Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Umweltfreundlich• vollständig biologisch abbaubar• nicht toxisch, keine EP-Zusätze• sauberer Arbeitsplatz• keine Ausschläge oder Allergien
Bestell-Nr. Bezeichnung Gewicht/Stück €/Stück
173 120 ACCU-LUBE LB 5000 Paste Geleeausführung 226 g 16,50173 125 ACCU-LUBE LB 5000 Paste festere Ausführung 226 g 16,50173 156 ACCU-LUBE LB 5000 Block 71 g 5,75173 155 ACCU-LUBE LB 5000 fest, Stick 62 g 6,30173 150 ACCU-LUBE LB 5000 fest, Stick 368 g 39,90
Wirtschaftlich• Accu-Lube Produkte erhöhen die Standzeit der
Werkzeuge nachweislich um bis zu 100%• trockene Späne verringern die Entsorgungskosten
Accu-Lube Paste Accu-Lube Stick Accu-Lube Block
Die umweltfreundliche Accu-Lube Minimalmengenschmierung ist seit 25 Jahren erfolgreich imEinsatz.Für maschinelle Bearbeitungen sind unsere Accu-Lube Dosiergeräte undAccu-Lube MiniBooster bestens geeignet. Sie tragen je nach Gerät entweder durch die Außen-oder die Innenschmierung eine kleine Menge an Schmiermittel auf die Werkzeugschneiden auf.Für optimale Ergebnisse sorgen unsere Accu-Lube Schmiermittel. Sie basieren auf natürlichen,nachwachsenden Rohstoffen und schaden weder Mensch noch Umwelt.Leisten auch Sie Ihren Beitrag und optimieren Sie mit unseren umweltfreundlichen Accu-LubeProdukten Ihre Prozessabläufe in der Produktion.Für manuelle Arbeiten, z.B. Bohren, Gewindeschneiden, Schleifen und auch Montagearbeitenempfehlen wir Ihnen unsere Accu-Lube Paste, Block oder Stick.
Herkömmlich mit Kühlschmierstoffen Accu-Lube Minimalmengenschmierung
Mailing0113.qxp 13.02.2013 09:30 Seite 2
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
3
DIN 6535 HA
d¹
Xl
d1
D
Zur Bearbeitung von Stählen bis 55HRC,rostfreien Stählen/Ti-Legierungenund GussmaterialienTiAlN beschichtete Werkzeuge
Zur weiteren Verbesserung der Standzeit:Werkzeuge mit Doppelschicht TiAlN + REX2000 (Multilayer-Schicht)
-20%
-20%
Mailing0113.qxp 13.02.2013 09:30 Seite 3
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
lArbeitsempfehlungen:Drehzahl: n = 400 - 600 min-1
Vorschub: f = 0,01 - 0,05 mm/U
Einsatzempfehlung werkstoffbezogen:• alle Stahlsorten,
auch für gehärtetes Material
l1
l2
Ød2
Ød1
Ød1 = Ød2
Vollhartmetall- Gesenk- und Vollbohrer
-20%
-10%
Mailing0113.qxp 13.02.2013 09:30 Seite 4
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
5
Senk- und Entgratwerkzeuge 90° als Satz mit 6 HSS-Wendeplatten
Bestell-Nr.
288 960288 965
110,40134,60
€/Stück
5-2419-38
350-500200-350
EinsatzbereichØ mm
EmpfohleneU/min.
6775
GesamtlängeL1 mm
4550
SchaftlängeL2 mm
1012
Schaft-ØD mm
Halter
Einsatzbereich: Ø 5 - 38mm
Bestell-Nr.289 990289 9903289 9907
TiAlNREX2000
BeschichtungHSSHSSHSS
Qualität16,4519,5020,20
1215,7018,8019,50
2415,0018,0018,75
3614,6017,6018,30
48€/Stück bei Abnahme von
HSS-Wendeplatten mit 2 einsetzbaren Schneidkanten
Bestell-Nr.289 995289 9953289 9957289 9958
TiAlNREX2000
Rexcellent
BeschichtungHSSHSSHSSHSS
Qualität31,5034,5535,1535,45
1230,0033,0533,6533,95
2428,5031,5532,1532,45
3627,0030,0530,6530,95
48€/Stück bei Abnahme von
HSS-Wendeplatten mit 6 einsetzbaren SchneidkantenVerpackungseinheit: 12 Stück
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Miniatur-Innendrehwerkzeuge
SPECIALS!!!
20P
45
R
3
®
Werkzeughalter Typ QSG, quadratischEigenschaften:
• Einzigartiges „3-Punkt Wechsel- und Spannsystem“ ermöglicht eine Wiederhol-genauigkeit von -0,01mm/+0,01mm bei Wechsel des VHM-Schneideinsatzes
• Kühlmitteleinsatz möglich
• Gehärtete Werkzeughalter
• Einsatzbereich: Standard-Drehmaschinen
b/StückBestell-Nr.
136,20136,20150,30150,30
402 200402 202402 206402 208
D3mm4,86,44,86,4
Dmm12,712,719,119,1
d1mm19,119,126,926,9
Lmm122122122122
VHM-Schneideinsatz zum Miniatur-Innendrehen Typ QBBTechnische Daten:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
-10%
•1000-fach in der deutschen Industrie im Einsatz•Keine Lamellen, kein Getriebe•Konstantes Drehmoment und Geschwindigkeit unter Lastwechsel•Turbinenantrieb = wenig bewegliche Teile, weniger Reparaturen•Ergonomisches Design = ermüdungsfreies Arbeiten•Ölfreies Arbeiten, versiegelte Lager = kein Ölen, kein Ölnebel•Ruhiger Lauf = unter 70 dBA•Vibrationsniveau = 2,2 m/s²•Benötigter Betriebsdruck 6,2 bar•Rundlaufgenauigkeit < 0,03 mm
Handgeführter Druckluftturbinen-Schleifer
Modell 206 XSV
Spannzange: 6 mm b/StückModell Nr. ohne Bremse: 206 XSV Bestell-Nr. 649 605 492,65 443,40Drehzahl U/min: 50.000KW: 0,30Luftverbrauch l/s: 2,84 - 7,56Auslösung: Schieberventil am Schlauch, im Lieferumfang enthalten
Weiterentwicklung des bewährten Graviergriffels G-400
-15%
-10%
7
Mailing0113.qxp 13.02.2013 09:32 Seite 7
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
8
Handgeführte elektrische Schleifer
Gleichstrom-Leistungsgeber 3-fach Station C321 und Handstück M11HS als Satz
• Überlastungs-Anzeige
• Anschluss für Handstücke mitintegriertem An-/Ausschalter
• Signalfunktion
• Eingebaute Vierfachabsicherung
• Kontinuierlicher Rückmeldungsprozess
• Sichere Konstruktion mit Erdung
• Wahlschalter für Drehrichtungdes Werkzeugs
• Sanftes Anfahren und schnelles Bremsen
Handstück M11HS û 673,-• Handschalterfunktion
• Einfacher schneller Werkzeugwechsel
• Leichter Spannzangenwechsel
• Drehzahl von 3.500 - 35.000 U/min.
Satz Leistungsgeber C321 + Handstück M11HSBestell-Nr. 503052F zum Preis von û/Satz 1.286,-
Gleichstrom-Leistungsgeber 1-fach Station C121 und Mini-Bandschleifer BS31
• Überlastungs-Anzeige
• Anschluss für Handstücke mitintegriertem An-/Ausschalter
• Signalfunktion
• Eingebaute Vierfachabsicherung
• Kontinuierlicher Rückmeldungsprozess
• Sichere Konstruktion mit Erdung
• Wahlschalter für Drehrichtungdes Werkzeugs
• Sanftes Anfahren und schnelles Bremsen
Satz Leistungsgeber C121 + Mini-Bandschleifer BS31Bestell-Nr. 503050 zum Preis von û/Satz 1.332,-
Mini-Bandschleifer BS31 û 878,-
-12%
-15%
Mailing0113.qxp 13.02.2013 09:34 Seite 8
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Mit Kontaktarm 12 x 457mmBestell-Nr. 300 760 €/Stück 365,-
333
666
191919
BreitemmBestell-Nr.
303500303505303510
303520303525303530
303560303565303570
457457457
457457457
457457457
Längemm
60 Zirkonia120 Zirkonia320 Oxid
60 Zirkonia120 Zirkonia320 Oxid
60 Zirkonia120 Zirkonia320 Oxid
Körnung0,860,830,76
0,890,890,83
1,821,751,45
100,780,750,69
0,810,810,75
1,651,591,32
500,650,630,58
0,680,680,63
1,381,331,10
100+€/Stück bei Abnahme von
Endlosbänder
Als Satz mit 20 Endlosbändern gratis û/Satz 365,-Wählen Sie den gewünschten Bandschleifer und die Körnung der Endlosbänder
Druckluftbandschleifer BFDruckluftbandschleifer BF mit Kontaktarm 12 x 457mminkl. 20 Endlosbänder Körnung 60Bestell-Nr. 300710-60 €/Satz 365,-
Druckluftbandschleifer BF mit Kontaktarm 12 x 457mminkl. 20 Endlosbänder Körnung 120Bestell-Nr. 300710-120 €/Satz 365,-
Druckluftbandschleifer BF mit Kontaktarm 12 x 457mminkl. 20 Endlosbänder Körnung 320Bestell-Nr. 300710-320 €/Satz 365,-
BF 003BF 006BF 012BF 019
Code-Nr.Bestell-Nr.300 780300 785300 790300 795
3 x 457mm, gekrümmt6/12 x 457mm, gekrümmt12 x 457mm, gerade19 x 457mm, gerade
Bezeichnung49,0049,0049,0055,00
€/Stück24mm24mm18mm
18,5mm
Ø9mm9mm9mm
15,3mm
Breite
Weitere einsetzbare Kontaktarme undEndlosbänder für Bandschleifer Typ BF & BFE
121212
BreitemmBestell-Nr.
303540303545303550
457457457
Längemm
60 Zirkonia120 Zirkonia320 Oxid
Körnung1,221,201,00
101,111,080,93
500,930,900,78
100+€/Stück bei Abnahme von
Endlosbänder für Bandschleifer Typ BF & BFE
Bandrolle
BF 006
Ø24mm
B9mm
BF 003
Ø24mm
B9mm
BF 019
Ø18,5mm
B15,3mm
BF 012
Ø18mm
B9mm
Elektrobandschleifer BFEElektrobandschleifer BFE mit Kontaktarm 12 x 457mminkl. 20 Endlosbänder Körnung 60Bestell-Nr. 300760-60 €/Satz 365,-
Elektrobandschleifer BFE mit Kontaktarm 12 x 457mminkl. 20 Endlosbänder Körnung 120Bestell-Nr. 300760-120 €/Satz 365,-
Elektrobandschleifer BFE mit Kontaktarm 12 x 457mminkl. 20 Endlosbänder Körnung 320Bestell-Nr. 300760-320 €/Satz 365,-
Kontaktarme
Ersparnisbis zuû 24,40
Mailing0113.qxp 13.02.2013 09:35 Seite 10
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
EW-Kombi - Leistungsstarkes Reinigungssystemfür rostfreie Stähle zur Entfernung von Anlauffarben an Schweißnähten
Unser neues leistungsstarkes Reinigungssystem kommtbeim Entfernen von Anlaufverfärbungen, die durch WIG-oder Punktschweißen entstehen, zum Einsatz.
Das System besteht aus einem Grundgerät, an dassowohl ein Handstück für eine Bürste als auch einHandstück für ein Schaufelblatt mit Kissenangeschlossen werden kann.
Der Einsatz des Schaufelblatts mit Kissen ist optimalfür die schnelle Bearbeitung an leicht zugänglichenStellen geeignet.Das Besondere an unserem Reinigungssystem ist dieBürste, mit der problemlos auch schwer zugänglicheStellen einfach und sauber bearbeitet werden können.
Schweißnähte vor der Bearbeitung mit demEW-Kombi Reinigungssystem
Schweißnähte nach der Bearbeitung mit demEW-Kombi Reinigungssystem
Ersparnisû 276,-
Mailing0113.qxp 13.02.2013 09:38 Seite 11
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Unser technischer Außendienst betreut Sie in ganz Deutschland.
Technische Änderungen vorbehalten. REXIM haftet nicht für Vollständigkeit und Richtigkeit in Form und Inhalt.
Wir behalten uns das Recht vor, die Preise ohne Vorankündigung zu ändern.Es werden grundsätzlich die zum Zeitpunkt der Lieferung gültigen Preise berechnet.
Zahlung innerhalb von 10 Tagen mit 2% Skonto oder 30 Tage netto.
Sie finden den für Sie zuständigen Ansprechpartner und weitere aktuelle Werkzeugangebote unter: www.rexim.de
Alle Preise in € pro Stück, ausschließlich MwSt., ab unserem Lager.
Postfach 80 · 75430 Maulbronn
Aufträge ab €250,-- frei Empfangsstation in Deutschland, einschließlich Verpackung.
Mindestbestellwert € 75,-- netto, bei kleineren Aufträgen müssen wir einen Mindermengenzuschlag von € 25,-- berechnen.
Gerne übersenden wir Ihnen unsere Gesamtkataloge
Fräsen undMinimalmengenschmierung
Mircona Schneidwerkzeuge
REXIM...seit über 50 Jahren ein Begriff
für Qualitätswerkzeuge
Schleifen und Polieren
Mailing0113.qxp 13.02.2013 09:39 Seite 12
Prinect Color Editor:
Page is color controlled with Prinect Color Editor: 3.0.69 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com To view actual document colors and color spaces, please contact your local Heidelberg office in order to get a free Prinect Color Editor (Viewer) plug-in. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: HDPP sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: RGB2CMYK.icc Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: CmykMaxDot280.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: CmykMaxDot280.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 1.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: yes CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no