-
UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES
ARE:DECIMALS ANGLES.XX: .01[.3] 2 .XXX: .005[.13].XXXX:
.0020[.051]
TOLERANCES DO NOT APPLYTO REFERENCE DIMENSIONS. THIS DOCUMENT
CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING,
REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY
RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN
WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED,
TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER
WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE* *
C
THIS PRODUCT MANUFACTUREDWITH LEAD-FREE PROCESSINGPb
DO NOTSCALE FROM
THIS PRINT
C
6QDP-XXX-XX.X-XXX-XXX-X-XNo OF POSITIONS
-016, -032, -048, -064(PER ROW)
LENGTH-XX.X (INCHES)
(1.72 [43.7] MIN)(SEE NOTE 2)(SEE NOTE 8)
FIRST END
-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR:
TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET,
TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL:
SOCKET, BOTTOM, LEFT (SEE TABLE 1 & SHEET 2)
-TEU: TERMINAL, EDGE MOUNT, UP-TED: TERMINAL, EDGE MOUNT, DOWN
(SEE TABLE 5 & SHEET 4)
SECOND END
WIRING OPTION (SEE NOTE 9)**-1: PIN 1 TO PIN 1**-2: PIN 1 TO PIN
2**-3: PIN 1 TO PIN N-1**-4: PIN 1 TO PIN N -5: PIN 1 TO PIN 1 -6:
PIN 1 TO PIN 2 -7: PIN 1 TO PIN N-1 -8: PIN 1 TO PIN N(SEE TABLE 9,
SHEET 6)
-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR:
TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET,
TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL:
SOCKET, BOTTOM, LEFT (SEE TABLE 1 & SHEET 3)
-TEU: TERMINAL, EDGE MOUNT, UP-TED: TERMINAL, EDGE MOUNT, DOWN
(SEE TABLE 5 & SHEET 4)
-F: SCREW OPTION FIRST END ONLY-S: SCREW OPTION SECOND END
ONLY-B: SCREW OPTION BOTH ENDS-N: NO CAPS(SEE FIG 3, SHEET 5 FOR
EDGE MOUNT END OPTIONS)(SEE FIG 4, SHEET 5 FOR DOUBLE VERTICAL END
OPTIONS)(SEE FIG 5, SHEET 5 FOR NO CAPS OPTIONS)(LEAVE BLANK FOR
STANDARD CAPSBOTH ENDS)
END OPTION
LENGTH: XX.X + "L" REF (SEE TABLE 4)
.570 14.49REF (TYP)
.845 21.47REF (TYP)
"A"REF
(TYP)
"B"REF
(TYP)
LENGTH: XX.X 01%C
'A'
SUB-6QDP-X-XXX-XX-XX
N(SEE TABLE 3)
N-1(SEE TABLE 3) N(SEE TABLE 3)
N-1(SEE TABLE 3)
SUB-6QDP-X-XXX-XX-XX
0102 01
STS-01(TIGHTEN TO 1.4 - 1.7 IN-LBS)
(4 PLCS)
02
FIRST END SECOND END
.294 7.47REF (TYP)
* "C" REF
QDP-XX-01
QDP-XX-02
SUB-TTF-30100CU-08-01-XX.XX(SEE TABLE 1 FOR QTY)
LENGTH REF
DETAIL 'A'SCALE 2.5 : 1
HDRL-11(SEE NOTE 5)
C
FIG 1VERTICAL
(6QDP-032-XX.X-STR-STR-5 SHOWN)
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
SHEET OF
MATERIAL:.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:
6QDP-XXX-XX.X-XXX-XXX-X-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 71
SHEET SCALE: 1.25:1
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. SUB-TTF LENGTH IS
EQUAL TO 6QDP LENGTH. 3. ALL ASSEMBLIES TO BE 100% ELECTRICALLY
TESTED FOR SHORTS AND OPENS. 4. ALL ASSEMBLIES TO BE 100% HI-POT
TESTED AT 300V. 5. TOP SUB-TTF NOT SHOWN IN THIS VIEW FOR CLARITY;
HDRL-11 TO BE CENTERED ON LOWER SUB-TTF AS SHOWN; HDRL-11 IS TO
CONTAIN PART NUMBER, SHOP NUMBER, LINE NUMBER & DATE CODE. 6.
PACKAGE ASSEMBLIES IN STATIC DISSIPATION BAGS. 7. PARTS TO BE
PROCESSED PER SAMTEC ACCEPTABILITY REQUIREMENTS: HDR-PI-01 "CABLE
ASSEMBLY WORKMANSHIP STANDARDS". 8. CABLE LENGTHS LONGER THAN 40.00
INCHES ARE NOT SUPPORTED BY S.I. TEST DATA. 9. WIRING OPTION -5
THROUGH -8 USE 30100CU.
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
REVISION K
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION
AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND
SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT
SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED
PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF
SAMTEC, INC.
PROPRIETARY NOTE* *
N-1N
T16
T112
-TTR
T
B
T1
T161
2
N N-1-TTL
T
B
N-1N
B1
B1612
T
B
B16
B112
NN-1
T
B
1
2
T16
T1N-1N
-STR
T
B
T1
T16N-1
N
2 1-STL
T
B
1 2 B1
B16N-1N
T
B
B16
B1N-1
N
21
T
B
FIRST END - VERTICAL (SEE TABLE 9, SHEET 6)
-TBL-TBR
-SBL-SBR
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
SHEET OF
.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:
6QDP-XXX-XX.X-XXX-XXX-X-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 72
SHEET SCALE: 1.25:1
REVISION K
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION
AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND
SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT
SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED
PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF
SAMTEC, INC.
PROPRIETARY NOTE* *
N-1N
T1
T16 12
-TTL
T
B
T16
T1
1 2
NN-1
-TTR
T
B
N-1N
B16
B11
2
T
B
B1
B161
2
NN-1
T
B
12
T1
T16N-1
N
-STL
T
B
T16
T1
N-1 N
21
-STR
T
B
12B16
B1N-1N
T
B
B1
B16
N-1N
21
T
B
SECOND END - VERTICAL (SEE TABLE 9, SHEET 6)
-SBL-SBR
-TBL-TBR
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY **: AVAILABLE TO
EXISITNG CUSTOMERS ONLY
SHEET OF
.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:
6QDP-XXX-XX.X-XXX-XXX-X-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 73
SHEET SCALE: 1.25:1
REVISION K
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION
AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND
SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT
SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED
PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF
SAMTEC, INC.
PROPRIETARY NOTE* *
T1
T16
B
T
NN-1
1 2
N N-1
12
T1
T16
B
T
N N-1
12
T16
T1
-TEU
B
T
NN-1
1 2T1
T16
B
T
"E"REF
"D"REF
LENGTH: XX.X + "L" REF(SEE TABLE 4, SHEET 1)
QDP-XX-03(TYP)
FIG 2EDGE MOUNT (NO CAPTIVE PANEL SCREWS)
(6QDP-016-XX.X-TEU-STL-X SHOWN)(SAME AS FIG 1, UNLESS OTHERWISE
STATED)
.422 10.72REF
SUB-6QDP-X-XXX-03-XX
FIRST END - EDGE MOUNT (SEE TABLE 9, SHEET 6) SECOND END - EDGE
MOUNT (SEE TABLE 9, SHEET 6)
-TED-TED
-TEU
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
SHEET OF
.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:
6QDP-XXX-XX.X-XXX-XXX-X-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 74
SHEET SCALE: 1:1
REVISION K
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION
AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND
SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT
SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED
PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF
SAMTEC, INC.
PROPRIETARY NOTE* *
"F"REF
"G"REF
.500 12.70REF (TYP)
(FULLY TIGHTENED)
"H"REF
CPS-4-40-01-X(TYP)
QDP-XX-03-CPS (TYP)
"K"REF
"J"REF
.140 3.56REF (TYP)
.296 7.52(TYP)
QDP-XX-02-SDO
QDP-XX-01
"L" REF
.220 5.59REF
(SEE TABLE 9)"M"
(SEE TABLE 9)"N"
SUB-6QDP-X-XXX-XX-XXSUB-6QDP-X-XXX-03-XX
SUB-TTF-30100CU-XX-XX-XX.XX
FIG 5(6QDP-016-XX.X-TEU-STL-N SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
APPLY UV EPOXY TO ALL CABLE ENDS(HEIGHT NOT TO EXCEED .089[2.26]
ABOVE PCB SURFACE)
FIG 4DOUBLE VERTICAL (WITH SCREW DOWN OPTION)
(6QDP-016-XX.X-STR-XXX-5-F SHOWN)(SAME AS FIG 1, UNLESS
OTHERWISE STATED)
FIG 3EDGE MOUNT (WITH CAPTIVE PANEL SCREWS)
(6QDP-016-XX.X-TEU-XXX-5-F SHOWN)(SAME AS FIG 2, UNLESS
OTHERWISE STATED)
SHEET OF
.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:
6QDP-XXX-XX.X-XXX-XXX-X-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 75
SHEET SCALE: 1.25:1
REVISION K
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION
AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND
SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT
SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED
PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF
SAMTEC, INC.
PROPRIETARY NOTE* ***: AVAILABLE TO EXISITNG CUSTOMERS ONLY
SHEET OF
.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:6QDP-XXX-XX.X-XXX-XXX-X-X
DWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 76
SHEET SCALE: 1.25:1
REVISION K
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION
AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND
SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT
SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED
PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF
SAMTEC, INC.
PROPRIETARY NOTE* *
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
SHEET OF
.635mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
BY:6QDP-XXX-XX.X-XXX-XXX-X-X
DWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
T WHELAN 01/31/06 77
SHEET SCALE: 1.25:1
REVISION K
F:\DWG\MISC\MKTG\6QDP-XXX-XX.X-XXX-XXX-X-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX:
812-948-5047e-Mail: [email protected] code: 55322
Sheet1Drawing View7Drawing View8Drawing View9Detail View 'A'
(2.5 : 1)Drawing View11
Sheet2Drawing View12Drawing View13Drawing View14Drawing
View15Drawing View16Drawing View17Drawing View18Drawing
View19Drawing View20Drawing View21Drawing View22Drawing
View23Drawing View24Drawing View25Drawing View26Drawing View27
Sheet3Drawing View28Drawing View29Drawing View30Drawing
View31Drawing View32Drawing View33Drawing View34Drawing
View35Drawing View36Drawing View37Drawing View38Drawing
View39Drawing View40Drawing View41Drawing View42Drawing View43
Sheet4Drawing View44Drawing View45Drawing View46Drawing
View48Drawing View49Drawing View50Drawing View51Drawing
View52Drawing View53Drawing View54Drawing View55Drawing
View56Drawing View57Drawing View58
Sheet5Drawing View59Drawing View60Drawing View61Drawing
View62Drawing View63
Sheet6Sheet7
