Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
www.balcousa.com
BuyLine 72651 0 1 4 4 3 BAL
PLES
Safe egress when emergency electrical lighting and signage fail.
RS-405L-PLILLUMITREADTM RETROFIT STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1/2” PL INSERT
RS-405L-PL-100ILLUMITREADTM RETROFIT STAIR NOSINGMILL FINISH ALUMINUM EXTRUSION
IllumiTread™, For Safety’s Sake
Electrical emergency lighting and signage
are subject to failure, leaving egress
routes in the dark. IllumiTread™ is failsafe,
providing a non-electric, highly visible
routing system that makes egress faster and
safer for many hours after power loss.
The IllumiTread™ product line includes
Stair Nosings, Aisle Markers, Demarcation,
Hand Rail Markers and Signage all
designed to help assure safe egress after
the loss of electrical power in a building.
IllumiTread™ powered by glowZONETM
uses only the highest grade Strontium
Aluminate pigments, this means brighter
glow, upwards of 30 times brighter than
standard Zinc Sulfide photoluminescence
materials. IllumiTread™ meets International
Building Code 403.16 Exit Path Markings,
NYC reference standard RS-6-1 and NFPA
101 Life Safety Code Exit Path Markings.
Product highlights of IllumiTread™TM
What sets IllumiTread™ apart?Balco’s IllumiTread™ powered by glowZONETM delivers the highest luminescence levels available, but requires significantly less ambient light to recharge.
LEADING EDGE & STAIR NOSINGS
STAIR NOSING PRODUCTS
R-315P-PLILLUMITREADTM STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1/2” PL INSERT
R-315P-PL-100ILLUMITREADTM STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1” PL INSERT
4199ILLUMITREADTM STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1” PHOTOLUMINESCENT INSERT
2140ILLUMITREADTM STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1/2” PHOTOLUMINESCENT INSERT
DXH-330-PLILLUMITREADTM STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1/2” PL INSERT
P-3310-PL-100ILLUMITREAD™ STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1” PL INSERT
DXH-330-PL-100ILLUMITREADTM STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1” PL INSERT
RS-609L-PLILLUMITREAD™ RETROFIT STAIR NOSINGMILL FINISH ALUMINUM EXTRUSIONw/ 1/2” PL INSERT
XH-330-PLILLUMITREADTM STAIR NOSING
MILL FINISH ALUMINUMw/ 1/2” PL INSERT
Please select color from the abrasive color chart.Note: Finished nosings have slightly rounded end. Optional square ends available. Available in 2” (52mm) increments from 36” (914mm) to 120” (3028mm) lengths (except for 4199 – 10’ only)
Exceeds New York City RS 6-1 and RS 6-1A Exceeds NFPA 101Brightness Rating RequirementsPer NYC RS 6-1Model 4199 – 1” – BR: 41-10-7Model RS-607L-PL100 – 1” – BR: 41-10-7Model RS-405L-PL-100 – 1” – BR: 41-10-7Model R-315-PL-100 – 1” – BR: 41-10-7All other models – 1⁄2” – BR: 106-29-20
Highly durable and built for permanent
Easy, permanent installation
Easy clean – no other maintenance required
Non-flammable (fire resistant)
Non-toxic
Not radioactive
BR = Brightness Rating - the level of luminance measured at 10, 60 and 90 minutes, respectively, after removal of the charging light source.
BENEFITS
earth brown
* Additional Charge
black redwood yellow
terra cotta cactus greensilver gray
COLOR SELECTION FOR ABRASIVE
*Saf-T-Glo™ II yellow
photoluminescent
TECHNICAL
Passes UL 1994
Passes RS 6-1 Illuminence Test ISO 17398 (NYC minimum BR: 30-8-5) Passes ASTM E2072-1 FC exposure for 1 hour Meets ICC-ES AC169
(ASTM B117) tests
Passes RS 6-1 cleaning test – ASTM D 4828 – RESULT 10 (no residual soiling or staining – highest possible score, minimum required, requirement – 5)
Passes RS 6-1 flame spread test – ASTM D 635
Passes RS 6-1 toxicity test – Bombardier SMP800-C
Passes RS 6-1 radioactivity tests ASTM D3648
B117) tests.
Download CADs and PDFs at www.balcousa.com
0" MIN.2" MAX.
LEADING EDGE OF LANDING
0" MIN.2" MAX.
FLOOR MOUNTED PERIMETERDEMARCATION LINE
DIRECTIONAL SIGNAGE
HANDRAIL MARKINGS
0" MIN.1/2" MAX.**
0" MIN.2" MAX.*
PERIMETER DEMARCATION
Floor Mounted OptionDEMARCATION STRIPS - ALUMINUM (RIGID)
0" MIN.2" MAX.
0" MIN.2" MAX.
0" MIN.1/2" MAX.**
0" MIN.2" MAX.*
LEADING EDGE OF LANDING
DROPS TO FLOOR MOUNTEDDEMARCATION STRIP
WALL MOUNTED PERIMETERDEMARCATION LINE
DIRECTIONAL SIGNAGE
HANDRAIL MARKINGS
0" MIN.4" MAX.
Description Size
Model 4211c demarcation strips 1” x 120”
Model 4211 obstacle markings 1” x 78”
*Meets IBC 403-16 and Section 1024 Exit Path Markings, NYC reference standard RS-6-1 and NFPA 101 Exit Stair Path Markings.
4"MAXAT BENDS
4" MAXAT TURNS
Handrail MarkingsAcceptable placements for photoluminescent markings at stairways.
6'-6"MIN. ABOVE
FLOOR FLOOR MOUNTEDPERIMETERDEMARCATION LINE
WALL MOUNTEDPERIMETERDEMARCATION LINE
6'-6"MIN. ABOVE
FLOOR
Obstacle MarkingsAcceptable placements for photoluminescent markings at obstacles.
Model 4010c - 1” Handrail Strip - BR: 41-10-7
BENEFITS
Standard length 10’ with formed radius to suit handrails with diameter between 1 1/2” to 2”.
TECHNICAL
Wall Mounted Option
Sign Options/ Colors
On
Red
Off
On
Green
Off
Product Identification Item Stroke Dimensions Chevron Colors2570r 7” H X 2.28” 15¾” X 8½” Arrow Kit 2570r Red2570g 7” H X 2.28” 15¾” X 8½” Arrow Kit 2570g Green
IllumiTread™ Exit Sign75 ft Rated Sign, Powdered Coated on Aluminum Backing** Optional Aluminum Frame Available
VERTICAL CENTERLINE OF SIGNCENTERED WITH DOOR OR LOCATED
IN HALF OF DOOR CONTAININGDOOR LATCH
VERTICALCENTERLINE OFSIGN CENTEREDWITH DOOR
STANDARD DOOR-MOUNT EXIT SIGNOPTIONAL DOOR MOUNT SIGN WITH ARROW
18"
MA
X*
18"
MA
X*
18"
MA
X*
EXISTING ILLUMINATED EXITSIGN AS MAY BE REQUIRED BY BUILDING CODE
EXISTING ILLUMINATED EXITSIGN AS MAY BE REQUIRED BY BUILDING CODE
6" MAX
18"
MA
X*
18"
MA
X*
18"
MA
X*
6" MAX 6" MAX 6" MAX
SIGN MOUNTED ON THE WALL SURFACE DIRECTLY ADJACENT TO THE LATCH-SIDE
OF THE DOORWALL MOUNT SIGN(ARROW REQUIRED)
Door-Mounted Options
using the door-mounted options.
*Meets IBC 403-16 and Section 1024 Exit Path Markings, NYC reference standard RS-6-1and NFPA 101 Exit Stair Path Markings.
ElectricalCloset
18"MAX.
1505 1507 1508 1506
15051506
1507
1508
NOTE: TOP EDGE OF SIGNS TO BE 18" ABOVE FINISHED FLOOR(26" FOR EXISTING BUILDINGS)
DIRECTIONAL SIGNSABOVE THE WALL
Typical Signage Leading to a Dead End
Typical Transfer Level and “T Intersection
18"
MA
X*
18"
MA
X*
6” MAX 6” MAX
(SEE DOOR SIGN SCHEDULE FOR SIGNAGE)
1"- 2" WIDE SOLID CONTINUOUSPHOTOLUMINESCENT STRIP
IMMEDIATELYADJACENT
ILLUMI-FRAMEDOOR FRAME KIT(3020, 3025, 3030)
Wall-Mounted Options
using the door-mounted options.
Intermediate Exit Options Final Exit Options
Download CADs and PDFs at www.balcousa.com
Door Hardware Markings
4"MIN.
2 3/4"MIN.
1505
1505 1506
1507 1508
1509 1510
1511 1512
1513 1514
4MIN.
2 3/4"MIN.
1545
1545 1546
1547 1548
1549 1550
1551 1552
1553 1554
4"
1503
4"
4"
2 3/4"
6"MIN.
1"MIN.
1504
4"MIN.
Directional SignageOption 1 Option 2
Not An Exit
Intermediate and Final Exit
vMax™ UL-924 Exit Sign
4“ min
15“
71/2“
4“ min
#1545 MEA 245-05-M BR:76-22-15
1501
4“ min
15“
71/2
4“ min
#1545 MEA 245-05-M BR:76-22-15
L
1500
1502
1515 1516
15181517
1519 1520
1521 1522
1523 1524
Door-Mounted and/or Wall-Mounted Options
Download CADs and PDFs at www.balcousa.com
vMax™ 1005-1 vMax™ 1005-2 vMax™ 1005-3
Running man - Exit Signs
Item # Description Size
1501 Final exit 15” x 7.5”
1502 Final Exit through Lobby 10” x 14”
1503 Exit 18” x 8”
1504 Not an Exit 12.5” x 5.25”
1505 RMan, Right Arrow 5.25” x 9”
1506 RMan, Left Arrow 5.25” x 9”
1507 RMan Right, Down Stairs 5.25” x 9”
1508 RMan Left, Down Stairs 5.25” x 9”
1509 RMan Right, Up Stairs 5.25” x 9”
1510 RMan Left, Up Stairs 5.25” x 9”
1511 RMan Right Diagonal, Up Stairs 5.25” x 9”
1512 RMan Left Diagonal, Up Stairs 5.25” x 9”
1513 RMan Right Diagonal, Down Stairs 5.25” x 9”
1514 RMan Left Diagonal, Down Stairs 5.25” x 9”
1515 Exit, RMan Right, Right Arrow 9.5” x 8.5”
1516 Exit, RMan Left, Left Arrow 9.5” x 8.5”
1517 Exit, RMan Right, Down Stairs 9.5” x 8.5”
1518 Exit, RMan Left, Down Stairs 9.5” x 8.5”
1519 Exit, RMan Right, Up Stairs 9.5” x 8.5”
1520 Exit, RMan Left, Up Stairs 9.5” x 8.5”
1521 Exit, RMan Right Diagonal, Up Stairs 9.5” x 8.5”
1522 Exit, RMan Right Diagonal, Up Stairs 9.5” x 8.5”
1523 Exit, RMan Right Diagonal, Down Stairs 9.5” x 8.5”
1524 Exit, RMan Left Diagonal, Down Stairs 9.5” x 8.5”
1545 Exit, RMan Right, Right Arrow 5.25” x 13.5”
1546 Exit, RMan Left, Left Arrow 5.25” x 13.5”
1547 Exit, RMan Right, Down 5.25” x 13.5”
1548 Exit, RMan Left, Down 5.25” x 13.5”
1549 Exit, RMan Right Arrow, Up 5.25” x 13.5”
1550 Exit, RMan Left Arrow, Up 5.25” x 13.5”
1551 Exit, RMan Right, Diagonal Up 5.25” x 13.5”
1552 Exit, RMan Left, Diagonal Up 5.25” x 13.5”
1553 Exit, RMan Right, Diagonal Down 5.25” x 13.5”
1554 Exit, RMan Left, Diagonal Down 5.25” x 13.5”
1529 Door Handle Marking RMan Left 5” x 11”
1530 Door handle Marking RMan Right 5” x 11”
1531 Panic Bar Marking 2” x 22”
vMax™ UL-924 Exit Signs
Item # Stroke Dimensions Chevron Colors
1005-1 6”H x ¾” 9¾” x 17” Arrow Kit 1005-01 Red
1005-2 6”H x ¾” 9¾” x 17” Arrow Kit 1005-02 Green
1005-3 6”H x ¾” 9¾” x 17” Arrow Kit 1005-03 BlackFramed exit signs for high and low Level applications
50’ rated
Code compliant
Non-electric
25+ years life expectancy
TRENCH & ACCESS COVERS
STAIRNOSINGS
INTERIOR EXPANSIONJOINT COVERS
GRATES & FRAMES
EXTERIOR EXPANSIONJOINT COVERS
FLOOR GRIDS& MATS
uality products engineered and crafted to meet tomorrow’s needs today... Over 50 years in the business is proof that we stand behind those words. Balco has set an industry benchmark with our combination of highly skilled engineers, manufacturing processes, and drafting designs. We customize our products to fit your projects’ needs. At Balco, we’re dedicated to bringing you the highest quality products at competitive prices. Let us be an integral part of your next project.
Other BALCO Products
QQBa
l Sw
eet P
L/ 0
809©
www.balcousa.com
Qwest Field is a stadium built for football and soccer located in Seattle, Washington. It serves as the home field for the NFL’s Seattle Seahawks and men’s and women’s Seattle Sounders soccer teams.