D E 1 5 . 0 7 . 2 0 1 3

Round Ridge End Plate SmallEnd cover for Round Ridge Small

Powertekk steel accessories are produced withtwo surfaces. Both are made from cold rolled steelprotected with hot dip zink coating on both sides,polyester paint on back side and epoxy primeron front side. Granuled surface is covered withcolored acrylic coating, colored stone granulesand a clear acrylic topcoat. The painted versionhas a powdercoated surface. Color and surfacematch individually to each Powertekk roofcovering.

Granuled surface Painted surfaceClear acrylic topcoat Powder coatingColored stone granules Epoxy primerColored acrylic Galvanization (275 g/

m2)Epoxy primer Cold rolled steelGalvanization (275 g/m2)

Galvanization

Cold rolled steel PolyesterGalvanization  Polyester  End plate is used to close rounde ridges in the endof the ridge. Be sure that round ridge is bent overend plate.

Fix end plate with Powertekk screw in to theridge batten or gable board. Be sure that the endof the round ridge is bent down over the endplate.

 

No special recommendations.

Round Ridge End Plate SmallEnd cover for Round Ridge Small

Powertekk screws. Powertekk Nordic781501  Grey structure781513 Black781524 Red781525 Rustic red781536 Green781542 BrownPowertekk Exclusive751513 Black glossy751514 Anthracite glossy751527 Wine red glossy751537 Green glossy741513 Black matt741514 Anthracite matt741526 Terracotta matt741542 Brown mattPowertekk Tyri781513 Black731543 Cedar brown

Properties Granuled Painted

Diameter ø: 155 mm 155 mm

Steel thickness: 0,45 mm 0,45 mm

Zinc coating: 275 g/m² 275 g/m²

Weight: 0,12 kg 0,10 kg

Consumption: 1 pcs/detail 1 pcs/detail

Workingtemperature:

min 0ºC min 5ºC

Packaging: 2 pcs/box 2 pcs/box