Upload
others
View
40
Download
3
Embed Size (px)
Citation preview
The LD2500 is a reverse circulation
drilling rig capable of drilling through
almost any soil and rock type. The rig
can accommodate drill bits of up to
5000mm with the BHA hanger
assembly.
The LD2500 has two power swivel op-
tions: a). 119kNm of torque operating
at max 34 RPM; or b). 539kNm of
torque operating at max 3 RPM.
The gripper allows connection of the
drilling rig to the pre-installed pile or
conductor with sufficient capacity to
accommodate the static and dynamic
forces the drill rig can generate. The
drilling rig may also be installed on a
cantilevered frame on a JUB.
The Power Swivel provides the
rotation force required to drill the
socket. Thrust and holdback is
provided by the carriage rams located
in the drill mast supporting the
carriage.
Down-hole under-reaming can be used
in a variety of applications to enhance
installations efficiency and pile
capacity and sockets can be drilled
from vertical to 18° (1:3 rake).
www.lddrill.com | T: +44 (0)1209 861 930 | E: [email protected]
LD2500 Drill Rig Specifications
• Max drilling diameter 5000mm
• Max power swivel torque 539kNm [119kNm basic config.]
• Drill speed 0-34 RPM variable [3 RPM @ 539kNm torque]
• Max pull back available 200t
• Maximum thrust available 100t
• Weight 34t @ max 539kNm torque / 30t @ 119kNm max torque
• Tilting deck for raked piles
• Modular design and assembly for global shipping
LD2500 Reverse Circulation Drilling Rig Range | 2000mm—5000mm with BHA hanger assembly
The drill can be mobilised anywhere in the world as it can be broken down into component form, loaded into sea
freight containers and reassembled on arrival. Typical assembly and re-commissioning takes 3-5 days.
www.lddrill.com | T: +44 (0)1209 861 930 | E: [email protected]
Specification for LD2500
Max inclination 18 degrees 1 in 3 rake
Weight including rigging and gripper 30t [119kNm] / 34t [539kNm]
Drill pipe NW200 or NW300 3m lengths
Dimensions L 7,235 x W 6,102 x H 10,285
Hydraulic power pack rating 273kW
Power pack weight 6.2t
Main applications
• Pier and jetty construction
• LNG terminals
• Relief drilling
• Drive Drill Drive
• Riser / outfall shafts
• Waste water treatment plants
• Jacket installations for Oil
and Gas industry