Upload
others
View
19
Download
0
Embed Size (px)
Citation preview
Specifications
No investment costsSartovent eliminates the need for conven-tional stainless steel housings with filter ele-ments. Why? Sartovent is an all-in-one unitmade of plastic – unbeatably affordable.
Tamper-proofSartovent is lead-sealed to the tank to pre-vent unauthorized removal that may gounnoticed.
Practical designThe air inlet and outlet openings are configured to ensure optimum flow geometryin the filter medium. The integrated splashguard prevents premature blockage of themembrane by stopping liquid from splashingthe pleated filter material, especially duringtransportation of containers.
Convenient label for 100% traceabilitySartovent’s convenient label has numberedsquares representing the calendar weeks so you can keep track of its initial use by marking the appropriate square. Moreover, just one glance at the label andyou’ll know immediately when Sartovent has to be resterilized or exchanged.
Materials Polypropylene (PP) housingNonwoven PP filtermaterial
Retention rating 0.2 μm, nominal
Connectors Beverage thread acc.to DIN 11.851, DN 25, DN 32, DN 40
Height 80 mm
Outer diameter 110 mm d
Sartovent air filter: maximum filtration reliabilitySartovent is completely made of polypropy-lene. And naturally it won’t affect the taste orodor of your products because it’s approvedby food safety laws.
It ensures that your products will remainmicrobe-free:
– Basic ingredients
– Fruit juices
– Liquid sugar
– Unsweetened must for wine
“Microbe-proof” designThanks to its special construction, Sartoventretains particles and microbes reliably.
Heat stableSartovent can be steam-sterilized whilemounted in place on top of a container or autoclaved separately.
Leaktight fitA few turns with a common hook wrench areall it takes to securely install Sartovent on a tank, thus ensuring a leaktight, secure fit.
Wide selection of beverage threadsSartovent is available in various beveragethread sizes to fit most tanks on the market:DN 25, 32, 40.
Sartovent®
The ideal safeguard for sanitary tanks
Tank
Ven
ting
Sartorius Stedim Biotech GmbHAugust-Spindler-Strasse 1137079 Goettingen, GermanyPhone +49.551.308.0Fax +49.551.308.3289www.sartorius-stedim.com
USA Toll-Free +1.800.368.7178UK +44.1372.737159France +33.442.845600Italy +39.055.63.40.41Spain +34.90.2110935Japan +81.3.3740.5407
Specifications subject to change without notice. Printed and copyrighted by Sartorius Stedim Biotech GmbH | WPublication No.: SG-1017-e11102Order No.: 85030-516-86Ver. 10 | 2011
Notch for hook wrench
Tab for lead sealing
DIN beverage thread
Air inlet opening
Calendar week labeling
Splash guard
Order Information
5521607P25-----B DN 25 Thread
5521607P32-----B DN 32 Thread
5521607P40-----B DN 40 Thread