Upload
duongdien
View
233
Download
0
Embed Size (px)
Citation preview
292
7
Safety Products
Safety Relays
SN0 4062K-A PN0Z X2P PN0Z s3
Type
Safety Category - EN 954 – 1
SIL (IEC 62061 & IEC 61508) —
Safety Applications
Input Circuits
Output Contacts 2 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
2 Safety Contact (N/O) 2 Safety Contact (N/O)
1 Semiconductor (N/C)
Reset AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
Dimensions (HxWxD) 96.5x22.5x114 94x22.5x121 100x17.5x120
Supply Voltage and Order
Number
Voltage Order Number Voltage Order Number Voltage Order Number
24 VAC/DC R1.188.0700.2 24 VAC/DC 777303 24 VDC 750 103
—48....240
VAC/DC
777307
Safety Category 4
In accord with EN 954-1
Safety Category 3
In accord with EN 954-1
Safety Category 2
In accord with EN 954-1
SILcl 3
In accord with EN 61508 & EN 62061
Emergency Stop Monitoring
Protective Gate Monitoring
AOPD-Compatible
Connection of sensors with
semiconductor outputs possible
Single Channel Input Circuit
NC Contact or semiconductor
Two Channel Input Circuit
NC Contacts or semiconductors
AUTO-
RESET
Automatic Reset
After application of the voltage and/or
after safety request
Manual Reset
In the case of a rising edge at the
Reset input after application of the
voltage and/or the safety request
PNPNPNPNPNPNPNPNPNPNPN0ZNE
WNE
W
293
7
Safety Products
SNA 4043 K-A SNO 4083KM-A PN0ZX2.8P PN0Z s4
3 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
3 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
3 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
3 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
1 Semiconductor (N/C)
AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
96.5x22.5x114 96.5x22.5x114 94x22.5x121 100x22.5x120
Voltage Order Number Voltage Order Number 24 VAC/DC 777301 24VDC 750 104
VAC/DC R1.188.1810.0 115-23O VAC R1.188.3590.0
230 VAC R1.188.1840.0 24VDC R1.188.3580.0 24...240 VAC/DC 777302 48....240 VAC/DC 750 134
Reset Button Monitoring
In the case of a falling edge at the
Reset input or dynamic monitoring
after application of the voltage and/or
safety request
Safety Mat Monitoring
Two Hand Control Monitoring
Corresponds to type III C in accord
with EN 574-1
Controlled Stop
Corresponding to stop category 1
Two Hand Control
According to EN 574-1Two Channel input circuit
In each case NC and NO, eg for two
hand control
PNPNPNPNPNPNPNPNPNPNPNPNNEW
NEW
NEW
NEW
294
7
Safety Products
SNA 4044K-A PN0Z X13
Type
Safety Category - EN 954 – 1
SIL (IEC 62061 & IEC 61508)
Safety Functions
Input Circuits
Output Contacts 4 Safety Contacts (N/O) 5 Safety Contact (N/O)
1 Auxiliary Contact (N/C)
Reset AUTO-
RESET
AUTO-
RESET
Dimensions (HxWxD) 96.5x22.5x114 87x45x121
Supply Voltage and
Order Number
24 VDC/AC R1.188.1860.0 24 VDC 774549
230 VAC R1.188.1840.0 — —
Safety Category 4
In accord with EN 954-1
Safety Category 3
In accord with EN 954-1
Safety Category 2
In accord with EN 954-1
SILcl 3
In accord with EN 61508 & EN 62061
Emergency Stop Monitoring
Protective Gate Monitoring
AOPD-Compatible
Connection of sensors with
semiconductor outputs possible
Single Channel Input Circuit
NC Contact or semiconductor
Two Channel Input Circuit
NC Contacts or semiconductors
AUTO-
RESET
Automatic Reset
After application of the voltage and/or
after safety request
Manual Reset
In the case of a rising edge at the
Reset input after application of the
voltage and/or the safety request
Safety Mat Relays
295
7
Safety Products
SNV 4076SL-A PN0Z X9P SNO 4063KM-A PNOZ 16
—
3 Instantaneous Contacts (N/O)
1 Aux Instantaneous Contacts (N/C)
3 Delayed Safety Contact (N/O)
7 Safety Contacts (N/O)
2 Auxiliary Contact (N/C)
2 Semiconductor (N/C)
3 Safety Contacts (N/O) 3 Safety Contacts (N/O)
AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
96.5x 45x114 101x90x121 96.5x22.5x114 87x45x121
24 VDC
(0-3 sec)
R1.188.2130.0 24 VDC/AC 777609 24 VDC R1.188.1280.0 24 VAC/DC 774060
115-230 VAC
(0-3 sec)
R1.188.2220.0 24 VDC /100-
240 VAC
777606 — — — —
Reset Button Monitoring
In the case of a falling edge at the Reset input or dynamic monitoring
after application of the voltage and/or safety request
Safety Mat Monitoring
Two Hand Control Monitoring
Corresponds to type III C in accord with EN 574-1
Controlled Stop
Corresponding to stop category 1
Two Hand Control
According to EN 574-1
Two Channel input circuit
In each case NC and NO, eg for two
hand control
296
7
Safety Products
Time Delay Relays
Safety Category 4
In accord with EN 954-1
Safety Category 3
In accord with EN 954-1
Safety Category 2
In accord with EN 954-1
SILcl 3
In accord with EN 61508 & EN 62061
Emergency Stop Monitoring
Protective Gate Monitoring
AOPD-Compatible
Connection of sensors with
semiconductor outputs possible
Single Channel Input Circuit
NC Contact or semiconductor
Two Channel Input Circuit
NC Contacts or semiconductors
AUTO-
RESET
Automatic Reset
After application of the voltage and/or after
safety request
Manual Reset
In the case of a rising edge at the Reset
input after application of the voltage and/or
the safety request
SNV 4063KL-A PN0Z s5
Type
Safety Category (EN 954-1)
SIL (IEC 62061 & IEC 61508) —
Safety Functions
Input Circuits
Output Contacts 2 Instantaneous Contacts (N/O)
1 Delayed Safety Contact (N/O)
2 Instantaneous Contacts (N/O)
2 Delayed Contacts (N/O)
Reset AUTO-
RESET
AUTO-
RESET
Dimensions (HxWxD) 96.5x22.5x114 100x22.5x120
Supply Voltage and
Order Number
24 VDC
(0.15 -3 Sec)
R1.188.0620.0 24 VDC
(Selectable Time Delay)
750 105
24 VDC
(1.5-30 Sec)
R1.188.0640.0 48 240 VAC/DC
(SelectableTime Delay)
750135
NEW
NEW
297
7
Safety Products
Two Hand Relays
Reset Button Monitoring
In the case of a falling edge at the Reset input or dynamic monitoring after
application of the voltage and/or safety request
Safety Mat Monitoring
Two Hand Control Monitoring
Corresponds to type III C in accord with EN 574-1
Controlled Stop
Corresponding to stop category 1
Two Hand Control
According to EN 574-1
Two Channel input circuit
In each case NC and NO, eg for two hand control
NEW
NEW
SNZ 4052 K-A PN0Z s6
—
2 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
3 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
1 S/C Output (N/C)
AUTO-
RESET
AUTO-
RESET
96.5x22.5x114 100x22.5x120
24 VDC/AC R1.188.0530.1 24 VDC 750 106
230 VAC R1.188.0930.1 48 240 VAC/DC 750136
NEW
NNNNNNNNNEW
NNNNNNNNNNNEEW
NEW
NEW
298
7
Safety Products
Expander Modules
SNE 4004K-A PZE X4P PNOZ s7
Type
Safety Category (EN 954-1)
SIL (IEC 62061 & IEC 61508)
Input Circuits
Output Contacts 4 Safety Contacts (N/O)
3 Auxiliary Contacts (N/C)
4 Safety Contacts (N/O) 4 Safety Contacts (N/O)
1 Auxiliary Contacts (N/C)
Reset Depending On Base Unit Depending On Base
Unit
Depending On Base Unit
Dimensions (HxWxD) 96.5x22.5x114 94x22.5x122 100x17.5x120
Supply Voltage and Order Number 24 VDC R1.188.0590.0 24 VDC 777585 24 VDC 750107
Depending On
Base Unit
Depending On
Base Unit
Depending On
Base Unit
Safety Category 4
In accord with EN 954-1
Safety Category 3
In accord with EN 954-1
Safety Category 2
In accord with EN 954-1
SILcl 3
In accord with EN 61508 & EN 62061
Emergency Stop Monitoring
Protective Gate Monitoring
AOPD-Compatible
Connection of sensors with
semiconductor outputs possible
Single Channel Input Circuit
NC Contact or semiconductor
Two Channel Input Circuit
NC Contacts or semiconductors
AUTO-
RESET
Automatic Reset
After application of the voltage and/or
after safety request
Manual Reset
In the case of a rising edge at the
Reset input after application of the
voltage and/or the safety request
NEW
NEW
299
7
Safety Products
SNE4008S-A PZE9P PNOZ s11
Depending On
Base Unit
Depending On
Base Unit
8 Safety Contacts (N/O)
4 Auxiliary Contacts (N/C)
8 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
8 Safety Contacts (N/O)
1 Auxiliary Contact (N/C)
Depending On Base Unit Depending On Base Unit Depending On Base Unit
96.5x45x114 87x90x121 100x45x120
24 VDC/AC R1.188.1300.0 24 VDC/AC 777140 24VDC 750111
Depending On
Base Unit
Reset Button Monitoring
In the case of a falling edge at the Reset input or dynamic monitoring after
application of the voltage and/or safety request
Safety Mat Monitoring
Two Hand Control Monitoring
Corresponds to type III C in accord with EN 574-1
Controlled Stop
Corresponding to stop category 1
Two Hand Control
According to EN 574-1
Two Channel input circuit
In each case NC and NO, eg for two hand control
NEW
NEW
300
7
Safety Products
Pnoz Multi
PNOZ m1p/m0p PNOZ mm0p
Type
Range of use Base unit –
From 4 safety functions and for standard control
functions
From 4 safety functions and for standard control
functions
Application range In accordance with EN 954-1, Category 2, 3 or 4:
E-STOP, two-hand buttons, safety gate, light
curtain, scanner, enable switch, PSEN safety gate
switch, operating mode selector switch.
In accordance with EN 954-1, Category 2, 3 or 4:
E-STOP, two-hand buttons, safety gate, light
curtain, scanner, enable switch, PSEN safety gate
switch, operating mode selector switch.
Inputs/Outputs 20 freely configurable inputs
4 test pulse outputs
1 auxiliary output
Outputs using s/c technology:
- Category 4: 2 safety outputs
- Category 3: 4 safety outputs
Relay outputs:
- Category 4: 1 safety output
- Category 2: 2 safety contacts
20 freely configurable inputs
4 test pulse outputs
Outputs using s/c technology:
- Category 4: 4 semiconductor outputs
Supply voltage(UB) 24 VDC 24 VDC
Utilisation Category Outputs using s/c technology
24 VDC, 2A max or 48W
Relay outputs: DC 24V, 6 A
Outputs using s/c technology
24 VDC, 2A max or 48W
Dimensions (HxWxD) 101x22.5x121 101x45x120
Features • Configurable using PNOZ multi Configurator
via chip card or RS 232 interface
• Exchangeable program memory
• Diagnostic interface
• Fieldbus modules can be connected and
Max. 8 expansion modules can be connected
on PNOZ m1p
• Fieldbus modules can be connected but no
expansion modules can be connected on
PNOZ m0p
• Configurable using PNOZ multi Configurator
via USB
• Exchangeable program memory
• Diagnostic interface
• Fieldbus modules can be connected and
Max. 8 expansion modules can be connected
on PNOZ m1p
• Fieldbus modules can be connected but no
expansion modules can be connected on
PNOZ mm0p
Order Numbers(Excl.terminals)
PNOZ m1p-(serial)
PNOZ m0p
PNOZ m1p-ETH
773 100
773 110
773 103
PNOZ mm0p 772 000
Plug in Screw Terminals 1 set 793 100 1 set 750 008
— — Mini USB Cable3 m ...... 312 992
5 m ...... 212 913
NEW
NEW
301
7
Safety Products
PNOZ mo4p PNOZ mc1p PNOZ ms2p PNOZ MULTI TOOLKIT
Safe input module Safe relay output module Safe speed and standstill
monitoring module
The Toolkit contains the accessories you
need to start working with PNOZ multi:
• Documentation folder with the PNOZ
Multi Configurator
• Chip card reader to write and save
the configuration onto a chip card
• Chip card set consisting of 10 chip
cards, including a chip card adapter
for rewriting cips removed from the
chip card.
• Configuration cable for reading
diagnostic data.
Accessories:
• Chip card reader... 779230
• Chip card set....... 779200
• Configuration cable.. 310300
• Documentation folder
• with Pnoz multi configurator
• on CD ROM.............773000
• PNOZ mc8p Ethernet 773730
• PNOZ mc9p Profinet 773731
• PNOZ mc4p Devicenet 773711
In accordance with EN 954-1,
Category 2, 3 or 4; E-STOP,
two-hand buttons, safety gate,
light curtain, scanner, enable
switch, PSEN safety gate switch,
operating mode selector switch
In accordance with EN
954-1,
Category 2, 3 or 4:
Volt-free switching of actua-
tors
In accordance with EN 954-1, Cat.
3: For speed and standstill moni-
toring via incremental encoders or
proximity detectors.
8 safe inputs Relay outputs:
- Category 4: 2 safety
outputs
- Category 2: 4 safety
outputs —
24 VDC 24 VDC 24 VDC
DC 24 VDC/6 A 24 VDC/6 A
94x22.5x121mm 94x 2.5x121 mm 94x45x121 mm
Max. 8 input modules can be
connected to the base unit.
Connected to base unit via a
link on the back on the unit.
Max. 6 relay output modules
can be connected to the
base unit.
Connected to base unit via a
link on the back of the unit
Up to 8 limit values can be configured
using the PNOZmulti Configurator
Proximity detectors are connected directly
to the terminals on the PNOZ ms2p
Incremental encorders are connected via
a connection cable.
PNOZ msi1p,
25/25 Si/Ha 2.5 m …… 773 850
Pnoz mis10P
Adaptor cable 2.5 m...773854
Additional versions on request
PNOZ mi1p 773 400 PNOZ mo4p 773 536 PNOZ ms2p
Excl terminals
Screw terminals
.... 773 810
.... 793 800
PNOZ Multi toolkit 779 000
1 set 793 400 1 set 793 536 Pnoz ms1P
Excl terminals
773 800 Single user
license
773 010B
— — — — Screw terminals 793 800 —
302302
samos ® PRO consists of the safe SP-SCON controller with integrated programing/diagnostic interface and a series
of safe SP-SDIO or SP-DI I/O modules.
Appropriate gateways permit communication with !eldbuses or Ethernet networks.
Programming is simple and intuitive with thte graphic programming using interface samos® PLAN using a wide variety of
safe function blocks. An exchangeable program memory (samos® MEMORY) is all part of the system.
samos® PRO fulfills category 4 (EN954-1), Performance Level PL e ISO 13849-1 SIL 3 (EN62061).
Samos Pro
Upto 4 samos ® PRO systems can be connected with samos ® NET System
• 100 metres of network
• 384 safe inputs
• 192 safe outputs
303
7
Safety Products
samos® PLAN provides the user with a
convenient graphics programing interface
for samos® PRO
Con!guration and parameterisation of
inputs and outputs is completely free.
samos® PLAN - the programing tool of
samos® PRO
• Intuitive, graphic user interface
• Safe, certi!ed function blocks
• Simple I/O con!guration and
parameterisation
• Simulation and online diagnostics
• Runs under Windows XP, Vista
samos® PLAN - offers the user many safe, practice oriented function
blocks. For example:
• Emergency stop functions
• Protective door and locking functions
• Light barrrier and light curtain functions
• Muting functions
• Two-hand and press functions
• Logic functions
• Timer and counter functions
• Operating mode switch
EASY configuration - using
Drag & Drop Safety devices
304
7
Safety Products
Samos Pro
SP-SCON-P1-K SP-SDIO84-P1-K-A
Range of use From 4 Safety functions Safe 8 Inputs, 4 Outputs module
Application range In accordance with AS4024-2006, Cat-
egory2,3 or 4: Estop, two-hand buttons, safety
gate, light curtain, scanner, enable switch,
operating mode selector switch
In accordance with AS4024-2006, Catego-
ry2,3 or 4: Estop, two-hand buttons, safety
gate, light curtain, scanner, enable switch,
operating mode selector switch
Inputs/OutputsCPU
• 8 Safe Inputs
• 2 Test Pulsing Outputs (X1,X2)
• 4 Semiconductor Safe Outputs rated at
24VDC, 2 Amps
Supply voltage(UB) 24 VDC 24 VDC
Utilisation Category — • Inputs 15VDC -30 VDC at 3 mA.
• Outputs 24VDC at 2 Amp
Dimension (H x W x D)mm 96.5 x 22.5 x 114 96.5 x 22.5 x 114
Features • Configurable using SAMOS Plan Configura-
tor via RS 232 interface
• Exchangeable program memory
• Diagnostic Interface
• Fieldbus codules can be connected and
maximum of 12 expansion modules can be
connected.
• Max of 12 modules can be connected to
the CPU.
• Connected to CPU via safetybus on the
side.
Order Number Part Number Order Number Part Number Order Number
SP-SCON-P1-K R1.190.0010.0 SP-DIO84-P1-K-A R1.190.0030.0
SP-SCON-NET-P1-K R1.190.0020.0
SP-Memory R1.190.0080.0
SP-Cable1 R1.190.0090.0
(Connection Cable-
M8)
SP-Cable 3
(Can Cable 1 metre)
00.102.5202.0
NEW
NEW
NEW
NEW
305
7
Safety Products
SP-SDI8-P1-K-A SA-OR-S1-4RK-A Fieldbus Gateways
Safe Input Module Safe Relay Output Module Fieldbus Gateways
In accordance with AS4024-2006, Category 2,3
or 4: Estop, two-hand buttons, safety gate, light
curtain, scanner, enable switch, operating mode
selector switch
In accordance with AS4024-2006, Category
2,3 or 4: Volt-free Switching of actuators
Profibus DP. CANopen, Devicenet, Ethernet
communication
• 8 Safe Inputs
• 2 Test Pulsing Outputs (X1,X2)
• 2 x 2 Safe Relay outputs AC230V/6A
• 2 x 1 positively driven NC contact for feed-
back circuits—
24 VDC 24 VDC 24 VDC
• Inputs 15VDC -30 VDC at 3 mA. • 2 x 2 Relay Outputs 240VAC/6A —
96.5 x 22.5 x 114 96.5 x 22.5 x 114 96.5 x 22.5 x 114
• Max of 12 modules can be connected to the
CPU.
• Connected to CPU via safetybus on the side.
• Use of 1 Semiconductor output from SP-
SDIO84 to enable 1 set of Relay output as
per Cat 4
• Profibus-DP
• CANopen
• DeviceNet
• Ethernet Modbus/TCP
• Ethernet/IP
• Ethernet/Profinet
Part Number Order Number Part Number Order Number Part Number Order Number
SP-DI8-P1-K-A R1.190.0050.0 SA-OR-S1-4RK-A R1.180.0080.0 SP-CANopen R1.190.0210.0
SP-Devicenet R1.190.0230.0
SP-PROFIBUS-DP R1.190.0190.0
SP-EN-MOD R1.190.0130.0
SP-EN-IP R1.190.0150.0
SP-EN-PN R1.190.0140.0
NEW
NEW
NEW
NEW
NEW
NEW
306
7
Safety Products
Safe Standstill / Timer Relays
PSWZ XIP (Standstill Monitor)
SNS 4084K-A SNV 4063 KP-A (Safe on Delay)
SNO 4003K-A SNT 4M63K-A
Type
Safety Category
- In accordance
with EN 954 – 1
SIL (IEC 62061
& IEC 61508)— — —
Safety
Functions
Standstill Monitoring
(Back EMF
For single and three
phase motors
No additional
components required)
Standstill monitoring
and/or low speed
monitoring
Input Circuits Single Channel
Dual Channel
2 x inductive proximity
switches or 1 x
incremental encoder
with HTL outputs
Output
Contacts
2 Safety Contacts
(N/O)
1 Auxillary (N/C)
4 semiconductor
outputs
2 Instantaneous
Contacts (N/O)
1 Delayed Contacts
(N/O)
3 Safety Contacts
(N/O)
1 Auxiliary Contact
(N/C)
3 Safety Contacts
(N/O)
Reset
AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
AUTO-
RESET
Dimensions
(HxWxD) 94x45x122mm 96.5x22.5x114mm 96.5x22.5x114mm 96.5x22.5x114mm 94x22.5x121
Supply Voltage
Part Numbers
24...240
VAC/DC
777950 24 VDC
(16.8-30
VDC)
R1.188.3480.0
(0.5-99 Hz)24 VDC(0.15-3
sec)
R1.188.0660.0 24 VAC/
DC
R1.188.0500.1 24 VAC/
DC
R1.188.1050.0
—
R1.188.3660.0
(0.1-9.9 Hz)24 VDC
(1.5-30
sec)
R1.188.0680.0 230
VAC
R1.188.0910.1 230
VAC
R1.188.1040.0
— — — — — —
NEW
NEW
NEW
NEW