SAVIOR has all the above Capabilities and More !!

USB Keyboard*

USB Printer*

Inbuilt GPRS +Ethernet + USB HostInbuilt GPRS +Ethernet + USB Host

SAVIOR 8503

SAVIOR 8504

SAVIOR 8505

USB Pen Drive** additional equipment required based on application# 1:N Enrollment at Reader Level

limited to 500 Users

Doesyour Access & Attendance Systemhave the Capability

Doesyour Access & Attendance Systemhave the Capability

#

To select Enrollment method, employee wise ?

At reader level for both 1:1 & 1:N

- At Computer level for both 1:1 & 1:N*

To synchronize 1:N Fingerprint Data base between reader & computer database, avoiding multiple enrollment and hence saving operator / employee time ?

Enroll finger on any reader, transfer to computer database and deploy also, to all other readers.

Enroll finger on computer and deploy to all readers.*

To work even in remote locations without computer ?

Pen Drive data transfer.

GPRS data transfer and fingerprint template deployment.

To choose verification & Identification method employee wise ?

1:1 (with Smart Card)

1:N (without card & without Key entry).

Only Smart Card

To get hard copy Printout at same instant with additional Printer attached ?

To verify whether the employee Fingerprint enrolled is already enrolled in some other name in the database, using additional Licenses ?

To positively identify the person who is taking the benefit (Cash from Cashier, Material from Store etc.) using the Fingerprint enrolled, using additional Licenses ?

Inbuilt Ethernet + USB Host SAVIOR 8403

SAVIOR 8404

SAVIOR 8405

1:1 Verification at SAVIOR Reader Level

1:N Identification at SAVIOR Reader Level

Also known as 1:1 Authentication.Fingerprint of the user is enrolled and stored in the Smart Card using the SAVIOR Reader.When the user is to be verified, the reader picks up the live fingerprint template of the user and verifies it against the fingerprint template stored in the Smart Card. SAVIOR 8403, 8404, 8405 and GPRS enabled 8503, 8504 & 8505 support 1:1 Verification.

In 1:N identification the finger is enrolled using 1:N Reader enrollment or at the Computer Enrollment Station.Fingers Enrolled at Reader Level is transferred to Computer database, to be deployed to other Readers.Fingers Enrolled at Computer Enrollment Station is deployed to all Readers, as required by Operator.When the user is to be verified, the reader picks up the live fingerprint template of the user and Identifies it against 'N' number of fingerprint template stored in the Reader. SAVIOR 8403, 8404, 8405 and GPRS enabled 8503, 8504 & 8505 support 1:N Identification.

1:1 Verification at SAVIOR Computer Application Level

1:N Identification at SAVIOR Computer Application Level

To positively help your Cashier, Stores and other services to identify the person without the card, from his fingerprint to eliminate fraud.To positively identify whether the person who is taking the benefit, is the actual person.When the user is to be verified, the Operator (Cashier, Stores Keeper) select the Employee Name and asks the Employee to place the Finger on SAVIOR FS 100. The result of 1:1 Verification is visible to the Operator on his Computer Screen.SAVIOR dvanced 1:N nrollment, Computer Level dentification & Template eployment Software (AEID Software) gives the facility of 1:1 Verification at Computer Application Level.

A E I D

To Identify a person who is already registered in the computer database with another name, address etc.To Identify a blacklist of users, who should not be allowed to be re-registered.The template is transferred to the computer database which has "N" number of fingerprint templates. The new fingerprint template is searched among the "N" fingerprint templates stored in the database. If a similar template is stored in the database, it is shown in the search.SAVIOR offers standard 1:N Identification in 2 different licences. 1:5000 licence dongle and 1:20,000 licence dongle. Each search takes from few milli seconds to 7 seconds (depends on system specification) for each Database, to throw the duplicate Fingerprints. Multiple Database can be created.SAVIOR dvanced 1:N nrollment, Computer Level dentification & Template eployment Software (AEID Software) gives the facility of 1:N Identification at Computer Application Level.

A E I D

Qu

ali

ty o

f E

nro

llm

en

t v

ers

us

re

qu

ire

me

nt

wit

h d

iffe

ren

tS

AV

IOR

En

roll

me

nt

Pro

ce

ss

(Fig

ure

s a

re n

ot

ab

so

lute

fo

r c

om

pa

ris

on

wit

h o

the

r S

up

pli

ers

)

Req

uir

ed

fo

r 100%

Co

vera

ge o

f 1

:N Id

en

tifi

cati

on

Req

uir

ed

fo

r 100%

Co

vera

ge o

f 1

:N Id

en

tifi

cati

on

1:1

En

rollm

en

tat

Read

er

Level

Re

qu

ire

d f

or

10

0%

Co

ve

rag

e o

f1

:1 V

eri

fic

ati

on

1:N

En

rollm

en

t at

Read

er

Lev

el

1:N

En

rollm

en

t u

sin

g M

SO

300 w

ith

Cen

tral E

nro

llm

en

t

More than 95% Users(limited to 500 Users) can beIdentified by SAVIOR Readerusing 1:N Enrollment atReader Level. The user doesnot have Smart Card.Remaining 5% Users can beon 1:1 technology (withSmart Card or need to beenrolled by MSO 300 atCentral Enrollment Station.

More than 99.5% Users can be Identifiedby SAVIOR Reader using MSO300 withCentral Enrollment Software. The userdoes not require Smart Cards. Remaining0.5% Users can be on 1:1 technology(with Smart Card).

99.99% Users can beverified by SAVIOR Readerusing 1:1 Enrollment atReader Level. The User hasSmart Card based IdentityCard with FingerprintStored in the card

ENROLLMENT OPTIONS

Model

1:1Enroll-ment

atReaderLevel

1:NEnrollment

at Reader Level(Additional Equipment

USB ComputerKeyboard)

1:1 Enrollmentat Computer Level

(Additionalequipment

Customized 7403required)

1:N Enrollmentat Computer Level

(AdditionalequipmentMSO 300required)

8403

8404

8405

8503

8504

8505

Not Recommended above 500 Users

hence not available

Not Recommended above 500 Users

hence not available

1:1 Enrollmentat Reader

Level

1:N Enrollmentat Reader

Level

1:N Enrollmentat Computer

Level

ENROLLMENT SELECTION PROCESS

REQUIREMENTOF CUSTOMER

TYPE OF ENROLLMENTTO BE SELECTED

Identity Card required 1:1 Fingerprint Enrollment at Reader orComputer Level, based on securityLevel required.

No Identity Card required and less than500 Employees on a specific Reader.

1:N Fingerprint Enrollment at Readerlevel from cost point of view.1:N Enrollment at Computer level fromquality point of view

No Identity Card required but more than500 Employees on a specific Reader.

1:N Enrollment at Computer level

SAVIOR FINGERPRINT TERMINOLOGY AND SOLUTIONS

Quality of Enrollment versus requirement with different SAVIOR Enrollment Process(Figures are not absolute for comparison with other Suppliers)

Type ofEnrollment

ProcessStorage ofFingerprintTemplate

Advantages ofthis type of Enrollment

Disadvantages ofthis type of Enrollment

Where touse it

1:1Enrollment

atReaderLevel

Using 'SAVIOR Enrollment Master Card' or through USB Keyboard, the user's 2 Fingers are enrolled on the Reader by placing the 2 Fingers 3 times on the Fingerprint Sensor. The consolidated Fingerprint Template is stored in the Smart Card based Identity Card.

Inside theContactlessSmart Cardbased IdentityCard

1. The same Smart Card can be used as an Identity card.2. Since there is a Smart Card, it can used in

SAVIOR 3000 & 7000 Series Readers in the same premises.

3. Ease of use for operator as the template once stored in the card will work on all 8000 Series readers installed in the premises.

4. Unlimited number of Employees can use a specific Reader.

5. Even low quality Fingers can be enrolled and be verified without error in this type of Fingerprint Enrollment.

6. By using the Fingerprint Bypass function, only the use of smart card is possible. This can be done for specific employee or a specific or group of readers till rolled back.

7. Antipass back facility can be customized.8. Startup of new Readers in same premises is very easy

and fast. All Smart Cards having the Fingerprint Template of the User, will be accepted by the new Reader subject to Negative / Positive Masking.

1. Cost of Smart Card based Identity Card, is added to the cost of the solution.

2. As Fingerprint template of the employee is not available at the computer l e v e l , i s s u a n c e o f duplicate card requires re-enrollment.

1) Whereidentity card is required

2) Where the Fingerprint of the user is damaged or of low quality

3) Where ease of operation for Operator is necessary.

4) Fast startup of Readers is required.

5) Faster clearance of Queue.

Additional equipment required is customized 7403 with customized Enrollment Software. The Enrollment software is modified to transfer the Fingerprint Template Enrolled at Software Level to the Contactless Smart Card based Identity card of the user.

1:1Enrollment

atComputer

Level

1. Gives centralized option for 1:1 enrollment for highly secured distribution of cards with fingerprint template.

2. All advantages of 1:1 enrollment at reader level is applicable.

3. Fingerprint template of the employee is available at card and also at the customized enrollment software.

Cost of solution ishigher than 1:1 at reader leveland 1:N at reader level.

1) W h e r e h i g h l y s e c u r e d distr ibut ion of cards is required with fingerprint template.

2. As Fingerprint template of the e m p l o y e e i s available at the computer level, i s s u a n c e o f dupl icate card does not require re-enrollment .

Inside theContactlessSmart Cardbased IdentityCard and theCustomizedenrollmentsoftware

Inside theSAVIORReaderandtransferredto SAVIOREnrollmentand TemplateManagementSoftwareVer. 2.0onwards.Hencepresent inbothdatabases.

1:NEnrollment

atReaderLevel

Additional equipment USB Computer Keyboard is connected through the USB Host slot of the SAVIOR Reader. After giving password etc, the user's 2 Fingers are enrolled on the Reader by placing Fingers 3 times each on the Fingerprint Sensor. The consolidated Fingerprint Template is stored in the SAVIOR Reader.

1. Cost effective solution as no Smart Card required.2. Cost effective solution as no central Enrollment

required at Computer Level. 3. Fingerprint Template Enrolled for 1:N at Reader

Level gets transferred to Computer, for deployment to other Readers.

1. Central Enrollment at Computer Level with MSO 300 if number of Users is more than 500 users.

2. The User whose Fingerprint is damaged or of low quality could be enrolled using - 1:1 Enrollment process by

issuing Smart Card.- Bypassing the finger option- 1:N Enrollment using Central

Enrollment Software & MSO 300.

3. The Operator needs to transfer the user's Fingerprint template from the Reader to the central database. He has to further deploy the fingerprint template to other readers to make the additional readers accept the users.

C o s t e f f e c t i v e s o l u t i o n f o r organization which has less than 500 users at a single location.

1. Additional equipment required is MSO 300.2. SAVIOR Enrollment & Template Management Ver. 2

enables the Operator to Enroll the Fingers of the Users.

3. Enrollment Process is for 2 Fingers per User. Each Finger is acquired 3 times for creating a single consolidated Fingerprint template.

4. The consolidated template of both fingers is then stored in SAVIOR Enrollment & Template Management Software Database.

5. These templates are ready for deployment to the SAVIOR Readers located at different locations through RS232, Ethernet or GPRS.

6. The Operator can select the pre configured SAVIOR Reader to upload or remove the fingerprint template from the SAVIOR Reader Database.

7. The Operator can assign SAVIOR Readers for Upload & Remove for individual person in a Single process.

8. SAVIOR Enrollment & Template Management Software also gives status of the SAVIOR Reader Database.

1:NEnrollment

atComputer

Level

Cost of solution ishigher than 1:N at reader levelbut cheaper than 1:1 in caseemployee strength is higherthan 500 employees.

Cost effective solution for organization which has more than 500 users at individual reader level.

SAVIOREnrollmentand TemplateManagementSoftwareis used totransfer thefingerprinttemplate tothe SAVIORReader.Hencepresent inboth.

1. Cost effective solution as no Smart Card required.2. Essential in case 1:N Identification at SAVIOR

Computer Application Level is required.3. Essential in case more than 500 users are required

to be enrolled in a single SAVIOR Reader

Can be deactivated by SAVIOR Communication Software Ver. 8.3.0 onwards

Can be deactivated by SAVIOR Communication Software Ver. 8.3.0 onwards.

The Operator can change from 1:1 Verification to 1:N Identification for specific Employee, at any point of time. For shifting, he has to enroll the Finger using the enrollment function at Reader Level or at central location level.The Operator can change from 1:N Identification to 1:1 Verification for specific Employee, at any point of time. For shifting, he has to enroll the Finger Using SAVIOR Reader and Store it in the Smart Card.The Operator can change from 1:1 Verification to Only Smart Card, at any point of time. For shifting, he needs to bypass Fingerprint for specific Employee.A specific Employee can be on 1:1 & 1:N at the same time, if required.A specific Employee can be on Only Smart Card and 1:N at the same time, if required.

ADVANTAGES & DISADVANTAGES OF EACH ENROLLMENT PROCESS WHICH CAN BE ADOPTED BY SAVIOR

FEATURES OF USB KEYBOARD

FEATURES OF USB PRINTER

Password ProtectedPassword can be changed from Keyboard (Max. 8 digit Alphanumeric)Password reset from Communication Software Ver. 8.3.0 onwards1:N Enrollment on Reader1:1 Enrollment on ReaderUSB Pen Drive activate / deactivate (if allowed by computer)USB Pen Drive Data limitUSB Printer activate / deactivate (if allowed by computer)Door / Tripod Access Time configuration from 0.5 to 10 Secs in steps of 0.5 secsChange of IP Address and FAR setting for 84xx & 85xx. APN setting for 85xxDate / Time setting

Hard copy receipt at the time of PunchingUseful for Canteen & loyalty Application

SAMPLE PRINTOUT

STJ12345

07/02/11

AJAY SINGH

09:00:11

STJ23142

07/02/11

VIVEK RAWAT

09:02:45

STJ23233

07/02/11

BALAJI RAO

09:03:10

STJ23467

07/02/11

STJ23048

07/02/11

VIJAY KUMAR

09:04:44

RAM SINGH

09:05:19

SOFTWARE FEATURESSAVIOR

COMMUNICATIONSOFTWARE VER. 8.3

SAVIOR ENROLLMENT &TEMPLATE MANAGEMENT

SOFTWARE VER. 2.0

SAVIORGPRS MANAGEMENTSOFTWARE VER. 1.3

SAVIOR Readers SupportedSAVIOR 84xx, 82xx,70xx, 72xx & 300x

Data Transfer &Masking

SAVIOR 84xx & 82xx

Enrollment

SAVIOR 85xx & 83xx

Data Transfer, Masking& Enrollment

Functionality Supported

Deployment (addition / removal) of Fingerprint Template created by1:N Enrollment at Reader Level, to all selected Readers based on need.

Not Applicable

Not Applicable

Not Applicable

Strong User management with user rights for each menu and sub menu level.

Visual indication of Fingerprint Template Deployment in each Reader withPaycode, Name of User, Quality of Template & Source of Enrollment

Software can interface the data in Oracle Database, SQL Server Database,MS Access Database, Visual Foxpro Database & Text.

Communication Software allow change of IP address, Subnet, Gateway IPof Reader, at Application level.

Not Applicable In addition can change

the Public IP, APN details

The enrollment data can be stored in MS Access 97 onwards / Oracle Ver. 8 onwards /SQL Server Ver. 7 onwards. Database licences are the responsibility of the customer.

Not Applicable

Not Applicable

Not Applicable

Not Applicable

Door Access Time- configurable from 0.5 to 10 Secs, in steps of 0.5 secs

Offline Data Uploading using Pen Drive

Activating / Deactivating any of the following option from Reader1:1 (through Keyboard)1:N (through Keyboard)USB Pen Drive (through Master Card)

l l l

1:1 (through Master Card or Keyboard)USB Printer

l l

Optional - Siren Alarm Time setting for Customized Reader

Synchronization of Fingerprint Template created by 1:N enrollment atReader Level with Central Database

Limited to 8403 Limited to 8503Not Applicable

False Acceptance Rate (FAR) - Tuneable from Level 3 to 5(to get from Reader and to set on Reader)

Not Applicable

Not Applicable Finger Bypass option for individual or all Users using the Reader (because ofHeavy Rain or because bad fingerprint). Needs Smart Card based ID Cards.

Setting of All Masking - Positive (Group / Individual), Negative, Call(for Individual Call Message), Suspend, Personalization Master(to Modify Card No, Name, DOB in Smart Card)

Not Applicable

Visual indication of Readers installed status (unlimited Readers) with lasttransfer time, number of Records transferred etc. with Reader andCommunication channel error detection.

Data transfer of , Date & Time setting, Reader SettingPunched Records

Not Applicable

Not Applicable Only new data, recorded after last data transfer is transferred.This reduces transfer time.

Auto Data transfer can be set as per requirement. Deletion on FIFO basis. Not Applicable

Optional - Automatic Email of data in Text or MS Access Database. Not Applicable

Force Data Download of selected Reader Page Not Applicable

Not Applicable Inbuilt Database allows recall of last list (Removed from Reader) of Positive Card Masking.

Inbuilt Database allows faster uploading, insertion, deletion, downloading andsynchronization of Reader Memory Master & the Communication Software.

Inbuilt Database provides secondary backup of Punching data transferred forlast 60 days even in case of database connectivity error.

Not Applicable

Not Applicable

Not Applicable

Audit trail Reports for last 60 days Not Applicable

Communication Software detects IP presence. Not Applicable

Optional - Emergency Door Control (Open, Close, Default) - Setting to Reader. Not Applicable

Not Applicable Resetting the password of the Reader's External USB Keyboard

Not Applicable Date / Time can be synchronized in all Readers automatically.

TYPEOF

FEATURE

AccessControl

OtherFeatures

USBHost

FingerprintTemplate

Management

General

DataTransfer

andMasking

DatabaseManagement

Communication

1:N Enrollment at Computer Level Using additional equipment MSO 300

Deployment (addition/removal) of Fingerprint Template created by1:N Enrollment with MSO 300, to all /selected Readers based on need.

Not Applicable

Not Applicable

TECHNICAL FEATURES OF SAVIOR SOFTWARES

Customer to provide VTS SIM which has incoming / outgoing calls and SMS deactivated and GPRS activated.It should be a Post Paid SIM.Customer to provide Public IP and APN. The Operator selected should have strong signal at Reader Installation Site.

LED Buzzer indicator - To indicate the Industrial User at Acceptance or Non acceptance of Punching done by the User.Metal Box with Battery backup - for Heavy Industries.Metal Box without Battery backup - for Heavy Industries.Metal Box with Battery backup and Solar backup - for Remote location without electricity.Battery backup - for Reader and EM lock.

Cost of Power Supply & Connection Box is not included in the cost of the Reader.You need to select the Power Supply & Connection Box based on your Application and Model No. you select.

This configuration is for Attendance only. Model 84xx/ 85xx isTCP/IP enabled and if not connected to EM lock , SP-01 is sufficient

Ethernet / RS232 / GPRS SP-01

Ethernet / RS232 / GPRS DS-01This configuration is for Access or for both Attendance. required. SAVIOR Reader can be SAVIOR 3000 or 7000 or 8000 Series.

Access & DS-01 is

RemarksTypeof communication

Power Supply &Connection Box model

to be selected

Power Supply Support requiredfor ( Maximum possible

equipments listed )

1 No 84xx or 85xx

1 or 2 Nos 84xx or 85xx+ EM Lock

Inbuilt SMPS Power Supply Internal Short circuit and over current protection provided. Charging, Over Charge Protection, Deep discharge Protection provided for Battery backup units. Standard length cable provided from Connection Box to Reader- 1.5 Meters, 5 Meters.

COMMON TECHNICAL SPECIFICATION FOR ALL POWER SUPPLY & CONNECTION BOX

Q1. We have 20 locations across India with less than 50 employees and a factory with 2000 employees. What enrollment method should I use?

Q2. One of the location is a construction site with no computer GPRS connectivity or Electricity. Can I record Attendance ?

Q3. Why can we not use 1:N Enrollment on Reader above 500 Users ?

Q4. Why should we transfer Fingerprint Template to a Central Database?

Q5. have used 1:N Enrollment on Reader but some Employees are not getting enrolled, what should I do ?

Q6. The user has cut one or more of his fingers, What is the solution?

Q7. Due to change of season or on account of any other reason, the user's finger has no finger print as old skin has come out and new skin has not came. What is the solution?

Q8. The user's finger has Mehendi or Ink or Grease on the finger. What is the solution?

We

A1. For the 20 locations, use 1:N Enrollment at Reader Level. Transfer the Fingerprint Templates of all 20 locations to your Factory (if possible) for centralized control. You can deploy the Fingerprint in any manner, once it is centralized.

For the Factory, 1:N enrollment at Computer level with MSO 300 is recommended.

A2. Enroll the Users with 1:N Enrollment using USB Keyboard. Transfer the Data using Pen Drive. Use Metal Box with Battery backup and solar Panel to get your Reader working.

A3. Fingerprint Identification (1:N) is based on the difference between the fingers of different users. The probability of similar Fingerprint increase as a number of Users increase. The 1:N Enrollment on Reader is on small size Fingerprint Sensor which does not catch as many Fingerprint features as a big Sensor like MSO 300 picks up. Hence it is more practical to use big Sensor for Users above 500.

A4. You can deploy the Fingerprint in any manner once it is centralized. It can also work as a secondary backup and hence employee need not disturbed for another enrollment in case primary backup is lost.

A5. You can use 1:N Enrollment at Computer Level with MSO 300 or you can issue Smart Card on 1:1 or only on smart Card based on quality of Fingerprint of the user.

A6. SAVIOR 1:1 & 1:N Fingerprint Technology enrolls 2 fingers. If the finger is having simple cut without any bandage, the same finger normally is Identified by SAVIOR Reader as the sensor is trained to ignore simple cuts. In case, finger is bandaged, the user can use the second finger without informing the HR Dept. In case both fingers are damaged, the HR Dept. can enroll some other fingers which are okay OR since SAVIOR Reader can also work with Smart Card, the operator can Flag the Card to accept Attendance with Smart Card and without Fingerprint.

A7. Solution similar to the answer given in A1. Normally all fingers do not have the problem at the same time. Also this problem is limited to few persons for limited time. The thumb rule is that, if the fingerprint lines are visible to your eye, the finger can be enrolled or identified.

A8. If the fingerprint lines are visible to your eye, the finger can be identified. The Mehendi, Grease, Ink, Oil should not dirty the Sensor Window. Any damage, breakage, sabotage or misuse of Fingerprint Sensor during Warranty or AMC will not be entertained.

SEPARATE LEAFLET AVAILABLEFOR THE OPTIONAL ITEMS

Beige Grey BlackIvory White

- - Please note that there may be slight colour variation in the actual product from the above printed pictures - -8503-01-W stands for Model 8503 Ver. 1, RS232, GPRS and Ethernet enabled, Ivory White.

Item Code : 8403-01-WItem Code : 8503-01-W

Item Code : 8403-01-BItem Code : 8503-01-B

Item Code : 8403-01-GItem Code : 8503-01-G

Item Code : 8403-01-KItem Code : 8503-01-K

Input Voltage : 90 to 280 Volts AC 50Hz.Over and under voltage protection provided.PS-01 & SP-01- One 12V 2 Amp Output. DS-01 - Two 12V 2 Amp Output.

Power Supply & Connection Box Selection Guide

FAQ (Frequently Asked Questions) for SAVIOR 1:1 & 1:N Fingerprint Technology

Colour range available on SAVIOR 84xx & 85xx SeriesFingerprint

GPRS Requirement from Customer Optional SAVIOR Items

Models 1:N Identification1:1 Verification

(Requires Contactless Smart Cardbased Identity Card for Verification )

8403

8404

8405

8503

8504

8505

500 users 2 Fingers each

3000 users 2 Fingers each

5000 users 2 Fingers each

500 users 2 Fingers each

3000 users 2 Fingers each

5000 users 2 Fingers each

Unlimited Users

Unlimited Users

Unlimited Users

Unlimited Users

Unlimited Users

Unlimited Users

Due To Continuous Product Development, The Design & Specification Are Subject To Change Without Prior Notice. SAVIOR is the Registered Trademark of STJ Electronics Pvt. Ltd., New Delhi, India

Manufactured by:

STJ ELECTRONICS PVT. LTD.Regd. Office & Works: X-51, Okhla Industrial Area, Phase-2, New Delhi-110 020.

Ph.: +91-11-49816000 (30 Lines) Fax: +91-11-4161 6300Email: sales@saviorstj.com Web: www.saviorstj.com

Authorised Stockist :

� � � � � � � �� � � � � � � � �� � � � � � � � � � �

� � � �

AHMEDABAD BANGALORE BHUBANESHWAR BHOPAL CHANDIGARH CHENNAI COIMBATORE GUWAHATI HARIDWAR HYDERABAD INDORE JAIPUR JALANDHAR JAMSHEDPUR KANPUR KAPOORTHALA KARNAL

KOCHI KOLKATA LUCKNOW LUDHIANA MUMBAI MADURAI NASIK NAGPUR PATNA PUNE RAIPUR ROORKEE RUDRAPUR ROURKELA THIRUVANANTHAPURAM

SALES & SERVICE CENTRES

FINGERPRINT Related Specifications

READER MEMORY Related Specifications

Common Application Specification for 1:1 & 1:N (without Smart Card)

1:1 Smart Card Application Specification

Verification (1:1) & Identification (1:N) Related Specifications

DISPLAY / AUDIO Related Specifications

POWER SUPPLY Related Specifications

l Fingerprint Sensor Type - Thin Optical Sensorl Fingerprint Resolution - 500 dpi @ 8bit per pixell Fingerprint sensor acquisition area - 14mm x 22mml Identification time less than 2 Secs for 90% cases.l False Acceptance Rate (FAR) - Tuneable from Level 3 to 5 from SAVIOR Enrollment & Template Management Software Ver. 2.0l False Rejection Rate (FRR) - Value dependant on FAR Setting and also kind of population. FRR is better with people who perform limited manual labour and have good quality fingerprints than with hard manual labour with damaged fingerprints.l Reader prompts the user to MOVE UP, DOWN, PUT YOUR FINGER PROPERLY, when Finger is placed on Fingerprint Sensor. This reduces chances of finger being rejected.

l Data Memory for Transaction : 8 MB Flash.l Transaction Memory : 1,30,000 Records l For 1:N Record consists of User ID, Date, Time, Error Code, Transfer Flagl For 1:1 Record consists of Card No., UID, Date, Time, Reason Card, Error Code, Transfer Flag.

l Positive User Masking Master - 2000 User ID.l Negative User Masking Master - 1000 User ID.l Call Back Masking Master - 40 User ID with individual message.l Suspend Masking Master - 50 User ID.l Reason Card Supported : For Single (OD, Leave etc.) and Group Reasons (Bus Late, etc.)

l Personalization Master - 100 Card Data (Name, Date of Birth, Card No., Flag for Finger bypass). Data changed at next show of card.l Finger Bypass option at individual User Level.l Greets card holder on Birthday (if date coded in card)l Storage of unique ID Number (SNR / UID No.)

l Display - LCD (16 characters × 2 rows) Alphanumericl LCD Displays DD-MON-YYYY, day of week and H24:MM:SS time format.l LCD Displays Reader IP Address and MAC Address at Power On.l LCD Displays employee name in English if name coded in the card.l Audio / Visual confirmation of card reading.

l Operating Voltage: DC 12V.l Power 84xx - 3.3 Watts, Power 85xx - 4.0 Watts.l Power supply and Connection Box at extra cost based on Application. See Power Supply and Connection Box Section.

BS EN ISO 9001:2008Certificate No.: FM 80372

l Processor : 32 Bit ARM RISC l RTC : Leap year programed

l Ethernet Detection at Reader Levell Standard RS232 Communication Baud Rate : 57600bps-N-8-1.l Standard RS232 Communication limited to 15 meters.

l Door Access Time- configurable from 0.5 to 10 secs, in steps of 0.5 secs through SAVIOR Communication Software Ver. 8.3l Optional - Continuous Beep (If sensor supports) : In case Door opened forcefully or kept open for more than four seconds. l Optional- Emergency Fire Exit Option at Computer Level to Open all / Specific Doors through Communication Software Ver 8.3. l Application and hardware Electronic Interface for Electromagnetic (EM) Locks available in SAVIOR Power Supply and Connection Box.l Application Interface to Tripod, Gate, Turnstile, Electric Strike, Pivot Barriers, Vending Machine, Revolving Door available at free of cost. Hardware Electronic Interface to these equipment at extra cost.

l USB Pen Drive - Format FAT 16. Max. Storage size - 4 GBl USB Pen Drive will be activated with USB Data Transfer Master Card (if allowed by Communication Software).l USB Keyboard - PC compatible.l USB Printer- USB ESC/POS Printer. If allowed by Communication Software.

l GPRS Model has 1 SIM (GSM) Slot inbuilt.l LCD Displays Signal strength of GPRS / GSM.l LCD Displays Reader IP Address, Public Static IP Address, APN and MAC Address at Power On.

l Technology - Mifare / ISO 14443 Type Al Reading Distance - upto 50 mm l Operation type - Read / Write Readerl Cards Supported - 1 KB.l Optional Card Support - 4 KB Desfirel 8 Digit Alphanumeric User ID.l 16 Character User Name.

l Operating Temperature : - 05°C ~ 50°Cl Relative Humidity : 20% ~ 95% (Non Condensing)l Dimensions : 167 mm (L) × 113 mm (W) × 50mm (D) excludes Antenna l Weight of Reader : 84xx - 440 gms, 85xx - 460 gmsl Enclosure : HR (Heat Resistant) & FR (Fire Retardant) Grade ABS

HARDWARE Related Specifications

COMMUNICATION Related Specifications

LOCK, TRIPOD, GATE Interface Related Specifications

USB Host External Devices Support - Specifications (Optional Items)

GPRS Related Specifications

SMART CARD Related Specifications

GENERAL SPECIFICATION

RS232Ethernet(TCP/IP)

GPRSUSBHost

Models

8403

8404

8405

8503

8504

8505

MS

P /

F0

4 /

LM

D /

L8

-02

11

Common Technical Specifications for SAVIOR Fingerprint 84xx & 85xx Series