ROOF SPECIALTY PRODUCTS & FALL PROTECTION SYSTEMS · (102 mm) trade sizes 3” (76 mm) 4” (102 mm) 5” (127 mm) 6” (152 mm) 7” (178 mm) 8” (203 mm) 9” (229 mm) 10” (254

WWW.THALERMETAL.COM

Solution to ALL YOUR ROOFING NEEDS

ROOF SPECIALTY PRODUCTS &FALL PROTECTION SYSTEMS

ABOUT THALER METALThe Thaler Metal Industries Limited story starts around 1969 when Ken Thaler, formerly the Chief Estimator/Supervisor with a large roofing company in the 1950’s and 1960’s, recognized the need for a higher quality of roofing specialty products such as flashings, vents, roof drains, and other roof protrusion products. The high incidence of roof leaks, maintenance and labour intensive roofing specialty products inspired Ken to design and promote a superior line of roofing accessories that continue to be unequalled today.

FLOURISHING AMID THE CHALLENGES OF THE ROOFING INDUSTRYFrom the 1970’s to the 2000’s, Thaler developed, engineered and honed a multitude of roofing accessory products including mechanical and electrical protrusion flashings, roof supports (all disciplines), air vents, relief vents, suspended maintenance fall production safety anchors, davit arms and roof drains. All Thaler products have a number of “Value Added” features that should be considered when trying to equate the “Or Equal Factor”.

FOR EXAMPLE, THE SINGLE MOST IMPORTANT DEVELOPMENT AT THE CENTRE OF THE COMPANY’S ACCOMPLISHMENTS – AN INDUSTRY FIRST – IS THE INVENTION, BY KEN THALER, OF UNIQUE PATENTED EPDM FLASHING SEALS FOR MECHANICAL AND ELECTRICAL ROOF PENETRATIONS. IN GENERAL, ALL ROOF PENETRATIONS ARE SUBJECT TO THE HARMFUL EFFECTS OF CONDENSATION THAT IS RESPONSIBLE FOR UP TO 80% OF ALL ROOF LEAKS.

Today however, the Thaler EPDM Base Seal eliminates condensation and condensation buildup from below, and the Thaler EPDM Triple pressure Grommet Seal eliminates flashing leaks from above. The implementation of these EPDM flashing seals in a wide array of Thaler roofing products represent a new generation of roofing products that meet the requirements of air leakage control better than any protrusion type flashings on the market today.

THALER’S COMMITMENTIn keeping with a tradition for being innovative, Thaler is constantly thinking of new and better ways to enhance roofing system performance recognized dependability. Thaler always has a better idea (keep an eye on our advances in speciality products for metal roofs). Construction professionals will continue to benefit from Thaler’s commitment to providing state-of-the-art, consistently better roofing products while assuring architects, engineers, roofing consultants, specifiers, contractors, and building owners 100% roof penetration protection - an affirmation backed by the THALER 20 YEAR WARRANTY.

THALER METAL Synonymous with the VERY BEST in ROOFING PERFORMANCE and DEPENDABILITY.

Mission Statement - Business Philosophy

PG DIVISIONS

TABLE OF CONTENTS

Exhaust Vent Flashings

Stack Jack Flashings

Mechanical & Electrical Flashings

Architectural Roof Supports

Mechanical & Electrical Roof Supports

1

3

2

4

5

7

9 Relief Vents

10 Gravity Air Vents

11 Fall Arrest Roof Anchors (FARA) - TWA - Econo Anchor

13 Split Flashings

14 Horizontal Lifeline Systems

15 Roof Drains

17 Planning & Engineering Services

19 Roof Replacement Accessories

MISSION STATEMENT

To conscientiously listen to the needs of our partnering patrons and be obligated and accountable to provide technical knowledge, superior quality products and service they need to benefit their business.

KEN THALER

THALER BUSINESS PHILOSOPHY

Research, design and produce a range of roofing products that will outperform and provide longer life than any similar products being offered to the building industry.

1 |

CONCRETE DECK STEEL DECK

4"(102 mm)

7"(1

78 m

m)

13" o

r 19"

(330

or 4

83 m

m)

PATENTED

PREMOULDED TO INNER

(ALUMINUM, COPPER AND

EMBED DECK FLANGEIN LAYER OF PLASTIC CEMENT

TRIPLE PRESSURE GROMMET SEAL

EPDM BASE SEAL BONDED TO METAL SLEEVE

STAINLESS STEEL)

STACK JACK FLASHINGTHALER NEW-STANDARD

URETHANE INSULATION

SIDE OF SLEEVE

TRADE SIZES2” (51 mm)3” (76 mm)4” (102 mm)5” (127 mm)6” (152 mm)

MODEL HEIGHT

SJ-37 7” (178 mm) highSJ-38 13” (330 mm) highSJ-39 19” (483 mm) high

NEW-STANDARD STACK JACK™ FLASHING (Insulated)

CONVENTIONAL ROOFINGILLUSTRATED

INVERTED ROOFING ILLUSTRATED

VENT PIPE

STACK JACK FLASHINGS | 2

STACK JACK FLASHINGSTM

SJ-26 / SJ-27Removable CapSTACK JACK FLASHINGTM

SJ-37 / SJ-38 / SJ-39STACK JACK FLASHINGTM

SJ-31 VandalproofSTACK JACK FLASHINGTM

SJ-44 / SJ-45Sloped RoofSTACK JACK FLASHINGTM

SJ-33Vandalproof Vent CapSTACK JACK FLASHINGTM

SJ-VPC VandalproofSTACK JACK FLASHINGTM





SJ-31 VandalproofSTACK JACK FLASHINGTM

SJ-44 / SJ-45Sloped RoofSTACK JACK FLASHINGTM

SJ-33Vandalproof Vent Cap

SJ-VPC VandalproofSTACK JACK FLASHINGTM



EXHAUST VENT FLASHINGS

EVF-1 / EVF-2Exhaust Vent Flashing

EVF-1Exhaust Vent Flashing


EVF-1Exhaust Vent Flashing


3 | EXHAUST VENT FLASHINGS

MODEL HEIGHT

EVF-1 12” (305 mm) highEVF-2 12” (305 mm) high

EXHAUST VENT FLASHINGSPatented

EPDM BASE SEAL BONDEDTO METAL SLEEVE (SEETHALER EPDM FLASHINGSEALS LITERATURE)THALER EXHAUST VENT

FLASHING (ALUMINUM,COPPER OR STAINLESSSTEEL)

REMOVABLE HOOD (ALUMINUM,COPPER ORSTAINLESS STEEL)

4” (102 mm)

TRADE SIZES3” (76 mm)4” (102 mm)5” (127 mm)6” (152 mm)7” (178 mm)8” (203 mm)9” (229 mm)

10” (254 mm)

STEEL DECK CONCRETE DECK


EXHAUST VENT

EVF-2(PERFORATED COLLAR)

URETHANE INSULATIONPRE-MOLDED BETWEENINNER AND OUTERSLEEVE

EVF-1 (SLOTTED COLLAR)

CHERRY RIVETS HAVING8274 kPa (1200 psi)SHEARING STRENGTH

STAINLESS STEELSCREWS (TWO TOTAL)

12”

(305

mm

)

Add suffix -A for Aluminum or -Cfor Copper to Model No. e.g. EVF-1-A, etc.

MECHANICAL & ELECTRICAL FLASHINGS | 4

MECHANICAL & ELECTRICALFLASHINGS

MEF-1Rigid Conduit Flashing

MEF-2AFlexible Conduit Flashing

MEF-3AHot Pipe Flashing

MEF-AE1 Type BRigid Conduit Flashing

MEF-4A“B” Vent Flashing

MEF-AE1 Type ASingle Rigid Conduit Flashing

MEF-2A1Liquid Tight FlexibleConduit Flashing

MEF-9Modcon Gas Pipe Flashing

MEF-1Rigid Conduit Flashing

MEF-2AFlexible Conduit Flashing

MEF-3AHot Pipe Flashing

MEF-AE1 Type BRigid Conduit Flashing

MEF-4A“B” Vent Flashing

MEF-AE1 Type ASingle Rigid Conduit Flashing

MEF-2A1Liquid Tight FlexibleConduit Flashing

MEF-9Modcon Gas Pipe Flashing

MEF-2A/MEF-2A1/MEF-2A2 LIQUID TIGHT FLEXIBLE CONDUIT FLASHINGPatented

EPDM BASE SEAL, BONDED TO METAL BASE (SEE THALER EPDM FLASHINGSEALS LITERATURE)

THALER MEF-2A LIQUIDTIGHT FLEXIBLE CONDUITFLASHING

CONCRETE DECKSTEEL DECK

EMBED DECK FLANGE IN LAYER OF PLASTIC CEMENT

LIQUID TIGHT FLEXIBLE CONDUIT (BY OTHERS)

#14 x 2”, COUNTERSUNK STAINLESSSTEEL SCREWS (QUANTITY DIFFERSBETWEEN MODELS).

EPDM END CAP SEAL, FRICTION FIT TO METAL PIPE (SEE THALER EPDM FLASHINGSEALS LITERATURE)

WOOD BLOCKING TO MATCH DECK FLANGE WIDTH, LENGTH ANDINSULATION THICKNESS (BY OTHERS)


3D-VIEW SHOWING MEF-2A1 MODEL

RE

FER

TO

TE

CH

NIC

AL

BIN

DE

R

4”(102 mm)

ARCHITECTURAL ROOF SUPPORTS

ARS-115Rail Post

ARS-400Flag Pole or Rail Roof Support

ARS-122Satellite Dish Roof Support

ARS-450 A/C UnitScreen Roof Support

ARS-133Antenna Roof Support

ARS-510Metal Stair Roof Support

ARS-102Fire Route Walkway

ARS-200 & ARS-210Trellis and BraceRoof Support

ARS-530Stair Platform Roof Support

ARS-540Upright Angle Roof Support

ARS-550Miscellaneous PlateRoof Support

ARS-115Rail Post

ARS-400Flag Pole or Rail Roof Support


ARS-450 A/C UnitScreen Roof Support

ARS-133Antenna Roof Support

ARS-510Metal Stair Roof Support

ARS-102Fire Route Walkway

ARS-200 & ARS-210Trellis and BraceRoof Support

ARS-530Stair Platform Roof Support

ARS-540Upright Angle Roof Support

ARS-550Miscellaneous PlateRoof Support

ARS-520Metal Stair Roof SupportOffset Stringer

5 | ARCHITECTURAL ROOF SUPPORTS

ARCHITECTURAL ROOF SUPPORTS | 6


ARS-680Cross-Over Stair

ARS-685 Tilt-Up AccessLadder & Roof Support


ARS-680Cross-Over Stair

ARS-685 Tilt-Up AccessLadder & Roof Support

ARS-575 TriangularAntenna Roof Support

CONCRETE DECK

STACK JACK FLASHING URETHANEINSULATED, 12" (305 mm) HIGHSLEEVE (ALUMINUM, COPPEROR STAINLESS STEEL)

INVERTED ROOFING ILLUSTRATED

STAINLESS STEEL STUD

CONSULT STRUCTURAL ENGINEER FOR I BEAMSTRENGTH REQUIREMENTS

STEEL PLATE(SEE CHART)

18 GA. (1.2 mm) GALVANIZED CLOSURE PLATE SCREWFASTENED TO STEEL DECK

STEEL DECK

ALL STEEL COMPONENTS EPOXYPRIMED AS STANDARD.FOR GALVANIZED FINISHADD SUFFIX -G TO MODEL NUMBER, I.E. ARS-550-1-G


HSS WELDED TO BASE PLATE USING 5/16" (8 mmFILLET WELD (SEE CHART)

EPDM BASE SEAL BONDED TOMETAL SLEEVE (SEE THALER EPDMFLASHING SEALS LITERATURE)

4"(102 mm)

4-1/

2"(1

14 m

m)

SUPPORT PLATE.SEE CHART FOR SIZES

FOUR S.S. BOLTS AND NUTS (SEE CHART FOR DIA. SIZES)


CONTINUOSLY WELDEDGUSSET PLATE


STEEL PLATE(SEE CHART)

ARS-550, 550-1, 550-2 MISCELLANEOUS ROOF SUPPORTPATENTED

1/4" X 8" X 8"(6 mm x 203 mm x 203 mm)

(12 mm x 305 mm x 305 mm)1/2" x 12" x 12"

3/4" x 12" x 12"(19 mm x 305 mm x 305 mm)

PLATE

1/2" X 6" X 6"

(16 mm x 203 mm x 203 mm)

(13 mm x 152 mm x 152 mm)

(10 mm x 102 mm x 102 mm)

HSS SUPPORT PIPENUMBER

ARS-550

ARS-550-1

ARS-550-2

MODEL

2-3/8"14"

(356 mm)14"

14"(356 mm)

(356 mm)

(114 mm)4-1/2"

3-1/2"

(60 mm)

(89 mm)

Height Outside Ø

(25 mm)1"1/4"

(51 mm)

(51 mm)

(6 mm)

(6 mm)

(6 mm)

1/4"

1/4"

2"

2"

THREAD

Thickness Ø

1/4" X 12" X 12"

3/4" X 12 "X 12"(19 mm x 305 mm x 305 mm)

3/8" X 12" X 12"(10 mm x 305 mm x 305 mm)

(6 mm x 305 mm x 305 mm)

Bolt

3/8" X 4" X 4"

5/8" X 8" X 8"

SecurementWeld

Securement

(16 mm)

(10 mm)

(6 mm)1/4"

5/8"

3/8"

FASTENINGBOLT Ø

FOR SUPPORTS OTHER THAN STANDARD 14" (356 mm) HEIGHT, ADD SUFFIX "NS" TO MODEL NUMBER I.E. ARS-550-2/NS

Please be advised Thaler products may undergo improvements from time to time and are subject to change without notice.

SUPPORT BASE PLATE

MERS-925 Air HandlingUnit Roof Support

MERS-915A Air HandlingUnit Roof SupportSmall Multiple Units

MECHANICAL & ELECTRICALROOF SUPPORTS

MERS-700 TerraceLighting Roof Support

MERS-707 Gas Line / ConduitRoof Support

MERS-740 MiscellaneousLighting Roof Support

MERS-650 Re-RoofingLarge Pipe Support

MERS-605Double Pipe Support

MERS-610 Pipe Support(single, insulated)

MERS-615 Pipe Support(double, insulated)

MERS-600A Pipe Support

MERS-708 Tiered GasLine Roof Support

MERS-730 SecurityLighting Roof Support

MERS-850ARe-Roofing Duct Support

MERS-900A Air HandlingUnit Roof Support

MERS-800ADuct Support

7 | MECHANICAL & ELECTRICAL ROOF SUPPORTS

MERS-925 Air HandlingMERS-915A Air Handling

MERS-700 TerraceLighting Roof Support

MERS-707 Gas Line/ConduitRoof Support

MERS-740 MiscellaneousLighting Roof Support

MERS-650 Re-RoofingLarge Pipe Support

MERS-605Double Pipe Support

MERS-610 Pipe Support(single, insulated)

MERS-615 Pipe Support(double, insulated)

MERS-600A Pipe Support

MERS-708 Tiered GasLine Roof Support

MERS-730 SecurityLighting Roof Support

MERS-850ARe-Roofing Duct Support

MERS-900A Air Handling

MERS-800ADuct Support

MERS-910 Re-Roofing AirHandling Unit Roof Support

MERS-930A Re-Roofing AirHandling Unit Roof Support

MECHANICAL & ELECTRICAL ROOF SUPPORTS | 8

MERS-709 Combo PipeSupport & Cross Over Stair

MERS-630 Aluminum PipeSupport (large, insulated)

MERS-930A Re-Roofing Air

MERS-709 Combo PipeSupport & Cross Over Stair

MERS-630 Aluminum PipeSupport (large, insulated)

MERS-900A Air HandlingUnit Roof Support

T-300 ALUMINUM PIPE 2" (51 mm) DIA. URETHANE INSULATED WELDED TO 3/8" x 8" x 8" (9 mm x 204 mm x 204 mm)ALUMINUM PLATE

4"(102mm)

2" (5

1mm

)

2" (5

1mm

)

STAINLESS STEEL STRAP

NOTE:AVAILABLE SIZES 11" TO 22"(270 mm TO 559 mm) IN 1" INCREMENTSSIZES 11"TO 17" (279 TO 432 mm)PROVIDE UP TO 1" (25 mm ) ADJUSTMENTSIZES 18" UP TO 22" (457 mm TO 559 mm)PROVIDE UP TO 4" (102 mm) ADJUSTMENT

STAINLESS STEEL SET SCREW

STAINLESS STEEL BOLT

EMBED DECK FLANGE IN LAYER OF PLASTIC CEMENT (BUR)

EPDM BASE SEAL BONDED TO METAL SLEEVE

ACCOMMODATES PIPE SIZES FROM 2' TO 8" (51 mm TO 203 mm)

BUILT-UP ROOFING ILLUSTRATED (SEEINSTALLATION)

EPDM TRIPLE PRESSURE GROMMET SEAL

EXTRUDED ALUMINUM CARRIER ASSEMBLY (T-165, T-175)

SJ-34 STACK JACK (NON-INSULATED)SJ-37 STACK JACK (INSULATED) AVAILABLE ALUMINUM, COPPER OR STAINLESS STEEL

F3Specify the fastening method required by adding the appropriate suffix to a model number (e.g. MERS-615A-F2).

F7F2 F5

FASTENING METHODS

AVA

ILAB

LE 1

1" T

O 2

2' (2

79 m

m T

O 5

59 m

m)

SEE

NO

TE B

ELO

W

MERS-615A ALUMINUM PIPE SUPPORT (Double Insulated Pipe)PATENTED

RELIEF VENTS

RV-2A / RV-2CTwo Way Relief Vent


RV-3A / RV-3COne Way Relief Vent




9 | RELIEF VENTS

REMOVABLE HOOD FOR MOISTURE CHECKING

0.064" (1.6 mm) ALUMINUM, 24 oz. (0.831 mm)) COPPER REMOVABLE CONICAL HOODFITTED WITH PERFORATED COLLAR

RIVETS

STAINLESS STEEL SCREWS

0.064" (1.6 mm) ALUMINUM, OR 24 oz. (0.831 mm) COPPER SLEEVE URETHANE INSULATE

12" (

305

mm

)

3-3/

4" (8

6 m

m)

4" (102 mm)

3-1/2" (89 mm)

4-1/2" (114 mm)

12" (305 mm) DIA.

BITUMINOUS PAINTED INSULATION INSERT ACCESSORY. LOWER HALF PERFORATED WITH 1/4" (6 mm) DIA. HOLES.

RV-2A ALUMINUM, RV-2C COPPER RELIEF VENTPATENTED

GRAVITY AIR VENTS

GAV-2A / GAV-2C / GAV-2SSGravity Air Vent (large)

GAV-3A / GAV-3C / GAV-3SSGravity Air Vent(small-slope roof)

GAV-4A / GAV-4C / GAV-4SSGravity Air Vent(large-slope roof)

GAV-2A / GAV-2C / GAV-2SSGravity Air Vent (large)

GAV-3A / GAV-3C / GAV-3SSGravity Air Vent(small-slope roof)

GAV-1A / GAV-1C / GAV-1SSGravity Air Vent (small)

GRAVITY AIR VENTS | 10

144 Square inches (930 cm2) of free venting area is required to vent 300 square feet of roof area (1/300). A minimum of two vents are required to vent any individual roof area. Venting efficiency is increased in direct proportion to the number of vents used.

on a 300 square foot (28 m²) roof is preferable to using two vents, each with72 square inches (464 cm²) of free venting area. Increasing the number of vents, while maintain the required total amount of free venting area by decreasing the size of the individual vents allows air to drawn from the corners of the roof, thereby increasing overall venting efficiency, and avoiding condensation formation.

REMOVABLE CONICAL HOOD (FOR CLEANING) FITTED WITH THREE SUPPORT BRACKETS.0.064" (1.6 mm) ALUMINUM,24 oz. 0.032" (0.831) COPPER OR22 ga. 0.031" (0.79 mm) STAINLESS STEEL.

STAINLESS STEEL SCREW

STAINLESS STEEL SCREW

SLEEVE WITH INTEGRAL DECK FLANGE 0.064" (1.6 mm) ALUMINUM, 24 oz. 0.032" (0.831 mm) COPPER OR22 ga. 0.31" (0.79 mm) STAINLESS STEEL.

STAINLESS STEEL WOOD SCREWON 6" (162 mm) APPROX. DISTANCE

4.5" (114 mm)3" ( 76 mm)

12" (

305

mm

)

INSECT SCREEN

3" (75 mm)

4" (1

02 m

m)

"A"


T-8 BITUMEN PROTECTION (OPTIONAL)

3 PLY FELT FLASHING OVER FLANGEAND 4" (102 mm), 6" (152 mm), AND 8" (203 mm) ONTO ROOF

WHEN ORDERING, STATE INSIDE DIAMETER (ID) OF VENT PIPE

AVAILABLE DIAMETERS "A"

3" (75 mm) 4" (102 mm) 5" (127 mm) 6" (152 mm) 7" (178 mm) 8" (203 mm) 9" (229 mm)10" (254 mm)

GAV-1A, GAV-1C, GAV-1SS GRAVITY AIR VENTS (Small Size Vents)

CONCRETE DECK STEEL DECK

CALCULATING THE NUMBER OF GRAVITY AIR VENTS

For example: Four vents each with 36 square inches (232 cm²) of free venting area

FALL ARREST ROOF ANCHORS

11 | FALL ARREST ROOF ANCHORS

FARA -2/ -12 / -12SS /-12U / -12USSAdhesive Bolt

FARA -3/ -13 / -13SS /-13U / -13USSBolt Around Beam

FARA -33/ -43 / -43SS/ -43U / -43USSFARA -35/ -45 / -45SS/ -45U / -45USS

FARA -4/ -14 / -14SS /-14U / -14USSWeldable

FARA -5/ -15 / -15SS /-15U / -15USSCast In Place

FARA -3/ -13 / -13SS /-13U / -13USSBolt Around Beam

FARA -1 / -11 / -11SS /-11U / -11USSBolt Through

FARA -32/ -42 / -42SS /-42U / -42USS“SWIVEL EYE” Adhesive Bolt

FARA -33/ -43 / -43SS /-43U / -43USS “SWIVEL EYE”Bolt Around Beam

FARA -34/ -44 / -44SS /-44U / -44USS“SWIVEL EYE” Weldable

FARA -31/ -41 / -41SS /-41U / -41USS“SWIVEL EYE” Bolt-Through

FARA -37/ -47 / -47SS /-47U / -47USS “SWIVEL EYE”Pre Cast Core Bolt

FARA -82 / -92 / -92U /WALL ANCHORCast In Place

FARA -96TERRACE ANCHOR

FARA -84/ -94 / -94SS /-94U / -94USSCladding Bolt

FARA -96A / -106A / -106ASS /-106AU / -106AUSS High FallArrest Terrace Roof Anchor

FARA -36/ -46 / -46SS /-46U / -46USS “SWIVEL EYE”Bolt Around OWSJ

FARA -150DAVIT Arm Base

FARA -155Movable DAVIT Arm

FARA -170 Swivel OutriggerBeam and Arm

FARA -180Fall Arrest “Rope Drop” Anchor

FARA -96A / -106A / -106ASS /-106AU / -106AUSS High Fall

FARA -96B / -106B / -106BSS /-106BU / -106BUSS High FallArrest Terrace Roof Anchor

FARA -2/ -12 / -12SS /-12U / -12USSAdhesive Bolt

FARA -4/ -14 / -14SS /-14U / -14USSWeldable

FARA -5/ -15 / -15SS /-15U / -15USSCast In Place

FARA -1 / -11 / -11SS /-11U / -11USSBolt Through

FARA -32/ -42 / -42SS /-42U / -42USS“SWIVEL EYE” Adhesive Bolt

FARA -33/ -43 / -43SS /-43U / -43USS “SWIVEL EYE”Bolt Around Beam

FARA -34/ -44 / -44SS /-44U / -44USS“SWIVEL EYE” Weldable

FARA -31/ -41 / -41SS /-41U / -41USS“SWIVEL EYE” Bolt-Through“SWIVEL EYE” Bolt-Through

FARA -37/ -47 / -47SS /-47U / -47USS “SWIVEL EYE”Pre Cast Core Bolt

FARA -82 / -92 / -92U /WALL ANCHORCast In Place

FARA -96TERRACE ANCHOR

FARA -84/ -94 / -94SS /-94U / -94USSCladding Bolt

FARA -96A / -106A / -106ASS /-106AU / -106AUSS High FallArrest Terrace Roof Anchor

FARA -36/ -46 / -46SS /-46U / -46USS “SWIVEL EYE”-46USS “SWIVEL EYE”Bolt Around OWSJ

FARA -150DAVIT Arm Base

FARA -155Movable DAVIT Arm

FARA -170 Swivel OutriggerBeam and Arm

FARA -180Fall Arrest “Rope Drop” Anchor

FARA -96A / -106A / -106ASS /-106AU / -106AUSS High Fall

FARA -96B / -106B / -106BSS /-106BU / -106BUSS High FallArrest Terrace Roof Anchor

TWA (ECONO) ANCHORSASK ABOUT THIS PRODUCT

FROM OUR TEAM OF ENGINEERS

(ECONO) ANCHORS THATMEET ALL CANADIAN AND

U.S. STANDARDS ATCOMPETITIVE PRICING

Arrest Terrace Roof Anchor-Top View

FALL ARREST ROOF ANCHORS | 12

FARA -100 / -101 / -110 /Fall Arrest Rope Stop

FARA -7/ -17 / -17SS /-17U / -17USSPre Cast Core Bolt

FARA -35/ -45 / -45SS /-45U / -45USS “SWIVEL EYE”Cast in Place

FARA -85/ -95 / -95U /Wall Anchor

FARA -100 / -101 / -110 /Fall Arrest Rope Stop

FARA -7/ -17 / -17SS /-17U / -17USSPre Cast Core Bolt

FARA -35/ -45 / -45SS /-45U / -45USS “SWIVEL EYE”Cast in Place

FARA -85/ -95 / -95U /Wall Anchor

FARA -1500Recessed David Arm Base

1/4' x 4-1/2" DIA. (6 mm x 114 mm ) HSS WELDED TO 5/8" x 8" x8"(16 mm x 203 x 203 mm)BASE PLATE USING 5/16"(8 mm ) FILLET WELD, ALL HOT DIP GALVANIZED AND URETHANE INSULATED TO PREVENT CORROSION.

FORGED EYE AND BASE WELDED TO HSS PIPE AND HOT DIP GALVANIZED

FOUR 5/8" (16 mm) S.S. BOLTS, LOCK WASHERAND NUTS

EPDM BASE SEALBONDED TO METAL SLEEVE(SEE THALER EPDM FLASHING SEALS LITERATURE)

5/8" x 8" x 8" (16 mm x203 mm x 203 mm) PLATE

DEFORM THREADSAS PER CSA OR OSHA GUIDELINE

THALER SJ-37(9) NEW STANDARD STACK JACK FLASHING (ALUMINUM, COPPER OR STAINLESS STEEL)

INVERTED ROOFILLUSTRATED (BUR)

CONVENTIONAL ROOF ILLUSTRATED (BUR)

GUSSET PLATESBY OTHERS (WHEN REQUIRED)

4-1/2" (114 mm)

3-1/4" (82 mm)

14" (

356

mm

)12

-5/8

" (32

1 m

m )

18 GA. GALVANIZED CLOSURE PLATE SCREWFASTENED TO STEEL DECK

EMBED DECK FLANGE IN LAYER OF PLASTIC CEMENT (BUR)


FARA-3/-13/-13U FALL ARREST ROOF ANCHORS (Bolt Around Beam)PATENTED

FORGED EYE(FARA-3/-13)

U BOLT EYE(FARA-13U)

FARA-13

FARA-3

Anchor Type

FARA-13U

ALL TESTING REPORTS AVAILABLE UPON REQUEST

Forged Eye, Stainless Steel

U Bolt, Stainless Steel

Forged Eye, Galvanized

Eye Construction

Load Direction

Deflection After Load of 5400 lbs (24.03 kN) was Released

Perpendicular to the eye (x)

0.016"(0.406 mm)

0.046"(1.168 mm)

xy

Note: Anchors are designed to resist without fracture and/or pull-out a force of 5400 lbs (24.03 kN), applied in the most adverse direction (x).

0.203"(5.156 mm)

Parallelto the eye (y)





0.008"(0.203 mm)

0.019"(0.482 mm)

0.013"(0.330 mm)

Typical tie-offdirection

All stainless steel anchor alsoavailable (FARA-13SS/-13USS)e.g. eye, HSS, base plates,fastening and flashing.

* FOR NON-STANDARD ALTERNATIVES PLEASE CONTACT OFFICE

SPLIT FLASHINGS

13 | SPLIT FLASHINGS

SPJ-2Round Split Flashing

SPJ-3Square Split Flashing

SPJ-4Square Split FlashingVented Cap


SPJ-3


0.018" (26 ga.) TYPE 304STAINLESS STEEL CAP

0.018" (26 ga.) TYPE 304STAINLESS STEEL SLEEVE

S.S INSTALLATION CLAMPING CLIPS SPOT WELDED TO SLEEVE ON TWO SIDES (3 OR 4 CLIPS DEPENDING ON HEIGHT)

5" (127 mm)


PATENTED

1/8" (3 mm) STAINLESS STEEL SCREW

12" (

305

mm

) OR

18"

(457

mm

)

1" (2

5 m

m)

3 PLY FELT FLASHING OVER FLANGE 4" (102 mm) 6" (152 mm) AND 8" (203 mm) ONTO ROOF


TOP VIEW OF CAP

KCED ETERCNOCKCED LEETS

SPJ-3 SQUARE SPLIT FLASHING PATENTED

TERMINAL END HORIZONTAL LIFELINE ANCHOR (K-FARA-93-709)PATENT PENDING

PLAN VIEW

FRONT VIEW

CARABINER

SHACKLE

THALER ENERGY ABSORBER (TEA)

STAINLESS STEEL SWAGED END

3/8" (10 mm) S.S.END BRACKET WELDED TOTO 5/8" x 8" x 8" (16 mm x 203 mm x 203 mm) S.S. WALL PLATE

CONTINUOUS CAULKINGAROUND WALL PLATES (BY OTHERS)

CONTINUOUS 5/16 (8 mm)FILLET WELD

FOUR 5/8" (16 mm) ADHESIVE FASTENERS(RETROFIT APPLICATION)

MINIMUM 5" (127 mm)

MINIMUM 6" (152 mm)

SECTION VIEW

SHACKLE

THALER ENERGY ABSORBER (TEA)

2-3/4" (70 mm)

30'-0" (9.15 m) MAX. SPACING BETWEEN ANCHORS FOR SYSTEM WITH ONE ENERGY ABSORBER

30'-0" TO 60'-0" (9.15 TO 18.3 m)FOR SYSTEM WITH TWO ENERGY ABSORBERS

304 3/8" (10 mm) STAINLESS STEEL CABLE,7 x 19 STRUCTURE

Top View of End Wall AnchorWith Mobile Shuttle Runner

NOTE: ADHESIVE FASTENING ANCHORSECUREMENT IS ILLUSTRATED (RETROFIT APPLICATION). SEE PAGE K-3AFOR OTHER FASTENING METHODS

HORIZONTAL LIFELINE SYSTEMS | 14

HORIZONTAL LIFELINE SYSTEMS

K-700 (4) Shackle Connectionwith Tensioner

K-700 (7)Shuttle on Cable

K-700 (9)Single Straight Line

K-700 (10)Corner Anchor

K-700 (4) Shackle Connectionwith Tensioner

K-700 (7)Shuttle on Cable

K-700 (9)Single Straight Line

K-700 (3)Terminal Corner Anchor withTensioner and Energy Absorber

MaintenancePersonnelWorking AroundLow Parapet andNarrow Roof Area,a Typical FallHazard Area

Montage Illustration Shows K-701 EASY SLIDER Horizontal Lifeline Fall ProtectionSystem For Walls

Corner WallAnchorK-FARA-93-711WithEASY SLIDERShuttle (90° AngleIllustrated)

Any-Angle Corner Anchor K-FARA-93-712 And EAASY SLIDERShuttle

EndAnchor

IntermediateAnchor

Corner Anchor(90° Illustrated)

EASY SLIDERLifeline

End Tensioner

Intermediate WallAnchorK-FARA-93-710With Thaler EASYSLIDER Shuttle

End Anchor

Thaler Energy Absorber (TEA)

Terminal End AnchorK-FARA-93-709 (adhesive bolt fastening for retrofit applications)

Any-AngleCorner Anchor

Corner Anchor(Any Angle)

Roof AccessHatch

6’-6” (1.98 m)Recommended TypicalSpacing From Roof Edge

ShackleCarabiner

Swaged End

Terminal End AnchorK-FARA-93-709 With Thaler EnergyAbsorber (TEA). Adhesive Bolt Fastening For Retrofit Applications

TM EASY SLIDER is a registered trade mark of Thaler Metal industries Ltd. Patent and design pending

K-700 EASY SLIDER(Roof Application)

K-701 EASYSLIDER (WallApplication)

Inset Shows Top View of Corner Scenario

Top View ofInternal CornerAnchor

ROOF DRAINS

15 | ROOF DRAINS

RD-14 VandalproofRoof Drain

RD-14 RR VandalproofRoof Drain



RD4-RR VandalproofRoof Drain

RD-4 Vandalproof Roof Drain RD-4-8, RD4-10 Vandalproof BigRoof Drain with New 16” Dome

RD-7 RR Vandalproof Roof Drain

RD-1C Vandalproof CopperRoof Drain


RD-19 SS Stainless SteelRoof Drain




RD-24-8, RD-24-10Vandalproof Roof Drain

RD-28 Economy Roof Drain RD-28 RR EconomyRetrofit Roof Drain

RD-24 RR VandalproofRetrofit Roof Drain

RDX-30 RR EconomyRetrofit Roof Drain

RDX-30 Economy Roof Drain RD-38 Economy Roof Drain RD-38 RR Economy RetrofitRoof Drain

RDX-300 Economy Roof Drain RDX-300 RR EconomyRetrofit Roof Drain





RD4-RR VandalproofRoof Drain

RD-4 Vandalproof Roof Drain RD-4-8, RD4-10 Vandalproof BigRoof Drain with New 16” Dome

RD-7 RR Vandalproof Roof Drain

RD-1C Vandalproof CopperRoof Drain


RD-19 SS Stainless SteelRoof Drain




RD-24-8, RD-24-10Vandalproof Roof Drain

RD-28 Economy Roof Drain RD-28 RR EconomyRetrofit Roof Drain

RD-24 RR VandalproofRetrofit Roof Drain

RDX-30 RR EconomyRetrofit Roof Drain

RDX-30 Economy Roof Drain RD-38 Economy Roof Drain RD-38 RR Economy RetrofitRoof Drain

RDX-300 Economy Roof Drain RDX-300 RR EconomyRetrofit Roof Drain

RDX-30 RR Roof Drain

12" (

305

mm

) FO

R A

LUM

INU

M,

9" (2

29 m

m) F

OR

CO

PP

ER

AN

D

STA

INLE

SS

STE

EL,

STA

ND

AR

D

STEEL DECKCONCRETE DECK

EPDM PRESURE PLUG

CAST ALUMINUM STRAINER

3/8" (9 mm) STAINLESS STEEL RETAINING BOLT

STAINLESS STEEL BOLTAND NUT

0.064" (1.6 mm) ALUMINUM FUNNEL TYPE STRAIGHT OUTLET

STAINLESS STEEL WASHER AND NUT

CONVENTIONAL ROOF DECK ILLUSTRATED (EPDM)

T-12 STAINLESS STEEL BALLAST GUARD

T-7 ALUMINUMFLOW CONTROL ACCESSORY

EPDM SUPER-SEAL

EXISTING RAINWATER LEADER

URETHANE INSULATION (BY OTHERS) IS RECOMMENDED ONLY FOR DEPTH OF DECK TO ELIMINATE COLD SPOT AND CONDENSATION. PREVENTS ICE BUILD-UP IN WINTER AND MOISTURE DRIPPING TO SPACE BELOW IN SPRING

Note: Specify accessories required by adding appropriate suffix to model number e.g. RDX30-A-T-6 for ferrule, T-7 for flow control, T-10 stainless steel underdeck clamp and T-12 for stainless steel ballast guard.

T-10 STAINLESS STEEL UNDERDECKCLAMP (OPTIONAL)

15" (381 mm)

ALUMINUM STRAINER RETAINER/MEMBRANE COMPRESSION UNIT

CONVENTIONAL ROOF DECK ILLUSTRATED (EPDM)

RDX30-A-RR RETROFIT ROOF DRAIN (Aluminum, Funnel Type Outlet)RDX30-C-RR RETROFIT ROOF DRAIN (Copper, Funnel Type Outlet)

RDX30-SS-RR RETROFIT ROOF DRAIN (Stainless Steel, Funnel Type Outlet) Note: RDX30-C-RR (Copper) and RDX30-SS-RR (Stainless Steel) similar. See reverse side

of page for material changes.

15

ROOF DRAINS | 16

RD-7-8 Vandalproof Roof Drainwith New 16” Dome

RD-19 SS-RR Stainless SteelRetrofit Roof Drain

RD-29 RR EconomyRoof Drain

DD-1A Terrace Deck Drain

RD-7-8 Vandalproof Roof Drainwith New 16” Dome

RD-19 SS-RR Stainless SteelRetrofit Roof Drain

RD-29 RR EconomyRoof Drain

RD-39 Economy Roof Drain

DD-1 TERRACEDECK DRAIN

FLOOR DRAIN

RD-19-SS-BDB(Bolted Drain Body)

RD-19-SS

PLANNING & ENGINEERINGSERVICES

17 | PLANNING & ENGINEERING SERVICES

Engineered stamped layout or shop drawings for any fall protection scenario, including section details, can be produced for any building and any structural condition without obligation providing Thaler products are specified. Following the requirements of OSHA, labour regulations, safety standards or other regulatory bodies, roof anchors are located to provide the safest and most economical layout possible. Detailed installation instructions are supplied with every Thaler product for installation by others, or by Thaler if desired.

SAMPLESThaler will supply samples at no charge to specifiers on request, provided samples are returned upon completion of the evaluation.

SPECIFICATIONSSpecifications (Section Format) for fall protection roof anchors detailing the product, installation methodology, and structural loads are also provided.

ESTIMATING / PRICINGAn estimate can be provided for any roof anchor project based upon a published price list of all products supplied that is available upon request.

CUSTOM PRODUCTSThe need for custom designed products arises in many instances. Thaler can design, test and produce custom products to provide a workable solution. Simply provide the structural drawings, a roof plan, and building elevations, and Thaler will produce a layout, review it with the architect, engineer or specifier, refine it where necessary, and construct a prototype for acceptance and testing.

PLANNING & ENGINEERING SERVICES | 18

ROOF ACCESSORIES

T-5 Sediment Collar

T-6 Ferrule

T-7 Flow Control

T-9 Super Seal

T-10 Underdeck Clamp

T-12 Stainless SteelBallast Guard

Emseal Tape

T-13 Cast Aluminum Strainer(for RDX-30)

T-14 Cast Aluminum Strainer(RD-28 & RD-29)

T-15 Cast Aluminum Strainer (RD-4)

T-16 Cast Aluminum Strainer(for RD-7, RD-24)

New 16” Thaler Domes

T-17 Cast Aluminum Strainer(for RD-4-8, RD-4-10,

RD-7-8, RD-24-8, RD-24-10)

T-18 Cast Aluminum Strainer(for RD-14, RD-16)

T-19 Cast Aluminum Strainer(RD-38, RD-39)

T-20 PVC Strainer (RD-28, RD-29)

19 | ROOF ACCESSORIES

Roof Accessories

Replacement Roof Accessories

T-5

T-7

T-6

T-9

T-10

T-12

T-20

T-14 T-13

T-15 T-17

T-19

T-18

Emseal Tape

T-16

For a complete listing of all Thaler Roofing Products please refer to our Comprehensive Technical Binder.

LET US TELL YOU ABOUT THE THALER METAL DIFFERENCE!

WWW.THALERMETAL.COM

WWW.THALERMETAL.COM

HEAD OFFICEThaler Metal Industries Ltd.3857 Nashua DriveMississauga, ON L4V 1R3, CANADATEL. 905-677-1520 / 1-800-387-7217FAX 905-677-1503

USA Thaler Metal USA Inc.USA-CDN TOLL-FREE 1-800-576-1200USA Thaler Metal USA Inc.USA-CDN TOLL-FREE 1-800-576-1200

Documents

ROOF SPECIALTY PRODUCTS & FALL PROTECTION SYSTEMS · (102 mm) trade sizes 3” (76 mm) 4” (102 mm) 5” (127 mm) 6” (152 mm) 7” (178 mm) 8” (203 mm) 9” (229 mm) 10” (254