SafeProCatalogV21162014

1357 N Walton Walker, Dallas, TX 75211 www.safeprosafety.com (877) 723-3570

SafePro The Market Leader in Rooftop Fall Protection

TM

HandsFree Power Hatch LiftRoof Hatch Safety Rails

Perimeter / Edge Rail SystemsRoof Hatches

Roof Hatch Safety Rails

OSHA Compliant, 360° Guard Rails are Guaranteed to Last for 20 Years

Self-Closing Gate Doubles as a Built-In Extension to the Ladder

Save on Installation Cost: Attach 4 Steel Sides to Any Hatch Size/Brand

U.S. Patent Number: 5,726,577

CONTACT US TODAY FOR A FREE QUOTE! 877.723.3570WWW.SAFEPROSAFETY.COM

Ability to Customize and Retro-Fit to any Hatch

Roof Hatch Safety Rail wtih Ladder Extension is a 4-Sided Rail System with ergonomic hand grip side rails, a self-closing gate with no pinch hinges, and integrated ladder extension rails that will hold steady in the event of a slip during ladder use that

comply with OSHA Standards. SafePro’s steel system is the strongest rail on the market, load tested over 1000 pounds. The rails are galvanized or powder coated smooth with no joints or fittings to snag clothing, as well as no chains or latches to operate.

Standard Sizes

SP 30” x 36” LSP 36” x 36” LSP 30” x 54” LSP 48” x 48” LSP 30” x 96” L

2

Roof Hatch Safety RailsData Sheet

Product Description: Roof Hatch Fall Protection Safety Rail System with Ladder Extension by SafePro™ provides an ergonomically correct grip with an upright egress and ingress through roof hatches in addition to protection from accidental falls through roof opening while roof hatch is open. Includes a wrap around self-closing gate mounted on heavy duty non-pinch hinges acting as a ladder extension. Meets and exceeds OSHA standard CFR29 1910.23 and CFR 29 1910.27. Railing is 42” high when mounted per instructions on standard cap flashing. Meets and exceeds Cal-OSHA §3212 Floor Openings, Floor Holes and Roofs and §3209 Standard Guidelines.

Product Selection Criteria: For standard 30” x 36” Model SP-3036 and 36” x 36” Model SP-3636 (in stock) and all/any other sizes (custom built) hatches with hatchway ladder mounted on opposite hatch hinge lid.

Type of Installation: New or retrofit permanent bolt on mounting of right and left handed integrated, prefabricated horizontal mounting rails, ergonomic forward protruding stanchions, guard railings, mid rail sections and rear stanchions and quick hang gravity gate as per supplied installation instructions and mounting hardware.

Materials:

Mounting System: Integrated stanchions, no fittings. Mounting holes predrilled for 3/8” diameter through bolts. Rail is mounted to extended cap flashing holes per SafePro Installation Instructions.

Tubing: 1 ½” OD .083 wall hot-rolled electric welded (HREW) steel.

Finish: Galvanized or powder-coated safety yellow; other colors available on request.

Gate System: Gravity self-closing with spring assist, non-collapsible full wrap-around 1 ½” tubing grab hold (welded – no fittings). Heavy duty hinges with 5/8” hinge pin with built-in pinch-less gate stop and pull up full opening positioning. Wraps around forward protruding ergonomic hand grip stanchions. Hinged on left side – standard; right hand swing open – special order.

Back Cross Support Rail: Standard equipment 1 ½” steel tubing (HREW) smooth saddle joint bolt-on with 3/8” x 3” bolts and 3/8” tubing connector nuts. ASTM 316 SS

Tube Terminal End Plugs: UV resistant Low Density Polyethylene (LDPE). Head Diameter 1.5 in; plug length 0.511 in, fits cleanly at tube ends keeping out water, pests and debris.

Bolts and Washers: ASTM 316 Grade Stainless Steel hex head bolts 3/8” x 2 ½”, nylon locking hex nut, flat washers for counter flashing and outside mounting rail. NOTE: 316 Grade Stainless Steel (Marine grade) offers the highest corrosion resistance available for construction fasteners in or near salt water; recommended within 5 land miles of any salt water body. MIL NAS Military grade available upon request.

Labels: Safety warnings, manufacturer’s identification including patent numbers. Made in the United States.

Installation: SafePro Roof Hatch Safety Rail System and Ladder Extension Installation Instructions included with each system. To reduce liability and insure proper installation SafePro has certified professional installers nationwide.

Warranty: 20 year manufacturer’s parts only. One year limited finish warranty

U.S. Patent Number: 5,726,577

Manufactured by: SafePro™

3

§1910.23(a)(1) require that any hatch, hinged and/or has ladder access, must have either a permanent or removable safety rail. (Fines up to $250k)

§1910.23(a)(2) Every ladderway floor opening or platform shall be guarded by a standard railing with standard toeboard on all exposed sides (except at entrance to opening), with the passage through the railing either provided with a swinging gate or so offset that a person cannot walk directly into the opening.

§1910.23(e) “Railing, toe boards, and cover specifications.”

§1910.23(e)(1) A standard railing shall consist of top rail, intermediate rail, and posts, and shall have a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level. The top rail shall be smooth-surfaced throughout the length of the railing. The intermediate rail shall be approximately halfway between the top rail and the floor, platform, runway, or ramp. The ends of the rails shall not overhang the terminal posts except where such overhang does not constitute a projection hazard.

§1910.23(e)(2) A stair railing shall be of construction similar to a standard railing but the vertical height shall be not more than 34 inches nor less than 30 inches from upper surface of top rail to surface of tread in line with face of riser at forward edge of tread.

§1910.23(e)(3)(ii) For pipe railings, posts and top and intermediate railings shall be at least 1 1/2 inches nominal diameter with posts spaced not more than 8 feet on centers.

§1910.23(e)(5)(ii) The height of handrails shall be not more than 34 inches nor less than 30 inches from upper surface of handrail to surface of tread in line with face of riser or to surface of ramp.

§1910.23(e)(5)(iv) The mounting of handrails shall be such that the completed structure is capable of withstanding a load of at least 200 pounds applied in any direction at any point on the rail.

OSHA Compliance Facts

4

MATERIALS Steel FRP (Fiberglass) Steel Steel & Aluminum

UNIVERSAL FIT Any Hatch & Size Cap-Flashing Required

4 Sizes Cap Flashing Required

360° DESIGN 4 Sides = Rigid 3 Sides 4 Sides 2 Side + Chain

SIMPLE INSTALL 4 Sides & 10 Bolts20 year warranty

150+ Parts 20+ Parts 30+ Parts

EASY EXIT(Safe & OSHA Compliant Climb)

Self-Closing, Ladder Extension

Add $295LadderUP Post

Add $320HatchGripLadder Extension

Add $270Add-On Gate and Ladder Extension

SafePro Roof Hatch Rail Competitor Competitor Competitor

Compare For Yourself

5

Roof Hatch Safety Rail Assessment Form

Project Name Project Address

I. HATCH INFORMATION

II. VISUAL ORIENTATION

Hatch Manufacturer:Bilco

Babcock-Davis

Dur-Red

Elmdor

Lane-Aire

Milcor

Nystrom

Other:

Hatch Construction:Steel Aluminum

Hatch Condition:New Hatch - Model #

Existing Hatch (Please attach pictures)

If installing on an exhisting hatch, is the hatch able to withstand the 200 lbs. of force required by OSHA standards:

Yes (Current hatch is in good working order)No (Hatch will need replacement

Other Observations:

III. AGREEMENTThe SafePro™ Roof Hatch Assessment Form is required for all orders. A separate form is required for each hatch. All rails are made to specifications and measurements defined above, guaranteed to fit your roof hatch properly if the form is completed correctly. If SafePro™ is found to be in error when manufacturing your rail, SafePro™ will replace or fix the problem at no cost. If you make an error in defining the correct measurements on this form, SafePro™ will remake the rail at your cost. For this reason, SafePro™ recommends you indicate your measurements correctly on this form. By signing this form, you acknowledge and agree to all of the above terms and conditions.

Name, Title Company

Signature Date

”

”

Mark: 1. Place an X on the L to identify ladder 2. Gate hinge with “G” 3. Side A and B measurements4. Ladder Height for RiskPro: ____ft.

Tips: * Measure just above the drip edge where rail will mount* Always hinge gate to open towards roof edge*For stairs rail hinge is typically on hatch hinge side * View measuring video on Youtube

Choose Roof Hatch Rail Finishing:Galvanized Yellow Powder CoatingCustom Color:

A

B

L LL

HandsFree Power Hatch Lift

OSHA / CAL-OSHA compliant

Hands-free open / close / lock / unlock

Retrofit to any size hatch

Restrict unauthorized rooftop access

Track approved users & access duration

Solar-powered features

Integrate with your existing security system


HandsFree Power Hatch Lift is simple and effective for many types of customers, including: Government agencies and data centers to increase perimeter security; Hospitals and schools to eliminate unauthorized rooftop access; Building owners and managers to reduce

liability from accidental falls; Retail companies and warehouses to increase theft protection.

Ability to Install to Any Hatch Access by Remote Control

6

HandsFree Power Hatch LiftData Sheet

Product Description: HandsFree Power Hatch Lift System Standard Options: Solar or 110V by SafePro™ provides fall protection by unlocking/locking and lifting the hatch lid from the safety of ground level providing a safe ladder climb and egress/ ingress through the roof access hatch. The system also provides protection from accidental falls through a roof opening by push button closure of hatch lid, eliminating open hole violations per OSHA Regulation 1910.23. Assists end user with compliance of OSHA CFR 1910.23.

Product Selection Criteria: Fits all brands and a variety of roof hatch sizes with hatchway hinge lid.

Type of Installation: New or retrofit permanent bolt on mounting on hatch curb back wall (hinged side) and hatch cover with turnbuckle connector attached to standard hatch manufacturer’s latching mechanism as per supplied instructions and provided mounting hardware.

Materials:

Mounting System: Bracing back bracket actuator base: heavy duty, hot rolled steel (HREW), 18” x 5” x 3 ½” with pre-bored adjustable mounting slots for 5/16” x 3/4” body bolts painted black finish, repositioning pre-bored pivot holes for 3/8” zinc plated bolt.

Hatch Lid Pivot Bracket Locking Assembly: Hatch Lid Pivot Bracket Locking Assembly: repositioning pre-bored pivot holes and stops for 3/8” actuator pivot pin, pivot plates and 3/8” bolts, zinc plated. Mounted per SafePro’s Installation Instructions.

Finish: Powder-coated black.

Lift System: SafePro™ Hatch Lift Actuator AC/DC permanent magnet motor, 5A interrupt time: 2 min/10 min high-strength housing protecting motor and gears. Built-in limit switches (non-adjustable) CE certified, RoHS compliant.

SafePro™ Solar Power Lift Control Power Supply: 10 Watt maintenance-free solar panel and 12 Volt, 9.0 ah, Sealed Lead Acid battery or SafePro 110V Power Lift Control Power Supply with Trickle Charger: Input: AC120Volt/60Hz Output: 12VDC/5A rating OPP: Overpower (overload) Protection Plug Connection: 1-linear actuator and 1 wired keypad/remote with 30’ cable Handheld Wireless Remote Control: Standard Wired Wall Mounted Keypad, Backlit: Standard Wired Wall Mounted Remote Control with (2) proximity cards Color: Black and natural anodized Aluminum

Hardware: Flat washers, emergency release actuator head clevis pin, 3/8” x 16 x 3-1/4” carriage bolts; 3/8” x 16 lock nuts; 5/16” x ¾” body bolts; 5/16” clevis pin, 3/8” cotter pin; nylon spacers; 1/4” x ¾” self-tapping screws; two-hole clevis plate; three-hole pivot plates.

Labels: Safety warnings, manufacturer’s identification including patent numbers. Made in the United States.

Installation: SafePro™ HandsFree Power Hatch Lift System Installation Instructions included with each system. To reduce liability and insure proper installation SafePro™ has certified professional installers nationwide.

Warranty: One year manufacturer’s parts only warranty. One year limited finish warranty.


7

Roof Hatch

Durable Construction: Made to Outlast the Life of Your Rooftop.

Galvanized, 14 Gauge Steel

Locking Feature for Added Security

Compression Springs & Handle for Assisted Open/Close

Pre-Drilled holes for simple install of Roof Hatch Safety Rails

Pre-Installed HandsFree Automatic Hatch Available


Roof Hatch provides convenient, cost efficient rooftop access, allowing for ladder and stair access to the roof from the interior of the building. Roof Hatch Access Doors are designed and engineered for use over roof openings and are secured from the base flange to

the roof for durability, safety and ease of installation.

Available Sizes Product ID Frame ID Frame OD Weight30” x 36” SPH3036 30” x 36” 37” x 43” 155 lbs.36” x 36” SPH3636 36” x 36” 43” x 43” 195 lbs.30” x 54” SPH3054 30” x 54” 37” x 61” 233 lbs.48” x 48” SPH4848 48” x 48” 55” x 55” 330 lbs.

Custom Available Upon Request

SPH-C

Dimensions subject to manufacturer’s tolerance of + or - .25”. SafePro™ assumes no responsibility for use of void or suspended data.

8

S E RV I C E S AVA I L A B L E

Technical Support

Installation and Setup

Maintenance

Application Support

Hardware Support

Guaranteed Warranty

Roof HatchData Sheet

Product Description: Provide convenient, cost efficient rooftop access, allowing for ladder and stair access to the roof from the interior of the building. The Roof Hatch is designed and engineered for use over roof openings and are secured from the base flange to the roof for durability, safety and ease of installation.

Curb Construction: Shall be 14 gauge (G90) galvanized steel with durable paintable gray primer finish. It shall be 12” in height with a 3-1/2” wide mounting flange with holes for roof attachment.

Cover: Is 14 gauge (G90) galvanized steel with radius corners for safety and shall be fully welded at the corners for watertight construction.

Latching: Shall include interior handle, exterior handle and provisions for an inside padlock.

Hardware: Shall include an automatic, hold-open arm with vinyl grip and compression springs encased in telescopic tubes for smooth door operation.

Guide Specification: Provide Roof Hatch (specify model number and options), manufactured by SafePro™. Roof Hatch shall be fabricated from 14 gauge (G90) galvanized steel on both hatch cover as well as the liner. For smooth operation of the cover, provide compression springs encased in zinc-plated telescopic tubes. Furnish an automatic hold-open arm with vinyl grip. For safety and added security, latching shall include both interior and exterior handles with provisions for an inside padlock.

Warranty: 5 year manufacturer’s warranty.


9

Bundled Options


Safety Hatch HandsFree Hatch RiskPro Premium

A + B + C+ Pre-Assembled + Extended Warranty

A + B + Pre-Assembled + Extended Warranty

SafePro™ offers discounted Bundled Packages

A B C

A + C

SafeGuard Starter Bundle(10) 10’ Railings + 11 Bases

(all hardware included)

SAVE $100

SAVE $500

SAVE $1000

RiskPro

B + CSAVE $300

SAVE $500

Roof Hatch HandsFree Power Hatch Lift Roof Hatch Safety Rail

10

RiskPro

RiskProCombination for a High-Risk Hatch Solution

Roof Hatch Safety RailsOSHA Compliant, 360° Guard Rails are Guaranteed to Last for 20 YearsSelf-Closing Gate Doubles as a Built-In Extension to the LadderSave on Installation Cost: Attach 4 Steel Sides to Any Hatch Size/Brand

HandsFree Power Hatch LiftOSHA / CAL-OSHA compliantAttach to any size hatch to automatically open/close and lock/unlockRestrict unauthorized rooftop accessTrack approved users & access duration with magnetic card readerSolar-powered option features integrate with your existing security system


RiskPro Roof Hatch Fall Protection System combines both the HandsFree Power Hatch Lift (Fall Protection) System and the Roof Hatch Safety Rail with Integrated Ladder Extension System into one complete solution.

Ability to Install to Any Size HatchWireless Remote and Keypad Access

11

SafeGuard

10’, 8’, 6’ & 4’ Steel Rails & Weighted Bases/Non-Penetrating Protection

Multi-Purpose Configurations: Short/Long-Term, Indoor/Outdoor Usage

Exceeds OSHA Standards/Saves Time & Cost v. Other Safety Precautions

Standard Colors: Galvanized or Safety Yellow Powder-coat

SafeGuard serves as a temporary hazard barricade during rooftop construction or for long term applications. Ballasted, Non-Penetrating Steel Bases are built to last and will not void existing rooftop warranty. SafeGuard can be configured as a 4-sided

structure to guard skylights and other rooftop fall hazards, open holes, or ground-level for multiple uses.

Available in 10’, 8’, 6’ & 4’ Sections Bases with Locking Pin


12

SafeGuardData Sheet

Product Description: Guard rail system by SafePro™ provides strength and stability for rooftop protection. SafeGuard system assembled is compliant with OSHA CFR 1926, OSHA CFR 1910.23, and Cal-OSHA 3212 & 3209 standards to meet and exceed minimum strength and stability requirements.

Application: Serves as a temporary hazard barricade during rooftop construction or for long term applications. Ballasted, Non-Penetrating steel design is constructed to last and will not void existing rooftop warranty. Can be configured as a 4-sided structure to guard skylights and other rooftop fall hazards, roof edge or ground-level for multiple uses.

Product Selection Criteria: Free Standing 10’,8’,6’ and 4’ guard rails, all or any size come with ballasted base and pins for installation. Non-penetrating guard rail systems are composed of 1.5” OD diameter round steel tube railing sections and are attached to weighted steel bases. Assembled, the system measures nominally 42” in height with a single mid-rail at mid-height.

Materials: A. Guard Rails available in 10’,8’,6’ and 4’ sections and are composed of 1.5” OD .083 wall galvanized or powder-coated steel tubing. Assembled, the system measures nominally 42” in height with a single mid-rail at mid-height to meet and/or exceed minimum strength requirements for compliance with OSHA 1926, OSHA 1910.23, and Cal-OSHA 3212 & 3209 standards. B. Base weighs 90 lbs. i. .5” powder-coated or galvanized steel ii. Measures 20” x 20” iii. Two (2) .5” diameter steel carrying handles for easy transportation iv. Two (2) extensions rods for attachment to rails measuring 5.5” in length / tall and 1.0625” in diameter with .5” predrilled holes to securely attach rails to base using two (2) .25” locking pins

Installation: Railing sections are joined together by sliding directly onto steel base extension rods for easy set up and break down for use on either permanent or short term configurations. Instructions included. SafePro™ reccommends the use of toe boards and outriggers for stability safety.

Finish: Galvanized or Powder-coated safety yellow; other colors available upon request.

Warranty: 20 year manufacturer’s parts only on permanent installations. One year limited finish warranty. For applicable opportunities and details visit www.safeprosafety.com or contact SafePro™ at 877.723.3570

Manufactured by: SafePro™. Engineer Tested. Official Document available upon request.

13

High Risk Hatches

When to Consider a HandsFree Power Hatch Lift:High Risk Hatches require HandsFree solutions: Automatic Open, Close & Lock Hatch before ascending ladder.

Hatch LocationLightingAccess Issues

No CageOver 11 feetImpeded or interruptedNo Hassle with padlock

Hatch Ladder Access

Rooftop Security

Theft by accessChildren accessHigh level secuirtyPad Lock being used

High Risk Location

High Traffic

Hatches

Access by vendors or employees4 times/ yr = Active Roof

Roof Weather

Conditions

Hatch Size

Sizes over 36” x 36”becomes safety concern

Wind, snow, rain, ice or high temperatures

14

An open hatch should not be considered a safety component, 360 degrees of safety

Safety Rail Considerations

OSHA COMPLIANCE

Legally & Ethically Responsible

Steel / Made to lastWarranty should be at least 20 years to last as long as roofSafety rail should not penetrate flashing or create abnormal wear

MATERIALSOF

CONSTRUCTION

RIGIDITY =

SAFETY

Gate becomes an integrated ladder extension (climb-assist)BUILT-IN

EXTENSION TO LADDER

AUTOMATIC SELF-CLOSING GATE

Requires no manual operation ( Chain requires manual operation)Ensures safety - Gate closes automatically

QUICK & EASY INSTALLATION

4 welded steel sides + 10 boltsInstallation Savings

Considerations when choosing a Roof Hatch Safety Rail:

15

CONTACT US

1357 N Walton WalkerDallas, Texas 75211

(877) 723-3570 www.safeprosafety.com

SafePro™ is a national manufacturer of roof top safety and security products designed by roofing experts with 30+ years of experience. Falls from 11+ feet have a 50% survival rate, roof hatch protection is not just an OSHA

requirement, it’s the right thing to do.

Documents

SafeProCatalogV21162014