Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Steel cartsOpen steel carts and accessories
ScanCellcarts
Open steelcarts
Transportcarts
Cabinets Racks Modules
For more information:
www.scanmodul.com
Tab
le o
f co
nte
nts
Page
4789
1011
Open steel carts
General............................................Carts 30/40 and 40/60......................Carts 40/60 and double carts...........Accessories....................................... Accessories....................................
Material properties...............................
3
Please ask for other special brochures:
ScanCell carts - Brochure no. 05-63027ScanCell accessories - Brochure no. 05-64007 Transport carts - Brochure no. 05-65011Cabinets - Brochure no. 05-66019Scanmo racks - Brochure no. 05-67003Modules - Brochure no. 05-62011
Configurate your own cart?
Lightweight and simple distribution trolleys that allow easy access to the modules and a good overview of the contents.
Fitted with 4 swivel wheels.Made of 20x20 mm (3/4”x3/4”) epoxy pow-der coated metal profiles.
Vario supports. Possibility of inserting Vario wheels.
Standard color is light grey.Different colors available.
Designed with care for people who care
Open steel carts
With Scan Modul System there areendlees possibilities for built up a cartspezialized for different apartments.
4
Open steel carts
Op
en s
teel c
art
s
• Lightweight and simply designed, supply/utility carts that allow easy access to and a clear overview of all the contents.
• Equipped with 4 swivel wheels.
• The carts are made of square metal tubing, epoxy covered.
• Standard color is light gray RAL 7035.
• Available in different colors.
• Assorted accessories are available.
• Please be aware of that all modules shown in open steel carts are extra.
“
”
Open steel carts
7
600
400
600
400
5 6
7
3 4
8
600
400
8
7
6
5
4
3
2
1 2
1
10-34809-Cart 30/40 Insertion C4 sets of VARIO supporting railsFor modules 300x400mm (11¾x15¾”) Cart: 521x350xH850mm (20½x13¾x33½”)Wheels: 4 pcs., swivel, dia. 75mm (3”)
10-64809-Cart 60/40 A-2 Insertion B2 sets of VARIO supporting railsFor modules 400x600mm (15¾x235/8”)Cart: 724x445xH850mm (28¾x17½x33½”)Wheels: 4 pcs., swivel, dia. 75mm (3”)
10-64710– Cart 60/40 CBasic frame without supporting railsFor modules 400x600mm (15¾x235/8”)Cart: 724x445xH850mm (28¾x17½x33½”)Wheels: 4 pcs., swivel, dia. 75mm (3”)
10-64818 -Cart 60/40 C-3 Insertion B3 sets of VARIO supporting railsFor modules 400 x 600mm (15¾x235/8”)Cart:724x445xH 850mm (28¾x17½x33½”)Wheels: 4 pcs., swivel, dia. 75mm (3”)
10-64817-Cart 60/40 C-4 Insertion B4 sets of VARIO supporting railsFor modules 400 x 600mm (15¾x235/8”)Cart: 724x445xH850mm (28¾x17½x33½”)Wheels: 4 pcs., swivel, dia. 75mm (3”)
10-34705-Cart Without supporting rails, but mo-dules can be placed in the top and bottom frames. Supporting rails ortelescopic runners can be mounted.Wheels: 4 pcs., swivvel, dia. 75mm (3”)Measurements in mm (inch. see below)
10-64705-Cart Without supporting rails, but mo-dules can be placed in the top and bottom frames. Supporting rails ortelescopic runners can be mounted.Wheels: 4 pcs., swivvel, dia. 75mm (3”)Measurements in mm (inch. see below)
10-64710-Cart Without supporting rails, but mo-dules can be placed in the top and bottom frames. Supporting rails ortelescopic runners can be mounted.Wheels: 4 pcs., swivvel, dia. 75mm (3”)Measurements in mm (inch. see below)
400
300
600
400
Open steel carts
8
60
0
400
5 6
7
3 4
8
600
400
8
7
6
5
4
3
2
1 2
1
13-64857- Cart 60/40 C-6 Insertion B6 sets of VARIO supporting railsFor modules 400x600mm (15¾x235/8”)Cart: 724x445xH1100mm (28¾x17½x43¼”)Wheels: 4 pcs.,swivel, dia.100mm (4”)
10-64730- Cart 60/40 DBasic frame without supporting railsFor modules 400x600mm (15¾x235/8”)Cart: 952x645xH860mm (37½x255
8x35”)Wheels: 4 pcs., swivel, dia. 100mm (4”)
10-64838 – Cart 60/40 D Insertion A8 sets of VARIO supporting rails (4 per section)For modules 400x600mm (15¾x235/8”) Cart: 952x645xH860mm (37½x255/8x35”)Wheels: 4 pcs., swivel, dia. 100mm (4”)
13-64750-Cart Without supporting rails, but mo-dules can be placed in the top and bottom frames. Supporting rails ortelescopic runners can be mounted.Wheels: 4 pcs., swivvel, dia. 75mm (3”)Measurements in mm (inch. see below)
10-64730-Cart Without supporting rails, but mo-dules can be placed in the top and bottom frames. Supporting rails ortelescopic runners can be mounted.Wheels: 4 pcs., swivvel, dia. 75mm (3”)Measurements in mm (inch. see below)
10-64834 – Cart 60/40 D Insertion A4 sets of VARIO supporting rails (4 per section)For modules 400x600mm (15¾x235/8”) Cart: 952x645xH860mm (37½x255/8x35”)Wheels: 4 pcs., swivel, dia. 100mm (4”)
11-64040 Telescopic runners Type B400x600mm (15¾x235/8”)mounted in open steel cart per set
400
300
13-34101-Cart 40/30 insertion Dwith 4 drawer frames on telescopic runners for modules 400x300mm(11¾x15¾”). Bow door with key-lock.Foldable extension plate and high adjustable plate for computer or writing.
600
400
60
0
400
60
0
400
Accessories for open steel carts
9
5 6
7
3 4
8
8
7
6
5
4
3
2
1 2
1 11-64606-Fixed extension standFor 40/60 modular carts.In the stand can be placed modules400x300mm (11¾x15¾”) 22-34400 Laminate plate optional
1
11-64683-Extension stand, foldableWriting shelf or modules 30/40 may be inserted. Shown with module 30/40 built as chart storage unit.
11-66042 (for 40/60 carts) 11-66041 (for 30/40 carts) Foldable writing shelf
11-64610-Waste bag holderMade from bended coated wire. Lid (11-64608).Yellow bags (11-64611)
5
11-30048 -Holder for disposable glovesCan be mounted on all carts with 20 x 20 square tubing construction. For 240x130x70mm box (9½x51/8x2 ¾”).
11-64692-Container for hazardous waste 11-64690-Holder for container
11-64632 E-standMounted in modular carts with insertion B = 60/40, which makes it possible to insert 2 x 30/40 modules.
22-64418 Gallery top plateGray plastic on melamine plate.600 x 400mm (235/8x15¾”)
Accessories for open steel carts
10
5 6
7
3 4
8
8
7
6
5
4
3
2
1 2
1 11-64601 Clamp with screw for fixationFor use with accessories, transfusion (IV) pole or stand for dispenser cassettes.
11-64619-Transfusion (IV) poleWith 2 hooks for hanging solutions.
11-66031 Standwith 6 hooks for infusion bottles/bagsFitted in two clamps with handscrew.
11-64666 - Stand11-66008 for D frames) for the hanging of dispenser cassettesCassettes, 3 partitions, 41-50073Cassettes, 4 partitions, 41-50074Cassettes, 5 partitions, 41-50075Cassettes, 6 partitions, 41-50076
11-66336-Dispenser cassetteswith 6 partitions.Color white - partitions transparentW 600xH 112xD 74mm (235/8 x43/8 x 3”)
11-66335-Dispenser cassetteswith 5 partitions.Color white - partitions transparentW 600xH 162xD 108mm (235/8 x63/8 x4¼”)
11-66334-Dispenser cassetteswith 4 partitions.Color white - partitions transparentW 600xH 207xD 135mm (235/8 x81/8 x53/8 ”)
11-64688 Holder in aluminium for sutur boxes
Material Properties
EP
ABS
LAM
MEL
PA
PC
PMMA
PPO
PS
PVC
RIL
SS
*Avoid high temperatures and longer delays in washing machines than the figures above.
“Material properties” are obtained from our suppliers. This must be considered as a guide and no responibility can be accepted by Scan Modul System for any errors and omissions. You can obtain further technical information by approaching Scan Modul System directly or one of our representatives.
Material Properties according to the norms below: Steel round and flat oval: DIN 2394 Steel profiled: SIN SEL 065-67 Stainless profile steel tube: DIN 4301 Acid resistant profile stainless steel: DIN 4401SteelCleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Abrasion resistance. Tough and hard. Good dimension stability. Thermal : Max. continuous + 110C Max. short-term. + 120CPolyphenylenoxideChemical tolerance: Stands weak acid and bases avoid solvents.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Rigid, tough, hard wearing and impact resistant. A smooth surface finish structually stable. Thermal : Max. continuous + 70C Max. short-term. + 90CAcrylnitrile-Butadiene-StyreneChemical tolerance: Stands some weak acid, bases, oil and fats. Avoid solvents.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: As coating powder on steel, good mechanical strength, hard, stiff and tough. Thermal : Max. continuous + 100C Max. short-term. + 120CEpoxyChemical tolerance: Good towards bases, limited towards strong acid.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Sturdy and hard-wearing surface, stands normal impact influences. Thermal : Max. continuous + 150C Max. short-term. + 180CLaminate
Chemical tolerance: Limited towards weak acid and bases.Cleaning: Wipe clean with damp cloth.
Material Properties: Hard -wearing, stands smaller impact influences. Thermal :Max. Not over +40CMelamineChemical tolerance: Limited resistant towards weak acid and bases.Cleaning: Do not wash in automatic washing plants, wiping off with the most common detergents and disinfectants on the market.
Material Properties: Very impact resistant, hard- wearing, withstands repeated flexing. Thermal : Max. continuous + 105C Max. short-term. + 150CPolyamidChemical tolerance: Good towards fuels, lubricants and some solvents.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Stiff, tough, hard. Very high impact resistance. Unbreakable. Can be autoclaved. Thermal : Max. continuous + 125C Max. short-term. + 140CPolycarbonateChemical tolerance: Resistant towards oils and fats. Poor towards strong acids and bases.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Strong, rigid and stiff. Clarily with 90% light transmission UV-stable. Thermal : Max. continuous + 70C Max. short-term. + 90CPolymethylmethacrylate Chemical tolerance: Stands weak acid and bases and non polar solvents.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Strong, rigid and hard wearing with good impact resistance. Thermal : Max. continuous + 60C Max. short-term. + 65CPolystyrene Chemical tolerance: Resistant towards water, acids and bases. No strong oxidised acids.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Rigid, tough, hard. In stabilised form high impact resistance. Fine surface finish. Thermal : Max. continuous + 60C Max. short-term. + 75CPolyvinylchlorideChemical tolerance: Good resistance towards acids and bases. Limited towards some solvents.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: As surface coating on steel very hard, durable and impact resistance. UV resistance. Thermal : Max. continuous + 80C Max. short-term. +100CRilsanChemical tolerance: Insoluble in water and most organic solvents.Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
11
Sca
n M
odul
Sys
tem
rese
rves
the
right
to m
ake
alte
ratio
ns w
ithou
t prio
r no
tice.
SM
S M
arke
ting
. 050
6 -
05-6
5010
.UK
.Ver
sion
1
CHILETEL +56 2223 [email protected]
AUSTRIATEL +49 74 61 9674 [email protected]
BELGIUMTEL +32 3 457 67 [email protected]
CANADATEL +1 450 628 [email protected]
ICELANDTEL +354 569 [email protected]
GERMANYTEL +49 74 61 9674 [email protected]
FRANCETEL +33 474 990 [email protected]
HONG KONGTEL +852 23 95 63 [email protected]
NETHERLANDSTEL +31 306 345 [email protected]
ITALY (the Tyrol)TEL +49 74 61 9674 [email protected]
JAPANTEL +81 93 963 [email protected]
IRELANDTEL +353 1 836 [email protected]
POLANDTEL +49 74 61 9674 [email protected]
SWITZERLANDTEL +41 61 301 63 [email protected]
NORWAYTEL +47 22 63 01 [email protected]
PORTUGALTEL +351 21 916 76 [email protected]
UNITED KINGDOMTEL +44 870 770 [email protected]
SWEDENTEL +46 8 702 99 [email protected]
SPAINTEL +34 93 244 00 [email protected]
U.S.A.TEL +1 631 273 [email protected]
GREECETEL +30 210 69 84 775 - [email protected]
AUSTRALIATEL +61 (0) 3 6229 [email protected]
DENMARKTEL +45 48 22 88 [email protected]
ITALY TEL +39 0458 378 [email protected]
Designed w
ith care - for people who care
REPRESENTED IN:
SCAN MODUL SYSTEMRØNNEVANGS ALLÉ 8 3400 HILLERØDDENMARKTEL + 45 48 22 88 77FAX + 45 48 22 88 07E-MAIL [email protected]