A-8014-0522 $140

Ballbar center ball assembly A-8014-0141 $140

Ballbar magnetic tool cup A-8014-0521 $125

Ballbar ball and mount assembly A-8014-0182 $140

Ballbar cleaning kit A-8014-0423 $25

PH1 threaded rod end M-1049-1328 $15

MP1/S probe rear seal M-2051-4522 $10

MP1/R probe rear seal M-2051-6148 $10

MP7/MP8/MP9/MP10/MP700 battery cap seal M-2107-0115 $20

MP7/MP8/MP9/MP10/MP700 battery cap screw P-SC08-0335 $1

OMP40 pull-up cone assembly A-4071-0094 $35

OMP40 round battery cap seal M-4071-0119 $9

OMP40 round battery cap A-4071-0096 $93

OMP40 rectangular battery cassette A-4071-1166 $120

OMP40/OMP60/RMP60 battery cassette seal A-4038-0301 $73

OMP60/RMP60 battery cassette A-4038-0300 $175

OMP60/RMP60 outer diaphragm kit A-4038-0302 $68

OMP60/RMP60 shank switch bobbin A-4038-0303 $165

A “standard” calibration will take a maximum of fi ve

working days and an “express” calibration will take a

maximum of two working days. Express calibrations

must be scheduled by calling the Renishaw Service

Center at: 847/286-9953 extension 806.

Traceable calibration certifi cates will be issued at the time of calibration

and enclosed with the returned units.

Ballbar calibration includes ballbar and zerodur calibration, and

replacement of ball and mount assembly, center cup assembly, center ball

assembly, and tool cup assembly. A new cleaning kit will also be supplied.



C-C

ON, INC.

7-1

Alp

ha-n

umer

ic p

rice

list

Part number Description Price Page number

A-1004-0110 PL15 cable $68 1-37A-1007-0006 MCG kit (small) $3,229 3-21A-1007-0007 MCG arm (101 mm) $590 3-21A-1007-0008 MCG arm (151 mm) $617 3-21A-1007-0009 MCG arm (226 mm) $645 3-21A-1007-0010 MCG arm (380 mm) $678 3-21A-1007-0011 MCG arm (532 mm) $721 3-21A-1007-0012 MCG arm (685 mm) $777 3-21A-1007-0017 MCG pivot $300 3-21A-1007-0018 MCG additional weights $8 3-21A-1007-0056 MCG kit (large) $4,050 3-21A-1007-0058 MCG arm (76 mm) $812 3-21A-1007-0061 MCG baseplate $273 3-21A-1009-0209 RPM01 interface module $383 1-41A-1014-1720 PK1 knuckle joint $604 1-39A-1015-7650 SB2 mahogany box $122 5-59, 5-60A-1015-7658 SB3 mahogany box $122 5-56A-1015-7674 Probe head box $198 1-50A-1015-7686 Probe head box $136 1-50A-1015-7694 Extension bar box $113 1-50A-1015-7698 Probe head box $108 1-50A-1015-7725 Probe head box $100 1-50A-1015-7727 Probe head box $100 1-50A-1015-7731 Probe head box $100 1-50A-1015-7749 Mahogany box $125 5-57, 5-58A-1015-7761 Extension bar box $131 1-50A-1015-7765 Probe head box $113 1-50A-1015-7869 Probe head box $135 1-50A-1016-0001 PL4(T) cable $97 1-37A-1016-0003 PL14 cable $108 1-37A-1016-0004 PL1(T) cable $97 1-37A-1016-0006 PL2(T) cable $97 1-37A-1016-0012 PL3(T) cable $97 1-37A-1016-0120 PL25(T) cable $151 1-38A-1016-0121 PL24 cable $151 1-38A-1016-6370 PL27(T) cable $57 1-37A-1016-6440 PL27(T) cable $57 1-37A-1016-7129 PL156 cable $99 1-31A-1016-7132 PL157 cable $119 1-31A-1016-7133 PL158 cable $252 1-31A-1016-7563 PLM7(T) cable $156 1-37A-1016-7564 PLM6(T) cable $156 1-37A-1016-7624 PL42V cable $690 1-37A-1016-7625 PL38V cable $859 1-37A-1016-7626 PL56V cable $622 1-37A-1016-7627 PL44V cable $554 1-37A-1016-7628 PL46V cable $441 1-37A-1016-7629 PL45V cable $373 1-37A-1016-7630 PL63S cable (5 m) $104 1-24A-1016-7631 PL64S cable (10 m) $119 1-24A-1016-7632 PL65S cable (20 m) $156 1-24A-1016-7634 PL70(V) cable $362 1-38A-1016-7637 PL72 cable $151 1-38A-1016-7643 PL76(S) cable $171 1-38A-1016-7644 PL75V cable $171 1-37A-1016-7660 PL97(S) cable $226 1-38A-1016-7672 PL5(U) cable $271 1-37A-1016-7673 PL6(U) cable $271 1-37A-1016-7674 PL12(U) cable $238 1-37A-1016-7675 PL13(U) cable $238 1-37A-1016-7676 PL93(U) cable $271 1-37A-1016-7677 PLM8(U) cable $156 1-37A-1016-7678 PLM9(U) cable $156 1-37A-1018-0123 Blanking panel kit $30 1-43A-1018-0124 Rack mount bracket kit $23 1-43A-1018-0125 Enclosure link bracket kit $23 1-43A-1018-0126 Enclosure link bracket kit $23 1-43A-1023-7024 PL17(T) cable $243 1-37A-1023-7025 PL18(T) cable $243 1-37A-1023-7056 PL33(U) cable $311 1-37

Price list Issue 15.indd 7-1Price list Issue 15.indd 7-1 30/07/2008 11:26:0330/07/2008 11:26:03


C-C

ON, INC.

Alpha-numeric price list


7-2

Alp

ha-n

umer

ic p

rice

list

A-1025-0050-RBE PH10M head RBE $4,630 6-3A-1025-0050 PH10M head $21,881 1-9A-1025-1520-RBE PH10T head RBE $4,630 6-3A-1025-1520 PH10T head $19,293 1-9A-1026-0320 AM1 adjustment module $780 1-10A-1029-0111 PL10 cable $85 1-38A-1029-0166 PL7 cable $57 1-37A-1029-0182 PL9 cable $57 1-38A-1033-0001 PI6 interface $264 1-40A-1034-0002 Datum ball (25 mm) $282 1-49A-1034-0005 Datum ball (12 mm) $282 1-49A-1034-0023 Datum ball (19 mm) $282 1-49A-1034-0026 Datum sphere kit (25 mm ball) $492 1-49A-1034-0027 Datum sphere kit (19 mm ball) $492 1-49A-1034-0028 Datum sphere kit (12 mm ball) $492 1-49A-1034-0031 Datum sphere kit (3/4 in ball) $492 1-49A-1034-0032 Datum ball (3/4 in) $282 1-49A-1034-0035 Datum sphere kit (1 in ball) $492 1-49A-1034-0036 Datum ball (1 in) $282 1-49A-1036-0001-RBE PH10MQ head RBE $4,630 6-3A-1036-0001 PH10MQ head $21,881 1-9A-1036-0080 AM2 adjustment module $780 1-10A-1036-0100-RBE PH10MQH head RBE $4,630 6-3A-1039-0001-RBE TP6 probe RBE $835 6-4A-1039-0001 TP6 probe $3,522 1-20A-1039-0028-RBE TP6A probe RBE $835 6-4A-1039-0028 TP6A probe $3,641 1-20A-1039-0041 TK7 tool kit $28 1-52A-1041-7041 TK4 tool kit $24 1-52A-1041-7113 CMM probe shank $215 1-34A-1041-7114 CMM probe shank $151 1-34A-1041-7540-RBE TP1S probe RBE $835 6-3A-1041-7540 TP1S probe $3,316 1-14A-1041-7541-RBE TP1SM probe RBE $835 6-3A-1041-7541 TP1SM probe $3,316 1-14A-1041-7569 M3/Ø4.5 stylus adaptor $17 5-59, 5-60A-1042-1486 C spanner $19 1-51, 3-20A-1042-1890-RBE TP2 5-way probe RBE $840 6-3A-1042-1890 TP2 5-way probe $3,641 1-20A-1042-7030 TK5 tool kit $62 1-52A-1042-7031 TK6 tool kit $7 1-52A-1045-1883 PH5 head $1,899 1-2A-1045-1893 Overtravel unit for PH5/1 $433 1-2A-1046-5094 PH6 head (PL4 cable) $477 1-3A-1046-5096 PH6 head (PL14 cable) $477 1-3A-1046-5097 PH6 head (PL1 cable) $477 1-3A-1046-5098 PH6 head (PL2 cable) $477 1-3A-1046-5099 PH6 head (PL3 cable) $477 1-3A-1047-3484 PEL1 extension bar $284 1-39, 1-50A-1047-3485 PEL2 extension bar $346 1-39, 1-50A-1047-3486 PEL3 extension bar $363 1-39, 1-50A-1047-3487 PEL4 extension bar $458 1-39A-1047-3932 S9 double-ended spanner $14 1-50, 1-51A-1047-7005 Probe extension kit EKL $994 1-50A-1047-7064 PECF2 extension bar $616 1-39A-1047-7065 PECF1 extension bar $571 1-39A-1047-7066 PECF3 extension bar $683 1-39A-1049-1795-RBE PH1 head RBE $495 6-3A-1049-1795 PH1 head $1,764 1-2A-1051-0012 PH6A head $718 1-3A-1051-0040 S10 joint key $17 1-50, 1-51A-1051-0045 PL20 10 m cable $352 1-45A-1051-0102 PL21 15 m cable $461 1-45A-1051-0199 PL19 5 m cable $212 1-45A-1051-0394 PAACF autojoint extension bar $1,713 1-39A-1051-0417 PAA1 autojoint extension bar $353 1-39A-1051-0418 PAA2 autojoint extension bar $451 1-39A-1051-0419 PAA3 autojoint extension bar $548 1-39A-1051-0440 ACR1 adjustable rack base $315 1-45A-1051-0441 ACR1 horizontal mounting kit $368 1-44



C-C

ON, INC.

7-3

Alp

ha-n

umer

ic p

rice

list


A-1051-0443 PEMCF2 autojoint extension bar $1,210 1-39A-1051-0488 PAACF2 autojoint extension bar $981 1-39A-1051-0490 PEMCF1 autojoint extension bar $765 1-39A-1051-0491 PEMCF3 autojoint extension bar $1,438 1-39A-1051-0493 PAACF3 autojoint extension bar $1,029 1-39A-1051-0513 PAACF autojoint extension bar $1,644 1-39A-1051-1132 PEMCF autojoint extension bar $1,375 1-39A-1051-1300-RBE ACR1 autochange rack RBE $4,570 6-4A-1051-1300 ACR1 autochange rack $19,027 1-44A-1051-1308 ACR1 vertical mounting kit $87 1-44A-1051-7076 ACR1 mixed port replacement kit $245 1-45, 6-8A-1051-7077 ACR1 long port replacement kit $245 1-45, 6-8A-1054-0002 PL40 30 m cable $899 1-45A-1054-0003 PL37 cable $57 1-37A-1057-0131 PL22 cable $57 1-38A-1057-0132 PL26(T) cable $97 1-37A-1057-0133 PL23(T) cable $85 1-38A-1061-0613-RS SP2 probe RBE $2,025 6-7A-1068-0002-RBE SP2-1 rear exit RBE $2,025 6-7A-1068-0005-RS SP2-1 probe RBE $2,025 6-7A-1068-0095-RS SP2-1 probe (Z-lock) RBE $2,295 6-7A-1070-0003-RBE MIH head RBE $1,785 6-3A-1070-0003 MIH head $6,776 1-4A-1071-0001 Manual autojoint probe stand $222 1-48A-1073-0030 PI7-2 interface $1,117 1-40A-1073-0121-RBE TP7M probe RBE $1,165 6-4A-1073-0121 TP7M probe kit $5,370 1-21A-1073-0261 TP7M enhanced probe kit $6,657 1-21A-1074-0020 PH6M head $1,695 1-3A-1076-0070 PEM1 autojoint extension bar $972 1-39, 1-50A-1076-0071 PEM2 autojoint extension bar $1,198 1-39, 1-50A-1076-0072 PEM3 autojoint extension bar $1,424 1-39, 1-50A-1076-0073 PEM4 autojoint extension bar $1,481 1-39A-1076-0100 PEM extension kit $3,305 1-50A-1085-0005 SCR200 mounting kit $19 1-24A-1085-0016 Cleaning kit $18 1-18, 1-23A-1085-0370-RBE SCR200 rack RBE $1,865 6-4A-1085-0370 SCR200 rack $6,855 1-24A-1207-0001 TP200 probe (SF) $4,516 1-23A-1207-0002 TP200 probe (LF) $4,516 1-23A-1207-0010 TP200 stylus module (SF) $678 1-23A-1207-0011 TP200 stylus module (LF) $678 1-23A-1207-0020-RBE TP200 probe sensor RBE $995 6-4A-1207-0030 SCR200 kit (SF modules) $8,692 1-24A-1207-0046-RBE TP200B probe sensor RBE $995 6-4A-1207-0050 PI200 interface $780 1-41A-1207-0055 TP200B probe with SF module $4,516 1-23A-1207-0070 SCR200 kit (LF modules) $8,692 1-24A-1311-0033-RBE TPES probe RBE $660 6-4A-1327-0100 IS1-2 interface $2,826 1-41A-1332-0002-RBE MH8 head RBE $685 6-3A-1332-0002 MH8 head $3,385 1-3A-1333-0174 CMM optics mounting kit $795 3-9A-1345-0220 HCU1 hand control unit $766 1-10A-1368-0100-RBE PHC10-2 RBE $1,005 6-3A-1368-0100 PHC10-2 controller (RS232) $2,966 1-10A-1368-0101 PHC10-2 controller (IEEE) $3,079 1-10A-1371-0163-RBE MCR20 rack RBE $990 6-4A-1371-0261 MCR20 rack kit 1 $5,263 1-19A-1371-0262 MCR20 rack kit 2 $5,263 1-19A-1371-0263 MCR20 rack kit 3 $5,263 1-19A-1371-0264 MCR20 rack kit 4 $5,263 1-19A-1371-0265 MCR20 rack kit 5 $5,263 1-19A-1371-0266 MCR20 rack kit 6 $5,263 1-19A-1371-0270-RBE TP20 SF module RBE $810 6-4A-1371-0270 TP20 SF probe module $969 1-18A-1371-0271-RBE TP20 MF module RBE $810 6-4A-1371-0271 TP20 MF probe module $969 1-18A-1371-0272-RBE TP20 EF module RBE $810 6-4A-1371-0272 TP20 EF probe module $969 1-18



C-C

ON, INC.



7-4

Alp

ha-n

umer

ic p

rice

list

A-1371-0275-RBE TP20 body RBE $535 6-4A-1371-0290 TP20 probe kit 1 $3,875 1-17A-1371-0291 TP20 probe kit 2 $3,875 1-17A-1371-0292 TP20 probe kit 3 $3,875 1-17A-1371-0293 TP20 probe kit 4 $3,875 1-17A-1371-0294 TP20 probe kit 5 $3,875 1-17A-1371-0295 TP20 probe kit 6 $3,875 1-17A-1371-0347 MSR1 rack $404 1-48A-1371-0392 TP20 LF probe module $969 1-18A-1371-0418 TP20 probe kit 7 $4,198 1-17A-1371-0419-RBE TP20 6-way module RBE $900 6-4A-1371-0419 TP20 6-way probe module $1,292 1-18A-1371-0430-RBE TP20 EM1 module kit RBE $900 6-4A-1371-0430 TP20 EM1 module kit $1,173 1-18A-1371-0431-RBE TP20 EM2 module kit RBE $900 6-4A-1371-0431 TP20 EM2 module kit $1,211 1-18A-1371-0432 TP20 EM1/EM2 kit $2,153 1-18A-1371-0640 TP20 NI probe kit 1 $3,875 1-17A-1371-0641 TP20 NI probe kit 2 $3,875 1-17A-1371-0642 TP20 NI probe kit 3 $3,875 1-17A-1371-0643 TP20 NI probe kit 4 $3,875 1-17A-1371-0644 TP20 NI probe kit 5 $3,875 1-17A-1371-0645 TP20 NI probe kit 6 $3,875 1-17A-1373-0001 MIH-S head $7,793 1-4A-1373-0002 MIH-SI interface $622 1-4A-1506-0010 PI4-2 interface $791 1-40A-1506-0100 HC2 probe arm/disarm switch $57 1-41A-1520-0101-RBE ACC2-2 controller RBE $1,005 6-3A-1520-0101 ACC2-2 autochange controller $2,959 1-44A-2003-7602 IMP for MP3 probe $1,158 2-8A-2003-7603 IMP for MP3 probe $1,158 2-8A-2003-7604 IMP for MP3 probe $1,158 2-8A-2003-7605 IMP for MP3 probe $1,158 2-8A-2003-7606 IMP for MP3 probe $1,158 2-8A-2003-7607 IMP for MP3 probe $1,158 2-8A-2003-7608 IMP for MP3 probe $1,158 2-8A-2003-7609 IMP for MP3 probe $1,158 2-8A-2003-7610 IMP for MP3 probe $1,158 2-8A-2003-7611 IMP for MP3 probe $1,158 2-8A-2003-7612 IMP for MP3 probe $1,158 2-8A-2003-7613 IMP for MP3 probe $1,158 2-8A-2003-7621 IMP for MP3 probe $1,158 2-8A-2003-7622 IMP for MP3 probe $974 2-8A-2003-7623 IMP for MP3 probe $1,158 2-8A-2003-7624 IMP for MP3 probe $1,158 2-8A-2003-7625 IMP for MP3 probe $1,158 2-8A-2003-7626 IMP for MP3 probe $1,158 2-8A-2003-7627 IMP for MP3 probe $1,158 2-8A-2003-7628 IMP for MP3 probe $1,158 2-8A-2003-7629 IMP for MP3 probe $1,158 2-8A-2003-7630 IMP for MP3 probe $1,158 2-8A-2003-7631 IMP for MP3 probe $1,158 2-8A-2003-7632 IMP for MP3 probe $1,158 2-8A-2003-7640 IMP for MP3 probe $1,158 2-8A-2003-7641 IMP for MP3 probe $1,158 2-8A-2003-7642 IMP for MP3 probe $1,158 2-8A-2003-7643 IMP for MP3 probe $1,158 2-8A-2003-7644 IMP for MP3 probe $1,158 2-8A-2003-7645 IMP for MP3 probe $1,158 2-8A-2003-7646 IMP for MP3 probe $1,158 2-8A-2003-7647 IMP for MP3 probe $1,158 2-8A-2003-7648 IMP for MP3 probe $1,158 2-8A-2003-7649 IMP for MP3 probe $1,158 2-8A-2003-7650 IMP for MP3 probe $1,158 2-8A-2003-7651 IMP for MP3 probe $1,158 2-8A-2003-7659 IMP for MP3 probe $1,158 2-8A-2003-7660 IMP for MP3 probe $1,158 2-8A-2003-7661 IMP for MP3 probe $1,158 2-8A-2003-7662 IMP for MP3 probe $1,158 2-8A-2003-7663 IMP for MP3 probe $1,158 2-8



C-C

ON, INC.

7-5

Alp

ha-n

umer

ic p

rice

list


A-2003-7664 IMP for MP3 probe $1,158 2-8A-2003-7665 IMP for MP3 probe $1,158 2-8A-2003-7666 IMP for MP3 probe $1,158 2-8A-2003-7667 IMP for MP3 probe $1,158 2-8A-2003-7668 IMP for MP3 probe $1,158 2-8A-2003-7669 IMP for MP3 probe $1,158 2-8A-2003-7670 IMP for MP3 probe $1,102 2-8A-2003-7678 IMP for MP3 probe $1,158 2-8A-2003-7679 IMP for MP3 probe $1,158 2-8A-2003-7680 IMP for MP3 probe $1,158 2-8A-2003-7681 IMP for MP3 probe $1,158 2-8A-2003-7682 IMP for MP3 probe $1,158 2-8A-2003-7683 IMP for MP3 probe $1,158 2-8A-2003-7684 IMP for MP3 probe $1,158 2-8A-2003-7685 IMP for MP3 probe $1,158 2-8A-2003-7686 IMP for MP3 probe $1,158 2-8A-2003-7687 IMP for MP3 probe $1,158 2-8A-2003-7688 IMP for MP3 probe $1,158 2-8A-2003-7689 IMP for MP3 probe $1,158 2-8A-2003-7697 IMP for MP3 probe $1,158 2-8A-2003-7698 IMP for MP3 probe $1,158 2-8A-2003-7699 IMP for MP3 probe $1,158 2-8A-2003-7700 IMP for MP3 probe $1,158 2-8A-2003-7701 IMP for MP3 probe $1,158 2-8A-2003-7702 IMP for MP3 probe $1,158 2-8A-2003-7703 IMP for MP3 probe $1,158 2-8A-2003-7704 IMP for MP3 probe $1,158 2-8A-2003-7705 IMP for MP3 probe $1,158 2-8A-2003-7706 IMP for MP3 probe $1,158 2-8A-2003-7707 IMP for MP3 probe $1,158 2-8A-2003-7708 IMP for MP3 probe $1,158 2-8A-2003-7716 IMP for MP3 probe $1,158 2-8A-2003-7717 IMP for MP3 probe $1,158 2-8A-2003-7718 IMP for MP3 probe $1,158 2-8A-2003-7719 IMP for MP3 probe $1,158 2-8A-2003-7720 IMP for MP3 probe $1,158 2-8A-2003-7721 IMP for MP3 probe $1,158 2-8A-2003-7722 IMP for MP3 probe $1,158 2-8A-2003-7723 IMP for MP3 probe $1,158 2-8A-2003-7724 IMP for MP3 probe $1,158 2-8A-2003-7725 IMP for MP3 probe $1,158 2-8A-2003-7726 IMP for MP3 probe $1,158 2-8A-2003-7727 IMP for MP3 probe $1,158 2-8A-2003-7735 IMP for MP3 probe $1,158 2-8A-2003-7736 IMP for MP3 probe $1,158 2-8A-2003-7737 IMP for MP3 probe $1,158 2-8A-2003-7738 IMP for MP3 probe $1,158 2-8A-2003-7739 IMP for MP3 probe $1,158 2-8A-2003-7740 IMP for MP3 probe $1,158 2-8A-2003-7741 IMP for MP3 probe $1,158 2-8A-2003-7742 IMP for MP3 probe $1,158 2-8A-2003-7743 IMP for MP3 probe $1,158 2-8A-2003-7744 IMP for MP3 probe $1,158 2-8A-2003-7745 IMP for MP3 probe $1,158 2-8A-2003-7746 IMP for MP3 probe $1,158 2-8A-2003-7754 IMP for MP3 probe $1,158 2-8A-2003-7755 IMP for MP3 probe $1,158 2-8A-2003-7756 IMP for MP3 probe $1,158 2-8A-2003-7757 IMP for MP3 probe $1,158 2-8A-2003-7758 IMP for MP3 probe $1,158 2-8A-2003-7759 IMP for MP3 probe $1,158 2-8A-2003-7760 IMP for MP3 probe $1,158 2-8A-2003-7761 IMP for MP3 probe $1,158 2-8A-2003-7762 IMP for MP3 probe $1,158 2-8A-2003-7763 IMP for MP3 probe $1,158 2-8A-2003-7764 IMP for MP3 probe $1,158 2-8A-2003-7765 IMP for MP3 probe $1,158 2-8A-2003-7773 IMP for MP3 probe $1,158 2-8A-2003-7774 IMP for MP3 probe $1,158 2-8A-2003-7775 IMP for MP3 probe $1,158 2-8



C-C

ON, INC.



7-6

Alp

ha-n

umer

ic p

rice

list

A-2003-7776 IMP for MP3 probe $974 2-8A-2003-7777 IMP for MP3 probe $1,158 2-8A-2003-7778 IMP for MP3 probe $1,158 2-8A-2003-7779 IMP for MP3 probe $1,158 2-8A-2003-7780 IMP for MP3 probe $1,158 2-8A-2003-7781 IMP for MP3 probe $1,158 2-8A-2003-7782 IMP for MP3 probe $1,158 2-8A-2003-7783 IMP for MP3 probe $1,158 2-8A-2003-7784 IMP for MP3 probe $1,102 2-8A-2003-7792 IMP for MP3 probe $1,158 2-8A-2003-7793 IMP for MP3 probe $1,158 2-8A-2003-7794 IMP for MP3 probe $1,158 2-8A-2003-7795 IMP for MP3 probe $1,102 2-8A-2003-7796 IMP for MP3 probe $1,158 2-8A-2003-7797 IMP for MP3 probe $1,158 2-8A-2003-7798 IMP for MP3 probe $1,158 2-8A-2003-7799 IMP for MP3 probe $1,158 2-8A-2003-7800 IMP for MP3 probe $1,158 2-8A-2003-7801 IMP for MP3 probe $1,158 2-8A-2003-7802 IMP for MP3 probe $1,158 2-8A-2003-7803 IMP for MP3 probe $1,158 2-8A-2003-7811 IMP for MP3 probe $1,158 2-8A-2003-7812 IMP for MP3 probe $1,158 2-8A-2003-7813 IMP for MP3 probe $1,158 2-8A-2003-7814 IMP for MP3 probe $1,158 2-8A-2003-7815 IMP for MP3 probe $1,158 2-8A-2003-7816 IMP for MP3 probe $1,158 2-8A-2003-7817 IMP for MP3 probe $1,158 2-8A-2003-7818 IMP for MP3 probe $1,158 2-8A-2003-7819 IMP for MP3 probe $1,158 2-8A-2003-7820 IMP for MP3 probe $1,158 2-8A-2003-7821 IMP for MP3 probe $1,158 2-8A-2003-7822 IMP for MP3 probe $1,158 2-8A-2003-7830 IMP for MP3 probe $1,158 2-8A-2003-7831 IMP for MP3 probe $1,158 2-8A-2003-7832 IMP for MP3 probe $1,158 2-8A-2003-7833 IMP for MP3 probe $1,158 2-8A-2003-7834 IMP for MP3 probe $1,102 2-8A-2003-7835 IMP for MP3 probe $1,158 2-8A-2003-7836 IMP for MP3 probe $1,158 2-8A-2003-7837 IMP for MP3 probe $1,158 2-8A-2003-7838 IMP for MP3 probe $1,158 2-8A-2003-7839 IMP for MP3 probe $1,158 2-8A-2003-7840 IMP for MP3 probe $1,158 2-8A-2003-7841 IMP for MP3 probe $1,158 2-8A-2008-0110 TS20 probe (32 mm tooling) $772 2-42A-2008-0121 TS20 probe (40 mm tooling) $772 2-42A-2008-0123 TS20 probe (32 mm tooling) $772 2-42A-2008-0151 TS20 probe (25 mm tooling) $772 2-42A-2008-0277 TS20 probe (40 mm tooling) $772 2-42A-2008-0368-RBE TS27R RBE $805 6-6A-2008-0368 TS27R probe, stylus and holder $1,136 2-29A-2008-0382 TS27R stylus $111 2-29, 5-26A-2008-0384 TS27R stylus $130 2-29, 5-26A-2008-0389 TS27R stylus holder $25 2-29, 5-26A-2008-0448 TS27R stylus conversion kit $120 2-29, 5-26A-2008-0601 TS20 replacement stylus kit $116 2-42, 5-27A-2008-0602 TS20 replacement stylus kit $116 2-42, 5-27A-2008-0603 TS20 replacement stylus kit $116 2-42, 5-27A-2012-0001 CP1 probe kit (CAT 40 shank) $2,195 2-21A-2012-0002 CP1 probe kit (CAT 50 shank) $2,255 2-21A-2012-0003 CP1 probe kit (BT 40 shank) $2,195 2-21A-2012-0004 CP1 probe kit (BT 50 shank) $2,255 2-21A-2012-0007-RBE CP1 probe RBE $590 6-5A-2012-0007 CP1 probe module $1,780 2-21A-2012-0064 CP1 probe adjustment module $400 2-21A-2019-0006 MI5 interface $583 2-5, 2-35, 2-43A-2019-0018 PSU3 power supply $303 2-44A-2023-0010 SSR converter $139 2-43A-2027-7046 TK3 tool kit $36 1-52



C-C

ON, INC.

7-7

Alp

ha-n

umer

ic p

rice

list


A-2028-7303 Junction box $119 2-5, 2-10A-2028-7422 IMM $902 2-4, 2-9A-2028-7425 IMM $902 2-4, 2-9A-2028-7567 IMM $902 2-4, 2-9A-2028-7568 IMM $902 2-4, 2-9A-2028-7569 IMM $902 2-4, 2-9A-2028-7570 IMM $902 2-4, 2-9A-2028-7571 IMM $902 2-4, 2-9A-2028-7572 IMM $754 2-4, 2-9A-2028-7573 IMM $902 2-4, 2-9A-2028-7574 IMP inductive module $623 2-35A-2028-7704 IMP for MP1 probe $790 2-3A-2028-7705 IMP for MP1 probe $790 2-3A-2028-7706 IMP for MP1 probe $790 2-3A-2028-7707 IMP for MP1 probe $790 2-3A-2028-7708 IMP for MP1 probe $790 2-3A-2028-7709 IMP for MP1 probe $790 2-3A-2028-7710 IMP for MP1 probe $790 2-3A-2028-7711 IMP for MP1 probe $790 2-3A-2028-7712 IMP for MP1 probe $790 2-3A-2028-7713 IMP for MP1 probe $790 2-3A-2028-7714 IMP for MP1 probe $790 2-3A-2028-7721 IMP for MP1 probe $790 2-3A-2028-7722 IMP for MP1 probe $790 2-3A-2028-7723 IMP for MP1 probe $790 2-3A-2028-7724 IMP for MP1 probe $790 2-3A-2028-7725 IMP for MP1 probe $790 2-3A-2028-7726 IMP for MP1 probe $790 2-3A-2028-7727 IMP for MP1 probe $790 2-3A-2028-7728 IMP for MP1 probe $790 2-3A-2028-7729 IMP for MP1 probe $790 2-3A-2028-7730 IMP for MP1 probe $790 2-3A-2028-7731 IMP for MP1 probe $790 2-3A-2028-7738 IMP for MP1 probe $790 2-3A-2028-7739 IMP for MP1 probe $790 2-3A-2028-7740 IMP for MP1 probe $790 2-3A-2028-7741 IMP for MP1 probe $790 2-3A-2028-7742 IMP for MP1 probe $752 2-3A-2028-7743 IMP for MP1 probe $790 2-3A-2028-7744 IMP for MP1 probe $790 2-3A-2028-7745 IMP for MP1 probe $790 2-3A-2028-7746 IMP for MP1 probe $790 2-3A-2028-7747 IMP for MP1 probe $752 2-3A-2028-7748 IMP for MP1 probe $790 2-3A-2028-7755 IMP for MP1 probe $790 2-3A-2028-7756 IMP for MP1 probe $790 2-3A-2028-7757 IMP for MP1 probe $790 2-3A-2028-7758 IMP for MP1 probe $790 2-3A-2028-7759 IMP for MP1 probe $790 2-3A-2028-7760 IMP for MP1 probe $790 2-3A-2028-7761 IMP for MP1 probe $790 2-3A-2028-7762 IMP for MP1 probe $790 2-3A-2028-7763 IMP for MP1 probe $790 2-3A-2028-7764 IMP for MP1 probe $790 2-3A-2028-7765 IMP for MP1 probe $790 2-3A-2028-7772 IMP for MP1 probe $790 2-3A-2028-7773 IMP for MP1 probe $752 2-3A-2028-7774 IMP for MP1 probe $790 2-3A-2028-7775 IMP for MP1 probe $790 2-3A-2028-7776 IMP for MP1 probe $752 2-3A-2028-7777 IMP for MP1 probe $790 2-3A-2028-7778 IMP for MP1 probe $790 2-3A-2028-7779 IMP for MP1 probe $790 2-3A-2028-7780 IMP for MP1 probe $790 2-3A-2028-7781 IMP for MP1 probe $790 2-3A-2028-7782 IMP for MP1 probe $790 2-3A-2028-7789 IMP for MP1 probe $790 2-3A-2028-7790 IMP for MP1 probe $790 2-3A-2028-7791 IMP for MP1 probe $790 2-3A-2028-7792 IMP for MP1 probe $790 2-3



C-C

ON, INC.



7-8

Alp

ha-n

umer

ic p

rice

list

A-2028-7793 IMP for MP1 probe $668 2-3A-2028-7794 IMP for MP1 probe $790 2-3A-2028-7795 IMP for MP1 probe $790 2-3A-2028-7796 IMP for MP1 probe $752 2-3A-2028-7797 IMP for MP1 probe $790 2-3A-2028-7798 IMP for MP1 probe $790 2-3A-2028-7799 IMP for MP1 probe $790 2-3A-2028-7806 IMP for MP1 probe $790 2-3A-2028-7807 IMP for MP1 probe $790 2-3A-2028-7808 IMP for MP1 probe $790 2-3A-2028-7809 IMP for MP1 probe $790 2-3A-2028-7810 IMP for MP1 probe $790 2-3A-2028-7811 IMP for MP1 probe $790 2-3A-2028-7812 IMP for MP1 probe $790 2-3A-2028-7813 IMP for MP1 probe $790 2-3A-2028-7814 IMP for MP1 probe $790 2-3A-2028-7815 IMP for MP1 probe $790 2-3A-2028-7816 IMP for MP1 probe $790 2-3A-2028-7823 IMP for MP1 probe $790 2-3A-2028-7824 IMP for MP1 probe $790 2-3A-2028-7825 IMP for MP1 probe $790 2-3A-2028-7826 IMP for MP1 probe $790 2-3A-2028-7827 IMP for MP1 probe $790 2-3A-2028-7828 IMP for MP1 probe $790 2-3A-2028-7829 IMP for MP1 probe $790 2-3A-2028-7830 IMP for MP1 probe $790 2-3A-2028-7831 IMP for MP1 probe $790 2-3A-2028-7832 IMP for MP1 probe $790 2-3A-2028-7833 IMP for MP1 probe $790 2-3A-2028-7840 IMP for MP1 probe $790 2-3A-2028-7841 IMP for MP1 probe $790 2-3A-2028-7842 IMP for MP1 probe $790 2-3A-2028-7843 IMP for MP1 probe $790 2-3A-2028-7844 IMP for MP1 probe $790 2-3A-2028-7845 IMP for MP1 probe $790 2-3A-2028-7846 IMP for MP1 probe $790 2-3A-2028-7847 IMP for MP1 probe $790 2-3A-2028-7848 IMP for MP1 probe $790 2-3A-2028-7849 IMP for MP1 probe $790 2-3A-2028-7850 IMP for MP1 probe $790 2-3A-2028-7857 IMP for MP1 probe $790 2-3A-2028-7858 IMP for MP1 probe $790 2-3A-2028-7859 IMP for MP1 probe $790 2-3A-2028-7860 IMP for MP1 probe $790 2-3A-2028-7861 IMP for MP1 probe $790 2-3A-2028-7862 IMP for MP1 probe $790 2-3A-2028-7863 IMP for MP1 probe $790 2-3A-2028-7864 IMP for MP1 probe $790 2-3A-2028-7865 IMP for MP1 probe $790 2-3A-2028-7866 IMP for MP1 probe $790 2-3A-2028-7867 IMP for MP1 probe $790 2-3A-2028-7874 IMP for MP1 probe $790 2-3A-2028-7875 IMP for MP1 probe $790 2-3A-2028-7876 IMP for MP1 probe $790 2-3A-2028-7877 IMP for MP1 probe $790 2-3A-2028-7878 IMP for MP1 probe $790 2-3A-2028-7879 IMP for MP1 probe $790 2-3A-2028-7880 IMP for MP1 probe $790 2-3A-2028-7881 IMP for MP1 probe $790 2-3A-2028-7882 IMP for MP1 probe $790 2-3A-2028-7883 IMP for MP1 probe $790 2-3A-2028-7884 IMP for MP1 probe $790 2-3A-2028-7891 IMP for MP1 probe $790 2-3A-2028-7892 IMP for MP1 probe $790 2-3A-2028-7893 IMP for MP1 probe $790 2-3A-2028-7894 IMP for MP1 probe $790 2-3A-2028-7895 IMP for MP1 probe $790 2-3A-2028-7896 IMP for MP1 probe $790 2-3A-2028-7897 IMP for MP1 probe $790 2-3A-2028-7898 IMP for MP1 probe $790 2-3



C-C

ON, INC.

7-9

Alp

ha-n

umer

ic p

rice

list


A-2028-7899 IMP for MP1 probe $790 2-3A-2028-7900 IMP for MP1 probe $790 2-3A-2028-7901 IMP for MP1 probe $790 2-3A-2028-7908 IMP for MP1 probe $790 2-3A-2028-7909 IMP for MP1 probe $790 2-3A-2028-7910 IMP for MP1 probe $790 2-3A-2028-7911 IMP for MP1 probe $790 2-3A-2028-7912 IMP for MP1 probe $790 2-3A-2028-7913 IMP for MP1 probe $790 2-3A-2028-7914 IMP for MP1 probe $790 2-3A-2028-7915 IMP for MP1 probe $790 2-3A-2028-7916 IMP for MP1 probe $790 2-3A-2028-7917 IMP for MP1 probe $790 2-3A-2028-7918 IMP for MP1 probe $790 2-3A-2028-7925 IMP for MP1 probe $790 2-3A-2028-7926 IMP for MP1 probe $790 2-3A-2028-7927 IMP for MP1 probe $790 2-3A-2028-7928 IMP for MP1 probe $790 2-3A-2028-7929 IMP for MP1 probe $790 2-3A-2028-7930 IMP for MP1 probe $790 2-3A-2028-7931 IMP for MP1 probe $790 2-3A-2028-7932 IMP for MP1 probe $790 2-3A-2028-7933 IMP for MP1 probe $790 2-3A-2028-7934 IMP for MP1 probe $790 2-3A-2028-7935 IMP for MP1 probe $790 2-3A-2028-7942 IMP for MP1 probe $790 2-3A-2028-7943 IMP for MP1 probe $790 2-3A-2028-7944 IMP for MP1 probe $790 2-3A-2028-7945 IMP for MP1 probe $790 2-3A-2028-7946 IMP for MP1 probe $790 2-3A-2028-7947 IMP for MP1 probe $790 2-3A-2028-7948 IMP for MP1 probe $790 2-3A-2028-7949 IMP for MP1 probe $790 2-3A-2028-7950 IMP for MP1 probe $790 2-3A-2028-7951 IMP for MP1 probe $790 2-3A-2028-7952 IMP for MP1 probe $790 2-3A-2028-7959 IMP for MP1 probe $790 2-3A-2028-7960 IMP for MP1 probe $790 2-3A-2028-7961 IMP for MP1 probe $790 2-3A-2028-7962 IMP for MP1 probe $790 2-3A-2028-7963 IMP for MP1 probe $790 2-3A-2028-7964 IMP for MP1 probe $790 2-3A-2028-7965 IMP for MP1 probe $790 2-3A-2028-7966 IMP for MP1 probe $790 2-3A-2028-7967 IMP for MP1 probe $790 2-3A-2028-7968 IMP for MP1 probe $790 2-3A-2028-7969 IMP for MP1 probe $752 2-3A-2030-0121-RBE LTO2 OMP RBE $715 6-7A-2030-0183-RBE LTO2S OMP RBE $715 6-7A-2030-0183 LTO2S OMP $1,647 2-31A-2030-0211 25 mm straight shank $218 2-22A-2030-0218-RBE LTO2T (25 mm shank) RBE $715 6-7A-2030-0218 LTO2T OMP (25 mm shank) $1,647 2-31A-2030-0244 LTO2S accessories kit $148 2-31A-2030-0252 1 in straight shank $218 2-22A-2030-0274-RBE LTO2T (1 in shank) RBE $715 6-7A-2030-0274 LTO2T OMP (1 in shank) $1,647 2-31A-2030-0330-RBE LTO3T (25 mm shank) RBE $715 6-7A-2030-0330 LTO3T OMP (25 mm shank) $1,875 2-31A-2030-0334-RBE LTO3T (1 in shank) RBE $715 6-7A-2030-0334 LTO3T OMP (1 in shank) $1,875 2-31A-2030-0560 LTO2 battery upgrade kit $107 2-31A-2033-0576-RBE OMM RBE $605 6-7A-2033-0576 OMM optical receiver $986 2-13, 2-14, 2-15, 2-16, 2-31A-2033-0704-RBE MP7, MP8, MP9, MP10 RBE $705 6-5A-2033-0755 MP8 shank switch assembly $115 6-8A-2033-0830 Mounting bracket $119 2-13, 2-14, 2-15, 2-16, 2-18, 2-20, 2-27, 2-31A-2033-0861-RBE MP8 OMP 35° RBE $590 6-5A-2033-0862-RBE MP8 OMP 70° RBE $590 6-5



C-C

ON, INC.



7-10

Alp

ha-n

umer

ic p

rice

list

A-2033-0946-RBE MP7 OMP 35° RBE $590 6-5A-2033-0947-RBE MP7 OMP 70° RBE $590 6-5A-2033-1165-RBE MP3 wide angle OMP (short) RBE $955 6-5A-2033-1166-RBE MP3 wide angle OMP (long) RBE $955 6-5A-2034-0037-RBE MP9 OMP 35° RBE $590 6-5A-2034-0038-RBE MP9 OMP 70° RBE $590 6-5A-2037-0010 MI8 interface $198 2-12, 2-23, 2-29, 2-35, 2-43A-2045-0001 MP11 probe $3,079 2-11A-2045-0003-RBE MP11 probe RBE $705 6-5A-2045-0051 Spare MP11 cable $132 2-11A-2045-0243 1/2 in straight shank $218 2-22A-2048-0500 TS20 probe (25 mm tooling) $772 2-42A-2048-2050 Tool datuming stylus $137 5-27A-2048-2051 Tool datuming stylus $137 5-27A-2051-4576-RBE MP1/S probe RBE $705 6-5A-2051-4576 MP1/S probe $2,961 2-2A-2051-4577-RBE MP1/R probe RBE $705 6-5A-2051-4577 MP1/R probe $2,961 2-2A-2051-4777 MP1/R 3-way mounting block $422 2-6A-2051-7080 MA1 probe adaptor $368 2-6A-2051-7105 Outer diaphragm replacement kit $95 2-6, 2-11, 2-23, 6-8A-2051-7146 MA1/R probe adaptor $368 2-6A-2053-5358-RBE MP3/MP6 probe RBE $705 6-5, 6-6A-2053-5358 MP3 probe $3,098 2-7, 2-17, 2-19A-2053-6468 Shorting cover $137 2-17, 2-19A-2053-7531 TK1 tool kit $36 1-52, 2-6, 2-10, 2-23, 2-34A-2053-8156 Outer diaphragm replacement kit $95 2-10, 6-8A-2054-3968 MP4 probe (side exit) $3,364 2-23A-2054-4657 M4/Ø4.5 stylus adaptor $34 5-51A-2054-6373 MP4 probe (rear exit) $3,364 2-23A-2054-6473-RBE MP4 probe RBE $705 6-6A-2054-6474-RBE MP4 rear exit base RBE $545 6-6A-2054-6476-RBE MP4 side exit base RBE $545 6-6A-2054-6566 M4 chip shield $57 2-23A-2063-5308 FS3 single axis adjustable holder $238 2-35A-2063-5431 FS2 fi xed female socket $136 2-35A-2063-6098-RBE LP2 probe RBE $715 6-7A-2063-6098 LP2 probe $2,961 2-17, 2-19, 2-32A-2063-6697 FS1 adjustable female socket $136 2-35A-2063-7001 LPE1 extension $285 2-17, 2-19, 2-35A-2063-7002 LPE2 extension $285 2-17, 2-19, 2-35A-2063-7003 LPE3 extension $285 2-17, 2-19, 2-35A-2063-7542 LP2 service kit $70 2-34, 6-8A-2063-7587 C spanner $17 2-34A-2063-7600 MA4 90° adaptor $464 2-17, 2-19, 2-35A-2063-7774 COS to LP2 adaptor $603 2-35A-2063-8020-RBE LP2DD probe RBE $715 6-7A-2063-8020 LP2DD probe $2,961 2-33A-2063-8023 LP2/LP2DD conversion kit $160 2-34, 6-8A-2063-8030 LP2DD diaphragm replacement kit $40 2-34A-2063-8326 LP2 straight shank (0.75 in) $1,223 2-35A-2063-8328 LP2 straight shank (1 in) $1,223 2-35A-2063-8366 LP2 straight shank (22 mm) $1,223 2-35A-2064-0002-RBE LP2H probe RBE $715 6-7A-2064-0002 LP2H probe $2,961 2-33A-2075-0009-RBE MP12 probe RBE $995 6-5A-2075-0141 MI12 interface board $798 2-43A-2075-0142-RBE MI12 interface RBE $695 6-7A-2075-0142 MI12 interface $931 2-13, 2-14, 2-15, 2-16, 2-31, 2-43A-2084-0500 MI5 interface board $498 2-43A-2085-0075-RBE MP10 OMP 35° RBE $590 6-5A-2085-0076-RBE MP10 OMP 70° RBE $590 6-5A-2098-0104-RBE SP600 probe RBE $3,730 6-3A-2098-0105 SP600M probe $11,020 1-32A-2098-0255 SCR200 rack $5,113 1-32A-2098-0284 Stylus module SH600 standard $458 1-32A-2098-0724-RBE SCR600 rack RBE $1,865 6-4A-2098-0890 SP600Q kit $11,020 1-32A-2098-0933 SCP600 stylus change port $1,400 1-47A-2098-1000 AC1 analog converter PC card $2,315 1-32



C-C

ON, INC.

7-11

Alp

ha-n

umer

ic p

rice

list


A-2098-1036 Stylus module SH600 extended $623 1-32A-2103-0008-RBE MP3 360° OMP RBE $810 6-5A-2107-0035 MP700 probe (35° output) $4,564 2-13A-2107-0036-RBE MP700 OMP 35° RBE $685 6-5A-2107-0036 MP700 OMP (35° output) $849 2-13A-2107-0070 MP700 probe (70° output) $4,564 2-13A-2107-0071-RBE MP700 OMP 70° RBE $685 6-5A-2107-0071 MP700 OMP (70° output) $849 2-13A-2108-0001-RBE MP700 probe module RBE $910 6-5A-2108-0001 MP700 probe module $4,010 2-13A-2115-0001-RBE OMI RBE $865 6-7A-2115-0001 OMI interface $1,582 2-44A-2116-0140 Tool datuming stylus $109 5-27A-2116-0141 Tool datuming stylus $127 5-27A-2116-0142 Tool datuming stylus $158 5-27A-2116-0149-RBE RP2 probe RBE $685 6-7A-2116-0149 RP2 probe $1,470 2-41A-2116-0150 RP2 DD probe $1,470 2-41A-2116-0200-RBE(REAR EXIT) TSA RBE $1,710 6-7A-2116-0201-RBE(SIDE EXIT) TSA RBE $1,710 6-7A-2116-0621-RBE MP15 probe RBE $795 6-5A-2116-0685-RBE MP15F probe RBE $795 6-5A-2116-1802 MP15 hard-wired probe kit $2,114 2-12A-2150-0815-RBE PHS RBE $13,385 6-3A-2154-0007-RBE RP1 probe RBE $685 6-7A-2154-0007 RP1 probe and tool kit $1,470 2-41A-2154-0008 RP1 DD probe and tool kit $1,470 2-41A-2172-0001 AC2 analog converter PC card $2,692 1-32A-2176-0010 TSi2 interface $185 2-44A-2176-0019 HPRA storage stand $297 2-37A-2176-0025 HPRA rear exit base $748 2-37A-2176-0187 HPRA side exit base $748 2-37A-2176-0883 HPRA 6 in chuck with RP3 kit $3,538 2-36A-2176-0884 HPRA 8 in chuck with RP3 kit $3,538 2-36A-2176-0885 HPRA 10 in chuck with RP3 kit $3,538 2-36A-2176-0886 HPRA 12 in chuck with RP3 kit $3,538 2-36A-2176-0887 HPRA 15 in chuck with RP3 kit $3,538 2-36A-2176-0888 HPRA 18 in chuck with RP3 kit $3,538 2-36A-2176-0889 HPRA 24 in chuck with RP3 kit $3,538 2-36A-2176-1152 TSi2-C interface $185 2-44A-2181-0465 TSi3 interface $226 2-44A-2181-0645 HPMA 6 in R/E with RP3 kit $4,718 2-39A-2181-0646 HPMA 8 in R/E with RP3 kit $4,718 2-39A-2181-0647 HPMA 10 in R/E with RP3 kit $4,718 2-39A-2181-0648 HPMA 12 in R/E with RP3 kit $4,718 2-39A-2181-0649 HPMA 15 in R/E with RP3 kit $4,718 2-39A-2181-0650 HPMA 18 in R/E with RP3 kit $4,718 2-39A-2181-0651 HPMA 24 in R/E with RP3 kit $4,718 2-39A-2181-0652 HPMA 6 in S/E with RP3 kit $4,718 2-39A-2181-0653 HPMA 8 in S/E with RP3 kit $4,718 2-39A-2181-0654 HPMA 10 in S/E with RP3 kit $4,718 2-39A-2181-0655 HPMA 12 in S/E with RP3 kit $4,718 2-39A-2181-0656 HPMA 15 in S/E with RP3 kit $4,718 2-39A-2181-0657 HPMA 18 in S/E with RP3 kit $4,718 2-39A-2181-0658 HPMA 24 in S/E with RP3 kit $4,718 2-39A-2181-2239 TSi3-C interface $226 2-44A-2197-0049-RBE RP3 probe RBE $685 6-7A-2197-0049 RP3 probe $1,470 2-41A-2197-0157 Arm stylus kit (16 mm tooling) $116 2-37, 2-40, 5-27A-2197-0158 Arm stylus kit (20 mm tooling) $116 2-37, 2-40, 5-27A-2197-0159 Arm stylus kit (25 mm tooling) $116 2-37, 2-40, 5-27A-2197-0160 Arm stylus kit (32 mm tooling) $116 2-37, 2-40, 5-27A-2197-0161 Arm stylus kit (40 mm tooling) $116 2-37, 2-40, 5-27A-2197-0162 Arm stylus kit (50 mm tooling) $116 2-37, 2-40, 5-27A-2237-1000-RBE SP25M probe body RBE $1,520 6-3A-2237-1001 SP25M scanning probe kit #1 $10,362 1-26A-2237-1002 SP25M scanning probe kit #2 $10,362 1-26A-2237-1003 SP25M scanning probe kit #3 $10,362 1-26A-2237-1004 SP25M scanning probe kit #4 $12,189 1-26A-2237-1015 SP25M full combination kit $17,934 1-25



C-C

ON, INC.



7-12

Alp

ha-n

umer

ic p

rice

list

A-2237-1101 SP25M-1 scanning module kit $4,765 1-26A-2237-1102 SP25M-2 scanning module kit $4,765 1-26A-2237-1103 SP25M-3 scanning module kit $4,765 1-26A-2237-1104 SP25M-4 full module kit $7,756 1-27A-2237-1108 SP25M-4 entry level mod kit $6,084 1-27A-2237-1109 SP25M-4 basic module kit $6,582 1-27A-2237-1111-RBE SM25-1 module RBE $1,080 6-3A-2237-1111 SM25-1 scanning module $4,432 1-27A-2237-1112-RBE SM25-2 module RBE $1,080 6-3A-2237-1112 SM25-2 scanning module $4,432 1-27A-2237-1113-RBE SM25-3 module RBE $1,080 6-3A-2237-1113 SM25-3 scanning module $4,432 1-27A-2237-1114-RBE SM25-4 module RBE $1,185 6-3A-2237-1114 SM25-4 scanning module $5,185 1-27A-2237-1200-RBE TM25-20 TTP module RBE $620 6-3A-2237-1200 TM25-20 TTP module adaptor $3,392 1-27A-2237-1201 TM25-20 TTP module adaptor kit #1 $4,765 1-27A-2237-1301 SH25-1 stylus holder $199 1-27A-2237-1302 SH25-2 stylus holder $300 1-27A-2237-1303 SH25-3 stylus holder $366 1-27A-2237-1304 SH25-4 stylus holder $484 1-27A-2237-1401-RBE FCR25 rack RBE $625 6-4A-2237-1401 FCR25 fl exible change rack $2,549 1-28A-2237-1403-RBE FCR25-L3 RBE $940 6-4A-2237-1403 FCR25-L3 change rack unit $3,768 1-28A-2237-1406 FCR25-L6 change rack unit $6,316 1-28A-2237-1415 FCR25 port adaptor insert kit $366 1-28A-2237-1601 AC3 interface card $3,325 1-27A-2238-0020 KM6080 quill mount plate $180 1-31A-2238-0101-RBE SP80 RBE $4,580 6-4A-2238-0414-RBE SP80H RBE $4,580 6-4A-2238-0419 SP80H probe kit 1 $16,844 1-30A-2238-0430 SH80K stylus holder $581 1-31A-2238-0700 SP80 probe kit 1 $16,844 1-29A-2238-0703 KM80 quill mount plate $180 1-31A-2238-0704 SM80 shank mount plate $901 1-31A-2238-0705 SH80 stylus holder $541 1-31A-2238-0706 SCP80 stylus change port $1,076 1-31A-2238-0720 IU80 interpolator unit $866 1-31A-2238-0726 SCP80V rack port $1,157 1-31A-2238-0732 SP80 probe kit 2 $20,752 1-29A-2238-0733 SP80 probe kit 3 $21,101 1-29A-2238-0734 SP80 probe kit 4 $21,515 1-29A-2238-0735 SP80 probe kit 5 $22,051 1-29A-2238-0736 SP80 probe kit 6 $22,926 1-29A-2238-0737 SP80 probe kit 7 $23,820 1-29A-2253-5120 Air regulator kit $443 2-26, 2-28A-2253-8524-RBE NC1 F150/40 RBE $1,910 6-6A-2253-8525-RBE NC1 F200/90 RBE $1,910 6-6A-2253-8526-RBE NC1 F300/190 RBE $1,910 6-6A-2253-8541-RBE NC1 S700 RBE $1,910 6-6A-2253-8542-RBE NC1 S1000 RBE $1,910 6-6A-2253-8543-RBE NC1 S1400 RBE $1,910 6-6A-2253-8544-RBE NC1 S2000 RBE $1,910 6-6A-2275-0181 HPPA 6 in R/E with RP3 kit $4,181 2-39A-2275-0182 HPPA 8 in R/E with RP3 kit $4,181 2-39A-2275-0183 HPPA 10 in R/E with RP3 kit $4,181 2-39A-2275-0184 HPPA 12 in R/E with RP3 kit $4,181 2-39A-2275-0185 HPPA 15 in R/E with RP3 kit $4,181 2-39A-2275-0186 HPPA 18 in R/E with RP3 kit $4,181 2-39A-2275-0187 HPPA 24 in R/E with RP3 kit $4,181 2-39A-2275-0188 HPPA 6 in S/E with RP3 kit $4,181 2-39A-2275-0189 HPPA 8 in S/E with RP3 kit $4,181 2-39A-2275-0190 HPPA 10 in S/E with RP3 kit $4,181 2-39A-2275-0191 HPPA 12 in S/E with RP3 kit $4,181 2-39A-2275-0192 HPPA 15 in S/E with RP3 kit $4,181 2-39A-2275-0193 HPPA 18 in S/E with RP3 kit $4,181 2-39A-2275-0194 HPPA 24 in S/E with RP3 kit $4,181 2-39A-3060-0002 REVO standard kit 1 $59,063 1-12A-3060-0003 REVO entry level kit 1 $46,993 1-12



C-C

ON, INC.

7-13

Alp

ha-n

umer

ic p

rice

list


A-3060-0004 REVO entry level kit 2 $51,239 1-12A-3060-0008 REVO standard kit 2 $59,160 1-12A-3060-0011 REVO rack kit #1 $7,411 1-13A-3060-0012 REVO rack kit #2 $7,508 1-13A-3060-0014 REVO rack kit #4 $3,251 1-13A-3060-0020 RSP2 probe kit $4,838 1-12A-3060-0021 RSH250 kit $1,162 1-13A-3060-0022 RSH350 kit $1,258 1-13A-3060-0030 RSP3 probe kit $6,773 1-12A-3060-0040 REVO head kit $44,892 1-12A-3060-0310 50 mm diameter datum ball kit $1,258 1-13A-3061-0100 RCP rack changing port $968 1-13A-4007-1000 Productivity+ GibbsCAM plug-in $4,995 2-48A-4007-1400 Productivity+ Active Editor Pro $4,995 2-48A-4007-4000 Productivity+ maintenance $750 2-48A-4007-5100 Fanuc Macro B post processor $1,500 2-48A-4007-5200 Haas post processor $1,500 2-48A-4007-5300 Hitachi Seicos post processor $1,500 2-48A-4007-5400 Makino post processor $1,500 2-48A-4007-5500 Mazatrol ISO post processor $1,500 2-48A-4007-5600 Mitsubishi Meldas post processor $1,500 2-48A-4007-5700 Yasnac post processor $1,500 2-48A-4007-5900 Brother post processor $1,500 2-48A-4007-6000 Heidenhain post processor $1,500 2-48A-4007-6600 Mori Seiki post processor $1,500 2-48A-4007-6700 Siemens post processor $1,500 2-48A-4007-6800 Hurco post processor $1,500 2-48A-4007-8999 Productivity+ 90-day trial FOC 2-48A-4012-0516 Inspection Plus software $1,076 2-45A-4012-0528 Tool setting software $431 2-47A-4012-0541 Inspection software $861 2-47A-4012-0584 Tool setting software $431 2-46A-4012-0610 Inspection Plus software $1,076 2-45A-4012-0685 Inspection Plus software $1,076 2-46A-4012-0820 Tool setting software $646 2-46A-4012-0834 Inspection software $1,076 2-47A-4012-0843 Inspection software $1,076 2-47A-4012-0862 Tool setting software $646 2-46A-4012-0874 Inspection software $861 2-47A-4012-0877 Tool setting software $431 2-47A-4012-0880 Inspection Plus software $1,076 2-45A-4012-0886 Tool setting software $431 2-46A-4012-0890 Inspection Plus software $1,076 2-46A-4012-0895 Tool setting software $646 2-46A-4012-0900 Tool setting software $646 2-46A-4012-0904 Tool setting software $646 2-46A-4012-0908 Inspection Plus software $1,076 2-45A-4012-0936 Inspection Plus software $1,076 2-45A-4012-0942 Inspection Plus software $1,076 2-46A-4012-1016 Inspection software $1,076 2-47A-4012-1074 Inspection software $1,076 2-47A-4013-0007 Tool setting software $431 2-46A-4013-0023 Inspection Plus software $1,076 2-45A-4013-0030 Inspection software $1,076 2-47A-4013-0036 Tool setting software $431 2-46A-4013-0040 Inspection Plus software $1,076 2-46A-4013-0050 Tool setting software $646 2-46A-4013-0062 Tool setting software $646 2-46A-4013-0071 Inspection software $861 2-47A-4013-0083 Inspection software $1,076 2-47A-4013-0088 Tool setting software $646 2-46A-4013-0092 Tool setting software $646 2-46A-4013-0106 Inspection software $1,076 2-47A-4013-0112 Inspection Plus software $1,076 2-45A-4013-0119 Tool setting software $646 2-46A-4013-0123 Tool setting software $646 2-46A-4013-0567 Tool setting software $646 2-46A-4013-0838 Tool setting software $646 2-46A-4014-0011 Inspection software $861 2-47A-4014-0018 Tool setting software $431 2-46



C-C

ON, INC.



7-14

Alp

ha-n

umer

ic p

rice

list

A-4014-0020 Tool setting software $646 2-46A-4014-0025 Tool setting software $646 2-46A-4014-0070 Inspection Plus software $1,076 2-45A-4014-0075 Inspection Plus software $1,076 2-45A-4014-0090 Tool setting software $431 2-46A-4014-0104 Inspection Plus software $1,076 2-46A-4014-0137 Inspection software $861 2-47A-4014-0152 Inspection Plus software $1,076 2-46A-4014-0157 Tool setting software $646 2-46A-4014-0356 Inspection Plus software $1,076 2-45A-4014-0362 Inspection Plus software $1,076 2-46A-4014-0396 Tool setting software $431 2-46A-4014-0401 Tool setting software $646 2-46A-4016-0036 Inspection software $1,076 2-45A-4016-0043 Tool setting software $431 2-46A-4016-0061 Tool setting software $646 2-46A-4016-1009 Inspection Plus software $1,076 2-45A-4016-1021 Tool setting software $646 2-46A-4016-1035 Inspection Plus software $1,076 2-46A-4016-1039 Tool setting software $431 2-46A-4038-0001-RBE OMP60 probe RBE $1,090 6-5A-4038-0001 OMP60 probe kit $3,803 2-16A-4038-0212 OMP60M/RMP60M LP2 adaptor $618 2-17, 2-19A-4038-0300 OMP60/RMP60 battery cassette $175 6-8A-4038-0301 OMP40/OMP60/RMP60 battery cassette seal $73 6-8A-4038-0302 OMP60/RMP60 outer diaphragm kit $68 6-8A-4038-0303 OMP60/RMP60 shank switch bobbin $165 6-8A-4038-1002-RBE OMP60/RMP60 probe mod RBE $820 6-5A-4038-1002 OMP60M/RMP60M probe module $3,056 2-17, 2-19A-4038-1003-RBE OMP60 transmission module RBE $680 6-5A-4038-1003 OMP60M module $1,170 2-17A-4038-1010 OMP60M/RMP60M 100 mm extension $618 2-17, 2-19A-4038-1027 OMP60M/RMP60M 150 mm extension $801 2-17, 2-19A-4038-1028 OMP60M/RMP60M 200 mm extension $832 2-17, 2-19A-4043-0000 MH20 head (LF) $4,090 1-5A-4043-0024-RBE MH20 head RBE $990 6-3A-4043-0100 MH20 head (SF) $4,090 1-5A-4043-0200 MH20 head (MF) $4,090 1-5A-4043-0300 MH20 head (EF) $4,090 1-5A-4068-0400 CC6 counter card $1,560 1-31A-4071-0001-RBE OMP40 probe RBE $985 6-5A-4071-0001 OMP40 probe kit $3,803 2-14A-4071-0031 MP10 style shank adaptor $171 2-14A-4071-0094 OMP40 pull-up-cone assembly $35 6-8A-4071-0096 OMP40 round battery cap $93 6-8A-4071-1166 OMP40 rectangular battery cassette $120 6-8A-4099-0000 MH20i head (LF) $4,760 1-6A-4099-0022-RBE MH20i head RBE $1,260 6-3A-4099-0100 MH20i head (SF) $4,760 1-6A-4099-0200 MH20i head (MF) $4,760 1-6A-4099-0300 MH20i head (EF) $4,760 1-6A-4113-0001-RBE RMP60 probe RBE $1,455 6-5A-4113-0001 RMP60 probe $5,120 2-18A-4113-0050-RBE RMI RBE $895 6-7A-4113-0050 RMI radio machine interface $2,559 2-18, 2-20A-4113-0303 RMI 30 m extension cable $378 2-18, 2-20A-4113-0304 RMI 50 m extension cable $515 2-18, 2-20A-4113-0305 RMI antenna cover $120 2-18, 2-20A-4113-0306 Sealtite conduit $27 2-14, 2-15, 2-16, 2-18, 2-20, 2-27A-4113-0771 OMP60M/RMP60M probe adaptor $707 2-17, 2-19A-4113-0784 OMP60M/RMP60M 3-way adaptor $1,248 2-17, 2-19A-4113-1003-RBE RMP60 transmission module RBE $870 6-5A-4113-1003 RMP60M module $2,499 2-19A-4114-0082 NC4 access panel 0.2 $22 2-26A-4114-0084 NC4 access panel 0.4 $22 2-26A-4114-0086 NC4 access panel 0.6 $22 2-26A-4114-3100 NC4 adjuster pack $228 2-26A-4114-4110 NC4 tool kit $43 2-26A-4114-4400 NC4 spacer plate $102 2-26A-4114-5060 NC4 S800 with NCi-4 kit $4,747 2-25



C-C

ON, INC.

7-15

Alp

ha-n

umer

ic p

rice

list


A-4114-5065 NC4 S1500 with NCi-4 kit $4,747 2-25A-4114-5070 NC4 S2000 with NCi-4 kit $4,747 2-25A-4114-5075 NC4 S3000 with NCi-4 kit $4,747 2-25A-4114-5080 NC4 S5000 with NCi-4 kit $4,747 2-25A-4114-5200-RBE NC4 generic TX RBE $950 6-6A-4114-5300-RBE NC4 generic RX RBE $950 6-6A-4114-8000 NC4 set-up tool $342 2-26A-4129-0003-RBE Procera® Piccolo RBE $2,310 6-7A-4178-0440 TRS2 replacement air cap $26 2-28A-4179-0450 NC3 air nozzle kit $81 2-24A-4179-1100 NC3 fi xed system kit $4,531 2-24A-4179-1500-RBE NC3 system RBE $1,450 6-6A-4179-1500 NC3 fi xed unit $3,631 2-24A-4179-1501 NC3 45° mounting bracket $97 2-24A-4179-1600 NC3 air regulator kit $443 2-24A-4192-0001 MRS kit 1 $1,205 1-46A-4192-0002 MRS kit 2 $1,292 1-46A-4192-0003 MRS kit 3 $1,400 1-46A-4192-0020 MRS heavy duty leg kit $364 1-47A-4192-0050 MRS 400 mm rail $205 1-46A-4192-0051 MRS 600 mm rail $269 1-46A-4192-0052 MRS 1000 mm rail $376 1-46A-4192-0053 MRS 125 mm leg $102 1-47A-4192-0055 MRS leg and foot adaptor $151 1-47A-4192-0056 MRS fi xed foot $151 1-47A-4192-0058 MRS step back adaptor $151 1-47A-4192-0061 MRS 62.5 mm leg $86 1-47A-4192-0702 MRS adjustable foot plate $376 1-47A-5000-0001 M2 comprehensive stylus kit $2,808 5-53A-5000-0002 M2 stylus enhancement kit $1,032 5-54A-5000-3212 M4 tool datuming stylus $107 5-26A-5000-3551 M3 ruby stylus $32 5-14, 5-59, 5-60A-5000-3552 M3 ruby stylus $32 5-14, 5-59, 5-60A-5000-3553 M3 ruby stylus $32 5-14, 5-59, 5-60A-5000-3554 M3 ruby stylus $32 5-14, 5-59, 5-60A-5000-3603 M2 ruby stylus $25 5-7, 5-53, 5-56, 5-57, 5-58A-5000-3604 M2 ruby stylus $22 5-7, 5-53, 5-56, 5-57, 5-58A-5000-3609 M2 star stylus center $71 5-11A-5000-3611 M2 disc stylus $70 5-11, 5-53, 5-56, 5-57, 5-58A-5000-3613 M2 disc stylus $105 5-11A-5000-3614 M2 hemispherical stylus $279 5-13, 5-53, 5-57, 5-58A-5000-3615 M3 disc stylus $74 5-19, 5-59, 5-60A-5000-3626 M2 star stylus $133 5-10, 5-53, 5-56A-5000-3627 M2 5-way stylus center $43 5-50, 5-53, 5-57, 5-58, 5-64, 5-88A-5000-3709 M4 ruby stylus $97 5-21A-5000-3712 M4 ruby stylus $109 5-22A-5000-4154 M2 ruby stylus $22 5-7, 5-53, 5-57, 5-58A-5000-4155 M2 ruby stylus $36 5-7, 5-53, 5-57, 5-58A-5000-4156 M2 ruby stylus $39 5-7, 5-53, 5-57, 5-58A-5000-4158 M2 ruby stylus $72 5-7, 5-53, 5-57, 5-58A-5000-4160 M2 ruby stylus $25 5-7, 5-53, 5-56, 5-57, 5-58A-5000-4161 M2 ruby stylus $25 5-7, 5-53, 5-57, 5-58A-5000-4187 M2 disc stylus $99 5-11A-5000-6350 M4 ruby stylus $70 5-20A-5000-6352 M4 ruby stylus $70 5-20A-5000-6403 M4 tool datuming stylus $107 5-26A-5000-6462 M4 star stylus $94 5-24A-5000-6701 M4 tool datuming stylus $107 5-26A-5000-6713 M4 tool datuming stylus $128 5-26A-5000-6731 M4 ruby stylus $70 5-20A-5000-7098 M4 star stylus $89 5-24A-5000-7521 M4 ruby stylus $70 5-21A-5000-7522 M4 ruby stylus $79 5-22A-5000-7523 M4 ruby stylus $88 5-22A-5000-7534 M2 stylus knuckle $59 5-50, 5-53, 5-56, 5-57, 5-58, 5-88A-5000-7545 M4 ruby stylus $87 5-20, 5-64A-5000-7547 M4 ruby stylus $76 5-20, 5-64A-5000-7549 M4 ruby stylus $45 5-20A-5000-7551 M4 ruby stylus $45 5-20, 5-64A-5000-7553 M4 ruby stylus $45 5-20



C-C

ON, INC.



7-16

Alp

ha-n

umer

ic p

rice

list

A-5000-7555 M4 ruby stylus $48 5-20A-5000-7557 M4 ruby stylus $67 5-20A-5000-7596 M4 disc stylus $114 5-24A-5000-7597 M4 disc stylus $109 5-24A-5000-7598 M4 disc stylus $119 5-24A-5000-7606 M3 ruby stylus $32 5-14A-5000-7610 M3 5-way stylus center $50 5-50, 5-59, 5-60, 5-64A-5000-7612 M3 disc stylus $126 5-19A-5000-7616 M3 stylus knuckle $59 5-50, 5-59, 5-60, 5-88A-5000-7629 M2 star stylus $139 5-10, 5-53A-5000-7630 M3 ruby stylus $32 5-14, 5-63A-5000-7632 M3 ruby stylus $98 5-14A-5000-7648 M3 ruby stylus $32 5-14, 5-59, 5-60A-5000-7650 Machine checking gage stylus $85 3-21A-5000-7669 M3 disc stylus $134 5-19, 5-59, 5-60A-5000-7676 M4 digitizing stylus kit $864 5-29A-5000-7677 M4 digitizing stylus kit $864 5-29A-5000-7710 M4 digitizing stylus $85 5-29A-5000-7711 M4 digitizing stylus $85 5-29A-5000-7712 M4 digitizing stylus $87 5-29A-5000-7713 M4 digitizing stylus $89 5-29A-5000-7714 M4 digitizing stylus $90 5-29A-5000-7715 M4 digitizing stylus $91 5-29A-5000-7718 M4 digitizing stylus $85 5-29A-5000-7719 M4 digitizing stylus $85 5-29A-5000-7720 M4 digitizing stylus $87 5-29A-5000-7721 M4 digitizing stylus $89 5-29A-5000-7722 M4 digitizing stylus $90 5-29A-5000-7723 M4 digitizing stylus $91 5-29A-5000-7724 M4 digitizing stylus $101 5-29A-5000-7725 M4 digitizing stylus $104 5-29A-5000-7727 M4 stylus extension $154 5-28A-5000-7751 M4/M3 stylus adaptor $60 5-51, 5-64A-5000-7752 M4/M3 stylus adaptor $91 5-51, 5-64A-5000-7753 M4/M3 stylus adaptor $104 5-51, 5-64A-5000-7754 M4 stylus extension $51 5-28, 5-64A-5000-7755 M4 stylus extension $60 5-28, 5-64A-5000-7792 M4 5-way stylus center $60 5-50, 5-64A-5000-7795 M4 ruby stylus $108 5-21, 5-64A-5000-7796 M4 ruby stylus $135 5-22, 5-64A-5000-7800 M2 ruby stylus $111 5-7, 5-53, 5-54A-5000-7801 M2 ruby stylus $84 5-7, 5-53, 5-54A-5000-7802 M2 ruby stylus $22 5-7, 5-53, 5-54A-5000-7803 M2 ruby stylus $22 5-7, 5-53, 5-54A-5000-7804 M2 ruby stylus $25 5-7, 5-53, 5-54A-5000-7805 M2 ruby stylus $90 5-7, 5-53, 5-54A-5000-7806 M2 ruby stylus $32 5-7, 5-53, 5-54, 5-56, 5-57, 5-58A-5000-7807 M2 ruby stylus $22 5-7, 5-53, 5-54, 5-56, 5-57, 5-58A-5000-7808 M2 ruby stylus $49 5-7, 5-53, 5-54A-5000-7809 M2 disc stylus $89 5-11, 5-53, 5-54, 5-56, 5-57, 5-58A-5000-7810 M2 disc stylus $89 5-11, 5-53, 5-54, 5-57, 5-58A-5000-7811 M2 star stylus $138 5-10, 5-53, 5-54A-5000-7812 M2 cylinder stylus $108 1-24, 5-11, 5-53, 5-54A-5000-7813 M2 pointer stylus $67 5-13, 5-53, 5-54A-5000-7814 M4 hollow ball stylus $343 5-19, 5-64A-5000-7829 M4 stylus kit (TP7M use) $1,614 5-64A-5000-8156 M4 ruby stylus $170 5-22A-5000-8395 M2 4-way stylus center $64 5-50A-5000-8663 M2 ruby stylus $84 5-8A-5000-8876 M2 cylinder stylus $185 5-11A-5000-8877 M2 cylinder stylus $270 5-11A-5000-9302 M5/Ø8.0 stylus adaptor $62 5-51A-5000-9303 M5/Ø10.0 stylus adaptor $62 5-51A-5000-9685 M4 tungsten carbide stylus $159 5-30A-5000-9697 M4 tungsten carbide stylus $147 5-30A-5000-9761 M4 ruby stylus $150 5-22A-5000-9902 M2 rotary stylus knuckle $70 5-50, 5-90A-5003-0033 M2 ruby stylus $55 5-7A-5003-0034 M2 ruby stylus $55 5-7A-5003-0035 M2 ruby stylus $38 5-8



C-C

ON, INC.

7-17

Alp

ha-n

umer

ic p

rice

list


A-5003-0036 M2 ruby stylus $44 5-8A-5003-0037 M2 ruby stylus $49 5-9A-5003-0038 M2 ruby stylus $44 5-8A-5003-0039 M2 ruby stylus $49 5-9A-5003-0040 M2 ruby stylus $44 5-8A-5003-0041 M2 ruby stylus $49 5-9A-5003-0042 M2 ruby stylus $44 5-9A-5003-0043 M2 ruby stylus $44 5-8A-5003-0044 M2 ruby stylus $49 5-9A-5003-0045 M2 ruby stylus $49 5-9A-5003-0046 M2 ruby stylus $44 5-8A-5003-0047 M2 ruby stylus $49 5-8A-5003-0048 M2 ruby stylus $53 5-9A-5003-0049 M2 ruby stylus $53 5-9A-5003-0050 M3 ruby stylus $44 5-14A-5003-0051 M3 ruby stylus $49 5-14A-5003-0052 M3 ruby stylus $44 5-14A-5003-0053 M3 ruby stylus $49 5-15A-5003-0054 M3 ruby stylus $44 5-14A-5003-0055 M3 ruby stylus $44 5-14A-5003-0056 M3 ruby stylus $49 5-15A-5003-0057 M3 ruby stylus $44 5-14A-5003-0058 M3 ruby stylus $49 5-15A-5003-0059 M3 ruby stylus $53 5-15A-5003-0060 M3 ruby stylus $44 5-15A-5003-0061 M3 ruby stylus $53 5-15A-5003-0062 M3 ruby stylus $53 5-15A-5003-0063 M3 ruby stylus $53 5-15A-5003-0064 M2 ruby stylus $70 5-9A-5003-0065 M2 ruby stylus $70 5-9A-5003-0066 M2 ruby stylus $90 5-9A-5003-0067 M3 ruby stylus $70 5-15A-5003-0068 M3 ruby stylus $70 5-15A-5003-0069 M3 ruby stylus $70 5-15, 5-63A-5003-0070 M2 stylus extension $58 5-12A-5003-0071 M2 stylus extension $58 5-12A-5003-0072 M2 stylus extension $60 5-12A-5003-0073 M2 cylinder stylus $130 5-11A-5003-0074 M2 parallel stylus $87 5-12A-5003-0075 M3 stylus extension $58 5-18A-5003-0076 M3 star stylus $140 5-18A-5003-0077 M3 star stylus $140 5-18A-5003-0233 M4 ruby stylus $70 5-21A-5003-0235 M4 ruby stylus $82 5-21A-5003-0236 M4 ruby stylus $86 5-21A-5003-0470 M2 ruby stylus $86 5-9A-5003-0577 M2 ruby stylus $107 5-7A-5003-0587 M4 stylus extension $165 5-28A-5003-0661 Crash protection device $25 2-29, 5-25A-5003-0824 M5 stylus for Zeiss $88 5-74A-5003-0826 M5 stylus for Zeiss $113 5-74A-5003-0827 M5 stylus for Zeiss $124 5-74A-5003-0854 5-way stylus center $81 5-50A-5003-0855 5-way stylus center $88 5-50A-5003-0856 M5/M4 stylus adaptor $29 5-51A-5003-0938 M2 ruby stylus $78 5-8, 5-87A-5003-1029 M2 ruby stylus $98 5-8A-5003-1075 M4 ruby stylus $289 5-22A-5003-1208 M2 parallel stylus $220 5-12A-5003-1210 M2 parallel stylus $190 5-12A-5003-1218 M2 parallel stylus $160 5-12A-5003-1219 M2 parallel stylus $85 5-12A-5003-1228 M2 parallel stylus $85 5-12A-5003-1255 M4 ruby stylus $274 5-22A-5003-1258 M2 parallel stylus $155 5-12A-5003-1325 M2 ruby stylus $77 5-7A-5003-1345 M2 ruby stylus $105 5-7A-5003-1358 M4 ruby stylus $145 5-22A-5003-1370 M2 ruby stylus $45 5-8A-5003-1436 M4 ruby stylus $128 5-21



C-C

ON, INC.



7-18

Alp

ha-n

umer

ic p

rice

list

A-5003-1896 M2 ruby stylus $72 5-8A-5003-2280 M2 stylus extension $97 5-13, 5-55A-5003-2281 M2 stylus extension $101 5-13, 5-55A-5003-2282 M2 stylus extension $105 5-13, 5-55A-5003-2283 M2 stylus extension $110 5-13, 5-55A-5003-2285 M2 ruby stylus $105 5-9, 5-55A-5003-2286 M2 ruby stylus $110 5-9, 5-55A-5003-2287 M2 ruby stylus $115 5-9, 5-55A-5003-2289 M2 ruby stylus $154 5-10A-5003-2290 M2 ruby stylus $163 5-10A-5003-2291 M2 ruby stylus $172 5-10A-5003-2300 S20 stylus tool $48 1-51, 5-52, 5-55A-5003-2310 M2 high performance stylus kit $710 1-23, 5-55A-5003-2764 M4 ruby stylus $103 5-21A-5003-2932 M4 ruby stylus $86 5-20A-5003-3545 M2 parallel stylus $160 5-12A-5003-3584 M2 ruby stylus $100 5-8A-5003-3680 M4 ruby stylus $96 5-21A-5003-3822 M2 ruby stylus $72 5-8, 5-87A-5003-3877 M2 ruby stylus $100 5-8A-5003-4011 M2 star stylus $249 5-10A-5003-4177 M2 ruby stylus $84 5-8A-5003-4179 M4 ruby stylus $425 5-23A-5003-4241 M2 ruby stylus $100 5-8A-5003-4686 M3 rotary stylus knuckle $130 5-50A-5003-4689 M4 rotary stylus knuckle $140 5-50A-5003-4697 M2 stylus knuckle $108 5-50A-5003-4779 M2 ruby stylus $86 5-8A-5003-4780 M2 ruby stylus $92 5-8A-5003-4781 M2 ruby stylus $104 5-8A-5003-4782 M2 ruby stylus $109 5-8A-5003-4784 M2 ruby stylus $135 5-10A-5003-4785 M2 ruby stylus $144 5-10A-5003-4786 M2 ruby stylus $152 5-10A-5003-4787 M2 star stylus $211 5-10A-5003-4788 M2 star stylus $221 5-10A-5003-4789 M2 star stylus center $125 5-11A-5003-4790 M2 star stylus center $163 5-11A-5003-4791 M2 star stylus center $125 5-11A-5003-4792 M4 ruby stylus $77 5-20A-5003-4793 M4 ruby stylus $86 5-20A-5003-4794 M4 ruby stylus $86 5-20A-5003-4795 M4 ruby stylus $92 5-20A-5003-4796 M4 ruby stylus $92 5-20A-5003-4797 M4 ruby stylus $92 5-21A-5003-4799 M4 ruby stylus $96 5-21A-5003-4800 M4 ruby stylus $100 5-21A-5003-4801 M4 ruby stylus $100 5-21A-5003-4802 M4 ruby stylus $115 5-21A-5003-4860 M3 ruby stylus $158 5-16, 5-61, 5-62A-5003-4861 M3 ruby stylus $168 5-16A-5003-4862 M3 ruby stylus $180 5-16A-5003-4863 M3 ruby stylus $190 5-16, 5-62A-5003-4864 M3 stylus extension $102 5-18A-5003-4865 M3 stylus extension $110 5-18A-5003-5061 M3 silicon nitride stylus $52 5-46A-5003-5171 TS27R retrofi t stylus kit $35 2-29A-5003-5201 M5 ruby stylus $92 5-31A-5003-5202 M5 ruby stylus $79 5-31A-5003-5203 M5 ruby stylus $79 5-31A-5003-5204 M5 ruby stylus $71 5-32A-5003-5205 M5 ruby stylus $61 5-32A-5003-5206 M5 ruby stylus $61 5-32A-5003-5207 M5 ruby stylus $61 5-32A-5003-5208 M5 ruby stylus $61 5-32A-5003-5209 M5 ruby stylus $67 5-32A-5003-5210 M5 ruby stylus $67 5-32A-5003-5211 M5 ruby stylus $96 5-31A-5003-5212 M5 ruby stylus $86 5-31A-5003-5213 M5 ruby stylus $86 5-31



C-C

ON, INC.

7-19

Alp

ha-n

umer

ic p

rice

list


A-5003-5214 M5 ruby stylus $77 5-32A-5003-5215 M5 ruby stylus $77 5-32A-5003-5216 M5 ruby stylus $67 5-32A-5003-5217 M5 ruby stylus $67 5-32A-5003-5218 M5 ruby stylus $67 5-32, 5-65, 5-66, 5-67, 5-68A-5003-5219 M5 ruby stylus $72 5-32A-5003-5220 M5 ruby stylus $77 5-32A-5003-5221 M5 ruby stylus $96 5-32A-5003-5222 M5 ruby stylus $86 5-32A-5003-5223 M5 ruby stylus $86 5-32A-5003-5224 M5 ruby stylus $86 5-32A-5003-5225 M5 ruby stylus $125 5-31A-5003-5226 M5 ruby stylus $115 5-31A-5003-5227 M5 ruby stylus $115 5-31A-5003-5228 M5 ruby stylus $109 5-33A-5003-5229 M5 ruby stylus $105 5-33A-5003-5230 M5 ruby stylus $96 5-33A-5003-5231 M5 ruby stylus $77 5-33A-5003-5232 M5 ruby stylus $86 5-33A-5003-5233 M5 ruby stylus $77 5-33A-5003-5234 M5 ruby stylus $86 5-33, 5-67A-5003-5235 M5 ruby stylus $86 5-33A-5003-5236 M5 ruby stylus $86 5-33, 5-65, 5-66, 5-67, 5-68A-5003-5237 M5 ruby stylus $96 5-33A-5003-5238 M5 ruby stylus $105 5-33, 5-68A-5003-5239 M5 ruby stylus $115 5-33A-5003-5240 M5 ruby stylus $134 5-31A-5003-5241 M5 ruby stylus $125 5-31A-5003-5242 M5 ruby stylus $115 5-31A-5003-5243 M5 ruby stylus $115 5-34A-5003-5244 M5 ruby stylus $105 5-34A-5003-5248 M5 ruby stylus $96 5-34A-5003-5249 M5 ruby stylus $105 5-34A-5003-5250 M5 ruby stylus $125 5-34A-5003-5251 M5 ruby stylus $115 5-34, 5-65, 5-66, 5-67, 5-68A-5003-5252 M5 ruby stylus $125 5-34A-5003-5253 M5 ruby stylus $125 5-35A-5003-5254 M5 ruby stylus $144 5-36A-5003-5255 M5 ruby stylus $125 5-35A-5003-5256 M5 ruby stylus $144 5-35A-5003-5257 M5 ruby stylus $125 5-35A-5003-5258 M5 ruby stylus $144 5-36A-5003-5259 M5 ruby stylus $134 5-35A-5003-5260 M5 ruby stylus $153 5-36A-5003-5261 M5 ruby stylus $144 5-35, 5-67A-5003-5262 M5 ruby stylus $163 5-36, 5-65, 5-66, 5-67, 5-68A-5003-5263 M5 ruby stylus $153 5-35A-5003-5264 M5 ruby stylus $173 5-36A-5003-5265 M5 ruby stylus $230 5-37A-5003-5266 M5 ruby stylus $249 5-37A-5003-5267 M5 ruby stylus $269 5-37A-5003-5268 M5 ruby stylus $326 5-37A-5003-5269 M5 ruby stylus $345 5-37A-5003-5270 M5 ruby stylus $364 5-37A-5003-5271 M5 ruby stylus $422 5-38A-5003-5272 M5 ruby stylus $441 5-38A-5003-5273 M5 ruby stylus $460 5-38A-5003-5275 M5 hemispherical stylus $225 5-45A-5003-5276 M5 hemispherical stylus $225 5-45, 5-67, 5-68A-5003-5277 M5 hemispherical stylus $300 5-45A-5003-5278 M5 rotary stylus knuckle $72 5-50, 5-67A-5003-5279 M5 rotary stylus knuckle $86 5-50, 5-68A-5003-5288 M5 disc stylus $125 5-45, 5-67, 5-68A-5003-5289 M5 disc stylus $134 5-45, 5-67A-5003-5290 M5 disc stylus $144 5-45, 5-68A-5003-5291 M5 disc stylus $163 5-45A-5003-5676 M5 stylus bolt $18 5-52, 5-68A-5003-5677 M5 stylus bolt $18 5-52, 5-66, 5-67A-5003-5678 M5 - M2 stylus bolt $18 5-52A-5003-5679 M5 - M2 stylus bolt $18 5-52



C-C

ON, INC.



7-20

Alp

ha-n

umer

ic p

rice

list

A-5003-5680 M5 stylus cube $77 5-65, 5-66, 5-67A-5003-5681 M5 stylus cube $101 5-68A-5003-5683 M5 - M2 stylus cube $86 5-52A-5003-5684 M5 - M2 stylus cube $101 5-52A-5003-5723 M3 silicon nitride stylus $48 5-46A-5003-5724 M3 silicon nitride stylus $100 5-46A-5003-5725 M3 silicon nitride stylus $132 5-46A-5003-5726 M3 silicon nitride stylus $221 5-46A-5003-5727 M3 silicon nitride stylus $230 5-46A-5003-5728 M4 silicon nitride stylus $71 5-47A-5003-5729 M4 silicon nitride stylus $63 5-47A-5003-5730 M4 silicon nitride stylus $221 5-47A-5003-5731 M4 silicon nitride stylus $240 5-47A-5003-5732 M5 silicon nitride stylus $86 5-47A-5003-5733 M5 silicon nitride stylus $94 5-47, 5-66, 5-67, 5-68A-5003-5734 M5 silicon nitride stylus $134 5-47A-5003-5735 M5 silicon nitride stylus $188 5-47A-5003-5736 M3 zirconia stylus $48 5-48A-5003-5737 M3 zirconia stylus $52 5-48A-5003-5738 M3 zirconia stylus $100 5-48A-5003-5739 M3 zirconia stylus $132 5-48A-5003-5740 M3 zirconia stylus $221 5-48A-5003-5741 M3 zirconia stylus $230 5-48A-5003-5742 M4 zirconia stylus $71 5-49A-5003-5743 M4 zirconia stylus $63 5-49A-5003-5744 M4 zirconia stylus $221 5-49A-5003-5745 M4 zirconia stylus $240 5-49A-5003-5746 M5 zirconia stylus $86 5-49A-5003-5747 M5 zirconia stylus $94 5-49A-5003-5748 M5 zirconia stylus $134 5-49A-5003-5749 M5 zirconia stylus $188 5-49A-5003-5909 M5 stylus kit - comprehensive $3,760 5-67A-5003-5910 M5 stylus kit - gen purpose $2,575 5-68A-5003-5911 M5 stylus kit - standard $1,236 5-66A-5003-5912 M5 stylus extension kit 11 mm $1,475 5-69A-5003-5913 M5 stylus extension kit 20 mm $2,065 5-70A-5003-6134 M5 stylus tool $21 5-39, 5-52, 5-65, 5-66, 5-67, 5-68, 5-69A-5003-6135 M5 stylus tool $21 5-39, 5-52, 5-68, 5-70A-5003-6151 M3 stylus kit $435 5-61A-5003-6152 M2 stylus kit $455 5-61A-5003-6153 M3 stylus kit $515 5-62A-5003-6168 M5 stylus kit SP80 $900 5-65A-5003-6510 M4 ruby stylus $145 2-15, 5-23A-5003-6511 M4 ruby stylus $274 2-15, 5-23A-5003-6512 M4 ruby stylus $289 2-15, 5-23A-5003-7054 M3 ruby stylus $301 5-17, 5-63A-5003-7055 M3 ruby stylus $301 5-17, 5-63A-5003-7056 M3 ruby stylus $275 5-17, 5-63A-5003-7057 M3 ruby stylus $275 5-17, 5-63A-5003-7098 M3 disc stylus $289 5-19A-5003-7103 M4 tungsten carbide stylus $79 5-30A-5003-7104 M4 tungsten carbide stylus $88 5-30A-5003-7142 M4 tungsten carbide stylus $70 5-30A-5003-7306 M4 ruby stylus $128 2-15, 5-23A-5003-7445 M3 ruby stylus $275 5-17A-5003-7446 M3 ruby stylus $301 5-17A-5003-7447 M3 ruby stylus $301 5-17A-5003-7673 Stylus for Faro arms $150 5-71A-5003-7674 Stylus for Faro arms $150 5-71A-5003-7675 Stylus for Faro arms $150 5-71A-5003-7676 Stylus for Faro arms $150 5-71A-5003-7677 Stylus for Faro arms $150 5-71A-5003-7678 Stylus for Faro arms $146 5-71A-5003-7679 Stylus for Faro arms $146 5-71A-5003-8124 M3 stylus kit $1,200 5-63A-5036-0005-RBE ACR3 rack RBE $2,650 6-4A-5036-0005 ACR3 4 port rack $9,589 1-46A-5036-0049 ACR1 short port replacement kit $255 1-45, 6-8A-5069-0001-RBE OMP400 RBE $1,395 6-5



C-C

ON, INC.

7-21

Alp

ha-n

umer

ic p

rice

list


A-5069-0001 OMP400 probe kit $4,564 2-15A-5132-1500-RBE NC2 system RBE $995 6-6A-5191-0049 OMI-2 optical receiver $1,582 2-14, 2-15, 2-16, 2-27, 2-44A-5191-0050-RBE OMI-2 RBE $760 6-7A-5191-0050 OMI-2 optical receiver $1,664 2-44A-5226-0007 Pro-E CAD importer $1,500 2-48A-5226-0008 Catia CAD importer $2,000 2-48A-5226-0009 UG/NX CAD importer $1,500 2-48A-5226-0010 ACIS CAD importer $1,000 2-48A-5226-0011 Solidworks CAD importer $1,500 2-48A-5226-0012 Inventor CAD importer $1,500 2-48A-5259-1000 NCi-4 interface $226 2-24, 2-26, 2-43A-5288-0001-RBE Procera® Forte RBE $6,138 6-7A-5312-0001-RBE RMP600 RBE $1,750 6-5A-5312-0001 RMP600 probe kit $7,000 2-20A-5369-1000 Renishaw OMV $6,500 2-49A-5369-1100 OMV Pro software $12,000 2-49A-5369-3001 OMV Fanuc post processor $300 2-49A-5369-3002 OMV Haas post processor $300 2-49A-5369-3003 OMV Siemens 840D post processor $300 2-49A-5369-3004 OMV Heidenhain I530 post processor $300 2-49A-5369-3005 OMV Mazak post processor $300 2-49A-5369-3008 OMV Mori Seiki post processor $300 2-49A-5369-3009 OMV Makino post processor $300 2-49A-5369-3010 OMV Yasnac post processor $300 2-49A-5369-3011 OMV Hitachi Seiki post processor $300 2-49A-5369-3016 OMV Okuma post processor $300 2-49A-5369-4000-DNA OMV Pro fi rst year maintenance $2,800 2-49A-5369-4000 OMV fi rst year maintenance $750 2-49A-5369-4010-DNA OMV Pro second year maintenance $1,800 2-49A-5369-4020-DNA OMV Pro multi-axis module annual maintenance $360 2-49A-5369-4020 OMV multi-axis module annual maintenance $360 2-49A-5369-4100-DNA OMV Pro multi-axis module $3,000 2-49A-5369-4100 OMV multi-axis module $3,000 2-49A-5369-5001-DNA OMV Pro Parasolid CAD importer $1,500 2-50A-5369-5001 OMV Parasolid CAD importer $1,500 2-50A-5369-5002-DNA OMV Pro SDRC CAD importer $1,500 2-50A-5369-5002 OMV SDRC CAD importer $1,500 2-50A-5369-5003-DNA OMV Pro ProE Wildfi re CAD importer $1,500 2-50A-5369-5003 OMV ProE Wildfi re CAD importer $1,500 2-50A-5369-5007-DNA OMV Pro Solid Edge CAD importer $1,500 2-50A-5369-5007 OMV Solid Edge CAD importer $1,500 2-50A-5369-5008-DNA OMV Pro Solid Works CAD importer $1,500 2-50A-5369-5008 OMV Solid Works CAD importer $1,500 2-50A-5369-5009-DNA OMV Pro Catia V5 CAD importer $1,500 2-50A-5369-5009 OMV Catia V5 CAD importer $1,500 2-50A-5369-5010-DNA OMV Pro Cimatron CAD importer $1,500 2-50A-5369-5010 OMV Cimatron CAD importer $1,500 2-50A-5400-#### RTP20 rack kit $7,200 1-7A-5400-8### RTP20 non-rack kit $6,300 1-7A-5401-2001-RBE OTS RBE $900 6-6A-5401-2001 OTS ½AA probe kit $2,271 2-27A-5439-0049 OMI-2T optical receiver $1,582 2-14, 2-15, 2-16, 2-27, 2-44A-5439-0050-RBE OMI-2T RBE $760 6-7A-5439-0050 OMI-2T optical receiver $1,664 2-44A-5450-0400-RBE(TRS2) TRS2 RBE $610 6-6A-5450-0400 TRS2 probe only $2,008 2-28A-5500-1000 HSI interface for MP250 $500 2-32A-5500-1600 MP250 probe kit $4,420 2-32A-5500-1710 FS1 adjustable female socket for MP250 $226 2-32A-5500-1810 FS2 fi xed female socket for MP250 $226 2-32A-5514-2001 OTS AA probe kit $2,271 2-27A-5555-0001 M5 cone stylus for Zeiss $82 5-72A-5555-0002 M5 cone stylus for Zeiss $90 5-72A-5555-0003 M5 cone stylus for Zeiss $90 5-72A-5555-0004 M5 cone stylus for Zeiss $82 5-72A-5555-0005 M5 cone stylus for Zeiss $100 5-72A-5555-0006 M5 cone stylus for Zeiss $100 5-72A-5555-0007 M5 cone stylus for Zeiss $95 5-72A-5555-0008 M5 cone stylus for Zeiss $82 5-72



C-C

ON, INC.



7-22

Alp

ha-n

umer

ic p

rice

list

A-5555-0009 M5 cone stylus for Zeiss $86 5-72A-5555-0010 M5 cone stylus for Zeiss $88 5-72A-5555-0011 M5 cone stylus for Zeiss $100 5-72A-5555-0012 Cone adaptor for Zeiss $115 5-72A-5555-0013 Cone adaptor for Zeiss $29 5-72A-5555-0014 Cone adaptor for Zeiss $28 5-72A-5555-0015 Holder with cone for Zeiss $47 5-72A-5555-0016 Holder with cone for Zeiss $47 5-72A-5555-0017 Holder with cone for Zeiss $47 5-72A-5555-0018 M5 stylus for Zeiss $35 5-73A-5555-0019 M5 stylus for Zeiss $37 5-73A-5555-0020 M5 stylus for Zeiss $38 5-73A-5555-0021 M5 stylus for Zeiss $38 5-73A-5555-0022 M5 stylus for Zeiss $42 5-73A-5555-0023 M5 stylus for Zeiss $48 5-73A-5555-0024 M5 stylus for Zeiss $43 5-73A-5555-0025 M5 stylus for Zeiss $57 5-73A-5555-0026 M5 stylus for Zeiss $56 5-73A-5555-0027 M5 stylus for Zeiss $47 5-73A-5555-0028 M5 stylus for Zeiss $48 5-73A-5555-0029 M5 stylus for Zeiss $49 5-73A-5555-0030 M5 stylus for Zeiss $60 5-73A-5555-0031 M5 stylus for Zeiss $67 5-73A-5555-0032 M5 stylus for Zeiss $60 5-73A-5555-0033 M5 stylus for Zeiss $62 5-73A-5555-0034 M5 stylus for Zeiss $65 5-73A-5555-0035 M5 stylus for Zeiss $69 5-73A-5555-0036 M5 stylus for Zeiss $86 5-73A-5555-0037 M5 stylus for Zeiss $69 5-73A-5555-0038 M5 stylus for Zeiss $67 5-73A-5555-0039 M5 stylus for Zeiss $79 5-73A-5555-0040 M5 stylus for Zeiss $74 5-73A-5555-0041 M5 stylus for Zeiss $48 5-74A-5555-0042 M5 stylus for Zeiss $48 5-74A-5555-0043 M5 stylus for Zeiss $62 5-74A-5555-0044 M5 stylus for Zeiss $64 5-74A-5555-0045 M5 stylus for Zeiss $70 5-74A-5555-0047 M5 stylus for Zeiss $82 5-74A-5555-0050 M5 stylus for Zeiss $67 5-74A-5555-0051 M5 stylus for Zeiss $64 5-74A-5555-0052 M5 stylus for Zeiss $62 5-74A-5555-0053 M5 stylus for Zeiss $62 5-74A-5555-0054 M5 stylus for Zeiss $52 5-74A-5555-0055 M5 stylus for Zeiss $52 5-74A-5555-0056 M5 stylus for Zeiss $50 5-74A-5555-0057 M5 stylus for Zeiss $50 5-74A-5555-0058 M5 stylus for Zeiss $50 5-74A-5555-0059 M5 stylus for Zeiss $50 5-74A-5555-0060 M5 stylus for Zeiss $50 5-74A-5555-0061 M5 stylus for Zeiss $50 5-74A-5555-0062 M5 stylus for Zeiss $50 5-74A-5555-0063 M5 stylus for Zeiss $50 5-74A-5555-0064 M5 stylus for Zeiss $67 5-74A-5555-0065 M5 stylus for Zeiss $71 5-74A-5555-0066 M5 stylus for Zeiss $71 5-74A-5555-0067 M5 stylus for Zeiss $71 5-74A-5555-0068 M5 stylus for Zeiss $71 5-74A-5555-0069 M5 star stylus for Zeiss $208 5-75A-5555-0070 M5 star stylus for Zeiss $208 5-75A-5555-0071 M5 star stylus for Zeiss $208 5-75A-5555-0072 M5 star stylus for Zeiss $208 5-75A-5555-0073 M5 star stylus for Zeiss $208 5-75A-5555-0074 M5 stylus for Zeiss $115 5-75A-5555-0075 M5 stylus for Zeiss $108 5-75A-5555-0076 M5 stylus for Zeiss $118 5-75A-5555-0077 M5 stylus for Zeiss $176 5-75A-5555-0078 M5 stylus for Zeiss $44 5-75A-5555-0079 M5 stylus for Zeiss $42 5-75A-5555-0080 M5 stylus for Zeiss $43 5-75A-5555-0081 M5 stylus for Zeiss $44 5-75



C-C

ON, INC.

7-23

Alp

ha-n

umer

ic p

rice

list


A-5555-0082 M5 stylus for Zeiss $41 5-75A-5555-0083 M5 stylus for Zeiss $46 5-75A-5555-0084 M5 stylus for Zeiss $49 5-76A-5555-0085 M5 stylus for Zeiss $47 5-76A-5555-0086 M5 stylus for Zeiss $47 5-76A-5555-0087 M5 stylus for Zeiss $45 5-76A-5555-0088 M5 stylus for Zeiss $44 5-76A-5555-0089 Clamping disc for Zeiss styli $23 5-76A-5555-0090 Clamping disc for Zeiss styli $26 5-76A-5555-0091 Slot disc for Zeiss styli $46 5-76A-5555-0092 Slot disc for Zeiss styli $49 5-76A-5555-0093 Pin for Zeiss styli $10 5-76A-5555-0094 Pin for Zeiss styli $10 5-76A-5555-0095 Pin for Zeiss styli $10 5-76A-5555-0096 Pin for Zeiss styli $10 5-76A-5555-0097 Mounting support for Zeiss $89 5-76A-5555-0098 Mounting support for Zeiss $108 5-76A-5555-0099 Rotary adaptor for Zeiss $115 5-77A-5555-0103 Rotary adaptor for Zeiss $150 5-77A-5555-0104 Holder for Zeiss styli $48 5-77A-5555-0105 Holder for Zeiss styli $44 5-77A-5555-0106 Holder for Zeiss styli $44 5-77A-5555-0107 Stylus for Zeiss 3D head $40 5-77A-5555-0108 Stylus for Zeiss 3D head $42 5-77A-5555-0109 Stylus for Zeiss 3D head $40 5-77A-5555-0110 Stylus for Zeiss 3D head $39 5-77A-5555-0111 Stylus for Zeiss 3D head $37 5-77A-5555-0112 M5 stylus for Zeiss $36 5-78A-5555-0113 M5 stylus for Zeiss $28 5-78A-5555-0114 M5 stylus for Zeiss $28 5-78A-5555-0115 M5 stylus for Zeiss $28 5-78A-5555-0116 M5 stylus for Zeiss $28 5-78A-5555-0117 M5 stylus for Zeiss $32 5-78A-5555-0118 Holder for Zeiss swivel styli $57 5-78A-5555-0119 Swivel stylus for Zeiss $53 5-78A-5555-0120 Swivel stylus for Zeiss $49 5-78A-5555-0121 Disc stylus for Zeiss $102 5-78A-5555-0122 Disc stylus for Zeiss $103 5-78A-5555-0123 Disc stylus for Zeiss $157 5-78A-5555-0124 Disc stylus for Zeiss $167 5-78A-5555-0125 M5 stylus extension $84 5-44, 5-68, 5-79A-5555-0126 M5 stylus extension for Zeiss $50 5-79A-5555-0127 M5 stylus extension $67 5-44, 5-68, 5-79A-5555-0128 M5 stylus extension for Zeiss $44 5-79A-5555-0129 M5 stylus extension for Zeiss $44 5-79A-5555-0130 M5 stylus extension for Zeiss $44 5-79A-5555-0131 M5 stylus extension for Zeiss $29 5-79A-5555-0132 M5 stylus extension for Zeiss $29 5-79A-5555-0133 M5 stylus extension for Zeiss $28 5-79A-5555-0134 M5 stylus extension for Zeiss $26 5-79A-5555-0135 M5 stylus extension for Zeiss $25 5-79A-5555-0136 M5 stylus extension $29 5-43, 5-65, 5-66, 5-79A-5555-0137 M5 stylus extension for Zeiss $21 5-79A-5555-0138 M5 stylus extension for Zeiss $21 5-79A-5555-0139 M5 stylus extension for Zeiss $18 5-79A-5555-0140 M5 stylus extension $32 5-43, 5-68, 5-79A-5555-0141 M5 stylus extension for Zeiss $18 5-79A-5555-0142 M5 stylus extension $32 5-43, 5-79A-5555-0143 M5 stylus extension for Zeiss $27 5-79A-5555-0144 M5 stylus extension for Zeiss $24 5-79A-5555-0145 M5 stylus extension for Zeiss $25 5-79A-5555-0146 M5 stylus extension for Zeiss $25 5-79A-5555-0147 M5 stylus extension for Zeiss $28 5-79A-5555-0148 M5 stylus extension for Zeiss $26 5-79A-5555-0149 M5 stylus extension for Zeiss $32 5-79A-5555-0150 M5 stylus extension for Zeiss $38 5-79A-5555-0151 M5 stylus extension for Zeiss $50 5-79A-5555-0152 M5 stylus extension for Zeiss $40 5-79A-5555-0153 M5 stylus extension for Zeiss $53 5-79A-5555-0154 M5 stylus extension for Zeiss $41 5-79



C-C

ON, INC.



7-24

Alp

ha-n

umer

ic p

rice

list

A-5555-0155 M5 stylus extension for Zeiss $56 5-79A-5555-0156 M5 stylus extension for Zeiss $44 5-79A-5555-0157 M5 stylus extension for Zeiss $56 5-79A-5555-0158 M5 stylus extension for Zeiss $44 5-79A-5555-0159 M5 stylus extension for Zeiss $56 5-79A-5555-0160 M5 stylus extension for Zeiss $44 5-79A-5555-0161 M5 stylus extension for Zeiss $58 5-79A-5555-0162 M5 stylus extension for Zeiss $49 5-79A-5555-0163 M5 stylus extension for Zeiss $62 5-79A-5555-0164 M5 stylus extension for Zeiss $52 5-79A-5555-0165 M5 stylus extension for Zeiss $65 5-79A-5555-0166 M5 stylus extension for Zeiss $74 5-79A-5555-0167 M5 stylus extension for Zeiss $77 5-79A-5555-0168 M5 stylus extension for Zeiss $84 5-79A-5555-0189 M5 stylus cube $46 5-52, 5-80A-5555-0190 M5 stylus cube $52 5-52, 5-80A-5555-0191 Cube for Zeiss styli $44 5-80A-5555-0192 Cube for Zeiss styli $54 5-80A-5555-0193 Cube for Zeiss styli $50 5-80A-5555-0194 M5 double stylus cube $122 5-52, 5-80A-5555-0195 Stylus disc for Zeiss $84 5-81A-5555-0196 Stylus disc for Zeiss $85 5-81A-5555-0197 Stylus disc for Zeiss $85 5-81A-5555-0198 Stylus disc for Zeiss $86 5-81A-5555-0199 Stylus disc for Zeiss $88 5-81A-5555-0200 Stylus disc for Zeiss $89 5-81A-5555-0201 Stylus disc for Zeiss $90 5-81A-5555-0202 Stylus disc for Zeiss $107 5-81A-5555-0203 Stylus disc for Zeiss $85 5-81A-5555-0204 Stylus disc for Zeiss $84 5-81A-5555-0205 Stylus disc for Zeiss $86 5-81A-5555-0206 Stylus disc for Zeiss $89 5-81A-5555-0207 Stylus disc for Zeiss $93 5-81A-5555-0208 Stylus disc for Zeiss $96 5-81A-5555-0209 Thread stylus for Zeiss $49 5-81A-5555-0210 Thread stylus for Zeiss $49 5-81A-5555-0211 Thread stylus for Zeiss $49 5-81A-5555-0212 Thread stylus for Zeiss $50 5-81A-5555-0213 Thread stylus for Zeiss $50 5-81A-5555-0214 Thread stylus for Zeiss $51 5-81A-5555-0215 Star stylus for Zeiss $299 5-81A-5555-0216 Pointed stylus for Zeiss $48 5-82A-5555-0217 Cube extension for Zeiss $217 5-82A-5555-0218 Stylus joint for Zeiss $72 5-82A-5555-0219 Stylus joint for Zeiss $72 5-82A-5555-0220 Mounting plate for Zeiss $565 5-82A-5555-0221 Cube bolt for Zeiss $13 5-82A-5555-0222 Cube bolt for Zeiss $11 5-82A-5555-0223 Cube bolt for Zeiss $10 5-82A-5555-0224 Cube bolt for Zeiss $9 5-82A-5555-0225 Cube bolt for Zeiss $9 5-82A-5555-0226 M5/M2 stylus adaptor $15 5-51, 5-83A-5555-0227 M5/M3 stylus adaptor $15 5-51, 5-83A-5555-0228 Adaptor for Zeiss styli $15 5-83A-5555-0229 Adaptor for Zeiss styli $15 5-83A-5555-0230 Adaptor for Zeiss styli $15 5-83A-5555-0231 Adaptor for Zeiss styli $212 5-83A-5555-0232 Adaptor for Zeiss styli $190 5-83A-5555-0233 Stylus tool for Zeiss $9 5-83A-5555-0234 Offset screwdriver for Zeiss $3 5-83A-5555-0235 Offset screwdriver for Zeiss $3 5-83A-5555-0236 Offset screwdriver for Zeiss $3 5-83A-5555-0237 Tool kit for Zeiss $22 5-84A-5555-0238 Stylus tool kit for Zeiss $15 5-84A-5555-0239 Stylus tool for Zeiss $9 5-84A-5555-0240 Stylus tool for Zeiss $9 5-84A-5555-0241 Assortment of screws for Zeiss $20 5-84A-5555-0242 Spring-lock washer kit for Zeiss $5 5-84A-5555-0243 C spanner for Zeiss $10 5-84A-5555-0244 C spanner for Zeiss $12 5-84



C-C

ON, INC.

7-25

Alp

ha-n

umer

ic p

rice

list


A-5555-0249 Adaptor plate $245 5-85A-5555-0250 Adaptor plate $325 5-85A-5555-0251 S-sys adaptor plates (2) $371 5-85A-5555-0252 S-sys adaptor plates (10) $2,803 5-85A-5555-0253 Prismo adaptor plates (2) $379 5-85A-5555-0254 Prismo adaptor plates (10) $1,890 5-85A-5555-0255 Adaptor plate $295 5-86A-5555-0256 Adaptor plate (2) $570 5-86A-5555-0257 Adaptor plate (10) $2,720 5-86A-5555-0258 Prismo Vast adaptor plate $270 5-86A-5555-0259 Prismo Vast adaptor plate (2) $855 5-86A-5555-0260 Prismo Vast adaptor plate (10) $2,510 5-86A-5555-0261 M3 stylus for Zeiss $31 5-86A-5555-0262 M3 stylus for Zeiss $29 5-86A-5555-0263 M3 stylus for Zeiss $29 5-86A-5555-0264 M3 stylus for Zeiss $29 5-86A-5555-0265 M3 stylus for Zeiss $29 5-86A-5555-0266 M3 stylus for Zeiss $29 5-86A-5555-0267 M3 stylus for Zeiss $40 5-86A-5555-0268 M3 stylus for Zeiss $38 5-86A-5555-0269 M3 stylus for Zeiss $37 5-86A-5555-0270 M3 stylus for Zeiss $32 5-86A-5555-0271 M3 stylus for Zeiss $29 5-86A-5555-0272 M3 stylus for Zeiss $31 5-86A-5555-0273 M3 stylus for Zeiss $51 5-86A-5555-0274 M3 stylus for Zeiss $29 5-86A-5555-0275 M3 stylus for Zeiss $30 5-86A-5555-0276 M3 stylus for Zeiss $29 5-86A-5555-0277 M3 stylus for Zeiss $31 5-86A-5555-0278 M2 stylus for Zeiss $29 5-87A-5555-0279 M2 stylus for Zeiss $48 5-87A-5555-0282 M2 stylus for Zeiss $30 5-87A-5555-0283 M2 stylus for Zeiss $32 5-87A-5555-0286 M3 extension for Zeiss $10 5-87A-5555-0287 M3 extension for Zeiss $14 5-87A-5555-0288 M3 extension for Zeiss $18 5-87A-5555-0294 Star stylus for Zeiss $86 5-87A-5555-0295 Star stylus for Zeiss $84 5-87A-5555-0296 M2 stylus for Zeiss $30 5-88A-5555-0297 Disc stylus for Zeiss $74 5-88A-5555-0298 Disc stylus for Zeiss $64 5-88A-5555-0299 Disc stylus for Zeiss $60 5-88A-5555-0300 Disc stylus for Zeiss $112 5-88A-5555-0303 Stylus center for Zeiss $40 5-88A-5555-0306 Stylus adaptor for Zeiss $10 5-89A-5555-0307 RST probe head tool $74 5-89A-5555-0308 M2 stylus for Zeiss $26 5-89A-5555-0309 M2 stylus for Zeiss $36 5-89A-5555-0310 M2 stylus for Zeiss $18 5-89A-5555-0311 M2 stylus for Zeiss $21 5-89A-5555-0312 M2 stylus for Zeiss $22 5-89A-5555-0313 M2 stylus for Zeiss $28 5-89A-5555-0314 M2 stylus for Zeiss $28 5-89A-5555-0315 M2 stylus for Zeiss $28 5-89A-5555-0316 M2 stylus for Zeiss $44 5-89A-5555-0317 M2 pointed stylus for Zeiss $26 5-90A-5555-0318 M2 pointed stylus for Zeiss $28 5-90A-5555-0319 M3 stylus center for Zeiss $49 5-90A-5555-0320 M2 stylus center for Zeiss $29 5-90A-5555-0322 S-sys adaptor plate (1) $260 5-85A-5555-0424 M5 stylus extension $176 5-40, 5-69, 5-80A-5555-0425 M5 stylus extension $164 5-40, 5-80A-5555-0427 M5 stylus extension $227 5-42, 5-80A-5555-0620 M5 stylus extension $141 5-41, 5-80A-5555-0621 M5 stylus extension $156 5-41, 5-80A-5555-0623 M5 stylus extension $145 5-39, 5-67, 5-79A-5555-0642 M5 stylus extension $229 5-40A-5555-0647 M5 stylus extension $135 5-39, 5-79A-5555-0648 M5 stylus extension $139 5-39, 5-67, 5-68, 5-69, 5-79A-5555-0649 M5 stylus extension $141 5-39, 5-79



C-C

ON, INC.



7-26

Alp

ha-n

umer

ic p

rice

list

A-5555-0650 M5 stylus extension $149 5-39, 5-80A-5555-0651 M5 stylus extension $153 5-39, 5-80A-5555-0652 M5 stylus extension $153 5-39, 5-67, 5-68, 5-69, 5-80A-5555-0653 M5 stylus extension $185 5-40, 5-80A-5555-0654 M5 stylus extension $193 5-40, 5-67, 5-69, 5-80A-5555-0655 M5 stylus extension $212 5-40, 5-80A-5555-0656 M5 stylus extension $265 5-40A-5555-0657 M5 stylus extension $145 5-41A-5555-0658 M5 stylus extension $149 5-41, 5-80A-5555-0659 M5 stylus extension $166 5-41, 5-70, 5-80A-5555-0660 M5 stylus extension $174 5-41A-5555-0661 M5 stylus extension $185 5-41, 5-70, 5-80A-5555-0662 M5 stylus extension $198 5-42A-5555-0663 M5 stylus extension $206 5-42, 5-70, 5-80A-5555-0664 M5 stylus extension $248 5-42, 5-70, 5-80A-5555-0665 M5 stylus extension $288 5-42A-5555-0667 M5 stylus extension $330 5-42A-5555-0668 M5 stylus extension $370 5-42A-5555-0669 M5 stylus extension $34 5-43, 5-67, 5-68A-5555-0670 M5 stylus extension $34 5-43, 5-65, 5-66A-5555-0671 M5 stylus extension $58 5-44, 5-68A-8003-0006 Training at customer’s premises $1,925 3-22A-8003-0008 Training at Renishaw Inc $750 3-22A-8003-0181 Angular refl ector $1,894 3-14A-8003-0186 Angular beam splitter $2,520 3-14A-8003-0219 Linear refl ector $494 3-14A-8003-0262 Clamp block $246 3-13A-8003-0440 Linear optics kit $3,110 3-7A-8003-0441 Angular optics kit $3,738 3-7A-8003-0442 Flatness optics kit $3,281 3-8A-8003-0443 Straightness kit short-range $5,174 3-8A-8003-0444 Straightness kit long-range $5,174 3-8A-8003-0447 Optics mounting kit $1,265 3-8A-8003-0478 Alignment target $23 3-14A-8003-0557 Linear beam splitter $2,467 3-14A-8003-0576 Straightness accessory base $291 3-13A-8003-0604 Large retro-refl ector $1,025 3-13A-8003-0665 Squareness optics kit $5,414 3-8A-8003-0717 ML10/EC10 data link cable $122 3-16A-8003-0735 EC10 sensor cable (5 m) $49 3-16A-8003-0814 TPin/out cable $98 3-16A-8003-0832 ML10/EC10 ext. cable (5 m) $122 3-16A-8003-0850 Remote trigger switch $338 3-17A-8003-0942 HP/Renishaw tripod adaptor (A) $95 3-17A-8003-0979 M8 adaptor $105 3-13A-8003-0983 Translation stage $971 3-17A-8003-1005 EC10 sensor cable (10 m) $58 3-16A-8003-1006 EC10 sensor cable (15 m) $70 3-16A-8003-1007 ML10/EC10 ext. cable (10 m) $138 3-16A-8003-1008 ML10/EC10 ext. cable (15 m) $147 3-16A-8003-1304 Swivel mirror $1,360 3-9A-8003-1325 Fixed turning mirror $883 3-9A-8003-1489 RX10 RS232 data cable $171 3-15A-8003-1773 RX10 rotary calibrator $24,026 3-12A-8003-1998 Quarter wave plate $1,533 3-9A-8003-2297 RX10 (high accuracy) $26,190 3-12A-8003-2532 High accuracy angular optics kit $4,298 3-7A-8003-2644 Mahr-Federal 832 amplifi er interface $171 3-15A-8003-2774 Linear/angular optics kit $3,958 3-7A-8003-2824 Lifting table accessory kit $4,140 3-12A-8003-3072 Beam steerer LS350 $1,612 3-9A-8003-3116 DX10 interface $2,567 3-16A-8003-3244 Small linear accessory kit $1,710 3-7A-8003-3720 HP/Renishaw tripod adaptor (B) $86 3-17A-8003-4178 RS232 cable kit $175 3-15A-8003-4182 Linear correction software $751 3-11A-8003-4183 Linear correction software $751 3-11A-8003-4184 Linear correction software $751 3-11A-8003-4185 Linear correction software $751 3-11A-8003-4186 Linear correction software $751 3-11



C-C

ON, INC.

7-27

Alp

ha-n

umer

ic p

rice

list


A-8003-4187 Linear correction software $751 3-11A-8003-4188 Linear correction software $751 3-11A-8003-4190 Linear correction software $2,889 3-11A-8003-4209 Straightness shutter $788 3-9A-8003-4216 EC10 air temperature sensor $755 3-17A-8003-4220 EC10 material temperature sensor $755 3-17A-8003-4270 Long-range linear optics $2,889 3-7A-8003-4500 Locking screw pressure pad $6 3-13A-8003-4501 Locking screw assembly $49 3-13A-8003-BBTC Ballbar training course $1,620 3-22A-8003-LATC Laser training course $1,620 3-22A-8003-STAK Straightness accessory kit $3,461 3-8A-8014-0136 Ballbar center cup assembly $135 3-20A-8014-0139 Center pivot assembly $262 3-20A-8014-0141 Ballbar center ball assembly $140 3-20, 6-8A-8014-0144 150 mm extension bar $238 3-20A-8014-0145 300 m extension bar $322 3-20A-8014-0182 Ballbar ball and mount assembly $140 3-20, 6-8A-8014-0231 50 mm extension bar $198 3-20A-8014-0280 Zerodur calibrator $2,044 3-20A-8014-0286-RBE Ballbar (mechanical assembly only) RBE $2,205 6-8A-8014-0286 Transducer/interface assembly $4,683 3-20A-8014-0417 VTL adaptor kit $217 3-19A-8014-0423 Ballbar cleaning kit $25 6-8A-8014-0501 Small circle accessory kit $1,206 3-19A-8014-0521 Ballbar magnetic tool cup $125 3-20, 6-8A-8014-0522 Ballbar center cup assembly $140 6-8A-8014-0551 Z-axis accessory kit $1,021 3-19A-8014-0591 Printed QC10 user guide $45 3-18A-8014-0623 QC10 ballbar kit (basic) $6,595 3-18A-8014-0631 QC10 ballbar kit (standard) $8,495 3-18A-8014-0670 USB to serial adaptor $135 3-19A-8014-CBBK QC10 ballbar kit (comprehensive) $10,520 3-18A-8014-WSUG Ballbar 5 HPS software upgrade $351 3-18A-9908-0295 Universal tripod $1,246 3-10A-9908-0301 LaserXL calibration software $1,724 3-11A-9908-0302 QuickView XL software $1,075 3-11A-9908-0313 XL-80 base system case $625 3-10A-9908-0314 XL-80 full system case $876 3-10A-9908-0700 XL translation stage $964 3-10A-9908-0760 Magnetic base adaptor $33 3-10A-9908-0765 Tripod converter ML-XL $70 3-10A-9908-0770 Tripod adaptor $29 3-10A-9908-0780 Magnetic base $72 3-8A-9908-0932 XC80 temperature sensor cable (5 m) $135 3-15CBL-USBX-1 USB single port extension cable (5 m) $60 3-15CBL-USBX-2 USB dual port extension cable (5 m) $80 3-15LP2-LTO2S-KIT LP2/LTO2S hardware only kit $7,050 2-30LP2-LTO2S-S LP2/LTO2S/S retro kit Call for price 2-30LP2-LTO2T-KIT LP2/LTO2T hardware only kit $6,829 2-30LP2-LTO2T-S LP2/LTO2T/S retro kit Call for price 2-30LP2-LTO3T-KIT LP2/LTO3T hardware only kit $7,057 2-30LP2-LTO3T-S LP2/LTO3T/S retro kit Call for price 2-30M-1007-0023 MCG pillar (76 mm) $69 3-21M-1007-0024 MCG pillar (127 mm) $119 3-21M-1007-0025 MCG pillar (235 mm) $151 3-21M-1018-0041 Mounting plate (small) $18 1-43M-1018-0042 Mounting plate (large) $28 1-43M-1034-0014 Datum sphere fi xing stud $27 1-49M-1034-0015 Datum sphere fi xing stud $27 1-49M-1034-0016 Datum sphere fi xing stud $27 1-49M-1034-0017 Datum sphere fi xing stud $27 1-49M-1034-0018 Datum sphere fi xing stud $27 1-49M-1034-0019 Daum sphere pillar extension $82 1-49M-1034-0042 Datum sphere 2 way adaptor $82 1-49M-1034-0052 Datum sphere 3 way adaptor $186 1-49M-1041-1088 CMM probe shank $151 1-34M-1041-1650 CMM probe shank $151 1-34M-1041-1652 CMM probe shank $151 1-34M-1041-1653 CMM probe shank $151 1-34



C-C

ON, INC.



7-28

Alp

ha-n

umer

ic p

rice

list

M-1041-1654 CMM probe shank $151 1-34M-1041-1656 CMM probe shank $151 1-34M-1041-1657 CMM probe shank $151 1-34M-1041-2146 CMM probe shank $151 1-34M-1041-2153 CMM probe shank $151 1-34M-1041-4843 CMM probe shank $151 1-34M-1041-5348 CMM probe shank $151 1-34M-1041-5981 CMM probe shank $151 1-34M-1041-7068 CMM probe shank $151 1-34M-1041-7132 CMM probe shank $193 1-34M-1041-7507 CMM probe shank $151 1-34M-1046-1120 CMM probe shank $151 1-36M-1046-1121 CMM probe shank $215 1-36M-1046-1122 CMM probe shank $151 1-36M-1046-1123 CMM probe shank $151 1-36M-1046-1124 CMM probe shank $151 1-36M-1046-1126 CMM probe shank $151 1-36M-1046-1128 CMM probe shank $151 1-36M-1046-1802 CMM probe shank $151 1-36M-1046-2661 CMM probe shank $151 1-36M-1046-4545 CMM probe shank $151 1-36M-1046-7107 CMM probe shank $151 1-36M-1049-1328 PH1 threaded rod end $15 6-8M-1051-0147 ACR1 100 mm leg $13 1-45M-1051-0148 ACR1 200 mm leg $24 1-45M-1085-0301 MCR20/SCR200 location plate $10 1-19, 1-24M-2008-0197 TS27 tool setting stylus $111 2-29M-2008-0333 TS20 break protect link $25 2-42, 5-25M-2008-0447 Stylus holder $95 5-26M-2008-0604 TS20 break protect link $25 2-42, 5-25M-2008-0605 TS20 break protect link $25 2-42, 5-25M-2008-0866-RI-KIT TS27R 100 mm riser $129 2-29M-2028-3917 Setting disk $4 2-5, 2-10M-2028-7576 Spacer (1 mm thick) $36 2-5, 2-10M-2028-7577 Spacer (3 mm thick) $36 2-5, 2-10M-2033-6439 CAT 40 shank $368 2-22M-2033-6440 CAT 45 shank $368 2-22M-2033-6441 CAT 50 shank $368 2-22M-2033-6445 BT 40 shank $368 2-22M-2033-6446 BT 45 shank $368 2-22M-2033-6447 BT 50 shank $368 2-22M-2045-0027 BT 40 shank $368 2-22M-2045-0038 BT 45 shank $368 2-22M-2045-0068 CAT 30 shank $368 2-22M-2045-0069 CAT 40 shank $368 2-22M-2045-0071 CAT 50 shank $368 2-22M-2045-0073 BT 50 shank $368 2-22M-2045-0077 BT 30 shank $368 2-22M-2045-0138 CAT 45 shank $368 2-22M-2045-0186 HSK shank A40 $693 2-22M-2045-0187 HSK shank A50 $826 2-22M-2045-0188 HSK shank A63 $887 2-22M-2045-0189 HSK shank A80 $1,074 2-22M-2045-0190 HSK shank A100 $1,077 2-22M-2045-0292 CAT 60 shank $1,700 2-22M-2045-0310 CAPTO C6 shank $676 2-22M-2045-0311 CAPTO C8 shank $1,708 2-22M-2045-0335 KM63 shank $1,388 2-22M-2045-0346 CAPTO C5 shank $995 2-22M-2045-1831591 KM63Y (Mazak) shank $1,388 2-22M-2048-2093 Crash protection device $25 5-25M-2048-2093 HPRA/HPPA/HPMA M4 break stem $25 2-40M-2051-4522 MP1/S probe rear seal $10 2-6, 6-8M-2051-6148 MP1/R probe rear seal $10 2-6, 6-8M-2053-5246 Front cover for MP3 probe $62 2-10M-2063-8003 Chip defl ector $40 2-34M-2085-0069 Crash protection device $25 5-25M-2107-0115 Battery cap seal $20 6-8M-2116-0127 Crash protection device $25 5-25M-2116-1356 MP15/MP11 adaptor $225 2-12



C-C

ON, INC.

7-29

Alp

ha-n

umer

ic p

rice

list


M-2197-0150 HPRA/HPPA/HPMA break stem $25 2-37, 2-40, 5-25M-2197-0156 HPRA/HPPA/HPMA break stem $25 2-37, 2-40, 5-25M-2238-0443 SH80 removal tool $58 1-31M-2253-0954 Calibration tool (CAT 40 shank) $431 2-22M-2253-0955 Calibration tool (CAT 50 shank) $539 2-22M-2253-1262 Calibration tool (BT 50 shank) $539 2-22M-2253-1263 Calibration tool (BT 40 shank) $431 2-22M-4071-0044 HSK E25 shank $482 2-22M-4071-0045 HSK A32 shank $482 2-22M-4071-0046 HSK A40 shank $482 2-22M-4071-0047 HSK A50 shank $649 2-22M-4071-0048 ISO30 DIN69871 shank $413 2-22M-4071-0049 BT 30 shank $425 2-22M-4071-0050 CAT 30 shank $413 2-22M-4071-0054 HSK E40 shank $482 2-22M-4071-0055 HSK E32 shank $482 2-22M-4071-0057-RI BT 40 shank kit $539 2-22M-4071-0057 BT 40 shank $368 2-22M-4071-0058-RI CAT 40 shank kit $539 2-22M-4071-0058 CAT 40 shank $368 2-22M-4071-0065 KM63 shank $822 2-22M-4071-0066 CAPTO C5 shank $822 2-22M-4071-0067 CAPTO C6 shank $822 2-22M-4071-0069 ISO40 DIN69871 shank $395 2-22M-4071-0072 CAT 50 shank $520 2-22M-4071-0119 OMP40 round battery cap seal $9 6-8M-4071-0129 HSK A63 shank $568 2-22M-5000-3540 S7 stylus tool $9 1-51, 5-52, 5-53, 5-54, 5-55, 5-56, 5-57, 5-58, 5-59, 5-60, 5-61, 5-62, 5-63, 5-64M-5000-3541 S8 spanner $12 5-56, 5-57, 5-58M-5000-3571 SIP/M3 stylus adaptor $9 5-59, 5-60M-5000-3592 M3 stylus extension $12 3-21, 5-18, 5-59, 5-60, 5-87M-5000-3593 M3 stylus extension $12 5-18, 5-59, 5-60M-5000-3647 M2 stylus extension $13 5-12, 5-53, 5-56, 5-57, 5-58, 5-87M-5000-3648 M2 stylus extension $13 5-12, 5-53, 5-57, 5-58, 5-87M-5000-3707 M4 stylus tool $8 1-51, 5-52, 5-64M-5000-4150 M2 pointer stylus $25 5-13, 5-53, 5-57, 5-58M-5000-4152 M2 cylinder stylus $20 5-11, 5-53, 5-57, 5-58M-5000-4153 M2 cylinder stylus $20 5-11, 5-53, 5-57, 5-58M-5000-4162 M2 stylus extension $13 5-12, 5-53, 5-57, 5-58, 5-87M-5000-4163 M3/M2 stylus adaptor $12 3-21, 5-51, 5-57, 5-58, 5-64, 5-89M-5000-4164 M2/M3 stylus adaptor $12 5-51, 5-53, 5-60M-5000-6460 M4 star stylus center $100 5-24M-5000-6622 M4/M2 stylus adaptor $32 5-51M-5000-6625 M4/M3 stylus adaptor $20 5-51, 5-64M-5000-6714 M4/M3 stylus adaptor $32 5-51, 5-64M-5000-7582 Crash protection device $5 5-25M-5000-7583 M4 stylus extension $36 5-28M-5000-7584 M4 stylus extension $36 5-28M-5000-7585 M4 stylus extension $36 5-28M-5000-7586 M4 stylus extension $36 5-28M-5000-7587 Crash protection device $5 5-25M-5000-7588 Crash protection device $5 5-25M-5000-7589 M4 stylus crank $57 5-24M-5000-7590 M4 stylus crank $57 5-24M-5000-7591 M4 swivel adaptor $50 5-24M-5000-7592 M4 swivel adaptor $50 5-24M-5000-7633 M3 stylus extension $12 5-18, 5-87M-5000-7634 M2 stylus extension $11 3-21, 5-12, 5-53, 5-87M-5000-7779 M2 stylus extension $18 5-12, 5-53, 5-54, 5-87M-5000-8167 TF6/M3 stylus adaptor $35 5-51M-5000-9301 M5/M4 stylus adaptor $32 5-51M-5000-9304 M5 stylus tool $15 1-51, 5-52, 5-65, 5-66, 5-67, 5-68M-5003-1033 TS27 tool setting stylus $111 2-29M-5003-5553 Conductive stylus $73 2-21M-5003-5808 Conductive stylus $82 2-21M-5003-6045 Conductive stylus $92 2-21M-8003-0221 Short clamp screw $13 3-13M-8003-0264 Long clamp screw $13 3-13



C-C

ON, INC.



7-30

Alp

ha-n

umer

ic p

rice

list

M-8003-0470 Mounting pillar $87 3-13M-8003-0980 Universal tripod adaptor for ML10 $45 3-17M-8003-1063 Swivel mirror clamp screw $14 3-13M-8003-1070 Fixed turning mirror clamp screw $14 3-13M-8003-1307 HP optic adaptor plate $96 3-9M-8003-1768 RX10 interface cable $482 3-15M-8003-3083 Beam steerer clamp screw $13 3-13M-8014-0376 Spherical adaptor $54 3-20M-8014-0620 De luxe carrying case $395 3-20M-9908-0325 QC10 ballbar storage tray $225 3-10M-9908-0326 QC10 ballbar storage tray $235 3-10M-9908-0527 Universal tripod case $239 3-10MP11-NS-KIT MP11 hardare only kit $3,558 2-11MP11-NS-S MP11 retrofi t kit Call for price 2-11MP11 PLUG KIT 4 pin connector for MP11 cable $64 2-11MP700-NS-KIT MP700 hardware only kit $6,940 2-13MP700-NS-S MP700 retrofi t kit Call for price 2-13NC3-F135-S NC3 fi xed retrofi t kit Call for price 2-24NC4-F115-kit NC4 F115/55 with NCi-4 kit $4,781 2-25NC4-F115-S NC4 fi xed retrofi t kit Call for price 2-25NC4-F145-kit NC4 F145/85 with NCi-4 kit $4,781 2-25NC4-F145-S NC4 fi xed retrofi t kit Call for price 2-25NC4-F230-kit NC4 F230/170 with NCi-4 kit $4,781 2-25NC4-F230-S NC4 fi xed retrofi t kit Call for price 2-25NC4-F300-kit NC4 F300/240 with NCi-4 kit $4,781 2-25NC4-F300-Modular-kit NC4 F300/225 with NCi-4 kit $4,781 2-25NC4-F300-Modular-S NC4 fi xed retrofi t kit Call for price 2-25NC4-F300-S NC4 fi xed retrofi t kit Call for price 2-25NC4-F95-kit NC4 F95/23 with NCi-4 kit $4,781 2-25NC4-F95-S NC4 fi xed retrofi t kit Call for price 2-25NC4-S1500-S NC4 separate retrofi t kit Call for price 2-25NC4-S2000-S NC4 separate retrofi t kit Call for price 2-25NC4-S3000-S NC4 separate retrofi t kit Call for price 2-25NC4-S5000-S NC4 separate retrofi t kit Call for price 2-25NC4-S800-S NC4 separate retrofi t kit Call for price 2-25OMP40-NS-KIT OMP40 hardware only kit $6,113 2-14OMP40-NS-S OMP40 retrofi t kit Call for price 2-14OMP400-NS-KIT OMP400 hardware only kit $6,940 2-15OMP400-NS-S OMP400 retrofi t kit Call for price 2-15OMP60-NS-KIT OMP60 hardware only kit $6,113 2-16OMP60-NS-S OMP60 retrofi t kit Call for price 2-16OTS-KIT OTS hardware only kit (½AA) $4,053 2-27OTS-S OTS retrofi t kit (½AA) Call for price 2-27OTSAA-KIT OTS hardware only kit (AA) $4,053 2-27OTSAA-S OTS retrofi t kit (AA) Call for price 2-27P-BT03-0001 9 V alkaline battery $4 2-10, 2-31P-BT03-0006 3 V DL123A battery $10 2-31P-BT03-0007 ½AA battery $43 2-14P-CA82-1009 HPPA/HPMA R/E cable (5 meters) $52 2-40P-CA82-1010 HPPA/HPMA R/E cable (2 meters) $32 2-40P-CA82-1011 HPPA/HPMA R/E cable (10 meters) $73 2-40P-CN21-0304 4 pin socket for MP11 $57 2-11P-EN01-CART Two-wheeled cart $196 3-17P-EN01-LCSE Supercase $907 3-17P-FI01-S002 Air fi lter service kit $147 2-24, 2-26, 2-28P-GA01-0001 Gram gage $146 1-33P-HO01-0008 Steel sheath conduit $23 2-24, 2-26P-HO01-0011 Steel sheath conduit $23 2-26P-NU18-0005 M8 T nut $13 1-47P-SC01-0308 M3x8 screw FOC 2-10P-SC01-0420 IMM screw FOC 2-5, 2-10P-SC01-0430 M4x30 screw FOC 2-6, 2-10P-SC01-0435 M4x35 screw FOC 2-10P-SC08-0335 Battery cap screw $1 6-8P-SC13-0403 TS27R stylus holder set screws $1 2-29P-TL01-0089 S12 hex key $4 1-51P-TL01-0150 S3 hex key $4 1-51, 5-53, 5-54, 5-56, 5-57, 5-58, 5-59, 5-60, 5-67, 5-68P-TL01-0200 S5 hex key $4 1-51P-TL01-0250 S6 hex key $4 1-51, 5-65, 5-66, 5-67, 5-68



C-C

ON, INC.

7-31

Alp

ha-n

umer

ic p

rice

list


P-TL01-0300 S4 hex key $4 1-51, 5-68RI-4007-1000 GibbsCAM post processor upgrade $300 2-48RI-4038-0001 OMP60 upgrade kit $1,902 2-16RI-4038-1003 OMP60M upgrade kit $2,422 2-17RI-4071-0001 OMP40 upgrade kit $1,902 2-14RI-4113-0001 RMP60 upgrade kit $5,200 2-18RI-4113-1003 RMP60M upgrade kit $5,720 2-19RI-5069-0001 OMP400 upgrade kit $2,282 2-15RI-5312-0001 RMP600 upgrade kit $6,440 2-20RI-6000-0001 MT hourly labor $140/hour 2-50RI-6000-0002 MT hourly travel $75/hour 2-50RI-6000-0003 MT expenses as incurred 2-50RI-6002-0001 CMM hourly labor $110/hour 1-52RI-6002-0002 CMM hourly travel $60/hour 1-52RI-6002-0003 CMM expenses as incurred 1-52RI-6002-0004 CMM in-house training $450/day 1-52RMP60-NS-KIT RMP60 hardware only kit $8,085 2-18RMP60-NS-S RMP60 retrofi t kit Call for price 2-18RMP600-NS-KIT RMP600 hardware only kit $10,032 2-20RMP600-NS-S RMP600 retrofi t kit Call for price 2-20SEALTITE, 7455 Sealtite conduit $23 2-5, 2-10, 2-13, 2-14, 2-15, 2-16, 2-28, 2-31SPI-30078-H 2 inch ring gage $193 2-22TRS2-kit TRS2 hardware kit $2,600 2-28TRS2-S TRS2 retrofi t kit Call for price 2-28TS27R-KIT TS27R hardware only kit $1,402 2-29TS27R-S TS27R retrofi t kit Call for price 2-29VSX-0500-E 0.5 inch gage pin $54 2-22XL80-BASE XL-80 laser base system kit $23,685 3-6



C-C

ON, INC.



7-32

Alp

ha-n

umer

ic p

rice

list



C-C

ON, INC.

Documents

Renishaw Product Catalog Issue15