Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
ROTOR Bike Components is proud to present its ultra rigid and lightweight 3D+ crankset, based on the successful 3D crank, designed to complement Cervélo’s proprietary BBright standard perfectly.
rotorbike.com
ROTOR 3D+ is a light-weight aluminium, purebred performance crank:470 g for 170/110 BCD (w/o BB and chainrings).
3D+ cranks have an improved version of our proprietary “Trinity drilling system” technology. Due to the larger, 30 mm diameter axle-crank contact area of a BBright crank, all three holes can be drilled from the axle side of the crank arm, allowing for further optimisation of wall thicknesses, improving both the weight and the weight-rigidity ratio of the crank arm.
Certified to EN 14781 standard.
540
560
440
460
480
500
520
WEIGhT (g)
CRANKsETs
Shimano Dura-Ace 7900ROTOR 3D ROTOR 3D+
TEsT mEThOD
Mount the assembly of the two pedal-spindle adaptors, the two cranks, the chain-wheel set, and the bottom-bracket spindle locate on its normal-production bearings. Incline the cranks at 45° to the horizontal.
Apply repeated, vertical, dynamic forces of 1 800 N alternately to the pedal-spindle adaptors of the left- and right-hand cranks at a distance of 65 mm from the outboard face of each crank for 100 000 cycles. The direction of the force on the right-hand crank shall be downward and that on the left-hand crank shall be upwards for a rearward-pointing crank or downwards for a forward-pointing crank. The maximum test frequency shall be 25 Hz.
ABOUT ROTOR BIKE COmPONENTs
ROTOR Bike Components is a Spanish cycling component manufacturer dedicated to intelligent and truly innovative design with unmatched, in-house, precision manufacturing. ROTOR produces finely engineered bicycle components that make cycling simultaneously faster, more efficient and more comfortable.
An impressive specific stiffness figure. The 3D+ maintains the impressive stiffness to weight ratio of the 3D crankset, well known in the market for its extreme rigidity as proven by the Cervélo TestTeam, making 3D+ the best choice for the cyclist worried about weight but concerned about stiffness.
COmPATIBILITIEs
High precision bearing pre-load adjustability achieved with a compression ring with locknut. Compatible with nearly every bottom bracket
standard in the market.
COMPATIBLE WITH
· Cervélo frames with proprietary BBright.· Standard BB30 frames (68mm bottom bracket width).· Classic BSA threaded frames, by means of a specific BB which adapts the frame for a BBright crank.
For further information visit: rotorbike.com
25
15
17
19
21
23
sPE
CIF
IC s
TIFF
NE
ss (d
aN/m
m/g
)sPECIFIC sTIFFNEss CRANKs+ BB sPINDLE AssEmBLY
Shimano Dura-Ace 7900ROTOR 3D ROTOR 3D+