8

SAF CFIP Products brochure ETSI edition

Embed Size (px)

DESCRIPTION

CFIP product family is the new next generation product line which is targeting the growing demands for data transmission over microwave radio.

Citation preview

Page 1: SAF CFIP Products brochure ETSI edition
Page 2: SAF CFIP Products brochure ETSI edition

SAF Tehnika is among the world’s top microwave carrier-class point-to-point radio manufacturers, publicly traded in NASDAQ, ISO certified, with R&D and complete production in Europe, covering spectrum 300MHz -38 GHz and licence-free 24 GHz with capacities up to 366 Mbps full-duplex (per radio). Company has 9 years experience in designing and manufacturing durable, high quality all outdoor radios.

The company offers 2 main product lines:CFIP series- 1.4 GHz Marathon FIDU (long haul),- 366 Mbps Lumina FODU (Optical&Electrical Gigabit Ethernet),- CFIP-108 FODU (Fast Ethernet),- 363 Mbps CFIP PhoeniX Hybrid Split Mount System.SAF FreeMile- 100 Mbps full duplex licence-free FODU.

SAF Tehnika

CFIP FODU Technical Specification

Radio & Modem Full outdoor system with built-in radio, modem and traffic interfaces

Product name CFIP - 108 FODU CFIP Lumina FODUFrequency Bands 6, 7, 8, 10, 11, 13, 15, 17, 18, 23, 24, 26, 38 GHz

Capacity Up to 108 Mbps Up to 366 Mbps

Channel bandwidth 7/14/28 MHz 14/28/40/56 MHz

Modulation 4QAM, 16QAM, 32QAM, 64QAM; for 10MHz bw only: 128QAM

4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM

Protection Switching 1+0 Ring/Mesh (with STP)

1+0, Ring/Mesh (with RSTP/MSTP), 1+1 HSB switch

Aggregation - 2+0 (Ethernet Aggregation)

ACM switching Hitless

InterfacesEthernet port 1xRJ-45 (electrical) 1 or 2 RJ-45 (electrical) or 1 or 2 ODC (fiber optical)

hybrid: 1 RJ-45 (electrical) & 1 ODC (optical)

E1 4xE1 (18-pin connector) none

Power PoE+ (not IEEE standard) Outdoor power connector, PoE with surge arrestor solution

RSSI port BNC

Serial Port Dual-BNC

Connection to antenna Standard flange according to frequency

CFIP Lumina FODUCFIP - 108 FODU

CFIP-108 is primarily designed for IP networks and provides Fast Ethernet interface with capacities from 8 Mbps up to full duplex 100 Mbps Fast Ethernet. In addition to that, CFIP-108 has a 4xE1 port for legacy equipment connectivity and for use in hybrid TDM/IP networks.

CFIP Lumina systems are intended for Gigabit Ethernet backbone applications delivering up to 366 Mbps per radio. 2+0 aggregation is available for higher bandwidth users. Both single or dual, electrical and fibre optical interface versions are available, as well as hybrid version with 1 optical and 1 electrical port.

ManagementManagement ports RJ-45 (same as traffic port) RJ-45 (electrical) or ODC (optical)

Management In-band In-band (traffic port) or VLAN port seperated

SNMP SNMP traps, MIB, SNMP v1/v2c, RMON

EMS Web based HTTP, Telnet, FTP, Terminal

Performance graphs Uptime, Rx level, Tx level, System temperature, Radial MSE, LDPC decoder stress, constellation diagram, equalizer graph

Ethernet performance Per port Ethernet counters, Enhanced radio Ethernet statistics

Loopbacks E1, modem

Page 3: SAF CFIP Products brochure ETSI edition

CFIP FODU Ports

CFIP-108- RJ-45- 18-pin (balanced E1)- BNC (RSSI)- Twin BNC (Serial)

CFIP Lumina (Optical)- 1 or 2 optical ODC (Eth)- 48V DC (Power)- BNC (RSSI)- Twin BNC (Serial)

CFIP Lumina (Electrical)- 1 or 2 electrical RJ-45 (Eth)- 48V DC (Power)- BNC (RSSI)- Twin BNC (Serial)

CFIP Lumina (Hybrid version)- 1 electrical RJ-45 &

1 optical ODC (Eth)- 48V DC (Power)- BNC (RSSI)- Twin BNC (Serial)

Modulation

Channel bandwidths (MHz)

CFIP-108 FODU CFIP Lumina FODU

7 14 28 14 28 40 56

4QAM 8,5 17,1 35,2 17 35 49 72

16QAM 17 34,5 69,4 34 69 98 135

32QAM 21,2 43,1 88,6-108 45 88 127 186

64QAM 28,2-30,8 57,1 100 57 115 163 241

128QAM - 68,5-74,3 - 68 138 196 289

256QAM - - - 79-86 162-175 229-245 337-366

CFIP-108 and CFIP Lumina FODU total payload capacity (Mbps)

EthernetSwitch Type Managed Fast Ethernet Layer 2 Managed Gigabit Ethernet Layer 2

Max frame size 1916 bytes 9728 bytes

MAC table 1K entries; automatic learning and aging 4K entries; automatic learning and aging

Packet buffer 32KB; non-blocking store&forward 128KB; non-blocking store&forward

Flow Control 802.3x

QinQ (Double Tagging) Yes, 802.1 ad (Providing Bridging Technique)

QoS 64 level DiffServ (DSCP) or 8 level 802.1p mapped in 4 prioritization queues with VLAN support

QoS queuing Yes Fixed or weighted (configurable ratio)

VLAN support 802.1Q (up to 15 concurrent traffic VLAN) 802.1Q (up to 4K VLAN entries)

Spanning Tree Protocol 802.1D-2004 STP, 802.1D-2004 RSTP 802.1D-2004 RSTP, 802.1Q-2005 MSTP

MEF MEF 9, MEF 14

Mechanical & ElectricalPower consumption 22 - 33 W (SP)

38 - 46 W (HP)27 - 40 (SP) 43 - 52 (HP)

Weight 3.5 kg 3.9 kg

Temperature Range -33°C to +55°C

Dimensions: HxWxD, mm 288x288x80

Operational use EN 300 019 Class 4.1, IP65 ODU: EN 300 019 Class 4.1, IP65

Page 4: SAF CFIP Products brochure ETSI edition

Radio & ModemProduct name CFIP PhoeniX Split Mount CFIP PhoeniX M Split MountFrequency Bands 6, 7, 8, 10, 11, 13, 15, 18, 23, 26, 38 GHzCapacity IDU: up to 363 Mbps

ODU Unified Band: up to 363 MbpsIDU: up to 348 Mbps, up to 63E1, up to 2xSTM-1 per every 1+0 link

ODU Unified Band: up to 348 MbpsChannel bandwidth IDU: 3.5/7/14/28/40/56 MHz

ODU Unified Band: 3.5/7/14/28/40/56 MHzIDU: 7/14/28/40/56 MHz

ODU Unified Band: 7/14/28/40/56 MHzModulation 4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAMProtection Switching 1+0, 1+1 (HSB, SD, FD), Ring/Mesh (with RSTP/MSTP),

2+0, 3+0, 4+0 (Ethernet Aggregation)1+0, 1+1 (HSB, SD, FD), Ring/Mesh (with RSTP/MSTP),

E1 ring protection, STM-1 Add/Drop, 2+0, 3+0, 4+0 (Ethernet Aggregation)

Aggregation 2+0, 3+0, 4+0 (Ethernet Aggregation) 2+0, 3+0, 4+0 (Ethernet Aggregation), 2+0 aggregation between single MAC,

2+2 protected aggregationACM switching Hitless Yes

ManagementManagement ports RJ-45, DB-9 2xRJ-45, DB-15Management In-band Out-band managamentSNMP SNMP traps, MIB, SNMP v1/v2c SNMP traps, MIB, SNMP v1/v2/v3EMS Web based HTTP, Telnet, FTP, TerminalPerformance graphs Uptime, Rx level, Tx level, System temperature,

Radial MSE, LDPC decoder stress, constellation diagram, equalizer graph

Rx level, Tx level, System temperature, Signal/Noise (SNR) level, System performance,

constellation diagram, equalizer graphEthernet performance Per port Ethernet counters, Enhanced radio Ethernet

statisticsEthernet switch statistics

Loopbacks E1, modem, IF Modem, radio, E1 (local, remote)

EthernetSwitch Type Managed Gigabit Ethernet Layer 2

Max frame size 9728 bytes

MAC table 4K entries; automatic learning and aging

Flow Control 802.3xQinQ (Double Tagging) YesQoS 64 level DiffServ (DSCP) or 8 level 802.1p mapped

in 4 prioritization queues with VLAN support64 level Diffserv (DSCP) or 802.1Q VLAN Tag Priority,

IPv4 TOS priority, Port priorityQoS queuing Fixed or weighted (configurable ratio) Weighted

VLAN support 802.1Q (up to 4K VLAN entries)

Spanning Tree Protocol 802.1D-2004 RSTP, 802.1Q-2005 MSTP 802.1D-1998 STP, 802.1D-2004 RSTP

MEF MEF 9, MEF 14

Mechanical & ElectricalPower consumption IDU: 20 - 30W / ODU: 16-27 W(SP); 32-39W(HP) IDU: 30 - 40W / ODU: 13 - 18WWeight IDU: 3.1 kg / ODU: 3.5kg IDU: 3.4 kg / ODU: 3.5kgTemperature Range IDU: -5°C to +45°C / ODU: -33°C to +55°C IDU: -5°C to +55°C / ODU: -33°C to +55°CDimensions: HxWxD, mm IDU: 1U rack (45x430x240)

ODU: 288x288x80IDU: 1U rack (44.5x445x238.5)

ODU: 288x288x80Operational use ODU: EN 300 019 Class 4.1, IP65; IDU: 300 019 Class 3.1E

CFIP PhoeniX Split Mount CFIP PhoeniX M (Modular) Split Mount

CFIP PhoeniX split mount system is designed to fit in classical telecom architecture with a radio located outdoors and a sheltered indoor unit. CFIP PhoeniX also enables transition from TDM networks to hybrid TDM/IP networks providing up to 20E1 + GigE. Total maximum capacity is up to 363 Mbps full duplex (per radio).

CFIP PhoeniX M split mount system consists of PhoeniX M IDU and PhoeniX ODU (also with XPIC functionality). PhoeniX M IDU provides up to 63E1 and 2xSTM-1. Total maximum capacity is up to 348 Mbps full duplex (per radio).

CFIP Split Mount Technical Specification

Page 5: SAF CFIP Products brochure ETSI edition

CFIP PhoeniX ODU Ports - N-type (data + power)- BNC ( RSSI)

Modulation

Channel bandwidths (MHz)CFIP PhoeniX IDU CFIP PhoeniX M IDU*

3,5 7 14 28 40 56 7 14 28 40 56

4QAM 3 8 17 35 49 71 8 17 36 52 74

16QAM 7 17 34 69 98 135 16 36 74 108 144 - 152

32QAM 9 21 45 88 127 182 21 46 94 132 192

64QAM 13 28 57 115 163 240 ** 55 112 164 232

128QAM - 34-36 68 138 196 287 - ** 128 - 136 188 264

256QAM - - 79-86 161-174 229-245 335-363 - - 144 - 160 - 312 - 348

CFIP PhoeniX Split Mount IDU Interfaces

CFIP PhoeniX M IDU Interfaces

CFIP PhoeniX and CFIP PhoeniX M IDU total payload capacity (Mbps)

Ethernet port 4xRJ-45 (Gigabit Ethernet electrical)

E1 20xE1 (RJ-45)

Power IDU power connector

Serial Port DE9 (RS-232)

EOW 2x 3.5mm headset ports (Mic&Speaker)

Alarm port DB26HD

1+1 Port RJ-45

Connection to ODU N-Type

Bas

e M

odul

es

Standard Base - Link capacity: 50 / 100 / 155Mbps A standard module provides connectivity up to 155Mbps. By adding an expansion module – up to

37 x E1. Interfaces: • 14 x E1, high-density Molex connector; • 2 x E1, RJ-48C connector; • Voice, Data ORW RJ-48C connectors; • 100BaseTX, 25-100 Mbps, two RJ-45 ports

Enhanced Base - supports ADM up to 63E1 via STM-1

42E1 Base Provides 63E1 capacity with 21E1 expansion module. Interfaces: • 42 x E1, 3x high-density Molex connector; • Voice, Data ORW RJ-48C connectors; • 100BaseTX, 25-100 Mbps, two RJ-45 ports

GigE Base Provides connectivity for Gigabit Ethernet. Interfaces:• 4x10/100/1000Base-T ports with RJ-45 connector; • Ethernet SFP port; • 2 x E1, RJ-48C connector; • Voice, Data ORW RJ-48C connectors

Enhanced GigE Base with jumbo frames up to 9000 bytes packet

Enhanced GigE Base - supports ADM up to 63E1 via STM-1

Opt

iona

l Mod

ules

16E1 Expansion module • 14 x E1, high-density Molex connector; • 2 x E1, RJ-48C connector

21E1 Expansion module 21 x E1, 2x high-density Molex connector

STM-1 Optical mini module STM-1, Single mode 1310 nm, SC Duplex Transceiver. Unconditionally eyesafe laser IEC 825/CDRH Class 1 Compliant

STM-1 Electrical mini module STM-1, 2xBNC, ITU-T Rec. G.703, 75 Ω

2xSTM-1 Optical expansion module 2xSTM-1, Single mode 1310 nm, SC Duplex Transceiver. Unconditionally eyesafe laser IEC 825/CDRH Class 1 Compliant

2xSTM-1 Electrical expansion module 2xSTM-1, 2xBNC, ITU-T Rec. G.703, 75 Ω

2xSTM-1 SFPE module 2 SFP ports for connection various optical or electrical adapters corresponding to STM-1 standards

Mod

em

Unified Band Modem • 7-56 MHz, QPSK - 256QAM, • RJ-45 (XPIC), • TNC (connection to ODU)

* Capacities are subject to change ** Under development

Page 6: SAF CFIP Products brochure ETSI edition

nHigh capacity system with up to 20E1 and up to 363 Mbps Gigabit Ethernet - ideal for building hybrid networks to facilitate transition from TDM to IP;

nIndustrial grade fanless design increases reliability and enables low power consumption;

nLeading edge technology utilizing 256QAM modulation and 56MHz channel bandwidth allows high capacity throughput up to 366 Mbps;

nExcellent upgrade for existing PDH split mount systems;

nUp to 4094 concurrent VLAN traffic allows building many port-to-port networks paths for specific client services;

nJumbo frame size support (up to 9728 bytes), allows using longer header info (VLAN, MPLS) and transmitting more useful content and less headers, thus gaining on total throughput.

CFIP PhoeniX Highlights

nExcellent system gain allows to efficiently upgrade PDH radios to 108 Mbps capacity without increasing antenna sizes;

nLow power consumption enables Power over Ethernet and use of solar/wind energy;

nACM and ATPC for high availability and high density deployments;

nVery high flexibility allows to configure the system to various channel bandwidths, modulation schemes and capacity settings.

nSNMP support for remote network monitoring and mana-gement.

CFIP-108 FODU Highlights

nLeading edge technology with up to 256QAM modu-lation and 56MHz channel bandwidth allows high capacity throughput up to 366 Mbps (per radio);

nOptical Ethernet connections provide excellent protec-tion against lightning strikes and allow long distances between user equipment and the radio;

n2 Gigabit Ethernet ports provide the convenience of having separate ports for management (both basic and advanced) and user traffic;

nUp to 4094 concurrent VLAN traffic allows building many port-to-port networks paths for specific client services;

nJumbo frame size supports up to 9728 bytes, which allows using longer header info (VLAN, MPLS) and transmitting more useful content and less headers, thus gaining on total throughput;

nACM and ATPC for high availability and high density deployments.

CFIP Lumina Highlights

nRing configuration with built-in add-drop functionality for up to 63E1;

n348Mbps radio (56MHz) for capacities of up to 933 Mbps per link in 3+0 configuration;

n63E1 + 25-30Mbps Ethernet with a single ODU (28 MHz);

nEasy upgrade of existing set-up to 1+1 or 2+0, 3+0, 4+0 configurations with GigE.

CFIP PhoeniX M Highlights

Page 7: SAF CFIP Products brochure ETSI edition

SAF CFIP-108, CFIP Lumina and CFIP PhoeniX ODU max Tx Power

Application diagram of CFIP Products

Application diagram of CFIP PhoeniX M

Modulation Standard/High Tx Power, dBm6, 7, 8 GHz 10, 11, 13, 15 GHz 17 GHz 18, 23, 26 GHz 24 GHz 38 GHz

4QAM +19 / +27 +19 / +25 +5 +19 -20 to 0 +1716QAM +18 / +26 +18 / +24 -25 to +4 +18 -20 to -1 +1632QAM +17 / +25 +17 / +23 -25 to +3 +17 -20 to -2 +1564QAM +15 / +23 +15 / +21 -25 to +1 +15 -20 to -4 +13128QAM +15 / +23 +15 / +21 -25 to +1 +15 -20 to -4 +13256QAM +12 / +20 +12 / +18 -25 to -2 +12 -20 to -7 +10

Page 8: SAF CFIP Products brochure ETSI edition

© SAF Tehnika 2012Issue 1: 07/2012

SAF Tehnika JSC24a, Ganibu dambisRiga, LV-1005, Latvia

Phone: +371 67046840Fax: +371 67046809

[email protected]