Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
''''BBBBLLLLOOOOCCCCKKKKSSSSAAAAVVVVEEEERRRR''''
TTTTOOOOOOOOLLLL HHHHOOOOLLLLDDDDEEEERRRR SSSSYYYYSSSSTTTTEEEEMMMM
++++
BBBBIIIITTTT PPPPUUUUSSSSHHHHEEEERRRR
Minnovation "Blocksaver" Tool Holder System(Includes Bit Pusher)
We have developed an All Hydraulic ejection system for road milling tooling based on our mining "Blocksaver" system that has been well proven in an underground mining environment andhas been in use for the past 12 years in over 300 installations.
A PCT Patent Application (based on GB Patent Applications 1002949.4 filed 22ndFeb 2010 and 1011427.0 filed 7th July 2010) have been filed for this Product.
This product is also covered by:US Patent Number 6382733GB Patent Number 1064453
Pick Holder 75182
Piston 75140
Block 75181
Plug S51352
Adaptor 75178
Minnovation "Blocksaver" Tool Holder SystemOperating Procedure
1 2 3
By applying low pressure, generally no more than 500 psi is required, the bit can be ejected by actuating a hydraulicpiston housed in the sleeve. The pistoncan be pushed back down the sleeve by opening the hydraulic connection back to tank so no oil is lost.A replacement bit can then be fitted.
If the sleeve needs replacing, then simply apply more pressure of around 4000 psi to fully eject the sleeve.Seized and broken bits will be ejected with the sleeve.
Both the bit & the sleeve can bereadily hydraulically ejected by attaching a hydraulic feed to the block.No other tools are required.
Oil Flow - Low Pressure Oil Flow - High Pressure
ATTACH HYDRAULIC FEED EJECT BIT EJECT SLEEVE
Minnovation "Blocksaver" Tool Holder SystemDetail
3.00[76.2 mm]
1.85
[47.0 mm]
1.90
[48.3 mm]
45°
4.3
0[1
09.2
mm
]
5.6
5[1
43.6
mm
]
Minnovation "Blocksaver" Tool Holder System(Additional Tools)
Oil Returnto Tank
Compressed AirSupply to Pump
Air/HydraulicPower Pack
Pressure GaugeOil Supplyto Block
NO OIL LOSS DURING BIT REPLACEMENT(OIL RETURNED TO TANK)
Bit Ejection 'Broken' Bit Ejection
Hand Tool forRe-settingPiston in Block