Name: Uzair Ahmad Khan Ph. No: +92-051-2280144

H. No. 304, St. No. 77 Mobile: +92-0343-5020838

Sector G-9/3, Islamabad, Pakistan Email: uzairahmadkhan1993@gmail.com

LinkedIn: https://pk.linkedin.com/pub/uzair-khan/80/49a/574

Career Goal

To secure a challenging position in an engineering environment where one can progressively

grow both professionally and personally through continuous learning.

Summary

A vigorous and highly motivated Mechatronics Engineer. Passionate to learn and have abilities

to succeed. A Keen supporter of team work and have enthusiasm to reach for goals. Ideal candidate for

position requiring drive, initiative, responsibility and challenge.

My four years Graduate program was geared towards Robotics and Automation. I completed

144 Credit hours. I did 15 projects during my bachelors. Projects varied from pure electrical and

mechanical to Electro mechanical. Awards include four time AU merit scholarship and Prime Minister

Nawaz Sharif laptop for extraordinary students.

Experience includes an internship at a solar technology firm and has the following technical

skills:

CAD Packages: Solid Works, Auto Cad and Creo.

FEA Packages: ANSYS.

Electronic Packages: Express PCB, Proteus, Electronics Workbench.

Programming languages: C, C++, Assembly, Verilog and ladder logic for Allen Bradley PLC.

Mechanical Design: Designed Inventory Taking Robot.

Education

From – Till Institution City Degree Subject CGPA Status

1. 06/11-06/15 Air

University

Islamabad BE-MTS Mechatronics 3.53

Completed

2. 06/09-07/11 IMCB F-8/4 Islamabad HSSC

Higher Secondary

School Certificate

Pre-Engineering A Grade Completed

3. 06-07-06/09 IMCB F-8/4 Islamabad SSC

Secondary School

Certificate

Science A1 Grade Completed

Semester Projects

Project Name Description

1. Super store Billing System Used C++ to make bill using database from file.

2. 4-bit Receiver-Transmitter using IR-Sensors Made under course Instrumentation and Measurements

used 4-bit registers

3. Mobile CAD design Used CREO(formerly known as Pro-e)

4. Rectifier Traditional Full wave Rectifier using four diodes in bridge

Configuration. PCB was designed using Express PCB®

and Etched.

5. Transformer Wounded a Center tap transformer from 220AC-30VAC

6. Robot moving on continuous L shaped path. Robot was made using 555 timer IC and Counter. The

robot move 1foot straight then turn right move 1foot and

then turn left and move 1 foot and repeats the path.

7. C-Clamp Done all theoretical calculations. Selected threads using

UTS. Made a Cad design using Auto CAD.

8. Digital Lock Made a Digital logic using PIC-18F452 microcontroller.

Interfaced a LCD HITACHI HD-44780 and a Keypad.

9. Circular to linear sliding mechanism Fabricated a circular to linear sliding 3-bar mechanism.

10. Line tracking robot Made a LTR using opto-couplers and Arduino®

microcontroller.

11. ATM system using FPGA Made ATM system that take a pin and amount and display

Transaction completed at LCD. FPGA kit used was Altera

Quartus Cyclone-II. The HDL used was Verilog.

12. Casting Aluminum Casting of a shape was done. A CAD design

was also created in Solid Works®.

13. Modeling of DC motor Mathematical modeling of a DC motor was done. Transfer

function was found out of motor. Nyquist plot was made

using Matlab®.

14. 4-bit unsigned multiplier A multiplier was made for Xilinx Spartan 3E kit

Final Year Project

Project Name Description

status

Inventory control and navigation

robot

Robot designed under this project is for inventory

management of a warehouse. It will do it in

following manner:-

After a GO signal from the server. The robot

will take a round of the warehouse; during which it

will count products placed in the shelves of ware

house and also memorize their positions. After the

round it will display the items position on computer

along with their quantity.

completed

Technical Skills

Languages Computer Packages Hardware Pakages

C++, C, Assembly,

Verilog, Ladder logic of

Allen Bradley PLC

AutoCAD, Creo, Solid Works,

ANSYS, Matlab,

Mplab, Xilix(IDE), RSlogix500,

Quartus II design software, Proteus,

ExpressPCB,

Electronic workbench, Microsoft

Visual C++

PIC 18F452, Aurduino Mega and

UNO, Allen Bradley PLC Micro

logix series, Altera Quartus

Cyclone-II and Cyclone I, Xilinx

Spartan 3E kit

Experience/Internship

From – Till Institution City Designation Description

June-August 2012 Newage

Innovative

Islamabad Internee Worked on designing Solar system based on

Customer demand. Gaining Knowledge about

Monocrystalline, Polycrystalline and Amorphous

solar panels, batteries, solar charge controller,

Inverters and Solar geysers.

Interests

Engineering: Micro controllers, FPGA, PLC and Solar Technology.

Sports: Cricket, cycling.

Leisure: Movies.

News: Politics, Technology.

Awards & Achievements

1. Four times merit scholarship achieved.

2. Prime Minister Nawaz Sharif Laptop was awarded.