Embed Size (px)
DESCRIPTION
SA Roofing is the only publication in South Africa that is dedicated exclusively to the residential, commercial and industrial roofing and re-roofing industries.
Citation preview
NOVEMBER / DECEMBER 2013 ISSUE: 55WWW.TRADEMAX.CO.ZA SA R36 EACH INCL. / R360 PER ANNUM INCL.
1
NOVEMBER / DECEMBER 2013 ISSUE: 55
NOV / DEC 2013
EDITOR’S COMMENTS ...................................................................................................... 2CONTRIBUTORS ................................................................................................................ 4INTERNATIONAL DESIGN ........................................................................................ 6-10COVER STORY ............................................................................................................. 12-14 INDUSTRY INSIGHT ................................................................................................... 16-18INDUSTRY INSIGHT ................................................................................................... 20-21INDUSTRY INSIGHT ................................................................................................... 22-23COMPANY PROFILE ......................................................................................................... 26 COMPANY PROFILE ......................................................................................................... 28PAINTS & COATINGS ................................................................................................ 30-31MAINTENANCE................................................................................................................. 32 WATERPROOFING ........................................................................................................... 34HEALTH & SAFETY ...................................................................................................... 36-39AWARDS ........................................................................................................................ 40-41PAINTS & COATINGS ................................................................................................ 42-44NEWS .................................................................................................................................... 46NEWS .................................................................................................................................... 48
1
6
26
16
282242
12
Trademax Publications
SA Roofing
Tel: 0861 SA ROOF Tel: 0861 727 663 Cell: 082 266 6976Fax: 0866 991 346www.trademax.co.za
Postnet Suite 241
Private Bag X103
N1 City
7463 PUBLISHER: Billy Perrin
0861 727 663
EDITOR: Jennifer Rees
0861 727 663
ADVERTISING: Jacqui Marsh
0861 727 663
LAYOUT & DESIGN: Craig Patterson
SUBSCRIPTIONS & DATA: Luke Perrin
0861 727 663
DISCLAIMERThe views expressed herein are not necessarily those of Trademax Publications. Although we have done our best to ensure the accuracy of our content, neither Trademax Publications nor SA Roofing magazine will be held liable for any views expressed or information disseminated in
this issue.
Fred Wagenaar, Executive Officer of the Institute for Timber Construction (ITC-SA) shares a look back at the industry in 2012, a view on this past year, as well
as a projection on 2014. He remarks, “The economists are predicting a slightly better trading environment in 2014. However, production will, again, be subject to labour demands, and which the ITC-A believes will start a process of mechanization.” Some good news, though, is that, as he adds, “The ITC-SA remains positive that there is now ‘light at the end of the tunnel’ and that the bottoming out of the economy is finally over.” Read more about the ITC-SA perspective on page 20.
Reitze Hylkema, Managing Director of Kare Industrial Suppliers, takes a closer look at the roofing market, and highlights that the present time is one in which the industry goes into “overdrive.” He says, “Projects need to get finished and buildings need to get closed up before the December shut-down. This year seems to be no exception, so we’re all gearing up for a hectic finish.” He adds that “2013 has seen some subtle changes in the market. Despite a very horizontal growth graph in the roofing market, the light gauge steel industry has shown very positive signs of growth, especially in the second half of this year.” Read more about what Hylkema has to say about the state of the industry on page 22.
This industry insight launches SA Roofing’s very first ‘contributors’ page, and an invitation to roofing industry leaders out there with something to say to use this platform to voice your thoughts.
We wish you the best of luck with your busy season, a safe and happy holiday period, and a prosperous year ahead.
Welcome to the Nov/Dec issue of SA Roofing.
Jen
We love hearing from you. Please send your feedback or suggestions to [email protected].
ED
ITO
R’S
CO
MM
EN
TS A look back
For our final issue of 2013, we thought it would be apt to extend an invitation to some important voices in the industry to share
some of their perspectives on the past year.
NOV / DEC 20132
like follow share check
At our Builders truss division we offer the following services:• Free roof truss quotations• Professional advice and friendly service• Supplier of all roof coverings at competitive prices• Member of the ITC (Institute for Timber Construction)• ITC certificate offered with all quotes (Roof inspection A19 certificate)• Precision truss manufacturing• Installation of trusses and coverings• 5-7 day turn-around from order to delivery** (order means that money has been deposited and reflects in the Builders account)
We now have 15 Truss Plants across the country
Bloemfontein
George
Hermanus NOW OPEN
King Williams Town
Marburg
Paarl NOW OPEN
Polokwane Port Elizabeth
Soweto
Upington NOW OPEN Pretoria NOW OPEN
Vredenburg
Rustenburg NOW OPEN Wetton
Witbank NOW OPEN
FOR YOUR NEAREST STORE CALL OUR CALL CENTRE
or visit us at www.builders.co.za0860 BUILDERS/0860 284 533
BTN
A83
Fred is the Executive Officer of the ITC-SA and has been involved in the construction industry for the past 34 years. He is passionate about the built environment and is committed to promoting excellence in design, workmanship and material in the roofing industry. Fred is a proponent of drinking red wine, is unable to resist the calling of the open road, and loves chasing the sunset on his Harley.
Lyndsay entered the construction industry in 1989 and has many years’ experience in both the civil and commercial spheres of this industry. He is well versed in residential construction and especially roofing, as many of the roof structures on his +300 projects were erected by his own company. Holding a BSc (QS) degree, a Diploma in Project Management, Lyndsay is the current chairman and serves on the board of the ITC-SA.
Reitze has been the Managing Director of Kare Industrial Suppliers for the past 20 years and has been involved in the marketing of fastening systems for over 30 years. He is actively involved with the Corrosion Institute of Southern Africa and the Southern African Light Steel Frame Building Association and is also a participating member of various technical committees at the SABS relating to roofing, fasteners and corrosion. He feels strongly about “fit-for-use” quality in all construction materials, especially in roofing, and for him, educating the market is imperative. His hobbies include scuba diving and CrossFit training.
Neels is the Master Builders Association KZN's Health and Safety Manager and has served the Association in this position for more than 15 years. He started his working career with ESKOM in 1981 where he qualified as a Draughtsman. In 1986 he changed his focus to Safety Risk Management and later qualified as an Occupational Health and Safety Risk Management Officer. He holds a National Diploma in Safety Management and has been practicing Occupational Health and Safety for the past 27 years. He is a founder member of the South African Institute of Occupational Safety and Health (Saiosh) and is a Chartered Member of the Institution of Occupational Safety and Health in the UK. He currently serves on the Minister of Labour's Advisory Council for Occupational Health and Safety (ACOHS). When it comes to Construction Health in Safety in South Africa Neels is widely regarded as the industry's leading expert.
CO
NT
RIB
UT
OR
S
FRED WAGENAAR
LYNDSAY COTTON
REITZE HYLKEMA
NEELS NORTJE
NOV / DEC 20134
Contributors
aesthetically pleasing
reduces energy usage in a building
superior long term R-value
the right choice for intelligent organs
moisture and wind resistant
thermoset, does not melt, drip or spread flame
environmentally friendly & recyclable
high compressive strength
CAPE TOWN: Tel: +27 (0)21 981 8814 • Fax: +27 (0)21 981 6322 • E-mail: [email protected] • Units B18/19 Kruis Road, Brackenrite Business Park, Brackenfell.PORT ELIZABETH: Tel: +27 (0)41 453 0277 • Fax: 086 532 5702 • E-mail: [email protected] • 4 Bedford Road, Neave Industrial.
KWA-ZULU NATAL: Tel: +27 (0)31 700 5250 • Fax: +27 (0)31 700 4924 • E-mail: [email protected] • Unit G Pine Mead Industrial Park, 47 Gillitts Road, Westmead.JOHANNESBURG: Tel: +27 (0)11 421 0313 • Fax: +27 (0)11 421 0410 • E-mail: [email protected] • 3 Detroit Street, Apex, Benoni.
H O M E • B U I L D I N G • R E F R I G E R A T I O N • I N D U S T R I A L
www.rigifoam.co.za
TM
5742 - LAMBDABOARD_210x297mm.indd 1 2013/07/11 9:44 AM
INT
ER
NA
TIO
NA
L D
ES
IGN
Riding ‘The Wave’ Global stand design for ToyotaDynamic, energetic and pure, like a wave in motion, the design of the new global stand for Toyota is an illustration of the Japanese principle of Seijaku, the 'active calm' or serenity in the midst of activity.
Riding ‘The Wave’ Global stand design for Toyota
INT
ER
NA
TIO
NA
L D
ES
IGN
The architecture looks minimalistic and calm from the outside, but radiates a
tremendous force. The inside of The Wave unfolds into an impressive visual experience: everything is in constant motion, connected and active.
The new stand architecture marks a new era for Toyota, as it is intended to be used on all motor shows worldwide, with slight variations according to the respective conditions on site.
This was a tricky challenge for the designers who were briefed to create a modular system that could work on totally different motor shows without compromising on the consistency of the idea.
Inspired by traditional Japanese paper craft, the idea of The Wave was born by just rolling a sheet of paper. This resulted in a vibrant, dynamic shape with a fascinating clarity that portrays the asymmetrical balance we find in nature and at the heart of Japanese aesthetics.
INT
ER
NA
TIO
NA
L D
ES
IGN
NOV / DEC 20138
INT
ER
NA
TIO
NA
L D
ES
IGN
ABOUT DÉRI DESIGN
Déri is a design agency for spatial design, brand staging and immersive environments, based in Frankfurt, Germany, and founded in 2004.
With its multinational team of designers, architects, directors, artists, and producers, the agency has realized numerous interdisciplinary projects throughout Europe, the Middle East, and Asia.
Déri's holistic approach, which involves the concept, design, and communication, creates cross-medial environments that guide the visitors on an exciting journey through state-of-the-art design and technology: from large, impressive staging to small, playful design details and a tangible experience of the product itself.
PROJECT DETAILS:
DESIGNERS: János Déri, Alia RamadanREALIZATION: b+s exhibitionsPHOTOGRAPHER NAME: H.G. EschLOCATION: GenevaAREA: ca 2 200m²COMPLETION YEAR: 2013
NOV / DEC 201310
TEL: +27 (0)12 250 3103/4 • FAX: +27 (0)12 250 3190 • EMAIL: [email protected]
Corner of Marthinus Ras and Van tonder Street, Brits Industrial • P.O. Box 2162, Brits 0250
WE SPECIALISE IN:
• IBR
• Widespan
• Corrugated Iron
• Lipped Channels
• Flashings• SS Tile
•• Roofkits
TEL: (012) 250 3103/4WEB: www.ssprofiling.co.za
• SS Tile is used in up-market developments as well as low cost housing.
•• Unlike most other pressed steel tiles, no extra skilled labour is necassary since the tile sheet is installed in the same manner as normal IBR or Widespan roof sheeting.sheeting.
RECENT MITEK PROJECTS, COMPLETED OR IN PROGRESS:
BOARDWALK CASINO HOTEL:
This very large gang-nail timber roof truss structure of over 6 500m² with spans of 20m, pitch of 45°, as well as many dormers and turret roofs, was supplied by BUCO Uitenhage.
CO
VE
R S
TO
RY
MiTek® roof structures – the facts:
MiTek® as the leading Roof Truss System supplier in South Africa, with a network of over 190 licensed roof truss manufacturers across
Southern Africa, is continually involved with large and interesting projects, whether they be of the Gang-Nail® plated timber truss type or
utilizing the Ultra-Span® LGS technology.
NOV / DEC 201312
creating the advantageWorld Leaders since 1956.
A network of more than 190 licensed roof truss manufacturers across South Africa, provides a competitive and economic solution to even the most complex of roofi ng problems. This MiTek fabricator network, using MiTek’s state-of-the-art software programs, provides high quality, purpose-engineered truss units to satisfy the need of an ever increasing complex roof market. The scope of MiTek’s services includes not only unrivalled expertise in terms of professional structural engineering service but also the extensive Research and Development into all aspects of timber and light gauge steel roof design and construction as well as a full range of manufacturing equipment - that makes MiTek a World Leader.
Prefabricated timber roof trusses
eCo Fasteners® are timber and steel fastening devices that provide strong and rigid connections to any building structure.
• Light Gauge Steel Trusses • Steel Wall Framing
LEADING ROOF TRUSS SYSTEM SUPPLIER IN SA AND THE WORLD
A network of more than 190 licensed roof truss manufacturers across
that provide strong and rigid
MiTek Park,754 16th Road, Randjespark, Ext. 34, Halfway House,1685. Midrand (Head Offi ce) Tel: + 27(0) 11 237 8700Cape Town Tel: 021 905 0244 • Durban Tel: 031 700 6332 • Port Elizabeth Tel: 041 581 7525email: [email protected] • www.mii.com/southafrica
*MiTek Industries South Africa (Pty)Ltd, a division of the worldwide MiTek Group.
THE LAKES CONFERENCE CENTRE:
This interesting asymmetric Ultra-Span roof structure, with its large cantilevers and clear span of 27m, was supplied by MARCO erectors.
MEDICLINIC KIMBERLEY:
These very large shallow pitched Ultra-Span roof structures with a total area of over 10 000m² and clear spans of 25m are being supplied by CENTRAL Roof Industries.
Similar other Mediclinic projects are being supplied with Ultra-Span roof structures throughout the country.
KWAMAPHUMULO LIBRARY:
This large curved Ultra-Span roof structure of some 1 200m² with 20m clear span sections, was supplied by BUCO Pinetown.
MiTek Industries South Africa (Pty) Ltd
(t) +27-11 237 8700(e) [email protected](w) www.mitek.co.za
CO
VE
R S
TO
RY
NOV / DEC 201314
YOUR ROOFING FASTENER SPECIALIST
WE SET THE STANDARD (SANS1273 – 2009 AS3566.2 – 2002)
Cape Town(021) 592 4577
S.A. DISTRIBUTOR: KARE INDUSTRIAL SUPPLIERS
Port Elizabeth(041) 451 1447
Pretoria(012) 332 4073
Durban(031) 705 5610
Johannesburg(011) 334 0922
Choosing a roofing designer, fabricator and erector may seem as simple as picking up a phone, asking for a few quotes and, in true South African fashion, the buyer
will accept the cheapest quote and a whole host of promises at face value.
The specifier or end user should ask a number of pertinent questions when requesting a design and fabrication of a monoplaner prefabricated roof system. Although to a lesser degree for residential roofs, the following is especially relevant for any ‘public building’, class of occupancy other than H3 or H4, as defined in SANS 10400-A of the National Building Regulations.
• Does the fabricator hold a current Certificate of Competence as issued by the Institute for Timber Construction (ITC-SA) in the appropriate category? There are presently four categories and only fabricators in category A (high risk) may fabricate roof structures for public buildings, laminated timber structures, spans larger than 10m, scissor trusses > 5m, attics, dormers, piggyback trusses, complex industrial and commercial buildings and complex hip systems.
IND
US
TR
Y I
NS
IGH
T
Caveat lector – let the reader beware
All too often we are presented with the legal term ‘caveat emptor’ – let the buyer beware – but this is more than often too late and the wrong
choice has already been made.By Lyndsay Cotton, General Manager of LCP Roofing and Chairman of the ITC-SA.
NOV / DEC 201316
• Does the erector hold a category A certificate as issued by the ITC-SA if erecting the abovementioned class of buildings? He must be able to produce his certificate of competence.
• Can the fabricator prove that his system (software supplier) has verified and checked his design if it falls into category A?
• Can the fabricator prove, through an approved quality system, i.e. SANS1900, that he has verified the dimensional accuracy of his incoming timber? It is the writer’s experience that more and more timber in South Africa does not conform and the potential of failure cannot be excluded. The fabricator will not be able to hide behind product liability insurance if he cannot prove that he has used material that conforms to standards.
• Does the fabricator belong to and only purchase nail plates through one of the accredited system suppliers in South Africa, i.e. Alpine Systems, Multinail, MiTek Industries or International Truss Systems and as tested and approved by the CSIR? There are other vendors of ‘pirate’ nail plates who have entered the market in South Africa and their fit-for-purpose applications have yet to be conclusively proved through an accredited and pre-defined testing process as recommended by Timber Engineering Advisory Committee of the ITC-SA and the CSIR. They are able to produce ‘so-called’ SABS test certificates, but these are not in accordance with the procedures as laid down by the ITC-SA.
• Can the fabricator prove that his bracing design and the application is strictly in accordance with Volume 2 as published by the ITC-SA?
• Can the fabricator prove that all timber used is structurally graded? The use of non-structural timber or XXX (‘black cross’) timber is specifically prohibited.
• Can the fabricator prove that he has used the correct loading for the roof cover envisaged? Generic, ‘one fits all’ loadings on quote templates are not acceptable.
• Do quotations and site documentation comply strictly in accordance with the requirements of the ITC-SA?
• Does the fabricator subscribe to an externally audited quality system such as SANS1900 and is he audited by either SATAS or the SABS?
IND
US
TR
Y IN
SIG
HT
NOV / DEC 2013 17
IND
US
TR
Y I
NS
IGH
T
• Are trusses stored, handled and transported in accordance with SANS 10243? Large and complex timber roof structures should only be transported in a manner so as not to damage or weaken the joints. Any reputable fabricator will transport his product on fit-for-purpose and specially designed truss trailer.
Does the accredited inspector or engineer inspecting the roof have a complete erection drawing at hand and can he verify through this that the timber structure has been erected according to the design intent? Needless to say, even if it is a registered engineer, is he fully with au fait with the erectors and bracing manual and is he accredited with or an engineer member of the ITC-SA?
FAILURE TO BE ABLE TO ANSWER POSITIVELY TO ALL OF THE QUESTIONS ABOVE COULD LEAD TO THE FOLLOWING:
• Failure of the roof structure, which could lead to serious injury or death, which could result in the building owner being held liable to negligent and criminal charges.
• Sagging roofs, eaves or gables which will detract from the aesthetics of the building.
• Non issue of an occupation certificate as the building inspectorate nationally is being educated and briefed on these aspects.
• Possible repudiation of any form of insurance claims regarding roof structures as any competent insurer will, when investigating any claim, confirm if all industry related requirements and norms are being complied with.
NOV / DEC 201318
Leaders in roof truss technology
• Is an "A" graded Fabricator and Erector• Is a SANS 1900 (SATAS) Quality approved truss plant• Has two state-of-the-art Computer Numerically Controlled Saws• Uses imported Tri-Press technology in its plant• Has been awarded a 100% pass mark as a result of its 2013 ITC-SA annual audit• Is able to plan and design for additional loads imposed by solar panels and geysers•• Can accommodate both "in roof" and "on roof" solar geyser installations• Our designers are not only able to design; they have erected roofs as well. They are intimately aware of every aspect of roof design and construction.• We transport our trusses in a professional manner
LCP Roofing
082 441 5026/ 0861 LCPROOF
www.lcproofing.co.za
PAST (2012):
IN 2012, ECONOMISTS PREDICTED THE FOLLOWING:
• The South African economy was forecast to grow by only 2.8% in 2012, and not 3% as was originally expected.
• The forecast was for a lower growth than was originally expected for 2012 when compared to 2011, and was largely the result of a slower pace of expansion projected for the world economy.
• The forecast was that trends in domestic inflation and interest rates would also impact the economy during 2012.
• Lastly, the forecast was for a weaker rand exchange rate in 2012 compared to 2011.
These predictions became statistical truths, and we saw a number of businesses suffer the consequences of a slow- growing economy, and in some areas not growing at all. At the ITC-SA we saw the impact of a stuttering economy by the moth-balling or closure of fabrication plants, with the consequential job losses that always run parallel with business closures. Inspectors and Engineers diversified their businesses to ensure a sustainable income. Some moved on to other income-generating activities and were lost to the industry at large.
PRESENT (2013):
The ITC-SA business environment did not change much in 2013. The ITC-SA membership growth expectations were tempered by the union actions at the mines and elsewhere, causing national revenue loss which will never be re-cooped. The demand for salary increases above market growth in all sectors of the economy have a further negative impact on all markets and, in an environment where production is stagnant, causing cost-cutting measures being applied to remain viable. The first and easy way to cut costs is by reducing overhead costs, and which invariably implies further job losses. A review of current and expected economic predictions by Standard Bank revealed the following:
• In the July MPC meeting, the Reserve Bank kept the repo rate unchanged at 5% – this even though CPI is expected to breach the 6% upper limit of the target band in Q3/2013, and there is still much uncertainty around the exchange rate pass-through. Standard Bank also revised and decreased South Africa’s growth rate, and increased its inflation forecasts, stressing the stagflation bind.
• According to the economists of Standard Bank, the weaker Rand remains the primary risk to inflation. After May’s CPI had surprised to the downside at 5.6%, the consensus for July CPI was 5.8%. Also, headline CPI unexpectedly decelerated in May, driven lower by subdued food prices which fell 0.1% month-on-month.
Again Standard Bank economists stated that they expect the current market conditions to lift the year-on-year rate of food price inflation (currently weighted at 15.4% in the CPI basket). Petrol prices, which account for 5.7% of the CPI basket remains a concern.
• After the surprise of the downside in May, Standard Bank economists also anticipate an uptick in headline PPI growth in June 2013 to 5.1% year on year from 4.9% year on year (June 2012). Key contributions to the annual increase in headline PPI have consistently stemmed from food products, beverages and tobacco products (adding 2% points on average in 2013 thus far) as well as coke, petroleum, chemical, rubber and plastic products (adding 1.2% points on average in 2013 thus far).
• Despite mildly positive job growth in Q1/2013, South Africa saw the official unemployment rate revert to above 25%, which at 25.2% as labour force growth outpaced employment growth. The unemployment rate, even when improving, has not deviated materially from the 25% mark for five consecutive quarters, and this trend is expected to continue in Q2/2013.
Fred Wagenaar, Executive Officer, Institute for Timber Construction.
IND
US
TR
Y I
NS
IGH
T Past, Present and Future: An ITC-SA perspective
People proclaim yesterday as history, and that nothing can be done to undo what happened. Today is about making tomorrow’s history, but with the
proviso that we can still guide the outcome.
NOV / DEC 201320
FUTURE (2014):
The economists are predicting a slightly better trading environment in 2014. However, production will, again, be subject to labour demands, and which the ITC-SA believes will start a process of mechanization. Employers are tired and have lost their willingness to negotiate where unreasonable demands are tabled by the unions. So, in short, the ITC-SA remains positive that there is now ‘light at the end of the tunnel’ and that the bottoming out of the economy is finally over. We expect to see limited growth and expansion due to the long economic lag that we have experienced over the last couple of years. We also expect to see very limited job creation, and a new move towards mechanization.
The economic realities below provide for a fair assessment of real market and trading conditions in the construction environment, and which the ITC-SA believes will still be prevalent in 2014.
• A fair percentage of consumers will still be battling with impaired credit records, adversely affecting their access to credit, with this situation being reflected in continued low growth in household credit extension.
• Real year-on-year house price deflation will accelerate marginally in the first and second quarters of 2014 on the back of rising inflation during this period.
• Many households’ ability to take advantage of the improved housing affordability and low interest rates, continued to be hampered by a high debt-to-income ratio.
• The lack of planning and provision of the necessary infrastructure will remain a serious stumbling stone and something which cannot be undone in the term.
FRED WAGENAARExecutive OfficerInstitute for Timber Construction
Poly-isobutyl rubber seal that remains permanently flexible and vulcanizes onto the roof sheet and screw, effectively preventing any leakage.
LEAK KING roof fasteners are for all types of roof sheeting. IBR, Currugated, Fiberglass, Polyethylene and many more. Installed on new and existing roofs.
For further information, we can be found on Specifile & Klassidex
Tel: 014 717 2122Fax: 086 658 5182E-mail: [email protected]: www.leakking.co.za
Factory address: 703 Oktaan Street, Industrial Area, Modimolle, 0510, South Africa, PO Box 3099, Nylstroom, 0510, RSA
No metal contact between screw and sheeting, polyprop cone acts as isolator and absorbs contraction and expansion.
Unique underpinning that supports the roof sheet from underneath, adding rigidity to the overall roof structure.
CSIR TESTED AND APPROVEDWATERTIGHT PEACE OF MIND
NOV / DEC 2013 21
As the saying goes, “The more things change the more they stay the same.” To some degree this holds true for the roofing and cladding industry, where the typical
yearly pattern is as follows:
After a slow start in mid-January the gears barely get turning before the Easter holidays arrive. During May things pick up a bit but then winter arrives and, especially in the Western Cape, adverse weather conditions can play havoc with the erection of roofing and cladding, resulting in many a lost day. In inland areas the industry usually ticks along merrily during winter with the odd long weekend, holiday and strike causing interruptions.
It is during October/November that the roofing market goes into overdrive. Projects need to get finished and buildings need to get closed up before the December shut-down. This year seems to be no exception, so we’re all gearing up for a hectic finish.
2013 has seen some subtle changes in the market. Despite a very horizontal growth graph in the roofing market, the light gauge steel industry has shown very positive signs of growth, especially in the second half of this year.
Not only has light gauge steel made inroads in the truss market, but also into the residential and commercial construction markets. This has been accompanied by new and innovative cladding systems that are very energy efficient and fast to erect.
These cladding systems are made up of combinations of any number of the following: fibre cement boards or planks, magnesium oxide boards, gypsum boards, oriented strand boards (OSB), membranes, expanded polystyrene, various types of plaster, mesh and the like.
From a fastening point of view, the use of these construction materials has required a change in the old type of fasteners and the development of new ones, in order to give the required pull-out values in thin gauge steel.
Another change in the roofing market has been the continued move from Class 2 electroplated screws to Class 3 coated screws. Most of the leading roll formers and sheeting suppliers now recommend and specify the use of Class 3 coated fasteners with their roofing material – a very positive and welcome move.
IND
US
TR
Y I
NS
IGH
T
2013 - In the rear-view mirror
As the end of the year approaches it is time to do the Mike and the Mechanics ritual and do some “Looking back over my shoulder.”
By Reitze Hylkema, Managing Director, Kare Industrial Suppliers
NOV / DEC 201322
As a result of this change, the demand for Class 3 fasteners has increased, which in turn has resulted in an increase in the number of brands/types of coated screws available in the South African market. Unfortunately most of the products on offer as Class 3 fasteners do not comply with the SANS 1273 – 2009 requirements and some of the performance claims made by companies regarding the corrosion resistance of their fasteners is nothing short of ridiculous. It is very unfortunate that there is currently no official independent body that tests and monitors the quality of fasteners that are offered to the roofing and cladding industry, as it leaves the industry vulnerable to inferior products that can result in fastener failure and premature corrosion.
The Energy Act has also had its effect on the roofing market, as thicker and different types of insulation are now being specified in order to achieve the prescribed R-values. This has resulted in the use of longer fasteners and under roof support structures that allow space for the insulation. The thick insulation has had a major impact, especially on the concealed fix roofing systems – complicating the fixing of the clips or increasing costs by adding a support structure.
A very interesting development this year has been the formation of the Southern African Metal Cladding and Roofing Association (SAMCRA) which, as a subsidiary of the Southern African Institute of Steel Construction (SAISC), will become a representative body for the roofing industry. The membership will be made up of coil producers, roofing profilers, roofing contractors, allied product suppliers, specifying professionals and financial institutions.
The aims of the association will be to promote the image and use of metal roofing and cladding, as well as training, testing and setting of standards for roofing and cladding. The success of this association will be of tremendous benefit not only to the roofing industry, but to the building industry as a whole, and the public at large.
The headaches surrounding the construction of the new power stations have been making headline news the whole year, so not much has to be added to this except to express hope that the situation will improve in 2014.
So as 2013 draws to a close we look forward to the new challenges that lie ahead in 2014 and are confident that the positive changes in the roofing and cladding industry in South Africa will result in a more professional industry in the long term.
Curasure offers Independent, Third Party Building Maintenance Solutions for Bodies Corporate, Managing Agents, and the Corporate Industry
WE SPECIALISE IN:
OUR SERVICES INCLUDE:
“IS YOUR MAINTENANCE PROJECT A QUALITY ASSURED PROJECT?”
The advantages of having a quality assurance company or Building Envelope Professional employed is almost immeasurable and will give Bodies Corporate and Building owners peace of mind when it comes to redecoration projects and maintenance requirements.
Identifying Maintenance Requirements Technical Assessments Report for Buildings Developing and Specifying of Solutions Quality Assurance during Maintenance Projects On-going & Preventative Maintenance Systems and Strategies
Building Audit Reports (Detailed technical assessment report with recommendations, maintenance plans & technical specifications)
Tender Process (Facilitating of a Third Party Tender process by compiling the complete tender pack with scope of work and specifications. We also provide a full tender evaluation on completion)
Quality Assurance (On-site Third Party Quality Assurance & Certification for Maintenance Projects)
On-going and Long-Term Maintenance Management (Sinking fund reports with 5-10 year maintenance forecasts and systems)
Turnkey Maintenance Systems (Short-, Medium- and Long-Term Maintenance Management of Building Structures)
Training (On-site or applicator specific to specs, per project)
Preventative maintenance requires a paradigm shift
Copyright © Curasure 2013
[email protected] // 011 – 675 2595
TM
NOV / DEC 2013
YOU CAN TWIST AND TURN BUT YOU WON’T BLOW OUR ROOFS DOWN !KLIP-TITE 700 - ONLY FROM GRS
Developed through continuous in-house testing of existing products, where it was realised that failure is normally caused by the sheet unclipping from the fixing clip, during high wind uplift pressure.
• Transverse stiffeners introduced to the clip in order to achieve a balanced system design and even higher wind uplift resistance• The deflection of the pan is reduced, increasing the wind uplift resistance of the sheet.• Transverse stiffeners are a first in the South African sheeting market• Offers improved wind uplift resistance results compared to our existing Klip- Lok 700 product• The ultimate wind uplift resistance of Klip-Tite is 1.8kPa compared to 1.6kPa for KL700
Talk to us, The Smart Roof People on 011 898 2900 or visit www.global-roofs.co.za or email [email protected]
BrownBuilt | HH Robertson
GRSGLOBAL ROOFING SOLUTIONS
GRS Klip-Tite
GRS Wolfie Ads -2(DPS).indd 1 2013/08/21 5:31 PM
YOU CAN TWIST AND TURN BUT YOU WON’T BLOW OUR ROOFS DOWN !KLIP-TITE 700 - ONLY FROM GRS
Developed through continuous in-house testing of existing products, where it was realised that failure is normally caused by the sheet unclipping from the fixing clip, during high wind uplift pressure.
• Transverse stiffeners introduced to the clip in order to achieve a balanced system design and even higher wind uplift resistance• The deflection of the pan is reduced, increasing the wind uplift resistance of the sheet.• Transverse stiffeners are a first in the South African sheeting market• Offers improved wind uplift resistance results compared to our existing Klip- Lok 700 product• The ultimate wind uplift resistance of Klip-Tite is 1.8kPa compared to 1.6kPa for KL700
Talk to us, The Smart Roof People on 011 898 2900 or visit www.global-roofs.co.za or email [email protected]
BrownBuilt | HH Robertson
GRSGLOBAL ROOFING SOLUTIONS
GRS Klip-Tite
GRS Wolfie Ads -2(DPS).indd 1 2013/08/21 5:31 PM
When choosing a roof covering, certain elements should be considered. The roof pitch,
architectural appearance, economy, insulation properties and atmospheric and chemical influences are all considerations.
The main aspects of a roof are to rainproof (not waterproof) a structure, stand up to any type of weather conditions, such as storms and gales without showing great signs of change, to be light in weight and provide some degree of protection against fire.
We have designed, patented and installed a number of roofing products and accessories, such as Alpklip, Stormkap, Peter de Luxe, and, of course, our ever-popular Peterlo. Minor but important attention to the details of hips, ridges, valleys, verges, abutments and flashings to chimneys have been perfected over the years.
The first Peterlo roof – patented by Peter Plum was installed in 1960 in Claremont and is still intact. The new Peterlo Stormkap patent incorporates the proven Peterlo system, as well as the innovative Stormkap system to treble the life span of a roof.
For all your roofing requirements from wallplate up, contact us.
We are the sole agents for Fakro double-glazed roof windows and quality loft ladders. We supply and fix, as well as supply only.
Visit our website www.hpplum.co.za for lots of interesting information.
CO
MP
AN
Y P
RO
FIL
E Roofing on top“We create roofs” ®
Established 1956Your home is your castle and if you want your house to really stand out
from the rest, we are the roofing specialists to contact. We have been in the roofing business since 1956 and realize how important it is to have a
good looking home that is also weatherproof and long-lasting.
NOV / DEC 201326
2013 proved to be a record year for sales and production output for the Durban-based company, with their footprint extending into the Eastern Cape, Northern
Cape, and Mpumalanga and into sub-Saharan Africa. The product range caters for all roofing styles, including girder beams to carry profiled steel sheeting, trusses that can accommodate concrete roof tiles, pressed steel tiles or any of the profiled steel roof sheets.
Supply of kit form bulk roofing has been welcomed by many contractors with larger sites and high monthly demands. Dezzo Roofing’s unique and comprehensive on-site quality management program, coupled with skilled personnel, ensures that the client’s demands are met without compromising design and quality standards.
Dezzo Roofing utilizes zinc and aluminum coated steel for all of its components to ensure the best possible performance of its roofing structures. The company is also a member of the South African Light Steel Frame Building Association (SASFA).
With a production capacity of 500 tons per month, Dezzo Roofing is well-equipped to provide roofing material for at least 100 000m² of roofing per month.
Dezzo Roofing’s reputation of delivering quality roofs on time, and at a competitive price, has earned the company preferred supplier status with all of their existing clients.
Dezzo Roofing heeded their KZN clients’ call to provide the same impeccable service and quality for their timber roof requirements by recently commissioning a timber roof truss plant licensed by Alpine Automation South Africa in Durban. The company also holds a membership with the Institute for Timber Construction.
CO
MP
AN
Y P
RO
FIL
E Dezzo Roofing – a look back on 2013
Dezzo Roofing has been involved in a number of successful projects nationwide, ranging from residential houses, rural schools, social facilities, and hotels.
NOV / DEC 201328
Price means nothing without quality and service.
Dezzo Roofing specialises in manufacturing and supplying a lightweight steel roof support system, specifically designed to carry all roof coverings including concrete roof tiles, steel sheeting and fibre cement sheeting. Almost any roof design can be accommodated and each roof is custom engineered and designed.
LightweightSTEEL ROOF
support systems
SA’s LEADERin lightweight steel trusses.
Dezzo Roofing • Tel: 031 713 6571 • Fax: 031 705 6822 • www.dezzo.co.za
Hanover housing projectKwaZulu-Natal
Kokstad housing projectKwaZulu-Natal
Kingsburgh housing projectKwaZulu-Natal
Welgemeen Boerdery is a fruit and vegetable farm on which a number of hut type structures stand, which house
its farm workers. Gradual deterioration, as well as damage caused during recent farmworker strikes, had resulted in serious leakages in 13 of these houses. After careful consideration, Sika’s David van der Ross recommended that Sika’s Sealoflex Professional would be the ideal product for the project, since it not only provides waterproofing, but a fibre-reinforced membrane as well.
Sealoflex Professional, a single component, acrylic-based, flexible, waterproofing compound, contains special fibre reinforcement that eliminates the application of a separate reinforcing membrane.
PA
INT
S &
CO
AT
ING
S Farmhouse roofs and walls sealed by Sika
The owner of DS Construction, Dirk Steyn, recently contacted Sika when he needed advice on waterproofing farmhouses in Ceres, the gateway to the Cedarburg area in the heart of the Cape winelands.
Ceres - Hut completed.
Ceres - Hut Before.
NOV / DEC 201330
Since no special cleaners are required prior to application of Sealoflex Professional, the roofs and walls of the huts were hosed with high-pressure cleaners after removal of the existing membranes and paint layers had taken place.
This highly durable Sika product provides good adhesion to most common, sound roofing substrates, on flat or tiled roofs, and may be applied onto any existing roof waterproofing system.
DS Construction coated a total surface area of approximately 1300m² with Sealoflex Professional; 292 x 5 litre tins Terracotta colour for the hut roofs and 234 x 5 litre tins Charcoal colour for the walls. The project commenced in May 2013 and due to the advantages of applying ready-to-use Sealoflex Professional, it was completed the following month.
The owner of Welgemeen Boerdery can rest assured that his revamped hut-houses will stand the test of time.
For more information on Sika products and systems, visit zaf.sika.com.
PA
INT
S &
CO
AT
ING
S
Ceres - Damages caused.
The costs of maintaining a property these days can be taxing on any building owner.
In the maintenance industry, the decorative and aesthetic value of maintenance can no longer be considered as the only value. The role of preventative and protective maintenance is becoming a vital part in protecting the building envelope against deterioration, ensuring long-term protection of the asset value. As the world around us changes and expands, it has become increasingly difficult to keep up with the pace of globalization, technology and an increased focus on legislation. It is very easy to get trapped in our daily routines and lose track of the importance of preventative maintenance.
During its lifetime, a building will be revamped, altered and painted many times. Building owners should take note that choices on maintenance strategies will greatly affect the total cost of maintaining a building over its lifespan. It is therefore crucial that the entire building envelope be maintained and protected. This not only includes painting, but also roof maintenance, waterproofing, plaster, concrete, joints and various special building components that could affect the life expectancy of the building envelope.
Building owners should guard against falling into the trap of short-term thinking when it comes to maintenance. Consider the following graph that highlights the fact that preventative maintenance is far cheaper in the long run:
One of the major obstacles for the industry as a whole is insufficient core competency levels and the lack of planning by building owners. In South Africa, we are currently experiencing a major shortage of skills, and the construction industry is one of the most seriously affected areas. Collaboration with industry specialists is more important than ever before, and will become one of the major drivers for future growth and management in our industry.
Looking forward to 2014 and beyond we believe that measured and preventative maintenance will be more crucial than ever before. In the words of Henry Ford, “You can’t build a reputation on what you are going to do.” The future of preventative maintenance will be shaped by not only building owners, but the industry as a whole.
MA
INT
EN
AN
CE “Preventative maintenance
requires a paradigm shift”With the global economic pinch experienced during 2013, we have noticed a significant shift by property owners towards measured
maintenance planning and expenditure.By Frederik Nel, Curasure Building Maintenance Solutions
NOV / DEC 201332
TIPS FOR PROTECTING YOUR ROOF BEFORE THE WET SEASON BEGINS:
• Clear your roof of debris and anything that could accumulate and hold water. These are a recipe for a leaking roof. Make sure that dead branches have been cleared from around your house. This will reduce the risk that they will fall during a storm and damage your home.
• If you did not construct your roof with Butyl Seal lapseal between the sheeting, you can still protect your roof by sealing your laps with a wider size tape, thus ensuring a watertight seal.
• Check for structural issues, such as loose fasteners and lifting roof sheets. Ensure there is no sagging of the roofing sheets. A harsh storm could make these issues worse.
• A leaking fastener can easily be sorted out by cutting a square shaped piece of butyl tape and placing it over the fastener for a perfect seal. A sealed fastener will prevent a trickle of water running down into your wooden truss and causing rot. Butyl tape has excellent anti-vibration properties and will prevent the fastener from working its way out.
• Although a leaking gutter may not cause the roof to leak directly, a lack of control over your water flow may result in unexpected issues, such as a build-up of hail, or water flow that can’t be fully accommodated by gutters in the first place. Some gutters provide owners with a storable water source, and water loss prevention is essential.
• Weatherproof when you can. If there is a dry period, take advantage of the clear skies to weatherproof your home now, while you have the chance. If you wait, you could end up with mould, leaks, or complete structural breakdowns in your roof. Butyl tape is the perfect product to weatherproof your IBR and corrugated sheets.
• Limit walking on your roof for maintenance, repairs and cleaning gutters. Walking on your roof often will wear out the roofing material, reducing the years of overall protection. Butyl tape can lessen the impact when walking on a roof.
• If water marks or bulges in your ceiling form during a storm and you can’t find a reputable roofer to help you out in a hurry, don’t be afraid to poke a hole in the ceiling with a pencil or a Phillips-head screwdriver to let the water drip into a bucket. Repairing that hole will be a lot easier than replacing your ceiling and cleaning up the floor if the water bursts through.
For home owners who are concerned about aesthetics, Butyl tape is fully paintable with most painting methods. Butyl tape comes in many widths, thicknesses and lengths. The uses of this product are only limited by the imagination.
No preparation is needed for painting over the Butyl tape. Simply apply paint, either by brush or spray, then wait for the paint to dry. Butyl tape will adhere to most factory painted roof sheets, as long as the sheets are not compromised in any way.
Always make sure that the surface area is clean.
FOR MORE INFORMATION, CONTACT:
(t) 011 462 1840 (e) [email protected] (w) www.butylseal.co.za
WA
TE
RP
RO
OF
ING Butyl roofing tape and
summertime sealingThe rainy season is coming, and now is the time to protect your home or
business against leaking roofs, gutters, skylights and flashings. The best time for this is while everything is dry – you may not get the chance once the rains come.
NOV / DEC 201334
In fact, it is a legal requirement to provide a workplace that has sufficient toilets, showers, change rooms and eating areas that are clean
and hygienic. The work environment must also have adequate lighting and ventilation and workers must be protected from excessive noise and heat.
LIGHTINGAdequate lighting must be provided in dark areas such as stairwells and basements. In plant and storage yards, a survey should be conducted to determine if the light that is provided complies with the minimum requirements of the Occupational Health and Safety Act.
VENTILATIONMake sure the areas in which people are working are suitably ventilated. Extraction and exhaustion systems must be installed in areas that are not suitably ventilated. Common hazardous areas that require these systems would include where chemicals and adhesives are used, where welding is taking place, or where a petrol or diesel motor is running in a confined space or basement. The plant yard’s spray and sandblasting booth should be subjected to a survey to determine if the ventilation is adequate.
HE
ALT
H &
SA
FE
TY Workplace, Environment,
Health and HygieneJust because it is a construction site it does not mean that
workplace facilities cannot be clean and hygienic.
NOV / DEC 201336
Advertise on one, two or all three of these highly visible and useful Year Planners at the low rate of R7500 + VAT per spot.
Each year-end copy of SA Roofing, SA Affordable Housing and Timber iQ will be mailed with two branded Year Planners included – ensuring you reach your relevant audience well ahead of the Holidays and the New Year!
Call: 0861 727 663E-mail: [email protected]
BRANDING FOR A YEAR!
LIMITED SPACE AVAILABLE ON A FIRST-COME FIRST-SERVED BASIS
CONTACT
Trademax Publications’ popular Year Planners offer 19 advertisers on each planner a valuable, long-term branding opportunity to appear on an A1 (year-at-a-glance) Year Planner for 2014.
HE
ALT
H &
SA
FE
TY NOISE
Loud noise over long periods of time can lead to permanent hearing loss; therefore it is extremely important that all reasonable steps are taken to reduce noise levels at the source. Areas where noise levels exceed 85dB must be suitably identified with signage requiring persons to wear appropriate hearing protection. Workers must adhere to these warning signs at all times to avoid any chance of permanent hearing loss. It is recommended that noise surveys are conducted for the plant yard to determine the level of sound to which workers are exposed.
HEAT STRESSIn extreme climate conditions it is very important to make sure the correct measures are taken to prevent heat exhaustion in problematic areas, such as steel deck work and when the WBGT index reaches 30˚C. Cold drinking water must be made readily available when extreme temperatures are experienced. Being dehydrated can be serious to workers’ health and they can get dehydrated even without knowing it, so it is very important to make sure that workers take in adequate amounts of water during the course of the day.
ABLUTIONSConstruction sites must always have suitable facilities available to its workers and it is important that these facilities are clean and maintained.
THESE ARE THE REQUIREMENTS REGARDING FACILITIES:
• There must be 1 toilet provided for every 30 employees with toilet paper available at all times.
• There must be 1 shower available for every 15 employees.
• Soap must be made available for washing hands, as well as a means for drying hands.
• Separate changing areas and facilities must be provided for females employees.
• There must also be adequate storage facilities provided in the change rooms.
• It is very important to keep all ablution facilities hygienically clean at all times.
EATING/COOKING FACILITIESA suitable, separate, weather-protected area must be designated as an eating area. Make sure this area is separate from the changing area. Make sure there is an adequate number of refuse bins with lids available in this area. Should food be prepared and cooked on site it is advisable that the local Health Department approves the facilities.
NOV / DEC 201338
POLLUTION OF ENVIRONMENTA pollution policy which is signed by the CEO must be published on site. Make sure that there are adequate measures in place to control dust that is generated on site. A good practice is to water the gravel roads on a daily basis. Ensure that empty cement pockets, plastic wrappings, bags and packing material are correctly accumulated and disposed of in the correct manner.
Make sure that no oil, chemicals or fuels such as petrol and diesel are discarded into storm water drains. Only dispose of these in the correct manner and obtain a certificate from the service provider that disposed of it.
HAZARDOUS CHEMICALSIf there are hazardous substances being used on site, such as diesel, oil, cement, thinners, paint, acids and degreasers it is essential that they are identified and recorded, with a list of such made available. These substances must be stored safely with segregation principles being applied at all times. Material Safety Data Sheets (MSDS) indicating hazardous properties and emergency procedures in case of incident must be on file and readily available.
For more information on workplace, environment, health and hygiene and other related safety topics, visit www.safebuild.co.za.
Article supplied by Neels Nortje, Health & Safety Manager of the Master Builders Association KwaZulu Natal.
HE
ALT
H &
SA
FE
TY
Reg No: CoR18.3 2013/068719/07 VAT No: 4930188372
20 0 0 H o u r Salt Spray Test Co m i n g So o n
JHB Branch: Contact: Tanny | Tel: 011 - 979 5026/7 | Cell: 082 782 6854 | P.O. Box 14353, Bredell, Kempton Park
Manufactured in Taiwan
DBN Branch: Contact: Summers | Tel/Fax: 031 - 765 1604 | Cell: 082 564 1463 | [email protected]
www.hengfuscrews.co.za
NOV / DEC 2013 39
To coincide with World Architecture Day, the South African Institute of Architects (SAIA) and AfriSam will launch the third bi-annual Award for Sustainable
Architecture.
“In South Africa the number of sustainable buildings going up is alarmingly low compared to the general number of buildings being erected,” says Sindile Ngonyama, the new president of SAIA and one of the jurors for this year’s awards. “However, in the corporate and commercial arena, there is a noticeable move in this direction.”
His view is supported by last year’s award winners, two rural schools (Lebone II College in the North West and Vele Secondary School in Limpopo) that illustrate a way forward for sustainable design in South Africa.
“I am positive that, with teamwork amongst the trend setters in the built environment, and with constant education, the next decade is going to show drastic changes in our landscape, leaning towards sustainable methods of design and construction, which will lead to delightful architecture.”
The AfriSam-SAIA Award for Sustainable Architecture recognises outstanding achievement in sustainable architecture, as well as creating public awareness and debate on architectural issues. There are two entry categories – one for built work and the other for works of social importance, including research. Entries are evaluated against a range of criteria including people upliftment and planet rejuvenation.
AW
AR
DS Sustainability top of the agenda
on World Architecture DayAs entries open for Architecture AwardsPushing the boundaries of design, rethinking our relationship with the
environment and delivering sustainable built solutions for a future world population of 8 billion was top of the agenda as architects from across
the globe marked World Architecture Day on the 7th of October.
NOV / DEC 201340
Fellow juror, and one of South Africa’s foremost sustainability thinkers, Gita Goven, commented, “We are on the threshold of huge shifts in the way development works. These require us all to raise our awareness of both human development and settlement requirements and foster a deeper understanding of how the environment can be regenerated, rather than depleted or degraded, as we address our developmental needs.”
Joining Ngonyama and Goven on the juror panel for this year’s awards is Llewellyn van Wyk, principal researcher in the built environment at the Council for Scientific and Industrial Research, Daniel K. Irurah, senior lecturer at Wits University, Philippa Tumubweinee, senior lecturer at the Department of Architecture at the University of the Free State, Vincent Blackbeard and AfriSam’s Mike McDonald.
For AfriSam’s CEO, Stephan Olivier the Awards are an important platform to drive broad issues around sustainability. “We recognise that the next decade is going to see major changes and innovations in architectural approaches to the built environment, largely driven by social development needs. Our sponsorship of these awards is our way of encouraging both established and emerging architects to focus on building in an authentically sustainable way, in both the consumer and commercial arenas.”
Entry forms for the AfriSam-SAIA Award for Sustainable Architecture can be downloaded from www.4tmrw.co.za.
Videos of last year’s finalists and winning projects can also be viewed at www.4tmrw.co.za.
NOV / DEC 2013
AW
AR
DS
41
Occupied for the first time in early June 2013, the R2.7 billion Standard Bank development in Rosebank, Johannesburg is not only an impressive addition to the
Johannesburg skyline, but also a prime example of the growing trend towards ‘green’ buildings in South Africa. Dulux Trade’s Ecosure range contributed significantly to the development through being the selected coatings specified for the project.
Situated on the corner of Oxford and Bolton Roads in Rosebank, this grand new building development comprises of 70 000 square metres of state-of-the-art office space and 3 900 parking bays spread across a nine-storey building, an eleven-storey building and five super-basement levels. A central multi-volume atrium extends the public piazza into the building complex.
PA
INT
S &
CO
AT
ING
S Dulux Trade’s Ecosure Range Contributes to Standark Bank
Rosebank’s Five-Star Green Rated Building Status
Standard Bank Rosebank complex adds gravitas to Johannesburg’s high rise skyline
NOV / DEC 201342
It is anticipated that up to 5 000 people will be working in the new building complex by the end of 2013. In addition to the abundance of excellent office and working space, there are also rest and meeting rooms, as well as multiple pause areas. There are also superb access and visibility features, as well as more than 400 indigenous trees in the external garden that features a linear water feature with granite rocks recycled from a quarry.
Lining up with Standard Bank’s philosophy, the architects concentrated on improving contact between the inside and the outside, lowering the boundary between the office space and the outside elements, with everything designed around the central atrium.
Without doubt, this development is a landmark contribution to Rosebank – Johannesburg’s third high rise node after the CBD and Sandton – and is ideally located close to the Rosebank Gautrain station, the Bus Rapid Transit system and the M1 highway.
According to Moncardo Chitray, owner of Durban-based Montreal Projects, the main painting contractor, the Standard Bank Rosebank project required “serious teamwork, dedication and commitment” between Durban and Johannesburg to get the job done. At its peak, the 18-month project had 55 painters on site.
“The Green Building Council’s green-rating requirements and Standard Bank’s stringent health and safety requirements made the project quite challenging, but everything went well and we were very pleased with the end result,” said Chitray.“This really was a great team effort between us and our team in Durban, our team in Johannesburg, the paint distributor in Johannesburg and Dulux itself.”
The building complex has elicited considerable media coverage – both print and electronic – with many journalists, talk show hosts, readers and listeners commenting on the impressively imposing nature of the development. Commentators have stressed the eco-friendly qualities of the development.
Initiated in June 2010, the Standard Bank Rosebank development featured a variety of the country’s major contractors and suppliers including WBHO (main building contractor) and Grosskopff, Lombart, Hybrechts & Associates (architects). Montreal Projects was the main painting contractor and the main coatings used included Dulux Trade’s Ecosure Primer, Ecosure Matt, Ecosure Silk and Ecosure Eggshell Enamel.
NOV / DEC 2013
A full-colour EnvironmentalReference Resource for South Africa
'I use The Enviropaedia as my ''Green Bible'' to find environmental information and organisations. It is probably the single most important education tool you need to join the fast blossoming green rblossoming green revolution'.
Michelle Garforth-Venter
CONTAINING
www.enviropaedia.com
To get your copy, call us on 0861 000 810 or email us on [email protected] or visit
PA
INT
S &
CO
AT
ING
S
NOV / DEC 201344
ENVIROWASH SYSTEM AND CONTAINER RECYCLING VITAL PART OF ENVIRONMENTALLY-FRIENDLY PROCESS
With green rating being one of Standard Bank’s fundamental requirements for the development – which has a Five Star Green Rating from the Green Building Council of SA – green standards were introduced to the project from the beginning of the painting and decorating process, right through to the disposal of containers used.
Throughout the preparation and painting process – which lasted around 18 months – there was a total focus on eco-friendly practises and behaviour. A number of Dulux Trade’s special ‘EnviroWash’ systems were utilised on the site, by the main painting contractor and by smaller painting contractors responsible for steelwork and walls.
The Dulux Trade Environmental Wash System (‘EnviroWash’) converts waterborne paint washings into clear water and solid waste, allowing for easy and safe control and disposal.
Significantly, Dulux Trade was one of the ‘silver’ founding members of the Green Building Council of South Africa, a factor that has seen Dulux products specified for many of South Africa’s top green star rated buildings in recent years. “The painting element of this major project ran extremely smoothly with the Ecosure range providing excellent colour consistency,” said van der Merwe.
Stressing the lengths that were gone to in order to ensure maximum eco-friendliness, he said that in addition to all clean-ups being done on site via the EnviroWash system, all paint containers were taken away and recycled by a waste disposal company which issued a certificate of compliance to guarantee that the proper recycling processes had indeed been followed.
ED
UC
AT
ION
& T
RA
ININ
G
NOV / DEC 2013 45
“MBA North’s policy is to secure the most appropriate service or training provider at the most reasonable tariff. Apart from ensuring the provider’s accreditation and high standard, we also negotiate fees that benefit our members. Non-members will pay more than members for the courses, but even non-members will find the cost generally still cheaper than offered by competitors,” Landmann states.
COURSES MBA NORTH CURRENTLY PROVIDES INCLUDE:
• Workshops on the drawing up of building contracts offered by the Joint Building Contracts Committee (JBCC)
• Reading and interpreting construction drawings• BBBEE seminars and workshops• Drivers’ training courses: “These courses provide tuition
for members’ drivers on how to drive to reduce wear and tear on the vehicle, lower fuel consumption, be aware of, and able to handle, any hazardous circumstances to reduce road accidents and fatalities,” Landmann explains.
• Various other courses on construction Health and Safety• Development Course for Small Builders: “The students
learn to set up and run their contracting businesses efficiently. This is not a generic business course, but specifically designed for the building contractor,” he adds.
• Short courses on Project Management• Skill courses dealing with, for example, Business Writing,
Microsoft Office, Outlook, and Excel• Various environmental training courses.
Landmann adds, “Furthermore, should there be a need for a specific course, workshop or seminar on a topic that our members need, MBA North will research and organise it. This service is not only restricted to our members in Gauteng as we have successfully organised many courses in all four northern provinces of South Africa.”
Training courses a major priority for MBA North Master Builders Association (MBA) North is placing increasing emphasis on
presenting training courses for members to enhance their productivity, knowledge and efficiency across the board, from senior management to employees, says Deon
Landmann, Education, Training and Transformation Manager of MBA North.
Training courses on any topic required by members can generally be provided by MBA North.
Trinchero says he looks forward to the myriad challenges he will face in the job. “I come in at a time when the boom times of the Soccer World Cup and the advent of
the steelwork for the large power station projects are really part of the past. Currently we are faced with much tougher times in the steel construction industry in the Southern African region where large projects are few and far between and international competition is growing. I will, therefore, at least in the short- to medium-term, be fully focused on implementing strategies that will help SAISC members to get more business,” Trinchero says.
He adds that there are several things that will have to be done to ensure that this happens including, inter alia, growing steel’s market share in the traditional concrete, timber and plastic construction industries, increasing structural steel exports, continuing to promote the light steel frame industry, ensuring the largest possible slice of government business for the local steel construction industry, and developing an increasing number of young South Africans to become part of our industry.
Trinchero has been involved in the steel industry for almost 25 years. Starting off in 1988 as a young Dorbyl structural engineering bursary student, he completed his BSc in civil
engineering at Wits in 1990 and then, in 1993 did a Masters under the supervision of Professor Alan Kemp, who introduced him to the workings of the SAISC through the Steel Design Code Committee. After spending some additional time as a lecturer at Wits, Trinchero joined the SAISC in 1998 as Consulting Development Engineer and Technology Director under the guidance of Dr de Clercq.
Wanting some commercial experience, Trinchero took up the position as Engineering Manager at Macsteel Trading in 2003, ultimately becoming Group Business Development and Technical Director at Macsteel Corporate Services. Throughout his 11 years at Macsteel he never lost touch with the SAISC, having been involved with several of its committees.
“From a career perspective, I feel like I’ve come home,” Trinchero says. “Under Hennie de Clercq the SAISC has done outstanding work and is today one of the most effective industrial institutes in the country. But we cannot rest on these laurels. There is still much work to be done and I look forward to it,” Trinchero concluded.
Paolo Trinchero is 44 years old and is married with three children.
NE
WS New SAISC CEO appointed
Paolo Trinchero has been appointed the new CEO of the Southern African Institute of Steel Construction (SAISC). He takes over from Dr Hennie de Clercq
who has retired after being at the helm of the SAISC for the last 13 years.
NOV / DEC 201346
Paolo Trinchero has been appointed the new CEO of the Southern African Institute of Steel Construction.
• Size: 220mm x 95mm - perfect for mailings or handout to customers• Full-colour with gloss UV-varnish finish + affixed magnets • Custom-printed with your logo and contact information• Prices include design, production costs and magnets
• 250 calendars @R2 199 excl. VAT and shipping• 500 calendars @R2 399 excl. VAT and shipping• 1000 calendars @R2 599 excl. VAT and shipping
Call 0861-727-663 or 021-595-3781 or e-mail [email protected] for more information.
CUSTOM BRANDING FOR A YEAR!
THESE HANDY CALENDARS OFFER THE IDEAL SOLUTION FOR YEAR-LONG MARKETING!
ORDER YOUR 2014 CALENDARS NOW!
NEW FROM TRADEMAX — HANDY 2014 CALENDARS THAT WE CAN CUSTOMISE FOR YOUR BUSINESS:
Deryck Spence, executive director of SAPMA, says the Association has, in recent months, learnt of at least three incidents where members’ imports contained
unexpected surprises.
“In the first incident, SAPMA members who were importing raw materials from Egypt were provided with quality samples – but woefully sub-standard shipments after orders had been placed. The orders totalled millions of Rands and SAPMA members stood to incur devastating losses. SAPMA raised the matter with the local Egyptian Trade and Industry department and then also with the Egyptian Embassy in South Africa – and managed to get compensation for our members.
“Then, in the second instance, a SAPMA member ordered titanium tri-oxide from a Chinese supplier. The first container to arrive in South Africa was filled with the correct raw material – but the second contained sea sand. No compensation could be obtained in this case.
“Finally, another SAPMA member also nearly became a victim of a Chinese export sham. Our member ordered a container load of 210 litre drums of solvent, but the drums that arrived in the container that reached South Africa were filled with sea water. In this case, fortunately, the member had bought the shipment on a Letter of Credit basis and managed to instruct the bank involved to stop payment,” Spence concluded.
NE
WS Coatings industry warned
about fraudulent importsThe SA Paint Manufacturing Association (SAPMA) has warned its
members to be extra cautious when purchasing overseas-sourced raw materials for paint production to avoid falling victim to fraud.
SAPMA has warned its members that there could be nasty surprises in the containers supposed to carry imported raw materials for paint production.
NOV / DEC 201348
Whatever the size of your project, its success and sustainability both
depend on the quality of the steel products you use. But how will you
know that the steel products you use are of an appropriate quality?
To assure you of quality, sustainability and leadership we at ArcelorMittal
South Africa mark and brand our products. Some of these products are
Chromadek®, plate, galvanised coil and rebar. Beware of unbranded
substandard material which cost you much more in the long-run than
you initially believe. Rest assured in the knowledge that ArcelorMittal
South Africa’s products consistently stand for quality.
What to look out for when you are looking for quality in steel
Bran
d N
ame
Pr
oduc
t Wid
th
C
oil N
o.
Dat
e of
Pro
duct
ion
Prod
uct T
hick
ness
Zin
c C
oatin
g
T
ime
of P
rodu
ctio
n
transforming tomorrow
Arcelormittal South AfricaDelfos Boulevard, VanderbijlparkPO Box 2 Vanderbijlpark, 1900, South Africawww.chromadek.com
Jun
e15
Bra
nd
Mo
vem
en
t 09
1304
297x210 Quality091304final.indd 1 09/10/2013 22:12
®
