7/30/2019 Scheda TCH Tiranti ENG
1/2
Call Management
Firmware
Touch 3,5 & 10 Control
Product Description
Via G.Toniolo, 28
30030 Vigonovo (VE)
www.stitalia.com [email protected]
Take the advantage of Bticino technology :
Using a simple touch screen Bticino Model H4684
or H4690, after installing the firmware "Call Mana-
gement", you can give a valid and simple solution
to managing calls, in environments like schools,
hotels or communities.
Using an intuitive graphical interface you can
monitor the status of calls made by the tie rods,
generate audible alarms, mute them, and turn ona tranquilization
light, all leveraging the proven
qualities of solidity and reliability of a system Bticino
My Home.
The additional functionality provided by this
firmware expand the capabilities, flexibility and
offer of supply facilities Bticino My Home, making
the call management easy and inexpensive, ex-
ploiting the present system.
A concrete example of this can be easily under-
stood in the case of an hotel, the centralization of
alarms, the ability to record them with date, time
and number of room allows to certify the plant foruse of the new
DPR thus allowing to obtain a more
one star in the evaluation of the structure, with a
low cost.
What is necessary to use with My Home :
In order to realize the potential benefits the follo-
wing physical components must be present in the
installation, as shown by the diagram at bottom of
page.
It uses a command 3477 with the rod attached to
it that generates the call and the reset button of
the call.
As a visual signal is used an F411 / 2 that turn onthe light of
tranquillisation within inside the room
affected and the light detection alarm outside the
environment from which the call originated.
When an event will appear in the H4684 and
H4690 touch, that has been installed and configu-
red the firmware "Call Management", the screen
show you the call pages, which will be accompa-
nied by a two-tone differently alarm, depending
on the type of call (room or bathroom).
This will be represented with the number and de-
scription of the environment on, accompanied the
hour and date of the event.It present a red band which, if
present more than
one events, displayed alarms contemporaries as
long as alarms will be reset to disappear from the
list.
F411/23477
H4684
7/30/2019 Scheda TCH Tiranti ENG
2/2
Call Management
Firmware
Touch 3,5 & 10 Control
Product Description
Via G.Toniolo, 28
30030 Vigonovo (VE)
www.stitalia.com [email protected]
Record the event log :
Thanks to a download software the log events
can be exported automatically to a single XML da-
tabase.
With the firmware "Call Management" you can
generate reports very accurate and configurable,
allowing to obtain a clear and detailed work, and
an assessment of the viability and efficiency of the
operators.
The archiving of events to the XML database is
simple and transparent. The GUI Firmware "Call Ma-
nagement" with a warning icon will indicate that
the memory is full of reports (about 3020 events
logged) and that we must proceed to download
on a personal computer.
The physical connection that allows the down-
loading of data is the ethernet port in the back of
the touch screen, connected on a present net-
work or directly to PC with Cross cable.
This allows you to downloading without moving or
removing the touch from the wall.The software to download data
on personal
computers running only on Windows platform.Example of Firmware
Call Management for
Touch 3,5 & 10
F411/23477
